Related
OK the HTC ARIA has been around for a while now and one of the most pertinent objectives is screen protection. That having been said I think it's a good idea to poll people to find what cases and screen protectors have been handeling the masses needs.
I will put my 2 cents in here, starting the poll.
My daughters ARIA started out w/ a Zagg screen protector and Amizer case. Much to my chagrin the case fell apart. She never told me and the first time she dropped it, the screen shattered (though the Zagg screen protector did keep it in place) It's being replaced now and I hope to have a different one when she gets it back. I look forward to your thoughts and purchases. Good bad or indifferent
tomween1 said:
OK the HTC ARIA has been around for a while now and one of the most pertinent objectives is screen protection. That having been said I think it's a good idea to poll people to find what cases and screen protectors have been handeling the masses needs.
I will put my 2 cents in here, starting the poll.
My daughters ARIA started out w/ a Zagg screen protector and Amizer case. Much to my chagrin the case fell apart. She never told me and the first time she dropped it, the screen shattered (though the Zagg screen protector did keep it in place) It's being replaced now and I hope to have a different one when she gets it back. I look forward to your thoughts and purchases. Good bad or indifferent
Click to expand...
Click to collapse
My opinions:
The Aria is at its best without a case - it feels great in the hand and looks nice too.
I have a case I use occasionally. It is a TPU HTC-branded skin-like cover. It was less than $10 at Amazon, and fits perfectly. It only covers the back and sides, with cutouts for all the Aria external connections/controls. It makes the phone a bit more bulky, but it is about as thin as you can get. Slightly covers the edges where the glass screen meets the back
I don't use a screen protector (like Zagg). I'm tempted, but with a glass screen, I don't know how much it'll get scratched without one.
Again, just my opinions...
I too wouldn't bother with a case for this phone, I really don't see the need.
I would always use a screen protector. I know these screens are glass (even Gorilla Glass I think?) but they are not impervious to damage. You just know the first time it slips out of your hand and goes skating down the asphalt you are gonna wish you had one on because it WILL leave scratches!
As far as screen protectors go, I've used 'em all over the years and firmly believe the 'wet apply' ones like Zagg are the best. However, out of this style of screen protector I think Zagg is the worst - thick and rubbery and will give you orange-peel effect.
I personally use Bodyguardz and love them! Phantomskinz are also good and with both of these companies you get 2 sets for the price of Zagg's 1 set and a lifetime replacement warranty. Also with Bodyguardz, when you sign up and order you then get 20% off all subsequent orders.
http://www.bodyguardz.com/htc-aria-cases-screen-protectors-covers-shields-skins-films.html
http://phantomskinz.com/search.aspx?find=htc+aria
Good luck!
The amzer case is really good if you have a screen protector. It kind of leaves indents on my Aria, so I don't know if it'll scratch the glass. Best to get a screen protector regardless.
People say the case sucks because it's hard to take off, but theres a trick to it, just pull from the bottom left edge of the front frame. I've dropped my Aria almost 12 times. Still perfect, Its been 6 months. The matte finish does get worn though.
Hi everyone. I searched the forums for screen protectors, and what I found was a whole lot of threads on various screen protectors out there, but nothing centralizing these discussions. So I thought I'd create this thread.
1. What type of screen protector do you use?
2. How has it held up?
3. Have you gone without a screen protector?
4. If so, do you have any scratches?
5. What's the most you have paid for one?
6. What's the cheapest you have paid for one?
7. Any Rants? Any Raves?
8. Any you would recommend?
9. Any you would want to try?
10. Any tips to putting certain ones on?
Let's help each other out by sharing our knowledge on screen protectors for the HTC One.
Top screen protectors according to you guys.
1. Mime Feather Glass Screen Protector - $27.95 http://mimeusa.com/product/htc-one-feather-glass-tempered-glass-screen-protector/
2. Zagg Clear HD Screen - $19.99 http://www.zagg.com/invisibleshield/htc-one-cases-screen-protectors-covers-skins-shields
3. Verizon 3 Pack Anti-scratch Protectors - $12.99 http://www.verizonwireless.com/acce...-protectors-3-pack-w-screen-wipe-for-htc-one/
Installation videos
1. Android Authority demonstrating how to install wet and dry screen protectors such as the Zagg and ScreenWear http://youtu.be/sf0a-c7WH8U
2. Danny Winget demonstrating how to install a glass screen protector such as the Spigen Glass http://youtu.be/F4_wtcmWVv4
Reviews via Amazon
1. Zagg HD http://www.amazon.com/ZAGG-HDHTCM7S...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
2. Zagg Original http://www.amazon.com/ZAGG-HTCM7S-i...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
3. Mime Ghost Glass http://www.amazon.com/MIME-Tempered...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
4. AmFilm http://www.amazon.com/Protector-Inv...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
5. Tech Armor http://www.amazon.com/Tech-Armor-De...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
6. Skinomi http://www.amazon.com/Skinomi-TechS...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
Drop Test
1. Zagg Shield drop test http://youtu.be/NxcUMZ4bTCM
2. Tempered Glass drop test http://youtu.be/33T1Qun7jsQ
Zagg HTC One High Def Screen Protector - Amazon
I think Zagg makes the best screen protectors, I have used them on both the HTC Droid Incredible and the HTC One. The Zagg screen protectors are not the cheapest option for screen protectors especially if you go for the ultra clear model but I think the cost is worth it, especially since zagg offers warranty replacements, you only pay for shipping. With the warranty replacements, registering your product on the Zagg website is quick and easy, there are no serial numbers you need to have or anything, you only need to tell them what device you got it for and which model screen protector you got.
Another benefit of the zagg shields is the lifetime of the screen protector, in my experience the screen protectors lasted almost 2 years for my Droid Incredible before I replaced it, the screen protector started to come off around the edges of my phone. While the screen protectors do age, I would much prefer the aged screen protector opposed to any damage to my screen. In my entire life of my Droid Incredible, bought in April 2010 and still used as an e-reader by my girlfriend today, there is not one scratch on the screen thanks to the Zagg shield.
While I have not personally tried the Verizon 3 pack of screen protectors, I have had friends use them and they were disappointed with the quality of them, the biggest issue was having the screen protector stay on.
Zagg screen protectors have done such a great job in my opinion I have not wanted or even thought of trying another brand.
As for tips to putting the Zagg brand on, make sure you wash your hands before you do anything, clean the screen so their is no oil, fingerprints, dust or anything else on the phone, make sure the spray gets on both the screen protector and the screen but do not soak either, just enough spray to cover the phone and protector. I found it best when applying the screen protector to start at the top of the screen in one of the corners and work your way to the opposite top corner then work your way down, make sure to use the applying tool they put in the packaging, be sure to use a good amount of force when use the tool but be careful not to apply too much pressure and crack the screen.
If you do not want to try putting the screen protector on yourself, you can go to the Cell Phone employees at Best Buy and have them put the screen protector on. You do not need to purchase the protector from Best Buy, but they charge you a fee to do it. The major benefit of this is that if they screw up and ruin your protector they will replace it.
I tried the Verizon 3-pack when initially purchasing the one. While they are decent, I knew I wanted something a little more rugged.
I did some research and ended up settling on the Mime USA Feather lite tempered glass screen protector. It's super thin and flexes nicely when unboxed, so it's highly unlikely to actually shatter like other tempered glass protectors. It's extremely scratch resistent. I tested car keys, nails, and knives on the screen protector after applying it to the phone and absolutely no marks showed up. It fits perfectly to the parameters of the screen and is hardly noticable after application. I would highly recommend this product. I ordered it from the Mime USA website for about $28, they even threw in a code for free shipping!
Sent from my HTC6500LVW using xda app-developers app
I usually don't use screen protectors and whenever I put on a case, I take it off an hour later. I've had the phone for like 9 months now and the screen is fine. There are tiny little scratches but you can't notice them unless you try really hard to, they don't affect the clarity of the screen in any way. I just don't like using screen protectors because they attract finger prints and smudges so easily even when I try a more expensinve screen protector. Honestly the screen will be fine for a long time. Yes there will be extremely tiny scratches but you won't care because they're almost non-existant. But one thing to keep in mind though, is that sand is crazy harsh on the screens, so I'm extra careful when I go to the beach with my phone. That's when I suggest putting on a case and a screen protector. Because even if a tiny bit of sand getes in your pocket, it might cause a little damage. Right now my phone is brand new since I got it replaced because of a camera issue, and I just can't get myself to stick with putting on a case or screen protector, I had a screen protector on it but I took it off 2 weeks later because I miss the naked screen.
Spitfire91726 said:
I did some research and ended up settling on the Mime USA Feather lite tempered glass screen protector. It's super thin and flexes nicely when unboxed, so it's highly unlikely to actually shatter like other tempered glass protectors. It's extremely scratch resistent.
Click to expand...
Click to collapse
Reviews go with what you said. I think when I buy my next screen protector when my zagg wears down, I'm going to try one of these.
i'm using an invisible shield screen protector. Went on pretty easy, there were no bubbles, and it's pretty thick. I've only had it on for a week, so I can't say much about durability, but it's pretty good as far as a screen protector goes. I'm still very partial to those matte finish screen protectors, so i'll probably be picking up one of those in the future.
BygSii said:
Reviews go with what you said. I think when I buy my next screen protector when my zagg wears down, I'm going to try one of these.
Click to expand...
Click to collapse
Got a MIME Feather myself about a month ago or so now, and I must say that it's the best choice I've ever made as far as screen protection. I'd had a Spigen and some other tempered glass brand, but they were both just too thick and noticeable on the screen. The Feather is perfect because it's hard to even tell it's on there, plus it has the Oleophobic coating to prevent smudges and fingerprints. Seriously, don't even waste your money on another screen protector. You can't beat the MIME Feather.
tyler.durden said:
Got a MIME Feather myself about a month ago or so now, and I must say that it's the best choice I've ever made as far as screen protection. I'd had a Spigen and some other tempered glass brand, but they were both just too thick and noticeable on the screen. The Feather is perfect because it's hard to even tell it's on there, plus it has the Oleophobic coating to prevent smudges and fingerprints. Seriously, don't even waste your money on another screen protector. You can't beat the MIME Feather.
Click to expand...
Click to collapse
+1 what he said, minus the experience with Spigen. The MIME Feather is the first glass screen protector I've tried, and I don't think I'll ever use anything else. It's superb and well worth the premium price. With that on the screen and a Ballistic Shell Gel case on the rest of the phone, I don't worry about it too much.
I got a EBay $6.99, Chinese made, 0.4mm thick tempered glass screen protector a few weeks ago.
Went on really well, no bubbles and sticking down along all edges and corners. Has the beveled edges on the glass so no sharp edges.
Far better than ANY plastic one i have used on any phone. Touchscreen works well with it on.
Actually hard to notice now its on unless you run your finger from the speaker onto the screen , so the REALLY thin ones must be pretty close to invisible.
I polish up the screen every 2-3 days. Does get prints on it, so maybe the expensive ones have a better oleophobic coating??
For the price, most excellent.
astmacca said:
I got a EBay $6.99, Chinese made, 0.4mm thick tempered glass screen protector a few weeks ago.
Went on really well, no bubbles and sticking down along all edges and corners. Has the beveled edges on the glass so no sharp edges.
Far better than ANY plastic one i have used on any phone. Touchscreen works well with it on.
Actually hard to notice now its on unless you run your finger from the speaker onto the screen , so the REALLY thin ones must be pretty close to invisible.
I polish up the screen every 2-3 days. Does get prints on it, so maybe the expensive ones have a better oleophobic coating??
For the price, most excellent.
Click to expand...
Click to collapse
so it's basically putting another layer of glass on top of your screen? Like putting a slide cover on a microscope slide? I wonder if that'll make screen touching a little imprecise (or any more than having a screen protector.
xzyragon said:
so it's basically putting another layer of glass on top of your screen? Like putting a slide cover on a microscope slide? I wonder if that'll make screen touching a little imprecise (or any more than having a screen protector.
Click to expand...
Click to collapse
Its definitely putting another layer of glass on the screen. You have to be careful and get it in the right position 1st time as they dont move around once stuck down. Removing them without breaking is, i suspect, very difficult. The "tape hinge" method of application works pretty well.
I have found the touch sensitivity on mine to be great. Certainly there is no difference to the "usability" of the phone, and the smoothness an feel is as good as the original screen.
I did read one review where the buttons on screen wouldn't work with a glass screen protector, but that has certainly NOT been my experience. From what i have read the thickness of these has come down from around 0.6mm in early incarnations to something like 0.15mm and being flexible in some brands.
I got a 0.4mm one. No scratches as yet. Its supposed to be very hard (9H??). I had no issues with fitting my case on after installing the screen protector.. Its a cheap silicone and hardback model that provides good corner protection. Hopefully the screen protector will help if it falls on its face sometime.
What about Just Like Glass?
Has anyone tried it?
Didnt know protectors like the Mime feather existed. Will have to try it out.
Xeternall said:
Didnt know protectors like the Mime feather existed. Will have to try it out.
Click to expand...
Click to collapse
Just bought my first one a month ago (MIME Ghost), best screen protector I have ever used. It's definitely scratch resistant and feels like the original screen. Not sure how it will hold up to drops, but that's not something I am willing to test.
Had a friend buy some Write Guard screen protectors for his HTC One. I installed one on his HTC One. Screen protector was all ready getting all kinds of scratches in it. No Bueno.
I used the XtremeGuard screen protector for a very long time on my HTC One, but recently I decided I wanted a matte finish screen protector, so I switched to Tech Armor Anti-Glare. Feels much nicer to me and gets a lot less fingerprints and smudges.
I was using the protector that came with the UG case. After reading this thread, I picked up a MIME. Very impressed. It goes on dry, was easy to remove and reposition and left absolutly no bubles (these drive me CRAZY). It has somewhat finger print resistant and I did not heave to deal with wetting the protector, then waiting 24 hours to see if all the bubles went away. Best screen protector I have purchased and believe me, I have tried at least 20 different types over the years.
I have had no issues with the touch sensitivity. You can't even notice it's on unless you look really closely at the top edge.
Using the screen protector that came with my otterbox comuter and it is quite terrible.
The screen protector has been on since April and it is already deteriorating. The spots where I'd swype, type show heavy signs of use. With a faint finger swipe over the screen you can actually feel the difference.
Other than that, the actual performance isn't the worst. Glare and all in the sun is bad, indoors though I don't have any issues.
Will look into MIME.
Cheers,
So I've been looking for a tempered glass screen protector for my Moto X, and I'm not sure which to get, the MIME or i-Blason. So I figured that I would ask the community what they recommend.
nachtdraegan said:
So I've been looking for a tempered glass screen protector for my Moto X, and I'm not sure which to get, the MIME or i-Blason. So I figured that I would ask the community what they recommend.
Click to expand...
Click to collapse
Between the two, i-Blason. It fits much better than the mime
I have the MIME, can't say as I'm super impressed with it. I'm considering switching to the iBlason just because it's thinner. I feel like the MIME is interfering with the touch sensitivity and causing me to have to press harder than I should. Plus it's just ever so slightly too low and the curved edge interferes with the front facing camera causing a slight distortion at the top of the image. I could move it, but that's where it sits centered.
I had MIME, dropped my MotoX couple of times, MIME did it's job and protected the screen. Unfortunately it chipped and then it started to break really quickly. Don't get me wrong I don't complain about this, it's glass it breaks when dropped on concrete, but it's $25 (+ shipping, I live outside US), and spending this kind of money every month is something I would like to avoid, so I bought some cheep Chinese one on eBay for less than $10. And besides that MIME has nice curved edges, I really don't see the difference...
I had the MIME on my X and while I liked it the sensitivity in the Nav bar area wasn't always good if the phone was say laying on a desk. That being said the MIME on my wifes X is perfect. I just removed my MIME and installed the Mocolo glass screen protector, install was as simple as the MIME and I even had to realign it slightly so peeling it off and putting it back on wasn't a problem. I now have No issues at the Nav bar area so I'm very happy with the Mocolo. http://glass4m.com/products/mocolo-premium-tempered-glass-screen-protector-for-moto-x-g
Just to add, the order to shipped to my door process was 6 days from China to NJ, very impressed.
I-Blason is the best fit out of all the available tempered glass screen protectors.
I-BLASON is the best fit size for moto x. But the glass cover Distance Sensor also.
Maybe have below problem:
Take a call, phone will auto screen off and can not make it on until end of this call.
Power key also can not use while calling.
Any one who have Iblason to check it have this problem or not?
FSRBIKER said:
I had the MIME on my X and while I liked it the sensitivity in the Nav bar area wasn't always good if the phone was say laying on a desk. That being said the MIME on my wifes X is perfect. I just removed my MIME and installed the Mocolo glass screen protector, install was as simple as the MIME and I even had to realign it slightly so peeling it off and putting it back on wasn't a problem. I now have No issues at the Nav bar area so I'm very happy with the Mocolo. http://glass4m.com/products/mocolo-premium-tempered-glass-screen-protector-for-moto-x-g
Just to add, the order to shipped to my door process was 6 days from China to NJ, very impressed.
Click to expand...
Click to collapse
I'm curious what (if any) case you are using.
I'm considering getting one of these, but I'm concerned about the fit inside a hard case. The hard cases are already a VERY tight fit, and I'm wondering if it can even be snapped on with the extra 0.33mm that the Mocolo adds to the thickness.
Can anyone advise?
samwathegreat said:
I'm curious what (if any) case you are using.
I'm considering getting one of these, but I'm concerned about the fit inside a hard case. The hard cases are already a VERY tight fit, and I'm wondering if it can even be snapped on with the extra 0.33mm that the Mocolo adds to the thickness.
Can anyone advise?
Click to expand...
Click to collapse
I have a seidio surface case and an i-blason glass screen protector (ordered from amazon). Long story short the case does not overlap with the tempered glass protector that I got. Although mounting the tempered glass protector is best done with the case already on the device.Top to bottom the case and screen protector is a VERY tight fit (but it does barely fit)!
What confuses me though is people above are saying the i-blason protector covers the proximity sensor, mine doesn't, so I am a bit puzzled...
muiriddin said:
I have a seidio surface case and an i-blason glass screen protector (ordered from amazon). Long story short the case does not overlap with the tempered glass protector that I got. Although mounting the tempered glass protector is best done with the case already on the device.Top to bottom the case and screen protector is a VERY tight fit (but it does barely fit)!
What confuses me though is people above are saying the i-blason protector covers the proximity sensor, mine doesn't, so I am a bit puzzled...
Click to expand...
Click to collapse
From what I understand, it used to, but they fixed it a long time ago.
I have the i-blason, was very careful with installation, used the "hinge" method, went on fine, been over a month with no issues, I use a minimal case, so no issue with it. I still "baby" it, the protector is more so that in case, I'll say "lucky I had a protector on it"
muiriddin said:
What confuses me though is people above are saying the i-blason protector covers the proximity sensor, mine doesn't, so I am a bit puzzled...
Click to expand...
Click to collapse
The difference between version 1 and 2.
I have the mime, and coming from the Zagg glass on my Galaxy S5 which was absolutely amazing, it is just as good. The fit is extremely tight though, you need to be spot on for installation. I have only given it a day though so I'll see if it stands the test of time.
speciala106 said:
I have the mime, and coming from the Zagg glass on my Galaxy S5 which was absolutely amazing, it is just as good. The fit is extremely tight though, you need to be spot on for installation. I have only given it a day though so I'll see if it stands the test of time.
Click to expand...
Click to collapse
Ok so the Ghost Glass only lasted about 2 weeks before it started to chip in the sides from just daily use. Then it shattered when I went to remove it. Customer service responded in less than an hour with a free replacement coupon. So A+ for customer service but the product kindof sucked. Using it was great but as soon as there is one fault the whole thing is junk, something that my Zagg Glass didnt have an issue with. The Zagg cracked but still went on without an issue for 2 months, and even upon removal it stayed in one solid piece.
I will try the replacement for a while and then go to iBlason if there is any issues.
I have the motocolo. The touch screen is good, but the sensivity not realy realy.
Love my iblason, it started getting spiderweb cracks after several months of use, but I was able to transfer the cracked one to my replacement moto x while I work on getting a replacement iblason. No luck emailing them, I have to fill out the warranty form on the site now
Iblason have 2 version? I see many problems with proximity sensor?
Thanks
So any updates on the glass protectors you guys are using?
I've had my MIME for over a year and it's starting to chip and crack after dropping it. I'm not sure if I want to get another one cause I had a lot of difficulty putting it on precisely so as to not have bubble edges.
I have the Mocolo Glass Screen Protector. This Glass fits very nice on the Moto X.
rupro327 said:
I have the Mocolo Glass Screen Protector. This Glass fits very nice on the Moto X.
Click to expand...
Click to collapse
I had motocola but I find the sensitivity of the touch worse so I gave classic screen protector.
I haven't tried all the glass screen protectors, but I bought the monoy and I love it. The best part about it is the edges are curved so your finger just flows over the sides and it feels great.
Hello. I just ordered a OnePlus one, and now I'm looking for the accessories.
I actually have a Note 2 with a tempered glass screen protector. The other day I've met a friend that works on the construction and he died me his Note 2 that he had been using since 6 months ago, and the screen was perfect, without a mark. He sweared that had the phone dropped several times and the screen was, as I said, perfect.
It made me think that maybe the OPO with a Corning Gorilla Glass 3, maybe it doesn't make much sense to use one of these screen protector.
What to you guys think?
Not necessary but if you want the extra protection go for it.
I personally don't use screen protectors but its ultimately up to you.
I don't usually run screen protectors but I'm glad I got one for my OPO.
After a few days of owning it I noticed some super light scratches on the bottom of the screen. This was during the brand new period of owning it and the screen had not touched anything except empty pants pocket, my fingers, and t-shirt for cleaning.
Thankfully my ozrly tempered glass protector showed up the next day, and I've been running that since. Pretty happy with it.
Tl;dr: I'd run a lot of phones naked, but not this one.
Precisely, as this is a cheap phone, and also has gorilla glass,I don't see the necessity as in a Note 3 or an iPhone...
as cheap as it is at $360, a $6 protector won't hurt your wallet
ptolomeo said:
Precisely, as this is a cheap phone, and also has gorilla glass,I don't see the necessity as in a Note 3 or an iPhone...
Click to expand...
Click to collapse
The phone is inexpensive but difficult to repair or replace. I see someone doesn't know the difference between the cost of something and how valuable something is.
I always keep my phone in a dedicated empty pocket but it always gets the random light scratch over its lifetime. A good $15-$25 glass screen keeps it looking new. That way when you pull out your device you don't look like some kind of a hobo.
The Ringke Fusion comes with a screen protector free of charge when you buy the case by the way.
ptolomeo said:
Hello. I just ordered a OnePlus one, and now I'm looking for the accessories.
I actually have a Note 2 with a tempered glass screen protector. The other day I've met a friend that works on the construction and he died me his Note 2 that he had been using since 6 months ago, and the screen was perfect, without a mark. He sweared that had the phone dropped several times and the screen was, as I said, perfect.
It made me think that maybe the OPO with a Corning Gorilla Glass 3, maybe it doesn't make much sense to use one of these screen protector.
What to you guys think?
Click to expand...
Click to collapse
All you need to scratch your screen is a grain of sand.
Are glass protectors mandatory? of corse not, otherwise they would come in the package with the phone. That said, i firmly beleave they are a "must have" for any phone, as you will regret not having one as soon as you get a scratch on it. for my xperia z2 it lasted 1 week 'till i regreted not having one, when for the first time I went "YOLO" on a phone.
You don't need a 30 dollar glass protector, I've had all kinds of brands and prices and all i have to say is that they are all the same, the only thing I insist on is rounded edges, so you don't feel it as much.
I'm on my second OPO, since I sold my first one after it fell face down, slightly tilted up, since it damaged the chrome ring on the top. When it fell, along with the dent, the glass screen protector was shattered on the top left. If you did not realize this so far, the only reason my "amazing gorilla glass" did not shatter aswell is that the protector took the hit for it (shattering to spread the energy). Gorilla glass is made to take scratches, not falls.
Finally, it is up to you. Do i think you do not need a normal plastic screen protector? well, you don't. Do you need a GLASS screen protector? after my experience my opinion can only be yes. I am currently waiting for a new one and have a crappy regular protector on.
Ultimate shield has proven to be a very good, not very expensive, and reliable seller for every phone I got it for (htc one m7, note 3, xperia z2, OPO)
Not absolutely necessary, but you really can scratch the phone screen.
Plastic screen protectors scratch really easy because they are plastic. So even if it protects the screen they end up looking like crap. That's where tempered glass protectors shine, it protects the screen and still looks really nice (albeit at a higher cost).
Tempered glass screen protector is never necessary until...well, until you drop the phone once on a wrong surface...
Take your risk.
I never really believed in tempered glass, until I saw more videos on these types of ion-reinforced glass. They are definitely not indestructible. As somebody above stated, all it takes is a grain of sand for there to be a micro-scratch on the screen. It's from these nearly-invisible weaknesses that the screen will crack when exposed to force when dropped. I believe the reason is that Gorilla Glass 3 is around 6-7 on the Moh's hardness scale, which is harder than metal, which is why keys and knives don't scratch it, but not as hard as sand or rocks.
So in other words, some type of protector will prevent these micro-scratches. The question is then, plastic or tempered glass? I've always used plastic on the last dozen or so phones and tablets I've had, but even the best plastic one (Belkin) still definitely felt plastic in their friction, it wasn't as smooth as glass, and a year later, there are small scratches in it.
Yes, it's true that the OPO is cheap enough that if you smash it, it's not a huge deal, and yes, there was a screen replacement kit I saw in another thread that was $110 or something, BUT it's the time and hassle. For me, slapping on a $15 glass protector (which I found easier to apply than previous plastic protectors), is worth it.
With the OPO, I decided to try a Nilkin tempered glass protector, and it feels as smooth as the original glass, which is great if you're a power user that does alot of quick inputs. It also seems to be very resistant to scratches so far, but I don't believe it's the 9H that they stated in the ad. The downside is that it's definitely noticeably thick, you can see it from the side, and you can feel the edges next to the cutouts.
PS. I'm no expert, so take it as you will.
My screen scrathed its hairline but it did i now have a thin glass screen protector .25mm thick very thin and looks amazing $6 was shipped from china less then week
http://pages.ebay.com/link/?nav=item.view&id=301283644483&alt=web
I own the iphone 5 and it too like all phones are prone to light surface scratches. Better put some protection on it
Hi All,
I have an official Glass Screen protector on my new 1+1 and while it looks great I am finding that the screen is very "tacky" and it's not easy to slide my thumb around on it. I have never had this issue with any other glass screen protector so assuming it's the way it's designed.
I was looking to buy the Orzly to replace it but wondering if that's the same or if it's smoother and more "slippery" and easier to slide your fingers around on it?
Thanks
sheppy1 said:
Hi All,
I have an official Glass Screen protector on my new 1+1 and while it looks great I am finding that the screen is very "tacky" and it's not easy to slide my thumb around on it. I have never had this issue with any other glass screen protector so assuming it's the way it's designed.
I was looking to buy the Orzly to replace it but wondering if that's the same or if it's smoother and more "slippery" and easier to slide your fingers around on it?
Thanks
Click to expand...
Click to collapse
Hey,
I've had a few glass screen protectors and if I'm honest the Orzly one is really good, it feels very smooth and is really resistant towards fingerprints.
Brilliant! Glad you said that as I ordered one a few days ago hehe. Should be here soon so I'll be replacing my official screen protector with it.
got 1 for my phone, never regret about the purchase
darren486 said:
got 1 for my phone, never regret about the purchase
Click to expand...
Click to collapse
I ordered the original one and it took two weeks to arrive
and it wasnt worth the wait. I dnt think the original oneplus one glass screen is that good
The Orzly is my first tempered glass screen protector.
It's a good one, very smooth under fingers (and I'm really picky about it). Only thing, really take care when you apply it, some very very small dust particles can stick onto the silicone before you stick it onto the screen.
You don't notice it at first but after one week, those particles are kinda melted into the silicone and come closer to the glass, then, under some high luminosity condition (first time I noticed it I was in an airport), you can see them.
I thought it was micro scratches but no, the glass is still extremely smooth and it's definitely behind.
Hi there,
got my orzly some months ago, and still satisfied. At work I have three different screen types: the original glass (no protector), my orzly tempered glass, and the mate glass screen protector of colleague 2. IMHO the orzly ist the best choice. The mate glass is better than the original, but you need some time to get a little bit familiar with the material. Everyone of us is satisfied with his choice. If you ask me: thumbs up for orzly!
@Anghirrim: You are absolutely right, I thought I was 100% good at assembly, but some days later I saw flaws under the protector. I have no idea how these dust particle bastards managed it between screen and protector... You are not alone, my friend!
I
@ItsMeDontPanic
For I know.... I applied the screen and found one damn particle. Thus I removed the glass and got the particle off, but during this small particle hunting party, I saw little by little dust sticking onto the silicon.
When applied again the glass, nothing was visible, and it arrived few days after.
I have the ozly and its great smooth and its cheap second one I bought. I bought one with my first one plus, and when I got my second. Order right away
I have ozly, it's expensive but worth it
It's been nearly a year with orzly attached to my opo, still looking good.. i recomend it +1
Sadly the oleophobic coat didn't long last
I've tried Orzly for a while now I'm using NILLKIN glass 9H protector...
It's a bit more expensive but is much better than Orzly above all the oleophobic side...