Device no longer boots or responds. Please help? - G Pad 8.3 Q&A, Help & Troubleshooting

Here's what I did:
Had everything running fine with twrp installed and rooted.
Booted into twrp.
Wiped cache system and dalvik.
Restart.
Device wouldn't boot or go to recovery.
Attempt to follow THIS
Process fails.
Unplug device as instructions say.
Device battery dies.
Device will no longer boot into anything, including download mode.
Help?

cyrushehe said:
Here's what I did:
Had everything running fine with twrp installed and rooted.
Booted into twrp.
Wiped cache system and dalvik.
Restart.
Device wouldn't boot or go to recovery.
Attempt to follow THIS
Process fails.
Unplug device as instructions say.
Device battery dies.
Device will no longer boot into anything, including download mode.
Help?
Click to expand...
Click to collapse
Make sure your device is fully charged and turned off.
Simultaneously press and hold the power and volume down buttons.
When the LG logo shows up, release the power button only.
Now press and hold the power and volume up button while keeping your hold on the volume down button.
When the factory reset screen appears, release your hold on all buttons.
Press the power button to continue.
Press the power button again to confirm if you’re sure you wish to continue with the reset.

meanoc said:
Make sure your device is fully charged and turned off.
Simultaneously press and hold the power and volume down buttons.
When the LG logo shows up, release the power button only.
Now press and hold the power and volume up button while keeping your hold on the volume down button.
When the factory reset screen appears, release your hold on all buttons.
Press the power button to continue.
Press the power button again to confirm if you’re sure you wish to continue with the reset.
Click to expand...
Click to collapse
Hello, same thing happened to me yesterday night. I'm waiting for help... I can't even turn off the tab...

ruimiguel98 said:
Hello, same thing happened to me yesterday night. I'm waiting for help... I can't even turn off the tab...
Click to expand...
Click to collapse
Try holding down the power button for like 30 seconds.

Related

Stuck at Google logo after update

I just got my Nexus 7 an hour ago, once i setup with my google account then it asked me to install an update (apparently it says 4.3 update) so I let it do its job and left it there. Now it's stuck on Google logo for quite some time. This is weird for me since I didn't root or flash anything to it yet. Anyone facing the same problem?
EDIT: apparently it got to the X screen after i hold the power button and turn it on again. this is strange...the update shouldnt cause something like this to scare new users lol.
Hold down the power button 30-60 seconds until it reboots again. See if it goes through.
If not, boot into recovery and factory reset.
Power down tablet, Power+VolUp until you see Google, release buttons.
You'll see fallen android, in this exact sequence, Press and Hold Power, then press/release VolUp, then release Power.
You'll see a menu, press VolDown to scroll to wipe data factory reset. Press Power to select.
When it is done, Reboot should be selected, Press Power to select reboot.
sfhub said:
Power down tablet, Power+VolUp until you see Google, release buttons.
You'll see fallen android, in this exact sequence, Press and Hold Power, then press/release VolUp, then release Power.
You'll see a menu, press VolDown to scroll to wipe data factory reset. Press Power to select.
When it is done, Reboot should be selected, Press Power to select reboot.
Click to expand...
Click to collapse
Thank you very much, you said it very clearly, now my soft-bricked Nexus 7 flo works again:good::good::good::good::good:

[Q] Stuck logo LG and can not hard reset ?

hi all.
My LG optimus G F180S Korea version can't start, it get stuck at logo LG. I have already read about this error: "stuck at logo LG", the aswear is use hard reset, but I can not hard reset my phone by press Down volume and Power button
Can anyone help me solve problem?
thanks in advance!
Make sure your phone is turn off. If u not sure, press Power about 10s. After, Pressing Volume - and Power. Goodluck.
phamluong92 said:
Make sure your phone is turn off. If u not sure, press Power about 10s. After, Pressing Volume - and Power. Goodluck.
Click to expand...
Click to collapse
unluckily, I can not hard reset by pressing volume down and power
DO U have another method?
thanks!
for hard reset on stock cwm : turn phone off. press vol up + vol down + power.
I had the same problem. I even got worse and the phone wouldn't even turn on. So what worked for me is this:
I put the phone in download mode (Vol Up + Vol Down and then plug the usb)
After that I open LG Mobile Support tool. http://csmg.lgmobile.com:9002/client/app/B2CAppSetup.exe
Wait for the program to detect the phone then go to Options-> Upgrade Recovery. Wait for the process to finish.
After it finished the phone loaded normally and everything was intact. All my files and apps were untouched.

[Help] My phone is hard brick

so reason, i'm delete file build.prop. my phone is hard brick. i press power + volume up it turn on logo htc and off. i press power + volume down. nothing happen and when i charge baterry. no charge. help me
Kent21 said:
so reason, i'm delete file build.prop. my phone is hard brick. i press power + volume up it turn on logo htc and off. i press power + volume down. nothing happen and when i charge baterry. no charge. help me
Click to expand...
Click to collapse
1. Unplug phone - VERY important
2. power on phone, doesn't matter if it is boot looping or whatever
3. hold vol up and power EXACTLY 10 seconds
4. let go of both
5. hold vol down and power till boot loader comes up.
You have no charge because you are running an old ver of twrp, get 2.7.1.0
an0ther said:
1. Unplug phone - VERY important
2. power on phone, doesn't matter if it is boot looping or whatever
3. hold vol up and power EXACTLY 10 seconds
4. let go of both
5. hold vol down and power till boot loader comes up.
You have no charge because you are running an old ver of twrp, get 2.7.1.0
Click to expand...
Click to collapse
hold vol up and power EXACTLY 10 seconds
tks for your help. i'm press 30s. my phone is rescure
Share how I fixed my HTC M8 with the same problem.
Hi,
I just want to share how I fixed my HTC M8 with the same issue. The method is the same but a bit different. I found the solution from googling the below link:
http://forum.xda-developers.com/htc...ter-download-mode-t2853100/page2#post62490577
The essential method is to keep holding down the power button and don't let it go while pressing on the volume up button to reset. At the very moment before the phone resets and shows the HTC logo white screen, switch from pressing the volume up button to the volume down button while holding down the power button. Or you can count 10 seconds and switch before the screen resets.
I hope this helps other people with the same issue.
an0ther said:
1. Unplug phone - VERY important
2. power on phone, doesn't matter if it is boot looping or whatever
3. hold vol up and power EXACTLY 10 seconds
4. let go of both
5. hold vol down and power till boot loader comes up.
You have no charge because you are running an old ver of twrp, get 2.7.1.0
Click to expand...
Click to collapse
Thanks, the pwr + vol-up 10 seconds before the phone hard resets, them pwr + vol-down got me back into hboot and recovery and then out of a build.prop issue.
I have no idea why this is a thing: Getting into the boot loader is usually easy. I can't imagine why when the system doesn't boot normally that the standard procedure to enter hboot changes.
regardless of retarded engineering on qualcom or htc's part, thank you an0ther.

F400S Dead end

Hi,
how are u all i hope you are fine.
to start with i have root the phone by the application stump , and flash a twrp by flashiy.
the phone report and the recovery was working fine i have done the advance wipe and repot the phone.
Now its jammed on the booting with lg logo , nothing is working no download mode and no recovery .
the phone even is it loading up to do it with fast boot. i have tried everything i press all the button a Korean screen will shows tried the options repot and stuck again.
nasser789 said:
Hi,
how are u all i hope you are fine.
to start with i have root the phone by the application stump , and flash a twrp by flashiy.
the phone report and the recovery was working fine i have done the advance wipe and repot the phone.
Now its jammed on the booting with lg logo , nothing is working no download mode and no recovery .
the phone even is it loading up to do it with fast boot. i have tried everything i press all the button a Korean screen will shows tried the options repot and stuck again.
Click to expand...
Click to collapse
Shut the phone down. then remove the battery and wait 20 seconds and reinsert it. Then try to get into recovery (look here for how to http://www.android.gs/enter-recovery-mode-lg-g3/) mode and see if the phone is recognised by the computer if you connect it. Then do a data factory reset in recovery.
Turn off your phone – you can press power button once for selecting “power off” or you can press and hold the power key for about 5 or 6 seconds.
Now, press and hold Power and Volume down buttons at the same time.
When the LG logo appears, release the keys.
Immediately press Power and Volume Down buttons again until the Hard Reset menu will be displayed.
Press Power button once and confirm the hard reset operation (this will not be necessarily if your LG G3 is running on a custom recovery image).
That’s it; now your LG G3 will boot into recovery mode.
gee2012 said:
Shut the phone down. then remove the battery and wait 20 seconds and reinsert it. Then try to get into recovery (look here for how to [ mode and see if the phone is recognised by the computer if you connect it. Then do a data factory reset in recovery.
Turn off your phone – you can press power button once for selecting “power off” or you can press and hold the power key for about 5 or 6 seconds.
Now, press and hold Power and Volume down buttons at the same time.
When the LG logo appears, release the keys.
Immediately press Power and Volume Down buttons again until the Hard Reset menu will be displayed.
Press Power button once and confirm the hard reset operation (this will not be necessarily if your LG G3 is running on a custom recovery image).
That’s it; now your LG G3 will boot into recovery mode.
Click to expand...
Click to collapse
thank you very much for your response.
i tried it same problem stuck in booting the phone lg logo. i tried to put in the download mode the phone stuck on lg logo.
the only response from the phone is when i press the whole buttons and it take me to a koren menu showing imei.

How to reliably start TWRP

I have TWRP installed, and have managed to run it a few times. Now I cannot start TWRP at all.
From off, if I switch on, the following happens:
1) Screen with Samsung Galaxy A70 - Secured by Knox
2) 0.5 seconds later another screen, "this phone's bootloader is unlocked and it software integrity. .." and "press power key to continue..."
3) 5 seconds later, same screen as (1)
4) 3 seconds later, red letters "this phone is not running Samsung's official software"
5) 3 seconds later blank screen with "samsung" and then booting to android.
In my experience I have to flash twrp every time I want to use it( I don't know the reason but I couldn't fix it ) , for booting twrp on the other hand I turn off the phone first, then I press power button+volume down until the "this phones bootloader..." screen appears, here is the tricky part, you have to quickly let go of these two buttons, press power button, let go of the power button (after the warning disappeared) and then press volume down button (and hold it) until twrp logo appears, this happens really fast so you may need to do it a few times to get used to it.
mobin22 said:
In my experience I have to flash twrp every time I want to use it( I don't know the reason but I couldn't fix it )
Click to expand...
Click to collapse
Yes, same here, the only time I have managed to run TWRP on this phone, is right after a flash.
mobin22 said:
and then press power down button
Click to expand...
Click to collapse
Do you mean volume down?
Zilliman said:
Yes, same here, the only time I have managed to run TWRP on this phone, is right after a flash.
Do you mean volume down?
Click to expand...
Click to collapse
Power off the device, plug into a pc, wait for it to start charge, hold vol up and power till it turns on. Wala boots to twrp. If you have magisk installed,you can use the reboot option within magisk.
mobin22 said:
In my experience I have to flash twrp every time I want to use it( I don't know the reason but I couldn't fix it ) , for booting twrp on the other hand I turn off the phone first, then I press power button+volume down until the "this phones bootloader..." screen appears, here is the tricky part, you have to quickly let go of these two buttons, press power button, let go of the power button (after the warning disappeared) and then press volume down button (and hold it) until twrp logo appears, this happens really fast so you may need to do it a few times to get used to it.
Click to expand...
Click to collapse
Samsung changed how to enter recovery on Android 11. Power off device, plug into pc, wait for it to charge, then hold vol up and power till it turns on. Alternatively, if you have magisk installed, use the reboot options within magisk.
I did that. Thanks!
But it has gone to:
Android Recovery
Samsung /a70qxx/a70q
11/RP1A.200720.012./A705FNXXUB5DVB3
user/release-keys
Use volume up/down and power.
Reboot system now
Reboot to bootloader
Apply update from ADB
Apply update from SD card
Wipe date/factory reset
...
...
...
Where is TWRP? It seems it's gone.
Zilliman said:
I did that. Thanks!
But it has gone to:
Android Recovery
Samsung /a70qxx/a70q
11/RP1A.200720.012./A705FNXXUB5DVB3
user/release-keys
Use volume up/down and power.
Reboot system now
Reboot to bootloader
Apply update from ADB
Apply update from SD card
Wipe date/factory reset
...
...
...
Where is TWRP? It seems it's gone.
Click to expand...
Click to collapse
That's because you're not installing it properly go back to my guide and follow it exactly and stop listening to these other people. I've been modding this device since it first came out with Android 9, I know every inch of this device. You're getting confused by what other people are telling you
MarvinMod said:
5- Press and hold vol down and power till the screen turns blank then immediately press and hold vol up. The device will reboot then land you in the twrp splash screen
Click to expand...
Click to collapse
It fails here, on this step. After successful flash of recovery.tar, power + vol down to reboot, cable still connected, nothing you can do now can bring TWRP up. The phone boots into Android.
EDIT: I think I have now got it. I will update in a few mins.
Zilliman said:
It fails here, on this step. After successful flash of recovery.tar, power + vol down to reboot, cable still connected, nothing you can do now can bring TWRP up. The phone boots into Android.
EDIT: I think I have now got it. I will update in a few mins.
Click to expand...
Click to collapse
After successful flash of recovery.tar, power and vol down to reboot, as soon as the phone screen goes blank, immediately release all keys and press and hold vol up. Must be as soon as screen goes blank. The device will then reboot twice and land you in twrp splash screen. You must hit vol down and power after successful flash then when screen blanks, vol up. If you miss this step, twrp will not hold and revert back to stock recovery.
Here is the notes I made today:
****************************************************************
INSTALL + START TWRP
phone is off
press up + dn
insert cable
go into download (press up)
ODIN 3.14 + AP:tar(vbmeta.img+twrp.img), auto reboot off, press upload
when it succeeds, press dn + pwr until it reboots
then quickly up + pwr until it starts (no need to hold down)
this starts in TWRP
from powered off
press pwr button
goes into twrp or android(system) -- depending on what was used last time
if we used reboot->system last time it will now **Always** go into system!
to go back into twrp:
switch off
power cable until charge
pwr + up until it starts
****************************************************************
The above means that you CANNOT go back to TWRP unless you have a cable and a PC near by.

Categories

Resources