Hello. An unboxing and hands on video of the IMAK Crystal clear case for the OnePlus One. For additional OnePlus and technology videos, please check out my YouTube channel. Enjoy!
EDIT - The embedded video isn't working. I've reported it. Meanwhile the direct link for the video can be found HERE.
Additional OnePlus One videos from my channel:
[Video] OnePlus One Unboxing and hands-on
[Video] OnePlus One quick thoughts
[Video] OnePlus One Clear Case unboxing and hands-on
[Video] OnePlus One FlipCover unboxing and hands-on
[Video] DayJoy Aluminium bumper for the OnePlus One
KSmithInNY said:
Hello. An unboxing and hands on video of the IMAK Crystal clear case for the OnePlus One. For additional OnePlus and technology videos, please check out my YouTube channel. Enjoy!
EDIT - The embedded video isn't working. I've reported it. Meanwhile the direct link for the video can be found HERE.
Additional OnePlus One videos from my channel:
[Video] OnePlus One Unboxing and hands-on
[Video] OnePlus One quick thoughts
[Video] OnePlus One Clear Case unboxing and hands-on
[Video] OnePlus One FlipCover unboxing and hands-on
[Video] DayJoy Aluminium bumper for the OnePlus One
Click to expand...
Click to collapse
The link works for me.
vanessaem said:
The link works for me.
Click to expand...
Click to collapse
Very strange. Working for me as well now. Previously the embedded video was just a black box, it wasn't actually displaying the video. Thanks for looking into it :good:
The case is flawless when you get it, absolutely crystal clear, fitting the phone perfectly without hindering pressing the side buttons. However, about 2 weeks later, there are so many scratches and scuffs on the back that I don't think I could use this case for even a month.
Severose said:
The case is flawless when you get it, absolutely crystal clear, fitting the phone perfectly without hindering pressing the side buttons. However, about 2 weeks later, there are so many scratches and scuffs on the back that I don't think I could use this case for even a month.
Click to expand...
Click to collapse
This (supposedly at least) is the IMAK II
I asked the seller what the difference is between the IMAK and the IMAK II since the IMAK II costs about 100% more and this is the reply I got: "The IMAK Crystal can be scratched easily, but IMAK Crystal II not."
bonfilet said:
This (supposedly at least) is the IMAK II
I asked the seller what the difference is between the IMAK and the IMAK II since the IMAK II costs about 100% more and this is the reply I got: "The IMAK Crystal can be scratched easily, but IMAK Crystal II not."
Click to expand...
Click to collapse
I guess for mega cheapskates that's cool that they make 2 models of differing cost, but it doesn't really make sense at their price point not to just merge them and have the scratch problem fixed. It was a temporary case for me anyway, will be getting a Diztronic for it next week. The Diztronic added with my Orzly tempered glass screen protector should make for pretty decent protection that doesn't add much bulk.
nice!its soft gel plastic or hard?
blade_ said:
nice!its soft gel plastic or hard?
Click to expand...
Click to collapse
It looks like something inbetween see this pic
bonfilet said:
It looks like something inbetween see this pic
Click to expand...
Click to collapse
seems good to me
Have One and It's Soooo Good ? I Highly Recommend it Extra Grip and Looks Very Nice.
Sent from my One using XDA Free mobile app
xavie6 said:
Have One and It's Soooo Good ? I Highly Recommend it Extra Grip and Looks Very Nice.
Sent from my One using XDA Free mobile app
Click to expand...
Click to collapse
Can you post some pictures please? And di you get the 1st or second generation of IMAK?
I looks to be more of a hard plastic than soft. Can you guys confirm?
Related
I got both of them, haven't seen anyone else do a comparison video, so here's the link:
http://www.youtube.com/watch?v=U0I_-HTjxQ0
I apologize ahead of time for the um's...public speaking isn't my thing.
Here is an album of the Spigen Ultra Hybrid case: http://imgur.com/a/CM5zW
Here is an album of the Rearth Ringke Fusion case: http://imgur.com/a/AR8vh
Feel free to ask any questions, I'll be happy to answer them.
tmhiott said:
I got both of them, haven't seen anyone else do a comparison video, so here's the link:
http://www.youtube.com/watch?v=U0I_-HTjxQ0
I apologize ahead of time for the um's...public speaking isn't my thing.
Here is an album of the Spigen Ultra Hybrid case: http://imgur.com/a/CM5zW
Here is an album of the Rearth Ringke Fusion case: http://imgur.com/a/AR8vh
Feel free to ask any questions, I'll be happy to answer them.
Click to expand...
Click to collapse
I was watching this earlier when I did a YouTube search. When I saw the design for the Fusion and Ultra Hybrid, I was immediately attracted to the Ultra Hybrid. The Fusion looks a bit too round for me, which is a shame since I loved the Fusion case for the Nexus 4.
great review, thanks
edit: i think your spigen case might be ok, you might just have to peel off the plastic in the front and back just like the ringke.
Good review
Sent from my Nexus 5 using xda app-developers app
Thanks for the review seems like Spigen was the right choice.
waxlabo said:
great review, thanks
edit: i think your spigen case might be ok, you might just have to peel off the plastic in the front and back just like the ringke.
Click to expand...
Click to collapse
I was also going to ask this, did you actually remove the plastic films on the Spigen one? because it doesn't have a message like the Ringke to remove it but they're there and I'm almost certain you didn't remove them because when you were comparing them it looked hazy.
Does the Ringke come with an option for a solid black back instead of clear?
bmstrong said:
Does the Ringke come with an option for a solid black back instead of clear?
Click to expand...
Click to collapse
Nope. That would be the Slim series but thats another case.
Damn I thought the Ultra hybrid would be about the same size as the Fusion... I like smaller cause my hands are not large. Unfortunately I order an ultra hybrid if I would have seen this before that I would have bought the Fusion! Anyone want to buy my Ultra hybrid?? lol it hasnt come in yet but idk I may need to sell it and buy the fusion instead..lol
daLareid said:
Thanks for the review seems like Spigen was the right choice.
I was also going to ask this, did you actually remove the plastic films on the Spigen one? because it doesn't have a message like the Ringke to remove it but they're there and I'm almost certain you didn't remove them because when you were comparing them it looked hazy.
Click to expand...
Click to collapse
He posted on the Reddit thread that he did in fact forget to peel off the front screen protector on the case. Afterwards, the scratches were gone.
Xodus22 said:
He posted on the Reddit thread that he did in fact forget to peel off the front screen protector on the case. Afterwards, the scratches were gone.
Click to expand...
Click to collapse
That's what I thought, thanks for the update.
I thought mine was scratched too, but you need to peal both the front and back protectors off.
I have both as well. The Spigen is higher quality, but the Rearth is slightly smaller and much more comfortable to hold due to the rounded edges. Also the buttons are easier to press on the Rearth.
So far I have all the Spigen cases and the Rearth and I really don't like any of them. I have a Supcase and a Diztronic on their way. Having a PITA time finding a decent case for this thing. I know I'll like the Diztronic, but I am really, really hoping UAG comes out with a case for us (they likely won't).
_MetalHead_ said:
I have both as well. The Spigen is higher quality, but the Rearth is slightly smaller and much more comfortable to hold due to the rounded edges. Also the buttons are easier to press on the Rearth.
So far I have all the Spigen cases and the Rearth and I really don't like any of them. I have a Supcase and a Diztronic on their way. Having a PITA time finding a decent case for this thing. I know I'll like the Diztronic, but I am really, really hoping UAG comes out with a case for us (they likely won't).
Click to expand...
Click to collapse
I'm with you. So far I tried the neo hybrid and the ultra thin, and they are not floating my boat. I also have the supcase and diztronic coming(diztronic arriving today), and will report back once I get the two and compare them.
Sent from my Nexus 5 using xda app-developers app
ethantarheels123 said:
I'm with you. So far I tried the neo hybrid and the ultra thin, and they are not floating my boat. I also have the supcase and diztronic coming(diztronic arriving today), and will report back once I get the two and compare them.
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
Yeah my Diztronic is being delivered today too. The Diztronic is pretty much a sure bet but it's TPU, so it is what it is. It'll do until I find a better case.
It's like you went back to 1985 and flimed that video. Thanks for the video, very informative!
ethantarheels123 said:
I'm with you. So far I tried the neo hybrid and the ultra thin, and they are not floating my boat. I also have the supcase and diztronic coming(diztronic arriving today), and will report back once I get the two and compare them.
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
THANK YOU I am waiting for what you say because I too dont like the ULTRA
_MetalHead_ said:
Yeah my Diztronic is being delivered today too. The Diztronic is pretty much a sure bet but it's TPU, so it is what it is. It'll do until I find a better case.
Click to expand...
Click to collapse
Diztronic is one of those tried and true cases. If only they made a version where the front lip isn't glossy
Sent from my Nexus 5 using xda app-developers app
ethantarheels123 said:
Diztronic is one of those tried and true cases. If only they made a version where the front lip isn't glossy
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
Yep, agreed completely.
Sent from my Nexus 5 using XDA Premium 4 mobile app
just got my diztronic. give me a few minutes to gather some thoughts about it.
Edit: Alright. First off, it looks very nice and sleek, and it definitely does not add as much size as the neo hybrid did (that thing literally gave the N5 the height and width of a Note 3). Fit and finish is OK, not quite as good as sgp or even the older Diztronic cases I remember having on my ATT One X. There is a little bit of flash at the bottom edge under the charging port, so if you usually rest your pinky near the charging port, you will feel a little bit of sharpness. Other than that, the case is pretty formfitting. The buttons actually have a nice click feedback, and it doesn't feel like the case is constantly putting pressure on the buttons when they are not pressed, which is VERY good thing and something I cannot say for most cases. Overall, a solid case, and definitely knocked the neo hybrid away. Waiting for the Supcase for further comparison and judgement.
so it seems that the diztronic wins over spigen and spigen wins over ringke fusion....hmm..
i wonder why no one here mentioned the slim armor from spigen...with all the differences of opinion and no seemingly "excellent" case out there (and with slim armor my preferred one ahving button problems) i dont know what to do ! please do post your reviews people specially if you have multiple cases and which one you like best
Hey everyone-
Hope you all have been enjoying the videos. I'm really proud of this most recent video and if you have fun watching it or gain some knowledge from it then please give the video a thumbs up and consider sharing the video with your friends and family via social media.
For additional OnePlus and technology videos, check out my YouTube channel. Enjoy!
Additional OnePlus One videos from my channel:
[Video] OnePlus One Unboxing and hands-on
[Video] OnePlus One quick thoughts
[Video] OnePlus One Clear Case unboxing and hands-on
[Video] OnePlus One FlipCover unboxing and hands-on
[Video] DayJoy Aluminium bumper for the OnePlus One
[Video] IMAK Crystal clear case for the OnePlus One.
[Video] Cruzerlite TPU case for the OnePlus One
[Video] OnePlus One extended review.
[Video] Tudia lite case for the OnePlus One.
Already bought one before your thread and really liking it.
Ian B
1st) Your singing sucks.....
2nd) Thx for the turn on, to Charles Bradley....
3rd) SB517 ordered......All us crappy singers need a place to jam....
:good:
rcdd said:
1st) Your singing sucks.....
2nd) Thx for the turn on, to Charles Bradley....
3rd) SB517 ordered......All us crappy singers need a place to jam....
:good:
Click to expand...
Click to collapse
I firmly believe that when nobody is around, my shower singing is potentially some of the best in the world. It was the stupid camera that messed me up I'm sticking to that story!
Official Smoke Case
by OnePlus
Official Flip Case
by OnePlus
Official Clear Case
by OnePlus
InvisiCase
by Orzly
ExecArmour
by Orzly
Wallet Case
by Orzly
FlexiCase
by Orzly
FlexiSlim
by Orzly
FlexiCase Blue
by Orzly
Fusion Bumper
by Orzly
Lucion
by Tudia
Arch
by Tudia
I picked up the Ringke Fusion Clear case off Amazon. I am very disappointed by the whole thing. It does not fit the 1+2 in almost every detail. The case does not extend beyond the screen so if placed face down the screen will touch table or counters surface. I tried to show pictures off the main misalignments.
ghettopops said:
I picked up the Ringke Fusion Clear case off Amazon. I am very disappointed by the whole thing. It does not fit the 1+2 in almost every detail. The case does not extend beyond the screen so if placed face down the screen will touch table or counters surface. I tried to show pictures off the main misalignments.
Click to expand...
Click to collapse
Jeez, that's pretty bad. I had always thought Rinke was on point with its precision and stuff, thanks for posting!
Waterdroid said:
Jeez, that's pretty bad. I had always thought Rinke was on point with its precision and stuff, thanks for posting!
Click to expand...
Click to collapse
I sent them an email with the same photo's, they are refunding my money. Pretty stand up.
Now I need to find a bumper.
Here you go!
I ordered orzly fusion bumper case, its on the way.
Sent from my ONE A2003 using Tapatalk
ghettopops said:
I picked up the Ringke Fusion Clear case off Amazon. I am very disappointed by the whole thing. It does not fit the 1+2 in almost every detail. The case does not extend beyond the screen so if placed face down the screen will touch table or counters surface. I tried to show pictures off the main misalignments.
Click to expand...
Click to collapse
Thats a shame! I just got in the Orzly fusions and they fit way better than that
Space saver
Waterdroid said:
Jeez, that's pretty bad. I had always thought Rinke was on point with its precision and stuff, thanks for posting!
Click to expand...
Click to collapse
DustinDep said:
Thats a shame! I just got in the Orzly fusions and they fit way better than that
Click to expand...
Click to collapse
Last I looked didn't that case take like 3+ weeks for delivery?
I just got my OP2 and my accessories at the same time now! I have the Dual Layer Defender Protective Case Cover with Kickstand and damn it's bulky and hard to hold in my hand. I had a MI3 and OPO naked before (broke both phones and now I've learned my lesson) but I've been stuck with a 5C for a week. Hopefully I get used to the size and heft again of a 5.5", though this is the heaviest phone of all...
http://www.amazon.com/gp/product/B00YM3WQ12?psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00'
I get One Plus's translucent gray case tomorrow.
https://oneplus.net/oneplus-2-translucent-gray-case
Mersine said:
I just got my OP2 and my accessories at the same time now! I have the Dual Layer Defender Protective Case Cover with Kickstand and damn it's bulky and hard to hold in my hand. I had a MI3 and OPO naked before (broke both phones and now I've learned my lesson) but I've been stuck with a 5C for a week. Hopefully I get used to the size and heft again of a 5.5", though this is the heaviest phone of all...
http://www.amazon.com/gp/product/B00YM3WQ12?psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00'
I get One Plus's translucent gray case tomorrow.
https://oneplus.net/oneplus-2-translucent-gray-case
Click to expand...
Click to collapse
Why don't you look at tudia or better otterbox
Sent from my SM-G900H using XDA Free mobile app
I returned the Dual Layer Defender Protective Case Cover with Kickstand because it's too bulky and really like the One Plus's translucent gray case
Mersine said:
I get One Plus's translucent gray case tomorrow.
https://oneplus.net/oneplus-2-translucent-gray-case
Click to expand...
Click to collapse
Many reviews of the gray case put it over stylecover but webstie says "Please note that to use this case you will need to remove the device's StyleSwap Cover as it is designed to snugly contour the OnePlus 2 without adding extra bulk." could you put picture with this case as recommended by one plus ? I am interested in i=this one
cedric1918 said:
Many reviews of the gray case put it over stylecover but webstie says "Please note that to use this case you will need to remove the device's StyleSwap Cover as it is designed to snugly contour the OnePlus 2 without adding extra bulk." could you put picture with this case as recommended by one plus ? I am interested in i=this one
Click to expand...
Click to collapse
I've attached pictures of my phone and the case with my stock back cover and without (you can see my serial). It is very weird without. I can definitely feel the back as hollow and missing something. I'd advise to keep it on, it is as slim as can be. That's odd the website would say that if it fits without the back cover on.
I bought the Diztronic tpu case because I had it for the OnePlus and was very satisfied. Although it is roughly the same case as for the opo the finishing is not as good. There is a shiny edge where the camera is, which could have worked out great but just is not. The case is also not as tight as for the opo and corners will slip off the phone when getting it out of your pocket. On the other hand the case is still from a very durable shock absorbing material and the edge that stands out over the screen makes sure that the glass doesn't shatter when you drop it. The thing I like about it most is the fact that it simply makes the OnePlus look more humble. No thrills just a nice phone. All and all a good case but not as good as its predecessor.
im not happy with this at all..i have the black apricot..it is quite a bit thicker than the sandstone..im very disappointed in oneplus to sell styleswaps with different thicknesses..
I have both the orzly invisicase and fusion bumper..
with the invisicase..it loses the facedown protection..the screen comes out on top of the edges..because its too tight..the corners/edges will slipp off with a small touch..
with the fusion bumper..you clearly see it doesnt fit the contours of the device..especially at the cutouts and the top&bottom..
also the cutout for the usb port is too small for the standard oneplus cable (have to use some force) ..while its cut perfectly for the usb cables orzly is selling..
basically..these cases are only designed to use with the standard sandstone styleswap while intended for the other styleswaps..
Has anyone got the spigen rugged case?
rosswaa said:
Has anyone got the spigen rugged case?
Click to expand...
Click to collapse
I also want to know this...
Sent from my ONE A2005 using XDA Free mobile app
Talesofanobody said:
I also want to know this...
Sent from my ONE A2005 using XDA Free mobile app
Click to expand...
Click to collapse
I've just ordered it, so if no one else does I'll get a mini review type thing when it arrives sorted
rosswaa said:
I've just ordered it, so if no one else does I'll get a mini review type thing when it arrives sorted
Click to expand...
Click to collapse
Alright, thanks
Sent from my ONEPLUS A2005
Post your Galaxy S10+ Plus cases here.
First two cases in today. UAG blacked out Monarch and the slate Pathfinder.
I also have the Gear 4 Battersea and Otterbox Symmetry case on order. I'll post some pics when they arrive.
felloffthetruck said:
First two cases in today. UAG blacked out Monarch and the slate Pathfinder.
Click to expand...
Click to collapse
I would love to hear your experience with the UAG cases when your phone arrives (I assume it hasn't yet, since you only shared the cases by themselves). Especially about how the front lips cover the tapered-off edges (am I still able to put the phone face-down and not have the screen touch the surface?) and how thicker the cases make the phone. Some extra photos with the phone inside would be great as well. Thank you for sharing!
oskay.demir said:
I would love to hear your experience with the UAG cases when your phone arrives (I assume it hasn't yet, since you only shared the cases by themselves). Especially about how the front lips cover the tapered-off edges (am I still able to put the phone face-down and not have the screen touch the surface?) and how thicker the cases make the phone. Some extra photos with the phone inside would be great as well. Thank you for sharing!
Click to expand...
Click to collapse
I will add some detailed pictures to this thread if my phone ever shows up. Ordered the 1TB in ceramic black and I have a deliver by date of 3/12
I'm getting this case, I have one for my 6T and it's really good, especially the price, surprise not a lot of people mention these cases, theyre out for a lot of other phone as well.
MrPhilo said:
I'm getting this case, I have one for my 6T and it's really good, especially the price, surprise not a lot of people mention these cases, theyre out for a lot of other phone as well.
Click to expand...
Click to collapse
What case is this?
pchain said:
What case is this?
Click to expand...
Click to collapse
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/173815950214
MrPhilo said:
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/173815950214
Click to expand...
Click to collapse
Can you tell me the name of the case and manufacturer, please.
Sending me a response in less than a minute after I posted with only a link smells rather phishy.
Thank you.
pchain said:
Can you tell me the name of the case and manufacturer, please.
Sending me a response in less than a minute after I posted with only a link smells rather phishy.
Thank you.
Click to expand...
Click to collapse
Just search S10 Fabric Case on eBay there is no brand
My go to cases for every smartphone i have owned are from Ringke. I have the fusion clear case and the onyx case waiting for the phone to arrive. If incipio releases their NGP advanced case for the S10 plus, i will be all over it. Love the grip on that case.
Any other simple case, which has grip and is not big and bulky like the speck cases?
Ati75 said:
My go to cases for every smartphone i have owned are from Ringke. I have the fusion clear case and the onyx case waiting for the phone to arrive. If incipio releases their NGP advanced case for the S10 plus, i will be all over it. Love the grip on that case.
Any other simple case, which has grip and is not big and bulky like the speck cases?
Click to expand...
Click to collapse
I've just received
Spigen Silicone Fit with Soft Gel Enhanced Grip and Slim Profile Designed for Galaxy S10 Plus Case S10+ Cover (2019) - Black
https://www.amazon.co.uk/dp/B07MJRV3KX/ref=cm_sw_r_cp_apa_i_H7uFCb89V8NKJ
Feels amazing and has a good balance of protection and slim feeling, Just need the phone now!
I'm interested to hear what the other ceramic folks are going to use. I'm guessing a clear case would be the best to show off the premium material/color, but if anyone has other ideas, I'd like to hear about 'em.
Here's my stash
This is my phone case. I'm using this case for 3 days and very happy with it.
http://www.casemecase.com/product/caseme-samsung-galaxy-s10-plus-wallet-case/
Best case Ive had on my current S8 Has been Gear4 , but there are non released yet for the S10+
WARKRIME said:
Best case Ive had on my current S8 Has been Gear4 , but there are non released yet for the S10+
Click to expand...
Click to collapse
They are out. I just ordered the Battersea.
felloffthetruck said:
They are out. I just ordered the Battersea.
Click to expand...
Click to collapse
I can only find the battersea on the 10 not the +?
Got a link mi amigo?
WARKRIME said:
I can only find the battersea on the 10 not the +?
Got a link mi amigo?
Click to expand...
Click to collapse
Here you go.
https://www.gear4.com/us/battersea-galaxy-s10-plus/
Otterbox Defender for mine. Can't wait to get my s10+ tomorrow!
I noticed some Oneplus 7 Pro cases show up in my daily Oneplus 7 pro search. Please post links for cases as they come out.
Ringke FUSION X (has decent pictures of the Oneplus 7 Pro)
http://www.ringke.com/site/item.php?id=46&item=683
Tudia HEAVY DUTY DUAL LAYER MERGE CASE
https://tudiaproducts.com/products/heavy-duty-dual-layer-case-for-oneplus-7-pro
KuGi Soft TPU
https://www.amazon.com/dp/B07QQ1V4VG/ref=cm_sw_em_r_mt_dp_U_8P12CbCPPC92G
Osophter Dual Layer Cases Hard
https://www.amazon.com/dp/B07Q1NFX8L/ref=cm_sw_em_r_mt_dp_U_4S12Cb6FBFTMZ
Amazon UK :
Spigen Rugged Armor (an old favourite for some people) : https://www.amazon.co.uk/Spigen-Compatible-OnePlus-Original-Flexible/dp/B07QQ9LSK4
£9.99 (with Amazon Prime)
Ringke Fusion-X : https://www.amazon.co.uk/Ringke-Transparent-Protection-Absorption-Technology/dp/B07Q6GZXZK
£8.99 (with Amazon Prime)
(No affiliate links )
Probably gonna get a clear tpu to go with that blue....
@OneStepAhead any plans for diztronic to get in on the 7pro?
dadoc04 said:
Probably gonna get a clear tpu to go with that blue....
Click to expand...
Click to collapse
I have been binging on Oneplus 7 Pro review videos and the phone seems to come with a clear TPU case in the box. Not sure if that is for all variants though. I was going to order a clear case off Amazon, but I'll wait until I see if it comes with one.
mtucker said:
I have been binging on Oneplus 7 Pro review videos and the phone seems to come with a clear TPU case in the box. Not sure if that is for all variants though. I was going to order a clear case off Amazon, but I'll wait until I see if it comes with one.
Click to expand...
Click to collapse
Stock case is really thin.... So i usually go with 1 of the big names for a case
I wish UAG makes a case for this phone.
borijess said:
I wish UAG makes a case for this phone.
Click to expand...
Click to collapse
But they Must lower the price.
I went through Amazon today to find a screen protector and a case, some of them already have reviews that are 10 days old, those paid reviews don't make the choice easier...
It will be interesting to see which ones work well with a good screen protector
mcwarre said:
It will be interesting to see which ones work well with a good screen protector
Click to expand...
Click to collapse
I like thin cases so I ordered a Nillkin https://www.amazon.com/dp/B07RSGPBRT/ref=twister_B07DCQVJX4?_encoding=UTF8&psc=1
I had one on my McLaren for months. Took a few drops, works well, minimum bulk and weight.
VennligFiende said:
I like thin cases so I ordered a Nillkin https://www.amazon.com/dp/B07RSGPBRT/ref=twister_B07DCQVJX4?_encoding=UTF8&psc=1
I had one on my McLaren for months. Took a few drops, works well, minimum bulk and weight.
Click to expand...
Click to collapse
Just wished it had a magnetic back like the Nillkin I'm using for the 6T.
Still waiting for the phone but I have already ordered:
https://www.aliexpress.com/item/For-Oneplus-7-Pro-Case-Oneplus7-Pro-Cover-Finger-Ring-Holder-Soft-Silicone-Shockproof-Back-Cover/33008606427.html?spm=a2g0s.9042311.0.0.2bbf4c4dDeHpny
Official One Plus Silicone Case (Red) for 7 pro
Any word regarding the Red Silicone Case for the 7 pro? Loved it on my 6T!
dbrand grip <3 comes in 1 month
https://dbrand.com/shop/grip/oneplus-7-pro-cases
I may try that DBrand Grip case when it comes out. I heard good things about that case.
Really thinking about upgrading from my 1+5... You guys would trust in a bumper (only edge covering) to protect this phone? what do you think about that kind of "cases"?
I'm looking on Amazon but it seems that most the ones at the top are full of fake reviews. Some of them have 5+ reviews and none are even verified purchases...
I may just check out a couple of the 10 dollar ones and see how well they work.
https://www.amazon.com/gp/product/B07Q519FB2/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
I got that one and worse case returning it is easy if there are issues
Osophter Dual Layer Cases Hard
https://www.amazon.com/dp/B07Q1NFX8L..._4S12Cb6FBFTMZ
I ordered in dark cyan.
I like the Ringke but it won't arrive when I get the phone.
My phones always have a case.
I like the Karbon case from Oneplus, I just didn't want to fork over close to $40 for a case.
I went with this one:
https://www.amazon.com/gp/product/B07Q4MKCN2
No idea how good it is, but I'll update once I get it.