Two cases arrived at my door today and I quickly opened them. The Ebestsale Transparent Silicone Case is actually a TPU case and not silicone. This case is made of the exact same material as the previous case I reviewed, but has its own differences.
The package came with one screen protector, one piece of cloth and the other case I ordered from this company. After bending this TPU case, I quickly noticed that it is much sturdier than the previous Walsontop TPU case. It is not very easy to deform as drastically as the Walsontop. Putting this on the One gave one of the most satisfactory sounds I look for when fitting anything into something else, the snap. This case clicks on the One and fits very well. It fits so well that you can still feel the sturdiness of the One. There isn't a mushy feel that I get when using rubber cases.
While it provides a great fit, removing it will chalk up the sandstone black's back plate. It's no worry as you can rub it down to erase it, but it may get difficult to remove it without experiencing many of these soft scratches (Baby Skin White users will not experience this).
The slots for all the ports on the side are much larger and more comfortable then the previous Walsontop TPU case. The power button and volume buttons are much more comfortable to press, but not perfect. The rubber around the slots do not move around very easily and quickly return to its original position if it's disturbed. It seems that the company that manufactured this case spent more time cutting the holes for the ports. Each one is cut in irregular asymmetrical shapes whereas the Walsontop's holes were all symmetrical.
The sides are raised and cover more of the bezel which is great when taking damage from certain heights. After doing what I call a "quarter test", where I place a quarter under the screen and move the phone, the quarter remains stationary. It's difficult to see any of the fingerprints on the sides in my case because the blue color hides it well. As far as I know, this blue is the only color Ebestsale sells for this type of case. Overall, this case was a great buy and perhaps the one that will be on my phone if the Nikilin hard case arriving tomorrow doesn't change that. This case is definitely worth more than it costs.
Pics:
[url
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/url]
[IMG]http://goo.gl/yMLbMH[/IMG]
[IMG]http://goo.gl/eezlpA[/IMG]
[IMG]http://goo.gl/QQsnBy[/IMG]
[IMG]http://goo.gl/xrjlfC[/IMG]
[IMG]http://goo.gl/1xD50P[/IMG]
[IMG]http://goo.gl/KWG5cL[/IMG]
[IMG]http://goo.gl/X5O3OM[/IMG]
Pros: Fits very well - Sturdy - Great Port Holes - Overlaps bezels well
Cons: Difficult to remove - Will Scuff Sandstone Back
Link: http://goo.gl/kKNavq
looks decent, ordered mine from aliexpress for like $1.35
I really don't like how easy it is to scuff the sandstone back
Aegyo said:
I really don't like how easy it is to scuff the sandstone back
Click to expand...
Click to collapse
I think that is going to be a major cosmetic issue with our phones. Imagine how the back will look after 12 months of serious use.
Related
Ok so i have tried a bunch of various cases from lots of eBay sellers. I tried the white, hard snap on 2 piece case that's rubberized and had good access to buttons but was a beeyotch to remove and got dirty fast. Couldn't be cleaned either and the rubber coating wore off.
trashed that.
got a clear TPU case from Dealextreme. fit ok, but the cutouts were wrong and blocked the ports. its the same as the S style ones on ebay. they also have knurled grip on the side, but was too hard and uncomfortable to grip for extended time. buttons were HARD to press.
then i got a typical white silicone case (cuz i like white) but that was too mushy and loose fitting like all silicone cases.
Finally i just recieved a glossy black TPU case from eBay seller "exati_technologies" .
this one is almost perfect and the best one by far. it is very thin and fits perfectly. glossy black finish made of TPU plastic/rubber whatever. generously sized openings for button access and charging ports (i hate covered buttons) so your phone may be more succeptable to scratches.
no weird designs on back just shiny blackness. the camera opening has a slightly raised border.
the only thing that could make it better is that it is a finger print magnet of biblical proportions (matte finish may be better), and it doesn't have a kickstand.
basicly same as this one.
http://www.ebay.com/itm/Soft-Glossy...584924?pt=PDA_Accessories&hash=item564825331c
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
photos taken with my iPhone 4...forgive me...
feels like the phone is wearing nothing at all... nothing at all...nothing at all....stupid sexy Flanders.
Nice simpsons reference =). The case looks almost exactly like the Diztronic/Tpu-Cases one but cheaper, which is a good thing! Personally I like my buttons covered so I cant scratch the bezel. It does make the buttons harder to press but you get used to it and lessens the chance of pressing them accidentally.
Funny.. I'm the opposite and like the buttons exposed...
ReDz
Yeah i got this TPU case and have the same problem i had to cut a little so it wouldnt be hard to press... the case was nice but same problem as the others that sale from ebay
I've been looking up different cases and your post was extremely helpful.
I bought the white one for my white Galaxy, and it is totally legit. It's not bulky at all, adds a good grip, and has yet to get dirty.
With my previous device (DX) I stuck primarily to bulky/extremely durable cases for protection, but given the bump in size for the S3, I decided to take a departure and look for cases that were creative yet extremely slim. I decided to go with the Elago G5 Breathe Case.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Pros:
*Reasonably priced (I paid $8.99 shipped with Prime - http://www.amazon.com/gp/product/B008DOBF04/ref=oh_details_o00_s00_i00
*Available in numerous colors - http://elagostore.com/category/74725208961/1/Galaxy-S3-Case.htm
*Mesh backing prevents device from becoming overheated.
*Hardshell casing ensures case will not easily crack, bend, or break.
*Slim fit ensures no bulk and contours perfectly to the shape of the device
*Simple and to some degree Eco-Friendly packaging
Cons:
*Offers minimal protection / top and bottom of device is not protected
*No lip around the circumference of the front of the case, thus offers little to no screen protection if device is placed screen down on flat/rough service.
*Does not include extras (some manufacturers include screen protectors, stands, cloths, etc.)
*Possible to find similar or better protective cases for the same price or cheaper.
Given the sheer size of the S3 and the ability for this case to add little to no noticeable bulk makes me a big fan of this case;more so then I had originally expected I would be. I plan on purchasing an SGP Curved Crystal protector once it is released, to remedy the lack of screen protection because of minimal lip.
Nice write-up, thanks for the review. I had these on my iPhone and was happy to see that they went ahead and designed cases for the GS3.
At the moment I have the solid-back white, as well as a navy breathe case on the way. Already dropped it once, case is scratched up but everything else is solid.
Out of curiosity, are you rooted/ROM'ed? Wondering how you got that lock-screen.
rossomatic said:
Nice write-up, thanks for the review. I had these on my iPhone and was happy to see that they went ahead and designed cases for the GS3.
At the moment I have the solid-back white, as well as a navy breathe case on the way. Already dropped it once, case is scratched up but everything else is solid.
Out of curiosity, are you rooted/ROM'ed? Wondering how you got that lock-screen.
Click to expand...
Click to collapse
i could be wrong but i think that's widgetlocker.
@OP nice write up.
itzike said:
i could be wrong but i think that's widgetlocker.
@OP nice write up.
Click to expand...
Click to collapse
Bingo
I did forget to mention that while the finish is glossy, the holes do in fact assist with gripping the device.
This looks like a great case, but too bad there isn't enough of a lip around the front of the phone to set it face-down and not worry about scratches. Other slim cases like Rock have a lip. Does anyone know if the other Elago G5 Slim Fit cases have a lip on the front?
jprow507 said:
This looks like a great case, but too bad there isn't enough of a lip around the front of the phone to set it face-down and not worry about scratches. Other slim cases like Rock have a lip. Does anyone know if the other Elago G5 Slim Fit cases have a lip on the front?
Click to expand...
Click to collapse
Which Rock case has a lip? The one below doesnt, its similar to the Elago G5 case.
I am looking for a slim case that protects the top,bottom and sides, plus has a lip around the screen. Has anyone see one with these specs?
http://www.casesss.com/product.aspx?model=97&pid=429
There is another elago g5 case which cover the whole phone but unfortunately I can't recommend it :
http://forum.xda-developers.com/showthread.php?t=1949838
The price of Otterbox brand cases was always a huge turnoff as was the size. I didn't want my slim One having additional bulk---at least any more than was necessary. Enter Commuter series.
The case is comprised if two pieces; soft rubber interior case and hard plastic exterior that protects the back, sides, and the bottom/top of the phone. The inner case has soft plastic nubs that cover both the charging port and headphone jack. IR blaster is exposed as are the bottom Mic, rear Mic and camera. Volume manipulation is easier with this case as the soft plastic raises the button height. Feels decidedly sturdy and premium. Fits well but does take some time to get the outer case to snug up to the inner case. Comes with screen protector though I haven't and will not install it.
In hand the case feels sturdy without the additional bulk associated with Otter Box cases. Grip is much improved over going caseless, and as stated earlier it's much easier to manipulate the volume.
Protection wise it seems to offer what you would think an Otterbox would offer. Corner impacts are absorbed by the soft plastic interior case, and the screen won't touch the surface you lay it on because the screen is recessed a few milimeters due to the case design. It's also nice that both ports have covers installed to keep debris from entering them. Only gripe on that point is one handed operation to plug in the usb cord and headphone jack is tricky but doable.
The good thing about this case aside form the protection is the fairly slim profile and the ease of going in and out of your pocket. Both pieces of the case are hard and slick enough to not snag up going in and out of your jean pockets.
The only real complaint that I have is how hot the phone seems to get during gaming. Though it's a phone issue and admittadly the plastic never feels as hot as the phone felt caseless.
If you are looking for a case that offers great protection while still maintaining a slim profile; this case is ideal. A little pricey, though (35 USD @ Sprint Store)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my HTCONE using Tapatalk
I've had this case since the second week of having my one. I initially had bought the incipio dualpro shine, but it made my signal go in the toilet, even though the package said it wouldn't affect it... Signal issues aside, the commuter is a much better case. The port covers and shape of the IR blaster cutout are the winning features.
5 Stars Case!
I had this case after 3 weeks Using my one..Its been almost 8months now and my One fell down so many times. And still working great..Protection is great and the look is great.I have nothing to complain about this case..
Love the commuter case on any phone that I had it on but when I got my One I thought it made the phone feel a little wider than usual so I ended up going with another case but my fiance got it cause she has the case of the drops and it has taken a beating and keeps on ticking.
Sent from my HTC6500LVW using Tapatalk
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Oneplus ONE Original Flip Cover
First Class Bicast Leather and Smooth Velvet
The exterior consists of a shock absorbent plastic layered with resistant Bicast leather, while the interior is made of soft velvet for the backside of the One to have a comfortable place to rest on. The front side will flip up effortlessly, and will fall back carefully on your One with a discrete “tap”. The attention to detail is once again manifested through the OnePlus logo carved on the bottom-right side of the front.
Automatic Unlock and Other Features
Your One will automatically unlock* as soon as you flip open the front side, for a smoother and better user experience. The volume button will be reached as easily through the flip cover as without. The same goes for the lock button. As the backside has an opening for the camera and the flash, and the front side will leave the loudspeakers unblocked, you can take beautiful images and talk to your friends while not worrying about your One.
*Requires CyanogenMod 11 version XNPH22R or higher
Additional Information
Dimensions 176.3 × 88 × 22 mm
Weight 157g
The OnePlus flip cover is specifically designed for the One, so you can rest assured that your One will be perfectly shielded against everything that a phone can be subjected to – at least almost.
Source Oneplus.net
I am quite satisfied with this flip cover. Very good workmanship, fit perfectly into the OPO and very stylish
It is available in various colors to suit every taste
Nice review!
One question: does this flip cover affect two hand use in any way?
LucaFraga said:
Nice review!
One question: does this flip cover affect two hand use in any way?
Click to expand...
Click to collapse
No
I found the flip cover very uncomfortable to use, especially the corners. Shouldve used softer material.
Returned it.
Miz_Buzzer said:
I found the flip cover very uncomfortable to use, especially the corners. Shouldve used softer material.
Returned it.
Click to expand...
Click to collapse
I think if they used softer materials would degrade faster...
I really like the flip case for my OPO and it's the case I use every day.
My only complaint is that the magnet seems to be too strong and will sometimes turn off the screen when the cases is fully opened. I tried lining the inside of the back of the case with duct tape to add a tiny bit of a gap between the phone and the case and it seemed to help a little bit but it still happens.
scott47 said:
I really like the flip case for my OPO and it's the case I use every day.
My only complaint is that the magnet seems to be too strong and will sometimes turn off the screen when the cases is fully opened. I tried lining the inside of the back of the case with duct tape to add a tiny bit of a gap between the phone and the case and it seemed to help a little bit but it still happens.
Click to expand...
Click to collapse
It never happened to me
The screen only turn of when I fully close the case
I am very impressed by the apparent ruggedness and protection that this case has to offer at this price point. There is a generous lip around the entire screen that should give your phone's screen a pretty good chance of surviving a face down fall onto most surfaces unless into gravel or something like that.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The case feels pretty comfortable in the hand. The texture along the side edges allows for a good grip so the case is definitely not slippery. This outer edge is a soft rubber material while the rest of the case is a hard plastic. So, the soft outer edge should provide some fair cushioning for drops.
It is not what one would describe as "slim" but that's not really the category this type of case is usually aiming for. It feels appropriately sized for the protection it offers
As far as design goes, overall I like it very much. I'm not exactly sold on the plastic "hex nuts" on the back. They seem a bit tacky and are not flush with the case so they add a bit of discomfort when your hand slides across them while holding the phone. So, while not being aesthetically pleasing or comfortable, they are not a welcome feature in my opinion. Plus, they seem susceptible to dust/dirt collection.
I'm not personally a fan of the dust covers over the charging port and headphone jack but this is a common feature on heavy-duty cases and as such I don't view it as a fault - they seem well designed and fitted.
This is a 2-part case, there's a plastic frame that goes over the phone first, then the assembly is fitted into the outer case. It is a bit difficult to get the phone in and out of the case. The inner frame doesn't have any cushioning between the phone and the frame so I am a bit concerned over getting scratches. The buttons are plenty responsive and easy to push.
I am very happy that this case has a kickstand - it's pretty much a requirement these days for any case I use as a daily driver. The kickstand feels nice and sturdy and it's cool that it can support the phone in landscape and portrait. I do wish the kickstand were a bit easier to close but at the same time you wouldn't want it to close too easily. I like that you can see through to the back of the phone when the kickstand is in use. It also acts as a pretty great handle while holding the phone in portrait mode, kind of like a pop-socket or a ring; you can put your finger between the kickstand and the kickstand frame.
I will definitely be keeping an eye on this brand from now on. I really love the color selection that they offer. I hope they come out with some clear case options...with a kickstand!
Link : <Mod Removed>
Use coupon: AMDTEK20 for extra 20% off
Win a free case here <Mod Removed>
I love these type of cases, i've got a youmaker case...
Looks like UAG case with extra front layer
Links removed, thread closed