[Q] Wireless Charging Stopped Working?!? - T-Mobile Samsung Galaxy Note 3

OK, goes wtihout saying (but I'm saying anyway) that any assistance in troubleshooting this would be greatly appreciated.
Have the official Sammy wireless charging back cover and a few Tylt VU stands. The phone was wirelessly charging like a champ for months. Then, one day I put the phone on the Tylt and... nothing. The phone did not recognize the charger and the charger light cycled between a 2 second steady green, a red flash, and then a 2 second steady red. There were no hard drops of the phone on the day it just stopped working. Nadda. Nothing. Which is actually surprising since I have a 3 year old and a 9 month old. I can confirm that the Tylt chargers themselves didn't start pushing up daisies all on the same day because they still work just fine with my wife's S5, also with an official Sammy charging cover.
Here are the steps I've tried to fix/find the issue...
Reboot the phone
Different Tylt VU
Pull battery, wait a while
Pull cover, re-seat
Pull cover, raise contacts in phone with a pin
Wipe and re-install ROM
Threaten to kick the dog
If I put the back cover on the stand by itself (no phone) I get the same exact sequence of error flashes from the Tylt. No clue what this means. Does anyone know how to test the back cover itself to see if it is still working as expected? I have a multi-meter, but not sure what pins to check at what setting

Very Interesting! AND annoying. Exact same thing happened with me from last few days. I thought it was a problem with my Mudder coil as my Lumia 920 was charging properly. I then ordered a Samsung official s-view charging case. Hope it is not something that's broken.
I fear it is too much of a coincidence for same wireless charging problems for 2 different random phones.
GaryParr said:
OK, goes wtihout saying (but I'm saying anyway) that any assistance in troubleshooting this would be greatly appreciated.
Have the official Sammy wireless charging back cover and a few Tylt VU stands. The phone was wirelessly charging like a champ for months. Then, one day I put the phone on the Tylt and... nothing. The phone did not recognize the charger and the charger light cycled between a 2 second steady green, a red flash, and then a 2 second steady red. There were no hard drops of the phone on the day it just stopped working. Nadda. Nothing. Which is actually surprising since I have a 3 year old and a 9 month old. I can confirm that the Tylt chargers themselves didn't start pushing up daisies all on the same day because they still work just fine with my wife's S5, also with an official Sammy charging cover.
Here are the steps I've tried to fix/find the issue...
Reboot the phone
Different Tylt VU
Pull battery, wait a while
Pull cover, re-seat
Pull cover, raise contacts in phone with a pin
Wipe and re-install ROM
Threaten to kick the dog
If I put the back cover on the stand by itself (no phone) I get the same exact sequence of error flashes from the Tylt. No clue what this means. Does anyone know how to test the back cover itself to see if it is still working as expected? I have a multi-meter, but not sure what pins to check at what setting
Click to expand...
Click to collapse

GaryParr said:
OK, goes wtihout saying (but I'm saying anyway) that any assistance in troubleshooting this would be greatly appreciated.
Have the official Sammy wireless charging back cover and a few Tylt VU stands. The phone was wirelessly charging like a champ for months. Then, one day I put the phone on the Tylt and... nothing. The phone did not recognize the charger and the charger light cycled between a 2 second steady green, a red flash, and then a 2 second steady red. There were no hard drops of the phone on the day it just stopped working. Nadda. Nothing. Which is actually surprising since I have a 3 year old and a 9 month old. I can confirm that the Tylt chargers themselves didn't start pushing up daisies all on the same day because they still work just fine with my wife's S5, also with an official Sammy charging cover.
Here are the steps I've tried to fix/find the issue...
Reboot the phone
Different Tylt VU
Pull battery, wait a while
Pull cover, re-seat
Pull cover, raise contacts in phone with a pin
Wipe and re-install ROM
Threaten to kick the dog
If I put the back cover on the stand by itself (no phone) I get the same exact sequence of error flashes from the Tylt. No clue what this means. Does anyone know how to test the back cover itself to see if it is still working as expected? I have a multi-meter, but not sure what pins to check at what setting
Click to expand...
Click to collapse
It's possible the coil in the charging cover has developed an issue. Did you contact tylt about that led pattern? It might mean something.
If all else fails, check on amazon; the are tons of inexpensive (under 10 dollar) wireless charging pads you can but one and try it with the stock cover and see if it works. If so, your coil in the sammy cover has bit the dust.
Sent from my leanKernel 3.5 powered stock 4.4.2 (NF4) SM-N900T

Related

Galaxy Nexus Won't Charge

Hey Guys,
Over the last year or so I've had intermittent charging issues with my Galaxy Nexus. About 4 months ago is when it first started happening, the phone would either not charge or only charge when it is turned off. Somehow the issue was resolved through tons of troubleshooting, I'm not even sure what fixed it or why it started working again.
Same thing happened about 2 weeks ago, except this time it won't charge at all. Then 2 days later all of a sudden started charging again. Now it's happening again today, I have no idea what is going on or why this handset won't charge properly. The phone won't turn on with just the charger in and the battery out either.
I've tried various chargers including the OEM charger, I've tried up to 6 different chargers and 7 seperate micro-USB B cords. Nothing. I've tried a brand new battery that a friend bought for his phone before he threw it in and no results.
At this point I think it's the USB charger board, however I'm not sure why it would not work and then work again. Does anyone have any ideas or any solutions? I've read thousands of threads on this, from this forum and many others and have gone through some ridiculous troubleshooting methods.
SCH-I515 Korean Version.
Seriously, anyhelp is appreciated.
As of now, all of a sudden it will charge while it's off. But only to about 4% then it just stops charging. It will not charge while it is on at all.
Because it's getting worse and worse?
Relock bootloader, and return it in for warranty, if you can. I'm afraid there's not much help if you already checked for damage to the USB port.
sent from my Google Galaxy Nexus
hi
had the same problem until a few minutes ago.
received my usb/charging flex part today and changed it just before to post here.
took me like 20 min, really easy to do, everything works perfectly and i also took time to clean up a bit the phone inside of some dirts and change the housing i bought with the flex part.
As my screen is under protection since the beginning (4 months old), and that i recently bought a 2000mah battery, well i have to say that i have a new phone ready to handle the new year easily!
operation is easy and you will find plenty of videos on youtube showing how to change the usb flex (7€/$ , +/-) so pretty cheap.
Good luck
Why not buy an external battery charger and a spare battery?
Sent from my Galaxy Nexus using xda app-developers app
I'd get a replacement daughterboard and switch it out yourself. It's easy dude, just like a previous poster already said. I just did it myself, took me all of 20 minutes and cost me $10. ifixit.com has a step by step direction sheet, if you have any questions feel free to contact me about it.
Try the following:
1.) Turn off your phone.
2.) Get a flat head screwdriver (small one)
3.) Push the flat connector inside the microusb port up. (It often gets bent downwards because it's so thin compared to other phones...)
4.) Boot into the bootloader
5.) Hit volume down until restart bootloader appears. Press power button.
6.) Start phone manually.
farshad525hou said:
Try the following:
1.) Turn off your phone.
2.) Get a flat head screwdriver (small one)
3.) Push the flat connector inside the microusb port up. (It often gets bent downwards because it's so thin compared to other phones...)
4.) Boot into the bootloader
5.) Hit volume down until restart bootloader appears. Press power button.
6.) Start phone manually.
Click to expand...
Click to collapse
i dont know why, but this fixed it for me, for a short while. now the charging is intermittent and seems to come and go as it pleases.
Hi,
I had the same problem of ghost charging, it started with phone not charging when connected to charger and then randomly showing charging...
Now discovered it causes vbus_tuna_otg wake lock, resulting in high system usage in settings> battery and not letting phone go to deep sleep, causing battery drain.
Sent from my Galaxy Nexus using Tapatalk 2
Same Problem
I've come into the same problem with my Galaxy Nexus as well. If my phone is turned on, my phone will recognize that a charger is plugged in but the battery will not charge at all. If the phone is off and plugged in, the charging screen won't appear. I've tried multiple chargers and cords, 2 different batteries, and even replaced the micro usb and board, but the problem hasn't changed at all. I've managed to charge my batteries with an external charger but would like to get my phone back to normal working condition. Does anyone think that changing the actual motherboard itself might solve the problem?
Sayword said:
I've come into the same problem with my Galaxy Nexus as well. If my phone is turned on, my phone will recognize that a charger is plugged in but the battery will not charge at all. If the phone is off and plugged in, the charging screen won't appear. I've tried multiple chargers and cords, 2 different batteries, and even replaced the micro usb and board, but the problem hasn't changed at all. I've managed to charge my batteries with an external charger but would like to get my phone back to normal working condition. Does anyone think that changing the actual motherboard itself might solve the problem?
Click to expand...
Click to collapse
I had this problem before, using something small and flat to push the charging connector off the housing will work for awhile. The pin in the charging port is bent down and is very thin it's easy to lift up just use a tiny bit of force to lift it up. The pin touching the housing is causing a short and that is causing your no charge while it's on and mine even went as far as draining my battery very quickly. I did research and found alot of people having this issue on the gnex. I eventually had to turn mine in for replacement, no problems since. Hopefully yours is still under warranty or you can buy the peice that is broken and replace yourself, there is a post above saying what to do for that.
Looks like my phone developed this problem. It sometimes won't charge be it via my pogo dock or USB cord. It seems to start taking a charge after I pop out the battery and then put it back in. I'm going to order another battery and see if that is the problem.
Thank yoiu!!
solved my problem!! I am in your debt
popping the battery out just worked for me too
hlaalu said:
Looks like my phone developed this problem. It sometimes won't charge be it via my pogo dock or USB cord. It seems to start taking a charge after I pop out the battery and then put it back in. I'm going to order another battery and see if that is the problem.
Click to expand...
Click to collapse
I just did the remove battery trick as well and it worked. I just noticed my battery not charging yesterday but figured it was because I was trying to use a different charging in my dad's car. got to work where i left my normal charger and no luck.
thefayeride said:
I just did the remove battery trick as well and it worked. I just noticed my battery not charging yesterday but figured it was because I was trying to use a different charging in my dad's car. got to work where i left my normal charger and no luck.
Click to expand...
Click to collapse
That's good, I tried it a few times but the issue still pops up. To be fair though, I've had this phone and battery since launch day... Almost three years old. I ordered a new battery so hopefully I won't have the issue anymore... And I won't be surprised if my battery life is a little better too.
Sent from my Nexus 10 using Tapatalk 2
hlaalu said:
That's good, I tried it a few times but the issue still pops up. To be fair though, I've had this phone and battery since launch day... Almost three years old. I ordered a new battery so hopefully I won't have the issue anymore... And I won't be surprised if my battery life is a little better too.
Sent from my Nexus 10 using Tapatalk 2
Click to expand...
Click to collapse
The Galaxy Nexus is nowhere near three years old. Your phone would be 18 months old if you had it since launch.
Sent from my Nexus 7 using Tapatalk HD
Excuse me, two years. According to Samsung their lithium batteries have a life of about 500 cycles. So my point is still valid, my battery is probably just on it's way out. I'll find out for sure when my new one comes tomorrow.
Sent from my Nexus 10 using Tapatalk 2
Yeah, since battery life hasn't exactly been the strong point of the GN and some of us had to go though a complete cycle daily, I suspect a lot of folks are going to be seeing more and more issues. Not too long ago, I had a battery that failed in such a way that it would randomly crash the phone and had to be pulled in order to allow a reboot. I would've suspected anything but the battery in that case.
Sent from my SCH-I545 using Tapatalk 2
farshad525hou said:
Try the following:
1.) Turn off your phone.
2.) Get a flat head screwdriver (small one)
3.) Push the flat connector inside the microusb port up. (It often gets bent downwards because it's so thin compared to other phones...)
4.) Boot into the bootloader
5.) Hit volume down until restart bootloader appears. Press power button.
6.) Start phone manually.
Click to expand...
Click to collapse
This kind of worked for me, but the "boot into bootloader and restart it" killed my phone, don't know why. After a lot of a hassle i got it on, with 2% left, again not charging...tried to repush the connector towards the center and now i cant get my charger into the phone, maybe overbend it...what to do?...
I have a strange problem, my Gnex does not charge the battery, first i thought that it was the battery so, I tested the battery on other phone and it charged just fine, and then i ordered the usb/charging assemble from ebay and replaced on my gnex, and still not charging the battery, but when i connect the phone to the pc it recognize it immediately, but still won't charge the battery, anybody has an idea of what my problem is?? and how can i solve it?
Please help!!!

[Q] Ghost Is Using My Gnex!!! Help!

Okay, gonna try and explain this as best I can, bear with me.
2.5 years ago or something I got a Gnex from Verizon, brand new. The phone would act like a ghost was using it, like someone was interacting with the touchscreen. It'd randomly call contacts, send texts (random letters/numbers), all kinds of weird stuff. Video of it on day 1 HERE doing this. Took it into Verizon, got a new replacement. Never had the problem again. 2 or so years go by, not a single problem, unlocked, flash, all that, never had the problem again.
About a month ago, I upgraded to a Moto X and passed this phone on to a family member. At the time was running the latest stable Cyanogenmod ROM, the last for JB. 10.2 maybe? Anyway, that's what ROM was on it, again, no problems. Factory reset the phone to wipe my stuff, left it rooted and unlocked. I gave them the phone, battery, extended battery, and a few cases as well, no charger cause I know they'd twist up and destroy the factory cable. Setting the phone up for them battery starts going low, used their charger. Cable had shorts and crap, scavenged around looking for good charger. Get phone set up for them, and I'm done, handed off.
A day later, they're complaining that the phone is going crazy, like a ghost is using it, and it's randomly calling people, sending texts, opening menus, not charging, etc. Sounds like EXACT same issue I had with my very first Gnex that I exchanged. Figured that was really strange, maybe it was the software. Factory reset to latest factory image 4.2.2, lock BL back up, completely bone stock. Re-setup phone and all that jazz. Phone's acting fine. Decided this time that'd I'd let them have the original stock charger, thinking maybe that'd help with the charging issues too. All seems well....
However, during the reset and all, and after re-setting up the phone, battery is low.... plug it in with a known good charger of mine, but not stock original, and all the sudden the phone's freaking out again. Turn screen off, turns itself back on. Dialing people, opening apps on its own, etc. Figure maybe this Gnex just won't take any charger except it's original. Pull battery, reboot, phone's fine, fine for 10+ minutes. Plug in OEM charger this time, wait a few seconds, unplug, phone goes crazy.
Also interesting, they brought another charger of theirs with a little red LED on, plug it into wall, red LED comes on. Interestingly, if the charger is unplugged from wall with red LED off and I plug it into the phone.... the red LED on the wall charger turns on... that's not right. So.... here's where I'm at now. If I pull battery, reboot, and never attach a charger, the phone acts perfectly fine. The instant I plug in ANY charger, it'll start going wacko and continue to until I pull battery and reboot. At first I thought this was a charger issue, but now... I'm thinking it's battery related. This little experiment of getting the phone to go crazy after plugging in a charger applies to both the OEM and extended battery, regardless of what charger I use.
When I owned the phone, I almost exclusively used the OEM charger, occasionally another charger I had that I know works fine. Gave Gnex to family member WITHOUT a charger, so they were forced to use who know what condition phone charger. I'm wondering if maybe some rogue jacked up phone charger with shorts in it and crap somehow killed the extended battery. Then, they switched to the OEM battery, and again, unknowingly killed that battery too with the same crap charger. So maybe buying a new battery would fix the issue and only using the OEM charger from now on or the other one that was mine that I know works? Or maybe the phone is just broken now? It just doesn't seem right that plugging a phone into the micro-USB should turn ON the red LED on the charger when it's not plugged into the wall, like the power is coming out of phone and going into the LED...
I just refuse to believe that on the exact same day and within hours of me upgrading to a Moto X and passing on my Gnex that had worked perfectly for 2 years in my possession somehow just happens to "break" or "go bad" on its own. Thought it was software glitch/bug in CM, no. Thought it was incompatible charger, no. Maybe the batteries are bad? Maybe the phone's circuitry got jacked up too? Just seems weird that, as far as I can tell, pulling the battery and rebooting fixes it for good until the battery dies. Within 30 seconds of connecting a charger, the phone goes bonkers.
Any ideas? Feel bad, family member probably thinks I dumped a bad phone on them!
Thanks!
What kind of sorcery was that? I honestly don't know what to say about this other than bad timing? I highly doubt a ghost is possessing the phone.
I know a ghost isn't possessing the phone, I just, that's how I best described it when it was going wacko by itself. Plus, interesting topic title, maybe get a few more people to read it and maybe offer some advice or info or something :laugh:
However, I do have a ghost in my house, or a spirit or something. I've seen him, sitting on my couch before. He died in a fire, smoke inhalation, no smoke alarms in the house. House was sold, completely rebuilt, and I am first to live in it since then. Crazy story for a different forum lol
From what I can see, it's just that the screen isn't working properly because of leaked currents from the battery or the charger... Just get the whole screen replaced (it's hard to only replace the glass layer) and should be fine.
Sent from Google Nexus 4 @ CM11
Leaking currents, had it happen to me before from a bad charger. I doubt it's the battery, try an outlet in a different house, they may have bad power.
Sent from my Galaxy Nexus using Tapatalk
So this "leaking currents" problem, it's a problem with the battery? A problem with the phone, in particular, the screen? It definitely sounds like a rogue bad charger could have done this based on the feedback so far. The "damage" or whatever happened at their house. Just the other night, they brought the chargers and phone and stuff to my house, a different house, problem persisted. So I'm not thinking it's a dirty power issue or anything.
...and so you should have the screen replaced. I've had Motorola and HTC phones with issues responding to touches when charging, and replacing the screen largely eased the problem (although I still ended up getting a new charger because I don't want it to also damage the newly replaced screen).
Sent from Google Nexus 4 @ CM11
Op may also want to consider relocating... ghost home and ghost phone, that's too much!
LOL
Mike7143 said:
So this "leaking currents" problem, it's a problem with the battery? A problem with the phone, in particular, the screen? It definitely sounds like a rogue bad charger could have done this based on the feedback so far. The "damage" or whatever happened at their house. Just the other night, they brought the chargers and phone and stuff to my house, a different house, problem persisted. So I'm not thinking it's a dirty power issue or anything.
Click to expand...
Click to collapse
Could be the battery, could be the USB cables or chargers, could be the USB port on the device, could be the screen. The fact that it only happens when plugged in but with more than one charger and battery makes me suspect the USB port on the device. From my understanding you can buy a replacement. A temporary fix would be to use a charger that charges the battery outside of the phone.
Sent from my Galaxy Nexus using Tapatalk
No ghost... i think
I think its because the charger you use....
I had the same problem, but not with gnx... before gnx I used galaxy i5801...
when I put my mobile in charge, my mobile did some crazy things, like operating itself,...I figured out that the charger I used is not the one I shouldn't use.
every mobile has a charging limits, like voltage restriction..
little difference in voltage could make big difference.
so I changed the charger. problem solved for me.
other than charger.. there are some things can do this, I don't know about all.
I doubt it may caused by your digitizer...maybe is has too much sensitivity, caused by water, dust, pressure, etc....
digitizer and display are not the same.
I faced this one too ( galaxy i5801) before charging problem, but not with gnx.
A digitizer is the part of a touch screen that senses your touch and "digitizes" your gestures into impulses that the phone can understand as commands.
if it continues my last suggestion.... call the priest
Well, I borrowed an OEM standard and extended battery from a friend, neither fixed the problem. My friend did say that similar to my first Gnex, when he first got his, it did the same exact thing, but after a while it stopped and it hasn't done it ever since. I also narrowed it down, or, widened the issue, in that it's not just AC chargers, the exact same stuff happens with a brand new 12V car charger.
Dirty power on the fifth rail of a USB wire. Its either the charger not supplying enough power or a damaged cable.
Sent from my Galaxy Nexus using Tapatalk
My vote is on the screen, due to the digitiser. Replacing the touchscreen could help solve the problem. I was in your family's position when I got a used Motorola Cliq from a friend and the battery was all good, no leaks. Ghosts just started touching it everywhere like a crazed groupie when it went into my possession. No explanation as to why it happened and I didn't look into it that much but replacing the screen is the most likely solution.

[Q] DOA

Watch has set on the charger for about 4 hours now, and I haven't had a vibrate or screen turn on at all. The charger light on the charging unit turns on, but nothing from the watch at all. Anyone have any suggestions? I'm about to call moto and get it sorted through a probable replacement. Sort of annoyed that the QC is this bad.
Just a couple of quick questions:
(1) I know you said DOA, but I just wanted to clarify that is has never worked, or worked for a little while, then didn't work?
(2) When mine arrived, it had 37% charge and for some reason it didn't charge the first time I plugged the charger in. The light came on, but it wouldn't charge. Strangely enough, I unplugged it from the wall and plugged it back in and then it started charging. I'm not sure why, but just in case you haven't tried that yet, I would try that. I may even have used a different plug.
Make sure it is fully seated in the charger. Is there any warmth on the back of the watch when you remove it from the charger?
Steve-x said:
Make sure it is fully seated in the charger. Is there any warmth on the back of the watch when you remove it from the charger?
Click to expand...
Click to collapse
There is. With the stock charger, it is warm to the touch and the feeling fades with time off the charger.
vansmack said:
Just a couple of quick questions:
(1) I know you said DOA, but I just wanted to clarify that is has never worked, or worked for a little while, then didn't work?
(2) When mine arrived, it had 37% charge and for some reason it didn't charge the first time I plugged the charger in. The light came on, but it wouldn't charge. Strangely enough, I unplugged it from the wall and plugged it back in and then it started charging. I'm not sure why, but just in case you haven't tried that yet, I would try that. I may even have used a different plug.
Click to expand...
Click to collapse
As in DOA, meaning I took it out of the box and attempted to power it on with no vibration, screen lighting or any other form of feedback to indicate it was on. I have tried it with both the stock charger and a charger I use with my M8 that has a higher amp output.
Mine was the same way, totally dead out of the box. But after sitting in the charger for 20 minutes it finally turned itself on and so far seems fine. Maybe yours was just too dead to recover from.
I actually thought mine was DOA as well. Even left it charging overnight with no signs of life. It turns out that I was not pressing the power button hard enough. Once I REALLY pressed the button in for 3+ seconds, it powered right up! Haven't had that issue since then, and the power button now seems to register normal presses just fine.
giant420 said:
I actually thought mine was DOA as well. Even left it charging overnight with no signs of life. It turns out that I was not pressing the power button hard enough. Once I REALLY pressed the button in for 3+ seconds, it powered right up! Haven't had that issue since then, and the power button now seems to register normal presses just fine.
Click to expand...
Click to collapse
I just tried this as well, and had no luck. I think I will call Moto tonight and get this resolved once and for all.
On the one I bought this morning I thought it was DOA until I peeled the plastic circle off the back and placed it on the charger. Did you take the plastic off?
aygriffith said:
On the one I bought this morning I thought it was DOA until I peeled the plastic circle off the back and placed it on the charger. Did you take the plastic off?
Click to expand...
Click to collapse
That I did. Called Motorola support and they will be sending me a new one. Will see if the condition changes before the new one gets here though. It's still sitting on the charger and still getting warm to the touch.
CMNDR said:
That I did. Called Motorola support and they will be sending me a new one. Will see if the condition changes before the new one gets here though. It's still sitting on the charger and still getting warm to the touch.
Click to expand...
Click to collapse
Just to give some final closure for anyone in the future, I recieved the replacement today, and it works just as intended. I think the issue with my other one was that the power switch itself was faulty, as this watch has a much more noticeable firm 'click' when I press it (The other one just sort of softly clicked.) Replacement was sent overnight, and arrived working out of the box. With that said, and after customer service messing up not just the email address, but also my name, I would say that Motorola's support is quite shoddy at best. I just hope they actually reverse the charge on my account for the replacement watch.
I just want to add to this thread, this is exactly the issue I'm seeing with my brand new Moto 360. Just purchased from Best Buy. Took it out of the box, held the power button (as the instructions say) and nothing. I plugged the charger in, unplugged, replugged, etc, no dice. The light on the charger lights up and the watch gets warm. I've let it charge for over an hour, and still have yet to see anything on the screen. The button "clicks" when I press it as opposed to the OP's issue. I guess I'll just take it back and exchange it, just hope this is not the norm with this device.

No Power - Tab S Dead?

So I woke up this morning to find my Tab drained. I plugged it in for half an hour, then when I picked it up I noticed there was no charging indicator (the green liquid battery thing). So I thought maybe I didn't plug it in right. I reattached everything, tested the charger on another device, then plugged it back into the tab for about 2 hours...still no juice. I tried powering on and doing the reset thing. still nothing. I brought it to a Samsung service center and they said I have a faulty motherboard. Now I'm wondering how the hell that happened when I've been using this device for about 6 months (only 6 months) without any issues, no overheating or strange reboots or anything, and now just like that I have a motherboard issue? The kicker here is that they're charging 75% of the tablet price to fix it! What gives?! I purchased it from a non-samsung mall store so they said I can't claim warranty. I popped the back off and did the battery pull thing and tried to charge - still nothing. Did I buy a device that decided it was a lemon after 6 months light-moderate use?
Anyone else have this happen? It's never been dropped or anything and I was on stock firmware with nothing but root.
In the UK, If your tablet goes faulty in 12months your guarantee is with the place you bought it from, not Samsung.
John.
It's ALIVE! I thought I'd get a 2nd opinion on my Tab since the guys at the Samsung service center popped it open anyway. Went to a generic phone repair store, all they did was hook it up to this box thing, and it came back to life! The guy said something got corrupted and just re flashed everything to stock rooted. He charged me less than $20 and I have a working Tab again. Obviously the very first thing I did with my resurrected device was to call Samsung's hotline and report how this one service center was trying to scam me into buying a motherboard that cost nearly as much as what I paid for the thing brand new.
Some li-poly battery have an protection circuit built in, if the voltage falls below a certain level say 2.5volts per cell, it disables the battery, if you connect an meter to the battery you will get 0volts , you need an li-ion charger that passes an higher voltage that resets the battery and allows it to work again, I wonder if this is what happened.
http://batteryuniversity.com/learn/article/low_voltage_cut_off
John.
Did they connect via USB or to the motherboard?
@tinderbox could be...must have over-drained itself for some reason.
@ashyx I couldn't really see what he was doing since his work table was obstructed by a bunch of stuff and he had his back towards me, I just saw him grab this small black box, then minutes later he showed me that the tab was already powering on though couldn't get past samsung logo, then he went ahead and flashed to stock.
Reason I ask is I wonder if he used a jtag box to ressurect it by reflashing the bootloader.
If he did there must be jtag points on the board as it can't usually be done via USB.
Pity you didn't ask what he actually did as I'm intrigued now.
Did the box look like this: riff box
ashyx said:
Reason I ask is I wonder if he used a jtag box to ressurect it by reflashing the bootloader.
If he did there must be jtag points on the board as it can't usually be done via USB.
Pity you didn't ask what he actually did as I'm intrigued now.
Did the box look like this: riff box
Click to expand...
Click to collapse
Yes! but without the markings.:good:
pawces said:
Yes! but without the markings.:good:
Click to expand...
Click to collapse
Exactly the same or just similar?
yeah i think so... it had similar ports, though not sure about the outer shell of it... i think it was smooth all around with no ridges or anything, just a little black rectangular box.
Sorry to revive an old topic, but i thought i'd do an update instead of start a new one. Tab S died again and I'm now convinced it's over-discharge, as I left it at about 20% and forgot to plug it in before going to bed. Woke up with the tab drained, not responding to any button combinations, not charging with any of my chargers that tested ok with other devices.
Instead of bringing it back to the technician, I thought I'd try mcguyvering the damn thing. I opened up the back, pried the battery terminals up off the board, lifted the battery out, and with a spliced USB cord hooked up to a powerbank, I gave the battery terminals a direct zap, inserting the exposed USB wires into the battery terminals. This took some trial and error as, I didn't know which wire was supposed to go where, but finally I saw the powerbank leds blink, indicating it was discharging into something. I held the wires in place for about 5-10 minutes, noticing some heat on the battery by then. I reinstalled the battery back into the tablet, closed everything up and tried charging again and...hey presto! the tab started charging. :victory: Let it charge for 2 hours and powered on like nothing happened.
disclaimer:
I don't recommend you defibrillate your device's battery unless you know exactly what you're doing and are fully aware of the risks. (I didn't know what I was doing at the time but I was so frustrated at that point I didn't mind if the battery blew up in my face.)
Mine just dead last night while CHARGING (turned off at 13%).....
And refused to turn on till now (still charging and both warm (charger + tab)...
I even plugged an ampere meter to really know if its drawing any or not (it is, at 5.2V 1.7A for 15mins)...
And still no luck
Samsung's device become more ****ty each generations..... Esp the battery...
This one is the replacement batt they gave me after 2mos of usage for infamous Tab S battery issue...
I saw a video on youtube, a guy had a dead 10.5" T1 he took the back off and connected an 1amp microusb charger pcb to connections directly to the battery under a piece a tape, I bought a couple of the microusb charger pcb`s from ebay for 0.42p each in case mine goes dead.
EDIT: I found the video.
https://www.youtube.com/watch?v=BRTgLGrzNz0
John.
pawces said:
Sorry to revive an old topic, but i thought i'd do an update instead of start a new one. Tab S died again and I'm now convinced it's over-discharge, as I left it at about 20% and forgot to plug it in before going to bed. Woke up with the tab drained, not responding to any button combinations, not charging with any of my chargers that tested ok with other devices.
Instead of bringing it back to the technician, I thought I'd try mcguyvering the damn thing. I opened up the back, pried the battery terminals up off the board, lifted the battery out, and with a spliced USB cord hooked up to a powerbank, I gave the battery terminals a direct zap, inserting the exposed USB wires into the battery terminals. This took some trial and error as, I didn't know which wire was supposed to go where, but finally I saw the powerbank leds blink, indicating it was discharging into something. I held the wires in place for about 5-10 minutes, noticing some heat on the battery by then. I reinstalled the battery back into the tablet, closed everything up and tried charging again and...hey presto! the tab started charging. :victory: Let it charge for 2 hours and powered on like nothing happened.
disclaimer:
I don't recommend you defibrillate your device's battery unless you know exactly what you're doing and are fully aware of the risks. (I didn't know what I was doing at the time but I was so frustrated at that point I didn't mind if the battery blew up in my face.)
Click to expand...
Click to collapse
Crescendo Xenomorph said:
And still no luck
Samsung's device become more ****ty each generations..... Esp the battery...
This one is the replacement batt they gave me after 2mos of usage for infamous Tab S battery issue...
Click to expand...
Click to collapse
Samsung tablets only have issue with battery connectors. The white connector with 6 wires has loose connection, the black connector soldered to mainboard has cracked solder joints. New battery won't solve problem if you don't fix these two flaws. Resolder the battery connector will fix most of problems: not charging, reboot, flickering, auto shutdown.
I posted more details in the threat: flickering screen.
so the problem is Samdung's QC....
anyway no more somedung, I switched to Xiaomi Mi Mix, still preordering from China.....
You have to watch these chinies owened tablet and phone manufactues, they have been found to come with built in spyware, sending copys of all your texts ect back to china, it`s been in the news that last few day`s
Lenovo notebooks had a spyware app and Lenovo had to issue insturctions on hot to remove it once it was found.
John.
Crescendo Xenomorph said:
so the problem is Samdung's QC....
anyway no more somedung, I switched to Xiaomi Mi Mix, still preordering from China.....
Click to expand...
Click to collapse
That's OK, I can scan and remove all those spyware.
Still its better to have it properly supported with actual updates (older phone still got all UI + android update, hello MIUI 8).
Rather than using phone without proper software support....
Tab S - buggy and prolly the last MM update
Note 3 - useless LL update, very unstable, consider alpha
Note 8.0 - buggy last KK update, switched to CM13 and happy with it

[SOLVED][Hardware Issue] Phone not charging

JUMP TO SOLUTION
Hi everyone,
My phone (almost 2 years old, changed LCD for three times) started to lose a lot of its battery capacity from a month ago, and since yesterday I realized something's wrong with it, as it had some trouble charging the battery. At first, I was using my phone and its battery was around 20%, and then as soon as I connected the charger (genuine fast charge) it turned off and the red LED indicator kept turning on and off and refused to charge. then after a reboot, it started charging again, and then I left it charging at the night and at the morning I realized it only charged to 60% and the red LED didn't turn on at all. And now that all the battery is drowned out it's not charging at all and drawing no current from the charger ([email protected]).
Has anyone had any experience with it before? Is this a battery problem or the USB charging port flex cable which has some ICs on it (example)?
I'd appreciate your answers.
I can't tell from your story that you tried another charger ? I recall a similar charging issue from my HTC One X a few years back.
Replaced the charger and all issues disappeared.
Mr Hofs said:
I can't tell from your story that you tried another charger ? I recall a similar charging issue from my HTC One X a few years back.
Replaced the charger and all issues disappeared.
Click to expand...
Click to collapse
Yes I have, Also seconds before it ran out completely I tried to check if adb works. connected it to my laptop and on the bootloader mode the adb recognized the device but the red LED didn't light up.
m.m.m said:
Yes I have, Also seconds before it ran out completely I tried to check if adb works. connected it to my laptop and on the bootloader mode the adb recognized the device but the red LED didn't light up.
Click to expand...
Click to collapse
That's correct because a device doesn't charge in bootloader mode. Only off state, running OS or Dr TWRP recovery.
If you tried a different charger it can be pretty much only down to hardware, can't give any advice at that level.
Mr Hofs said:
That's correct because a device doesn't charge in bootloader mode. Only off state, running OS or Dr TWRP recovery.
If you tried a different charger it can be pretty much only down to hardware, can't give any advice at that level.
Click to expand...
Click to collapse
Oops, I meant recovery mode.
does the device charge in the stock recovery?
m.m.m said:
Oops, I meant recovery mode.
does the device charge in the stock recovery?
Click to expand...
Click to collapse
I'm afraid not, only the custom one.
I had almost the same problem with my phone. I sent it to a repair center and acording to their report, the circuit which is responsible for the monitoring of the charging process had a loose connection. Maybe because I dropped the phone a few times. Unfortunatly the circuits of modern phones are all on the same circuit board, so they had to change the whole motherboard of the phone. But now everything works fine.
So I just opened the phone and disconnect/reconnected the battery connector and it eventually started charging with the stock charger, but it charged up to 60% and then stopped. retried the same steps and no luck this time. then I tried charging the battery with an external li-ion charger (I know it's a dangerous task )
this time it charged up to 4.11 volts and then I turned on the phone and again the battery dropped to 60%. so I believe the battery is really dead and needs replacement. I'll update you when I replace it.
KingGong said:
I had almost the same problem with my phone. I sent it to a repair center and acording to their report, the circuit which is responsible for the monitoring of the charging process had a loose connection. Maybe because I dropped the phone a few times. Unfortunatly the circuits of modern phones are all on the same circuit board, so they had to change the whole motherboard of the phone. But now everything works fine.
Click to expand...
Click to collapse
Turns out I was wrong, my case was similar to yours. had to waste $9 on a battery to find out
it just fixed by disconnecting/reconnecting the USB connector bottom of the board, but I don't know how the flex cable for the back button got cut so now I have to replace the whole bottom circuit ($17 approx.) :crying:
m.m.m said:
Turns out I was wrong, my case was similar to yours. had to waste $9 on a battery to find out
it just fixed by disconnecting/reconnecting the USB connector bottom of the board, but I don't know how the flex cable for the back button got cut so now I have to replace the whole bottom circuit ($17 approx.) :crying:
Click to expand...
Click to collapse
So I went through the hurdle of replacing my battery and charge port, and the battery transplant went well, went from 70% to 100% battery health (yay!).
The first charge port I purchased (this is all eBay stuff) had a busted Recents button (copper trace in ribbon cable was nicked - when the part was removed from original phone for sure), so I complained and got a replacement; second one works well.
And because all bad things come in threes, the phone developed an echo (on the opposite side of the conversation) which I think I caused by ripping a bit of the mic rubber isolator which points towards the mic hole in the battery cover.
I believe I fixed it (still testing) by glueing some foam padding on the backside of the mic (on the charge port PCB, facing the battery cover).
Long story short, opening up the phone is a b###h, so do multiple repairs together, be careful not to break anything else (easier said....).
Good luck, let us know how it went.
So here's an update, First of all, I'm pretty happy with the battery replacement, It can hold like 10 hours of my usage while the old one could handle up to 6-8 lately, it's unbranded, and I got it from a local phone part store.
Second, the replacement for the charger flex turned out to be pretty good quality, and I've had no problems with it so far. I got it for $11 from AliExpress, but now it's about $10.5. But when I replaced everything and tried to reassemble the phone and tighten the screws it showed up with charging problems again, and I tried disassemble/reassembling the phone and reconnecting the charger flex, and the next time it charged but with no fast charge, so in the next try I also tried cleaning the flex connector with cleaning alcohol, and for the third try it finally started charging with no problems.
So now after like 2 weeks, it's had no problems so far.

Categories

Resources