HTC one x screen replacement - HTC One X

Hi folks,
So now it happened, after I dropped my phone ten thousand times: the screen broke big time. I now also have two yellowish spots on the display. Touch is still working.
My questions:
1. What exactly do I have to replace?
2. There are kits available on amazon for approximately 60 euros, will they work?
3. Can I do it myself?
4. Any word on quality of the replacement parts?
Btw. I live in Germany.
Thanks in advance!
Sent from my HTC One X using XDA Free mobile app

Anyone, please?
Sent from my HTC One X using XDA Free mobile app

I replaced my screen last week, I bought an cheap screen from ebay, it was like €25,-
The screen is a bit yellowish all over, but with some app I added a bit of blue and it was pretty good.
My touch isn't fully working, on a small spot it isn't working but maybe I get a new screen because it's not good.
I guess you can better buy a OEM...
Also my screen doesn't fit well, but that can be my fault
It's not that hard to replace it, there a few guides on the web that helps a lot.
Oh, and you have to replace your whole screen
Hope this will help you a bit

Related

Problem with my Wildfire display [help please]

I have dropped my Wildfire on the floor and after i picked it up i had a spot on the screen(you can see it in the pics attached).I want to order the parts necesary from ebay because i saw they have good prices.
Please help me because i need to know..what part do i have to change to get that spot away from the screen?(the digitizer,the display?)
Thanks!
PS: the touchsreen works perfectly
really no one knows?
asking again..please help
I had exactly the same problem. That mark you see on the screen is due to dead pixels. I dropped mine too and I had a spot just like yours. Here is how I solved the problem.
1. Go to ebay and buy an LCD screen for wildfire. I got mine for less than $50. You just need the LCD not the touchscreen digitizer. I think you can get it cheaper.
2 Replace the LCD. I could not find a dissassembly guide for wildfire, but you can follow the Desire guide. They are pretty much the same. I am talking about the steps. Obviously, they different phones.
Since your touchscreen works, it is easier to replace the LCD.
Now my wildfire works fine with a working LCD.
Good luck
Sent from my HTC Wildfire using XDA App
thearif said:
I had exactly the same problem. That mark you see on the screen is due to dead pixels. I dropped mine too and I had a spot just like yours. Here is how I solved the problem.
1. Go to ebay and buy an LCD screen for wildfire. I got mine for less than $50. You just need the LCD not the touchscreen digitizer. I think you can get it cheaper.
2 Replace the LCD. I could not find a dissassembly guide for wildfire, but you can follow the Desire guide. They are pretty much the same. I am talking about the steps. Obviously, they different phones.
Since your touchscreen works, it is easier to replace the LCD.
Now my wildfire works fine with a working LCD.
Good luck
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
thank you so much ,ive talked to some guys at gsm services and about all of them told me it's the touchscreen that needs to be replaced..but the touchscreen works perfectly...i think im gonna wait a little and just get more informations together.
ayyroz said:
thank you so much ,ive talked to some guys at gsm services and about all of them told me it's the touchscreen that needs to be replaced..but the touchscreen works perfectly...i think im gonna wait a little and just get more informations together.
Click to expand...
Click to collapse
If the touchscreen is working without any problems then it is just the LCD Screen you need, It is a separate part from the touchscreen.
Where i used to work, the sales team used to rip people off by telling them that the touchscreen and LCD screen came together, but most of the time they don't and can be fitted separately, sometimes however they are together and need to be bought together. I have been inside one of my own wildfires to fit a new touchscreen it didn't go very well but it works......... minus the LED lights and i can tell you the LCD screen can be purchased and fitted separately.
Dude of course it is up to you wheyher you wait or not,
But i am telling you, i had the exactly same issue... My phone fell to the floor and i had the spot on the pictures you posted. It is because of the dead/stuck pixels on your lcd. My touchscreen worked fine too. Just replace the lcd and you are in bussiness.
And I agree with the poster above.
Sent from my HTC Wildfire using XDA App
i had also marks on my LCD but its from water i dont need to fix it so i got used to it
good luck
thanks allot guys
i saw some wildfire lcds at 15$ on eby so i think ill order one right away
thanks
dead pixels arent good but what about my dead "lines" ? it looks like the HTC is censuring everything i want to read

[Q] HTC Desire - cracked screen + digitizer

Hey, xda dev members.
As this is my first post,I've gotta say I used the "search" function here on forum.
I just didn't find what I actually needed.
The thing is : I got my dad's HTC Desire which had been dropped on the ground.
The screen is cracked but the Digitizer looks undamaged imo.
It turns on,I can hear the startup sound,buttons light up etc.
How do I check if other parts are working properly?
I don't really trust repair shops/HTC service is too pricy and I could replace the screen/digitizer by myself with no problem.
Thank you in advance.
P.S. I can post pics if needed.
seems a bit strange that the screen is cracked but the digitizer isn't damaged, can you feel the crack with your nail?
I changed a digitizer not so long ago, it wasn't so difficult.
http://tjworld.net/blog/htc-desire-tear-down
I don't know how much a new screen will cost though.
Yeah,I'm disassembling it at the moment.
I just hate getting cheated/ripped by mobile repair centres,so I'd rather do what I can by myself.
It's strange.. Are you sure that the digitizer is not cracked?
Here in Czech Rep. the LCD for the Desire/NexusOne costs something about $70 (1300Kč)..
Sent from my HTC Desire using XDA Premium App
Here it's approx. 30 $ for digitizer and $50 for the screen.
I guess I'll order both just in case.
The thing is I don't know how to check if everything else is ok.
It was kicked hard but there's sound,button highlight,vibration etc. when I turn it on.
Anyone got idea?
I had the same problem... I crashed really hardly my phone. The digitizer and the LCD were totally broken, but everything worked (sounds, vibration, buttons etc.). So I think that your phone should work normally (besides the screen and maybe the digitizer)... my oppinion
Sent from my HTC Desire using XDA Premium App
Whoa.I'd completely disassembled it and the digitizer looks undamaged.
I haven't got any idea how it's possible since the screen is cracked all over...
[Edit] Any idea how to tell whether it's AMOLED or LCD?
I can't turn it on,so I can't use the methods involving a turned on phone.
Maybe some serial number methods or something?
[/Edit]
Bigf00tPL said:
Whoa.I'd completely disassembled it and the digitizer looks undamaged.
I haven't got any idea how it's possible since the screen is cracked all over...
Click to expand...
Click to collapse
you lucker
Sent from my HTC Desire using XDA Premium App
Just distinguished SLCD from AMOLED by serial numbers.
60H00287 - Samsung AMOLED LCD
60H00443 -Super Sony LCD
Mine was the Samsung.
Ordering a new one,thanks for helping me out.
Can be locked.
For how much?
Sent from my HTC Desire using XDA Premium App
Unfortunately,it's AMOLED,so it costs ~60$(190 PLN).
Sorry for doubleposting but I'm not sure if editing a post will bring the topic up.
I found out that the digitizer connector is probably broken. (pic included)
Any idea if I can get it fixed anywhere?
Please use the Q&A Forum for questions Thanks
Moving to Q&A
hi,
does anyone know if all the digitizers would fit any model???
i have the s-lcd one

The repair, not really

Sent it off for repair because it had screen fitment problems out of the box (screen was loose but didn't ripple, no yellow spots), the casing was perfect and not damaged. When I got the device back from repair, screen was replaced and tightened, but it now ripples on normal touch, has 1 dead pixel, light bleed around the bezel (can be seen in the video, top part of the screen, also around capacitive touch buttons), yellow spot in lower right corner when the phone gets warm AND the casing was damaged in several places.
I'm sending this video to HTC and will demand either my money back or a new device, it is unlocked, but this cannot be caused by software, so they should accept the warranty. Video:
Did they tell you which repair center they sent it to?
Sent from the superior hTC EndeavourU
My screen is like yours out of the box... They don't repair...
Sent from my HTC One X using xda app-developers app
In my opinion this is the repair shop faults.
Either way this is unacceptable. Very sloppy work.
I am very curious how HTC will resolve this.
My last resort is to send my HOX or any other future devices back to their so called repair or service centers. Your major problems will be resolved but additional cosmetic problems will surface such as this gentleman's screen. My first and only experience is purchasing an EVO 3D gsm version from a local yahoo auctions seller in HK. I didnt want to nitpick but the screen had leaks of light when viewing in datkness and it wasnt aligned properly. So i thought what the heck..send it in for repair or servicing...got it back in a week with less light bleed but some of my capacitive lights werent lighting up completely. As if they never checked after other problems were resolved. I ended up selling it for a good 150 dollar loss since i am extremely picky with these screens. Just last week i got the HOX and the darn thing seems to be perfect from the factory but guess what..that small yellow spot pops up when the phone heys to 36 or 37 degrees... Much more annoying than a single dead pixel. I am having an EXCHANGE for another unit but i doubt they will be perfect. For some people stating they have no problems at all...they arent looking hard enough. There is always something imperfect with all the htc phones i have bought. Since the hd2. But whatever...their outter appearance are simply the best looking and i just couldnt pass it up.
Sent from my GT-N7000 using xda premium
@Tw1tchy I just know it was serviced by HTC Germany.
I think I'll get this one replaced, and when I get the replacement, I will just going to sell it and be done with this One X story, too much risk and I don't want to send my phone 1000 km from Croatia to Germany every time I find a problem.
c4Lvin said:
My last resort is to send my HOX or any other future devices back to their so called repair or service centers. Your major problems will be resolved but additional cosmetic problems will surface such as this gentleman's screen. My first and only experience is purchasing an EVO 3D gsm version from a local yahoo auctions seller in HK. I didnt want to nitpick but the screen had leaks of light when viewing in datkness and it wasnt aligned properly. So i thought what the heck..send it in for repair or servicing...got it back in a week with less light bleed but some of my capacitive lights werent lighting up completely. As if they never checked after other problems were resolved. I ended up selling it for a good 150 dollar loss since i am extremely picky with these screens. Just last week i got the HOX and the darn thing seems to be perfect from the factory but guess what..that small yellow spot pops up when the phone heys to 36 or 37 degrees... Much more annoying than a single dead pixel. I am having an EXCHANGE for another unit but i doubt they will be perfect. For some people stating they have no problems at all...they arent looking hard enough. There is always something imperfect with all the htc phones i have bought. Since the hd2. But whatever...their outter appearance are simply the best looking and i just couldnt pass it up.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
My first HOX was like that, small yellow spot when the phone got hotter it was even worst, i send it in for a replacement and i got a truly perfect HOX no yellow spots, dead pixels, dust or whatever! Really happy with HTC right now!
vcrp94 said:
My first HOX was like that, small yellow spot when the phone got hotter it was even worst, i send it in for a replacement and i got a truly perfect HOX no yellow spots, dead pixels, dust or whatever! Really happy with HTC right now!
Click to expand...
Click to collapse
really? I change 6 or 7 in a store... replaced twice brande new phones in HTC assistance...and this one have a new battery, but screen sucks... i give up!!! I can live with this!!! its just a phone...
or i'm just waiting JB to send it to repair again
Seriosly guys...what do you think they do with those opened ones? I guess they just sell it to those other not as picky as us customers eh? since they arent factory sealed like the Samsungs. I personally would never accept one that was opened up and fiddled around with. Just bad!
Sent from my GT-N7000 using xda premium
So, long story short.
I received my device which had screen flex and PUSHED the sevice senter to replace the LCD.
Got back the device today. The LCD Module (LCM) has been changed. But, they made some pinch on side of polycarbonate body, while replacing the LCD.
Also, the screen is more flexible in both left and right edges with loosely fixed screen on left center. Hope it becomes hard after some use and heat.
Just for information, i have replaced 3 devices and sent the fourth one to service center three times till now.
I have given up now & keeping the device. After owning HTC from HTC Hermes times, this is the first device i have seen this much quality control issues.
Earlier, I was confident enough to order HD2 and EVO3D from UK (Iam living in Dubai) when they release those.
Now, i lost that confidence with HTC. I still didn't unlock the device for the same reason. My first time with any HTC device without modding the ROM. HTC should be proud of themselves
I have light bleeding on my one x as well. Its quite annoying but you have to get used to it. I'm not risking sending my one away after I have already been without it for a month
Sent from my HTC One X using xda premium

HOX complete back cover change?

Hi
I have a little problem, I droped my HOX and now it has a little scratch on bottom, you cant even see it, but I know it is there. So did someone ever replaced whole back cover? And another reason for that is that I kinda want white HOX and i have black Can you give me the link where to buy it and is it hard to replace it?
Sent from my HTC One X using xda app-developers app
Yep did mine from a shop on eBay - just search.
Took 10 mins to change. It was surprisingly easy. I went from grey to white. Hardest part is remembering to move the speaker circuit.

Broken Screen Help Please

I dropped my tablet the other day and the screen cracked. Fortunately it didn't affect the "digitizer" (I think it's called). The whole screen still works. No dark spots and the touch screen still works even where it's cracked.
My question is, dies anybody know a reputable place that fixes this? Or, if I can do it myself, what's a good site where I can buy new glass?
Thanks everyone.
P.S. I just got off the phone with Samsung Parts and they wanted $268.78 for the screen!! That's about more than half the price of buying a brand new one! Or a newer model at that! Hopefully someone out there has a cheaper solution to this. Thanks.
Sent from my SM-P600 using XDA Premium HD app
Paulx777 said:
I dropped my tablet the other day and the screen cracked. Fortunately it didn't affect the "digitizer" (I think it's called). The whole screen still works. No dark spots and the touch screen still works even where it's cracked.
My question is, dies anybody know a reputable place that fixes this? Or, if I can do it myself, what's a good site where I can buy new glass?
Thanks everyone.
P.S. I just got off the phone with Samsung Parts and they wanted $268.78 for the screen!! That's about more than half the price of buying a brand new one! Or a newer model at that! Hopefully someone out there has a cheaper solution to this. Thanks.
Sent from my SM-P600 using XDA Premium HD app
Click to expand...
Click to collapse
here is 1 for cheaper,you can just look around before you buy one.your probably better off replacing the screen and digitizer cause its hard to take the the glue off,unless you know how to do it.There are also places that fix cracked screens so i would look around your area.
Here are 2 places that sell screens.
http://www.parts4repair.com/complet...roductsearch&gclid=CKeMuoD6lsUCFabm7AodGEEAkQ
http://www.amazon.com/amazing-zone®-Samsung-Edition-Digitizer-Replacement/dp/B00M2U94C6

Categories

Resources