Code:
*
* Your warranty is now void.
*
* This kernel is build my ruddnr951 (Kim Kyeongwook) at Korea android Forum.
* If you wanna contact with me, e-mail to [email protected]
--------------------------------------------------------------------------------------------------
* Me and Jollaman999 are not responsible for bricked devices.
*
Kernel Info
Builder : jollaman999
Intro : Added some features from other kernel sources based on CM kernel. And added some I/O schedulers, Governers, Overclock and Battery optimization.
====Features====
- Dynamic Thermal Control: This function automatically adjust throttling settings when CPU clock changed.
- Stock: Optimus G TDMB support for Korea
- Use Android device as USB keyboard/mouse support (Required app included) (Please refer to the youtube links at the bottom.)
- Buzzing sound FIX!!
- Lollipop multirom support!!
- Power fixed based on Gproj!! (Battery standby time greatly improved!!)
- GHOST TOUCH FIXED!!
- Configurable DoubleTap2Wake's touch counts!!
- Random hot reboot fixed.
- f2fs: Latest Linux patches applied.
- random: Latest Linux patches applied.
- Stock's LED driver ported.
- Used a kernel value which is optimized to battery life and performance balance. So you can use without specific settings.
- Built with latest Linaro 4.9.3-2015.02
- Used a Linux 3.4.106 kernel
- Used a XZ kernel extraction to decrease kernel loading time.
- F2FS file system support.
- Kexec Hardboot multi-boot support.
- Knock On available
- Gamma control feature
- Fast Charge available
- Intelli-Plug hotplug applied for battery life
- Dynamic FSYNC used.
- Advance sound control available.
- Voltage Controls
- CPU Downclock & Overclock (Supported clock : 270~1728MHz)
- GPU Overclock (Supported clock : 533/450/400/320/200/128MHz)
- Default Minimum/Maximum CPU clock : 270MHz / 1134MHz for battery life
- 'Smartmax' CPU Governer used as default for battery life
- 'Simple' GPU governer used as a default
- Westwood TCP Congestion used as a default
- Available TCP Congestion : westwood, reno, bic, cubic, highspeed, hybla, htcp, vegas, veno, scalable, lp. yeah, illinois
- Available CPU Governer : dancedance, lazy, wheatly, asswax, intellidemand, interactive, conservative, ondemand, smartmax, smartassV2, abyssplugv2, lionheart, lulzactive, uberdemand, slim, pegasusq, performance
- Available I/O Scheduler : row, cfq, fiops, sio, fifo, vr, zen
====Changelog (Gen2-v2.5_Update8)====
[Gen2-v2.5_Update8]
- Stock: sound: msm: Stock KK ported (Also fixed voice recording issue (Q Voice, Video recording, Headset mic etc...))
[Gen2-v2.5_Update7]
- Stock: Optimus G TDMB support for Korea
- Stock: gee_defconfig: Enable MOBICORE driver (Related with DRM)
- Stock: tdmb: fc8050: Disable mess debug messages
- Stock: tdmb: fc8050: Fix Korean typo in sources
[Gen2-v2.5_Update6]
- All: f2fs updated
- jolla-twrp: Update kernel
[Gen2-v2.5_Update5]
==AIO Updates==
- f2fs: Update vold binary (Fix can't boot when f2fs partion exist.)
[Gen2-v2.5_Update4]
-All: Revert LGE headphone detect issue with noise fix, Fix min/max cpu voltage range
- Stock_KK: Fix compatibility issue for Kitkat
- jolla-twrp Update kernel
[Gen2-v2.5_Update3]
- Stock_KK: Gen2-v2.5 ported succesfully to Stock_KK kernel!!
- gpu: Stock KK porting
- mdp/fb: Stock KK porting
- led: Stock KK porting
- sound: Stock KK porting
- vibrator: Stock KK porting
- backlight: Adjust for Stock KK
- Complied with latest Linaro toolchain (2015.02)
- Lollipop: Re-complied with latest Linaro toolchain (2015.02)
- jolla-twrp: kernel: Re-complied with latest Linaro toolchain (2015.02)
[Gen2-v2.5_Update2]
==AIO Updates==
- ota: Fix FC issue when data is wiped
- unpack-ramdisk.sh: Fix init.d not working issue in some of roms
[Gen2-v2.5_Update1]
==AIO Updates==
- Lollipop - f2fs: Allow use of either f2fs or ext4 for system, data and cache
- Lollipop - rc-L: Remove useless cpu online lines
- ota: Restore sysinit SELinux permission by ota service script
[Gen2-v2.5]
- f2fs: Update to latest f2fs linux-3.4 branch's sources
- random: Update to latest Linux 4.0-rc1 sources
- hw_random: Update to latest Linux 4.0-rc1 sources
- jolla-twrp: jolla-kernel_Gen2-v2.5 applied
- Updates applied to Stock_KK kernels
====Dynamic Thermal Control====
- This function automatically adjust throttling settings when CPU clock changed.
So when you want to change thermal settings directly, you should turn off this function.
You can turn off this function by patching 'Dynamic_thermal_Off' in my server folder. (Not recommended.)
====USB Keyboard/Mouse Working Video====
http://youtu.be/_PZmWDqw6bA
====Configurable Knock On Touch Counts====
0 : Off
1~9 : Wake by n+1 taps. (n = Your setting)
Example)
0 : Doubletap2wake will not working.
1 : Wake by double taps.
2 : Wake by triple taps.
9 : Wake by 10 taps.
Recognizing Time : 100ms * 'touch counts'
(So when you set to 9, you can wake your device by 10 taps in 1 second. )
Known Issues
- When 'Nightmare' governer is selected, cpu cloks are not showing properly.
- USB Keyboard/Mouse driver is not loaded with Stock Kernel
Changelogs
[Gen2-v2.4]
- sched: Various optimizations and updates applied from faux123's mako kk_mr2
- lowmemorykiller: Some of optimizations applied from faux123's mako kk_mr2
- zram: Some of optimizations applied for Android from faux123's mako kk_mr2
- gee_defconfig: Disable unneeded mpdecision
- jolla-twrp: jolla-kernel_Gen2-v2.4 applied
- Updates applied to Stock_KK kernels
- OTA Updater included
[Gen2-v2.3]
- 2015/18/Feb Added - lge_touch_core: Fix bug of hardware keys not working when dt2w is disabled
- intelli_plug: Turn off wcd9310 debug messages
- msm_thermal: Do not working when screen turned off
- msm_thermal: Make temperature check logic simpler (Improve battery life)
- ipv4: try to cache dst_entries which would cause a redirect (CM update)
- intelli_plug/wcd9310: Force intelli_plug working when playing music while screen off
- dt2w: Fix doubletap2wake not working sometimes
- smartmax: Handle sampling_rate_screen_off by early suspend
- dynamic_thermal_control: Remove hardcoded cpufreq table and get it from current table
- jolla-twrp: jolla-kernel_Gen2-v2.3 applied
- Stock_KK kernels updated
[Gen2-v2.2]
- f2fs: Re-work with f2fs sources for Linux 3.4.x (Now working perfectly with no errors!!)
(/data, /cache re-format recommended if you using f2fs already.)
- jolla-twrp: TWRP v2.8.4 version up, jolla-kernel_Gen2-v2.2 applied, Lollipop multirom support
- multirom: v30 version up, Lollipop compatible
[Gen2-v2.0]
- Change logs only applied for CM/AOSP kernels
- Removed CM/AOSP KK kernels.
- Linux 3.4.106
- Compiled with latest Linaro_4.9.3-2015.01-build
- smartmax: sampling_rate_screen_off: Do not call usecs_to_jiffies function twice.
- wlan: prima updated to v3.2.3.197
- zram Support
- arm-crypto: sha-1, aes, sha256, sha512, arc4 optimization for ARM neon
- KEYS: close race between key lookup and freeing
- Low-memory-killer: Logic optimization from Motorola
- int_sqrt: Improve 3x faster integer sqrt
- readahead: make context readahead more conservative
- sound: Enable 320kbps audio recording
- arm: Perf update from Cyanogen Mod kernel_msm
- acpuclock-8064: Remove not working high level clocks (1782~1890MHz)
- gpu: Remove not working 607.5MHz and re-added 450MHz
- clocks: Remove unsafe lower cpu freqs (81~162MHz)
- smartmax: Fix default values
- fs: Always set noatime no diratime on all partitions! I/O Boost!
- board-mako: add missing updates from CAF
- board-mako: Enable Krait Retention
- msm: mdm2: Decrease leakage before QSC power-up
- smartassV2: Fix default values
- gee_defconfig: Compile smartassV2 cpu governor
- mako-sound: Noise fix ported from Stock KK
- mako-regulator: Add missed pm8xxx-adc regulator while ported Gproj power
- sound: Revert Nuplayer fix
- sound: wcd9310: Increase default gain (Increase volume for call speaker/mic and headphone/speaker)
- board-mako: Increase DC voltage level for G (Stock KK)
- mako: Add missed some of related with tabla for G
- cpufreq: Remove uncomfortable governors (nightmare, interactiveX)
- wcd9xxx: Fix headphone detect issue in 3.3V low batt (Stock KK)
- intelli_plug: Set screen off max to 702MHz
- sound: Buzzing sound FIX!! (intelli_plug,wcd9310: Force set 2cpus working when playing music while screen off)
[Gen2-v1.2]
- LP/KK: smartmax: Added sampling_rate_screen_off parameter - Thanks to gu5t3r
(When screen on, smartmax will increase clock based on sampling_rate.
And when screen off, smartmax will increase clock slowly based on sampling_rate_screen_off.)
- LP: mm: Set VM_MAX_READAHEAD to 512
- LP: msm: vidc: Get the current performance level
- LP: Fix some of sources for compatibility with cm12 build. (Kernels's functions are not changed.)
- aroma-installer: Fix logic of LP kernel and KK kernel installation.
- aroma-installer: Fix logic of LP kernel modules installation.
- aroma-installer: Fix logic of finding init.d support - Thanks to gu5t3r.
This patch only applied for AOSP based Kikat & Lollipop kernel.
====Changelog (Gen2-v1.1)====
- dynamic_thermal_control: Prevent dynamic_thermal call when device is hot and go to ideal state
(When device is hot and go to ideal state 'dynamic_thermal' called and change the msm_thermal settings.
So the original max frequency get lower clock step by step when device is hot.
This patch fix this bug.)
This patch only applied for AOSP based Kikat & Lollipop kernel.
====Changelog (Gen2-v1.0)====
- No more update for Kitkat and Stock.
- Restart with Clean Code!!
(Rebuild with Google mako source. Applied latest Linux patches with some of fixes for joll-kernel directly. So all of sources and kernel performance are stable.)
- Applied patches from Linux 3.4.1 to 3.4.105 one by one. (So sources and performance are stable.)
- Dynamic Thermal Control: Automatically adjust throttling settings when CPU clock changed. (Own making!!)
(Solve the existing problem coming back to 1134Mhz despite you change the CPU clock!!)
- Greatly improved battery life due to the source stabilization. (Light user can be used up to a day or more to use.)
- gpu: Fixed to use minimum gpu frequency when sleep. (Improved battery life) (Own making!!)
- Added jolla-kernel logo
- random: Applied all of latest Linux patches
- f2fs: Applied all of latest Linux patches
- Faux Sound: Applied faux123's latest sources
- Faux Gamma Control: Applied faux123's latest sources
- Intelli-plug: Applied faux123's latest sources
- GPU simple governor: Applied faux123's latest sources
- MTP: Applied Google latest sources
- TCP Congestion: Added cubic, highspeed, hybla, htcp, vegas, veno, scalable, lp. yeah, illinois.
- io-scheduler: Added fifo, vr, zen.
- cpufreq: smartmax: Fix some of default values of smartmax governor. (Improved battery life)
- LZ4 compression format support.
- And applied more patches.
[v17_Final - Only for AOSP based Kitkat kernel]
- Dynamic Thermal Control: Automatically adjust throttling settings when CPU clock changed. (Own making!!)
(Solve the existing problem coming back to 1134Mhz despite you change the CPU clock!!)
- gpu: Fixed to use minimum gpu frequency when sleep. (Improved battery life) (Own making!!)
- Added jolla-kernel logo
- io-scheduler: Added fifo, vr, zen.
- cpufreq: smartmax: Fix some of default values of smartmax governor. (Improved battery life)
- MTP: Applied Google latest sources
- futex optimization
- Applied some of cpufreq patches
[v16]
- Use Android device as USB keyboard/mouse support (Required app included)
- L-kernel: Applied latest Cyanogenmod patches with 'seccomp'
- f2fs: Latest linux kernel tree patches applied
(Until Dec 9, 2014 f2fs: avoid to ra unneeded blocks in recover flow)
- f2fs: New 'inline_dentry' mount option applied
- L-kernel: makocam kernel added
- Support Stock camera diriver selection mode for L-kernel
- Support mod/nonmod kernel selection for L-kernel
- Recovery-twrp: Update kernel to jolla-kernel_v16
- Recovery-philz: Update kernel to jolla-kernel_v16
[v15]
- Only provided with my cm-12.0 UNOFFICIAL roms.
- Linux 3.4.105 applied.
- Latest mako's lollipop kernel patches applied.
- Makefile Optimization
v0xE
- L-kernel related fixes.
- Power: Applied gproj based power sources. (Battery standby time greatly improved!!)
- doubletap2wake: Fixed 3 taps issue when phone is suspended!!
- doubletap2wake: You can wake your device by 10 taps in a second!!: eek: (Configurable tap counts!!)
0 : Off
1~9 : Wake by n+1 taps. (n = Your setting)
Example)
0 : Doubletap2wake will not working.
1 : Wake by double taps.
2 : Wake by triple taps.
9 : Wake by 10 taps.
Recognizing Time : 100ms * 'touch counts'
(So when you set to 9, you can wake your device by 10 taps in 1 second. )
- doubletap2wake: Adjusted recognizing time.
- io-sched: Remove bfq io-scheduler that eat more batery. Back to fiops as default io-scheduler.
- Remove TDMB driver that not compatible with jolla-kernel.
v0xD
- f2fs: Applied latest updates until Linux 3.17.4
- random: Applied latest updates until Linux 3.17.4
- CM, L : Latest kgsl driver updated based on Lollipop kernel
- CM, L : Wifi updated based on Lollipop kernel
- L : cm-12.0 Ready (Know issue: Random screen flicking)
- GEEB camera fixed
- Stock: GEEB sdcard ramdisk lines added
- block: bfq io-scheduler added and set to default
- cpufreq: dancedance, smartassV2 new governors added
- leds: re-ported based on Stock KK only for duty cycles
- codel net-scheduler applied
- tcp: Some of optimized and TCP Small Queues applied
- ext4 optimized based on new random driver and FIDTRIM support
- zlib: clean up some dead code
- sound: Some of fixed with pop noise fix
- TDMB driver added (only for GEE and not tested)
- Some of mako to GEE related fixes based on Stock KK
- And more..
v12
- GHOST TOUCH FIXED!!
- Stock Wifi driver ported (Version 3.2.3.13 -> 3.2.7.27) (Speed up)
- Stock LED driver ported (LED duration fixed)
- Android L Kernel support
v11.1
- GUI AROMA INSTALLER Applied and multirom supported. (AIO)
- Built with Linaro 2014.09 gcc 4.9.2 latest toolchain.
- CM : Installation method changed to zlmage installation from boot.img installation. (increase compatibility.)
- CM : Built with latest CM source.
- CM : OTG function added. (experimental, now for test.)
- SPARSEMEM kernel option modified.
- Coretex-A15 memcopy optimization.
- memutils: memcpy, memmove, copy_page optimization.
- lge_touch_core: i2c error fixed when you upgrade your firmware.
- ext4: WB_SYNC_ALL pass called from sync(2) Speed up.
- Latest CM kernel patch applied.
v11
- Stock : Kerenel logo driver modified and jolla-kernel logo added.
- Linux 3.4.104 kernel applied.
- Modified to show jolla-kernel version. (On settings - About phone)
- Faux Sound updated to v3.6
- Stock : OTG Function added (USB can be recognized but not works.)
- GEEB : SDCard supported.
- WQ_POWER_EFFICIENT_DEFAULT power save patch applied.
- Kernel MOD NEON supported.
- msdos, ntfs filesystem is compatible.
- Stock : Backlight level kernel log deactivated.
v10_Stock
- Ported Stock Features : GPU, Video, Wifi, LED, Vibrator, IOMMU, Stock Camera
- Random hotreboot optimized.
- Only ext4 filesystem supported currently.
- Another Changelogs are same with CM/AOSP based jolla-kernel.
v10
- Stock Camera ported.
- Random Hotreboot optimization (When we reboot phone first when flash the rom and kernel or when using, there was random hot reboot. So we found the error at the binder which is the linking system between Android and Kernel. So we compare with Gproj kernel source and fixed it. Now you can use ART runtime as well.)
- Minimum clock increased. (81MHz -> 270MHz
- Throttling temperature limit decreased and fixed bug you can't set again to 1134MHz. (We think the last version's temperature limit is to high, so decreased and When you process Throttling, it has locked into 1134MHz. So we fixed.)
- 384MHZ L2 Cache voltage optimized.
- Android Logging (logcat) optimization and deactivated. (Don't use it commonly.)
- F2FS : Linux 3.16.2 version update proceeded.
- Few kernel settings have errors. Fixed.
- Extra minor patch proceeded.
- OMNI Kernel supported. (OMNI ROM)
v9_Refresh
- Kernel stablize : Applied Linux 3.4.103 patch and fix the bugs and errors on the source.
- mod/normal kernel both supported.
- User can personalize throttling option (You can personalize temperature and clock per level at the TricksterMod application.)
(※ You can use temperature limit option at the TricksterMod application, 'Temperature control'.)
Checked Compatible ROMs
Mod : CM12 (GEEHRC Unofficial), CM11 (GEE Unofficial), AxxionKat, Carbon
Normal (non-mod) : Dirty Unicorns, DayDream (This is Korean ROM ), Liquidsmooth
Stock : ARTMOD, Sling, Miui (you have to flash stock_miui)
G3 : GEE3
We always hearing your feedbacks. If there is a problem with specific ROMs, Error report into this thread.
Code:
---About Multi ROM---
jolla-TWRP is GEEHRC based recovery.
So when you going to flash Gproj based ROM or Stock based ROM, it can occur status 7 error.
In this case, extract the ROM file, and delete 'assert' sentence structure at
'META-INF/com/google/android/updater-script' and re-extract the ROM file. Then flash!
After you flash MultiROM zip, you can see 'MultiROM Fail' error message.
In this case, Go to 'Advanced - Multirom - ListROM - Your second rom - Flash zip'
and flash compatible kernel for your secondary ROM.
Download Link
http://buf.jollaman999.com/jolla-kernel_AIO-gee/
Mirror: https://www.mediafire.com/folder/9eemnevifta2z/jolla-kernel_AIO-gee - Thank you for gu5t3r -
If you wanna use F2FS partition, wipe /data, /cache as f2fs file system with TWRP recovery.
Flashing guide
- Follow the instructions of aroma-installer!
Don't be afraid when you flash F2FS kernel! F2FS has more longer first boot time than EXT4 Filesystem!!!
Battery Life : 10~12 hours in my phone
Jolla-kernel's all features only fully-working at TricksterMod application. There could be some features which are not working at other kernel controll apps.
We are trying to make better kernel everytime. Please understand us effort. :laugh:
jolla-kernel is released with a lots of test in other testphones.
But if you have a bug, Report plz.
Code:
[COLOR="DarkOrange"][B][I][U]CREDIT![/U][/I][/B][/COLOR]
[jolla-kernel source]
[url]https://github.com/jollaman999[/url]
[Referenced sources]
The Linux Kernel Archives : [url]https://www.kernel.org/[/url]
cm-11.0 : [url]https://github.com/CyanogenMod[/url]
Loller79 Solid_Kernel-Cyano : [url]https://github.com/Loller79/Solid_Kernel-Cyano[/url]
faust93 f93_kernel : [url]https://github.com/faust93/f93_kernel[/url]
Docker-J Sail_GPROJ : [url]https://github.com/Docker-J/Sail_GPROJ[/url]
faux123 mako : [url]https://github.com/faux123/mako[/url]
MikeEx kernel_msm : [url]https://github.com/MikeEx/kernel_msm[/url]
flar2 ElementalX-m7-4.0 : [url]https://github.com/flar2/ElementalX-m7-4.0[/url]
justin0406 AK-xGenesis : [url]https://github.com/justin0406/AK-xGenesis[/url]
Porting kexec hardboot : [url]https://github.com/Tasssadar/multirom/wiki/Porting-kexec-hardboot[/url]
544MHz GPU Overclock : [url]http://forum.xda-developers.com/showthread.php?t=2307086[/url]
jaeguek's F2FS filesystem : [url]https://kernel.googlesource.com/pub/scm/linux/kernel/git/jaegeuk/f2fs-tools/[/url]
Donation link has been closed
Download link doesn't work
Nicee, thank you!
Sorry
I've just fixed. If you are downloading with your phone, try Chrome. Chrome supports FTP client
Downloading right now, will report about the stability and performance after trying it a while. A stock kernel with kexec hard boot would be really helpful. (I would build myself but sadly do not have time these days)
Oh... I think my friend will read every replies in this Thread and fix it daily and release more stable kernel.
Sent from my LG-E975 using XDA Free mobile app
ruddnr951 said:
Oh... I think my friend will read every replies in this Thread and fix it daily and release more stable kernel.
Sent from my LG-E975 using XDA Free mobile app
Click to expand...
Click to collapse
Somehow this didn't work on my Carbon gee ROM. I mean, it works, but no matter what governor, voltages, etc in trickstermod, cpu always stays on 81mhz to around 150mhz, bringing the phone to a crawl. Maybe it's because I didn't wipe dalvik, I don't know.
Hmmm... I checked that this kernel is working at Axxionkat, Carbon, GEE Cyanogenmod Roms which are compaitable with MOD kernel.... how about wipe cache, dalvik cache or Flashing rom again...? I think that's not kernel problem
Sent from my LG-E975 using XDA Free mobile app
I try use this kernel on CyanogenMod 11 Nightly, and doesn't work. I installed zip and wipe cache and dalvik, but when I reboot the phone, have a blackscreen.
This kernel is for GEE ROMs. Official CM (E975) is for Gproj. Gproj ROMs are not compaitable with this kernel.
Sent from my LG-E975 using XDA Free mobile app
ruddnr951 said:
This kernel is for GEE ROMs. Official CM (E975) is for Gproj. Gproj ROMs are not compaitable with this kernel.
Sent from my LG-E975 using XDA Free mobile app
Click to expand...
Click to collapse
Ups, fail! Thanks! I installed Carbon KK (based on Gee ROM) and kernel working... Thaaaaaaanks!
I'm really appriciated to you because you choose jolla-kernel :good:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Is anybody else getting this when trying to visit the link? I read above it was fixed, but this is what I'm getting
iamterence said:
Is anybody else getting this when trying to visit the link? I read above it was fixed, but this is what I'm getting
Click to expand...
Click to collapse
use google chrome.
And I found a new XDA Relink error.
the download URL is ftp://ras.jollaman999.com:8221 but when we automatically redirected by XDA, It is relinking to ftp//ras.jollaman999.com:8221. There's no ':'
I fixed link http:// instead of ftp://
Sent from my LG-E975 using XDA Free mobile app
I like this kernel, except...bootanimation =.=". Flash in AxxionKAT and it replace my bootanimation by original CyanogenMOD bootanimation :laugh:
Is the kernel supposed to be 22mbs? I only asked because normally kernels are between 5 and 8mbs
iamterence said:
Is the kernel supposed to be 22mbs? I only asked because normally kernels are between 5 and 8mbs
Click to expand...
Click to collapse
because this kernel added bootanimation.zip, and it's 17MB
the title is a little confusing here. I mean E975 CM is gproj. Some may think that there's a kind of paradox in the tilte. gee and CM. We shouldn't try this kernel on E975 (geehrc) CM based ROMs like pacman, mokee, and...
Related
CM10 Section
I'm not a developer, im taking effort to put more choices of kernel for our community
Disclaimer
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Explanation of Android Governors
Revision Version! Features
Added Governors :-
- Lulzactive
- SmartAssV2
- interactive
- conservative
- ondemand
- performance
IO Scheduler
- noop
- deadline
- row
- cfq
- bfq
- sio
- vr
- Compiled with latest Built with latest custom Linaro 4.7.4-2013.07 toolchain optimized for Cortex-A8 by Christopher83
- Built with -O3 optimization flag (both kernel and modules)
- CPU voltage control VDD sys interface
- Google Snappy V3 Zram
- 377 Ram
- Lowered display panel voltage
- Improve Responsiveness
- Improve Performance
- dynamic read-ahead
- frandom
- Added NEON compilation flag to VFP module
- Lowered wifi voltage
- Increased CPU frequency during boot
- Battery Life eXtender support
- Fixed 100% battery notification after charger unplug
- Dynamic management of dirty page writebacks credit to Christopher83
- Increase audio loudness
- random tweak - credit to imoseyon
- Dynamic management of timer slack - credits to christopher
- LowMemoryKiller management of not killable processes - credits to christopher
- Asynchronous I/O latency to a solid-state disk greatly increased
- CK3 tweaks (Credits to Con Kolivas) - adapted by Christopher
- Simple GPU governor for Andreno xxx - by faux
- Lowest frequency 61Mhz enabled
- Implemented UKSM
- Implemented TurboBoost Mods http://forum.xda-developers.com/showthread.php?p=37905307
Features For Before Revision Version!
Added Governors :-
- Lulzactive
- SmartAssV2
- interactive
- conservative
- ondemand
- performance
- SmartAssV3
- Intellidemand
- InteractiveX
- Hyper
IO Scheduler
- noop
- deadline
- row
- cfq
- bfq
- sio
- vr
Features
- Compiled with latest Built with latest custom Linaro 4.7.4-2013.07 toolchain optimized for Cortex-A8 by Christopher83
- Built with -O3 optimization flag (both kernel and modules)
- OverClock Features
- CPU voltage control VDD sys interface
- SnapDragon Optimization
- Google Snappy Zram
- 377 Ram
- Lowered display panel voltage
- Improve Responsiveness
- Improve Performance
- dynamic read-ahead
- frandom
- Added NEON compilation flag to VFP module
- Lowered wifi voltage
- Increased CPU frequency during boot
- Battery Life eXtender support
- Fixed 100% battery notification after charger unplug
- Dynamic management of dirty page writebacks credit to Christopher83
- Increase audio loudness
- random tweak - credit to imoseyon
- Dynamic management of timer slack - credits to christopher
- LowMemoryKiller management of not killable processes - credits to christopher
- Asynchronous I/O latency to a solid-state disk greatly increased
- CK3 tweaks (Credits to Con Kolivas) - adapted by Christopher
- Simple GPU governor for Andreno xxx - by faux
- Lowest frequency 61Mhz enabled
- Implemented UKSM
Description
Code:
[I]( SmartassH3 - a "smartassV2 with tweaks by H3ROS" governor! )[/I]
[I]( felix is esclusive nexus kernel )[/I]
[I]( 'nexus' is a governor based on interactive and ondemand created by biagio7xD )[/I]
My GitHub
Installation Guide For Revision Version
1. Reboot To Recovery Mode
2. Clear Cache and Dalvik Cache
3. Flash the zip - will go into Turbo Boost Aroma
4. Choose any size for your swap size - Further Information of Turbo Boost > http://forum.xda-developers.com/showthread.php?p=37905307
5. Auto Reboot after finish Aroma
If had any problem only -
6. Reboot to recovery again
7. Clear Cache and Dalvik Cache
8. Reboot (normal boot)
Installation Guide For Before Revision Version !:
1. Reboot To Recovery Mode
2. Flash the kernel
3. Wipe Cache & Dalvik Cache
4. Fix Permissions
5. Reboot (normal boot)
6. Reboot to recovery again
7. Fix permissions again
8. Reboot (normal boot)
Code:
[I]Credit to :-[/I]
- Our Master [URL="http://forum.xda-developers.com/member.php?u=3044346"][B]Arco[/B][/URL] for his kernel source ([I] go press thanks for any posted by arco :D without he, this kernel wont existed[/I] )
- educk for his tutorial and governors
- biagio7xD for extra governors and SnapDragon Optimization
- Christopher83 that helping me teach how to correct the error and advising me
- Xistance for his teaching
- CastagnaIT for his useful sources
- CyanogenMod developers that developing our CM
- Linaro GCC developers let me using this powerful compiler
- hadidjapri hadiconfig (more RAM)
- keff for OC code
- THANKS for delta-roh and Harbir - Turbo Boost Credits [url]http://forum.xda-developers.com/showthread.php?p=37905307[/url]
- faux for Simple GPU governor for Andreno xxx
- xda-developers.com for all the teaching and members
GitHub
XDA:DevDB Information
[Kernel][CM10] HurtSky's Kernel REV10 24/12/2013, Kernel for the Samsung Galaxy W I8150
Contributors
hurtsky
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: REV10
Stable Release Date: 2013-12-24
Created 2013-09-29
Last Updated 2014-08-21
Reserved
LATEST VERSION REV10 : PLEASE DOWNLOAD IT AT ATTACHED FILE IN THIS POST
Older version can be download at HERE and at first post attached files
Changelogs of Revision Version
Code:
[B][I]REV10[/I][/B] 24/12/2013
- revert high mem > normal RAM size now (i experienced back laggy situation and unstable system process so i decided to revert and test it, frankly it really nice using normal RAM size just like what i already mention before - i wont entertain anymore any request about high mem in RAM size)
- revert UKSM into KSM (i still not really satisfied with experience when using UKSM so i revert it to legacy KSM)
- cpufreq: Add cpu-boost driver (thanks to Saravana Kannan)
- cpufreq: Add a sync limit to cpu-boost (thanks to Rohit Gupta)
- build with ccache (thanks to hadidjapri)
- some old error that i miss-look
- kernel: Prevent unnecessary rfkill event generation (thanks to Vitaly Wool)
- jiffies conversions: Use compile time constants when possible (thanks to Joe Perches)
- fs: vfat: reduce the worst case latencies (thanks to xiaogang)
- softirq: reduce latencies (thanks to Eric Dumazet)
( read my github for explanation of all this changes - i wont explain more detail unless for some reasons )
[B][I]REV9[/I][/B] 19/11/2013
- squashed update to 3.0.101 [EOL] version of kernel
- Add BFS Version !
- enable Ultra UKSM
- ReADD 377 Ram Size
- TEST : Reserve More RAM size due to reducing logger size usage.
[B]REV8 fixes[/B]
- fix WSB again - thanks to Keff
[B][I]REV8[/I][/B] 16/10/2013
- squashed update to 3.0.100
- enable unaligned access
- fix white screen bug - credit to Keff
[B][I]REV7 [/I][/B]14/10/2013
- squashed update to 3.0.99
- minor updates - github
[B][I]REV6[/I][/B] 30/9/2013
- squashed update to 3.0.97
- updated frontswap
- sync with arco latest changes
- disable UKSM
- activate Normal KSM
[B][I]REV5[/I][/B] 15/9/2013
- squashed update to 3.0.96
- sync with arco latest updates - github
- backport zram from 3.7 kernel - credits to boype (modified and adapted for this kernel by myself)
- Implement zsmalloc from 3.7 kernel for better Zram operation - credits to boype
- Implement zcache-main for better Zcache operation
- Reactivate normal KSM - it is better with this all modification
- Test - Implement - Optimize copy_page for modern ARM platforms and Optimize ARM memset and memzero functions - credits to boype (see at my github for more information)
- Enable Compaction - testing mode
- Add SIO Plus I/O / block
- Completed Optimize freezing tasks by reducing task wakeups by Collin Cross - [URL="http://linux-kernel.2935.n7.nabble.com/PATCH-00-10-optimize-freezing-tasks-by-reducing-task-wakeups-td641856.html"]For more information[/URL]
- Tweaks - Deadline: Allow 0ms deadline latency, increase the read speed by xiaobing tu
- Tweaks - adaptive vfs_cache_pressure on suspend / resume ( low vfs_cache pressure values save battery while idle, while
a low value also causes stutter with longer up times )
- Tweaks - BFQ scheduler tweaks (thanks pkgnex & Khrushy from Franco dev team) - credit to boype
- Remove Snappy Google compression support for Zram
- Remove Zram For Android Optimization
[B][I]REV4[/I][/B] 6/9/2013
- Add Zram For Android Optimize
- Enable Cleancache
- Enable Zcache
- Add Lz4 compressor for lib - not enable just to put more features
- Use Snappy Compressor for Lib and crypto
- Remove Turbo Boost - seems it more good in performance without it
[B][I]REV3[/I][/B] 1/9/2013
- Squashed updated to 3.0.94
- Normal RAM size, no high MEM !
- Fix audio lag !
- Minor updates
- Remove all start on boot default for - Dynamic management of timer slack , LowMemoryKiller management of not killable processes -
USE PERFORMANCE CONTROL to enable it > [url]http://forum.xda-developers.com/showthread.php?t=2401988[/url]
[B][I]REV2[/I][/B] 24/8/2013
- correcting Zram Kconfig from old kernel version.
- update Snappy Google Zram Version!
- Remove Unnecessary Commits
- Update LZO compression Lib
- Sync with arco latest kernel 3.0.93
- Modified from beginning
- fix sudden hang during voltage changes
- remove OverClock features - available 61Mhz-1.4Ghz
- remove governors - Only left SmartAssV2 and Lulzactive
- zram source updated !
- Snappy Google compression V3 for zram
- Implement Turbo Boost Mods !
Old Version Changelogs
Code:
[COLOR="DeepSkyBlue"]Arco Kernel with added Governors Only[/COLOR]
[B][I]v1.2[/I][/B] 14/5/2013
-sync with latest arco kernel 3.0.78
[B][I]v1.1[/I][/B]
- sync with latest arco kernel 3.0.72
[I][B]v1.0[/B][/I]
- sync with latest arco kernel 3.0.71
- SmartAssV3
- Felix
- Nexus
- InteractiveX
- OndemandX
- LionHeart
- added sio
- added vr
- Lulzactive
- SmartAssV2
- interactive
- conservative
- powersave
- ondemand
- performance
- noop
- deadline
- row
- cfq
- bfq
- CPU voltage control VDD sys interface ( Adjust Your voltage using any 3rd application e.g - android tuner )
- dynamic read-ahead
Code:
[COLOR="MediumTurquoise"]Additional Optimization Version[/COLOR]
[B][I]V4.0[/I][/B] 16/8/2013
- squashed kernel update to version 3.0.91
- fix lowered WIFI voltage - thanks to [user=4410351]@honeyx[/user] because mentioning it
[B][I]V3.9[/I][/B] 13/8/2013
- squashed update kernel 3.0.90
- Added improve sensitivity from Project Lard
- minors updates
[B][I]V3.8[/I][/B] 11/8/2013
- sync with arco latest version 3.0.89
- fixed usb charging - credit to arco
- added 518Mhz frequency - credit to honeyx
- Fix audio lag while using Lulzactive Governors - credit to honeyx
- Implement Suspenze_Freeze - more battery saver
- Implement UKSM ( ultra KSM )
[B][I]V3.7[/I][/B] 29/7/2013
- Better script in RAMDISK for kernel tweaks - credit to christopher83
- Enable 61Mhz frequency, no more Sleep of Death
- Implement Simple GPU governor for Andreno xxx by faux - test - (more battery friendly)
- Updated Freezer source - refer to github
- Updated Idle CPU source - refer to github
- Updated random source with some hack by Dorimanx - refer to github
- minor update - refer to github
[B][I]V3.6 [/I][/B]25/7/2013
- squashed update 3.0.86
- small update of power management
[B][I]V3.5[/I][/B] 17/7/2013
- squashed update 3.0.86
- Built with latest custom Linaro 4.7.4-2013.07 toolchain optimized for Cortex-A8
- implement Dynamic management of timer slack - credits to christopher
- implement LowMemoryKiller management of not killable processes - credits to christopher
- Asynchronous I/O latency to a solid-state disk greatly increased
- CK3 tweaks (Credits to Con Kolivas)
- updated power management sources
- updated voltage regulation - lowered some voltage
- random tweaks
- frandom fix - thanks to keff
[B][I]V3.4[/I][/B] 15/6/2013
- sync to arco latest repo 3.0.82
- Dynamic management of dirty page writebacks credit to christopher83
[B][I]V3.3[/I][/B] 8/6/2013
- sync with arco latest repo 3.0.80
- added intellidemand governor
- removed nexus governor
- frandom fix
- optimized slub allocator
- lowmemorykiller: Voku and Dorimanx tweaks for LMK -credits to Christopher83
- Dynamic Fsync v1.2
- Rwsem Update
- Reenable Gentle Fair Sleepers
- other minor changes- refer to github.
[B][I]V3.2[/I][/B] 28/5/2013
- Compiled with latest Cross Compiler Toolchains - Linaro GCC 4.7.4-2013.05 Toolchains
- sync with latest arco kernel 3.079
- using handi config - 378ram
- revert old audio loudness and change with Increased audio loudness (from Skywalker) (rev 2) - credit to CastagnaIT
- bring back 100% battery notification after charger unplug
- some other minor updates
[B][I]V3.1[/I][/B]14/5/2013
-sync with latest arco kernel 3.0.78
[B][I]V3[/I][/B]
- sync with arco's latest kernel 3.0.77 and others updates
- restart work with new environment
[B][I]Test Version 3[/I][/B]
- Disabled Gentle Fair Sleepers for better performance
- Overclock support added back (thanks to keff)
- Increase audio loudness
- Added Hyper Governor
[B][I]Test Version 2[/I][/B]
-sync with arco latest kernel (3.0.74)
[I][B]Test Version 1[/B][/I]
- sync with arco latest kernel (3.0.73)
- removed some governors (powersave, ondemandX, felix)
- removed OC support
[B][I]V2.2[/I][/B]
- revoke from scratch (latest kernel)
- Lowered display panel voltage
- Lowered wifi voltage
- Increased CPU frequency during boot
- Battery Life eXtender support
- Fsync control
- Fixed 100% battery notification after charger unplug
[B][I]V2.1[/I][/B]
- sync with arco latest kernel 3.0.72
- Compiled with Linaro GCC 4.7.3-2013.03 toolchain optimized for Cortex-A8 cpu with Neon technology support
- revert to 371mb Ram
- Improve Responsiveness
- Added NEON compilation flag to VFP module
[I][B]V2[/B][/I]
- Wifi Fix - ivendor
- SnapDragon Optimization
- Google Snappy Zram
- 376mb Ram
- OC support
- dynamic read-ahead
- frandom
All start on boot default for - Dynamic management of timer slack , LowMemoryKiller management of not killable processes Already been removed !
- USE PERFORMANCE CONTROL to enable it > http://forum.xda-developers.com/showthread.php?t=2401988
Settings of The Available Features
partly been taken from Christopher explanation thread - http://forum.xda-developers.com/showthread.php?t=2172148 all credit go to Christopher83 please thank he for prepare this detail of function
LowMemoryKiller management of not killable processes
This feature allows to define processes and system processes white-lists filled with the preferred process names and to not be killed by lowmemorykiller, unless it is absolutely necessary.
This feature exposes four new lowmemorykiller parameters:
- donotkill_proc, is the flag to enable / disable this feature for the processes chosen by the user
- donotkill_sysproc, is the flag to enable / disable this feature for the system processes chosen by the user
- donotkill_proc_names, is the list of process names (comma separated) chosen by the user to be preserved from killing
- donotkill_sysproc_names, is the list of user system process names (comma separated) chosen by the user to be preserved from killing
When the lowmemorykiller needs to free ram, it will first kill the processes not included inside the two process name lists chosen by the user.
If there are no more standard killable processes, then it will be necessary to kill one of the processes included inside one of the two white-lists, to prevent system hangs, slowdowns, etc.
How to customize the white lists of processes to preserve from killing:
On HurtSky's Kernel the feature is enabled by default and the provided processes white lists are the following:
- donotkill_proc_names = "com.cyanogenmod.trebuchet,com,android.inputmethod.latin"
this means that Trebuchet Launcher,stock keyboard will be preserved from killing
- donotkill_sysproc_names = "android.process.acore,com.android.phone,com."
this means that the system process, the phone process will be preserved from killing
1) By using a customized init.d script (the custom value will be always restored after a reboot, if you don't format the system partition)
- Download the script named 80dnkp
- If the file has been saved with .txt extension (stock browser), rename it by removing the .txt extension
- Edit the file by setting your preferred status and processes list
- Copy the new file inside /etc/init.d
- Give the rwxr-xr-x permissions to the file (read, write, execution for owner, read and execution for group users, read and execution for others)
- Reboot
2) By directly editing the files inside /sys/module/lowmemorykiller/parameters (note that set values will be lost after a reboot/shutdown)
3) By using Terminal Emulator (note that set values will be lost after a reboot/shutdown)
- Open Terminal Emulator
- Run these commands if you want to enable the feature
Code:
# To enable this feature for the processes chosen by the user
echo 1 > /sys/module/lowmemorykiller/parameters/donotkill_proc
# To enable this feature for the system processes chosen by the user
echo 1 > /sys/module/lowmemorykiller/parameters/donotkill_sysproc
- Run these commands if you want to disable the feature
Code:
# To disable this feature for the processes chosen by the user
echo 0 > /sys/module/lowmemorykiller/parameters/donotkill_proc
# To disable this feature for the system processes chosen by the user
echo 0 > /sys/module/lowmemorykiller/parameters/donotkill_sysproc
- Run this command if you want to add, for example, Trebuchet Launcher (CM default launcher) and the default keyboard to the processes white list
Code:
echo "com.cyanogenmod.trebuchet,android.inputmethod.latin" > /sys/module/lowmemorykiller/parameters/donotkill_proc_names
- Run this command if you want to add, for example, the system process, the phone process and DSP Manager to the system processes white list
Code:
echo "android.process.acore,com.android.phone,com.bel.android.dspmanager" > /sys/module/lowmemorykiller/parameters/donotkill_sysproc_names
Click to expand...
Click to collapse
This features currently been disable because normal KSM react more better with current settings
Ultra ksm
UKSM is more optimized and also working for single core systems. using this should give much better ram usage, but at the cost of more cpu usage - ( it seems latest version of UKSM optimized for battery usage also )
In this kernel the UKSM off by default -
How to stop and re-run :
to stop uksm run:
echo 0 > /sys/kernel/mm/uksm/run
for re- run:
echo 1 > /sys/kernel/mm/uksm/run
Redirect to this post if users want to enable it on boot > http://forum.xda-developers.com/showpost.php?p=44606319&postcount=880
This UKSM can be tweaked more by visiting this thread http://forum.xda-developers.com/showthread.php?p=44531620
thanks for @eryzerz for informing this
Click to expand...
Click to collapse
This features also already been remove from package, you can download it from their official thread
Some Information about TURBO BOOST mods http://forum.xda-developers.com/showthread.php?p=37905307 < for futher information ! Please read !
This quote taken from TURBO BOOST thread ! Credit goes to TURBO BOOST DEVELOPERS
Disadvantages of a NORMAL swap file on your sdcard:
A sdcard is always slower than internal memory
You may NEVER unmount the sdcard or connect your phone to your computer, because you then just kill your swap file – it is the same as pulling out the Ram of your running computer!
Disadvantages of a swap partition on your sdcard a.k.a. HARD SWAP (the one that you all always swap ! ) :
A sdcard is always slower than internal memory
You will need a separate partition on your sdcard
You can connect the sdcard to your computer, but you cannot unmount and remove it without powering off your phone – you would kill your swap space immediately!
Disadvantages of a swap file in RAM - a.k.a. ZRAM:
This reduces the already low RAM memory
Leads to many low memory problems, like sense restarts and lags
TURBO BOOST ! PART
Advantages of 98swap_<partition> (TURBO BOOST MODS) compared to the methods above:
It uses internal memory – so it is fast!
This memory is not available to the user (/cache and /system) – so it does not decrease any space given to the user
It does not use your sdcard in any way – so feel free to unmount and remove your sdcard whenever you like – also without powering off your phone!
Disadvantages of 98swap_cache
None - you name it!
Click to expand...
Click to collapse
Click to expand...
Click to collapse
FEEDBACKS / QUESTION / BUGS
Normal Question
- how the battery consumption?
hurtsky said:
here my screenshot about idling power consumption.. i let my phone really sleep today more good than before ....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
dollyaja said:
I hope the latest build can beat up this one. DOWNLOADING!!
Sent from my GT-I8190 using Tapatalk 2
Click to expand...
Click to collapse
- how the Performance?
K_TECH said:
i try to use 0,3-0,8Ghz, & play DeadTrigger,NFS,PES2012,SubwaySurf.. i had no lag too "without tweak"...
Big thanks to hurtsky :thumbup::thumbup::thumbup::thumbup:
Click to expand...
Click to collapse
dec0der said:
playing candy crush, hill climb, minion rush and pou (lolz) NO LAG! i wonder how much max ram can kernel 3.x.x can go... (.)^(.)
Click to expand...
Click to collapse
BUGS ?
Some users reported that incoming call abit slower to wake
- this just because updated of suspended , it make the wake up abit slow but it help reducing power consumption
Click to expand...
Click to collapse
Re: [Kernel][CM10] HurtSky's Kernel V1.0 1/4/2013
First.. thanks for this
Updated to New Version
Re: [Kernel][CM10] HurtSky's Kernel V2.0 4/3/2013
nice kernal!^^
yet now not found bug yet~smooth!haha~
Sent from my GT-I8150 using xda premium
Re: [Kernel][CM10] HurtSky's Kernel V2.0 4/3/2013
New thread and new kernel? Whats the difference? Frandom but no high mem bro? Good job.
Sent from my GT-I8150 using xda premium
---------- Post added at 08:26 PM ---------- Previous post was at 08:23 PM ----------
Cm10 or cm10.1? Confused here
Sent from my GT-I8150 using xda premium
CM10 here.. sorry forgot to edit at top. 376 ram start with V2
smoothest kernel ever tried with games ;D
How sbout batery?
looks good
Nice post, are this kernel compatible with cm10 alpha 7? Sorry for my by english.
Sent from my GT-I8150 using xda premium
Aldich13 said:
Nice post, are this kernel compatible with cm10 alpha 7? Sorry for my by english.
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
Yes. It is based on latest arco cm10 alpha7 kernel.
Sent from my GT-I8150 using Tapatalk 2
waiting for new kernel (Cm10.1 Alpha 2)
ghost141 said:
waiting for new kernel (Cm10.1 Alpha 2)
Click to expand...
Click to collapse
in cloning process
waiting for cm10 new kernal~XD
add oil~
Sent from my GT-I8150 using xda premium
updated to new version
thx~
will flash it now~^^
Sent from my GT-I8150 using xda premium
---------- Post added at 02:26 PM ---------- Previous post was at 01:41 PM ----------
I already flash this kernal, but it stuck on boot...is it the problem of undervolt too much? batur kernel also happened this be4 ~
Hope can fix early~^^
Sent from my GT-I8150 using xda premium
yugioh93 said:
thx~
will flash it now~^^
Sent from my GT-I8150 using xda premium
---------- Post added at 02:26 PM ---------- Previous post was at 01:41 PM ----------
I already flash this kernal, but it stuck on boot...is it the problem of undervolt too much? batur kernel also happened this be4 ~
Hope can fix early~^^
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
hurm... i see... i will wait others feedback also..
Did not boot for me too. Stuck after Samsung logo. Thank god I back up stock beta 1 kernel.
It suppose to be v2.1 for the latest right? You named it v2.2 there. Is it mistaken for the v2.2 for cm10.1?
-XDA Rocks-
SuperKernel for SM-G930F/FD/K/L/S/W8
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Supports all touchwiz roms 6.0.1 on BPH6 base and higher
IF YOU FOLLOW MY STEPS BELOW, YOU WILL LOSE YOUR WARRANTY, KNOX WILL DISPLAY 0x1! I'M NOT RESPONSIBLE FOR ANY DAMAGED DEVICE!
Please check Question and Answer Thread first!
If you want to take my work and need it somewhere, or do other things with it, please ask me first for the permission. Otherwise you are not allowed to take it! Thank you !
SuperMan-Rom, a Touchwiz based rom made by myself!
Features of this Kernel:
- Build with latest official google toolchain v4.9
- Build with ERH1 kernel source!
- Latest Linux version 3.18.120, is always up to date
- Performance and Batterylife improved
- Choose between different CPU governors: performance, powersave, userspace, ondemand, interactiv (default), conservative, zzmoove, barry_allen, nightmare, darkness, pegasusq, yankactive intelliactive, ondemandplus, intellimm, bioshock, lionheart, smartmax, smartass2, smartmax_eps, alucard, blu_active, cafactive, electrodemand, ondemand_x, hyper and intellidemand
- Built with latest ramdisk sources from samsung (ERG2)
- Frandom Support
- Thunderplug hotplug driver can be selected in aroma (only for advanced users!)
- Gzip compressed ramdisk (supersu, magisk etc will work fine)
- I/O schedulers: CFQ (Default), ROW, No-op, Deadline, BFQ, FIOPS, SIO, VR, ZEN, FIFO, maple and SIOplus
- UKSM (Ultra Kernel Samepage Merging)
- Zram can be set in synapse
- Gentle fair sleeper switch enabled
- StateNotifier included
- HTC's async added
- Fsync toggle
- LED Control
- Charging control
- HMP control
- Full CPU/GPU control in synapse
- DVFS in Synapse
- Many controllable wakelocks
- Underclock: big core to 312Mhz, little core to 338Mhz
- Overlock: depens on your ASV
- GPU OC to 806 Mhz
- Init.d Support
- NTFS file system enabled
- CIFS/NFS file systems enabled
- F2fs supported
- Allow ADB-Insecure
- Wlan Wakelock decreased
- Fully controllable with synapse
- TCP (Network) control: Bic (default), Reno, cubic, Westwood, Highspeed, Hybla, HTCP, Vegas, Veno, Scalable, LP, Yeah and Illinois
- Selinux is set to permissive
- Zen-Tune implemented
- All bad samsung drivers disabled (like tima or rkp)
- Force encryption disabled
- Knox faked to 0x0
- Boeffla wakelock control
Download:
Marshmallow V1.X:
V1.9.7 on AndroidFilehost
Nougat V2.X:
V2.11.0 on AndroidFilehost
Oreo V3.X:
V3.1.0 on AndroidFilehost
Download via GrifoDev
All old releases
Bugs/Problems:
- None
Instructions:
0. Make a backup of your current stock kernel in TWRP, just in case you want to go back
1. Install a custom recovery for your phone, like this one here:TWRP
2. Follow the instructions on the page above, until you get a working recovery
3. Download the Kernel from below and copy it to your external SD Card
4. Reboot to your recovery by pressing volume up, home button and power button at the same time.
5. Install zip/select the kernel
6. Flash supersu, phh's root, magisk and all things that modify your boot.img
7. Wipe cache and dalvik cache (recommand)
8. Reboot
If you wanna join the beta tester group, download yourself telegram and click on the chat link: Telegram Group
Support:
If you like my work, feel free to hit thanks and/or give me a small donation by clicking the link right below. Thank you very much in any way! :good:
PayPal
Credits/Thanks:
- Samsung for sources
- the great linus for his amazing kernel source
- arter97
- Jesec (for the great FP fix!!)
- dorimanx
- AndreiLux
- halaskz
- neobuddy83
- UpInTheAir for his great Synapse implementation
XDA:DevDB Information
SuperKernel for herolte, Kernel for the Samsung Galaxy S7
Contributors
Tkkg1994
Source Code: https://github.com/GrifoDev/SuperKernel
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: V3.1.0
Stable Release Date: 2018-08-31
Created 2016-05-30
Last Updated 2018-09-25
Changelog:
Old Changelogs:
SuperKernel V1.0:
- Changes compared to stock:
- updated CPUfreq drivers
- updated to latest stable linux (3.18.34)
- updated zram/zsmalloc and zswap for better ram management
- implemented tasks adj tree
- updated ext4
- updated crypto files
- added UKSM
- updated workqueue and sched features
- added gentle fair sleepers switch
- added new governors, ioscheds and tcp
- backports from 4.0 kernel
- many more things (already over 1000 changes compared to stock!!!)
- detailed history
SuperKernel V1.1:
- fixed fingerprint support, thanks to @Jesse Chan who found the right files to delete!
- arm64: mm: support ARCH_MMAP_RND_BITS
- int_sqrt.c: Correction square root algo with naming
- int_sqrt: Improve 3x faster integer sqrt
- mm: mmap: add new /proc tunable for mmap_base ASLR
- mmc: core: Expose use_spi_crc module parameter in sysfs (and disable it to gain perfomance)
- tima, knox and all "bad" samsung related configs are disabled now!
- over 100 updates in kernel/sched and in kernel/rcu to gain performance and better batterylife
- as always, visit github to see what exactly changed!
SuperKernel V1.2.1:
- Reverted back some changes I made in kernel/sched and kernel/time -> Probably fixed the random reboots (I never had one before, so you need to test this)
- Added the requested ROW iosched
- Added UC/OC frequencies thanks to @Jesse Chan (Kernel detects if you phone is capable or not for OC (jesses work), I added a check that only Grade A phones have full OC)
- added DAX to fs
- Many /mm and filesystem Updates (for ext4, ext3, ext2 and f2fs)
- Applied Jesse's fingerprint lag fix
- updated kernel/locking
- implemented Zen-tune V4.5
- cfq-iosched: fix the setting of IOPS mode on SSD
- More changes on github
SuperKernel V1.2.5:
- changed ramdisk compression from lz4 to gzip (which should fix systemless xposed)
- add a fsync toggle to enable and disable fsync
- added async from HTC
- Use erandom functions
- added wakup toggle for wlan
- mm: Allow for Exynos swap to be enabled
- enabled 2 additional lower CPU steps
- update "mm/zsmalloc: don't fail if can't create debugfs info"
- updated cifs/nfs/nfsd and filesystems
- updated memory management (page_alloc, vmstat, etc)
- added new z3fold driver
- probably made fingerprint scanner a little big faster
SuperKernel V1.3.1:
- Updated ramdisk to APF2
- Updated linux to 3.18.35
- removed the red latter at start up (you really really wanted that )
- Fixed random reboots from 1.3 in superman rom
- added a wakelock fix who should fix some google wakelocks
SuperKernel V1.4:
- completely reworked my w. Wipe cache and dalvik cache (recommand)
hole source code, now available under: Github
- Updated ramdisk with latest supersu patch
- many updates in /base/power/opp
- backports from 3.19 branch
- interactive updates (even more smooth now)
- added kasan for arm64 devices
- overall smoothness improved
- tested over one day, not a single reboot till now
SuperKernel V1.7:
- fixed phone turning on when offline charging
- Updated base and ramdisk to latest BPH6 source, this kernel will only work on BPH6 ROM!!!!
- added full synapse support, thanks to UpInTheAir (I adapted his implementation to work on S7)
- Updated linux to 3.18.39
- added f2fs support for /data
- fixed private mode not working after a reboot
- fully remade the whole source tree to get you the best experience!
- fixed the tcp bug which would otherwise make your phone vulnerable
- some other backports
- updated workqueue
- switched to 7.0 sabermod toolchain
- many more things I may forgot
SuperKernel V1.8.5:
- Started from scratch on BPHJ source code
- No more freezing, not a single problem left anymore!
- Updated to 3.18.42 linux (latest)
- Merged some new linaro patches into kernel
- f2fs should now work (and stay) on partitions you have chosen
- HMP opimizations added (tunable in synapse)
- GPU UC removed for now
- CPU OC/UC enabled, but stock freqs are default on first flash
- Disabled PEWQ (can be enabled in synapse)
- Updated thermal
- Disabled task ADJ tree
- enabled hmp packing
- crypto updated
- cpufreq some small updates
- BPIF ramdisk
- Selinux audit configurable
SuperKernel V1.9:
- Based upon BPJ7 source code
- Updated to linux 3.18.44
- added GPU OC to 806Mhz (thanks to @lyapota)
- updated ramdisk to BPJ7
- fixed some battery settings in synapse
- updated busybox to 1.26
- patched CVE-2016-5195
- changed behavior of cpu on high freqs a bit
SuperKernel V1.9.2:
- Updated to BPJG source drop
- Updated ramdisk to BPJG source
SuperKernel V1.9.5:
- This kernel is only for MM!
- Ramdisk base changed to BPL3 (source base is still the same)
- Updated linux to latest 3.18.45 version
- Backported most crypto drivers form 4.4 mainstream linux
- Enabled new crypto drivers and optimizations
- Updated random drivers
- Updated synapse, hopefully all is up to your needs now
- Added thunderplug hotplug (keep in mind that playing with thunderplug settings may lead to SOD)
- Added a special tab for hotplug drivers: Stock, disabled or thunderplug
- Updated busybox
- Updated script to create an init.d file if not existing
- Fixed LED fading in synapse
- statenotifier enabled again for thunderplug
SuperKernel V1.9.6:
- Based on latest BPL3 source drop release
- Fixed adaptable storage problem
SuperKernel V1.9.7:
- Rebased on latest BPLB Kernel source drop
- Updated ramdisk to latest BPLB
- Updated Linux version to 3.18.46
SuperKernel V2.0:
- Only for NOUGAT and TOUCHWIZ roms
- Rebased on latest DPLT base
- Latest DPLT ramdisk
- Latest f2fs backport from 3.18.y branch
- Maple iosched added (needs testing)
- selinux: nlmsgtab: add SOCK_DESTROY to the netlink mapping tables
- UPSTREAM: capabilities: ambient capabilities
- BACKPORT: full hardened usercopy backported
- mnt: Add filesystem private data to mount points
- New DVFS tab in synapse
- Updated all mcRegistry files to Nougat
- Changed toolchain to selfcompiled GNU 6.3 a53 optimized
- Sqlite binary updated
- Fstrim added
- Busybox changed to sbin/busybox (needs to be at this directory otherwise synapse won't work!)
- Some other things I may forgot
SuperKernel V2.0.1:
- Linux updated to 3.18.47
- busybox detection enhanced (you can now install to /sbin, system/xbin or su/xbin)
- State notifier disabled by default
- Allow all cores to go to highest freq
- People report working deepsleep so if it does NOT work for you, give me your wakelock stats, otherwise that's not helping anyone
SuperKernel V2.0.2:
- Updated ramdisk to DQAS
- Changed some settings in wakelock tabs for synapse (deepsleep issue was produced setting to extreme levels in synapse)
SuperKernel V2.1.5:
- Based on latest DQB3 release
- Updated Linux version to 3.18.48
- Updated ramdisk to DQB3
- Updated all mcRegistries to DQB3
- Added HID gadget keyboard/mouse patch
- Updated android binder driver
- Also one file to flash for all variants
SuperKernel V2.2.0:
- Based on latest DQB7 source drop release
- Updated to latest DQB7 ramdisk
- Fake knox 0x0 (as in superman-rom 2.2 or superstock-rom 2.5) (credits to @lyapota )
- Fixed init.d not working correctly sometimes
SuperKernel V2.4.2:
- Completly rebased on top of superstock kernel
- Based on latest DQCG release
- Updated ramdisk to DQCG release
- Added and reworked scripts to fake knox (should also work with supersu now)
- Updated conservative and ondemand govenror
- Added PWM flicker free patch
- Fixed safetynet failing sometimes
SuperKernel V2.4.3:
- Updated Zen-tune to V4.10 version (only minor changes)
- Fixed thunderplug showing errors in synapse
- killed PWM flicker free due to many broken stuff
- mcRegistry files have been upgraded to DQCG
- Reverted many sched patches, I think general performance is much better now (maybe placebo idk), please let me know your thoughts!
- Fixed some synapse errors here and there, still I haven't had the time to work on cortex brain staying offline, sorry guys
SuperKernel V2.5.0:
- Source updgraded to DQD1 (same as DQD2)
- Ramdisk updated to DQD2
- mcRegistry updated to DQD2
- Fixed external iosched error on Synapse
SuperKernel V2.5.2:
- Ramdisk updated to DQD3
- mcRegistry files updated to DQD3
- Linux version updated to 3.18.51
SuperKernel V2.6.1:
- Updated to DQEF source code
- Updated ramdisk to DQEF
- Added more flags to resetprop (secret mode in browser should work again, at least it did on the s8)
- Updated to most recent f2fs branch from official google supporter
- Updated Linux to 3.18.56
- Updated mcRegistry to DQEF
SuperKernel V2.7.0:
- Based on latest DQFM source code
- Ramdisk updated to latest DQFM
- Updated linux to 3.18.60
- Reverted a patch in one of those linux updates which broke deepsleep in some cases
- Changed code for mcRegistries: they won't get replaced anymore, it just deletes the "bad" file
- Added spectrum support, untested!
SuperKernel V2.7.2:
- Based on latest DQG1 source code
- Ramdisk updated to latest DQG1
- Updated linux to 3.18.66
- Includes GPU libs, so there is no chance after another kernel this will bootloop!
- Since samsung is not updating their kernels very frequently on the s7, I thought I better push out some small updates
SuperKernel V2.8.0:
- DQH8 source drop update
- DQHY ramdisk update
- Linux update to 3.18.70
- Toolchain update to GNU GCC 6.4.0 @djb77
SuperKernel V2.9.0:
- Finally an awesome update to DQIC with a much higher changelist!
- DQIC ramdisk update
- Linux update to 3.18.72
- Updated AIK to V2.9
SuperKernel V2.10.0:
- DQJ1 source drop update
- DQJ1 ramdisk update
- Linux update to 3.18.77
- 6.4.1 toolchain update to @djb77
SuperKernel V2.10.1:
- DQK1 source code shares the same source as DQJ1, that's why it's only a small change
- DQK1 ramdisk update
- Linux update to 3.18.83
- Toolchain updated thanks to @djb77
- Boeffla wakelock control added
SuperKernel V2.10.5:
- DQLF still has the same kernel source code as DQK1
- DQLF ramdisk update
- Linux updated to latest 3.18.91
- Updated toolchain
- F2fs update to latest release
- AIK updated to v3.1
SuperKernel V2.11.0:
- DRAG source code update
- DRAG ramdisk update
- Linux update to 3.18.94
- Toolchain updated thanks to @djb77
SuperKernel V3.0.1:
- This kernel can only be used on OREO stock based roms! (no ports)
- Updated kernel source to most recent ERG2 code
- Updated ramdisk to ERG2
- Changed toolchain to google 4.9 for better compatibility
- Updated AIK to 3.3
- Updated f2fs to most recent available
- Updated linux to 3.18.118
- Added battery store mode
- All previous features are included!
SuperKernel V3.0.2:
- Rebuild from scratch to fix some bugs
SuperKernel V3.1.0:
- Source code based on ERH1
- Updated linux to 3.18.120
- Fixed samsungs mismatch in kernel compilation
Q&A
Below I added some basic Q&A stuff which here so hopefully it will answer most of your questions!
Q: How to get into Download Mode?
A: Power off your phone, than hold: home + volume down + power on button until you see the download mode.
Q: How to get into Recovery Mode?
A: Power off your phone, than hold: home + volume up + power on button until you see the recovery mode.
Q: I get verification failed at start up!?!? My phone is broken now?
A: Yes, you have to buy a new phone now. Just kidding You did not disable force encryption in TWRP (how to do so you will find below in how to decrypt your phone).
Q: I get FRP LOCK? WHYYYYYY???
A: Very simple answer, you did not enable OEM Unlock in developer options. Now you need to flash full rom with odin again and start from scratch. But don't forget to enable OEM Unlock this time!
Q: I got FC's and other Problems with the kernel, what to do?
A: Take a logcat for me, developers use to say: without a log, it never happened . A logcat can be grapped with a PC and ADB installed, simply type: adb logcat > log.txt while your phone is connected and the error is happening.
Q: What kind of logs can I provide to help you?
A: Logcat: This one is for general infos about FC's
DMESG: this is for kernel related things
Last_Kmsg: this can be used after a random reboot
Q: How to get logs?
A: 1. Connect your phone to your pc
2. Make sure you got usb debugging enabled
3. Install Minimal ADB tool
4. After install open it and type: adb logcat > logcat.txt, adb shell dmesg > dmesg.log, adb shell cat proc/last_kmsg kmsg.log
5. Send me the file you got
Q: Which devices are supported at the moment?
A: Current supported devices are: SM-G930F/FD/W8. All other exynos models can work but are UNTESTED
Q: Is this kernel working on Snapdragon 820 variants?
A: No, sadly not.
Q: Help, I never had a code and now after installing the rom my phone asks for a password??
A: Your device is still encrypted, on step 0 it tells you to be sure you're not. So, what do you need to to in case you are still encrypted:
1. Boot into TWRP
2. Select Wipe
3. Select wipe data
4. Then you manually need to type "yes" with the keyboard
5. Confirm the wipe (this will remove the encryption)
6. Reboot your recovery
Q: Is there a way to get rid of encryption which is simpler?
A: Not really, you could also wipe data with stock recovery but this is quite a big hassle so above method works better.
Q: On TWRP there is an error about /data mount, what to do?
A: Your device is encrypted, follow the above steps to get rid of your encryption.
Q: Synapse shows no UCI support!
A: Reflash kernel, a script of you may overwrite my synapse config
Q: I want to switch kernel, how?
A: Since we have systemless xposed and systemless supersu, we have patches in ramdisk of boot.img. This means you have to reflash xposed and supersu after every change of kernel!.
Q: I lost root after installing this rom. What to do?
A: All mods (like supersu, phh's root, xposed and magisk) are stored in /ramdisk of kernel boot.img. So if you flash this rom, and after this another kernel (Which has supersu included by default) you can not do much. You have to stick to the two kernels provided in rom. Also when switching kernel, you need to flash all related zips again after changing it. Last tip: Do not use magisk until you really need it for android pay!
Q: I got random reboots, heeelp!
A: This is most likely from a custom kernel, if you face random reboots please check if you have the latest kernel installed or switch back to the stock kernel included in the rom.
Q: My screen is kind of yellow/orange and the touchscreen doesn't work at all!
A: You have chosen the wrong kernel in aroma selection. Reflash the rom without any wipe selecting the right kernel version.
First! DL now and flashing! Thanks for the hard work!
Sent from the silver bullet 930F Running Superman Rom
Will apps like easyHome (https://play.google.com/store/apps/details?id=com.jamworks.easyhome) work? It uses FP as capactive home button.
Flashed and running awesome so far, haven't messed with any of the settings yet though.
Sent from the silver bullet 930F Running Superman Rom
Quickvic30 said:
Flashed and running awesome so far, haven't messed with any of the settings yet though.
Sent from the silver bullet 930F Running Superman Rom
Click to expand...
Click to collapse
Would you be so kind to show antutu benchmark. I just want to see what it improves
Shuuin said:
Would you be so kind to show antutu benchmark. I just want to see what it improves
Click to expand...
Click to collapse
Benchmark doesn't show any hints of real-world results when it comes to kernels..
Sent from my SGP712 using XDA-Developers mobile app
Shuuin said:
Would you be so kind to show antutu benchmark. I just want to see what it improves
Click to expand...
Click to collapse
Here ya go
Sent from the silver bullet 930F Running Superman Rom
Great!!!!Thank you for your works!!!!
Thanks for this kernel. I like the zzmoove governor. But if i choose him on little my phone freezes and than it reboots. At big it's ok
Black_Focus_X said:
Thanks for this kernel. I like the zzmoove governor. But if i choose him on little my phone freezes and than it reboots. At big it's ok
Click to expand...
Click to collapse
Zzmoove does hotplug, but the little cores can't do hotplugging. So it will reboot
Sent with my SM-G930F powered by SuperMan
Tkkg1994 said:
Zzmoove does hotplug, but the little cores can't do hotplugging. So it will reboot
Sent with my SM-G930F powered by SuperMan
Click to expand...
Click to collapse
Any chance that you will add..
1) ARCH_POWER
2) ROW Scheduler
3) Make Power Efficient WorkQueues user-configurable in next version
4) Trim kernel and remove useless debuggers, bloated kernel drivers and so on for making the kernel as slim and battery / performance friendly as possible
5) (Perhaps) configurable C-States (Idle states) ?
Just as some bonus, useful stuff in v2.0?
Sent from my SGP712 using XDA-Developers mobile app
Destroyedbeauty said:
Any chance that you will add..
1) ARCH_POWER
2) ROW Scheduler
3) Make Power Efficient WorkQueues user-configurable in next version
4) Trim kernel and remove useless debuggers, bloated kernel drivers and so on for making the kernel as slim and battery / performance friendly as possible
5) (Perhaps) configurable C-States (Idle states) ?
Just as some bonus, useful stuff in v2.0?
Sent from my SGP712 using XDA-Developers mobile app
Click to expand...
Click to collapse
1. Arch power has been removed on mainstream kernel
2. ROW was my plan as well
3. It is enabled by default, but isn't it already tuneable?
4. This is always my goal
5. Haven't thought about that until now
Sent with my SM-G930F powered by SuperMan
Finally it's come！Will it be implement the FP function to the future build？
---------- Post added at 07:26 AM ---------- Previous post was at 07:24 AM ----------
krogoth said:
Will apps like easyHome (https://play.google.com/store/apps/details?id=com.jamworks.easyhome) work? It uses FP as capactive home button.
Click to expand...
Click to collapse
i don't think so coz it will totally stop the FP SVC when u flash this kernel
Another question. Can you add undervolting?
Tkkg1994 said:
1. Arch power has been removed on mainstream kernel
2. ROW was my plan as well
3. It is enabled by default, but isn't it already tuneable?
4. This is always my goal
5. Haven't thought about that until now
Sent with my SM-G930F powered by SuperMan
Click to expand...
Click to collapse
PowerEfficient WorkQueues seems to revert itself to "Enabled / On" even though I have tried to disable it..
Sent from my SGP712 using XDA-Developers mobile app
Black_Focus_X said:
Another question. Can you add undervolting?
Click to expand...
Click to collapse
I'm using the KTweaker app and it allows me to undervolt.
Sent from the silver bullet 930F Running Superman Rom
Black_Focus_X said:
Another question. Can you add undervolting?
Click to expand...
Click to collapse
Quickvic30 said:
I'm using the KTweaker app and it allows me to undervolt.
Sent from the silver bullet 930F Running Superman Rom
Click to expand...
Click to collapse
Yes it's already in the kernel but not all kernel apps can detect that. Will add stweaks and/or synapse support for this soon
Sent with my SM-G930F powered by SuperMan
Ok. With Kernel Adiutor i don't see it
Mimori Kernel | Stability for performance
For Xperia M
Based on Lineage OS 14.1 source
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Mimori Kernel based on Lineage OS 14.1 source, and included many improvement and optimization on processor, I/O and include some feature for Xperia M / M dual devices that use Marshmallow as base ROM.
Mimori offered kernel performance, stability, smoothness process on cpu and already have full support on NEON, this kernel need kernel configuration app to control this kernel, so try to find kernel configuration app after flash this kernel.
Recommended Kernel Configuration :
- Kernel Adiutor (BETA)
- Device Control
Okay this is several features that i include in this kernel.
This kernel feature is :
Kernel Features
* Linux Kernel Version 3.4.113
* Compatibility with AOSP,CM And LineageOS based ROM [Android 6.0+]
* Added overclock up to 1,4Ghz
* Added Double Tap 2 Wake Feature (Incl. Vibration)
* Added custom CPU Governor : Alucard,Intelliactive,IntelliMM,Lionheart,Adaptive & Blu Active (specially for Blu Active is thanks to @sudokamikaze for him workaround to make it work for linux 3.4.x based kernel)
* Added custom I/O Sched Governor : zen,sio,sioplus,tripndroid,fifo,fiops,vr and maple (specially for maple is thanks to @sudokamikaze for him workaround to make it work for linux 3.4.x based kernel)
* Added custom TCP Modules : Advanced,Bic,Westwood,Hybla,Vegas,Veno,Yeah and more
* Added CPU Voltage Table Control
* Implement Power Efficient Workqueues
* Dynamic management of dirty page writebacks
* Added Interface of Gentle Fair Sleepers, Software CRC and Arch Power (Option Disable by Default)
* Added Frandom Support
* Added Dynamic Fsync 2.0
* Entropy Tweaks
* NEON VFPv4 Optimized (hard)
* Added Intelli Plug v4.0
* Added Intelli Thermal v1.0
* Added F2FS File System Support (Based on Linux 3.4.y Branch) (Working)
* Added EXFAT File System Support (Driver Version v1.2.9) (Need Test)
* Added USB Keyboard Support
* Optimized I/O Sched
* Compiled using GCC 5.4.X Hyper Toolchains
* Updated CVE Patch From LineageOS Kernel Source 20171106
[/LIST]
[/LIST]
How to install :
1. Download Mimori Kernel and install it from recovery mode, use TWRP recovery (TWRP Link)
2. install kernel adiutor from Playstore for kernel configuration (i don't have myself app to control kernel) (Try to use BETA version to get fix for CPU temperature)
3. Final step, let's configure kernel like what you want it :victory: and enjoy my first custom kernel
For download, look at download tab on top of this thread
Thanks to :
@PecanCM [For Kernel Source]
@Alex_Gamer [For Kernel Tester & Troubleshoot]
@thichthat [For DT2W Source]
XDA:DevDB Information
Mimori Kernel For Xperia M, Kernel for the Sony Xperia M
Contributors
Nicklas Van Dam, PecanCM, Alex_Gamer
Source Code: https://github.com/Nicklas373/Mimori-Kernel_MSM8227_LineageOS_14.1
Kernel Special Features: Overclocked, ARMV7 NEON Optimized
Version Information
Status: Stable
Current Stable Version: Seventh Build
Stable Release Date: 2018-02-11
Created 2016-09-03
Last Updated 2018-02-19
Kernel Adiutor OTA Update Information
Now for CyanogenMod And AOSP Based ROM, Hana Kernel Offered OTA Update feature for kernel update using kernel adiutor app for CyanogenMod Based ROM with "download" feature in kernel adiutor.
You can download new build in that menu included ; introduce, kernel feature and changelog update. Now i'm still try to enable it on LineageOS too, i'm just need to wait confirmation from the admin .
For anyone want to install this kernel, can access too using KA. just like normal download and installation for kernel :laugh:
Have fun
Kernel Adiutor Information
For Kernel Adiutor Usage
During new stable version of Kernel Adiutor have problem with CPU temperature, now we should use BETA build from Kernel Adiutor to get fix for that problem.
And for set on boot configuration, i'm not recommended it again , since that only can make kernel error during boot up process.
So set kernel when system is already boot is best option for stability and performance.
If kernel adiutor to hard for configure, then you can try Device Control app to manage your kernel.
This app is almost same like KA but it's little simple and more friendly for configuration
Changelog :
Seventh Build (20180211):
- Fixed some upstream issue
- Upstream to 3.4.113 (REBASE change)
- Fix issue with OTG problem (Recovery or System)
- Updated F2FS to latest 3.4.y and misc fixes
Sixth Build (20180122):
- Updated Kernel Security Patch to 20171106 (Based on MSM8960T Source)
- Change GCC to GCC 5.4.X Hyper Toolchains
- Misc fixes with intelli thermal
- Applied last patch with 3.4.113
- Applied security patch with "KRACKS attacks"
- Removed sdcardfs drivers (not used by device)
- Misc CPU Optimization
- Set readahed to 512kb
- Added GPU optimizations flags
- Improve Hard Floating Point for neon-vfpv4
Fifth Build (20171002):
- Introduce IMAGINE Codename
- Upstream Linux Kernel to 3.4.113 based on git.kernel.org
- Revert change of F2FS (back to old source)
- Revert some optimization change
- Added Maple I/O Sched (specially for maple is thanks to @sudokamikaze for him workaround to make it work for linux 3.4.x based kernel)
- I/O Sched Optimization for SIO and ZEN
- Enable Interface Of Software CRC
- Misc CPU Optimization
- Added some sched optimization
- Disabled USB Fastcharge v1
- Reverting Permissive, Back to Enforcing
- Added Blu Active CPU Governor (specially for Blu Active is thanks to @sudokamikaze for him workaround to make it work for linux 3.4.x based kernel)
- Added Support for Neon VFPv4 With Hard Floating
- Disabled Quick Wake Up Drivers
Fourth Build (20170913):
- Added Optimization on I/O Sched (Improves SSD Speed)
- Misc fixes for conservative governor
- Added F2FS and EXFAT File System Support
- Added Hyper CPU Governor
- Optimized KSM
- Update Intelli Plug to v4.0
- Optimized SLUB
- Set readahed to 256KB
- Added CCACHE for faster kernel building
- Updated CVE Patch (Kernel Security Patch) to 20170826 Based On MSM8960T
- Misc Optimization
- Added Quick Wakeup driver
- BACKPORT F2FS from branch Linux 3.4.y (git.kernel.org)
- Reverting Quick Wakeup Driver
- Added USB Keyboard features
- Updated SDCARDFS Driver
- Misc fixes
Third Build (20170821):
- Little Improvement on CPU Bus Speed
- Added Dynamic Fsync 2.0
- Added Frandom Support
- Added Interface of Gentle Fair Sleepers (Option Disable by Default)
- Misc change on I/O Partitions
- Dynamic management of dirty page writebacks
- Removed "+" Symbol From Kernel Version String
- Implement Power Efficient Workqueues Feature (Enable by Default)
- Revert Alucard CPU Governor to v1.0
- Added Interface of Arch Power Features (Disable by Default)
- Entropy Tweaks
- Build vfp with softfp
- Misc change with cpufreq
- Added Intelli Plug and Intelli Thermal
- Fix Neon VFP
- Upgraded Kernel to 3.4.4
- Change toolchains to Hyper Toolchains GCC 4.9
- Decrease thermal limits to 70c
Second Build (20170817):
- Set kernel as permissive
- Enabling 972Mhz to fix slow response on boot and skipped frequency on system
- Added Custom TCP Congestion
- Added CPU Voltage Control
- Added DT2W Vibration Support
- Added USB Fastcharge v1
- Adapted Some CPU Governor with CPU Freq Table
First Build (20170816):
- INITIAL BUILD
: - Included Custom CPU Governor
- CPU Overclocked to 1.458Mhz
- Using NEON Optimized as VFP
- DT2W Feature
- CPU Optimization Algorithm
- Custom I/O Sched
Kernel Adiutor Configuration
CPU Manager :
CPU Max Frequency : 972Mhz (For Normal Usage) . 1.2Ghz (For Multitasking Usage) & 1.4Ghz (For Hard/Gaming Usage)
CPU Min Frequency : 384Mhz
CPU Governor: Alucard or Interactive (For Normal Usage), Alucard or IntelliMM (For Multitasking Usage) & Lionheart or Intelliactive, Blu Active (For Hard/Gaming Usage)
(Beside that leave it as stock)
Hotplug Manager :
Mpdecision = Disable
Intelli Plug = Enable
Profile = Eco for Performance
(Beside that leave it as stock)
Thermal Manager:
Thermald : Disable
Intelli Thermal : Enable
Core Control : Enable
Frequency Throttle Temperature : 60c
CPU Throttle Temperature : 70c
Thermal Limit Low = 2
(Beside that leave it as stock)
GPU Manager
GPU Max Freq : 400Mhz
GPU Governor : Ondemand or Performance (For Hard Gaming)
I/O Scheduler =
(Leave it as stock)
Misc =
Software CRC Check = Disable
Dynamic Fsync = Disable
Arch Power = Disable (Not really recommended)
Gentle Fair Sleepers = Disable
TCP Congestions = Depends on your need
Option already update during new kernel feature is include
For explanation (cpu hotplug, and i/o sched) check on this thread
CPU Governor : Link- 1 Link-2
I/O Sched : Link
CPU Hotplug :Link - 1 Link - 2
Special Thanks to @gsstudios for guide :laugh:
[INFO] Double Tap 2 Wake & BETA Build
For Double Tap 2 Wake
Try to use kernel adiutor and check in wake tap, after that choose DT2W and enable it using "full'" option and then let's try DT2W features with vibration on mimori kernel
NOTE : BETA Build For Testing (Not Stable)
github/build
For BETA, try to look date for kernel. Find latest one, and anyone can test latest beta if don't want wait for stable update. I can't promise to make fast update for stable source, i don't want to make any problem. so it's better stay at beta and whenever it ready, and it should release on thread :victory:
Thanks.
Garv Maggu said:
Thanks.
Click to expand...
Click to collapse
you're welcome, i'm still working for optimization in armv7 vfpv4 module.
have fun
Updated
New kernel build v1.1 is released with several fix for vfpv4 and neon modules, download link in on download tab.
have try
Great!
Please add dt2w
Niiiice! I was waiting for new release, I'll test it now
Alex_Gamer said:
Niiiice! I was waiting for new release, I'll test it now
Click to expand...
Click to collapse
my laptop is back from service center , and now is time to back :laugh:
romspeed said:
Please add dt2w
Click to expand...
Click to collapse
i will try on next update, it's to hard to add that anyway .
Nicklas Van Dam said:
my laptop is back from service center , and now is time to back :laugh:
Click to expand...
Click to collapse
Good to hear that your laptop its back to rock
Really good work working like a charm
Just one question on my device sound is bursting any particular reason behind that and is that can be controlled through any setting or app
Sent from my SM-J700H using Tapatalk
Kb44994 said:
Really good work working like a charm
Just one question on my device sound is bursting any particular reason behind that and is that can be controlled through any setting or app
Sent from my SM-J700H using Tapatalk
Click to expand...
Click to collapse
sound is bursting? i think i'm not to modified to sound on this kernel, maybe that's from high cpu usage so that's make sound is distortion. i will try to look at sound option.
[EDIT]
Kb44994 said:
Really good work working like a charm
Just one question on my device sound is bursting any particular reason behind that and is that can be controlled through any setting or app
Sent from my SM-J700H using Tapatalk
Click to expand...
Click to collapse
i'm update kernel with clean build and kernel optimilization, i hope that can fix your problem. i'm already compare sound with stock and my kernel. i'm not hear any particular change on sound volume, maybe very little difference, please to wipe dalvik-cache and cache after install this update
Updated
New kernel build v1.2 is released with several clean build for kernel and optimization on kernel compiler to reduce size, download link in on download tab.
have try
Updated
New kernel build v1.3 is released with first stable build , added auto hotplug drivers and more optimization for armv7 and krait processor
download link in on download tab.
have try
! This kernel is based on treble tree,so make sure you are on a treble ROM !
【! From R20 , it only support 4.4 compatible ROM since we are having 4.4 kernel !】
! Some profiles from /vendor will be replaced so if you want to fully uninstall this kernel,just dirty flash your current ROM!
If you are coming from other kernels,better to do a dirty flash on your current ROM to avoid any strange problems.
Nameless Kernel Snapshots Telegram Channel
https://t.me/nameless_zukz2
You can get latest test build here
---------Notice-----------
I can say with certain flashing this kernel is safe at all.Kernel will not go on OC freqs if u dont choose OC freqs by using tools like KA.So in fact u can use this kernel as a non-OC kernel Lol.
But the kernel has a lot of settings that could cause unstable like high OC freqs (2.53/2.46/780/2.0),so its strongly recommend to test the freq you want to use before you set it for daily use.Just lock min and max freq to it and see if theres kernel panic or crashes.If everything is fine,you can choose it for daily use.Or u can try to raise voltage for it and test again.
For every device:
OC 2.26+1.68+624 is stable
For most device:
OC 2.34+1.76+710 is stable
For some device:
OC 2.41+2.0(1.86)+780 is stable
For little device:
OC 2.50+2.0+780 is stable
So if this kernel is good at performance or battery depends on ur settings.Default settings(1.8+1.3+624) prefer battery + smooth.
!!!!!Above all,DONT PLAY PUBG ON OC FREQS IF U DONT HAVE WATER COOLER!!!!!
!!!!!UNDERCLOCK FOR PUBG OR U CAN HARDLY EAT CHICKEN LOL!!!!!
-------------------------------
Feature:
-Big cluster OC 2.5GHz
-Little cluster OC 2GHz
-GPU OC 780mHz
-Intellithermal included
-Modified thermal config included
-Sound control added
-A lot of TCP govs
-Ghostpepper from AKT included(Less heat and better performance)
-Sound control added
-Arch power included
-Fsync control added
-A lot of optimization included
-Touch boost can be switch now(disable by default)
-CPU set 2.15+1.59 as default
-Upstream to 3.18.107
-Background tasks can load on both cpu0 and cpu1
I think you neednt do anything about optimization to this kernel because I have already do my best for it XD
Download here:
https://github.com/xzr467706992/Nameless-Kernel-Release(old)
or
https://androidfilehost.com/?w=files&flid=267763 (new)
Spectrum download:
https://play.google.com/store/apps/details?id=org.frap129.spectrum
https://www.coolapk.com/apk/org.frap129.spectrum
(Chinese)
Flash it and reply this thread if ur phone dosent explode(just a joke)(It should be SAFE)
Source:
https://github.com/xzr467706992/android_kernel_zuk_msm8996
Anykernel repo:
https://github.com/xzr467706992/AnyKernel2
Many thanks to:
@mracar (Help me fix audio problem on z2 pro)
@DD3Boh (This kernel is based on his tree)
@Star_king12 (for awsome works on 4.4 kernel)
@kenny3fcb (for awsome works on 4.4 kernel)
And thanks everyone works on z2 (pro)
From R20 , it only support 4.4 compatible ROM since we are having 4.4 kernel. So go to flash a ROM with 4.4 kernel build in(Latest arrow,aex,etc.),or you ll get problem with video playback and usb.
The latest 3.18 kernel is R19.
R31
Changelog:
- Rebase on CAF "LA.UM.8.4.1.r1-00300-8x98.0"
- Linux 4.4.213
- Merge latest kernel/common
- Update qcacld wlan drivers to "LA.UM.7.6.r1-06700-89xx.0"
- Update simple lmk to v2.25.0
- Increase ZRAM size to 750MB
- Build kernel with clang 10.0.2
- Rebalance cpuset
- Update Anykernel3 and fix error on Android Q system-as-root
- Add msm_irqbalance binary from marlin
- (z2_plus) Restore to original zui touchscreen drivers, fixing touchscreen randomly fails on some devices
- Cleanup some useless commits
- Fix network signal guru not working
- Fix spectrum profile reset after booting
- Fix performance drain after locking screen for a while on some ROM
- Remove OC as it may influence EAS energy balance
- Improve smoothness under mobile data
- Improve app launching time
- Fix up PELT with backports from kernel/common android-4.14
- Move to PELT load tracking for EAS
- Enable iptable ttl target support
- (z2_plus) Add display panel refreshing rate overclock
* Need lock and and unlock (turn screen off and on) after booting or OC wont work.
- Add cpu undervolt
* uv1=undervolt slightly
uv2=undervolt extremely (mostly unstable)
* uv2 can bring about 15% power cost drop down for Kryo HP @ 2.15Ghz
R30
Changelog:
- 4.4.184
- Merge latest caf tag
- Merge kernel/common
- Merge latest qcacld wlan drivers
- Update Clang to 9.0.5
- Update Anykernel2 to Anykernel3
- Move to simple_lmk
- Drop ZRAM size back to 512MB
- Update cpu_input_boost drivers
- Fix some more memleaks
- Support disable FP in latest lineage
- Include sultan's iommu,qos,mdss,cpuidle and many other optimizations
- Upstream f2fs and rapid gc changes
- Allow background tasks load on cpu1
- Slightly optimize touchscreen performance
- Drop z3fold and move back to zsmalloc
- Move back to stock lz4 modules
R29
Changelog:
- 4.4.178
- Rebase on caf's kernel.lnx.4.4.r37-rel branch with latest kernel/common changes merged in
- Update to latest qcacld wlan drivers
- Clang update to 9.0.2
- Gcc update to 9.0.1
- Add hall switch driver
- Upstream f2fs
- F2fs rapid gc support
- Bump up framebuffer boost value of performance profile to 1GHz
- Upstream anxiety io scheduler
- Cleanup defconfig
- Fix log spam on ROMs with hmp perf stack
- Upstream EAS
- Fix some memleaks
- Limit the rate of CPU clock-rate changes
* You can edit it at /sys/module/qcom_cpufreq/parameters
- Boost cpu when lmk decide to kill tasks
* You can edit it at /sys/module/boost_control/parameters/lmk_boost_ms
R28
Change log:
- Update to latest qcacld wlan drivers
- Merge latest caf tag
- Improve idle drain slightly
- Fix USB tethering really
- Remove unused livedisplay drivers
- Underclock cpu on suspend
* You can edit the frequencies in /sys/module/cpufreq/parameters
* Underclock 307mhz+307mhz on suspend for battery profile and 1.0ghz+0.8ghz for balance profile
- Add shenqi_nv support
- Clang 9.0.1
- Improve fp speed slightly
- Remove init.qcom.sh in ramdisk patches and move changes into init.nameless.sh
- More cpufreq and io schedulers bring in
- Boost cpu when launch apps (You can edit boost duration at /sys/module/boost_control/parameters/app_launch_boost_ms)
*Default set 500 for balance and 1500 for performance and gaming.
- Move back to old sound drivers so that low sound problem maibe fixed.(Still not sure if this is the real problem)
R27
Change log:
- 4.4.176
- Fix -4℃ in KA
(But the cpu temperature is still not accurate because KA is reading a wrong sensor)
- Improve standby.
- Enable iowait_boost.
- Move to dynamic stune boost(Improve battery slightly)
- Updated thermal config
- Move init.spectrum.sh to /vendor/bin
- Fix broken sound in wechat videoplayback&Tik Tok
- Fix phone's mic when headphoes are plugged in
* Thanks to yaro's source
- Encryption (maibe) fixed(ROM support needed)
- Speaker gain is back
- Applied some upstreams from kernel/common
R26
Change log:
- 4.4.174
- Latest caf tag
- Latest qcacld drivers
- Upstream f2fs
- Update fp drivers with yaro's one
- Add support for spectrum
- Support sultan's boost.And you can control it at /sys/module/boost_control/parameters
- Battery improved a lot (at least for me)(About -12%/h under wifi with performance profile on normal usage)
- Fix broken bt,fp and other sensors on aosip,pe etc.
- Switch to mount factory as vendor.
( If you are on a ROM with vendor mount as vendor,what you need to do is
1. Flash twrp with factory support( https://androidfilehost.com/?fid=11410963190603913223 )
2. Flash vendor2factory ( https://androidfilehost.com/?fid=962187416754475514 )
3. Flash nameless and it ll work.
*Dont flash v2f after flashing the kernel,otherwise spectrum wont work and vendor ramdisk wont be updated.
)
*If you are coming from other kernels,better to do a dirty flash on your current ROM to avoid any strange problems.
Spectrum profiles:
cpubigmax+cpulittlemax+gpumax+gpumin+schedtune.boost-value+sultan-boot-big+sultan-boost-little
Balance(Default):1.8+1.3+510+180+1+0.5+0.8
Performance:2.15+1.59+624+180+10+0.4+0.6
Battery:1.4+1.0+401+180+1+0+0
Gaming:1.6+1.4+510+315+10+0.8+0.8 (For stable pubg experience)
Spectrum download:
https://play.google.com/store/apps/details?id=org.frap129.spectrum
https://www.coolapk.com/apk/org.frap129.spectrum
(Chinese)
* Reep for hmp build because its dead.Switch to R23.1 or R24 if you love it.(I rebase hmp build on eas ,but R25 seems not booting,so its time to stop maintain it)
R25
Change log:
- 4.4.172
- Build with clang 8.0.7+gcc9
- Latest caf tag merged in
- Lastest qcacld wlan driver included
- f2fs upstreamed
- Add some memleaks fixes
- tcp partly backported from mainline
- cfq partly backported from mainline
- z3fold support
- memlat support
- upstreamed eas
- vdso patches included
- Switch to aosp's lmk
- Switch to yaro's fpc1020 drivers
R24
Change log:
- Rebase on 4.4.169 with latest caf tags
- Remove all unnecessary changes and upstreams
- Performance seems better than last build
- Fix booting on z2 pro
R23.1
Change log:
- Fix error when booting on hmp build
- Tweak EAS boost values for longer SOT and less heat
R23
Change log:
- Upstream to 4.4.166
- qcacld drivers updated
- Add support for irq balance
- Switch to android clang 8.0.5 and gcc 8.2
- Frame buffer boost disabled by default on hmp builds for longer SOT
R22
Change log:
- Upstream to 4.4.164
- EAS build available
R21
Change log:
- Enable lz4 for zram
- Sultan's fb boost enabled
- Charging problem fixed
* You can control sultan's boost yourself by editing files under /sys/module/boost_control/parameters
R20.1
Change log:
- Upstream to 4.4.163
- Build with LiuNian clang 8
- See github for more
R20:
Change log:
- Linux version 4.4.162
- Works on 4.4 compatible ROM only (ROMs with 4.4 kernel build in)
R19:
Change log:
-Upstream to 3.18.124
-Latest caf tags merged in
-HZ=300
-Improve stability on high load
-See more on github
R18
Change log:
-Upstream to 3.18.120
-Latest caf tags merged in
-Upstreamed some drivers
-Double click wake up enable by default(Works on P)
-Add support for hugepage but disabled by default
-Add support for ksm but disabled by default
*If your ROM is build with lineage trees in zuk-devs,hugepage will be enabled if your device have 6GB RAM and KSM will be enabled if your device have 3GB RAM.
-You can see gpu go 100mHz when theres no load this time
-Current information update every 5s
-See github for more changes
*If you are on Pie ROM with volte working.Flash R18[Volte] build or you ll lose volte after rebooting.
R17
Change log:
-Upstream to 3.18.115
-Include a safetynet patch (need test)
-Added an interface to adjust cpu max freq after screen off(in interactive gov)
-Interface to turn on/off cpu input boost
-Dynamic fsync included
-Gpu min freq now down to 180mHz
-Wireguard included
-Latest caf tag merged
-Latest qcacld driver merged
-Performance improve
R16
Change log:
-Build with DragonTC
-Performance improve
-Upstream to 3.18.110
-Latest source merged
-Faster boot-up speed(than last build lol)
-Back to use 2.15+1.59 as default
R15
Change log:
-Revert something that can cause unstable
-Undervolt for less heat(May cause panic on some device when benching, use voltage control to raise voltage if u meet that)
-Some upstreams
R14
Change log:
-Upstream to 3.18.108
-A lot of hotplugs included(Not recommend enable it on our kryo but u can have a try)
-Intellithermal removed because seems that it doesnt work.
-Use another sound control driver those problem may fixed
R13
Change log:
-Merge latest caf tag
-Use more proper freq table
-Use more proper values for Gpu
-Check if supported before flashing
-Use stock voltage for cpu to fix panic on some device when benching
R12
Change log:
-Upstream to 3.18.107
-Now cpus will not boost to OC freqs when device is booting and I lock it to a lower freq so there will less heat when booting but a bit slower than last version.So OC is quite safe now,cpu OC only when u select an OC freq,u can use this kernel as a non-OC kernel now Lol.
-Fix panic when booting on some bad devices.
-Big cluster OC 2.53 GHz now(Really unstable,I can only stay seconds on it with raising voltage to 1.25v (using voltage control).Hope some lucky guys could have a bench on it Lol.
!!!And do not use this freq for daily use!!!)
-Little cluster 1.86GHz added.
-“Performance” gov have got no performance now(because of those things before so lock min freq to max if u want to use something like performance gov)
R11
Change log:
-Undervolt a bit
-Upstream to 3.18.106
-Latest source merged
-USB fast charge added
R10.5
Change log:
-Fix voltage problem cause by a oversight
-Really less heat on this build because a ****ing problem is fixed Lol
R10
Change log:
-Fix audio on z2 pro
-Switch to GCC 7
-Underclock 1.8+1.3 as default
-Voltage control added
-Intellithermal added
-Fsync control added
-Sound control works
R9
Change log:
-Fix boot problem on aex0416 build
#Old tree with /factory mounting as /vendor is not supported now#
R8
Change log:
-Darkness added
-maple added
-New thermal conf added with less heat
-LMK back to stock
Nameless Kernel R7
Change log:
-Fix lagging cause by LMK
-Upstream to 3.18.105
-ElementalX added
-Zen I/O gov added
-A lot of network I/O gov enabled (westwood default)
-Set gpu 624mhz as default
-Raise voltage for little cluster 1996mhz and gpu 780mhz,it should be more stable now.
Nameless Kernel R6.5
-Not really a new build
Change log:
-Fix performance on AEX5.4.
Try this if u feel performance on aex5.4 is a ****
Nameless Kernel R6
for z2 plus and z2 pro
change log:
-Sound control added
-GPU now OC 780mHz
-GPU minimal frequency up to 214 mHz so it will be more smooth (Like recent UI)
-Added 1689 mHz for little cluster
-Lower voltage for non-OC frequencies for less heat
-Raise voltage for OC frequencies for stable
-Merge latest source for z2 pro from cosmedd's repo so sound problem should be fixed.
Nice, time to bomb Z2 plus up already its Summer Time Madness lol
Just Kidding, XD
Nice work.. lack of custom kernel for our device is now gone thanks to you.. I'll try when i flash treble rom but thank you anyway..
Am I dreaming? *0*
How is the battery life on this rom?
lolnwl said:
How is the battery life on this rom?
Click to expand...
Click to collapse
It is not a ROM !
It is a kernel .
Can someone give a review of batter performance of this kernel on aex, i am currently on non treble rom can't try the kernel
That 2.4 oc is bad really bad its unstable for the device
MtBlackstar said:
That 2.4 oc is bad really bad its unstable for the device
Click to expand...
Click to collapse
So I lock it down to 2.15 as default.You can choose 2.2/2.3 as you like.
Is voltage control available? And I think there're too little steps above the stock frequencies, and did you modified GhostPepper to include all the OC frequencies?
pipyakas said:
Is voltage control available? And I think there're too little steps above the stock frequencies, and did you modified GhostPepper to include all the OC frequencies?
Click to expand...
Click to collapse
No voltage control.Ghostpepper has modified.
If possible to have sound control would be nice :silly::good:
Can we have a nogut version please?
xzr467706992 said:
! This kernel is based on treble tree,so make sure you are on a treble ROM(AEX,cosmic....) !
! Some profiles from /vendor will be replaced so if u dont trust me,backup /vendor before flashing!
Feature:
-Big cluster OC 2.46GHz
-Little cluster OC 2GHz
-GPU OC 710mHz
(sdm 835 Lol)
-Ghostpepper from AKT included(Less heat and better performance)
-Adreno idler included
-Arch power included
-A lot of optimization included
-Touch boost can be switch now(disable by default)(Merge from A.R.Beast)
-CPU set 2.15+1.59 as default
-Background tasks can load on both cpu0 and cpu1
-Upstream to 3.18.102
I think you neednt do anything about optimization to this kernel because I have already do my best for it XD
Download here:
https://github.com/xzr467706992/Nameless-Kernel-Release
Flash it and reply this thread if ur phone dosent explode(just a joke)(It should be SAFE)
Source:
https://github.com/xzr467706992/android_kernel_zuk_msm8996_plus
Anykernel repo:
https://github.com/xzr467706992/AnyKernel2
Click to expand...
Click to collapse
What do you mean by ghostpepper included, is it active by default or we must activated from kernel auditor?
bordi21 said:
What do you mean by ghostpepper included, is it active by default or we must activated from kernel auditor?
Click to expand...
Click to collapse
1.Ghostpepper is an akt profile.
2.Active by default
xzr467706992 said:
1.Ghostpepper is an akt profile.
2.Active by default
Click to expand...
Click to collapse
Thx for the answer and the kernel, I have tried it and the oc is not stable, 2.5 GHz is a little to much )) at least for my device.
bordi21 said:
Thx for the answer and the kernel, I have tried it and the oc is not stable, 2.5 GHz is a little to much )) at least for my device.
Click to expand...
Click to collapse
For me it is stable Lol.You meet kernel panic?How unstable?
And u can use lower OC freq
xzr467706992 said:
For me it is stable Lol.You meet kernel panic?How unstable?
And u can use lower OC freq
Click to expand...
Click to collapse
I mean force restart
Welcome to The HeliosPro Kernel Thread for Galaxy J7 2016
Built with Various Oreo 7870 Source
Linaro GCC 6.1.1
Warning : Me nor XDA Are responsible for any damage that might be caused after flashing any file provided here. Please take caution and be aware of what you are doing. And Always backup !
-- Features --
[x]Fake Enforcing (Permissive and shows enforcing)
[x]Compiled with Linaro6.1.1
[x]Native BlueLight Filter To J710X Panel
[x]ADB Insecure
[x]Fake KNOX
[x]Private Mod support
[x]MultiCPU Governors
[x]Multi I/O Schedulers
[x]Multi TCP Algorithms
[x]Limited Wakelocks
[x]Dynamic Fsync 2.0
[x]Fsync
[x]PowerSuspend 1.5
[x]UKSM V1.23
[x]Boeffla wakelock blocker v1.1.0
[x]StateNotifier & SysfsHelper
[x]Optimized ZSwap
[x]Optimized Deadline I/O
[x]Better Input Booster
[x]Quicker Doze entry
[x]Other improvments for Batterylife and performance
[x]Support Android 8.0/8.1
[x]WireGaurd Support
[x]CPU VoltageControl
[x]CPU OC upto 1700MHz
[x]GPU OC Upto 1146MHz
[x]GCC 6/7 Support
[x]CRC Disabled by default
[x]Reduced Wakelocks
[x]GPU/CPU Voltage dropped
[x]Improved GPU Utilization
[x]Improved standby
[x]Adoptable SD patched
[x]Deodex oreo support
[x]Many ram improvments
[x]No sim breaking with 8.1 rooting
[x]Encryption Support for StockRoms
[x]And many more listed in changelogs below
[x]Pre-Rooted
The kernel comes included with EliteTuner to control various kernel parts.
--How to install--
If you have flashed Root through any means other than magisk, Please uninstall it (SuperSU>Full unroot)
Open developer options (Press aboutphone > build number 7 times) Enable OEM Unlock
Flash TWRP Recovery that can be found in J710 Section
Fully Wipe internal storage and format data (Must for first time flashing TWRP)
Copy Kernel to your desired Location
Install Zip > Select kernel.zip
Reboot and wait
First time rooting, Open magisk app Once to ensure root is working
--Basic Info --
This kernel is mainly for users who want more than just root, As permissive allows for more flexibility with some of the mods found on xda
You are free to use this kernel in any future rom aslong as you Link this thread / Github Source
-- Credits --
@ananjaser1211 for this golden kernel and adding support for our device.
@BlackMesa123 and @corsicanu for working with my projects
@topjonhuw For Magisk
@geiti94 For Wifi password Fix
@Noxxxious For general helpAnd my Elite-Team for their contributions to my projects and being Awesome.
Download <> Changelog <> More info In second Post
Github Source : https://github.com/ananjaser1211/Helios_7870
XDA:DevDB Information
HeliosPro Kernel V2.6, Kernel for the Samsung Galaxy J7
Contributors
mohitmallick17, AnanJaser1211, corsicanu
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: V2.6
Stable Release Date: 2019-02-27
Created 2019-02-27
Last Updated 2019-02-27
HeliosPro V2.6 Update
This is TOUCHWIZ only. The new compiler greatly improves performance on both 8.0 and 8.1 Based roms.
Enjoy, i know im not making any roms due to time, but i can support this kernel.
Changelog :-
- Native BlueLight Filter To J710X Panel
- Compiled with Linaro 6.1.1 Compiler
- Performance and battery greatly improved with new compiler
- Fixed custom ramdisk scripts
- Deodex Supported well with magisk
- GMS Blocker
- 99Killer service (kills gms in idle for better sleep)
- NFC Should work now
- More precise cpu voltage
- Magisk 18.1 Included
Follow the Full change log on the Github source.
Download : Google Drive
Size : 29.1MB
HeliosPro Kernel V2.5
Android 8.0/8.1 Only
J710F/FN/G/M/MN/GM (And any J7(6) variant)
Changelog :-
-Supports both 8.0 and 8.1.1 Stock/Ported TouchWiz Roms
- Updated drivers to latest J530F 8.1 Source
- Adoptable Storage (not tested)
- Encryption Support (on stock roms only)
- Improvements to GPU CPU Over clocking Thanks @renoxtv
- Ensure you have LATEST TWRP otherwise you wont be able to read Internal storage in TWRP
- Removed 160mhz GPU as it didnt work and caused issues
- Fixed CPU Undervolting (overvolting doesnt work well)
- GPU overclocking and Control now works on EliteTuner
- Updated Camera and WiFi to latest 8.1 Firmware
- Magisk 17.2 Included
- some other minor improvements to pretty much everything
Follow the Full change log on the Github source.
old changelog
HeliosPro Kernel V2.0
Android 8.0/8.1 Only
J710F/FN/G/M (And any J7(6) variant)
This can be used on any of my 8.0 Roms and tested on stock 8.1 Rom (does not break Simcard when rooting)
its based off multiple exynos7870 sources
P.S : GPU overclocking is not yet completed, you can use it manually with OxygenControl app
instead of EliteTuner app (included in zip)
HeliosPro v2.0 Changelog
- CPU Overclock upto 1.7GHz and VoltageControl
- GPU OverClock Upto 1146GHz
- Memory Mangment improvments
- MMC improvments
- Full Wakelock Control for wlan/bt and much more
- BoefflaWakelock Blocker With preconfigured WLs
- UKSM V1.2.3
- SecBattery control and Unstable current detection
- Powersuspend Driver for display
- Fsync Toggle
- Dynamic FSync
- Tons of I/O Schedulers
- Tons of CPU Governors
- StateNotifier Driver
- CPUFreq optimizations
- DisplayState hooks
- ondemand/conservative cache improvments
- Swap/VNSwap improvments
- WireGuard Support
- F2FS Support
- Frandom Support
- Muted useless debug msgs
- Tons other than can be tracked in commits
I/O Schedulers :-
- Maple
- BFQ
- ROW
- Fifo
- Fiops
- Sio
- SioPlus
- Tripandroid
- VR
- ZEN
CPU Governors :-
- Blu_Active
- CafActive
- hyper
- bioshock
- cultivation
- dancedance
- electrodemand
- impulse
- intellidemand
- ondemandX
- pegasusq
- smartass2
- smartmax
- wheatly2
Source : Github
RefinedKernel (7.0/7.1.1)
V2.7
-WireGuard Support
-HotSpot Fix for Note 8 port
-CPU Boot frequency reduced
-GPU/CPU Frequency improvments
-InputBooster Changes
-Boosted charging limit
-Updated Ramdisk
-Magisk 16.3 included
---------------------------------
V 2.6
-CPU/GPU Overclocking support
-Support for more variants
-Fixed Magisk resetprop conflict
-Disabled DM-Verity from source
-Fixed KNOX 0X0 PATCH
-Removed Audit Spams in log
-Disabled Samsung RMM
-Disabled RKP/KAP/TIMA From source
-Slight increase to charging current
-Inputbooster ~ 1.2GHz
-CPU OC upto 1700MHz
-GPU OC Upto 1146MHz
-Allow CPU To go as low as 200MHz
---------------------------------
-V2.5
-Magisk V15.2
-Dynamic Fsync 2.0
-HTC Asynchronous Fsync
-PowerSuspend 1.5
-UKSM V1.23
-Boeffla wakelock blocker v1.1.0
-StateNotifier & SysfsHelper
-Optimized ZSwap
-Optimized Deadline I/O
-Better Input Booster
-Quicker Doze entry
-Other improvments for Batterylife and performance
----------------------------------------------------
-V2.0 Note 8 port
Rebuilt the kernel from latest source code : J530FXXU1AQI3
Added CPU Governors
Added I/O Sched
Added TCP Algorithms
Added FakeKnox
Added ResetProp
Added 7.1.1 Support
Added CPU Improvments
Reduced Wakelocks
----------------------------------------------------
-V1.0 Initial release
F.A.QQ : What benefits Does this have over stock kernel ?
A : This kernel is aimed at Android enthusiasts who like to get the most out of their phones. But also is user friendly and pre customized for the average user to figure it out
Q : Can i use Kernel Auditor ?
A : Yes, but to utilized the full potential of this kernel including overclock and many more, you should use EliteTuner included in the ZIP
Q : What is Overclocking ?
A : Basically, Slightly more performance For an extra consumption in battery. you can google it for more details
Q : Why is CRC disabled by default ?
A : The extra operations can cause a big hit on Block performance
Q : Is it safe to overclock ?
A : ive tested the kernel on the Max over clock setting (Without turning off the 4 big cores) without any problems for a month
Q : What is SamsungHotplug ?
A : its a feature from samsung that Auto-Disables Inactive Big Cores to reduce power consumption
Q : Why i cant See/set Big cores frequency?
A : thats due to hotplug removing the sysfs files that control the frequency and overwrite them by stock values
Q : Does this kernel Pass SafteyNet ?
A : Yes, The kernel has all the needed bypasses already so it can even bypass safteynet without Magisk
Q : Can i use Knox Apps ?
A : No, You cant use secure Storage, However it has PirvateMode Support built in (if your ROM supports it too)
Q : Can i use this on Stock Rom ?
A : Yes, it works on both Stock and Custom (including 8.0/8.1 Ports)
Q : What is the MAX mAH i can charge at ?
A : charging limits are changed from 1A to 1.5A
--- Reserved ---
--- Reserved ---
WoW. Good Job!
And first comment
how to turn on the blue filter? Stock rom 8.1
alik23kz said:
how to turn on the blue filter? Stock rom 8.1
Click to expand...
Click to collapse
Simple. All you need to do is to push the BlueLightFilter apk from a supported rom 8.0/8.1 to priv-app and make a reboot. Add the toggle for it, or launch it via activity launcher.
Good kernel i installed in oreo fusion
Reset?
I am using Oreo Fusion, do I still need to factory reset or wipe my data?
chechemon said:
I am using Oreo Fusion, do I still need to factory reset or wipe my data?
Click to expand...
Click to collapse
No. You don't need to wipe data or factory reset.
Just flash it!
---------- Post added at 03:19 PM ---------- Previous post was at 02:36 PM ----------
This kernel is good for fix the bluelight filter on OreoFusion Rom. It really fixes it.
chechemon said:
I am using Oreo Fusion, do I still need to factory reset or wipe my data?
Click to expand...
Click to collapse
Flash and done
Can anyone please guide me to compile kernal for nethunter please andr also tell me from which i take source kernal for j710f and the compile it for nethunter
Iam using stock oreo rom 8.1.0 from samsung. I have rooted my phone with magisk and have installed oxygen kernel. Do i have to wipe data and flash this kernel or just flash it.
Sulltan Mehmood said:
Iam using stock oreo rom 8.1.0 from samsung. I have rooted my phone with magisk and have installed oxygen kernel. Do i have to wipe data and flash this kernel or just flash it.
Click to expand...
Click to collapse
Just flash it!
No one is replying me what the heck is that
please also we want a version for AOSP
Kindly update to version 2.7 as it is already released for j7 pro
Kindly compile it to work with some external wifi adapter(WLAN1) and enable ralink drivers please.
I want to use NetHunter with J710F.
Please enable these features kindly, request to OP.
Also port some goodies from oxygen kernel e-g spectrum, new kernel from source and gpu voltage and others please a humble request.. also make sure to increase battery timing with efficient performance with lowest consumption of battery.