Related
If you have a 2.73+ rom with the latest hboot you will need to follow This Post to boot the recovery image
1) restart into bootloader (switch on holding the back button)
2) Extract the latest GSM Hero recovery IMG into your android SDK/tools folder
(For SDK & CMD help reffer to Post 3 "The Basics" )
3) Download Superuser.zip and extract the contents to your SDK/tools folder.
4) Plug in USB
5) open a CMD prompt from the tools directory and type the following command> fastboot boot recovery-RA-hero-v1.5.2.img
(you should now enter a recovery console on the handset)
NOW PERFORM A NANDROID BACKUP from the recovery menu, once completre, continue..
6)then type the following commands in CMD exactly as they are here, hitting enter for a new line.
adb shell mount /system
adb push su /system/bin/
adb shell chmod 4755 /system/bin/su
adb push Superuser.apk /system/app/
adb shell reboot
Congratulations you now have root access..
Download "Root Boot" from the app store (this will only work if you have root!)
Step 6 modified thanks to ENLIGHTENER, cheers, su whitelist working nicely now..
Recovery image updated to recovery-RA-hero-v1.5.2.img , thanks to Amon_RA
Please be carefull! I accept no liability!
FYI, To unroot you will have to either restore an earlier backup or flash a stock rom..... (reccomend the new official HTC Update via RUU to do a full reset)
OK i have a stupid question as i'm new to all that android thing. Where is the sdk folder? How do i open CMD? Maby u could do a tutorial for totaly new guys on *how to root your HERO* ??
Thanks
The Basics
gaabrysz said:
OK i have a stupid question as i'm new to all that android thing. Where is the sdk folder? How do i open CMD? Maby u could do a tutorial for totaly new guys on *how to root your HERO* ??
Thanks
Click to expand...
Click to collapse
1) you need to download the android software development kit from Here and extract it to yourhard drive.
2) (check) fastboot and adb should be located in the tools folder.
3) in tools right click>new>shortcut when asked enter CMD.exe
4) right click on cmd.exe shortcut, go to properties and clear the "start in" box.
job done, follow as above.
*Edit*
FYI
Verify you have root, go to app store> download Root Booter and test its functions if this works, you have root!
The G2 is the HTC Hero on T-Mobile.
The SDK includes all the drivers needed.
once you have booted the img via fastboot you should enter a recovery console, at this point you need to follow the instructions exactly as typed for adb,
I am running windows 7 Ultimate, should be the same for all windows platforms,
Cheers
__________________
Thank you
Oh and one more question. Do i loose any data doing this??
gaabrysz said:
Thank you
Oh and one more question. Do i loose any data doing this??
Click to expand...
Click to collapse
No, you will not loose anything but be sure to do a Nandroid incase you need to go back to "Stock"
I've followed the process and I never ran into any problems, but I'm new to Android having previously owned Win Mobile phones and now an iPhone.
I got my G2 today on a contract upgrade just so that I could play around with it and try some development work.
Now that I have followed the process, how do I verify that I now have root?
Is there anything I can do to test?
MrHorus said:
I've followed the process and I never ran into any problems, but I'm new to Android having previously owned Win Mobile phones and now an iPhone.
I got my G2 today on a contract upgrade just so that I could play around with it and try some development work.
Now that I have followed the process, how do I verify that I now have root?
Is there anything I can do to test?
Click to expand...
Click to collapse
Use a program that requires root access.
MrHorus said:
I've followed the process and I never ran into any problems, but I'm new to Android having previously owned Win Mobile phones and now an iPhone.
I got my G2 today on a contract upgrade just so that I could play around with it and try some development work.
Now that I have followed the process, how do I verify that I now have root?
Is there anything I can do to test?
Click to expand...
Click to collapse
If by G2 you mean HTC Magic/Sapphire rather than HTC Hero you're in the wrong place...
OK i have a problem when i do this:
4) open CMD prompt use> fastboot boot cm-hero-recovery.img
the phone reboots and then you have to do "adb shell" but when i do that it says "error: device not found", what now??
Just tried it and it works sweet... Took all of 5 minutes... Awesome work thank you
I now have root access on my Hero
gaabrysz said:
OK i have a problem when i do this:
4) open CMD prompt use> fastboot boot cm-hero-recovery.img
the phone reboots and then you have to do "adb shell" but when i do that it says "error: device not found", what now??
Click to expand...
Click to collapse
Have you installed the correct drivers? They are located in the SDK folders you downloaded.
If so try entering "adb devices" in the commmand prompt, Just incase the daemon didnt start.
I think i did. i'm on win 7 x64 btw. ok i'll switch to vista 32bit and try there.
Ok i have checked and in the device manager there is a ADB device>HTC bootloader so i think drivers are correct.
gaabrysz said:
OK i have a problem when i do this:
4) open CMD prompt use> fastboot boot cm-hero-recovery.img
the phone reboots and then you have to do "adb shell" but when i do that it says "error: device not found", what now??
Click to expand...
Click to collapse
Having the exact same problem here.
gaabrysz said:
I think i did. i'm on win 7 x64 btw. ok i'll switch to vista 32bit and try there.
Ok i have checked and in the device manager there is a ADB device>HTC bootloader so i think drivers are correct.
Click to expand...
Click to collapse
try entering adb devices see if that makes any differences
btw, when i done mine the phone was in the recovery console..
Never mind I got it, I'm on Win7 x64, had to switch the driver from:
HTC Dream Composite ADB Interface Version: 1.0.10.1 [25/06/09]
To:
HTC Dream Composite ADB Interface Version: 1.0.9.0
Ok so lets clear something. after i type in cmd: fastboot boot cm-hero-recovery.img my phone reboots and goes to recovery console where i have some otions.... so now i have to type in cmd: adb shell, yes??
still nothing and the adb devices didn't help.
Mienaikage said:
Never mind I got it, I'm on Win7 x64, had to switch the driver from:
HTC Dream Composite ADB Interface Version: 1.0.10.1 [25/06/09]
To:
HTC Dream Composite ADB Interface Version: 1.0.9.0
Click to expand...
Click to collapse
Can u share a link to the drivers?? Please
it sounds like a driver issue. Using the lastest SDK?
android-sdk-windows-1.5_r3
OK got it working. It is a driver issue. using latest sdk but i had to use older drivers just like Mienaikage sad.
gaabrysz said:
Can u share a link to the drivers?? Please
Click to expand...
Click to collapse
They came with the SDK I believe, in the android-sdk-windows-1.5_r3\usb_driver\amd64 folder.
If that's not it then it was this one: http://forum.xda-developers.com/showthread.php?t=446274
Hi.i am trying to set up adb on my compaq laptop vista,i tried everything,youtube videos,guides
Still dont work,please help me if there,s any other metod.any help ill bappreciated,
Sent from my HTC Vision using XDA App
Have you tried this ?
http://forum.xda-developers.com/showthread.php?t=865685
Prob solvd thanks so much.
Sent from my HTC Vision using XDA App
Please help me on this one too
Hi,i am running vista trying to use gfree 2,seems to b everything working finr,adb starts fine,prob is when I run a cmd it says no file or directory found.please I m new on droid,please help me how to execute files through adb.
Sent from my HTC Vision using XDA App
imranbandial said:
Please help me on this one too
Hi,i am running vista trying to use gfree 2,seems to b everything working finr,adb starts fine,prob is when I run a cmd it says no file or directory found.please I m new on droid,please help me how to execute files through adb.
Click to expand...
Click to collapse
Have you been through the guide that I linked above, and done all the steps to get adb setup on your PC ?
If you're having a problem with the gfree procedure it would be best if you post up a question in it on that thread. Are you sure you're typing the commands exactly as it says there ?
the only thing i wanna know how to execute files,where should i put gfree on my comp and on my phone so the adb cmd recognize it,thanks once again .adb working fine it recognize my device the only thing it dont recognize any cmds,file or directory not found..
imranbandial said:
the only thing i wanna know how to execute files,where should i put gfree on my comp and on my phone so the adb cmd recognize it,thanks once again .adb working fine it recognize my device the only thing it dont recognize any cmds,file or directory not found..
Click to expand...
Click to collapse
When you are running adb, if for example you do "adb push gfree", where you are trying to copy (push) the file "gfree" from your PC to your phone, it will look in your current directory for gfree. So given you are usually doing this at the command prompt, in Windows do a "cd" (change directory) to change to the directory where you have put gfree.
For example, if gfree is in "\users\fred\desktop", then do "cd \users\fred\desktop", then run your "adb push gfree" and it will find the file.
If you do "adb shell" does that work, does it come up with a $ prompt ? If so, then it's working and has started a command "shell" on your phone.
This post is now deprecated there are new ways of rooting more easily here is the link to one of those
http://forum.xda-developers.com/showthread.php?t=1392310
just kept for reference
link no longer works as it is a very old boot img, if you wanna go this way use latest superboot
Rooting your Galaxy Nexus
Download this file contains necessary files and also lastest samsung drivers in case you dont have them, probably you need android sdk drivers for fastboot
Download
credit to @peteralfonso for the insecure boot.img which allows this to remount system and this way install su binary and Superuser.apk
This are the instructions for Galaxy Nexus
they require basic knowledge of fastboot adb and using command prompt/terminal
works same way on linux and windows
Be sure to have fastboot and adb ready and working
extract somewhere and you will get 4 files su, Superuser.apk , boot.img and drivers
turn off the phone
Boot into bootloader mode (Vol UP+ Vol Down + Power) then execute this command, be sure to have fastboot and boot.img on same folder or be ready to type a long path pointing to your boot.img
REMINDER: by doing fastboot oem unlock you will completely wipe your device so be sure to backup anything important
execute this command
Code:
fastboot oem unlock
fastboot boot boot.img
edit: thanks chirality forgot the oem unlock
the device will reboot and start in unsafe mode where you can enable adb as root usually on production devices this is not posible
Be sure to enable adb debugging on menu
back to command prompt
Code:
adb root
adb remount
adb push su /system/bin
adb push Superuser.apk /system/app
adb shell chmod 06755 /system/bin/su
adb shell chmod 06755 /system/app/Superuser.apk
adb reboot
and you are done and youve got your Galaxy Nexus rooted
This process does not involve flashing another boot.img, it just boots once with it and after that returns to original boot.img
As usual
YOU ARE PERFORMING THIS AT YOUR OWN RISK! I AM NOT RESPOSIBLE FOR ANY BRICKS OR PROBLEMS!
Which wont happen we are just pushing 2 files to our phone
edit2: sorry for the bad paths of adb was too late and didnt notice my error
Don't you have to do "fastboot oem unlock" first before being able to boot off the insecure image? I thought they fixed that with the Nexus S already.
Thanks for the post - apparently people are having problems with the Superboot method, so I'll give this a go when mine arrives today.
I guess this comes with all the usual "at your own risk" and "will void your warranty" warnings?
(sorry if that's a stupid question - this is my first Nexus, so I'm not sure where I stand on rooting, unlocking bootloaders, and the warranty etc.)
Great - worked without issue for me and I can now use the Entree VPN client for connecting into work. (the HD screen is great for remote desktop work)
Minor typo in the permissions lines though - should read:
adb shell chmod 06755 /system/bin/su
adb shell chmod 06755 /system/app/Superuser.apk
Thanks very much,
Chris.
Thanks for this davioxx for putting together the guide, chriscole for the fixes and @peteralfonso for the insecure boot.img.
I'm now succesfully rooted.
It seems Root Explorer needs an update for the GN though. Only opens in the bottom left corner of the screen for me, and is comprised of static.
Sorry for the newbee question, been quite a while since rooting my nexus one...
Do i need to enable adb debugging on phone menu before executing the fastboot oem unlock code and then enable it again after it reboots and starts in safe mode?
w00t!
Thank you
You may want to change the path names on the chmod part, I blindly followed the instructions and the files were in diffrent places from where I pushed them to
But thanks \o/
I haz root!
Tnx, easy like all nexus devices, now need some you tube for that!
Sent Via My HTC Desire HD
looks pretty simple ... hopefully it will be the same process for us in the States
Not 100% sure what's going on here. I haven't rooted since I got the Nexus One.
When my phone is on and connected, command prompt shows my phone as an attached device. But when I boot into bootloader, it isn't attached anymore and command prompt just tells me that the commands are unrecognized? How come?
majikdragoon said:
Not 100% sure what's going on here. I haven't rooted since I got the Nexus One.
When my phone is on and connected, command prompt shows my phone as an attached device. But when I boot into bootloader, it isn't attached anymore and command prompt just tells me that the commands are unrecognized? How come?
Click to expand...
Click to collapse
Are you doing it via adb or fastboot?
Not sure. I restarted the phone into bootloader and tried to follow the instructions
Hahaha... I was trying to sideload N64oid as it's been removed from the market. I ended up using Android Centrals Sideloader instead.
majikdragoon said:
Not sure. I restarted the phone into bootloader and tried to follow the instructions
Hahaha... I was trying to sideload N64oid as it's been removed from the market. I ended up using Android Centrals Sideloader instead.
Click to expand...
Click to collapse
Hi probably you dont have the bootloader driver installed, that has to be done manually at least for my win 64 machine, check this thread about that
Set Up ADB, fastboot and drivers Nexus S it is practically the same for your Galaxy Nexus
Oh ok! I'll look at that now. Thanks fellas
Why couldn't you just....
Fastboot OEM unlock
Fastboot flash recovery
Flash su zip in recovery
(obviously, I'm omitting some steps here like after Fastboot flashing recovery, booting into recovery...ect)
Unless there isn't a custom recovery available yet...
That's how I rooted BOTH the N1 and NS....
Sent from my HTC Sensation 4G using xda premium until I can get the Galaxy Nexus on T-Mobile
there isnt a custom recovery yet and stock recovery needs signed recoveries
actually not hard you take 3 mins in all process
Babydoll25 said:
Why couldn't you just....
Fastboot OEM unlock
Fastboot flash recovery
Flash su zip in recovery
(obviously, I'm omitting some steps here like after Fastboot flashing recovery, booting into recovery...ect)
Unless there isn't a custom recovery available yet...
That's how I rooted BOTH the N1 and NS....
Sent from my HTC Sensation 4G using xda premium until I can get the Galaxy Nexus on T-Mobile
Click to expand...
Click to collapse
Babydoll25 said:
Unless there isn't a custom recovery available yet...
Click to expand...
Click to collapse
Ding ding ding.
Also some people don't want to flash a custom recovery anyway.
Sent from my Nexus S using XDA App
Drivers
Does anyone know where else to get the drivers from? installed the ones attached but when i go into device manager, i am seeing android.1 and when type "fastboot devices" nothing comes up
coleburns said:
Does anyone know where else to get the drivers from? installed the ones attached but when i go into device manager, i am seeing android.1 and when type "fastboot devices" nothing comes up
Click to expand...
Click to collapse
How I got fastboot working was to install pdanet, one of the steps is to install all the drivers. It doesn't matter if it fails after that step, I didn't want pdanet anyways
The ones attached seem to only be for adb mode.
Sent from my Galaxy Nexus using xda premium
el3ctrik said:
How I got fastboot working was to install pdanet, one of the steps is to install all the drivers. It doesn't matter if it fails after that step, I didn't want pdanet anyways
The ones attached seem to only be for adb mode.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
thanks for that, managed to get it working with pdanet.
however when i try to run the adb commands, i get the adbt cannot run as root in production builds
how did you get rooted?
thanks
Hi guys! I'm new to the forum but not new to the IT world and not new to Linux or Android devices.
I'm stuck at the Kindle Fire screen after a failed attempt to root the device. Here's what I did. I'm hoping somebody can please help me. I did lots of Google searches to try to solve my issue and I can't seem to find the right solution.
So here's the background. I tried to root my KF by using this process http://www.pcworld.com/article/244303/how_to_root_your_kindle_fire.html on an Windows 7 VM. Then I found that SuperOneClick didn't work for KF6.3. So then I tried to KF Utility v.0.9.5 http://forum.xda-developers.com/showthread.php?t=1399889
I selected the option to root the KF. After it went through the process and I got the Kindle Fire screen (which is sounds like the KF is in the fastboot process) I couldn't get anything to work at that point. I couldn't get the VM to even see the KF nor Ubuntu (which is the main OS of that laptop). So then I figured I bricked the device. So I followed these instructions http://www.androidauthority.com/how-to-unbrick-your-amazon-kindle-fire-46412/ but that won't work ecause the KF isn't being recognized by the OS. SO at that point, I couldn't get anything to work. So I rebooted the laptop (which is running Ubuntu 12) and the KF booted back up and it fired back up.
If I power off the KF and turn it back on, it gets stuck at the KF bootup screen.
So at that point I decided to throw Windows 7 on a different laptop that I have and see if I can get it to work. So I installed java & Android ADK for my OS (Windows 7). I installed the USB driver and updated the packages. So I go through these instructions first http://forum.xda-developers.com/showthread.php?t=1568340 and I can't get the KF to be recognized as a device through adb. So I go back to the PC World instructions (linked above) and I follow steps through step 8. And I still can't get the KF to be displayed through adb. When I try to kill the adb server and then enter adb devices, I still can't get the KF to be recognized.
Oh and btw, Windows 7 does recognize the device as a "Kindle".
Any help would be greatly appreciated.
Sparty On!
Use the following fastboot commands:
fastboot -i 0x1949 oem idme bootmode 4000
fastboot -i 0x1949 reboot
or
adb shell idme bootmode 4000
adb this should be the way it works:
Sent from my Amazon Kindle Fire using Tapatalk 2
Thanks for the reply.
Unfortunately, I tried it and I get an invalid usage error. -i isn't a valid option. I can use -w, -s, -p, or -c.
I also obtained fastboot from the CyanogenMod Wiki for Fastboot and copied the exe to the /android-sdk/platform-tools folder and tried it. I also followed the wiki and copied it and found that placing it in the /tools/ directory wouldn't work because the missing .dll file isin the platform-tools directory and not in the tools directory.
I'm having the same problem I think since windows doesn't recognize my kindle I can't install the drivers.
AndroidSparty said:
Thanks for the reply.
Unfortunately, I tried it and I get an invalid usage error. -i isn't a valid option. I can use -w, -s, -p, or -c.
I also obtained fastboot from the CyanogenMod Wiki for Fastboot and copied the exe to the /android-sdk/platform-tools folder and tried it. I also followed the wiki and copied it and found that placing it in the /tools/ directory wouldn't work because the missing .dll file isin the platform-tools directory and not in the tools directory.
Click to expand...
Click to collapse
Us the same commands without -i 0x1949
fastboot oem idme bootmode 4000
fastboot reboot
Sent from my Amazon Kindle Fire using Tapatalk 2
ammubarak said:
Use the following fastboot commands:
fastboot -i 0x1949 oem idme bootmode 4000
fastboot -i 0x1949 reboot
or
adb shell idme bootmode 4000
adb this should be the way it works
Click to expand...
Click to collapse
None of these commands will work without first being able to communicate with the device. In order to communicate with the device you need working drivers. And even though Windows says the drivers are installed, it doesn't mean they are working.
For some reason, the Kindle Fire Utility, along with Windows is a bad combination. You could try to uninstall and delete the current drivers then reinstall OR set up your Linux to run adb and fastboot commands from the terminal.
From they way it sounds, your device is already rooted. All you need to do at this point is change the bootmode. This can easily be done in Linux as long as you are in root. For more info on bootmodes and drivers, read this thread:
http://forum.xda-developers.com/showthread.php?p=23747567
From a command prompt in windows CD over the the folder containing fast boot. One your command prompt is in that folder type fast boot devices. If it says that no devices found then you have a driver issue. What needs to be done next is open the folder containing kfu and run drivers.bat. this should install the appropriate drivers. Once this is done open kfu, select option one, then option 2. This should cause your fire to reboot in normal mode. IF that doesn't work you can push a boot.img to your fire in fast boot if for some reason you fouled up the system directory. Let me know if that does the trick first, if not I'll explain how to fastboot it back to a working condition.
Edit: in kfu select the option that says normal boot mode. Not sure if its option 2 or not. I'm not in front of my PC
Sent from my MB860 using XDA
I received mine with 6.3 and KFU wouldn't recognize it even after using the driver installation. BUT I found way around it. You need to install the drivers manually, and then KFU will work. Download the drivers, then extract the .android folder (create it if you don't have one) to
C:\Documents and Settings\YOURUSERNAME\.android open up your device manager, click on the Kindle and follow the UI to select the .android folder. Restart and use KFU. Enjoy!
soupmagnet said:
None of these commands will work without first being able to communicate with the device. In order to communicate with the device you need working drivers. And even though Windows says the drivers are installed, it doesn't mean they are working.
For some reason, the Kindle Fire Utility, along with Windows is a bad combination. You could try to uninstall and delete the current drivers then reinstall OR set up your Linux to run adb and fastboot commands from the terminal.
From they way it sounds, your device is already rooted. All you need to do at this point is change the bootmode. This can easily be done in Linux as long as you are in root. For more info on bootmodes and drivers, read this thread:
http://forum.xda-developers.com/showthread.php?p=23747567
Click to expand...
Click to collapse
Thanks for the info. I'm on my Windows box now, but i'll try the Linux directions in that URL tomorrow and will get back to you. Thanks!
backspacepc said:
From a command prompt in windows CD over the the folder containing fast boot. One your command prompt is in that folder type fast boot devices. If it says that no devices found then you have a driver issue. What needs to be done next is open the folder containing kfu and run drivers.bat. this should install the appropriate drivers. Once this is done open kfu, select option one, then option 2. This should cause your fire to reboot in normal mode. IF that doesn't work you can push a boot.img to your fire in fast boot if for some reason you fouled up the system directory. Let me know if that does the trick first, if not I'll explain how to fastboot it back to a working condition.
Edit: in kfu select the option that says normal boot mode. Not sure if its option 2 or not. I'm not in front of my PC
Sent from my MB860 using XDA
Click to expand...
Click to collapse
Good news, I ran fast boot devices without an error. Bad news, it didn't list any devices. Just sent me to another blank command line.
When I initially ran install drivers.bat through FK Utility, it installed the drivers successfully, from what it said. I just ran it again and it said the drivers were installed successfully and the driver name is Google, Inc (WinUSB).
When I ran KF Utility (run.bat), it says that the ADB Status is offline. At this point, I would think that since ADB is offline, the Utility won't work? Stupid Windows!!!
AndroidSparty said:
Thanks for the info. I'm on my Windows box now, but i'll try the Linux directions in that URL tomorrow and will get back to you. Thanks!
Good news, I ran fast boot devices without an error. Bad news, it didn't list any devices. Just sent me to another blank command line.
When I initially ran install drivers.bat through FK Utility, it installed the drivers successfully, from what it said. I just ran it again and it said the drivers were installed successfully and the driver name is Google, Inc (WinUSB).
When I ran KF Utility (run.bat), it says that the ADB Status is offline. At this point, I would think that since ADB is offline, the Utility won't work? Stupid Windows!!!
Click to expand...
Click to collapse
Actually it will, status will still be off line, just select the boot mode option, and then on the next screen select normal bootmode
Sent from my MB860 using XDA
For future reference if you want to use Linux to issue fastboot and adb commands, here's the tutorial:
http://forum.xda-developers.com/showthread.php?p=22067293
I'd suggest using Linux as it is WAY more stable and WAY more reliable.
soupmagnet said:
For future reference if you want to use Linux to issue fastboot and adb commands, here's the tutorial:
http://forum.xda-developers.com/showthread.php?p=22067293
I'd suggest using Linux as it is WAY more stable and WAY more reliable.
Click to expand...
Click to collapse
I completely agree, I use and am familiar with both and it sounded like he was trying to do it from a windows machine.
Sent from my MB860 using XDA
backspacepc said:
I completely agree, I use and am familiar with both and it sounded like he was trying to do it from a windows machine.
Sent from my MB860 using XDA
Click to expand...
Click to collapse
Actually...I'm a she.
Since I have both available to me...it sounds like I should scrap the Windows (which is an understatement anyway) and use Linux/Ubuntu. That I can do!
I'll try the Linux directions later today and will let you know how I come out. Thanks again for the help!
Edit: Okay just tried it & I still can't get adb & fastboot to recognize the device. I followed the "Enable ADB under Ubuntu/Linux" directions and still nodda.
AndroidSparty said:
I'll try the Linux directions later today and will let you know how I come out. Thanks again for the help!
Edit: Okay just tried it & I still can't get adb & fastboot to recognize the device. I followed the "Enable ADB under Ubuntu/Linux" directions and still nodda.
Click to expand...
Click to collapse
Sorry ma'am! did you also try the directions I posted for windows as far as kfu? Its starting to sound like you may not have fully flashed fff
Sent from my MB860 using XDA
backspacepc said:
Sorry ma'am! did you also try the directions I posted for windows as far as kfu? Its starting to sound like you may not have fully flashed fff
Sent from my MB860 using XDA
Click to expand...
Click to collapse
You may also want to try to rerun your root script, oddly enough I've had that work before too.
Sent from my MB860 using XDA
AndroidSparty said:
Edit: Okay just tried it & I still can't get adb & fastboot to recognize the device. I followed the "Enable ADB under Ubuntu/Linux" directions and still nodda.
Click to expand...
Click to collapse
Did you notice the second post in the Linux tutorial?
kinfauns said:
Thanks for the guide on setting this up for linux. I just wanted to point out a small error in the instructions. The echo command above is incorrect and will not do what you intended. It should be corrected to
Code:
echo 0x1949 >> ~/.android/adb_usb.ini
Click to expand...
Click to collapse
backspacepc said:
Sorry ma'am! did you also try the directions I posted for windows as far as kfu? Its starting to sound like you may not have fully flashed fff
Sent from my MB860 using XDA
Click to expand...
Click to collapse
I just ran kfu and I I was able to get it to do a normal boot. YAY!
Then I ran the .bat file in the KFU and I selected the permanent root. During the activating fastboot, it said that "Oops something went wrong...." it couldn't find the kindle. Then it installed twrp.img is missing and it downloaded successfully. So then I got the Notice, and it's installing TWRP and it's waiting for the device. I turned the Kindle off & on a few times to get the KFU to recognize the Kindle, and no luck. At least I was able to boot into the KF while it's still still waiting for the device. BUT....at this point during the TWRP install process, it's waiting for the device and not recognizing it.
soupmagnet said:
Did you notice the second post in the Linux tutorial?
Click to expand...
Click to collapse
I did, but I used vi instead of gedit. And i verified that 0x149 was in the file on a new line.
AndroidSparty said:
I did, but I used vi instead of gedit. And i verified that 0x149 was in the file on a new line.
Click to expand...
Click to collapse
I can't imagine why using vi would make any difference but you could try gedit to see if it works.
As for TWRP, you could install it manually (Windows). Make sure you have a connection with adb/fastboot and use KFU to set your device to fastboot mode. Keep in mind when you do this that you may have to go through the whole process of fixing your drivers again (blame Windows/KFU).
When you're in fastboot mode, hold the power button until the device shuts down.
Shift + right click the KFU folder that contains fastboot (tools) and open as a command
In the prompt that comes up, enter:
Code:
fastboot -i 0x1949 flash recovery /path/to/twrp2.1.img
When your prompt says "waiting for device", turn the device back on.
Make sure it's twrp 2.1 Version 2.0 is installed in a different manner and will most likely cause problems if installed with the "flash recovery" command.
_-_
phunkie123 said:
I have the latest version of twrp installed in my phone and thats about it.
I am s-off'd and unlocked.
verizion htc one
ran a full system wipe and that wiped out my .zip rom file along with it.
can someone please help me?
Click to expand...
Click to collapse
You can use adb to push a rom file to you phone storage. I found this link that should help you http://htconeroot.com/htc-one-tutorials/how-to-copy-files-to-htc-one-using-twrp-mount-and-adb/
_-_
adb
phunkie123 said:
i can access the TWRP recovery and also the fastboot. however, when trying to run ADB in my computer the device is not listed.
when running the command "adb devices". nothing gets found.
EDIT - also when i get into the ADB sideload section of TWRP, my device stays stuck at "starting ADB sideload feature..."
Click to expand...
Click to collapse
What is your PC's OS.. Where did you get adb and fastboot??
_-_
Fastboot/adb
phunkie123 said:
My PC's OS is windows 7 home premium service pack 1. the fastboot was unlocked through the firewater method. if you mean the android-sdk tools i got them here
developer.android.com/sdk/index.html?utm_source=weibolife
the fastboot still seems to work as i tried re-flashing TWRP. it was successful. but it still just seems to stay stuck at "Starting ADB sideload feature..."
Click to expand...
Click to collapse
Ok do this move everything from the folder platform-tools should be fastboot.exe and adb.exe and a few other files to the root of your c drive....
than open your CMD window as admin... make sure you open as admin... than type
Code:
cd /
to move to the root of you c dirve and then type
Code:
adb
let me know the out come of that....
_-_
phunkie123 said:
sorry for all your trouble! the reason behind my problems was that my computer needed to be restarted to refresh my drivers. i was then able to mount and push my rom through ADB. whew! thanks so much people! im booting up already. no bricks here! thanks to all of you guys!!
Click to expand...
Click to collapse
Great.... Hate to see anyone have trouble with there m7....Thx lj