Develop Bugs

Windows Phone 7 build 6176 Unlocked Emulator Image

Thankfully Microsoft didn't change anything in their 'protection' of the WP7 emulator image. Following the same steps as the previous build, I was able to unlock the new 'April Refresh' emulator image. It's largely the same but here's what I've noticed.
It seems a bit more buggy. I've noticed some odd screen drawing issues and even jaggy lines. Maybe it's my laptop?
Most apps seem slightly updated and more polished. A few quirks here and there.
Phone! Yup, you can see the dialer and it even fakes working.
Office is actually working. Looks like the apps shown in the videos they released.
v2... in my late night grogginess I missed the settings entries. This one should have all the settings unlocked now (including some new stuff that wasn't in the February build)
Unlocked Emulator bin v2 (multiupload) (fast mirror)
To launch it use the same process as before... "xde.exe WM70C1AprilUnlockedv2.bin"
Gizmodo posted a How to: Try Windows Phone 7 now. Although that was for the previous build, the same general steps apply. You'll just need to use the emulator bin above and the new Dev tools CTP - April Refresh. It will NOT work with the February release.
New long press menu?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The dialer, very basic
the 'call status' screen while in a call
Call log w/ active phone call

Is anyone can reupload to an non premium rapidshare account or mirror this link please.
F.

Yea we need a mirror, rapidshare sucks.

replaced rapidshare with multiupload. If you have a better suggestion let me know.

RustyGrom said:
replaced rapidshare with multiupload. If you have a better suggestion let me know.
Click to expand...
Click to collapse
Very thanks!
This is a Kernel x64??

Thanks mate, that was what I was looking for... I was able to add a gmail account, but no sync occured. Althought, it seems it can sync contacts, mail & calendar alltogether.
Trying to find a way to add a windows live ID to fully exploit the phone

Giving this a try just for fun =D.
I'm not getting any luck through the method that you mentioned to load up the BIN. Is there a way I can drop this file in a file, open up Visual Studio, and do an F5 to get the emulator going with the new image?

svetius said:
Giving this a try just for fun =D.
I'm not getting any luck through the method that you mentioned to load up the BIN. Is there a way I can drop this file in a file, open up Visual Studio, and do an F5 to get the emulator going with the new image?
Click to expand...
Click to collapse
Replace the original one in C:\Program Files\Microsoft SDKs\WindowsPhone\v7.0\Emulation\Images\
I haven't tried with this one but you couldn't debug with the previous version. It will launch it though.

Cannot run the ROM!
Hey guys,
When I try to run the ROM, it hangs at the "Loading...." stage and doesn't go further at all.
Do you have any idea what I might be doing wrongly?
The first version of ROM works perfectly though.
Thank you in advance

tecfield said:
Hey guys,
When I try to run the ROM, it hangs at the "Loading...." stage and doesn't go further at all.
Do you have any idea what I might be doing wrongly?
The first version of ROM works perfectly though.
Thank you in advance
Click to expand...
Click to collapse
It's not a ROM, if you're trying to flash it then don't.

Fantastica said:
It's not a ROM, if you're trying to flash it then don't.
Click to expand...
Click to collapse
Sorry, maybe I stated it in a wrong way. I meant opening it in my laptop using the emulator (xde).
Thanks

tecfield said:
Hey guys,
When I try to run the ROM, it hangs at the "Loading...." stage and doesn't go further at all.
Do you have any idea what I might be doing wrongly?
The first version of ROM works perfectly though.
Thank you in advance
Click to expand...
Click to collapse
Are you using the old XDE or the one released yesterday? I haven't tried it in the previous one but I'm guessing this is the cause.

I missed the registry entries for the settings in the original one. I updated the OP with the corrected file.

How to run?
I put the .bin in /.../microsoft xde directory and launch xde.exe and it doens't start :/

G-ThGraf said:
How to run?
I put the .bin in /.../microsoft xde directory and launch xde.exe and it doens't start :/
Click to expand...
Click to collapse
Same methods as the previous one. Several ways mentioned in that thread. http://forum.xda-developers.com/showthread.php?t=647138&page=43

RustyGrom said:
Same methods as the previous one. Several ways mentioned in that thread. http://forum.xda-developers.com/showthread.php?t=647138&page=43
Click to expand...
Click to collapse
Perhaps you should post that on the OP, to prevent these questions as last time it was unlocked...

Anyone have any ideas as to why the other apps (mail, facebook, etc) won't connect? It's gotta be some stupid registry entry like the rest of the "unlocking" or maybe just in a XML file somewhere. I'm fairly certain that they're using "SNService" for windows live and facebook status update type stuff and ActiveSync with some new plugins for Live mail, etc.

Quick Hosting Mirror
FYI, I am mirroring this on my 100mbit server here ---> http://www.freedomhosting.org.uk/files/xda-developers/wm70C1AprilUnlockedv2.7z

RustyGrom said:
Are you using the old XDE or the one released yesterday? I haven't tried it in the previous one but I'm guessing this is the cause.
Click to expand...
Click to collapse
this should also be on the first post, I made the same mistake of using the old one and It would stay on loading

Suggestion for Hosting Of Files
RustyGrom said:
replaced rapidshare with multiupload. If you have a better suggestion let me know.
Click to expand...
Click to collapse
Sorry for being fussy here, cause I've always been a user of Mediafire, it gets the job done easily, so I kind of like it. Multiupload usually causes Megaupload to reject my ip, saying I have an elevated number of requests, bla bla. Rapidshare works only after a number of tries with the different server under advanced options, and the only one i use is zShare, and it sucks cause it downloads at unstable speeds(i get a speed ranging from 30kbp/s and 100kbp/s) while my max speed is 300kbps! Well, thanks for reading. It's okay if you don't change, I can live on.
EDIT: I saw the 100mbits server website, thanks freedom! although this is still a suggestion for the hosting of your files. thanks

[APP] [3.0+] Use Pc Keyboard via Bluetooth

This app is based on an idea that was posted in the general section called PCBTKeyboard, but it could not write outside the app.
So I wrote an app that simulates a keyboard and with this one can write inside and outside any app.
The app was developed on the Acer Iconia Tab a100 so the target platform is Honeycomb. Hope you enjoy it
Download:
Apk Link
Server Link
Apk sources
Server sources
Instructions:
1. Start server
2. Go to Bluetooth Keyboard settings
3. Select the PC the server is on
4. Select the Keyboard as input method
5. Voila, you can write on your Tab
Images: (Sorry for the bad pics....I have ICS and there is no root to use screenshot)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Used outside the app:

Is there any way you could recompile this for android 2.3? Or better still if you can release the source code

it can connect any keyboard as my pc has bluetooth?, you saved me spending = D
Would be good that you generate a shortcut (key combination) to move the keyboard automatically from the PC to the tablet.
I will try these days, thank you very much
supports shortcut keys (example: play / stop / volume (-) (+))????
you could do something similar for the mouse? so could use the tablet comfortably with the monitor
sorry, do not speak English and use the google translator ajaj
(thanks) =)

thanhphu said:
Is there any way you could recompile this for android 2.3? Or better still if you can release the source code
Click to expand...
Click to collapse
Sorry for the delayed reply
Sure, I can release the code.
It is intended for Honeycomb, so it wont be that easy to compile fore 2.3
I will post the source code today or tomorrow
Edit: Uploaded Sources (see first post)

Chrisis25 said:
it can connect any keyboard as my pc has bluetooth?, you saved me spending = D
Would be good that you generate a shortcut (key combination) to move the keyboard automatically from the PC to the tablet.
you could do something similar for the mouse? so could use the tablet comfortably with the monitor
sorry, do not speak English and use the google translator ajaj
(thanks) =)
Click to expand...
Click to collapse
Hey,
I also wanted to do a mouse, but its not that easy.
I think you only have to focus on the window and than it will write on the tablet.
Chrisis25 said:
I will try these days, thank you very much
supports shortcut keys (example: play / stop / volume (-) (+))????
Click to expand...
Click to collapse
It is easy to do this, but I dont know if I have the time
I will release the sources....so maybe you could do it
Hit the thanx btn

SimonHtcDesire said:
Hey,
I also wanted to do a mouse, but its not that easy.
I think you only have to focus on the window and than it will write on the tablet.
It is easy to do this, but I dont know if I have the time
I will release the sources....so maybe you could do it
Hit the thanx btn
Click to expand...
Click to collapse
I'll try again I had not worked, then edit or comment again.
the mouse, would not be done as in virtual machines? ...
the virtual machine captures the mouse while in the territory of the window ^ ^
(you maybe be easier to deal with connection wirelles) (if you got a pc and you got a tablet is the most common have Wifi internet) (example would be: "Wireless Keyboard" free download of the market)
I have ideas if the comment you ^ ^
the time it does not matter contributions will never be late: D
you got your obligations apart
EDIT: dont work for me
acer a100 android ics (flexreaper rf1 extreme edition by civato)
pc with windows 7 ultimate x64

Chrisis25 said:
I'll try again I had not worked, then edit or comment again.
the mouse, would not be done as in virtual machines? ...
the virtual machine captures the mouse while in the territory of the window ^ ^
(you maybe be easier to deal with connection wirelles) (if you got a pc and you got a tablet is the most common have Wifi internet) (example would be: "Wireless Keyboard" free download of the market)
I have ideas if the comment you ^ ^
the time it does not matter contributions will never be late: D
you got your obligations apart
Click to expand...
Click to collapse
I didnt realy understand how I should capture the mouse....but it dose not really matter, because I realy dont have time for anything right now
Chrisis25 said:
EDIT: dont work for me
acer a100 android ics (flexreaper rf1 extreme edition by civato)
pc with windows 7 ultimate x64
Click to expand...
Click to collapse
I know it has some bugs, but please give it several tries and tell me if it still dosent work....maby I can help.

SimonHtcDesire said:
I know it has some bugs, but please give it several tries and tell me if it still dosent work....maby I can help.
Click to expand...
Click to collapse
The server jar file won't work on x64 JVM, to use at x64, install x86 JVM and run with that Chrisis25.
Interesting app SimonHtcDesire!

GregórioAxiaMagno said:
The server jar file won't work on x64 JVM, to use at x64, install x86 JVM and run with that Chrisis25.
Interesting app SimonHtcDesire!
Click to expand...
Click to collapse
Hey,
Thank you...i am very sorry about the fact that i do not have enough time to finish it.
But I hoped someone would get inspires and maybe continue the project
Still hoping...

SimonHtcDesire said:
Hey,
Thank you...i am very sorry about the fact that i do not have enough time to finish it.
But I hoped someone would get inspires and maybe continue the project
Still hoping...
Click to expand...
Click to collapse
I'm checking it... I like read java codes :cyclops:

[August 3rd]SailfishOS for Galaxy Nexus (Alpha)

SailfishOS for Galaxy Nexus (GSM)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is a community port of Jolla's SailfishOS for the Galaxy Nexus.
It features a gesture-based user interface with a unique design and ease-of-use in mind.
For more information about SailfishOS please head over to sailfishos.org.
This is not an Android ROM, this is a different operating system.
It only uses parts of Android for hardware enablement (drivers).
Special Thanks to vakkov, sledges, mugna91, the Mer Project, the Nemo Project and all the fine people over at #sailfishos-porters
Release Notes:
This release is based on SailfishOS 1.0.8.19 (Tahkalampi).
The Galaxy Nexus port is considered to be of alpha quality.
Though depending on your usage it might be stabile enough for daily use.
Bug reports:
Please issue bugreports at the Nemo Project Bugzilla.
Known issues:
Due to an issue with ofono, reading from SIM does not work. You'll need to remove your PIN lock before flashing.
Setting an ambiance (color theme & wallpaper) causes hangs. Either needs the battery to be pulled, or you can SSH into the device and run:
systemctl --user restart lipstick
The startup wizard is getting skipped for now, due to the issue above.
The Jolla Store currently does not work. As an alternative you can try Warehouse for OpenRepos.
The camera does not work.
Due to redistribution issues the codec for MP3 can't shipped. To enable the codec run the following command:
devel-su zypper in gst-av
Instructions & Download:
Make a backup
Factory Reset (Wipe /data & /cache)
Wipe /system
Install CyanogenMod 10.1.3
Install SailfishOS on top:
Mirrors:
beidl.eu
Reboot
Old versions:
Alpha1:
XDA
beidl.eu
XDA:DevDB Information
SailfishOS for Galaxy Nexus, ROM for the Samsung Galaxy Nexus
Contributors
beidl, vakkov, sledges
ROM Kernel: Linux 3.0.x
Version Information
Status: Alpha
Created 2014-08-03
Last Updated 2014-08-24

Reserved
Changes:
August 24th, 2014:
Notification LED working
Bluetooth activation/deactivation fixed
Changes for Video playback (work in progress)
August 3rd, 2014:
Initial release

Nice & interesting..

Awesome! I'd love to check this out, as I've been following the progress in the other thread! (And because I'd actually like to check sailfish out, I never experienced Maemo and Meego so this will be an entirely new experience). However the XDA download link is unbelievably slow (Topping out at like 30 KB/s maximum on a decent internet connection). Does anyone have a download link from a service such as Google Drive/Mega/AFH? I'd be extremely thankful if someone did have a mirror, and would return the favour by uploading it. (If the OP allows for mirrors).

Justice™ said:
Awesome! I'd love to check this out, as I've been following the progress in the other thread! (And because I'd actually like to check sailfish out, I never experienced Maemo and Meego so this will be an entirely new experience). However the XDA download link is unbelievably slow (Topping out at like 30 KB/s maximum on a decent internet connection). Does anyone have a download link from a service such as Google Drive/Mega/AFH? I'd be extremely thankful if someone did have a mirror, and would return the favour by uploading it. (If the OP allows for mirrors).
Click to expand...
Click to collapse
Mirror to my private server added.

Ubuntu 14.04 recognizes the device as a ethernet cable connection..
I've played around the USB settings and all the others are charging-only.

freshgiammi said:
Ubuntu 14.04 recognizes the device as a ethernet cable connection..
I've played around the USB settings and all the others are charging-only.
Click to expand...
Click to collapse
Alright, definitely something nobody has tested, for whatever reason. As you are using Ubuntu, a quick sshfs mount to [email protected] might do it for now.

beidl said:
Alright, definitely something nobody has tested, for whatever reason. As you are using Ubuntu, a quick sshfs mount to [email protected] might do it for now.
Click to expand...
Click to collapse
Also, powering down the device while connected via USB to the PC, reboots it instead of shutting it down.
Can't try sshfs since i've just restored my Android backup bc Gnex is my daily driver, I'm sorry.

i couldnt select allow untrusted software to install warehouse. it does nothing when i select accept to allow it o settings.

freshgiammi said:
Also, powering down the device while connected via USB to the PC, reboots it instead of shutting it down.
Can't try sshfs since i've just restored my Android backup bc Gnex is my daily driver, I'm sorry.
Click to expand...
Click to collapse
As mentioned, the "Alpha" tag is pretty much justified. Thank you for testing.
Also, the "untrusted software" switch is pretty useless and installing 3rd party applications
is supposed to be done through the command line for now.

beidl said:
As mentioned, the "Alpha" tag is pretty much justified. Thank you for testing.
Also, the "untrusted software" switch is pretty useless and installing 3rd party applications
is supposed to be done through the command line for now.
Click to expand...
Click to collapse
so i have to install cm10.1.3 maguro and install the sailfish os alpha..?
cause it been 15minute it's stuck on google boot screen.
EDIT:
does it have to be EXT4..?
edit:
ah yeah it does ext4..

z3n0x1 said:
so i have to install cm10.1.3 maguro and install the sailfish os alpha..?
cause it been 15minute it's stuck on google boot screen.
EDIT:
does it have to be EXT4..?
Click to expand...
Click to collapse
Yes, I would assume it needs to be EXT4

Justice™ said:
Yes, I would assume it needs to be EXT4
Click to expand...
Click to collapse
yup correct just installed it now..
and now need to install the alternative jolla store.. the warehouse.. but i don't know how..
allow untrusted software are not working..
what i have to go.. even get the warehouse.rpm.. it still can't be installed..

z3n0x1 said:
yup correct just installed it now..
and now need to install the alternative jolla store.. the warehouse.. but i don't know how..
allow untrusted software are not working..
what i have to go.. even get the warehouse.rpm.. it still can't be installed..
Click to expand...
Click to collapse
You need to install it through the terminal, I'm not sure what the command is to install rpms of the top of my head, so googling it would probably get you an answer.

Justice™ said:
You need to install it through the terminal, I'm not sure what the command is to install rpms of the top of my head, so googling it would probably get you an answer.
Click to expand...
Click to collapse
well i got this...
after download the warehouse.rpm
goto setting > develoment > set password > save
type into terminal: devel-su -c harbour-warehouse
and type the password.. but nothing comes up
do i have to restart after save password or maybe restart after type pass word?? :silly:
EDIT:
open terminal
type cd ~/Downloads
type pkcon install-local ./downloaded-package.rpm
got "fatal error:nothing provides libsailfishapp.so.1 needed by harbour-warehouse-0.3-20.armv7h"
need the libsailfishapp.so.1.. lookfor it now..
the alpha looks smooth untill now been few hours test.. message working.. wifi.. haven't check the rest..
im still curious about how to install .rpm

z3n0x1 said:
well i got this...
after download the warehouse.rpm
goto setting > develoment > set password > save
type into terminal: devel-su -c harbour-warehouse
and type the password.. but nothing comes up
do i have to restart after save password or maybe restart after type pass word?? :silly:
the alpha looks smooth untill now been few hours test.. message working.. wifi.. haven't check the rest..
im still curious about how to install .rpm
Click to expand...
Click to collapse
I assume you'd need to elevate to root using devel-su, and then use one of the commands I've quoted below to install the warehouse rpm.
From terminal, root
Install a package
rpm –ivh packagename
upgrade a package
rpm –Uvh packagename
you can find out what the switches mean by doing a rpm --help from the command line.
Click to expand...
Click to collapse
I think -ivh would indicate installation and -uvh being the uninstall process

Justice™ said:
I assume you'd need to elevate to root using devel-su, and then use one of the commands I've quoted below to install the warehouse rpm.
I think -ivh would indicate installation and -uvh being the uninstall process
Click to expand...
Click to collapse
yes it's seems so..
i'll try you code now..
or maybe the -uvh are the upgrade..?? since it's upgrade on the code you are quote..
EDIT:
error: failed dependdencies:
libsailfishapp.so.1 is needed by harbour-warehouse-0.3-20.armv7h
so i perssume it the libsailfishapp.so.1 the problem..
http://forum.xda-developers.com/showpost.php?p=53171554&postcount=90
he's said that just copy it from /usr/lib/ . but how come even we don't have filemanager..
i'll try the pkcon install jolla-fileman (the native file manager from jolla) apprently the rpm are not there..
just maybe.. even we have the native file manager.. the missing libsailfishapp.so.1 still occur..

z3n0x1 said:
yes it's seems so..
i'll try you code now..
or maybe the -uvh are the upgrade..?? since it's upgrade on the code you are quote..
Click to expand...
Click to collapse
I must've misread it as uninstall then, yeah.

Justice™ said:
I must've misread it as uninstall then, yeah.
Click to expand...
Click to collapse
oh my im deprresed Lol
oh my now what should i do..
is there anyway that we can reach the root via computer..?

z3n0x1 said:
oh my im deprresed Lol
oh my now what should i do..
is there anyway that we can reach the root via computer..?
Click to expand...
Click to collapse
You could try and SSH in and run the commands, which may be easier, I'm trying to get the warehouse installed now

[GUIDE] Deploying Astoria Packages Manually To W10M

MOD EDIT: I'm closing this thread for now until the possibility opens back up for us to get Astoria running again. Too many posts cluttering away
Hi everyone,
After several days of sniffing Windows Update traffic and lots of downgrading
, I've found a way to get Astoria installed and working on the HTC One M8 for Windows. that's right..
In THEORY, this should work for all devices that aren't supported by Astoria project.
The reason for this: In the process to go straight to 10536 directly from wp8.1,
the needed aow.wim file got pulled by MS (for security reasons i suppose
and i have no idea when or if they will bring it back).
Requirements:
-installed WDK,WPAK,WPDK (containing iutool.exe) get it there: http://forum.xda-developers.com/win...ools-wdk-wpak-wpdk-cabs-building-wp8-t3183972
-w10m build 10536 installed on phone
-usb connection to pc
-astoria cabs
Here are the direct download links of the needed astoria cabs:
10166 (canonical)
Code:
http://wp.ds.download.windowsupdate.com/d/msdownload/update/software/dflt/2015/07/microsoft.ms_projecta.mainos.spkg_9dec9dcfe0f22750e3737e9a484e7a60e193303c.cab
10512 (diff)
Code:
http://wp.ds.download.windowsupdate.com/d/msdownload/update/software/dflt/2015/08/microsoft.ms_projecta.mainos.cbsu_c36c1e67bd04b694a01b65efeb70213ff439be76.cab
10514 (diff)
Code:
http://wp.ds.download.windowsupdate.com/d/msdownload/update/software/dflt/2015/08/microsoft.ms_projecta.mainos.cbsu_7ec3fb51b79d57de88e6adaa0e27800106ecedd8.cab
10536 (diff)
Code:
http://wp.ds.download.windowsupdate.com/d/msdownload/update/software/dflt/2015/09/microsoft.ms_projecta.mainos.cbsu_f0ea237eea0f74372a7eb6745585a06a4ee3feb9.cab
Instructions:
-Go to iutool path in cmd with admin rights (usually c:\program files (x86)\windows phone kits\8.1\tools\bin\i386)
-Type "iutool -l" to see if the device is connected and recognized.
1 put only the first cab (10166) to a new folder like c:\cabs
2 then type: iutool -v -p c:\cabs
3 it should push the cab to the device and start the update.
4 there might be a error 0x8024a110 but it should work.
5 the device will automatically reboot very soon and go to flash mode (gears) to apply the cab.
6 then there will be the usual "data migration".
Repeat steps 1-6 with all the cabs in correct order one by one.
Astoria should now be installed and working.
There are already guides on xda about getting apk's installed via wconnect.
Thanks to @snickler for helping me with the method to obtain the cabs even if ms tries to prevent it.
Thanks to XDA Dev Team for daily chats and support.
Screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

reserved post

Cool, so easy than msft way
Thanks ? ?

@System322 @mavvie
@Ranomez @apinkshidae is that what you guys were trying to do ? hope it helps

Bnjalal said:
@System322 @mavvie
@Ranomez @apinkshidae is that what you guys were trying to do ? hope it helps
Click to expand...
Click to collapse
Well you sir are a genius, lol, thank you very much, will try it and report if it also works for my device (which has 512MB RAM only).

Anyone could upload iutool.exe?

augustinionut said:
Anyone could upload iutool.exe?
Click to expand...
Click to collapse
You need to install the whole package, just iutool won't work, take it from the xda thread linked in the OP and install it, it's kinda big but the download speeds are good (if you do have good internet speeds).

I have a 6 GB limited plan. I will download at work

I can't seem to be able to flash the second cab, the first one gave the error but flashed but the second one gives the error and nothing happens.
EDIT: @Bnjalal do we need to keep the first cab in the folder, as far as I could understand from your instructions the answer would be no but I can't flash the second one?
Or do I need to do anything else?

@Ranomez my good Sir, I am not the op of this thread, I was just reading the threads trying to figure out why my 'supported device' getting error 14 and came through your posts and struggles and wanted to contribute to the good community. I am really sorry that I am not as experienced as the others here at XDA and thought that mentioning you here was the least I can do to offer help or support. But for the time being, I'm sure the OP will reply to you and offer support as he was the one who made the find

Bnjalal said:
@Ranomez my good Sir, I am not the op of this thread, I was just reading the threads trying to figure out why my 'supported device' getting error 14 and came through your posts and struggles and wanted to contribute to the good community. I am really sorry that I am not as experienced as the others here at XDA and thought that mentioning you here was the least I can do to offer help or support. But for the time being, I'm sure the OP will reply to you and offer support as he was the one who made the find
Click to expand...
Click to collapse
Oops, excuse me, I don't even know how I managed to confuse you for the OP, lol, sorry again.
EDIT: Meanwhile I answered my own question: DON'T keep the first cab in the folder, my device seems to be stuck in the flashing screen.

@Ranomez no worries pal, wish you all the best

An alternate way instead of putting them in one folder, you can call the individual cab directly. So instead of c:\cabs, you would put c:\cabs\blahblah.cab and it will stage that particular cab.
Throwing them one by one in a directory is an easier way to keep track of your progress.

Except the initial cab file the others just won't flash, might be cause I already installed the astoria files in the past with the change model trick (but it never worked) but I doubt it, probably it's because the device has 512MB RAM and astoria does a hardware check for that.
Anyway just to be sure I will downgrade to WP8.1 and take the update again.

BTW why not all cabs at a time ?
No need to DLOAD 6GB Stuff.
i836 is enough for everything, if any one would share. Just below than 10 MB

djamol said:
BTW why not all cabs at a time ?
No need to DLOAD 6GB Stuff.
i836 is enough for everything, if any one would share. Just below than 10 MB
Click to expand...
Click to collapse
Because the cabs won't install all at once as some are diffs. Each cab is a corresponding package version. It checks for version dependencies and if there's a clash or if you're trying to install a cab that is lower or higher than the dependency, it won't let you do it.

@snickler oh yeah, got it, thanks mate !
Btw I saw you after a long time, where was hidden you

I've been around .

Confirmed 100% sure that this doesn't work on 512MB devices...only the first file can be flashed, the others can't.
Which means astoria does do some strange device hardware check or something like that.

Bnjalal said:
@System322 @mavvie
@Ranomez @apinkshidae is that what you guys were trying to do ? hope it helps
Click to expand...
Click to collapse
Yes, exactly this. My 920 is still choking on trying to go to 10536 from 10166. Guess the servers are a bit bogged down with the 8.1 Update 2.
I'm certainly going to try this one.

Development [Somewhat DISCONTINUED [Script] Advanced rootless debloater for Samsung phones (and Tablets)

JBNCK One UI Experience - a customized rootless debloater for Samsung phones
NOTE THAT THIS IS A PRE-RELEASE!!! Not every feature works!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
#
The script is written in python so you need to have python installed (most linux distros come with it anyways). A download link is provided on GitHub.
How to use:
1. In order to have a flawless and smooth experience, back up your data and do a factory reset.
2. Enable USB Debugging
3. Download the program and run it. A window should pop up on your phone. Please confirm.
4. Type in "Y" if you are asked if you are running it for the first time. This will completely nuke your phone and leave you with a settings app
5. After thats done chose a preset (right now only the default Samsung one works!!!)
6. After its done you can either set up your phone like normal or chose from the other options (for example if you want software updates or NFC support).
If a feature you use gets removed:
1. Install package names viewer from play store and look for the package name of the app/feature.
2. Run the program and enter "N" if you are asked if you are running the script for the first time
3. Chose option 10 and enter the package name
If you encounter any other problems feel free to tell me about it here.
Download: https://github.com/JBNCK/One-UI-Experience/releases​

to get back the default settings i just do a factory reset or do I have to flash the rom?

M4jQ said:
to get back the default settings i just do a factory reset or do I have to flash the rom?
Click to expand...
Click to collapse
You just need to do a factory reset, no need to flash the firmware

Trojan:Win32/Wacatac.H!ml
Why?

Vega56 said:
Trojan:Win32/Wacatac.H!ml
Why?
Click to expand...
Click to collapse
pretty sure this is not a trojan lmao you can even see the source code on github

JanBoyGamer23 said:
pretty sure this is not a trojan lmao you can even see the source code on github
Click to expand...
Click to collapse
Yeah, but why is this showing? ...

in which file?

!!! Warning
The program I used in order to compile the python file is probably malicious. The py file is undetected by virustotal but the compiled exe is. I will remove the download until I fixed the problem!
DO NOT RUN THE .EXE UNTIL I PROVIDED A NEW DOWNLOAD LINK!!!

NOICE! NICE

Update:
Ok I repacked the script without the malicious .exe. Once again, I apologize for the inconvenience. Now you also need to have python3 installed on windows. A download link is provided on GitHub.
Also, next release will add the missing features.
Have fun with my little script!

Works perfect.
Hope option 3 comes soon.

when i connect the phone to pc nothing happens, no popup.
usb debug on, i did factory reset.
i connect the phone and the phone asks me if i want to share files with pc, i consent and then i open up your program but nothing happens
Edit: well i solved coping the script in adb

Vega56 said:
Works perfect.
Hope option 3 comes soon.
Click to expand...
Click to collapse
Glad it worked and thanks for the positive feedback I'm working on the other options and will release them in the next couple of days. I'm a bit busy right now because of school but I try to deliver it as fast as possible

Khaver89 said:
when i connect the phone to pc nothing happens, no popup.
usb debug on, i did factory reset.
i connect the phone and the phone asks me if i want to share files with pc, i consent and then i open up your program but nothing happens
Edit: well i solved coping the script in adb
Click to expand...
Click to collapse
Nice to hear that you managed to solve the problem, however, did you try installing the USB drivers from Samsung? (either manually or by connecting your phone to your computer with usb debugging on and performing a windows update)

which applications are needed to make samsung findmyphone work and to enable backup of Secure Folders?

Can i remove google services with that too?
Are there any description what each of the options do? (more detailed?)

Can you please add an option to debloat GOS, game booster and Game launcher also any other system app that may be throttling the tabs performance?
Thanks

HARNATH said:
Can you please add an option to debloat GOS, game booster and Game launcher also any other system app that may be throttling the tabs performance?
Thanks
Click to expand...
Click to collapse
you can use ADB AppControl to find apps and remove it or find names and add it to this script
edit:
I also found Universal Android Debloater GUI

M4jQ said:
which applications are needed to make samsung findmyphone work and to enable backup of Secure Folders?
Click to expand...
Click to collapse
sorry for the late reply
The packages are
com.samsung.knox.securefolder
com.samsung.android.fmm

luffy786 said:
Can i remove google services with that too?
Are there any description what each of the options do? (more detailed?)
Click to expand...
Click to collapse
Yes but it is not a root debloat so you cant replace them with microg. To remove gms from your phone you have to choose option 11 and type in com.google.android.gms and com.google.android.gsf