Develop Bugs

OTA 4.3 bricked my device

O.K So I am new to Android just switched from the apple side of things.... DUN DUN DUN so, this is watsup, I downloaded doin rooted and downgraded firmware to 4.1.1 to unlock phone, well after unlocking phone the 4.3 ota popped up, I was half asleep inadvertanely upgraded now my phone is soft bricked I believe, I can get into download but not recovery, I have spent 3 days trying to figure this out, I have downgraded my firmware and it says pass on odin but then i get stuck in bootloop i'm guessing where it wont go past the "Samsung note 2" screen. please help me! its a very expensive paperweight and now i'm stuck with no phone, please help I have no idea what to do , all I want is a working phone I will get it factory UNLOCKED LOL!, I dont care, I just need help!

JONKEEFE said:
O.K So I am new to Android just switched from the apple side of things.... DUN DUN DUN so, this is watsup, I downloaded doin rooted and downgraded firmware to 4.1.1 to unlock phone, well after unlocking phone the 4.3 ota popped up, I was half asleep inadvertanely upgraded now my phone is soft bricked I believe, I can get into download but not recovery, I have spent 3 days trying to figure this out, I have downgraded my firmware and it says pass on odin but then i get stuck in bootloop i'm guessing where it wont go past the "Samsung note 2" screen. please help me! its a very expensive paperweight and now i'm stuck with no phone, please help I have no idea what to do , all I want is a working phone I will get it factory UNLOCKED LOL!, I dont care, I just need help!
Click to expand...
Click to collapse
I have never had your issue before but I am hoping I'm leading you in the right direction I would Google how to reset back to stock there's a lot of vids on it on YouTube but here's what I think would fix your problem
Sounds like you need to download a factory image go into download mode plug it into Odin and use the factory image to reset it back to normal, word of advise, just root it and learn about ROMs 4.3 is over rated in my opinion 4.4.2 is the newest we have on the aosp side and it is awesome, I highly recommend beanstalk 4.4.2
Also I found this in another post not sure if it applies to you but I'm sure someone else can confirm or deny
"If you update to 4.3...you WILL have a locked bootloader...and currently no good way to root..
Additionally....your KNOX flag will trip and your warranty is toast...if you attempt to root...( as of today, and until the devs can fix Sammy's latest patch)...
Beyond that...you can never go back to 4.1.2 again...
Stay on a 4.1.2 bootloader without KNOX and then you can flash every rom we have along with a full return to stock if you want...
An update to 4.3 will stop any means of going back."
Sent from my GT-N7105 using Tapatalk

No I have done a ton of research and can't figure it out, I feel like i've tried everything. I keep trying to go to stock rom, used Keis, used Odin, Used Heindal, flashed stock recovery roms, flashed stock combo roms, have like 12 counts of custom binary downloads and KNOC WARRANTY VOID : 1 and in download mode in red at the top it says in Odin Mode and then Red in the bottom after it says (in Gray) KNox warranty void: 1 and
AP SWREV A2 it then says in red again unsupported version under those....

Roms? You need a stock image for it to work totally different
Sent from my GT-N7105 using Tapatalk

http://forum.xda-developers.com/showthread.php?t=2581321
HOW-TO Downgrade from 4.3 OFFICIAL MK6 to LJ2 4.1.1
Did you thank your Developer today?

Do not try this!!!!!!!!!!!!!!!!!!!!!!!!!
Jspex said:
http://forum.xda-developers.com/showthread.php?t=2581321
HOW-TO Downgrade from 4.3 OFFICIAL MK6 to LJ2 4.1.1
Did you thank your Developer today?
Click to expand...
Click to collapse
Do NOT try this!!!!
I did, and i bricked my phone!!!!!! You gonna end up with expensive brick. I am noit able to do anything with my phone except for gettinh into download mode, where it says "knox warranty void:1".
Any idea what to do???

fuzio1963 said:
Do NOT try this!!!!
I did, and i bricked my phone!!!!!! You gonna end up with expensive brick. I am noit able to do anything with my phone except for gettinh into download mode, where it says "knox warranty void:1".
Any idea what to do???
Click to expand...
Click to collapse
You did the battery pull part as well? I think the trick is to have your fingers on the buttons first then slide the battery back in to force the recovery but until I try it myself I don't know for sure.
Did you thank your Developer today?

Jspex said:
You did the battery pull part as well? I think the trick is to have your fingers on the buttons first then slide the battery back in to force the recovery but until I try it myself I don't know for sure.
Did you thank your Developer today?
Click to expand...
Click to collapse
Did that right.

I have the same issue..... Had 4.3 ota.... Flashed cwm thru odin. Restarted the phone, it will not boot past the "samsung galaxy note 2" screen. Flashed stock rom thru odin, still stuck at the samsung note 2 screen. I can get into download mode with no issues whatsoever. I cannot get into recovery mode, whether stock or cwm. Nothing. Can I flash another 4.3 or 4.4 rom thru odin? I just need my phone working again..... thanks gentlemen

http://forum.xda-developers.com/show....php?t=2581321
HOW-TO Downgrade from 4.3 OFFICIAL MK6 to LJ2 4.1.1
Do this it works. If it does get stuck on the second Samsung logo pull the battery,
Boot into Stock recovery, and do a factory reset.
It will boot the 4.1.1 stock ROM but it will have the MK6 bootloader. You can flash TWRP or CWM thru ODIN and flash other ROMs. 4.3 ROMs is all I have tried.
I've just spent hours doing this. It's almost impossible to brick this phone. If you do brick it you have done something really really fricking stupid.
I've done a lot of stupid ****, and I have always brought it back to life.

dicksteele said:
http://forum.xda-developers.com/show....php?t=2581321
HOW-TO Downgrade from 4.3 OFFICIAL MK6 to LJ2 4.1.1
Do this it works. If it does get stuck on the second Samsung logo pull the battery,
Boot into Stock recovery, and do a factory reset.
It will boot the 4.1.1 stock ROM but it will have the MK6 bootloader. You can flash TWRP or CWM thru ODIN and flash other ROMs. 4.3 ROMs is all I have tried.
I've just spent hours doing this. It's almost impossible to brick this phone. If you do brick it you have done something really really fricking stupid.
I've done a lot of stupid ****, and I have always brought it back to life.
Click to expand...
Click to collapse
Yup! Fricking stupid------like upgrading from 4.3 to 4.4.1, then in recovery factory reset, and in ODIN trying to get back to 4.1.1 How stupid is that??? If YOU have done this, would you be able to reboot into recovery????? Try it.........

You probably did something wrong. Im the OP of the How to downgrade 4.3 MK6 to LJ2 and Ive done it many time over.

This is the problem i cant get into recovery mode only download, I flashed the firmware from sammobile and did all the steps but it literally wont let me into recovery to wipe the data, I'm stuck on the first samsung Galaxy Note II screen

Have you guys tried to flash cwm or twrp after flashing 4.1.1? Since all you can get into is dl mode try flashing a custom recovery them attempt the battery pull/recovery step.
Did you thank your Developer today?

Jspex said:
Have you guys tried to flash cwm or twrp after flashing 4.1.1? Since all you can get into is dl mode try flashing a custom recovery them attempt the battery pull/recovery step.
Did you thank your Developer today?
Click to expand...
Click to collapse
Agree. Get into DL mode flash TWRP from here.
http://goo.im/devs/OpenRecovery/t0lteatt
It should boot right into recovery.
---------- Post added at 07:31 AM ---------- Previous post was at 07:19 AM ----------
fuzio1963 said:
Yup! Fricking stupid------like upgrading from 4.3 to 4.4.1, then in recovery factory reset, and in ODIN trying to get back to 4.1.1 How stupid is that??? If YOU have done this, would you be able to reboot into recovery????? Try it.........
Click to expand...
Click to collapse
I personally have done it five times in the last two days. Plus ODIN'd MA4.
Actually I've done it the correct way. I have no idea what you are referring to in your post.
From a non-bootable 4.3 OTA, because I installed a mod from the theme/apps section, I flashed the LJ2 in ODIN. It did not boot. I reread the OP and saw that if it didn't boot, do a factory reset.
I flashed it again in ODIN, probably did not need to, it hung.
I pulled battery, did the power/home/up and got to stock recovery. Factory reset it boots.
Testing different scenarios I got boot loops, reflashed LJ2 and did same procedure.
I found out later from Zen all I had to do was flash a recovery and it would fix the error saying I have an error in my firmware, I need to recover using Kies. There was no need for that.
I understand you all can't get to recovery try flashing a custom recovery from ODIN like suggested above.

dicksteele said:
Agree. Get into DL mode flash TWRP from here.
http://goo.im/devs/OpenRecovery/t0lteatt
It should boot right into recovery.
---------- Post added at 07:31 AM ---------- Previous post was at 07:19 AM ----------
I personally have done it five times in the last two days. Plus ODIN'd MA4.
Actually I've done it the correct way. I have no idea what you are referring to in your post.
From a non-bootable 4.3 OTA, because I installed a mod from the theme/apps section, I flashed the LJ2 in ODIN. It did not boot. I reread the OP and saw that if it didn't boot, do a factory reset.
I flashed it again in ODIN, probably did not need to, it hung.
I pulled battery, did the power/home/up and got to stock recovery. Factory reset it boots.
Testing different scenarios I got boot loops, reflashed LJ2 and did same procedure.
I found out later from Zen all I had to do was flash a recovery and it would fix the error saying I have an error in my firmware, I need to recover using Kies. There was no need for that.
I understand you all can't get to recovery try flashing a custom recovery from ODIN like suggested above.
Click to expand...
Click to collapse
I was trying to say: even I have done this step-by-step, after battery pull out, I still canNOT boot into recovery! Even i flashed recovery into my phone via odin, after flashing 4.1.1 It just shows Galaxy Note II screen.......what is it, you are NOT getting??

fuzio1963 said:
I was trying to say: even I have done this step-by-step, after battery pull out, I still canNOT boot into recovery! Even i flashed recovery into my phone via odin, after flashing 4.1.1 It just shows Galaxy Note II screen.......what is it, you are NOT getting??
Click to expand...
Click to collapse
I can honestly say that I will be done trying to help you with this. What YOU are not getting is we are trying to help YOU fix YOUR mistake.
I understand it is frustrating when you hit a snag that leaves your phone in soft brick form but as EVERY OP states you are doing these things AT YOUR OWN RISK. Getting angry and impatient with those that are trying to help will get you nowhere fast.
Good luck fixing your phone and I really hope you get this figured out.
Did you thank your Developer today?

fuzio1963 said:
I was trying to say: even I have done this step-by-step, after battery pull out, I still canNOT boot into recovery! Even i flashed recovery into my phone via odin, after flashing 4.1.1 It just shows Galaxy Note II screen.......what is it, you are NOT getting??
Click to expand...
Click to collapse
I'm getting from every post I have read that you've done in multiple threads, you don't desire any help.
That's what I get.
EDIT : Damn Jspex beat me to it.
EDIT 2: OP, I'll PM you and give you my contact info and see if we can get you going.

As to not let one person ruin the OPs chances of fixing things here is a good way to get into recovery that does take a little know how. Its always good to know the basics of adb anyway when modding android devices.
http://forum.xda-developers.com/showthread.php?t=1853159
Did you thank your Developer today?

Jspex said:
Last resort:
http://forum.xda-developers.com/showthread.php?t=1853159
Did you thank your Developer today?
Click to expand...
Click to collapse
If your device is not being recognized try a different USB port.
Or from the command prompt;
type "adb kill-server"
then type "adb devices", adb will restart on port 5307.
No quotes of course

[Q] SGH-I317 Can't enter recovery mode

I have searched these forums and everywhere else I can find mentioning this problem online, but nothing has worked yet. I'm hoping someone here may be able to point me in the right direction.
I rooted my AT&T Galaxy Note 2 SGH-I317 a couple weeks ago and was messing around and stupidly tried upgrading to 4.3, and now I can't boot and can't enter recovery mode. NOTE: Download mode works just fine, either by manually holding Volume Down/Home/Power or by using a USB Jig, I just can't enter recovery mode by holding Volume Up/Home/Power
I am able to flash just fine with Odin (I have tried version 3.07 and 3.09), it says Pass every time but the darn phone still won't boot and won't let me into recovery mode so that I may clear the cache and get it to boot.
I have tried flashing back to the factory firmware, to which Odin says Pass but still no go on the boot.
I have also tried setting up an ADB connection in Windows 7 (so that I may get the phone into recovery mode without hardware buttons), but since my computer will only recognize the phone when it's in download mode (since I can't boot the phone so Windows 7 will see it like it normally would) ADB won't work.
I'm at my wits end here, does anyone have any clue how I may fix this problem? What's really frustrating is I just bought a Galaxy Gear Watch and about a week later messed up my phone
Thanks, and I appreciate any help you can give me.
EDIT: Forgot to mention something. When I turn the power to the phone on and don't enter download mode, it stays on the Samsung Galaxy Note II screen, and that's all that happens.
Also, this is exactly what my Download screen info says:
FACTORY MODE
PRODUCT NAME: SGH-I317
CUSTOM BINARY DOWNLOAD: Yes(6 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Official
KNOX WARRANTY VOID: 1
RP SWREV: A2

Got the phone to finally boot up
I finally got my phone to at least boot up. Although, I still can't get into recovery mode.
I followed this post: http://forum.xda-developers.com/showthread.php?t=2596256 and downloaded this file
It boots, and is currently 4.1.2, however when I try to get to recovery mode, the graphics flicker and the screen goes blank for a couple mins then reboots to the OS.

geekinator said:
I finally got my phone to at least boot up. Although, I still can't get into recovery mode.
I followed this post: http://forum.xda-developers.com/showthread.php?t=2596256 and downloaded this file
It boots, and is currently 4.1.2, however when I try to get to recovery mode, the graphics flicker and the screen goes blank for a couple mins then reboots to the OS.
Click to expand...
Click to collapse
I had a similar issue moving from Jedi to Jedi Master X.
I had to use an older Odin 2.85 to install a CWM recovery(I prefer TWRP UI)
Once I had the CWM I could install Jedi Master X2 and I had to wait about 30 mins for it to get through boot.
I thought I had a good soft brick but eventually I found a combiination of Odin, recovery and Rom to get it to work.
Good Luck

Recovery screen is now up!
After I was able to boot, I tried flashing again to stock firmware, and this time the recovery menu works just fine! I'm almost back to where I need to be. After resetting to factory defaults, I'm hoping I can do an OTA update to 4.3 so my Galaxy Gear will work again.

geekinator said:
After I was able to boot, I tried flashing again to stock firmware, and this time the recovery menu works just fine! I'm almost back to where I need to be. After resetting to factory defaults, I'm hoping I can do an OTA update to 4.3 so my Galaxy Gear will work again.
Click to expand...
Click to collapse
Update to 4.3 official will fail if you have a custom recovery...
I suggest using the leaked 4.3 we have...
It will give you all of the gear functions....and allow you to keep root and dump the bloat that you don't want...
A best case situation ....IMHO....g
Sent from my NOTE 2.750...
Courtesy of our amazing developers...

geekinator said:
After I was able to boot, I tried flashing again to stock firmware, and this time the recovery menu works just fine! I'm almost back to where I need to be. After resetting to factory defaults, I'm hoping I can do an OTA update to 4.3 so my Galaxy Gear will work again.
Click to expand...
Click to collapse
Glad you were able to figure it out... I just had a similar problem because TWRP froze up on me halfway through flashing a ROM. Had to ODIN CWMR back on and flash a ROM... lesson learned... always keep a ROM on your SD card in case your phone soft bricks - if you can get into download mode at least you will be able to work around it!!

I'll give that a try
gregsarg said:
Update to 4.3 official will fail if you have a custom recovery...
I suggest using the leaked 4.3 we have...
It will give you all of the gear functions....and allow you to keep root and dump the bloat that you don't want...
A best case situation ....IMHO....g
Sent from my NOTE 2.750...
Courtesy of our amazing developers...
Click to expand...
Click to collapse
Thanks, I'll definitely give that a try.

geekinator said:
Thanks, I'll definitely give that a try.
Click to expand...
Click to collapse
Instead of the leaked you can use the official without locking yourself into the 4.3 bootloader
http://forum.xda-developers.com/showthread.php?t=2589891

hi to all my senior
---------- Post added at 07:25 AM ---------- Previous post was at 07:17 AM ----------
i have problem with my samsung note 2 i317 of white screen of death i tried flashing with many file but no successes it always fail (ODIN) with latest version im able to go to download mode tryed with most of the firmware please help if any body can thankks in adv.
FACTORY MODE
PRODUCT NAME:
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY:Samsung official
SYSTEM STATUS: Custom
this much it shows on the download mode screen pls help Thanks.

i have problem with my samsung note 2 i317 of white screen of death i tried flashing with many file but no successes it always fail (ODIN) with latest version im able to go to download mode tryed with most of the firmware please help if any body can thankks in adv.
FACTORY MODE
PRODUCT NAME:
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY:Samsung official
SYSTEM STATUS: Custom
this much it shows on the download mode screen pls help Thanks.

[Q] Stuck in boot loop, trying to return to stock, I think I need to use PIT file

Hi all. I'm in a real pickle here and hoping someone can tell me how to get out of this mess. It's a bit of a long story, but I'll summarise as best I can.
I've had my Galaxy Note 2 LTE (N7105) for a year and I rooted it pretty much the day after I got it. I'm not new to rooting at all (fourth Android device since 2010, all rooted), but I still feel like a noob at times. Over this 2014 Easter period I had time off so I decided to change ROMs.
I was previously using CM 11, which I had been using pretty much since I rooted. And I had updated CM at least once a month, sometimes more frequently. So I was looking for some new ROMs, downloaded about 5 and tried them out. The last two I tried was OmniROM (a 4.4.2 ROM) and CM 11 Remix (also a 4.4.2 ROM). I was using TWRP 2.7.0.2 to do the wipes, caches, flashes, etc. I had no issues flashing OmniROM, but when I flashed CM 11 Remix, I couldn't get in the first time. I was stuck in a boot loop. I pulled the battery, got back into recovery and tried flashing again. Still boot looping. I think the mistake I made was a Data Format. Either way, I finally got CM 11 Remix to load by first wiping, flashing the ROM, GApps, a sensor fix, a camera fix, Devil Kernel and then Super SU. However once in the ROM I was getting constant Google Play Store / Services FCs. Oh, and yes, I went through the typical brand new Android setups, entering my Google account and so on... I found that if I cleared data / caches on both Google Play Store app and Google Play Services app, it gave me temporary joy but as soon as I tried to download any app in Google Play I'd get the FC. Also, my signal was totally gone. I tried flashing back to OmniROM as it was my last known good and working ROM, but now that was boot looping. I even tried some of the other ROMs from that bunch I had, including AOKP. All would boot loop.
So after much trying different GApp packages, I decided to best thing to do would be restore it to stock, root again, then go for the custom ROM (hopefully CM 11 Remix) from a nice clean slate. So I did this. I downloaded the Android 4.3 stock ROM from SamMobile here. Installed Odin 3.07, then loaded it up and flashed the stock ROM. All seemed to go great, but when the ROM was done and phone rebooted, I get stuck in another boot loop! This time at the white "Samsung" logo with the glowing blue edges. Not the model number screen. Also my LED light is on blue, if that means anything.
So I found this thread (post at top of page) which suggests I need to flash the PIT file during the stock ROM installation with Odin. So I found the PIT file here, and I'm ready to flash this along with the stock ROM... HOWEVER, I read something somewhere (can't find it now) that implied if I'm on Android 4.3, flashing a PIT is a bad move. Can anyone comment on that? I guessing since the stock ROM is 4.3, I'm technically on 4.3 (even though I can't get into it).
Or if anything else I'm doing immediately stands out as a seriously stupid move, please let me know. I've been without normal use of my phone for a couple days now and ironically I'm at the point where I'm considering going without a phone for the rest of my life... LOL! AS IF I COULD!
Anyways, any help will be much appreciated!
EDIT: I just realised I should have posted in Troubleshooting, not General Questions... If mods want to move this, please do.

i just suggest that you flash the stock odin without the pit and see if its working out or not. sometimes playing with pit files can screw up your device even more...
btw... next time you play flashing... i'm suggesting you make a backup of your working custom. its will save you lots of time if this kind of problem happen.

edan1979 said:
i just suggest that you flash the stock odin without the pit and see if its working out or not. sometimes playing with pit files can screw up your device even more...
btw... next time you play flashing... i'm suggesting you make a backup of your working custom. its will save you lots of time if this kind of problem happen.
Click to expand...
Click to collapse
I don't have any working ROM. All I have now is a boot loop.

invertedskull said:
I don't have any working ROM. All I have now is a boot loop.
Click to expand...
Click to collapse
I had a problem with my device where I was stuck at boot loader as well, but it was from the rar file of the rom(cm 11) cause I tried downloading it again and it worked.
I suggest you prepare Odin and the stock firmware, wipe factory/cache dalvik, system (advanced), then flash stock firmware, to bring everything back to normal.

Banutu said:
I had a problem with my device where I was stuck at boot loader as well, but it was from the rar file of the rom(cm 11) cause I tried downloading it again and it worked.
I suggest you prepare Odin and the stock firmware, wipe factory/cache dalvik, system (advanced), then flash stock firmware, to bring everything back to normal.
Click to expand...
Click to collapse
Hmmm, I'm not stuck at boot loader, just boot loop. Maybe you meant that?
To clarify, all I can do now is...
1. Boot normally and end up in a boot loop (at "Samsung" white logo with glowing blue edges).
2. Boot into Download mode and from there I can use Odin to flash / install.
3. Boot into stock recovery, which I've never used before (only ever used custom recovery).
I've prepped Odin again, ready to flash the stock firmware, but I've never done a wipe / factory reset with Odin. I don't see any Advanced settings? Did you mean I can do it elsewhere? Cos I see I can do wipes / factory reset from stock recovery.
So should I do that AND then go into Download mode and flash stock firmware with Odin?

invertedskull said:
Hmmm, I'm not stuck at boot loader, just boot loop. Maybe you meant that?
To clarify, all I can do now is...
1. Boot normally and end up in a boot loop (at "Samsung" white logo with glowing blue edges).
2. Boot into Download mode and from there I can use Odin to flash / install.
3. Boot into stock recovery, which I've never used before (only ever used custom recovery).
I've prepped Odin again, ready to flash the stock firmware, but I've never done a wipe / factory reset with Odin. I don't see any Advanced settings? Did you mean I can do it elsewhere? Cos I see I can do wipes / factory reset from stock recovery.
So should I do that AND then go into Download mode and flash stock firmware with Odin?
Click to expand...
Click to collapse
ohhh my bad, I meant boot loop (stuck at samsung logo), mine was stuck there but then after it restarts and goes into recovery mode
do these following steps and you should be fine with your device.
1. Go into recovery mode
2. Wipe factory/reset
3. Wipe cache
4. Wipe dalvik
5. Advance > format/system
Now you have no rom or any OS to load,
1. Power off the device
2. Open Odin on your PC(right click run as administrator)
3. power on your note in Download Mode
4. Connect your device to your PC via USB
5. odin should recognize your device, something blue like " ID" or something there, you should be familiar with that.
6. click PDA, and find the official stock firmware zip you got it from samsung website, and make sure it fits your device(for example if you have your note from italy you should have ITV)
7. Hit Start and it should finish in 5-10 minutes.
Its the cleanest way with Odin, I did some crap on my device and that's how I return it to normal.

Banutu said:
ohhh my bad, I meant boot loop (stuck at samsung logo), mine was stuck there but then after it restarts and goes into recovery mode
do these following steps and you should be fine with your device.
1. Go into recovery mode
2. Wipe factory/reset
3. Wipe cache
4. Wipe dalvik
5. Advance > format/system
Now you have no rom or any OS to load,
1. Power off the device
2. Open Odin on your PC(right click run as administrator)
3. power on your note in Download Mode
4. Connect your device to your PC via USB
5. odin should recognize your device, something blue like " ID" or something there, you should be familiar with that.
6. click PDA, and find the official stock firmware zip you got it from samsung website, and make sure it fits your device(for example if you have your note from italy you should have ITV)
7. Hit Start and it should finish in 5-10 minutes.
Its the cleanest way with Odin, I did some crap on my device and that's how I return it to normal.
Click to expand...
Click to collapse
All good! Cheers man!
I actually went ahead and booted into stock recovery and did the factory reset and partition wipe before I saw your post. And the stock firmware I'd flashed with Odin previously is now booting and I'm finally back in!!! WOOOOOOOOO!!!
Just need to root this bad boy and get back to a nice shiny custom ROM.
Thanks for the advice everyone!

invertedskull said:
All good! Cheers man!
I actually went ahead and booted into stock recovery and did the factory reset and partition wipe before I saw your post. And the stock firmware I'd flashed with Odin previously is now booting and I'm finally back in!!! WOOOOOOOOO!!!
Just need to root this bad boy and get back to a nice shiny custom ROM.
Thanks for the advice everyone!
Click to expand...
Click to collapse
I'm glad to hear that man, peace ^^

Banutu said:
I'm glad to hear that man, peace ^^
Click to expand...
Click to collapse
I have another hurdle... Some built in security is stopping SuperSU from running. It's not Knox, but something like it. I get this error message:
"Unauthorized access to a secured area has been blocked. Tap here for more info."
How can I disable this? I've searched on Google already but so far nothing is helping and I can mostly only find info about Knox...
EDIT: It was goddamn Knox all along... And I just disabled it by means of SuperSU. Finally!

invertedskull said:
I have another hurdle... Some built in security is stopping SuperSU from running. It's not Knox, but something like it. I get this error message:
"Unauthorized access to a secured area has been blocked. Tap here for more info."
How can I disable this? I've searched on Google already but so far nothing is helping and I can mostly only find info about Knox...
EDIT: It was goddamn Knox all along... And I just disabled it by means of SuperSU. Finally!
Click to expand...
Click to collapse
Lolol, see your finding your way on your own ^_^, I was about to give you this link and suggest you to read the comments as well
http://www.w0lfdroid.com/2013/12/Fix-Root-Problem-on-Android-4.3-for-Galaxy-S3-S4-Note2-Note3.html
Unfortunately for me I don't have Note 2 =(, I have an S II Plus, I hope to get Note 2 next month can't wait =S

Banutu said:
Lolol, see your finding your way on your own ^_^, I was about to give you this link and suggest you to read the comments as well
http://www.w0lfdroid.com/2013/12/Fix-Root-Problem-on-Android-4.3-for-Galaxy-S3-S4-Note2-Note3.html
Unfortunately for me I don't have Note 2 =(, I have an S II Plus, I hope to get Note 2 next month can't wait =S
Click to expand...
Click to collapse
Heh, yeah, all is well in my world once again!
The Note 2 is a great device man. I am sure you'll love it. The Note 3 looks great also, but I don't like the ribbed sides (I'm fussy) and last I read there's an eFuze that goes off once rooted or something along those lines. That's sh!t.

invertedskull said:
Heh, yeah, all is well in my world once again!
The Note 2 is a great device man. I am sure you'll love it. The Note 3 looks great also, but I don't like the ribbed sides (I'm fussy) and last I read there's an eFuze that goes off once rooted or something along those lines. That's sh!t.
Click to expand...
Click to collapse
What do you think about the new oneplus one, do you think I should get that instead?
Sent from my GT-I9105P using Tapatalk

Banutu said:
What do you think about the new oneplus one, do you think I should get that instead?
Sent from my GT-I9105P using Tapatalk
Click to expand...
Click to collapse
Hmmm, I haven't seen that one... Feel free to PM me a link.

Help Me!
Banutu said:
I'm glad to hear that man, peace ^^
Click to expand...
Click to collapse
My case is the same case of Invertedskull. I already did all steps as you instructed. I wiped data/cache/system and flash a stock room 4.4.2 of Nordic Rom on SamMobile website.
After flashed, the looping still happens. When I put the charger, the looping stops and goes to the main screen normally. Sometimes, it suddenly restarts but not frequently.
OMG! How to stop it. Pls help me.
My Note 2 is N7105 LTE - Optus (Australia)

mroldman281 said:
My case is the same case of Invertedskull. I already did all steps as you instructed. I wiped data/cache/system and flash a stock room 4.4.2 of Nordic Rom on SamMobile website.
After flashed, the looping still happens. When I put the charger, the looping stops and goes to the main screen normally. Sometimes, it suddenly restarts but not frequently.
OMG! How to stop it. Pls help me.
My Note 2 is N7105 LTE - Optus (Australia)
Click to expand...
Click to collapse
If you have access to anything, and don't get JUST the boot loop, then you DO NOT have the same case I was in. You are probably able to recover from this. Try posting on the Tf Forums. The guys over there are "specialists" in Asus Tf tablets, and as you'll see on this thread (http://www.transformerforums.com/fo...-boot-loop-after-doing-routine-cm-update.html), they gave me a lot of help. Not that I was able to recover, but they were awesome dudes.

mroldman281 said:
My case is the same case of Invertedskull. I already did all steps as you instructed. I wiped data/cache/system and flash a stock room 4.4.2 of Nordic Rom on SamMobile website.
After flashed, the looping still happens. When I put the charger, the looping stops and goes to the main screen normally. Sometimes, it suddenly restarts but not frequently.
OMG! How to stop it. Pls help me.
My Note 2 is N7105 LTE - Optus (Australia)
Click to expand...
Click to collapse
mroldman281, You didn't post again, so I don't know, If You found solution, but since I had same simptoms, and after four days of reinstalling different stock roms, wiping and even messing with PIT via Odin etc..I can say, that in my case the reason for boot loop was faulty battery. The phone worked when it was plugged in and restarted soon after i unplugged USB cable, and just lopped afterwards. Replacement battery put everything back in order. And I am one happy Camper!
Hope this info helps someone else with boot loop problem

same problem stuck in bootloop
hey guys i have the same problem bootloop all the time i tryied stock firmware but nothing happend avec i rooted my note 2 and intalled a costom recovery and a many roms but stuck in bootloop i didn't chage baterry , by the way i wiped cache and reset factory and clear dalvick cache but the same always bootloop
what u suggest i do
ps : i can acces to bootloader or download mode it charge normally

woow get back my note 2 lte alone
hey guys i get back my note 2 i don't know how but it was a succes :victory:
first : i tried so many afficial firmware 4.4.2 and costom roms but didn't change the problem of bootloop
then i remembred what version i was in it was 4.1.1 so i download it from sammobiles thenks to them flash it and boooom the note 2 lte start like a charm
i want to thanks everyone for their help even if they didn't help directly but this past 3 days i read almost all the threads about note 2
well i thinks one of the selutions here is to revert back the the original stock firmware like i did so maybe will fix the bootloop

Bootloops After ODIN back to Stock Firmware

Hi guys,
I have the t-mobile s6 edge
After messing around with my device last night and this morning, I decided to go back to stock for a bit.
I have ODIN 3.10.6. I went into download mode on my phone. extracted the stock firmware from this thread: http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841
loaded the "G925TUVU1AOCG_G925TTMB1AOCG_G925TUVU1AOCG_HOME.tar.md5" file into the ap box for odin
connected my phone to computer, odin recognized it. hit start. ran successfully. rebooted, android guy came up briefly and said installing system update, then it changed to "Erasing..." then it rebooted again
now it's just bootloops forever after the tmobile screen. I can boot to recovery and it says installing system update each time I boot to recovery, but selecting reboot system there shows a no command error. force the phone to power off... power on again to bootloops.
tried to go into download mode again and reflash everything through odin, same issue!
I started last night by rooting using chainfire, then installing TWRPv2, then I flashed the 5.1.1 ROM available from @eousphoros (sorry for the tag, just thought you might want to be apprised of the issues in getting back to stock after using the 5.1.1 ROM).
with 5.1.1 loaded, smart switch didn't recognize the phone for a reset so I decided to go with the ODIN method and now i'm in bootloop city
any help would be greatly appreciated

kswa1987 said:
Hi guys,
I have the t-mobile s6 edge
After messing around with my device last night and this morning, I decided to go back to stock for a bit.
I have ODIN 3.10.6. I went into download mode on my phone. extracted the stock firmware from this thread: http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841
loaded the "G925TUVU1AOCG_G925TTMB1AOCG_G925TUVU1AOCG_HOME.tar.md5" file into the ap box for odin
connected my phone to computer, odin recognized it. hit start. ran successfully. rebooted, android guy came up briefly and said installing system update, then it changed to "Erasing..." then it rebooted again
now it's just bootloops forever after the tmobile screen. I can boot to recovery and it says installing system update each time I boot to recovery, but selecting reboot system there shows a no command error. force the phone to power off... power on again to bootloops.
tried to go into download mode again and reflash everything through odin, same issue!
I started last night by rooting using chainfire, then installing TWRPv2, then I flashed the 5.1.1 ROM available from @eousphoros (sorry for the tag, just thought you might want to be apprised of the issues in getting back to stock after using the 5.1.1 ROM).
with 5.1.1 loaded, smart switch didn't recognize the phone for a reset so I decided to go with the ODIN method and now i'm in bootloop city
any help would be greatly appreciated
Click to expand...
Click to collapse
You probably need to do a factory reset
In the future you should make a full backup before installing a rom

kswa1987 said:
Hi guys,
I have the t-mobile s6 edge
After messing around with my device last night and this morning, I decided to go back to stock for a bit.
I have ODIN 3.10.6. I went into download mode on my phone. extracted the stock firmware from this thread: http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841
loaded the "G925TUVU1AOCG_G925TTMB1AOCG_G925TUVU1AOCG_HOME.tar.md5" file into the ap box for odin
connected my phone to computer, odin recognized it. hit start. ran successfully. rebooted, android guy came up briefly and said installing system update, then it changed to "Erasing..." then it rebooted again
now it's just bootloops forever after the tmobile screen. I can boot to recovery and it says installing system update each time I boot to recovery, but selecting reboot system there shows a no command error. force the phone to power off... power on again to bootloops.
tried to go into download mode again and reflash everything through odin, same issue!
I started last night by rooting using chainfire, then installing TWRPv2, then I flashed the 5.1.1 ROM available from @eousphoros (sorry for the tag, just thought you might want to be apprised of the issues in getting back to stock after using the 5.1.1 ROM).
with 5.1.1 loaded, smart switch didn't recognize the phone for a reset so I decided to go with the ODIN method and now i'm in bootloop city
any help would be greatly appreciated
Click to expand...
Click to collapse
AHH!! Sorry to have made this post... here's what I did to get it actually boot:
reflahed the stock firmware through odin again, tried to reboot, it failed, obviously. rebooted to recovery, factory reset in recovery, power down option in recovery, then turned the phone on again and it magically worked!
hopefully this post will help someone who encountered the same issue

eousphoros said:
You probably need to do a factory reset
In the future you should make a full backup before installing a rom
Click to expand...
Click to collapse
thank you so much for the quick reply, I ended up figuring out the solution while you were typing. sorry to pull you away from other tasks. I have several backups saved to my PC but thank you for the reminder!! :laugh::laugh:

kswa1987 said:
AHH!! Sorry to have made this post... here's what I did to get it actually boot:
reflahed the stock firmware through odin again, tried to reboot, it failed, obviously. rebooted to recovery, factory reset in recovery, power down option in recovery, then turned the phone on again and it magically worked!
hopefully this post will help someone who encountered the same issue
Click to expand...
Click to collapse
I had the same excat same thing happen when flashing this via Odin. I didnt need to Odin stock twice though . I just booted stock recovery and did a factory reset. After that I went ahead an powered down and rebooted . All good now

How long did you have to wait in the stock recovery to get past the "installing system update" screen? Mine just sits there and I'm unable to view other options in recovery.
EDIT for noobs (like me): wait 30 seconds on the "installing system update" screen.

I'm still stuck in boot loop
Im in the same exact situation , but I'm still stuck in boot loop. I followed your restore instructions and nothing. Please help.

Creel711 said:
Im in the same exact situation , but I'm still stuck in boot loop. I followed your restore instructions and nothing. Please help.
Click to expand...
Click to collapse
Looks here, may apply to your case. http://forum.xda-developers.com/showthread.php?p=63226466
Pp.

I initially used odin to flash OI1 update, after a rom I was using caused problems and I got bootloop. It changed bootloader value to b:3 and I'm unable to downgrade now so I used smart switch which didn't recognize device so used emergency recovery and still bootloop. I have factory reset and wipe cache multiple times along with adb side load and individual flashes of bootloader, modem, kernel, flashed custom kernel and twrp to access fix permissions and to mount partitions with advanced wipe etc and still wont boot past logo. Also during one fix attempt phone said can't mount system.. Idk I'm not understanding where the problem is .everything says successful but I'm still in bootloop. Please help. I've spent hours everyday for the past week searching & trying different things that seem might help so open to any suggestions.

Problem with Samsung Galaxy S4 Mini GT-I9195
Hi everyone
I'm new to the whole ROM flashing and using Odin. I had a bootloop problem and recovery mode showed all the options but has a green android man laying down with red icon above him and No Command below the android man. Tried the factory wipe and cache wipe but it gives some red writing with the word failed in the coding and the word error under the android man. Tried to flash a stock ROM from sammobile using Odin. Odin gives a pass but the same problems persist. Can someone please help?

any solution, i have this problem to? only bootloop, nothing else. Updatet bootloader with 4up

kswa1987 said:
Hi guys,
I have the t-mobile s6 edge
After messing around with my device last night and this morning, I decided to go back to stock for a bit.
I have ODIN 3.10.6. I went into download mode on my phone. extracted the stock firmware from this thread: http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841
loaded the "G925TUVU1AOCG_G925TTMB1AOCG_G925TUVU1AOCG_HOME.tar.md5" file into the ap box for odin
connected my phone to computer, odin recognized it. hit start. ran successfully. rebooted, android guy came up briefly and said installing system update, then it changed to "Erasing..." then it rebooted again
now it's just bootloops forever after the tmobile screen. I can boot to recovery and it says installing system update each time I boot to recovery, but selecting reboot system there shows a no command error. force the phone to power off... power on again to bootloops.
tried to go into download mode again and reflash everything through odin, same issue!
I started last night by rooting using chainfire, then installing TWRPv2, then I flashed the 5.1.1 ROM available from @eousphoros (sorry for the tag, just thought you might want to be apprised of the issues in getting back to stock after using the 5.1.1 ROM).
with 5.1.1 loaded, smart switch didn't recognize the phone for a reset so I decided to go with the ODIN method and now i'm in bootloop city
any help would be greatly appreciated
Click to expand...
Click to collapse
had the same issue ... did a factory wipe...(had lineage os 14 installed with gapps 7.1.1) flashed stock rom using odin(success) . stuck in bootloop(samsung logo fades in and out) pleaase help (sm-g900H)

Very usefull post, same issue, solved trough recovery->wipedata/factoryreset. Thanks!!!!

my s6 was freezing and restarting again and again, I reinstalled the firmware for odin and then it didn't encounter any problem for a whole day but now i have the same problem again - freezing and restarting
any help would be appreciated
I am already done with factory reset and wiping cache partition but still nothing turnout to be helpful

Hi Please help me.
I did everything that mentioned but no succes at all. Any new suggestion?
Btw my phone passing ODIN and stuck in "installing system updates then erasing"

hello
i need downgred g925t frome androide 7 to 6 or 5.1.1
can anyone help me
im flashed phone whit dis frimwer from anroide 7 G925TUVS6FRC1_G925TTMB6FRC1_TMB
im dawnloaded this frimwer 4Files-G925TTMB3EPD1-6.0.1-By-NoLoGiG but not work or not flashed have error

Stuck in "blue" screen/odin and can't flash anything successfully

So I attempted to flash the renegade rom...do not think this has anything to do with that in particular, but now I'm stuck on the screen that says the software was not installed correctly. Holding down the power, volume up and home buttons will get me back to odin but when I try to flash anything in Odin (3.10.6), it gets about 20% done and fails. I can't get into the stock recovery again. Before this happened, I was on stock OI1 and had developer options up and bootloader option on , I tried to flash TWRP but kept getting an error, then I had flashed the unikernel (V6 I believe). The phone booted correctly, but the touch screen didn't work. I rebooted several time and tried again, still screen problem. I went into the stock recovery and did a factory reset, booted, screen still didn't work. I went back to odin tried to flash the G920PVPU3BOI1_G920PSPT3BOI1_G920PVPU3BOI1_HOME.tar, but it halted with the fail message at about 20%. Tried again, failed at same time point. Very frustrating because I've successfully rooted and installed multiple roms on my S4 and Evo prior.
At this point I am stuck in the blue screen that says you need to do smart switch to do an emergency recovery, I can get this over to odin, but not recovery. I tried both smart switch and Kies, and both say the phone isn't supported by the software(s). Yes, the drivers were installed prior to. I've tried waiting for the battery to discharge as well, nothing.
I'm at a loss of what to do now. Phone is inoperable and I can't even get into a screen that tells me anything about versions of hardware or software. The barcode is still intact and I can still get into Odin, but nothing more than that. Stock kernel to flash? Why won't odin finish the upgrades? Anything?
The phone is about to go in the trash...Help!

sfinkedbeef said:
So I attempted to flash the renegade rom...do not think this has anything to do with that in particular, but now I'm stuck on the screen that says the software was not installed correctly. Holding down the power, volume up and home buttons will get me back to odin but when I try to flash anything in Odin (3.10.6), it gets about 20% done and fails. I can't get into the stock recovery again. Before this happened, I was on stock OI1 and had developer options up and bootloader option on , I tried to flash TWRP but kept getting an error, then I had flashed the unikernel (V6 I believe). The phone booted correctly, but the touch screen didn't work. I rebooted several time and tried again, still screen problem. I went into the stock recovery and did a factory reset, booted, screen still didn't work. I went back to odin tried to flash the G920PVPU3BOI1_G920PSPT3BOI1_G920PVPU3BOI1_HOME.tar, but it halted with the fail message at about 20%. Tried again, failed at same time point. Very frustrating because I've successfully rooted and installed multiple roms on my S4 and Evo prior.
At this point I am stuck in the blue screen that says you need to do smart switch to do an emergency recovery, I can get this over to odin, but not recovery. I tried both smart switch and Kies, and both say the phone isn't supported by the software(s). Yes, the drivers were installed prior to. I've tried waiting for the battery to discharge as well, nothing.
I'm at a loss of what to do now. Phone is inoperable and I can't even get into a screen that tells me anything about versions of hardware or software. The barcode is still intact and I can still get into Odin, but nothing more than that. Stock kernel to flash? Why won't odin finish the upgrades? Anything?
Odin Screen Reads:
ODIN MODE (red)
PRODUCT NAME: SM-G920P (white)
CURRENT BINARY: Samsung Official (white)
SYSTEM STATUS: Custom (White)
FRP LOCK: OFF (white)
Secure Download: Enabled (blue)
KNOW WARRANRY VOID: 1 (0x0384) (gray)
AP SWREV: B:3 K:2 S:2 (gray)
The phone is about to go in the trash...Help!
Click to expand...
Click to collapse

What I would recommend doing is to try using Kies 3 its pretty much Samsung's take on iTunes. It maybe able to help you. Otherwise, try redownloading the latest tar avabile which is: OJ7 also, try Odin v3.10.7

1619415 said:
What I would recommend doing is to try using Kies 3 its pretty much Samsung's take on iTunes. It maybe able to help you. Otherwise, try redownloading the latest tar avabile which is: OJ7 also, try Odin v3.10.7
Click to expand...
Click to collapse
Thanks for replying.
I tried Kies and Smart Switch, but both did not recognize phone. I did manage to find out that TWRP has a sprint variant and that it seems to be incorrectly labeled in many posts. The sprint variant is 2.8.7.0 NOT 2.8.7.1. I managed to flash it in ODIN and now it boots into Recovery, which is a start. I tried applying the renegade rom, but it wouldn't finish and I'm left with a 'no OS detected, do you want to reboot?' from TWRP.
TWRP website isn't much help (but I love that product). At this point, still cannot tell what firmware is on device and where to go from here. I think I may need a recovery of some sort, but don't have. Tried flashing OJ7 tar as recommeded but it continues to fail when it hits the 'system' part of the download.
Still need advice/help....etc.

Since you are now in recovery, wipe everything!
Cache, System, Data, Internal Data and Dalvik Cache. After that, reboot into Odin and try restoring once more in odin. If that does not work, then wipe everything again and try installing Renegade once more.

1619415 said:
Since you are now in recovery, wipe everything!
Cache, System, Data, Internal Data and Dalvik Cache. After that, reboot into Odin and try restoring once more in odin. If that does not work, then wipe everything again and try installing Renegade once more.
Click to expand...
Click to collapse
Thank for the reply. I did just that and after installing Renegade with kernel version 8, three times, the phone is up and running. Really appreciate the help.

sfinkedbeef said:
Thank for the reply. I did just that and after installing Renegade with kernel version 8, three times, the phone is up and running. Really appreciate the help.
Click to expand...
Click to collapse
, NP glad I could help.

no roms install on my s6 edge after forget to copy rooms file into TWRP
1619415 said:
, NP glad I could help.
Click to expand...
Click to collapse
now my phone in download " blue screen " mode
please someone help me :crying:

billyfatra said:
now my phone in download " blue screen " mode
please someone help me :crying:
Click to expand...
Click to collapse
You should be able to use odin on your PC tp send an image to your phone.
Lookup, for example, how to root your phone in these threads.
Sent from my SM-G920P using Tapatalk