Develop Bugs

Samsung Galaxy S3 Genuine TPU Clear Ultra Thin Case Review

Another case review for the S3, this time its a Genuine Samsung TPU Clear Ultra Thin Case - SAMGSVTPUCL
Youtube Link

Does what its set out to do. I have already ordered one to have in order to cover all aspects of he phone from scratches really.
A proper protection case would be the otterbox one
sent with WSGS3

vasp3690 said:
Does what its set out to do. I have already ordered one to have in order to cover all aspects of he phone from scratches really.
A proper protection case would be the otterbox one
sent with WSGS3
Click to expand...
Click to collapse
Yeah overall it's a decent case. Just not a lot for your money compared to some cases.
Sent from my GT-I9300 using XDA

When they say twin pack, do they give you 2? Blue and white?
I was thinking of a tpu but used one for a couple of days but didn't like it.
sent with WSGS3

vasp3690 said:
When they say twin pack, do they give you 2? Blue and white?
I was thinking of a tpu but used one for a couple of days but didn't like it.
sent with WSGS3
Click to expand...
Click to collapse
I don't know I only got a single one, looks like the twin back is 2 of the same colour to me though.

Cool.
Many thanks for the review
sent with WSGS3

vasp3690 said:
Cool.
Many thanks for the review
sent with WSGS3
Click to expand...
Click to collapse
No worries, Got a few more to record over the next few days.
Sent from my GT-I9300 using XDA

I think its personal preference. I bought the rock and didn't like it. With the slimyou get 2 cases at 15£ so it takes it to the same price really and also covers the phone all around.
sent with WSGS3

Putting the Rock and Metal-Slim next to each other I can't see a difference

Which one is the metal slim? Not a samsung original is it?
sent with WSGS3

vasp3690 said:
Which one is the metal slim? Not a samsung original is it?
sent with WSGS3
Click to expand...
Click to collapse
No it's not Samsung. It's this one
Youtube Link
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I can confirm you get two cases.
One is transparant with stripe motive the other is transparant with dots.
It's a nice case for just protecting the back of the phone when put on a table but nothing more.

LollieLaurie said:
I can confirm you get two cases.
One is transparant with stripe motive the other is transparant with dots.
It's a nice case for just protecting the back of the phone when put on a table but nothing more.
Click to expand...
Click to collapse
Oh is that the twin pack from mobilefun?

Oli2k said:
Oh is that the twin pack from mobilefun?
Click to expand...
Click to collapse
Yes the twinpack indeed
The one from the video is the stripe one, you also get the same but with square dots.

tradesteady said:
thanks for the review yet should we buy a genuine one at a higher price instead of buying from a third party with a reasonable price, such as Rock Quicksand Galaxy S3 case which also enjoy a good reputation not worse than the original ones as you could see here:
http://www.slickfans.com/gray-rock-quicksand-case-for-galaxy-s3-i9300-with-matt-cover_p1728.html
Click to expand...
Click to collapse
look nice , will consider abt. it ! thanks for shared it here

LollieLaurie said:
Yes the twinpack indeed
The one from the video is the stripe one, you also get the same but with square dots.
Click to expand...
Click to collapse
Be nice if they did multi colour packs as well. The clear is nice though.
Sent from my GT-I9300 using xda app-developers app

Been sporting this case for about a week and a bit...great slim fit and easy to hold. Only issue I have is dirt getting into the 2 little holes on the top right (for a lanyard or mobile charm)...that edge is also slightly raised when compared to the other 3 edges...have had to take off the case every 2nd day for a wipe as I;m conscious of heairline scratches on the plastic...otherwise a great case!

thewhitetower said:
Been sporting this case for about a week and a bit...great slim fit and easy to hold. Only issue I have is dirt getting into the 2 little holes on the top right (for a lanyard or mobile charm)...that edge is also slightly raised when compared to the other 3 edges...have had to take off the case every 2nd day for a wipe as I;m conscious of heairline scratches on the plastic...otherwise a great case!
Click to expand...
Click to collapse
Now that you say that, I did notice that myself!
sent with WSGS3

vasp3690 said:
Now that you say that, I did notice that myself!
sent with WSGS3
Click to expand...
Click to collapse
Amazing what you notice when someone.points it out lol
Has everyone gone for the clear version?
Sent from my GT-I9300 using xda app-developers app

thewhitetower said:
Been sporting this case for about a week and a bit...great slim fit and easy to hold. Only issue I have is dirt getting into the 2 little holes on the top right (for a lanyard or mobile charm)...that edge is also slightly raised when compared to the other 3 edges...have had to take off the case every 2nd day for a wipe as I;m conscious of heairline scratches on the plastic...otherwise a great case!
Click to expand...
Click to collapse
I put some clear scotch tape over those holes from the inside. Dirt doesn't bother me no more
Sent from my GT-I9300 using xda app-developers app

FULL Bamboo Case, NOT ORIGINAL! PICS UP!

Found this on Amazon. Couldn't help but order it. Less than $15 shipped and real wood! Received it today. I'm actually quite impressed with it. Forgot to mention, shipping said 14-31 business days but I received it in one week.
Pros:
-Real Wood
-Looks great
-Great fit
-Low Price
-Crafted well
Cons:
-A bit thick. Makes the phone a little bit big (with an already big phone) in the hand.
-Power port cutout is a little small. One of my old cables wouldn't fit.
-Due to thickness, it can be a little tough to reach the power and volume buttons.
-No 'snap' to hold the case together. It just slides, I don't know if it would wear fast or not. There is, however, a metal plan with nobbies on it that help hold it in place.
As promised, here are pictures. The first 2 are with and without flash to get a good look at the wood tone. I think it looks great.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Looks good, very interested please do post pictures to soon

Nice looking case, except how the wood looks like it's clumsily glued together in the middle. Does it look like that in person?

sandels said:
Nice looking case, except how the wood looks like it's clumsily glued together in the middle. Does it look like that in person?
Click to expand...
Click to collapse
That isn't where it glues together, that is where you snap the case together. Pictures should be up shortly.

Looks like a nice case although the line is very visible. I guess thats better than having a hard snap on case where u have to force the phone to be removed.

zephiK said:
Looks like a nice case although the line is very visible. I guess thats better than having a hard snap on case where u have to force the phone to be removed.
Click to expand...
Click to collapse
Agreed the line is very visible but you have to keep in mine that this is wood, not plastic. Wood can't be molded like plastic, it's crafted.

I'm very interested, does the cover have lips in case you put your telephone face down on the table?
And if you have a 0.3mm tempered glass screen protector?

ptolomeo said:
I'm very interested, does the cover have lips in case you put your telephone face down on the table?
And if you have a 0.3mm tempered glass screen protector?
Click to expand...
Click to collapse
Using it with a .32mm thick tempered glass screen protector. Lip is big enough to clear my screen protector.

setzer715 said:
Using it with a .32mm thick tempered glass screen protector. Lip is big enough to clear my screen protector.
Click to expand...
Click to collapse
Thank you very much; I've ordered mine too.
I prefer it over the 'original' back cover bamboo case because the original one shows a bit of brown plastic and also I think (the original one) is meant to be used without any cover case to show the beautyness of the bamboo cover.
As this is a true COVER, I think it will protect our phones a bit, and as you confirmed it allows the use of a glass screen protector, I think it's perfect.
I'm a bit concerned because of the mechanism to separate the two pieces of the cover, but I think I won't doubt to glue them together if necessary (as the cover is cheap and the battery is not removable...)
Thank you for sharing this piece of natural art...

How does the cover hold in place still a bit confused. Is there A mechanism or requires actual glue?
Sent from my A0001 using XDA Free mobile app

tssphysicsboi said:
How does the cover hold in place still a bit confused. Is there A mechanism or requires actual glue?
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
http://i559.photobucket.com/albums/ss32/setzer715/Oneplus One Bamboo Case/DSC02237_zps47abcf63.jpg you can see it kind of "tacts" the 2 pieces together.

zephiK said:
http://i559.photobucket.com/albums/ss32/setzer715/Oneplus One Bamboo Case/DSC02237_zps47abcf63.jpg you can see it kind of "tacts" the 2 pieces together.
Click to expand...
Click to collapse
Mechanical? Like it clicks into place?
Edit: never mind, answered in the OP
Sent via quantum entanglement, focused through my OnePlus One.

Aw man :/
Sent via quantum entanglement, focused through my OnePlus One.

I have had bad experience with slide on cases in the past... Next thing you know you have a nicely straight scratch on your phone. You have to be extra careful putting it on and taking it off. Good looking case tho.

There's a few different places to get it from in UK. Good find. Just waiting till a few people get it and give there opinions

vnphantom said:
I have had bad experience with slide on cases in the past... Next thing you know you have a nicely straight scratch on your phone. You have to be extra careful putting it on and taking it off. Good looking case tho.
Click to expand...
Click to collapse
The inside is felt lined. No scratches to date. I've removed it several times.

Ugh no one on eBay will ship to Hong Kong... What gives...
Sent from my A0001 using XDA Free mobile app

Really interesting case... real wood. WOW!

bammbo case
tssphysicsboi said:
Ugh no one on eBay will ship to Hong Kong... What gives...
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
Hey I will order one for me if they ship them to Spain if you like one I will order two and send it to you

Why no hong kong?
tssphysicsboi said:
Ugh no one on eBay will ship to Hong Kong... What gives...
Click to expand...
Click to collapse
I am in the same boat. Ships from Hong Kong, but never to Hong Kong. This is pretty darn ridiculous. There must be someway that isn't crazy hard or expensive to get this case into my hands in HK...

Tech21 Case came in today!!

Was a little pricey but love it!! Looks and feels great!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my LG-H918 using Tapatalk

bigmase23 said:
Was a little pricey but love it!! Looks and feels great! ??????
Click to expand...
Click to collapse
I got the same case today. I love it. Looks great and will do a great job protecting it. I was able to trade in my note 7 case for it.

Guys few questios:
Does it feel bulky?
Is it hard to press volume buttons?
Looks shinny, doesn't it?
Thx

netgar said:
Guys few questios:
Does it feel bulky?
Is it hard to press volume buttons?
Looks shinny, doesn't it?
Thx
Click to expand...
Click to collapse
It doesn't feel too bulky. I really like the size with it on. Volume buttons work great! It is shiny but I like how you can still see through the case to see the v20 on the back.

Agreed! And it isn't slippery!
Sent from my LG-H918 using Tapatalk

Thx my friends

I almost purchased one last night until I viewed the camera lense protection. It's pretty much flush with the case. With all hand full of v20 camera lense shatters being reported I feel the lense should be recessed a little more.
The case did have fantastic protection around the outside edges. Best I have seen to date for a V20, the phone would literally bounce when hitting the ground.

I got that same case when I bought the phone, I like it a lot and it reminds me of a ringke case (my favorite case maker and my last 3 phones have used them) i noticed that the large cutouts on the bottom actually fit my pinky well when holding the phone with one hand.
I normally wouldn't get a case from the store since they are so over priced compared to online but this phone was too slippery to risk waiting for a case to arrive in the mail.

naturecannon said:
I almost purchased one last night until I viewed the camera lense protection. It's pretty much flush with the case. With all hand full of v20 camera lense shatters being reported I feel the lense should be recessed a little more.
The case did have fantastic protection around the outside edges. Best I have seen to date for a V20, the phone would literally bounce when hitting the ground.
Click to expand...
Click to collapse
Any suggestions for a slim case that protects the camera lenses well?

haris163 said:
Any suggestions for a slim case that protects the camera lenses well?
Click to expand...
Click to collapse
I just picked up a UAG at my local ATT yesterday. They just got them in. Case is above camera lense at estimated 3/16 of an inch. I like it a lot and not too large. Call around maybe you can go compare at your local ATT and decide which you like best

I got the Ringke ONYX in the mist gray color. It matches the phone well, and protects the camera (my phone took a 5' drop flat on its back onto concrete last night).
$12 on eBay http://www.ebay.com/itm/262639593269

[/COLOR]
naturecannon said:
I just picked up a UAG at my local ATT yesterday. They just got them in. Case is above camera lense at estimated 3/16 of an inch. I like it a lot and not too large. Call around maybe you can go compare at your local ATT and decide which you like best
Click to expand...
Click to collapse
Wow I can't believe someone actually got these in stock! I'll definitely check around to see if any att stores have them me.

I got the Ringke Fushion with Smoked Black Bumpers...matches well with the Titan LGV20.

haris163 said:
Any suggestions for a slim case that protects the camera lenses well?
Click to expand...
Click to collapse
I have this case in my phone and just dropped it on the back from about 3 ft into tile with no damage.https://www.amazon.com/gp/aw/d/B01LPQXYT6/ref=yo_ii_img?ie=UTF8&psc=1
Sent from my LG-H918 using XDA-Developers mobile app

Unheard said:
I got the Ringke ONYX in the mist gray color. It matches the phone well, and protects the camera (my phone took a 5' drop flat on its back onto concrete last night).
$12 on eBay http://www.ebay.com/itm/262639593269
Click to expand...
Click to collapse
I went with the midnight blue. Feels very secure when holding and color looks good in my titan v20
Sent from my Pixel C using Tapatalk

bigmase23 said:
Was a little pricey but love it!! Looks and feels great!
Sent from my LG-H918 using Tapatalk
Click to expand...
Click to collapse
Where did you get the tech21 case from? I can't find them on Ebay or Amazon? Can you provide a link, please?

bigmase23 said:
Was a little pricey but love it!! Looks and feels great!
Sent from my LG-H918 using Tapatalk
Click to expand...
Click to collapse
umlbiotek75 said:
I got the same case today. I love it. Looks great and will do a great job protecting it. I was able to trade in my note 7 case for it.
Click to expand...
Click to collapse
Where did you get it from?? I've looking all over for it. It 's not even available on the tech21 website

Tmobile carries it.

I'm late, but I can say that the tech21 case is pretty good. It looks cool, nice to hold, does a good job of protecting the phone. I would trust the Case-Mate Tough I had on my Galaxy Nexus even more, but that thing increased the size of the phone a lot. Fine for a small phone, but with the V20 that would have been way too much. I've also had a Spigen Neo Hybrid on my G5, but that too was flawed. It was slippery and the shape was uncomfortable in the hand... there was a sharp corner.
So the tech21 is perhaps the best case I've ever had.

thinnest case

Let's not make this already huge phone any bigger... Anyone know of ultra thin cases? Like Peel/Calicase at .3mm?

Case

WAIDroid said:
Case
Click to expand...
Click to collapse
Yea these are ok but not as thin as they look. Peel/Calicase type is.3mm.

km8j said:
Yea these are ok but not as thin as they look. Peel/Calicase type is.3mm.
Click to expand...
Click to collapse
May I ask why you want a case that thin?

WAIDroid said:
May I ask why you want a case that thin?
Click to expand...
Click to collapse
These cases are pretty popular. Phones are too big as it is. A lot of people aren't looking for big cases to protect against huge damage. 1) I'm very careful 2) my credit card company provides free insurance with a $25 deductible so long as the monthly plan is paid on that card. 3) on T-Mobile jump on demand, when you turn the phone in, it doesn't have to be in mint condition 4) the G6 in particular is very durable, having passed some military testing and a recent video showed it going through a washing machine undamaged
All that being said, I'm just interested in giving it some extra grip and protection against minor scratches and bumps/dings. I'll also use a clear skin but those tend to peel off over time

km8j said:
These cases are pretty popular. Phones are too big as it is. A lot of people aren't looking for big cases to protect against huge damage. 1) I'm very careful 2) my credit card company provides free insurance with a $25 deductible so long as the monthly plan is paid on that card. 3) on T-Mobile jump on demand, when you turn the phone in, it doesn't have to be in mint condition 4) the G6 in particular is very durable, having passed some military testing and a recent video showed it going through a washing machine undamaged
All that being said, I'm just interested in giving it some extra grip and protection against minor scratches and bumps/dings. I'll also use a clear skin but those tend to peel off over time
Click to expand...
Click to collapse
The sad thing is most sites don't display the dimensions to the cases so unable to find some cases

WAIDroid said:
The sad thing is most sites don't display the dimensions to the cases so unable to find some cases
Click to expand...
Click to collapse
Most products in this thickness range proudly advertise the thinness but you are correct in general

Anything like a Ringke Slim? Hard plastic that covers all sides.

mangordi8901 said:
Anything like a Ringke Slim? Hard plastic that covers all sides.
Click to expand...
Click to collapse
That's about 5x as thick as a Peel

km8j said:
Yea these are ok but not as thin as they look. Peel/Calicase type is.3mm.
Click to expand...
Click to collapse
This one is .045" thin,a negligible amount considering the slim profile & the overall width/thickness of the phone:
https://www.amazon.com/Bear-Motion-LG-G6-Release/dp/B06XCFHYYW?th=1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

KOLIOSIS said:
This one is .045" thin,a negligible amount considering the slim profile & the overall width/thickness of the phone:
https://www.amazon.com/Bear-Motion-LG-G6-Release/dp/B06XCFHYYW?th=1
Click to expand...
Click to collapse
I have this one saved in my amazon cart. There are a few others as well... I'll link in a min.

We have ordered the Spigen ultra clear case, have had them on our note 5's and s7 edges, and they are VERY thin, but have saved our phones when dropped a few times face down, and on the edges. I get the cases in today, the exact day my phone is arriving also. makes me happy!

My go to case for thin
Spigen
https://www.amazon.com/gp/product/B01N6T3N9T/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

Ordered this one today:
https://www.amazon.com/gp/product/B01NBWSX8S/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

rfarrah said:
Ordered this one today:
https://www.amazon.com/gp/product/B01NBWSX8S/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
I have this one and it lifts my dmax tempered screen protector.

blitz911 said:
I have this one and it lifts my dmax tempered screen protector.
Click to expand...
Click to collapse
Uh-oh

If you want thin these are the thinnest cases you can buyhttp://www.ebay.com/itm/391546362127?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

techrider6262 said:
If you want thin these are the thinnest cases you can buyhttp://www.ebay.com/itm/391546362127?_trksid=p2055119.m1438.l2649&ssPageName=STRK:MEBIDX:IT
Click to expand...
Click to collapse
Doesn't seem to be as thin as the Bear case. And for me, I truly hate TPU. Feels and looks like those damn jellies girls use to wear on their feet.
Sent from my SM-N920T using XDA Labs

The Apostle said:
Doesn't seem to be as thin as the Bear case. And for me, I truly hate TPU. Feels and looks like those damn jellies girls use to wear on their feet.
Sent from my SM-N920T using XDA Labs
Click to expand...
Click to collapse
I've been using them on all my phone for the last 4 years very thin and don't feel like a jell.I don't use teddy bear cases sorry.

techrider6262 said:
I've been using them on all my phone for the last 4 years very thin and don't feel like a jell.
Click to expand...
Click to collapse
Jellies are a soft plastic Sandle. Similar feel as TPU. Just not for me.
Sent from my SM-N920T using XDA Labs

Pitaka's Thinnest Protective Made from Kevlar/Aramid for Pixel 2s

I just got the case, love it !!! quality is just as expected from kevlar cases. The camera is flushed with the case (i feel that it is slightly, just slightly raised to protect the camera which is a plus).
The lips of the case is not raise up to protect the screen though, but the edge is perfectly cut to the metal sides which makes it feels really natural to hold. If it is raised further, i think dust can be easily trap in side like the original google case so i think its fine for me, personally.
NOTE: this is not a carbon fibre case, its made of 100% kevlar/aramid. Carbon fibre as a case would have interference with signals.
PROTIP: when trying to remove the case, work from the buttom edge and slowly upwards along the power/volume side (i find it slightly easier on this side).
MOD EDIT: LINK REMOVED
Per the forum rules, posting affiliate links on XDA is not allowed:
13. Advertising and Income Generation
Commercial advertising, advertising referral links, pay-per-click links, all forms of crypto-mining and other income generating methods are forbidden. Do not use XDA-Developers as a means to make money.
Click to expand...
Click to collapse
THREAD CLOSED
Let the pictures do that talking
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

you are welcome i will do a brief review when i get the case, i have high hopes of it in terms of slimness, weight and texture.

Also ordered one, thanks for posting!

no problem man, hopefully, it comes with a tempered glass protector.
because i have seen some reviews/unboxing on magcase for iphone 7, they did come with it.
fingers crossed!
update: no tempered glass included in package.. dang oh well

Wow. Really promising. **** it. Ordered.
Sent from my Pixel 2 XL using Tapatalk

Ordered it since 10 days. But its not released yet or shipped.. I remember the 13th of this month was mentioned as a release day.. I tried it before with another device, very very slim but high quality.. Real carbon fiber.. Very minimal.. But very tough.. And it has the coils impeded for the magnet car holder..

Found the case yesterday on the web by coincidence...as they offer free shipping also to Eureop, I've ordered one, as I am looking for a thin case. Also have a Spigen Thin Fit but the Spigen is probably not as durable as the Pitaka.
Now I only need a decent tempered glass for the Pixel 2XL and then I am ready to receive it next week.

I wonder if this case will work with a dbrand skin on?

Taebom said:
I wonder if this case will work with a dbrand skin on?
Click to expand...
Click to collapse
I assume it would because dbrand skin is literally a really thin piece of sticker but if u want to remove the case, u gotta remove it carefully as edges of the sticker is still protruding a just little.. well that's my guess

is the case thick enough to protect the camera lens?

ayce said:
is the case thick enough to protect the camera lens?
Click to expand...
Click to collapse
Thats a very good question, but they should have taken that in consideration, coz they did with there iPhone cases

When someone gets this case, please post some pics of the camera coverage and the sxreen/case edge areas. Thanks

Interesting, so this thin case has metal plates in it? I would not be using it in my car.

Will it interfere with NFC though.

galaxys said:
Interesting, so this thin case has metal plates in it? I would not be using it in my car.
Click to expand...
Click to collapse
Eh?
Sent from my Pixel 2 XL using Tapatalk

Nekromantik said:
Will it interfere with NFC though.
Click to expand...
Click to collapse
No pixel nfc component is around the glass area of the phone but the metal is embedded around the middle area of the case.

machostallion said:
When someone gets this case, please post some pics of the camera coverage and the sxreen/case edge areas. Thanks
Click to expand...
Click to collapse
Yeah man I promised that I will update you on ur thread haha
galaxys said:
Interesting, so this thin case has metal plates in it? I would not be using it in my car.
Click to expand...
Click to collapse
It's there to make it compatible with their car mount but doesn't affect the thickness, flushed within the case

Amjad.AbdulGhani said:
Thats a very good question, but they should have taken that in consideration, coz they did with there iPhone cases
Click to expand...
Click to collapse
Just asked them if it sits flush with camera lense and they said yes :/

I'll wait for the review but I think MNML nailed it by raising the fingerprint sensor, effectively protecting the lens because of the angle it creates with the edge. Even though the case itself sits flush with the lens.
And it's really less expensive.
Sent from my Pixel 2 XL using Tapatalk

Taebom said:
Just asked them if it sits flush with camera lense and they said yes :/
Click to expand...
Click to collapse
As long as it protects the camera.. So am assuming its as think as the camera bump or so.. That fine with me.. But again will wait to see it in hand..