Related
hello
Yesterday, I tried to pass my rom faman 3.5 to another on the forum.
I didn't manage to establish the connection then I threw since the telephone the software trin unlock. The three-colored screen appeared.
I threw the rom update utility of the new rom and there that works.
Once to 100%, message of success and there, the remained telephone blocked on the logo htc to the starting, no button answers, inefficient hard-reset, obligated to take-off the battery.
I don't have a telephone anymore, help me!
thank you
I can access to boot loader by pressing power and camera touch.
Vista take a bip when i connect usb but i can't make another rom, error 260 or for anyone rom, just 1% of install and nothing.
hi
There is a post for the Roma oggi chanvi and that would tell you which version.
1 rom the small faman of 6.0 is
2 small Reflash your bootloader I'll crash council 9.99 Zack croft
you can find it on xda or trinity guide.
Password after your radio 1.56.70.11
and after bootloader still reflash the rom and there you veras everything is ok
Il y a un poste pour la rom chanvi et oggi se serait bien que tu dise quelle version .
Petit 1 la rom faman c'est du 6.0
Petit 2 Reflash ton bootloader je te conseil des crash 9.99 de zack croft
tu peut le trouver sur xda ou sur trinity guide .
Apres passe ta radio en 1.56.70.11
et apres toujours en bootloader reflash la rom et là tu veras tout est ok
Oggi
Team Chanvi and Oggi
Merci mais j'ai du le retourner au SAV en espérant qu'ils l'acceptent car je n'avais que ce téléphone.
Réponse dans deux semaines.
Je donnerai des news.
Friday, my phone come-back from sav and after a motherboard replacement by htc, no battery charge and no sim card detected. Return to htc for the second time with my congratulations.
Sorry for my poor english.
I've flashed my ipaq 514 with WM6.1 final (HP514[V1RC1L] from ifolder.ru)
but now it is bricked. When updating the process was slowly to 43% but then the progressbar has skip to 100% and device reboot.
After reboot i see only "No image exists !!" message.
Is this correctible or i have only brick which can i expose to waste?
ipaq blogsoft is respensable
I have the same probleme
Nobody helps ?
Nobody helps ?
ça fait deux jours que j'essais de resourdre le probleme sans aucune solution
je suis entrain d'avoir quelques idées dans ce lien
http://www.resco.net/forums/ShowPost.aspx?PostID=2804
sorry if the
text shown below is unreadable or with errors (thanks translate.google.com).
Malheureusement, ce n'est pour les fonctions PDA et les instructions de démarrage, mais 514 est un peu différente de la situation
back into my poor english:
In other words i don't know if this is applicable for IPAQ 514 and in post i've seen that device is alive (shows USB/Serial) but in this situation it seems no any interaction. I've tested to enter bootloader but with any of key combinations to enter bootloader mode , what i have found on the internet the operation was NOT successful.
no news at the moment
I find this text but i dont undrestand You just need the installed program DLLs.. what thos it meen
text :
RESOLUTION:
Use a Windows XP computer with active sync (4.5). Connection is not active, but this is no problem. You just need the installed program DLLs..
Connect the 514 to USB, it will show "connected to USB"
Start the upgrade...
If there is an error message "not found", stop the program and restart it.
Bios upgrade will start and after 2 minutes, the phone is running again...
Link : http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1197769
You need only dynamicaly linked libraries (DLL files) , you don't need full active sync , but this is not relevant to this.
In this case (from text that you find) is 514 alive and computer detects it, but in case what we need to solve (now minimaly for my ipaq) is problem in no communication. when i connect my 514 to my PC it does not found new hardware or do sounds like when you connect already known hardware. in other words PC does not recognize something on other end of the cable. And next problem is: author writes that ipaq or pc shows connected to usb but nothing seems to be applicable to this case.
I have the same probleme I've flashed my ipaq 514 with WM6.1 final (HP514[V1RC1L] from the Gost ifolder.ru)
but now it is bricked. When updating the process was slowly to 43% but then the progressbar has skip to 100% and device reboot.
After reboot i see only "No image exists !!" message.
I searching for resolution if I will have news I let it in forum
see you again
Solution!! - it worked for me
this has worked for me:
i assume that you have usb cable plugged into the pc
for english wm6 search hp SP38077
it must match your SKU ID (P/N) otherwise it says you have wrong version.my skuid is:FA908AA#ABB -> SP38077
i have windows vista installed and it works
1) take out the battery
2) remove USB cable if connected
3) insert battery
4) push and hold the silver center of the 4way key and press red phone key (switch on)
or see http://h20000.www2.hp.com/bizsuppor...=3375716&prodTypeId=215348&objectID=c01087938
this will make hard reset
5) computer now recognizes HP USB Sync
if no then remove battery
remove cable
insert battery again
then hold volume down (bottom part of the silver key on left side of phone)
and insert USB
now it will enter bootloader mode and if previosly not installed then now installs hp usb sync
now start HP Rom update utility with your preffered language (en or fr i dont know)
and it will connect to the phone and upgrade a firmware and voila phone is ALIVE !
Please post if you were successfull.
Alwase the same probleme
I make make hard reset with the first solution i see only "No image exists !!" message also whith the second solution and if i conect my device my pc not recognizes my device I'm very angry
there is a diference between HP USB Sync and Microsoft active sync
I dont understand what do you want to tell with HP USB Sync
I have Windows XP
Thank you for your help
Is that i must install Windows Vista
I wait or your help plase
Help me plase
IF I make make hard reset with the first solution i see only "No image exists !!" message also whith the second ; Are you see the message after you make hard reset ??
When I make hard reset with holding volume up and pressing red phone key (switch on) I have a black screen
Have you an idea palse
Think you
Nobody helps ?
i dont know if in XP shows HP USB Sync - but HP USB Sync is mode in which the device is visible for Rom Update Utility (almost in Vista) I will test it in VM
It so terrible with this communication it is so longly. Do you have an IM account (ICQ Skype MSN ?) If Yes then send me your number or nick in Private message and when i will be back to home (in 1 hour ) then we can test it online)
Think you my friend this is my ICQ Number or Email [email protected]
check your mailbox
Nobody helps ?
greeg said:
Sorry for my poor english.
I've flashed my ipaq 514 with WM6.1 final (HP514[V1RC1L] from ifolder.ru)
but now it is bricked. When updating the process was slowly to 43% but then the progressbar has skip to 100% and device reboot.
After reboot i see only "No image exists !!" message.
Is this correctible or i have only brick which can i expose to waste?
Click to expand...
Click to collapse
The same thing happened to me. Can anybody help out with this?
No image exists solucion
Buenas a todos, acabo de resolver el problema ayer:
1-lo primero que hay que hacer es quitar la bateria al movil y dejarlo asi unas cuantas horas o hasta el dia siguiente (a mi me funciono dejandolo hasta el dia siguiente)
2-en tu pc con windows xp, WINDOWS VISTA NO, repito WINDOWS VISTA NOO!!! instalar primero el microsoft active sync que viene en el cd de la caja
3-descargar e instalar el rom update para tu idioma de la misma pagina de hp
4-colocar nuevamente la bateria (despues de varias horas)
5-pulsar el boton de bajar volumen lateral y el de izquierda de control central y sin soltarlos conectar el usb al pc
6-ya no deberia aparecer no image exists, mas bien te aparece el mensaje de bootloader y que esta conectado via usb
7-iniciamos el room update que hemos descargado
8-luego de unos minutos el movil vuelve a estar operativo
aclaraciones:
-esto no funciona en windows vista y probablemente si pruebas actualizar ahora el wm6.1 si funcione, siempre y cuando la actualizacion la hagas desde un pc con windows xp (aun no lo he probado)
-tienes que dejar el movil sin la bateria varias horas ya que al principio lo probe sin hacerlo y no me funciono, solo funciono luego de dejarlo sin la bateria por varias horas
-para poder iniciar el room update que se descarga de la pagina de hp tienes que tener instalado antes el microsoft active sync que viene en la caja con el movil de lo contrario te dira que no encuentra un dll
-un dia lleve el movil a un servicio tecnico y me dijeron que no se podia reparar, me gustaria enseñarles tambien como se hace
suerte a todos
Salutare ! Rog cineva sa faca dump si sa posteze rom-ul cu care vine instalat orange spv m700 de la orange romania ! Multumesc anticipat ! Bogdan
waffen said:
Salutare ! Rog cineva sa faca dump si sa posteze rom-ul cu care vine instalat orange spv m700 de la orange romania ! Multumesc anticipat ! Bogdan
Click to expand...
Click to collapse
Pentru a intelege tota lumea eu zic sa scrii si in engleza, nu se stie nicio data.
Apropo de ce iti trebuie si cum se face acest dump?As dori sa-mi fac singur un rom, imi poti spune cum se face?Multumesc anticipat!Alex.
Salut ! ma adresam celor din reteaua orange romania ! Inainte sa fac mai multe up-grade-uri nu am stiut ca nu se mai poate reveni la rom-ul initial, care de altfel era si cel mai bun ! Dupa aceea am inteles ca se poate face dump la rom, ceea ce inteleg ca este similat unui rescue cd pentru xp ! daca citesti cu atentie forum-ul o sa intelegi si cum se face ! Inca mai caut rom-ul original !
waffen said:
Salut ! ma adresam celor din reteaua orange romania ! Inainte sa fac mai multe up-grade-uri nu am stiut ca nu se mai poate reveni la rom-ul initial, care de altfel era si cel mai bun ! Dupa aceea am inteles ca se poate face dump la rom, ceea ce inteleg ca este similat unui rescue cd pentru xp ! daca citesti cu atentie forum-ul o sa intelegi si cum se face ! Inca mai caut rom-ul original !
Click to expand...
Click to collapse
Eu cand te-am sfatuit sa scrii si in enleza ,m-am gandit ca poate gasesti dump-ul si la alti utilizatori de spv m700 din alte tari.Nu cred ca spv-ul vandut in Anglia sau alte tari din SE Europei difera de spv-ul vandut la noi. Eu zic ca are acelasi windows 5 in limba engleza, dar asta este parerea mea, faci cum crezi.Speram sa pui un link cu thread-ul in care explica cum se face dump.
Daca reusesc sa fac rost de el ti-l pun la dispozitie, doar ca nu am timp mult de navigat pe net, munca, munca si iar munca. Salutare!
Salutare din nou! Nu stiu daca te intereseaza dar am gasit pe net varianta originala de windows mobile 5, HTC P3600 in engleza. Acum o descarc, daca te intereseaza uite link-ul: http://rs5.rapidshare.com/files/229...WE_1.23.405.2_103_6275_1.38.00.11_108_GPS.exe
Frate nu intentionam sa fiu acid, doar ca nici eu nu am timp mult de navigat ! Merci mult oricum ! hai ca incerc link-ul acum !
Asta e rom-ul pe care l-am gasit si eu intr-un final si l-am instalat ! Problema e ca la cumparare telefonil meu era configurat de orange pentru a alege automat apn-urile functie de adresele accesate ! Oricum rom-ul este ok ! telefonul are autonomie mai mare, e mai rapid ! Merci !
waffen said:
Asta e rom-ul pe care l-am gasit si eu intr-un final si l-am instalat ! Problema e ca la cumparare telefonil meu era configurat de orange pentru a alege automat apn-urile functie de adresele accesate ! Oricum rom-ul este ok ! telefonul are autonomie mai mare, e mai rapid ! Merci !
Click to expand...
Click to collapse
Acest CAB te ajuta? http://www.sharemobile.ro/file.php?id=201778
Eu nu folosec wap si internet mobil, dar il folosesc pentru setarile orange.
waffen said:
Asta e rom-ul pe care l-am gasit si eu intr-un final si l-am instalat ! Problema e ca la cumparare telefonil meu era configurat de orange pentru a alege automat apn-urile functie de adresele accesate ! Oricum rom-ul este ok ! telefonul are autonomie mai mare, e mai rapid ! Merci !
Click to expand...
Click to collapse
Acest CAB te ajuta? http://www.sharemobile.ro/file.php?id=201778
Eu nu folosec wap si internet mobil, dar il folosesc pentru setarile orange.Pe acest forum ai incercat sa cauti? http://www.mobilewave.ro/forum/topic-1771.html
waffen said:
Salutare ! Rog cineva sa faca dump si sa posteze rom-ul cu care vine instalat orange spv m700 de la orange romania ! Multumesc anticipat ! Bogdan
Click to expand...
Click to collapse
Incearca ftp://xda:[email protected]/Uploads/Trinity/dumped_orange_spvm700_RO_ROM_1.23.70.4.rar
rugaminte
lmvic30 said:
Incearca ftp://xda:[email protected]/Uploads/Trinity/dumped_orange_spvm700_RO_ROM_1.23.70.4.rar
Click to expand...
Click to collapse
Cine ma poate ajuta,a ramas blocat pe ecranul de tricolor si nu mai vrea nimic.
incearca pagina asta, vezi ca gasesti sfaturi cum se face cu sd-card eu zic ca asa va merge http://forum.xda-developers.com/showthread.php?t=353685
goalex said:
incearca pagina asta, vezi ca gasesti sfaturi cum se face cu sd-card eu zic ca asa va merge http://forum.xda-developers.com/showthread.php?t=353685
Click to expand...
Click to collapse
multumesc tot incerc dar segeabamnu reusesc nimic,cred ca trebuie sa ma duc la un SERVICE cu el.
megan1 said:
multumesc tot incerc dar segeabamnu reusesc nimic,cred ca trebuie sa ma duc la un SERVICE cu el.
Click to expand...
Click to collapse
Ai incercat asa? ai urmat intocmai pasii care sunt in topicul asta? http://wiki.xda-developers.com/index.php?pagename=Trinity_SDCardFlashing
goalex said:
Ai incercat asa? ai urmat intocmai pasii care sunt in topicul asta? http://wiki.xda-developers.com/index.php?pagename=Trinity_SDCardFlashing
Click to expand...
Click to collapse
am incercat si cu cardul(nici nu vrea sa apara acel meniumapare cel cu tricolorul si nu mai face nimic,pe rosu scrie trin100 IPL-0.50:TRIN100 SPL-1.07.0000), nu vrea sa-l bage in seama,toate rom-urile pe care le-am incercar imi zice ca sunt corupte sau da eroare de conexiune,cred ca ar trebui sa gasesc rom-ul cu wm5 cu care a fost el instalat din fab. poate asa vrea, aparatul a fost luat de la orange in 2007,acum am vazut greseala cred ca trebuie sa mai incerc cu un minisd(acum am folosit un microsd cu adaptor)
MULTUMESC PTR. RASPUNSURI.
megan1 said:
am incercat si cu cardul(nici nu vrea sa apara acel meniumapare cel cu tricolorul si nu mai face nimic,pe rosu scrie trin100 IPL-0.50:TRIN100 SPL-1.07.0000), nu vrea sa-l bage in seama,toate rom-urile pe care le-am incercar imi zice ca sunt corupte sau da eroare de conexiune,cred ca ar trebui sa gasesc rom-ul cu wm5 cu care a fost el instalat din fab. poate asa vrea, aparatul a fost luat de la orange in 2007,acum am vazut greseala cred ca trebuie sa mai incerc cu un minisd(acum am folosit un microsd cu adaptor)
MULTUMESC PTR. RASPUNSURI.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=308691 , incearca acest utilitar, poate functioneaza, la mine a mers am si eu am acelas pda-phone luat de la orange tot in 2007.
goalex said:
http://forum.xda-developers.com/showthread.php?t=308691 , incearca acest utilitar, poate functioneaza, la mine a mers am si eu am acelas pda-phone luat de la orange tot in 2007.
Click to expand...
Click to collapse
Nu reusesc nici cu asta
megan1 said:
Nu reusesc nici cu asta
Click to expand...
Click to collapse
Nu te supara pe mine ca te intreb dar ai facut mai intai super CiD si Hard Spl?
Iar daca l-ai facut ai urmarit daca ai avut erori? Poate ceva nu a mers bine, eu zic sa mai incerci o data cu hard spl si supe cid.
goalex said:
Nu te supara pe mine ca te intreb dar ai facut mai intai super CiD si Hard Spl?
Iar daca l-ai facut ai urmarit daca ai avut erori? Poate ceva nu a mers bine, eu zic sa mai incerci o data cu hard spl si supe cid.
Click to expand...
Click to collapse
am incercat din nou si da eroare de conexiune cu Hard Spl la fel si cu CID.
megan1 said:
am incercat din nou si da eroare de conexiune cu Hard Spl la fel si cu CID.
Click to expand...
Click to collapse
Nu fac asta zilnic si mai multe nu stiu, cred ca da eroare de conexiune din cauza ca nu se mai sincronizeaza pda-ul cu calculatorul. La mine a functionat acest utilitar Trinity splxploit, aveam eroarea 270, se pare ca la tine nu mai merge.Am trei recomandari pentru tine pana ajungi la service si sa dai bani: prima ar fi sa deschizi un topic in engleza si cineva te vor ajuta (cred! ), a doua este sa intri pe mobilewave.ro, este un forum romanesc despre programe, sfaturi, etc pentru toti cei cu pda-phone. Cauta si aici problema ta si daca nu gasesti nimic deschide un topic si poate te ajuta cineva. Si a treia ar fi sa mai insisti pe acest forum, trebuie sa cauti mult pana iti gasesti problema, sigur nu ai fost primul care a patit asa ceva.Succes
I try to update the rom and for i don't know what reason it stops at 7%!
Now i cannot update any rom! (
What to do?
The phone it starts, showing the HTC logo, than the logo of the rom (Win Mobile 6.1 Elegance edition) and stays there!
I cannot connect to my computer or update any rom.
Please, I need help!
Thanks in advance!
Hold camera + voicedial button while soft-reset. What does the bootloader show? If it is hard-spl you should be able to flash from that screen.
Otherwise, try this:
http://forum.xda-developers.com/showthread.php?t=308691
Good luck and make sure to read up on whatever method you're choosing.
again, the same thing.
I tried all methods (soft-reset, hard reset, etc), again it shows the HTC logo then the WM6 logo and then stuck.
LE: ok, i manage to enter bootload menu....the device is now connected to computer but it seems is not CID unlocked.
I try several roms and no result.
Now I'm downloading the official rom for htc trinity.
Anybody know how to cid unlock?
thanks a lot.
first try to download RUU_Trinity_HTC_WWE_1_1_.23.405.2_103_6275_1.38.00.11_108_GPS.exe
google is your friend
Then hold power+cam+ stylus to soft reset,
then install this ROM
Just a thing, if your pda is cid unlock you won't be able to install another ROM and it will stop the install and you go back to your rom.
even If I'm noob in this domain in figure it.
Now I'm downloading the official rom, after I'll try to CID unlock.
But every step at his time.
For the moment, Downloading official rom......
ucla said:
first try to download RUU_Trinity_HTC_WWE_1_1_.23.405.2_103_6275_1.38.00.11_108_GPS.exe
google is your friend
Then hold power+cam+ stylus to soft reset,
then install this ROM
Click to expand...
Click to collapse
@ucla, you're a semi-god!
It works!
Even I'm from Romania and I understand very well Italian, still I want to change my rom.
Now, @ucla, if you can teach me how to unlock CID mentioning that I'm running Win Vista you'll become a real god for me!
Go to
http://forum.xda-developers.com/showthread.php?t=293957
and launch the automatic installation.
but one big thing is that I'm under W XP and it works ... I don't know if it is the same under Vista ..... So .... maybe another semi god will answer you or try to contact "pof" the moderator you post the unlocker
Bye
UCLA
staticxxx said:
I try to update the rom and for i don't know what reason it stops at 7%!
Now i cannot update any rom! (
What to do?
The phone it starts, showing the HTC logo, than the logo of the rom (Win Mobile 6.1 Elegance edition) and stays there!
I cannot connect to my computer or update any rom.
Please, I need help!
Thanks in advance!
Click to expand...
Click to collapse
cam+pwr+reset = "bootloader mode" (each time you try to flash rom use it)
flash Hard SPL
flash GSM 1.56.70.11 (optional, but i recommend)
and after that flash needed rom.
ucla said:
Go to
http://forum.xda-developers.com/showthread.php?t=293957
and launch the automatic installation.
but one big thing is that I'm under W XP and it works ... I don't know if it is the same under Vista ..... So .... maybe another semi god will answer you or try to contact "pof" the moderator you post the unlocker
Bye
UCLA
Click to expand...
Click to collapse
been there. not working!
@matu, yeah, thanx...now it's fine..
staticxxx said:
been there. not working!
@matu, yeah, thanx...now it's fine..
Click to expand...
Click to collapse
Ai rezolvat problema? Poate reusesc sa te ajut cu ceva.
goalex said:
Ai rezolvat problema? Poate reusesc sa te ajut cu ceva.
Click to expand...
Click to collapse
salut,
da am rezolvat problema.
Singura chestie care inca ma enerveaza este ca nu pot sa fac CID unlock.
Am facut o gramada de dwnld cu ROM-uri de aici si nu merg instalate.
Se opreste instalarea. Din cate am inteles este problema cu CID-ul.
Am gasit un CID Unlocker dar ruleaza doar sub XP iar eu am Vista.
Daca poti sa ma ajuti in aceasta problema ar fi ideal.
Mersi anticipat!
Adi,
I don't have vista and I don't know.
You can however unlock using the SD card method:
1) format SD card in FAT32
2) Rename the NBH file from the unlocker to TRINIMG.nbh
3) Put it on SD card
4) Load SSPL manually on the phone, it will read TRINIMG.nbh and ask your confirmation to flash it.
__________________
Asta am gasit dupa ceva sapaturi pe xda la pagina 5 de pe acest post
http://forum.xda-developers.com/showthread.php?t=293957
Ok, o sa-l incerc sa vedem ce iese.
Intre timp ma joc cu SPB Mobile shell 3...
...destul de dragut dar mananca bateria cam repede.
O sa-ti spun daca merge sa fac CID unlock prin metoda ad card.
mersi,
sa fi atent la tot ce scrie, sa nu sari peste randuri ca este important sa respecti toti pasii. De ce zic asta, eu am reusit acum 6 luni sa-mi blochez pda-ul din aceasta cauza.
si eu am scos spb-ul din aceiasi problema, ramaneam fara baterie cand imi era lumea mai draga.Dar de placut mi-a placut.Bafta!
goalex said:
sa fi atent la tot ce scrie, sa nu sari peste randuri ca este important sa respecti toti pasii. De ce zic asta, eu am reusit acum 6 luni sa-mi blochez pda-ul din aceasta cauza.
si eu am scos spb-ul din aceiasi problema, ramaneam fara baterie cand imi era lumea mai draga.Dar de placut mi-a placut.Bafta!
Click to expand...
Click to collapse
desi suna a noob intrebarea, nu este chiar asa.
Unde gasesc comanda de format?
staticxxx said:
desi suna a noob intrebarea, nu este chiar asa.
Unde gasesc comanda de format?
Click to expand...
Click to collapse
Ce sa formatezi? pda-ul?Dupa ce ai bagat cadrul cu toate fisierele din rom-ul sau superCID-ul respectiv apesi butonul de pornire si urmaresti ecranul pda-ului.Daca iti cere PRES SEND, INSEAMNA SA APESI BUTONUL VERDE, CEL DE APELARE.
http://wiki.xda-developers.com/index.php?pagename=Trinity_SDCardFlashing
Ai aici un post cum trebuie sa formatezi pda-ul prin metoda sd-card. Sper sa te ajute.Iti explica pas cu pas ce trebuie sa faci, citeste de 5 ori daca este nevoie, dar este important sa intelegi ce trebuie sa faci.Daca mai ai nelamuriri revino cu intrebari si iti voi raspunde in timpul cel mai scurt.
http://modmydiamond.info/index.php?option=com_frontpage&Itemid=1 aici este o pagina pentru diamond, dar se poate aplica si pentru trinity-ul nostru cu informatiile pe care le contine.
I have my ZL set up to recognize and show 2 languages: 1.English(US) 2. Romanian
I have the following problem, very strange I may add. In romanian language there are some special characters specific for my region/language.
Some of them are displayed but some of them are not displayed. There are 5 special characters but 2 of them fail to display in all apps. However all 5 special characters are displayed without problems in system (keyboard, messaging, sony apps).
This is very frustrating and if anyone has any kind of suggestion...thanks in advance.
asilviug said:
I have my ZL set up to recognize and show 2 languages: 1.English(US) 2. Romanian
I have the following problem, very strange I may add. In romanian language there are some special characters specific for my region/language.
Some of them are displayed but some of them are not displayed. There are 5 special characters but 2 of them fail to display in system and some apps. However in some apps all 5 special characters are displayed without problems.
This is very frustrating and if anyone has any kind of suggestion...thanks in advance.
Click to expand...
Click to collapse
Care sint alea doua caractere care lipsesc??
Sent from my C6506 using xda app-developers app
Ș și ă
Numai în aplicații se întâmplă. Ce ține de sony merge bine... Mesagerie etc
Sent from my C6502
asilviug said:
Ș și ă
Numai în aplicații se întâmplă. Ce ține de sony merge bine... Mesagerie etc
Sent from my C6502
Click to expand...
Click to collapse
Păi inseamna ca e de la aplicații nu de la sony
Sent from my C6506 using xda app-developers app
E destul de ciudat să nu meargă în nici o aplicație de parcă ar fi o conspirație generală.
Am făcut un factory reset dar degeaba... Cele două caractere, când selectate, nu sunt afișate. La tine presupun că merg...
Sent from my C6502
asilviug said:
E destul de ciudat să nu meargă în nici o aplicație de parcă ar fi o conspirație generală.
Am făcut un factory reset dar degeaba... Cele două caractere, când selectate, nu sunt afișate. La tine presupun că merg...
Sent from my C6502
Click to expand...
Click to collapse
la mine nu e nici o problema poate ca ai c6502??
Sent from my C6506 using xda app-developers app
nutzuTo said:
la mine nu e nici o problema poate ca ai c6502??
Sent from my C6506 using xda app-developers app
Click to expand...
Click to collapse
Din punct de vedere al limbii si al setarilor sunt dispozitive identice...stau si ma intreb de ce ai mai raspuns daca nu ai nici cea mai mica idee...
asilviug said:
Din punct de vedere al limbii si al setarilor sunt dispozitive identice...stau si ma intreb de ce ai mai raspuns daca nu ai nici cea mai mica idee...
Click to expand...
Click to collapse
ai dreptate, nu am fost interesat să văd care e problema dar am incercat si eu cîteva programe si la mine nu e problema care o ai tu așa ca ti-am răspuns
Sent from my C6506 using xda app-developers app