Develop Bugs

CWM Not Work

hmmm, i have weird problem here, i just installed CWM 6.0.2.8 on my phone, in first using it working perceftly but then it doesn't work, please help me solve this problem, it's very annoying
or can somebody give me link the latest flashable CWM for ace 2
thanks before
thanks button awaiting

dv6661 said:
hmmm, i have weird problem here, i just installed CWM 6.0.2.8 on my phone, in first using it working perceftly but then it doesn't work, please help me solve this problem, it's very annoying
or can somebody give me link the latest flashable CWM for ace 2
thanks before
thanks button awaiting
Click to expand...
Click to collapse
What problem?
Sent from my GT-I8160 using Tapatalk

teddytsen said:
What problem?
Sent from my GT-I8160 using Tapatalk
Click to expand...
Click to collapse
the problem is " CWM is not working after first flashing"
can you give me the link of latest flashable CWM for galaxy Ace 2, please
thanks before

The CWM you flashed is a temporary one.
When you restart the phone into recovery, it goes into the original Samsung recovery, right? If so, then just re-flash the CWM. You'll need to do this every time to go into CWM.

qyx said:
The CWM you flashed is a temporary one.
When you restart the phone into recovery, it goes into the original Samsung recovery, right? If so, then just re-flash the CWM. You'll need to do this every time to go into CWM.
Click to expand...
Click to collapse
yeah i'm know that, but when im enter CWM not loaded, what version do you use ? give me please

I use the one from here: http://forum.xda-developers.com/showthread.php?t=2141395
(that thread says version 6.0.2.8, but when I run it it says 6.0.4.5)
I do not understand what you mean by "when im enter CWM not loaded". You need to flash the zip every time you want to run CWM, like you did the first time - somebody should correct me if I'm wrong.

qyx said:
I use the one from here: http://forum.xda-developers.com/showthread.php?t=2141395
(that thread says version 6.0.2.8, but when I run it it says 6.0.4.5)
I do not understand what you mean by "when im enter CWM not loaded". You need to flash the zip every time you want to run CWM, like you did the first time - somebody should correct me if I'm wrong.
Click to expand...
Click to collapse
okay i'll try it later
thanks for try to help , problem is when im get in to samsung recovery and flash temporary CWM recovery, it won't loaded, just black screen and then my phone restart.

what ROM do you use ?
when I was in stock MF1 I installed 6.0.2.8 (Shaaan thread, TY BTW) and it was temporary.
Then I flashed CM10.2 which installed me a new version of CWM (6.0.4.6) which is now persistent.
Can you develop a little bit more about your software configuration please ? ROM ? kernel ?

I have a similar problem. After i flashed cm 10.1 recovery dissapeared. I don't have cwm neither stock recovery. Any way to flash it via odin?

manthes said:
I have a similar problem. After i flashed cm 10.1 recovery dissapeared. I don't have cwm neither stock recovery. Any way to flash it via odin?
Click to expand...
Click to collapse
backup
flash stock via odin
flash cm10.1/gapps
try again see if recovery is there :/

i know this solution but i can't do the same thing every time i loose cwm because it worked before. Thats why i asked if it is possible to flash only cwm

manthes said:
i know this solution but i can't do the same thing every time i loose cwm because it worked before. Thats why i asked if it is possible to flash only cwm
Click to expand...
Click to collapse
no cwm odin flashable for us, sorry

The problem is with custom roms and my screen driver s6d.
Unfortunately only with stock rom everything is working fine

[Q] help with recovery

I am sorry about the noobness but i cant seem to find a proper thread for recovery setup.
I installed ROM Manager and then the CWM recovery from there.
But if i try to root into recovery I get a " android with a exclamation mark" - so assumes i messed something up ?
only way is to power cycle the device .
Can anyone here please help how i install CWM as i want to flas CM 11

mshenoy4573 said:
I am sorry about the noobness but i cant seem to find a proper thread for recovery setup.
I installed ROM Manager and then the CWM recovery from there.
But if i try to root into recovery I get a " android with a exclamation mark" - so assumes i messed something up ?
only way is to power cycle the device .
Can anyone here please help how i install CWM as i want to flas CM 11
Click to expand...
Click to collapse
Have you tried going back to freegee and installing cmw there?

I used freegee.......it works...but couldn't get philz to work.. Its all good though 6.0.4.7 I think it is works fine for me so far
*2SHAYNEZ*KCCO*E980*

Yes guys. Thank you for the help.
Tried freegee and I got CWM to work finally pheww.
Now I have backup and just installed CM11 nightly
Thank you so much
Sent from my LG-E980 using xda app-developers app

shayneflashindaily said:
I used freegee.......it works...but couldn't get philz to work.. Its all good though 6.0.4.7 I think it is works fine for me so far
*2SHAYNEZ*KCCO*E980*
Click to expand...
Click to collapse
How were you able to make flashing custom roms work using freegee? I successfully rooted my Optimus G Pro and used freegee to install CWM recovery 6.0.4.7, but everytime I try to flash a custom rom - the phone would reboot after 10 -15 seconds. I followed and installed the custom roms accordingly to the instructions. Can you help me?

DraghanC said:
How were you able to make flashing custom roms work using freegee? I successfully rooted my Optimus G Pro and used freegee to install CWM recovery 6.0.4.7, but everytime I try to flash a custom rom - the phone would reboot after 10 -15 seconds. I followed and installed the custom roms accordingly to the instructions. Can you help me?
Click to expand...
Click to collapse
When you start the freegee app is there an option to "unlock" ?
also, are you able to use CWM otherwise? liks to make a nandroid backup and such ?

mshenoy4573 said:
When you start the freegee app is there an option to "unlock" ?
also, are you able to use CWM otherwise? liks to make a nandroid backup and such ?
Click to expand...
Click to collapse
There are two different versions of Freegee on the Playstore. One is the free version and One is the paid version. I used the free version and when I open the app to install CWM recovery I don't see the "unlock" option, so I think the "unlock" option is only available in the paid version. Also, when I used the free version of Freegee to install CWM recovery, I can make and restore my nandroid backup. Maybe I need to buy the paid version of Freegee??

no u don't need paid.
also I didn't have the unlock option and I was able to flash.
I would say try twrp.
also are u trying just 1 ROM or have to tried a couple. maybe do that

mshenoy4573 said:
no u don't need paid.
also I didn't have the unlock option and I was able to flash.
I would say try twrp.
also are u trying just 1 ROM or have to tried a couple. maybe do that
Click to expand...
Click to collapse
I already tried 3 different roms and they all turned out the same. Keep rebooting after 10 - 15 seconds. I might have to give twarp a try. thanks

Just wondering, what software version is your phone?
Sent from my LG-E980 using XDA Premium 4 mobile app

Check in CWM recovery, before you flash any of the ROM's that LOKI support is enabled, I think you can find it under Advanced and it says something like "Toggle LOKI support"
Erik

ricco333 said:
Check in CWM recovery, before you flash any of the ROM's that LOKI support is enabled, I think you can find it under Advanced and it says something like "Toggle LOKI support"
Erik
Click to expand...
Click to collapse
okay I will try that and see if it works.

ricco333 said:
Check in CWM recovery, before you flash any of the ROM's that LOKI support is enabled, I think you can find it under Advanced and it says something like "Toggle LOKI support"
Erik
Click to expand...
Click to collapse
do I enable Loki after the flash or before the flash? Because I enable loki in the advance option of CWM recovery after I flash a custom rom and the phone still reboots 10-15 seconds. I did all the normal wipes and stuff too. I'm thinking maybe its because of I'm the software version that I'm on which is E98010g.

He said "check before you flash any rom,that LOKI support is enabled"... You should carefully read instructions before you do anything or you will end with bricked device...
Sent from Tapatalk

mshenoy4573 said:
I am sorry about the noobness but i cant seem to find a proper thread for recovery setup.
I installed ROM Manager and then the CWM recovery from there.
But if i try to root into recovery I get a " android with a exclamation mark" - so assumes i messed something up ?
only way is to power cycle the device .
Can anyone here please help how i install CWM as i want to flas CM 11
Click to expand...
Click to collapse
i did this as well and somehow now i can only get into twrp however i cant flash anything...any direction on this? i cant find the file i need to put on the sd card and flash thru twrp...any help?

For some reason Rom manager cwm didn't work for me so I tried installing freegee from the play store and installing cwm from there.
Since freegee my cwm works fine and I was able to flash.
Have you given freegee a try ?
Sent from my LG-E980 using xda app-developers app

I'm having the same trouble with recovery. I was on SlimBean for several months and decided to flash a ROM from RadeonMaya, but it wouldn't boot, so I tried to restore my backup of Slim from CWM. It looked like it restored properly, but it wouldn't boot either. I finally reverted back to stock and rooted again, downloaded Freegee and tried to flash CWM. I booted into recovery to flash my Slim backup, but I got an "error loki-ifying the boot image". I tried Phil's recovery, but couldn't boot back into recovery from CWM
Since then, I have not been able to flash anything, and have reverted back to stock probably a dozen times. I've tried TWRP, but can't flash a version that works on 4.1.2. I'm beyond frustrated at this point. I had fun flashing on this phone until these problems showed up, now I'm just going to try to like the stock ROM and hope we get an update to KitKat.

Just a quick question guys. What does freegee's "unlock" feature do? I ask because I don't get that option in Freegee either. Is it supposed to network unlock your phone or? Also, what is the need for the unlock?

[Q] Problem with flashing a ROM

Hello Everyone:
I'm having a problem flashing a ROM. I'm currently on CM 11 from the N7105 forum but would like to revert back to 4.3. I'm trying to flash Skynote Air, the vanilla version. I follow the steps provided and when I try to install the zip, im being given a system 7 error and an error on the zip file. I'm using philz touch CWM by the way. Is it because im on CM11 from the N7105 or is it the zip file? When trying to download the zip file from the ROM thread, it was coming up blank and I downloaded a mirrior. Before the CM11, I was running seanzscreams Sky Note 4.3. Any and all help would be greatly appreciated.

Jestic said:
Hello Everyone:
I'm having a problem flashing a ROM. I'm currently on CM 11 from the N7105 forum but would like to revert back to 4.3. I'm trying to flash Skynote Air, the vanilla version. I follow the steps provided and when I try to install the zip, im being given a system 7 error and an error on the zip file. I'm using philz touch CWM by the way. Is it because im on CM11 from the N7105 or is it the zip file? When trying to download the zip file from the ROM thread, it was coming up blank and I downloaded a mirrior. Before the CM11, I was running seanzscreams Sky Note 4.3. Any and all help would be greatly appreciated.
Click to expand...
Click to collapse
Are you using 5.15 version of Philz ? If so, try updating it.

dicksteele said:
Are you using 5.15 version of Philz ? If so, try updating it.
Click to expand...
Click to collapse
I'm using the 6.19.3 t0lteatt version.

Jestic said:
I'm using the 6.19.3 t0lteatt version.
Click to expand...
Click to collapse
Ahhhh.. Sorry I read but didn't read. Long day.
I read it again and saw the failed downloads.
A hosed zip is probably the case.
Go here
http://forum.xda-developers.com/showthread.php?t=2589891
Try getting back to just 4.3

dicksteele said:
Ahhhh.. Sorry I read but didn't read. Long day.
I read it again and saw the failed downloads.
A hosed zip is probably the case.
Go here
http://forum.xda-developers.com/showthread.php?t=2589891
Try getting back to just 4.3
Click to expand...
Click to collapse
I wonder if anyone has a working zip then.

Jestic said:
I wonder if anyone has a working zip then.
Click to expand...
Click to collapse
Did you download from the copy.com or skynote.com?
I'm grabbing off of the Skynote.com.. Pulling Sky_Note Air Vanilla F1.zip with no problems.. Still have 5 minutes to download.
I'll know if 15 minutes if it's good.

dicksteele said:
Did you download from the copy.com or skynote.com?
I'm grabbing off of the Skynote.com.. Pulling Sky_Note Air Vanilla F1.zip with no problems.. Still have 5 minutes to download.
I'll know if 15 minutes if it's good.
Click to expand...
Click to collapse
Im getting the rom from here :
http://skynote.camattin.com/)?
It downloads with no problem. The problem is when I try to install it from recovery.

Jestic said:
Im getting the rom from here :
http://skynote.camattin.com/)?
Click to expand...
Click to collapse
Same place I just downloaded from.. Copying to phone, flashing in 5.
Only difference is I'm using TWRP as my custom recovery.
Only because personal preference... My fat fingers press buttons on Philz by mistake. I hit reboot 80% of the time before I even do anything.
EDIT: I had a copy of Philz on my phone, philz_touch_6.07.9-t0lteatt.zip. My download flashed fine.
I gotta hit the sack... Good luck
http://www.androidfilehost.com/?fid=23329332407583259
Here's what I used

dicksteele said:
Same place I just downloaded from.. Copying to phone, flashing in 5.
Only difference is I'm using TWRP as my custom recovery.
Only because personal preference... My fat fingers press buttons on Philz by mistake. I hit reboot 80% of the time before I even do anything.
EDIT: I had a copy of Philz on my phone, philz_touch_6.07.9-t0lteatt.zip. My download flashed fine.
I gotta hit the sack... Good luck
Click to expand...
Click to collapse
Interesting. Thanks for the help.

Jestic said:
Interesting. Thanks for the help.
Click to expand...
Click to collapse
http://www.androidfilehost.com/?fid=23329332407583259
Here's what I used

See my post #2361 in seanZscreams SkyNoteAir thread here: http://forum.xda-developers.com/showthread.php?p=50682717
I had same Status 7 error. In PhilZ Touch Recovery ( in version 6.19.3 which is actually 6.19.2) in Install menu, make sure you UNCHECK "Don't allow old binary update" then flash rom. You may have a corrupt data partition (I did). If so, you'll have to wipe /data/media partition. Read my post and reference links. Has to do with the change from CWM base 6045 to 6047 .

DoctorQMM said:
See my post #2361 in seanZscreams SkyNoteAir thread here: http://forum.xda-developers.com/showthread.php?p=50682717
I had same Status 7 error. In PhilZ Touch Recovery ( in version 6.19.3 which is actually 6.19.2) in Install menu, make sure you UNCHECK "Don't allow old binary update" then flash rom. You may have a corrupt data partition (I did). If so, you'll have to wipe /data/media partition. Read my post and reference links. Has to do with the change from CWM base 6045 to 6047 .
Click to expand...
Click to collapse
Thanks for the help. I just installed the latest TWRP and it flashed fine. Thanks.

Jestic said:
Thanks for the help. I just installed the latest TWRP and it flashed fine. Thanks.
Click to expand...
Click to collapse
Glad you're back up and running. .. btw, PhilZ just posted an updated CWM Touch Recovery [6.25.0] for our Note2 [t0lteatt device tree] which now automatically determines if what you're flashing has older binary code embedded in its binary-script to avoid the dreaded Status7 errors.

[Q] Root for SM-P605 kitkat

Hey
I been looking in the forums, but I havent be able to finde if there is a root for kitkat.
Do anyone know if that is one and if so, can you plz link to the thread
Thaning you in advance

Yes: http://autoroot.chainfire.eu
Although I have a p600 and his method worked fine for JB and KK.

Don't use the P6700/601 cf-autoroot on your P605. It will brick it...
The old cf-autoroot is for JB and doesn't work on KK...
Go to the Original developement thread and look at the TWRP 2.7.0.1 thread. It will supply answers and links...

ultramag69 said:
Don't use the P6700/601 cf-autoroot on your P605. It will brick it...
The old cf-autoroot is for JB and doesn't work on KK...
Go to the Original developement thread and look at the TWRP 2.7.0.1 thread. It will supply answers and links...
Click to expand...
Click to collapse
Hi,
TWRP 2.7.0.1 not work to P605XXUCNE2 !!!
What recovery works?
@+
Pyrana

Root p605kitkat 4.4.2
Hi All, hope I'm posting this is the right forum .Im quite a beginner in Android terms so please be patient with me ...
I have a Galaxy Note 10.1 2014 sm-p605 and use it while travelling , i dont have a computer with me most of the time so i rely on the tablet for most of what i do , yesterday i have updated to android 4.4.2 kitkat , whitout knowing i would loose full access to my 32 Gb SD card...well that made me quite furious as most people...so i decided try rooting it , after backing up all my files i used CF Auto Root ( CF-Auto-Root-lt03lte-lt03ltexx-smp605.zip , well that didnt quite work as i was getting
the boot loopwith the message RECOVERY IS NOT SEANDROID ENFORCING, after much reading i was able to recover the tablet to boot back , no rooting was done but im pretty sure i triggered knox and voided the warranty ....anyway i still want to try getting full access to my SD card, either by rooting it or any other way ,if there is a valid file explorer app without root i am keen to know, or if anyone can show me the way to root this device I will really appreciate.Device Details:
AP605ZSUCNE3
CP: P605ZSUCNE1
csc605OZSUCNE3
KitKat 4.4.2

With all do respect TWRP 2.7.0.1 does work on 4.4.2
I have it working myself.
Now To gain root on 4.4.2, install Autoroot - Chainfire for the SM P905
Then search the forums for a P605 recovery (Its somewhere here)
Youll get full root with original stock recovery. Then flash TWRP 2.7.0.1 and then youll be fine.
Remember the current TWRP version on the main post isnt the correct version...Further into the thread there is the correct version.
Need any help. as per always im on Facebook and Am happy to teamviewer in

fkofilee said:
With all do respect TWRP 2.7.0.1 does work on 4.4.2
I have it working myself.
Now To gain root on 4.4.2, install Autoroot - Chainfire for the SM P905
Then search the forums for a P605 recovery (Its somewhere here)
Youll get full root with original stock recovery. Then flash TWRP 2.7.0.1 and then youll be fine.
Remember the current TWRP version on the main post isnt the correct version...Further into the thread there is the correct version.
Need any help. as per always im on Facebook and Am happy to teamviewer in
Click to expand...
Click to collapse
No need to flash auto root for P905 just flash supersu from recovery TWRP 2.7.0.1 WORKS on 4.4.2!!!!

alex_72gr said:
No need to flash auto root for P905 just flash supersu from recovery TWRP 2.7.0.1 WORKS on 4.4.2!!!!
Click to expand...
Click to collapse
Hi,
Test TWRP 2.7.0.1 and no found !! to Kitkat
Big problem screen fully striped and very difficult to restore! And autoroot is a disaster!

Alan-B said:
Hi,
Test TWRP 2.7.0.1 and no found !! to Kitkat
Big problem screen fully striped and very difficult to restore! And autoroot is a disaster!
Click to expand...
Click to collapse
Mate, you were told cf-autoroot DOESN'T work and will screw things up... Why did you flash over something not working right?
You needed to find the stock recovery first, then flash 2.7.0.1 (not 2.7.0.0) to get TWRP installed. You then flash latest supersu using TWRP. This will root your device and give you a custom recovery..
The only thing is TWRP can't make a backup to the External sd card if you have it formatted exFAT...
Best advice, flash stock rom (kitkat only) again using PC ODIN, try again...

ultramag69 said:
Mate, you were told cf-autoroot DOESN'T work and will screw things up... Why did you flash over something not working right?
You needed to find the stock recovery first, then flash 2.7.0.1 (not 2.7.0.0) to get TWRP installed. You then flash latest supersu using TWRP. This will root your device and give you a custom recovery..
The only thing is TWRP can't make a backup to the External sd card if you have it formatted exFAT...
Click to expand...
Click to collapse
Yep, autoroot for P605 hasnt been updated yet to 4.4.2
Yes you can flash twrp and then SU , I came from the full firmware reflash... I t was the only way to put root on at the time.

Alan-B said:
Hi,
Test TWRP 2.7.0.1 and no found !! to Kitkat
Big problem screen fully striped and very difficult to restore! And autoroot is a disaster!
Click to expand...
Click to collapse
You can follow those links to get what you need.
http://forum.xda-developers.com/showpost.php?p=53236030&postcount=19

alex_72gr said:
You can follow those links to get what you need.
http://forum.xda-developers.com/showpost.php?p=53236030&postcount=19
Click to expand...
Click to collapse
Hi,
Having installed TWRP 2.7.0.1 on P605XXUCNE2 everything planted me! over the boot rom recovery mode and more !!!!
I spent two hours to get to switch back download.J 'thought my Note2 LTE 2014 was dead!
Sorry for the translation, I'm French

Alan-B said:
Hi,
Test TWRP 2.7.0.1 and no found !! to Kitkat
Big problem screen fully striped and very difficult to restore! And autoroot is a disaster!
Click to expand...
Click to collapse
0. If you screwed something up, flashed a wrong recovery, flash the stock rom again. If you are stuck in a boot loop, there is plenty of thread about how to boot into odin mode from there.
1. Download attached TWRP 2.7.0.1, it works with P605. I have it myself.
2. Start the tablet, download SuperSU-v1.99r4.zip, place on SD Card.
3. Reboot into Odin mode, (VolDown+Home), flash TWRP. If your recovery is being restored, don't tick Auto Reboot in Odin and turn off manually after flashing, then boot into TWRP.
4. Boot into TWRP, reset to factory settings. You will be asked if you want Root at some point. I think it's when you reboot, I don't remember.
5. When booted into Android, see if SuperSU downloader app is there. If no - boot TWRP and look around, because you missed something.
If yes, reboot into TWRP again and flash UPDATE-SuperSU-v1.99r4.zip.
Congrats, you are now rooted.

xda_user_p600 said:
0. If you screwed something up, flashed a wrong recovery, flash the stock rom again. If you are stuck in a boot loop, there is plenty of thread about how to boot into odin mode from there.
1. Download attached TWRP 2.7.0.1, it works with P605. I have it myself.
2. Start the tablet, download SuperSU-v1.99r4.zip, place on SD Card.
3. Reboot into Odin mode, (VolDown+Home), flash TWRP. If your recovery is being restored, don't tick Auto Reboot in Odin and turn off manually after flashing, then boot into TWRP.
4. Boot into TWRP, reset to factory settings. You will be asked if you want Root at some point. I think it's when you reboot, I don't remember.
5. When booted into Android, see if SuperSU downloader app is there. If no - boot TWRP and look around, because you missed something.
If yes, reboot into TWRP again and flash UPDATE-SuperSU-v1.99r4.zip.
Congrats, you are now rooted.
Click to expand...
Click to collapse
Re hello,
he problem is that just after the flash TWRP nothing boot! or recovery (zebra screen) and reboot loop and very difficult to switch back to download due to the reboot loop!
Just TWRP 2.7.0.0 works with Version 4.3 Note: The 2.7.0.1 works with 4.3 rom or not ? just to test !
Thank you for the helps

Alan-B said:
Re hello,
he problem is that just after the flash TWRP nothing boot! or recovery (zebra screen) and reboot loop and very difficult to switch back to download due to the reboot loop!
Just TWRP 2.7.0.0 works with Version 4.3 Note: The 2.7.0.1 works with 4.3 rom or not ? just to test !
Thank you for the helps
Click to expand...
Click to collapse
Attached version works with 4.4.2 Nordic.
After you flashed wrong recovery and have "zebra screen", Make sure you flashed stock firmware after that. Don't try flashing anything else before you flash stock.

xda_user_p600 said:
Attached version works with 4.4.2 Nordic.
After you flashed wrong recovery and have "zebra screen", Make sure you flashed stock firmware after that. Don't try flashing anything else before you flash stock.
Click to expand...
Click to collapse
re...
I just tested a flash TWRP from your link, but it boot and stuck on the TAB 10.1 lte logo

Mate, flash Kitkat rom 1st then flash TWRP... Doing anything else is gonna get you in trouble...
2.7.0.1 TWRP has Kitkat recovery, not Jellybean so you will have issues if you flash on a Jellybean rom...

ultramag69 said:
Mate, flash Kitkat rom 1st then flash TWRP... Doing anything else is gonna get you in trouble...
2.7.0.1 TWRP has Kitkat recovery, not Jellybean so you will have issues if you flash on a Jellybean rom...
Click to expand...
Click to collapse
Re hello, and always attempts to boot and TWRP stuck on 10.1 NOTE and the red and blue lines jaune.testé logo with flash P605XXUCNE2_P605OXACNE2_P605XXUCNE2_HOME.tarre, boot in download mod and flash TWRP without reboot, then reboot manual recovery (stuck) Same with auto reboot and there is nothing not to have the display of recovery!

I understand you. Are you sure you're not missing anything? It might help to flash stock NEE again. In my case I ticked "Update boot loader", do you mind trying that?
Remember, TWRP is VolUp+Home. It should display colored text in the right upper corner on 2014 logo when booting, if it's entering recovery mode.

Hi,
Solved it is Ok....
Thanks

Stuck after Install Rom

Hello to everyone ,
i installed miui v6 to my M8 and after that i cant flash any other rom.
I install a new rom from zip but after the reboot it stucks on the first screen of the new rom.
Waited for 3 hours but nothing.
What do you suggest ?

alexis333 said:
Hello to everyone ,
i installed miui v6 to my M8 and after that i cant flash any other rom.
I install a new rom from zip but after the reboot it stucks on the first screen of the new rom.
Waited for 3 hours but nothing.
What do you suggest ?
Click to expand...
Click to collapse
simple question, do you flashed the boot.img inside the rom using fastboot?(fastboot flash boot boot.img)

Simple answer.
No.
Now what ?

Husky34 said:
simple question, do you flashed the boot.img inside the rom using fastboot?(fastboot flash boot boot.img)
Click to expand...
Click to collapse
This isn't normally required on the M8, unless its some quirk specific to MIUI (which is a ROM I don't a have much knowledge of).
Make sure your TWRP version is up to date.
Make sure your hboot is up to date.
Wipe user data and cache (default wipe in TWRP) before flashing the ROM.
Those are the most common reasons for no boot after flashing multiple ROMs.

I dont use TWRP. I use Philz Touch recovery.
Where can i download latest TWRP ?

alexis333 said:
I dont use TWRP. I use Philz Touch recovery.
Where can i download latest TWRP ?
Click to expand...
Click to collapse
That may be the issue right there. I know some folks are still using it, but Philz hasn't been updated in a long time. And since some newer ROMs have issues with older TWRP builds, I would assume the same would be true with Philz.
You can get TWRP here: https://dl.twrp.me/m8/

alexis333 said:
I dont use TWRP. I use Philz Touch recovery.
Where can i download latest TWRP ?
Click to expand...
Click to collapse
https://twrp.me/devices/htconem8gsm.html

I flashed TPWR and then flashed the new ROM and everything ok.
Thanx for your help men ..

alexis333 said:
Thanx for your help men ..
Click to expand...
Click to collapse
There's a button for that.
Happy it worked for you.