hey guys i brought something new iv'e been working on.my personal kernel based off of chonix's (jhonnyx) updated trinity kernelwhy should you use this compared to anything else?:
1: For fun
2: It has every overclock option i can pack into it,including:
"core" overclocking from ezekeels live oc
GPU oc from imoseyon
IVA oc ported from dtrails razr kernel <-a first for gnex as i know
CPU oc from morfic
3: It includes its own hotplug driver:will tisdale's generic arm hotplugging driver which performs better than intelliplug in my testing
4: it has actual hard coded voltages,smartreflex isnt even built in the kernel
5: it has ziyan's (daniels) new ram timings which give even better memory bandwidth
6: it has scu speculative line fills and full zero mode enabled for the processor <-NO DOUBLE LINEFILL
7: it has the 3.10 wifi drivers courtesy of jhonnyx
8: it uses TEUV voltages
9: the con kalivas linux patchset that no other gnex kernel uses,courtesy of poondog
10: the pvr governor ang gpu oc have been modifed to work with each other
other than that,its just one more modded to sh*t gnex kernel,but its mine and i want to share it as it gives me great battery and performance and its unique
i listen to requests,if there is something you want,speak up and we will talk about it :good:
btw,dont start any "this runs better than kernelx" bs here. thats disrespectful.
if you have a problem,dont get angry,write a post and we will troubleshoot
I AM NOT RESPONSIBLE FOR ANY DAMAGE YOU DO TO YOUR DEVICE,YOU LOADED THE KERNEL.
i will NOT enable the double linefill from mpokang,mwisbest clearly showed everyone it cause memory corruption.
(clearly im not good with op's)
and my thanks go out to everyone on xda as there are way too many people for me to credit,thank all of you very very very much for your hard work.
XDA:DevDB Information
NukedTrinity, Kernel for the Samsung Galaxy Nexus
Contributors
pattyboi
Kernel Special Features: Auto-hotplug,GPU governor+OC,Ram/bus oc,IVA OC,CPU OC,ck1 patchset
Version Information
Status: Beta
Created 2014-08-22
Last Updated 2014-11-02
Bro, you're back!!! That's wonderful, i'm installing new kernel asap!
pianistaPL said:
Bro, you're back!!! That's wonderful, i'm installing new kernel asap!
Click to expand...
Click to collapse
yes sir i am & great!
pattyboi:) said:
yes sir i am & great!
Click to expand...
Click to collapse
Oh, wait, is this unified f2fs&ext4 version? Because i need f2fs kernel.
pianistaPL said:
Oh, wait, is this unified f2fs&ext4 version? Because i need f2fs kernel.
Click to expand...
Click to collapse
yesh its anykernel and has f2fs :3 im using it with fml f2fs right now
Sorry but i can´t find the link for download? Am i just stupid or does it not exist yet?
Fatsodonkey said:
Sorry but i can´t find the link for download? Am i just stupid or does it not exist yet?
Click to expand...
Click to collapse
Downloads tab on approx top left just above the thread name
Nice to see you back m8!
Fatsodonkey said:
Sorry but i can´t find the link for download? Am i just stupid or does it not exist yet?
Click to expand...
Click to collapse
If you use Tapatalk, you must choose Web view from top right of page item!
Very fast and smooth with hotplug. Maybe you could add more governor ?
It is not usable on 4.3 JB Roms!
Quite serious bug. The phone is not really turned off, but still on and the display is off. Can't turn it on again except by pull the battery. Im on latest spaceparanoid
eternal70 said:
Quite serious bug. The phone is not really turned off, but still on and the display is off. Can't turn it on again except by pull the battery. Im on latest spaceparanoid
Click to expand...
Click to collapse
looking into that as we speak,thank you!
aliesz said:
It is not usable on 4.3 JB Roms!
Click to expand...
Click to collapse
i think i know how to fix this,sorry bout that,its cause of selinux :/
freshgiammi said:
Nice to see you back m8!
Click to expand...
Click to collapse
thanks buddy
Never thought I'd be able to try a Trinity kernel again on the GNex Will test in a few. Thanks pattyboi!
sivaseraphim said:
Never thought I'd be able to try a Trinity kernel again on the GNex Will test in a few. Thanks @Pattyboi!
Click to expand...
Click to collapse
you might wanna hold off,bout to fix that power off bug that was reported,since thats critical im gonna update so just wait :3
Alrighty! *tail wagging*
alright,new builds is up bugs "should" be fixed
pattyboi:) said:
alright,new builds is up bugs "should" be fixed
Click to expand...
Click to collapse
Has the bug for 4.3 JB android been also fixed ?!
Related
Hi here I back for an updated kernel.
Since I am the kernel developer for Galaxy R and both machines are using tegra2 CPU. I hope that I can re-use the techniques to enhance the kernel for both devices.
I know that I don't own this device (instead, I own a Galaxy R). So, please forgive me!
I have prepared a kernel for i927 that is CWM flashable, below is the change log:
v1.2 (2012-02-13)
=============
- Happy Valentines day!
- Fix counter for 3G/wifi data usage (now, you can monitor your usage using common software like 3G watchdog, etc)
- Performance increased by introducing some memory copy macros and functions
- Speed up framebuffer copy
Download:
Version: v1.2
File: i927-boot-ardatdat_v1.2.zip
MD5: EBC6653C05B73954C3045AD1FD655B9E
Link: http://www.mediafire.com/?khvgh266jl06a19
v1.1 (2012-01-28)
=============
- For Samsung Captivate Glide only
- CWM flashable
- Rooted (if you have no su in /system/bin/, this kernel will help to put it there)
- Execute any scripts located in /system/etc/init.d/ during boot
- Still, it is OC to 1.2Ghz
Download:
Version: v1.1
File: i927-boot-ardatdat_v1.1.zip
MD5: 833DDEFC7B28191B1AB20D71F3E81CE3
Link: http://www.mediafire.com/?ypcac6q34uyyc61
I will further update and enhance this kernel. Thanks vil33 for asking me to prepare it and help to test it and thanks CarpeNoctem for the continuous support. Thanks.
Next step: OC to 1.35Ghz ; add more CPU governors ; add VR/SIO I/O Scheduler ; more & more
working fine! I have tried some init.d scripts and they execute upon boot. Will try more....
Thanks man, do you mind if I include it in my rom ?
CarpeNoctem said:
Thanks man, do you mind if I include it in my rom ?
Click to expand...
Click to collapse
Yes of course!
Nice to have my name mentioned
ardatdat said:
Yes of course!
Nice to have my name mentioned
Click to expand...
Click to collapse
It normal man, you helped a lot and I am using your kernel since day 1
This kernel is fantastic, using it as my daily driver now. Thanks for your work.
CarpeNoctem said:
It normal man, you helped a lot and I am using your kernel since day 1
Click to expand...
Click to collapse
yes, I know. Thanks for your support
I took the plunge and installed your kernel. Everything seems to be working fine. I can finally use Droidwall and TiBu again!
Thanks for your work!
is UV going to be implemented on the next release??
This is gonna be so kewl!!!!
Want to ask if 3g data counter works fine in this device?
If it is not working / counting correctly, I could help to fix the bug in the kernel. Thanks.
ardatdat said:
Want to ask if 3g data counter works fine in this device?
If it is not working / counting correctly, I could help to fix the bug in the kernel. Thanks.
Click to expand...
Click to collapse
a report is spotted here.
gabby131 said:
a report is spotted here.
Click to expand...
Click to collapse
I can back up the fact that 3g monitoring isn't working on stock or custom kernels.
ardatdat said:
Want to ask if 3g data counter works fine in this device?
If it is not working / counting correctly, I could help to fix the bug in the kernel. Thanks.
Click to expand...
Click to collapse
I'm having issues with 3g and data when i use "[ROM][30/01/12] i927(r)_2.01.30_OsiMood - Light gets Lighter" had to go to my backup what other info do you need from me.
Never mind stupid user error. Coming over from an old winmo phone and haven't crested the learning curve yet
Pls Check
http://forum.xda-developers.com/showpost.php?p=22190230&postcount=99 and
http://forum.xda-developers.com/showpost.php?p=22196311&postcount=101
I flashed Kernel and now my phone is LOCKED again..
Not sure how it is related.
Can someone help me.. I do not want to pay huge money again for Unlocking again.
VinayS said:
Can someone help me.. I do not want to pay huge money again for Unlocking again.
Click to expand...
Click to collapse
Try re-entering the code that was given to you for unlocking. But in most cases, this should not be occuring....
Updated version v1.2 in post #1 !
Now, fix 3G/wifi data counter. Please help to test it
ardatdat said:
Updated version v1.2 in post #1 !
Now, fix 3G/wifi data counter. Please help to test it
Click to expand...
Click to collapse
thanks very much! I will do testing on this one but will take me some time for the 3G/Wi-Fi fix, I really don't use such apps, but i just downloaded 3g watchdog...
BTW: the PREEMPT is 02/13/2012 @18:55:43, you made it before valentines
VinayS said:
Pls Check
http://forum.xda-developers.com/showpost.php?p=22190230&postcount=99 and
http://forum.xda-developers.com/showpost.php?p=22196311&postcount=101
I flashed Kernel and now my phone is LOCKED again..
Not sure how it is related.
Can someone help me.. I do not want to pay huge money again for Unlocking again.
Click to expand...
Click to collapse
I can confirm that the previous version will cause locked again.
is it fixed in the updated version?
and is this kernel carrierIQ free?
joshua_tam said:
I can confirm that the previous version will cause locked again.
is it fixed in the updated version?
and is this kernel carrierIQ free?
Click to expand...
Click to collapse
Yes, carrierIQ free
The issue of 'locked' is strange, and should not be occurring... Does everyone experiencing this? If this really occurs on you, then, you may need to use back the stock kernel.
just wanted to throw in some quick feedback..
1. loving the kernel.. hoping for 1.35oc
2. works perfectly with cranium so far..
3. never relocked my phone
so thanks for your hard work
may blessings be showered upon your head
Here's a test cm7 kernel I fixed a few bugs that smartass2 gave me so I will be posting the test kernels that I make here plus the nightly builds will be posted here to keep the cm7 thread spam free etc.
Credits: Alquez, Cyanogenmod, DrowningChild
NOTE: These kernels and nightlys are based on alquez sources he has gave me permission to make the nightlys while he is doing exams and keeping himself in his missus good books
Nightlys:
Nightly's
Flash this kernel after flashing latest nightly for some reason it didnt go into the update.zip package
kernel.zip
For nightly change logs go here:
http://cm-nightlies.appspot.com/?device=liberty
If you wish to donate to keep me up on the coffee that would be very kind of you my donation link is here*
http://forum.xda-developers.com/donatetome.php?u=3520901
*half of all donations will also be passed on to Alquez as well
Kernels
Kernel v1
http://juniorwebdevs.co.uk/wfs/kernel-test.zip
Kernel v2
http://juniorwebdevs.co.uk/wfs/kernelV2.zip
Kernel V3
http://www.box.com/s/49a792abb95591d63738
Change Log
Kernel v2
change log:
Added Govenors
+Brazilianwaz
+MinMax
+Scary
+Smoothass
+SavagedZen
+InteractiveX
+Powersave
Updated Govenors
SmartassV2
Added Schedulers
+VR
+Simple i/o
Kernel v3
Added Govenors
+Lazy
+Intellidemand
+Lionheart
+Lulzactive
Updated Scheduler
BFQ v2-rc1
Thx just what I needed. I'll test the kernel and keep you updated on how it goes
Marvel Custom
Is there a changelog available somewhere?
Btw, I too noticed one small issue with smartass2. Maybe it's the same as the one you found?
When playing music, I noticed a fair amount of skipping when the screen switches off. I initially thought it was the player, the dsp manager, etc. Finally, I came to the conclusion that the governor was the issue. Using CPUSpy, I found smartass2 scaled the cpu to 320MHz when playing music with the screen off. When I changed the minimum CPU speed to 400MHz, the skipping went away.
Was this the issue that you noticed or is this isolated to my phone?
Edit: Will try out your kernel and see if that issue persists. And test the kernel
Flashed the kernel. Doesn't seem to fix this particular issue. If you could somehow implement a fix for this particular issue, it woulde be great!
Will continue testing and let you know how it goes.
Just reporting, one thing I noticed is that 3 of my apps were broken after flashing the new kernel but reinstalling them brought them back to the original state.
new test kernel will be up soon i updated the cpu govenors and add a few more for users to test to see what should stay and what should be removed
quick q: will nightlys be available through rom manager update?
Accelerometer
Hi! Im testing your kernel right now, will post results later.
I have a slightly offtopic question but it's a kernel question.
I have myself a T-mobile Wildfire S wich uses a different hardware form the European Version, the only problem with it is that the accelrometer doesn't work with custom Roms (I've red Alquez said it's a kernel problem).
I wanted to ask you for any tips to star fixing it, I have programming and linux experience but I wouldn't know where to start. Any ideas?
Thanks again, keep up the good work!
does this works with any ROM or only with cm7 rom?
*se-nsei. said:
quick q: will nightlys be available through rom manager update?
Click to expand...
Click to collapse
Yes they should be i will ask Alquez to see what he thinks to get the go ahead
baqtor said:
Hi! Im testing your kernel right now, will post results later.
I have a slightly offtopic question but it's a kernel question.
I have myself a T-mobile Wildfire S wich uses a different hardware form the European Version, the only problem with it is that the accelrometer doesn't work with custom Roms (I've red Alquez said it's a kernel problem).
I wanted to ask you for any tips to star fixing it, I have programming and linux experience but I wouldn't know where to start. Any ideas?
Thanks again, keep up the good work!
Click to expand...
Click to collapse
For the it sounds like a driver issue are you on a CDMA device with this kernel if so what works and what doesnt work?
effry said:
does this works with any ROM or only with cm7 rom?
Click to expand...
Click to collapse
You can try it on your current rom to see if it works just have a backup just in case
Sent from my HTC Wildfire S using xda premium
eoghan2t7 said:
Yes they should be i will ask Alquez to see what he thinks to get the go ahead
For the it sounds like a driver issue are you on a CDMA device with this kernel if so what works and what doesnt work?
Click to expand...
Click to collapse
It's a gsm device, everything works fine except for the accelerometer.
Sent from my HTC Wildfire using XDA App
baqtor said:
It's a gsm device, everything works fine except for the accelerometer.
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
Have you got a link to your stock rom?
Sent from my HTC Wildfire S using xda premium
eoghan2t7 said:
Have you got a link to your stock rom?
Sent from my HTC Wildfire S using xda premium
Click to expand...
Click to collapse
Right now I'm using this rom and the accelerometer works perfectly, do you still need a link to the stock rom?
http://forum.xda-developers.com/showthread.php?t=1316130&highlight=usa
baqtor said:
Right now I'm using this rom and the accelerometer works perfectly, do you still need a link to the stock rom?
http://forum.xda-developers.com/showthread.php?t=1316130&highlight=usa
Click to expand...
Click to collapse
no that will do thanks
tried on http://forum.xda-developers.com/showthread.php?t=1479002 and does not work, the phone boots but remains freezed on homescreen
effry said:
tried on http://forum.xda-developers.com/showthread.php?t=1479002 and does not work, the phone boots but remains freezed on homescreen
Click to expand...
Click to collapse
no problem i will download the stock kernel during the week to compile one with the goveners etc for stock roms
test 2 kernel will be uploaded soon once the cpu is more resonsive i will start the nightly compiling
Will it include the qualcomm hw3d acceleration enabled? In that case, is the change noticeable? Does it accelerates only 3d or also 2d, video?
Also, do you recommend using a swap partition?
yes it includes the qualcomm hw3d acceleration
Q&A for [KERNEL][AGNi][STOCK] 19-10-2014 AGNi pureSTOCK N7100 (ULTRA SMOOTH)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
deleted
hello,
is it possible to compile the "android-keyboard-gadget" mod in this kernel? or tutorial?
https://github(dot)com/pelya/android-keyboard-gadget
thank you in advance
ps: sorry for my bad English
Hi,why i cant use this kernel since 4.2.8. First boot working,but after entering homescreen it reboots and stuck in samsung logo. But works ok on 4.2.7 to all previous. Im on old botloader. thanks.
Sent from my GT-N7100 using Tapatalk
dollyaja said:
Hi,why i cant use this kernel since 4.2.8. First boot working,but after entering homescreen it reboots and stuck in samsung logo. But works ok on 4.2.7 to all previous. Im on old botloader. thanks.
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
Try to reset all settings in AGNi Control app and clean init.d folder. Then flash 4.2.9 and mali blobs (the old ones).
fx-raziel said:
hello,
is it possible to compile the "android-keyboard-gadget" mod in this kernel? or tutorial?
https://github.com/pelya/android-keyboard-gadget
thank you in advance
ps: sorry for my bad English
Click to expand...
Click to collapse
will hav a look
psndna88 said:
will hav a look
Click to expand...
Click to collapse
Thank you in advance , keep us informed , please
ps: sorry for my bad English
squicky said:
Try to reset all settings in AGNi Control app and clean init.d folder. Then flash 4.2.9 and mali blobs (the old ones).
Click to expand...
Click to collapse
Just did. Still having same issue. Well..i guess ill stick with 4.2.5 sunce its the most stable one for me. Thanks anyway mate
Sent from my GT-N7100 using Tapatalk
i think i have clue for sod issue
fx-raziel said:
hello,
is it possible to compile the "android-keyboard-gadget" mod in this kernel? or tutorial?
https://github(dot)com/pelya/android-keyboard-gadget
thank you in advance
ps: sorry for my bad English
Click to expand...
Click to collapse
I have it working on my i9300 and i9305 on cm v2.9.0 kernels published on xda.
check threads...
will be made on note 2 shortly.
psndna88 said:
I have it working on my i9300 and i9305 on cm v2.9.0 kernels published on xda.
check threads...
will be made on note 2 shortly.
Click to expand...
Click to collapse
hi, this is good news, thank you
http://forum.xda-developers.com/devdb/project/dl/?id=9185
@psndna88
Hi bro!
What setting should i set in Agni if i want to squeeze the maximum performance w/o worrying about battery life as i have a spare one.
sod
Rom Phoeninx 18.5 problem of sod. With kernel 2.3.9 and 2.4.0 with default settings. Changing gpu min clock and gpu power saving seem ok. But my question is: so I have a very big consumption fo battery?
simona.pisano.70 said:
Rom Phoeninx 18.5 problem of sod. With kernel 2.3.9 and 2.4.0 with default settings. Changing gpu min clock and gpu power saving seem ok. But my question is: so I have a very big consumption fo battery?
Click to expand...
Click to collapse
is that 4.4.2 rom or 4.3 ?
r u using latest version kernel? latest 4.3.0 for 4.4.x roms .....
zeeshanonlyme said:
@psndna88
Hi bro!
What setting should i set in Agni if i want to squeeze the maximum performance w/o worrying about battery life as i have a spare one.
Click to expand...
Click to collapse
gaming profile in agni control.
4.4.2
Simona Pisano - Note 2
simona70 said:
4.4.2
Simona Pisano - Note 2
Click to expand...
Click to collapse
simona.pisano.70 said:
Rom Phoeninx 18.5 problem of sod. With kernel 2.3.9 and 2.4.0 with default settings. Changing gpu min clock and gpu power saving seem ok. But my question is: so I have a very big consumption fo battery?
Click to expand...
Click to collapse
change to a latest 4.4.x rom.... n use latest kernel....
I just upgraded to DN4, which has a Kernel version of 3.0.101-India-v.4.2.5-OC-INTL-KitKat [email protected] #1, from August 16th 2014.
I'd like to try out 4.3 but have the option to flash back later if I find that 4.2.5 was better. However, I don't see it in the Downloads list here, so where can I get it?
jshare said:
I just upgraded to DN4, which has a Kernel version of 3.0.101-India-v.4.2.5-OC-INTL-KitKat [email protected] #1, from August 16th 2014.
I'd like to try out 4.3 but have the option to flash back later if I find that 4.2.5 was better. However, I don't see it in the Downloads list here, so where can I get it?
Click to expand...
Click to collapse
Its on the 1st page kernel thread. Here http://d-h.st/users/psndna88/?fld_id=36625#files
Sent from my GT-N7100 using Tapatalk
dollyaja said:
Its on the 1st page kernel thread. Here http://d-h.st/users/psndna88/?fld_id=36625#files
Click to expand...
Click to collapse
Thanks!
Is there any way I can get it without installing all the adware junk?
Check my thread for Edge version for description.
http://forum.xda-developers.com/s7-edge/development/kernel-jesse-kernel-s7-edge-t3389528
Reserved
Reserved
Thank you for this. Tried flashing it, and I get optimizing apps, then soft reboots and gets stuck on Samsung logo.
I'm sure you'll get it sorted out, but just wanted to help test.
Thanks!
MrKhozam said:
Thank you for this. Tried flashing it, and I get optimizing apps, then soft reboots and gets stuck on Samsung logo.
I'm sure you'll get it sorted out, but just wanted to help test.
Thanks!
Click to expand...
Click to collapse
I don't have a S7 Flat.
But this kernel should work.
Did you flash other custom kernel before?
Some kernels will remove Fingerprint related files to make kernel stable.
So, maybe you should reflash the ROM and then flash this kernel.
Jesse Chan said:
I don't have a S7 Flat.
But this kernel should work.
Did you flash other custom kernel before?
Some kernels will remove Fingerprint related files to make kernel stable.
So, maybe you should reflash the ROM and then flash this kernel.
Click to expand...
Click to collapse
nice work @Jesse,
i will make time today to test this kernel and provide a feedback.
thanks and cheers.
Jesse Chan said:
I don't have a S7 Flat.
But this kernel should work.
Did you flash other custom kernel before?
Some kernels will remove Fingerprint related files to make kernel stable.
So, maybe you should reflash the ROM and then flash this kernel.
Click to expand...
Click to collapse
If I can understand correctly from GIt, You have reduced max core speed?
Didn't flashed myself, since SD is not working yet.
krogoth said:
If I can understand correctly from GIt, You have reduced max core speed?
Didn't flashed myself, since SD is not working yet.
Click to expand...
Click to collapse
I did not reduce max speed, instead, i overclock to 4x2.7GHz.
Jesse Chan said:
I did not reduce max speed, instead, i overclock to 4x2.7GHz.
Click to expand...
Click to collapse
Sweet!
krogoth said:
Sweet!
Click to expand...
Click to collapse
But it is not always stable enough, some will meet black screen problem when Geekbench at about 70%.
(That's partially because S7's unstable power supply and various of ASV levels)
I am working on a algorithm that could automatically determine whether OC or not by ASV level and voltage supply.
MrKhozam said:
Thank you for this. Tried flashing it, and I get optimizing apps, then soft reboots and gets stuck on Samsung logo.
I'm sure you'll get it sorted out, but just wanted to help test.
Thanks!
Click to expand...
Click to collapse
Same here. Will provide logs when I get home.
@Jesse Chan
I'm getting soft reboot too and stuck on samsung logo.
I reinstalled from scratch SupermanRom, so the problem is not my side
Waiting a new build in order to test.
Thanks for you work @ FP.
thebigtross said:
@Jesse Chan
I'm getting soft reboot too and stuck on samsung logo.
I reinstalled from scratch SupermanRom, so the problem is not my side
Waiting a new build in order to test.
Thanks for you work @ FP.
Click to expand...
Click to collapse
Seems i need to switch to G930's ramdisk.
LOL.
I will release a new version with G930's ramdisk in after i fixed SD Card problem.
Thanks for testing.
HEHE i see LOL...
Do you think to be able to realease it today ?
I want to test the 4x2,7
So amazingggg
Best Regards
Jesse Chan said:
Seems i need to switch to G930's ramdisk.
LOL.
I will release a new version with G930's ramdisk in after i fixed SD Card problem.
Thanks for testing.
Click to expand...
Click to collapse
Looks like You Fixed it for EDGE, any chance to provide us 3.1 version with S7 flat ramdisk?
Thanks in advance
krogoth said:
Looks like You Fixed it for EDGE, any chance to provide us 3.1 version with S7 flat ramdisk?
Thanks in advance
Click to expand...
Click to collapse
I will release it tomorrow.
Waiting v0.5 for G930, @Jesse Chan
Pls release v.05 cant wait to try it
Pls release .05
broyza said:
Pls release v.05 cant wait to try it
Click to expand...
Click to collapse
broyza said:
Pls release .05
Click to expand...
Click to collapse
And I thought post(s) of this kind was forbidden. Right?
He will release it when he releases it. Don't force him like this, okey?
Sent from my SGP712 using XDA-Developers mobile app
edit: I don´t have time to maintain two threads.
Look here: https://forum.xda-developers.com/pixel-2-xl/development/17-11-2017-kiriskura-kernel-1-0-0-t3706286
A good source of information about EAS is here:
https://developer.arm.com/-/media/d...on=dd6ee0be-dc48-4fd2-ae39-b14aedad9eed&la=en
and here:
https://developer.arm.com/open-source/energy-aware-scheduling
see also my thread on the U11 forums:
https://forum.xda-developers.com/showpost.php?p=73189268&postcount=2
may be a good read for some something is specific for the U11 EAS integration but it´s worth a read nonetheless
another one
Kernel Version
if you flash the kernel and check kernel version in system settings it will still say taimen. I will change this in the next release. It´s purely cosmetic.
have fun all and a nice evening/day :highfive:
Excellent!!
Oh my god. Your kernel is one of the main reason that made me hesitate whether go to pixel2 or not, and now I'm completely worry-free.
Drink a cup of coffee and have a nice day
Are you going to add a flashable zip method in the near future? TWRP beta 1 is able to flash zips now, so I'm just wondering if you will be updating to zips.
multi_rom_user said:
Are you going to add a flashable zip method in the near future? TWRP beta 1 is able to flash zips now, so I'm just wondering if you will be updating to zips.
Click to expand...
Click to collapse
+1
水攸月羽 said:
Oh my god. Your kernel is one of the main reason that made me hesitate whether go to pixel2 or not, and now I'm completely worry-free.
Drink a cup of coffee and have a nice day
Click to expand...
Click to collapse
sorry I totally missed your post! Thank you!
Have a nice day/evening too!
Update to 1.0.2
hey guys and girls,
little update for the kernel
Changelog:
- upstreamed to 4.4.102
- built touchscreen and battery drivers in the kernel instead of a module
- for other little changes see my github
use the instructions in the op please
Download: https://www.androidfilehost.com/?fid=889964283620769022
or following the link in the op to the correction version
Have fun, enjoy the kernel and your phone.
Donations are not mandatory but very welcome.
If you like my work and want to buy me a coffee: http://paypal.me/freak07
It still says "taimen" in the kernel signature, I assume this is fine?
Thanks for the kernel!
Freak07 said:
hey guys and girls,
little update for the kernel
Changelog:
- upstreamed to 4.4.102
- built touchscreen and battery drivers in the kernel instead of a module
- for other little changes see my github
use the instructions in the op please
Download: https://www.androidfilehost.com/?fid=889964283620769022
or following the link in the op to the correction version
Have fun, enjoy the kernel and your phone.
Donations are not mandatory but very welcome.
If you like my work and want to buy me a coffee: http://paypal.me/freak07
Click to expand...
Click to collapse
VadimTk said:
It still says "taimen" in the kernel signature, I assume this is fine?
Thanks for the kernel!
Click to expand...
Click to collapse
It's fine
@Freak07 glad to see you here! I'll be getting my Pixel 2 in a day or two
Will you be bringing EAS1.4 to the P2?
Sent from my Google Pixel XL using XDA Labs
Hey, can I use this with Developer preview final?
Sent from my Pixel 2 using Tapatalk
Can anybody give some real-life review? Is it sensibly better than the stock?
qinyue said:
Can anybody give some real-life review? Is it sensibly better than the stock?
Click to expand...
Click to collapse
I get great standby time on this kernel, and it feels super snappy
kinfam said:
I get great standby time on this kernel, and it feels super snappy
Click to expand...
Click to collapse
But the stock ROM is also quite battery friendly and smooth…
qinyue said:
But the stock ROM is also quite battery friendly and smooth…
Click to expand...
Click to collapse
Everyone's phone usage is different, so YMMV, that being said I only drained 2% standby overnight (8 hours) using this kernel, where on stock I would typically drain 4-5%. I also feel like apps load a little bit faster thanks to the slight OC. Slight but noticable IMO. Once again, YMMV.
adyscorpius said:
Hey, can I use this with Developer preview final?
Click to expand...
Click to collapse
I don’t know, but I think not. The kernel is built on the sources for 8.0.
you can always flash the kernel via fastboot and just restore the stock boot.img via fastboot from the dev preview zip in case it isn’t booting. And report back
stryker09 said:
@Freak07 glad to see you here! I'll be getting my Pixel 2 in a day or two
Will you be bringing EAS1.4 to the P2?
Click to expand...
Click to collapse
Already in