I'm going crazy here and I need my phone to work!
I have an LG G3 on Verizon.
I rooted it and edited a part of build.prop to change the DPI which got the phone stuck in a boot loop and kept popping up "the process com.android.systemui has stopped.
I tried clearing cache
I tried booting in safe mode
I then did a factory reset
My phone boots up to the Setup Wizard screen but I am STILL getting that systemui error and a com.android.phone and I can't get any further than that screen.
I then tried to use the LG FlashTool to just wipe the entire ROM and replace it with the stock one from Verizon.
This gave me a "Model Information Check FAIL!" error but I DO have the right ROM for my phone. There's only one for the Verizon G3 as far as I can tell
This led me to realizing that there is something in the build.prop that's making LGFlashTool think the proper rom actually isn't right.
I then installed the Android SDK so I can ADB into my phone. but whenever I run "abd devices" nothing shows up in the list.
I was told USB Debugging needs to be turned on in order for this to work, I don't remember if it's turned on or not with my phone and I can't get past the Setup Wizard to edit anything. I wonder if ADB is even running properly on my phone or if these errors are stopping it?
I will gladly paypal someone $20 if they can get this working for me.
Did you tried this?
http://forum.xda-developers.com/showthread.php?t=2772199
droidhd said:
Did you tried this?
http://forum.xda-developers.com/showthread.php?t=2772199
Click to expand...
Click to collapse
yes I did, that's where I got the "Model Information Check FAIL!" error
And what about this guide (if you can enter download mode):
http://forum.xda-developers.com/showthread.php?t=2785089
8) When the firmware is downloaded, boot your LG G3 into Download Mode. To do this, press and hold the Volume Up key and then plug the USB cable.
Click to expand...
Click to collapse
One of my friends saved his phone by this guide
Download mode - LG PC Suite - Restore update error.
1. Remove battery
2. Boot phone into download mode
3. Open LG PC Suite - restore update error
This method have saved me a few times.
Will adb work in one of the recovery modes even if it wasn't enabled in the full boot mode? If so, start there.
Sent from my LGLS990 using XDA Free mobile app
Regarding your USB debugging question, you would have had to turn it on in order to root the phone originally, right? If so I imagine it would still be on unless you unchecked it. You have the proper drivers set up? Anytime I've encountered issues with adb devices not returning any results the issue has been drivers.
Good luck.
droidhd said:
And what about this guide (if you can enter download mode):
http://forum.xda-developers.com/showthread.php?t=2785089
One of my friends saved his phone by this guide
Click to expand...
Click to collapse
Yup! I tried that. I got the "Model Information Check FAIL!" error
robalm said:
Download mode - LG PC Suite - Restore update error.
1. Remove battery
2. Boot phone into download mode
3. Open LG PC Suite - restore update error
This method have saved me a few times.
Click to expand...
Click to collapse
Hey thank, I haden't tried this but just gave it a go and the program is giving me errors when I try to restore update error. I don't think it's connecting to the phone.
SilverZero said:
Will adb work in one of the recovery modes even if it wasn't enabled in the full boot mode? If so, start there.
Sent from my LGLS990 using XDA Free mobile app
Click to expand...
Click to collapse
What do you mean recovery modes? You mean like Safe mode? I actually haven't tried that. I'll give it a go.
Rodeojones said:
Regarding your USB debugging question, you would have had to turn it on in order to root the phone originally, right? If so I imagine it would still be on unless you unchecked it. You have the proper drivers set up? Anytime I've encountered issues with adb devices not returning any results the issue has been drivers.
Good luck.
Click to expand...
Click to collapse
I believe I have the proper drivers, I installed drivers and the phone is showing up in device manager as Alright.
Try hooking it up to the lg support tool and select uprade recovery.
Download and install support tool
Open tool
Plug in phone with phone on.
Top right select options/upgrade recovery
Let it do its thing.
Lg support tool
https://www.dropbox.com/s/1ckig41xdqoi2u1/B2CAppSetup.exe?dl=0
When you looked for phone in device manager did you change the port to com41? I forgot to do that and got the error in LG Flash Tool
Bro your motherboard is done with take it to service center
Hey everyone...it ended up being a stupid fix, I just tried flashing it on another computer and I didn't get the error? I have no idea why it worked.
jpf566 said:
Hey everyone...it ended up being a stupid fix, I just tried flashing it on another computer and I didn't get the error? I have no idea why it worked.
Click to expand...
Click to collapse
Oh man should've told you that. Sometimes its just a driver acting up and you have to manually delete them in the device manager. Sometimes there marked with a symbol .
please hit thanks if i helped in any way. send from my g3 d852 beast
jpf566 said:
Hey everyone...it ended up being a stupid fix, I just tried flashing it on another computer and I didn't get the error? I have no idea why it worked.
Click to expand...
Click to collapse
Sometimes it's the simplest solution that's hardest to find. Glad it all worked out for you.
So who won the 20 bucks? XD
Money's not important. The problem' fixed, this is what's important ; )
Ferindel said:
Money's not important. The problem' fixed, this is what's important ; )
Click to expand...
Click to collapse
True! that's what this forum is about :highfive:
Related
I rooted and flashed Sphinx. The ROM somehow kept me from hearing the other person on the other line when making calls and they couldn't hear me. So I was trying to unroot by using the Flashroot tool method. And now I'm stuck on download mode.
I have a d855. How do I unroot properly and how do I get out of the download mode.
This is my first time rooting an LG phone :/
Duhhrenn said:
I rooted and flashed Sphinx. The ROM somehow kept me from hearing the other person on the other line when making calls and they couldn't hear me. So I was trying to unroot by using the Flashroot tool method. And now I'm stuck on download mode.
I have a d855. How do I unroot properly and how do I get out of the download mode.
This is my first time rooting an LG phone :/
Click to expand...
Click to collapse
Hold the power button for 10 secs to reboot to normal. <<<<<<<< Depending on what you have done >>>>>>>>>>
ENSURE that no transfers or other process are in progress or you will have a bad day. I don't know what you have done on your phone but ensure you read the thread you are following completely.
Are you trying to restore to stock? There are a few threads that you need to follow exactly or you will brick your device.
Tweakecho said:
Hold the power button for 10 secs to reboot to normal. <<<<<<<< Depending on what you have done >>>>>>>>>>
ENSURE that no transfers or other process are in progress or you will have a bad day. I don't know what you have done on your phone but ensure you read the thread you are following completely.
Are you trying to restore to stock? There are a few threads that you need to follow exactly or you will brick your device.
Click to expand...
Click to collapse
The method failed, so I gave up and wanted to just reboot. Did a batter pull and was able to get to the factory reset screen, but it just loops back to download mode.
Duhhrenn said:
The method failed, so I gave up and wanted to just reboot. Did a batter pull and was able to get to the factory reset screen, but it just loops back to download mode.
Click to expand...
Click to collapse
follow this, for your variant, it should get you back on track don't forget to check the hashes as a bad download would cause it to fail.
http://forum.xda-developers.com/showthread.php?t=2785089
Duhhrenn said:
I rooted and flashed Sphinx. The ROM somehow kept me from hearing the other person on the other line when making calls and they couldn't hear me. So I was trying to unroot by using the Flashroot tool method. And now I'm stuck on download mode.
I have a d855. How do I unroot properly and how do I get out of the download mode.
This is my first time rooting an LG phone :/
Click to expand...
Click to collapse
I don't have the links to the tread where I got these from but lets just hope I don't get banned.
1) go to download mode
2) install this and download the correct .kdz file for your phone
-Modelnumber is ...
-serial number is your imei number
- wait until the download is done
3) run the lgflashtool2014.exe from this zip
-Select type= cdma
-phone mode= Diag
-reset time=33000
-Should be like this when You run it
-select kdz file= is where you need to find the kdz file you just downloaded(step 1)
-then press cse flash
-in the now pop-up window select start
-select your language
-ignore error (cannot connect to lg server)
-check progress on phone up to 100% then boots in recovery installs and restarts
-wait untill it goes to the welcom screen then you can unplug
-now the most inportant step Like my post
to enter download mode do this:
--You must switch off the device to start the process.
--Then press and hold the “Volume Up” and connect the USB cable from phone to PC.
--Use the original USB cable. Because, other device’s cable may not be detected in the Computer. So, only we recommend it to use the original-- one that you got it when you bought the phone.
--Wait for the driver installation on PC.
--Then you will get the download mode screen in your phone.
--That’s it.
I have the opposite problem, can't get into download mode haha
Sent from my LG-D855 using Tapatalk
suljo94 said:
I don't have the links to the tread where I got these from but lets just hope I don't get banned.
Click to expand...
Click to collapse
I can't find the .kdz file. I have the D85010d.
Also, i ran the original lg firmware, I also get an error saying it was unsuccessful or i may have keyed in something incorrect.
When I run perform the TOT method, I get the "device model is different".
So, d85010d was stock and I flashed sphinx d855... where they incompatible? im assuming no because the phone ran fine aside from the issue i stated on the original post.
would like more help.
Duhhrenn said:
I can't find the .kdz file. I have the D85010d.
Also, i ran the original lg firmware, I also get an error saying it was unsuccessful or i may have keyed in something incorrect.
When I run perform the TOT method, I get the "device model is different".
So, d85010d was stock and I flashed sphinx d855... where they incompatible? im assuming no because the phone ran fine aside from the issue i stated on the original post.
would like more help.
Click to expand...
Click to collapse
have you tried looking for it with the first link?
Sent from my LG-D855 using XDA Premium 4 mobile app
suljo94 said:
have you tried looking for it with the first link?
Sent from my LG-D855 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Okay, it installed but i'm stuck on the boot screen. Tried to do a factory reset, but it just loops right back to the boot screen.
But the installation completed. Does this mean I'm back to stock though and root is gone??
Same problem here with my LG G3 (F400L)
I tried everything TOT& DLL files KDZ Files no thing work for me.
I have the same problem im stuck in download mode and i cant find the kdz =O
I need to know if something can resolve this problem , my device is a lg g3 850 10 d and i installed the room sphinx for the lg D855 and was incompatible because the dialer did not work properly and try with original tot for my device and dont work with this method.. so i need the ORIGINAL KDZ for the lg G3 D850 10d know where to find???
Hey men you can find the solution of your issue?
Duhhrenn said:
Okay, it installed but i'm stuck on the boot screen. Tried to do a factory reset, but it just loops right back to the boot screen.
But the installation completed. Does this mean I'm back to stock though and root is gone??
Click to expand...
Click to collapse
i Have exactly the same problem of you... im istalling the sphinx room and try to back to stock in the 855 version and my version is 850 10 d and my phone get in a download mode don run anymore :crying:
You can ressolve finally the problem or what do you do with your phone????
Duhhrenn said:
So I was trying to unroot by using the Flashroot tool method. And now I'm stuck on download mode.
I have a d855. How do I unroot properly and how do I get out of the download mode.
Click to expand...
Click to collapse
I was in your position. Once you enter the download mode it is *almost* impossible to get out without removing the battery. I've heard a lot of suggestions like pressing the power button for 10 or 20 seconds or even doing that in combination with other keys, BUT the ultimate truth is that you have to press and keep holding power button for at least 1 minute. I didn't time exact seconds, but it was ridiculously long time. Probably it will take you less time removing the back and re-sit the battery, but personally I hate removing the back without serious reason
About the second question - I was unable to flash anything in LG's download mode. I'm using Ubuntu + virtualbox (Windows 7 inside), but due to issues with drivers and/or virtualbox and/or usb port forwarding I was unable to reliably connect and flash the stock kdz image. Fortunately I've sent the phone back to the LG repair office and they re-flashed the firmware for me.
---------- Post added at 04:46 PM ---------- Previous post was at 04:41 PM ----------
masmusica said:
so i need the ORIGINAL KDZ for the lg G3 D850 10d know where to find???
Click to expand...
Click to collapse
It is not exactly what you want, BUT at least you can get your latest, official KDZ file from LG.
Open in browser the following URL, but replace the xxxxxxxxx
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=xxxxxxxx
where xxxxxxxx is your IMEI number
As a result you'll get an XML file that will contain the location of your latest KDZ update, which should look something like this:
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=.../D85510L_00.kdz
how to fix download mode
for all lg phones but if you are not lg user you can contact me for any phone software issues
try freepcforanything.blogspot
1. add .com at the end of the link
2. and choose software solution (right side you can see)
3. fix all software related issues.
---------- Post added at 04:16 PM ---------- Previous post was at 04:09 PM ----------
al-motamel said:
Same problem here with my LG G3 (F400L)
I tried everything TOT& DLL files KDZ Files no thing work for me.
Click to expand...
Click to collapse
you can try reinstall software and it will work for sure and also without loosing you data i can't send direct link cause i m new user
just follow the steps
1. open browser and type freepcforanything.blogspot+.in/2015/08/software-solution.html
2. copy link and past in address bar just remove + and enter
Solution- Lg G3 Stuck in download mode.
USE TOT as describes in given link. But using USB 2.0 , it works for me on korean ver. F400S. Don't use USB 3.0
forum.xda-developers.com/showthread.php?t=2785089
BioVolt said:
I have the opposite problem, can't get into download mode haha
Sent from my LG-D855 using Tapatalk
Click to expand...
Click to collapse
If you can't get in that, then something very serious happened!
you sure you can't enter it?
Otherwise, it would mean you messed up the bootloader!
Did you fix your phone?
al-motamel said:
Same problem here with my LG G3 (F400L)
I tried everything TOT& DLL files KDZ Files no thing work for me.
Click to expand...
Click to collapse
i am also having lg g3 F4ooL
installed cloudy g3
soft bricked
boot looping
when i enter into download mode
flashtool says an error that
*cant change to Download mode*
Download fail
what can i do?
Hi guys, i know it's an old post but i get the same issue.
I was following this tutorial https://linustechtips.com/main/topic/1058206-lg-g3-lineageos-tutorial/
I was on lollipop.
I initially downgraded to kitkat (V10e) using LG UP and then rooted with purple drake.
In the following reboots, "kernel error" occurred.
So I tried to flash the kitkat stock version again but without success.
I'm stuck in download mode and tried to flash both the kitkat version, the lollipop and the marshmallow, through .tot and .kdz, I tried both with LG UP, LG Flash tools v 1.8 and with LG flash Tools 2014 but in all cases unsuccessful because the phone reboots before it ends.
Now I don't know what to try anymore. Do you have any solution, please?
Thanks in advance.
Hi all, I come to you as my last resort.
I have spent hours on google trying to find a solution to my problem.
This is what happened.
I store my ROMS on an external SD and sometimes i get the error that it is being removed unexpectedly...sometimes..anyway.
I booted into my TWRP and went to flash DarkKnights ROM..this ROM was something like 1.7 GB i think and after completely wiping the device (System, data and cache) i proceeded to flash the new rom..However it flashed very very quickly which i found strange but proceeded to restarting my device.
After that my phone has been completely dead!
What i think happened is that the EXTERNAL SD malfunctioned during the installation and im left with absolutely nothing on my phone.
I cannot enter recovery or download mode!
The only sign of life is when i plug it into my computer and it installs a driver that is the androidnet driver not the qualcom driver that some people have had and fixed.
I am open to any suggestions as you truly are my last resort.
Haven't really got much to say in the way of helping you mate, sounds like you're in a real Pickle :/
I'm sure someone here has a solution, there'd surely be SOME way to resolve it, we've got some pretty talented devs that do some amazing stuff so someone should be able to help ya somewhere.
All the best man, if you need help we're here
Look at here : http://forum.xda-developers.com/sprint-lg-g3/help/bricked-ls990-access-recovery-download-t3053985/post60106965#post60106965
try fastboot mode.
For that install this : http://forum.xda-developers.com/showthread.php?t=2588979&nocache=1
after you can apply fastboot commands
If you want to find custom recovery, flash kitkat aboot, kitkat laf and twrp recovery
you can have all this files in this post : http://forum.xda-developers.com/lg-g3/general/d855-one-click-root-twrp-recovery-t3072767/post59895642#post59895642
Download the script and extract it. In the folder there are all files (aboot, laf and recovery)
But of course , the fastboot command has to work ...
After that you should find recovery and download mode
Fastboot doesnt work for D855...
You can try flashing the TOT file with the old LG Flash Tool but im doubtful it will work
Are you sure you have no recovery access by Power+Vol—
jac10000 said:
Look at here : http://forum.xda-developers.com/sprint-lg-g3/help/bricked-ls990-access-recovery-download-t3053985/post60106965#post60106965
try fastboot mode.
For that install this : http://forum.xda-developers.com/showthread.php?t=2588979&nocache=1
after you can apply fastboot commands
If you want to find custom recovery, flash kitkat aboot, kitkat laf and twrp recovery
you can have all this files in this post : http://forum.xda-developers.com/lg-g3/general/d855-one-click-root-twrp-recovery-t3072767/post59895642#post59895642
Download the script and extract it. In the folder there are all files (aboot, laf and recovery)
But of course , the fastboot command has to work ...
After that you should find recovery and download mode
Click to expand...
Click to collapse
I will try as soon as possible and let you know if anything happens!
itsbighead said:
Fastboot doesnt work for D855...
You can try flashing the TOT file with the old LG Flash Tool but im doubtful it will work
Click to expand...
Click to collapse
I will keep that in mind as well thank you!
jac10000 said:
Are you sure you have no recovery access by Power+Vol—
Click to expand...
Click to collapse
Yes im sure! my phone is completely dead and the only sign of life as i said is when the driver gets installed on the computer when i plug it in.. Thank you for your reply though.
Try LG mobile support tool (old version) : http://tool.xcdn.gdms.lge.com/client/app/B2CAppSetup.exe
Even if you have not download mode, you can try. Install the tool
Try to boot on download mode, you have error message
run LG mobile support tool
choose Additional functions then Upgrade of the recovery after error
At one moment the tool will say that there is not of g3 connected, reattempts starting in download mode or presses on the button to power. Try several times both.
If it work, the software is going to download the last one kdz available for your device and him(it) to fall in love by following
You can always try this solution, with a little luck ...
I have tried all your suggestions but i still have no luck..i tried the tot method as well and it comes up with an error message of 'download fails'..there must be some way to fix this!!im left with the driver AndroidNet being installed on the computer and a phone that cannot enter recovery or download mode. however i can hear the phone working on the inside if i listen closely..if you have any other suggestions please share!
Update:
I was playing around with the phone and when i plugged it into the computer the screen came on and showed me battery low..also the led light on top started flashing red as it does when the phone's battery is low..I dont know if this will help in finding a fix but im hopeful.. :/
HELP
PeterGeorgiou said:
Update:
I was playing around with the phone and when i plugged it into the computer the screen came on and showed me battery low..also the led light on top started flashing red as it does when the phone's battery is low..I dont know if this will help in finding a fix but im hopeful.. :/
Click to expand...
Click to collapse
What had you done to wake up the screen and led light.. plz let me know.. because i have the same situation like you before rite now.. Please i need your help ! thank you
li545044579 said:
What had you done to wake up the screen and led light.. plz let me know.. because i have the same situation like you before rite now.. Please i need your help ! thank you
Click to expand...
Click to collapse
Hello my friend..All i did was plug the wire into the computer and then into my phone..and because my battery was very low the screen turned on and showed me the battery low screen..then the led started flashing..and finally the phone switched off completely..Thankfully i have another battery to continue my testing and trying to fix it..but apart from that that happened with the battery im back to square one where my phone is completely dead again and the only response i get is the AndroidNet USB driver being installed on the computer.
PeterGeorgiou said:
Hi all, I come to you as my last resort.
I have spent hours on google trying to find a solution to my problem.
This is what happened.
I store my ROMS on an external SD and sometimes i get the error that it is being removed unexpectedly...sometimes..anyway.
I booted into my TWRP and went to flash DarkKnights ROM..this ROM was something like 1.7 GB i think and after completely wiping the device (System, data and cache) i proceeded to flash the new rom..However it flashed very very quickly which i found strange but proceeded to restarting my device.
After that my phone has been completely dead!
What i think happened is that the EXTERNAL SD malfunctioned during the installation and im left with absolutely nothing on my phone.
I cannot enter recovery or download mode!
The only sign of life is when i plug it into my computer and it installs a driver that is the androidnet driver not the qualcom driver that some people have had and fixed.
I am open to any suggestions as you truly are my last resort.
Click to expand...
Click to collapse
You could try this method :- http://forum.xda-developers.com/showthread.php?t=2831668
Make sure your Battery is charged and hope and pray your Phone will have USB Debugging enabled.
Good luck and tell us how you progress, if at all.....:fingers-crossed:....
Same Problem
PeterGeorgiou said:
Hello my friend..All i did was plug the wire into the computer and then into my phone..and because my battery was very low the screen turned on and showed me the battery low screen..then the led started flashing..and finally the phone switched off completely..Thankfully i have another battery to continue my testing and trying to fix it..but apart from that that happened with the battery im back to square one where my phone is completely dead again and the only response i get is the AndroidNet USB driver being installed on the computer.
Click to expand...
Click to collapse
Hi friend, yeah, that was low battery screen pop out. Doesn't help after you charge you phone. And also, i getting theLGE AndroidNet USB driver just like you. i still keep searching up for solution. Hope it can fix it as soon as possible. I am so thankful for your suggestion. Thank you
573v3 said:
You could try this method :- http://forum.xda-developers.com/showthread.php?t=2831668
Make sure your Battery is charged and hope and pray your Phone will have USB Debugging enabled.
Good luck and tell us how you progress, if at all.....:fingers-crossed:....
Click to expand...
Click to collapse
thank you for your post but the link is dead..also my phone cannot be recognized in order to use fasttboot. :/
HI, friend, have you find any solution yet.. ? i tried, but still cant fine one. Hope people can upload a solution to solve that.
li545044579 said:
HI, friend, have you find any solution yet.. ? i tried, but still cant fine one. Hope people can upload a solution to solve that.
Click to expand...
Click to collapse
Nothing yet..im still searching and trying every possible method there is but no luck
PeterGeorgiou said:
Nothing yet..im still searching and trying every possible method there is but no luck
Click to expand...
Click to collapse
You can explore this solution : http://forum.xda-developers.com/showthread.php?t=2582142
It's for the G2 but can be adaptable for G3 ...
jac10000 said:
You can explore this solution : http://forum.xda-developers.com/showthread.php?t=2582142
It's for the G2 but can be adaptable for G3 ...
Click to expand...
Click to collapse
Don't get it with >>>>Open terminal in ubuntu then type: do i open terminal in computer or in the phone. If open in the phone, its impossible because the problem we had right now is when we connect the phone with PC, the only thing show up on computer is LGE AndroidNet USB Serial Port. but our phone screen still off even the system is boot in.
jac10000 said:
You can explore this solution : http://forum.xda-developers.com/showthread.php?t=2582142
It's for the G2 but can be adaptable for G3 ...
Click to expand...
Click to collapse
Thank you very much for the thread you posted..i tried it but the thing is..my phone has literally nothing on it so when i put each file manually into the phone i dont know which sdb to put it through to..as the thread says it should give a lost of all the system partition files but since my one doesnt have anything on the phone it does not find them...
However, i did manage to establish a connection between the phone and the terminal in linux so im thinking maybe i have to flash each file manually that i can get from a system dump of a g3 and maybe thay will work..what do you think??
PeterGeorgiou said:
Thank you very much for the thread you posted..i tried it but the thing is..my phone has literally nothing on it so when i put each file manually into the phone i dont know which sdb to put it through to..as the thread says it should give a lost of all the system partition files but since my one doesnt have anything on the phone it does not find them...
However, i did manage to establish a connection between the phone and the terminal in linux so im thinking maybe i have to flash each file manually that i can get from a system dump of a g3 and maybe thay will work..what do you think??
Click to expand...
Click to collapse
Here the same method on Windows : http://forum.xda-developers.com/lg-g2/general/choise-unbrick-qhsusbbulk-qualcomm-9006-t3093844
Yes if you can establish a connection between the phone with the Terminal (linux) or AOMEI Partition Assistant (windows) , you can flash the partitions (aboot, boot, laf) to have after download mode and then apply a kdz
other method ... http://forum.xda-developers.com/lg-g3/general/unbrick-lg-g3-qhsusbbulk-qualcomm-9008-t3072091
and can be ... : http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
I flashed Fulmic rom for my G3 D855 today. Everything was well when I discovered until I discovered, that camera app is not showing. The fix was to download the fix from Fulmics app and flash it via TWRP. I downloaded the fix and rebooted to install the fix. After reboot I got stuck in bootloop, when I try to access recovery, it goes to TWRP first logo and stays there. Nothing happens. When I try to access download mode, it shows the first download mode logo and stays there. Computer detects the phone in device manager as "LGE Android MTP Device". LGUP shows model as "Unknown". Cant do nothing more. Every help is appreciated.
Are you sure you flashed the fix ? Because it seems like you flashed something else that messed up your device
BrosseLi said:
Are you sure you flashed the fix ? Because it seems like you flashed something else that messed up your device
Click to expand...
Click to collapse
I downloaded the fix, then tried to install it via twrp. But twrp didn't start. So I ran AutoRec again to reinstall TWRP which seemed to go well. Forgot to mention this on first post. After reinstalling TWRP the problems occurred.
RobinNewToGalaxy said:
I downloaded the fix, then tried to install it via twrp. But twrp didn't start. So I ran AutoRec again to reinstall TWRP which seemed to go well. Forgot to mention this on first post. After reinstalling TWRP the problems occurred.
Click to expand...
Click to collapse
Autorec goes on STOCK untouched roms.
bender_007 said:
Autorec goes on STOCK untouched roms.
Click to expand...
Click to collapse
Yes, I know that now
But any idea how to fix it now?
RobinNewToGalaxy said:
Yes, I know that now
But any idea how to fix it now?
Click to expand...
Click to collapse
Let´s see:
-can´t enter twrp ?
-can´t enter download mode ? (volume up and connect to pc)
bender_007 said:
Let´s see:
-can´t enter twrp ?
-can´t enter download mode ? (volume up and connect to pc)
Click to expand...
Click to collapse
Can't enter twrp, just shows TEAMWIN logo with blue background and stripes. Nothing more happens.
Download mode text shows up, pc makes connection sound but I dont know what to do after that. I tried using LGUP but that showed that model is "Unknown".
Ah, try lg flash tool 2014 or lg flashtool (and a tot file), find a thread by hyelton (lg g3 get back to stock), this will help you
RobinNewToGalaxy said:
Can't enter twrp, just shows TEAMWIN logo with blue background and stripes. Nothing more happens.
Download mode text shows up, pc makes connection sound but I dont know what to do after that. I tried using LGUP but that showed that model is "Unknown".
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=1WgXuxDbmbc this video should help you if you can enter download mode
bender_007 said:
Ah, try lg flash tool 2014 or lg flashtool (and a tot file), find a thread by hyelton (lg g3 get back to stock), this will help you
Click to expand...
Click to collapse
I have tried this method also. Every time at 4% it says, error, remove battery and then reconnect and turn on phone. After that, connection with pc is lost.
Also, when I try to get to Download Mode, it should go then to Firmware update screen to? Am I right about that? If so, then it doesn't go to Firmware update screen.
But I tried it with a kdz I had in my computer and had used before. Downloading .tot file atm.
RobinNewToGalaxy said:
I have tried this method also. Every time at 4% it says, error, remove battery and then reconnect and turn on phone. After that, connection with pc is lost.
Also, when I try to get to Download Mode, it should go then to Firmware update screen to? Am I right about that? If so, then it doesn't go to Firmware update screen.
But I tried it with a kdz I had in my computer and had used before. Downloading .tot file atm.
Click to expand...
Click to collapse
did you change the port to com41?
oh, youre downloading the .tot file now, yeah just use the lg flash tool like the dude in the video says it should work if you can enter download mode and it detects the phone, just follow the steps i did it like 2 days ago
STM75 said:
did you change the port to com41?
oh, youre downloading the .tot file now, yeah just use the lg flash tool like the dude in the video says it should work if you can enter download mode and it detects the phone, just follow the steps i did it like 2 days ago
Click to expand...
Click to collapse
it seems to have stopped in LG Flash Tool, where it is saying "Waiting for connection". It has been so for 15 minutes now :crying:
RobinNewToGalaxy said:
it seems to have stopped in LG Flash Tool, where it is saying "Waiting for connection". It has been so for 15 minutes now :crying:
Click to expand...
Click to collapse
did you watch the whole video? try to remove the cable and then put it in a few sec
STM75 said:
did you watch the whole video? try to remove the cable and then put it in a few sec
Click to expand...
Click to collapse
i didn't find a video but a text and pics tutorial which also stated to remove the cable which i did. The "Waiting fo r Connection" text appears after I remove the cable.
RobinNewToGalaxy said:
i didn't find a video but a text and pics tutorial which also stated to remove the cable which i did. The "Waiting fo r Connection" text appears after I remove the cable.
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=1WgXuxDbmbc i sent it before too
STM75 said:
https://www.youtube.com/watch?v=1WgXuxDbmbc i sent it before too
Click to expand...
Click to collapse
Did everything same like in the video but it still stays in "Waiting.." status.
RobinNewToGalaxy said:
Did everything same like in the video but it still stays in "Waiting.." status.
Click to expand...
Click to collapse
are you using a original lg cable? maybe try a diffrent usb port? if youre using a 3.0 port it might not work.
STM75 said:
are you using a original lg cable? maybe try a diffrent usb port? if youre using a 3.0 port it might not work.
Click to expand...
Click to collapse
Original cabel yes, tried another one also. Tried another usb port to, for some reason, it doesn't go to download mode in one port.
RobinNewToGalaxy said:
Original cabel yes, tried another one also. Tried another usb port to, for some reason, it doesn't go to download mode in one port.
Click to expand...
Click to collapse
you changed the port to com41?
RobinNewToGalaxy said:
Original cabel yes, tried another one also. Tried another usb port to, for some reason, it doesn't go to download mode in one port.
Click to expand...
Click to collapse
Also it stays in download mode screen, not Firmware update screen. I don't know if this affects anything.
Hi guys,
i recently use layers for my xenonhd rom (lg f400LL)
and then i reboot then boom it goes bootloop
what i have to do?i hardbrick my phone recently and i fix that by doing the shorwire method
but rightnow i use LGUP but it says that:
http://imgur.com/KTK9Vrb
i can still access download mode but i have problems on accessing the twrp recovery because it always boot on the bootloop,i mean
i have problems on using hardware keys to access twrp.
Sir pls help me
Stiffmeistro said:
Hi guys,
i recently use layers for my xenonhd rom (lg f400LL)
and then i reboot then boom it goes bootloop
what i have to do?i hardbrick my phone recently and i fix that by doing the shorwire method
but rightnow i use LGUP but it says that:
http://imgur.com/KTK9Vrb
i can still access download mode but i have problems on accessing the twrp recovery because it always boot on the bootloop,i mean
i have problems on using hardware keys to access twrp.
Sir pls help me
Click to expand...
Click to collapse
I didn't had the same issue as you, but had a similiar one (phone didn't get discovered neither by LGUP nor LG Flash Tool). Yesterday I fixed it by following this guide:
http://forum.xda-developers.com/showthread.php?t=2785089
In particular the part where you change your device to COM41 in the device manager.
After you get it discovered by LG Flash Tool flash an official KDZ.
Reboot the phone and connect it to your Windows, allow the connection from the phone screen.
It should promt you to install drivers on the computer, do that (they are different from LG Drivers you download from the web mind you)
Now you can change your COM port back to 3 and everything should be fully discoverable by both LGUP and LG Flash Tool.
I think I replied to you on reddit (same photo) Have you tried plugging the phone in while in download mode ? Did you try installing drivers from the internet ? Coz thats how I fixed the same problem you have.
Fluffywolf said:
I think I replied to you on reddit (same photo) Have you tried plugging the phone in while in download mode ? Did you try installing drivers from the internet ? Coz thats how I fixed the same problem you have.
Click to expand...
Click to collapse
engmia said:
I didn't had the same issue as you, but had a similiar one (phone didn't get discovered neither by LGUP nor LG Flash Tool). Yesterday I fixed it by following this guide:
http://forum.xda-developers.com/showthread.php?t=2785089
In particular the part where you change your device to COM41 in the device manager.
After you get it discovered by LG Flash Tool flash an official KDZ.
Reboot the phone and connect it to your Windows, allow the connection from the phone screen.
It should promt you to install drivers on the computer, do that (they are different from LG Drivers you download from the web mind you)
Now you can change your COM port back to 3 and everything should be fully discoverable by both LGUP and LG Flash Tool.
Click to expand...
Click to collapse
Hey Bro'ssss
now i am stuck on the recovery
i always flash the rom but when i boot it always go to the recovery(twrp)
Stiffmeistro said:
Hey Bro'ssss
now i am stuck on the recovery
i always flash the rom but when i boot it always go to the recovery(twrp)
Click to expand...
Click to collapse
The method I'm describing uses Download Mode so it should work for you.. Try it and tell us the result
engmia said:
The method I'm describing uses Download Mode so it should work for you.. Try it and tell us the result
Click to expand...
Click to collapse
Thanks man its all ok now
i dont have time to explained what i did but it works
Many thanks to all of you
hey guys, LGUP will not see my phone at all(LGV10) its in download mode , but does not come up. its stuck on LG boot screen and wont go past it. any help would be appreciated... I am, or was rooted anyway, and trying to reflash again. need to in order to fix it now. thanx
1SouthernCanuck said:
hey guys, LGUP will not see my phone at all(LGV10) its in download mode , but does not come up. its stuck on LG boot screen and wont go past it. any help would be appreciated... I am, or was rooted anyway, and trying to reflash again. need to in order to fix it now. thanx
Click to expand...
Click to collapse
Just read over the thread, it's what it's here for.
Stiffmeistro said:
i dont have time to explained what i did but it works
Click to expand...
Click to collapse
You asked for other people's time to help you, but now you don't have time to explain how you made it work?
Yeah... there MIGHT be other people with the same problem, but why would you care to share.
What an as*hole you are. Another typical new buttuser ruining a great dev community.
exactly
leandeganis said:
You asked for other people's time to help you, but now you don't have time to explain how you made it work?
Yeah... there MIGHT be other people with the same problem, but why would you care to share.
What an as*hole you are. Another typical new buttuser ruining a great dev community.
Click to expand...
Click to collapse
Exactly, here I am running around in circles over this BOOST Stylo 2, just got it with MM 6.0.1 out of the box 2 days ago. I caught the 454.4mb update it has been trying to do! Got that baby downloaded! 1.02gb unzipped and renamed to kdz. Got a script for Terminal that will replace Kingroot's temp root with SuperSU but I am not going to attempt any further until I know LGUP will recognize and flash my .zip the bas****s deem not worth enough to put up for download on LG's site!
I got LGUP to recognize it in download mode, reads out LGLS775 but still says it cannot open it...............
His info on how he got it to work would prolly have solved this dillema..............
oh well
zach
ok had a LG G3 that's done this- as long as you can get download mode it should recover, YOU need to use the LG mobile support tool from LG website ( LG UP sees phone as unknown model ) run LG mobile Support tool and in option choose UPGRADE RECOVERY . follow instructions and allow to start process, it took 57 minutes to repair my phone - it will seem frozen anywhere from 0% to about 22% JUST WAIT IT OUT!! lg up / twrp flashes in 5 to 10 mins -- the LG m.s.t writes block by block and takes 1 hour +
so hints and info took 3 goes to find and start upgrade recovery - error on a couple of attempts. phone seems frozen around 10% and 15% of firmware upload -- go make a coffee drink it, go pee then come back and worry! A watched pot never boils!....
Stiffmeistro said:
Thanks man its all ok now
i dont have time to explained what i did but it works
Many thanks to all of you
Click to expand...
Click to collapse
please tell me how to solved your problem my D682 deivce is always opening on recovery but there is no recovery menu just android robot
I have same issue as op described .After unbrick my g3 f400s by short wire method i get error at 94% in tot method and red screen show these word error wrong qem =0 .After remove and put battery again mobile runing but without baseband and null imei .Plz help i need really help
Same here. LGUP Says it is not recognized, even if it says it's a LG G3 855... Trying the LG Mobile Support Tools -> UPGRADE RECOVERY using my Model/serial.
Downloading right now...
Hope it works.
I will tell you when/if I got it to work
Also: Stiffmeistro you're a ****...
---------- Post added at 03:33 AM ---------- Previous post was at 03:22 AM ----------
Sedado77 said:
Same here. LGUP Says it is not recognized, even if it says it's a LG G3 855... Trying the LG Mobile Support Tools -> UPGRADE RECOVERY using my Model/serial.
Downloading right now...
Hope it works.
I will tell you when/if I got it to work
Also: Stiffmeistro you're a ****...
Click to expand...
Click to collapse
It didn't. It's EVEN MORE broken :'(
I figured out how to get my PC to recognize my D851. Apparently all the LG software didn't like how many COM ports I have. As soon as I unplugged everything else from my PC, the software worked. In this case, it was LG Flash Tool 2014, but I couldn't get any of them to work before.
Try running LGUP as Admin!!! For me it worked!
Try running LGUP as Admin!!! For me it worked!
Thankx Bro Its Work
engmia said:
The method I'm describing uses Download Mode so it should work for you.. Try it and tell us the result
Click to expand...
Click to collapse
Hope someone can help me. I flashed a rom for a d855, d855g30 I think, and although I can access download mode all aps for flashing fail saying it's the wrong model number. Even the generic DLL file cant trick it. It still starts booting the rom but boot loops before entering. I no longer have twrp and when I try to do safe mode or factory reset I get a boot validation error or something similar. Just seem to be stuck. Im using a VS985.
One cause of LGUP "UNKNOWN"
While an old thread, it'll be found in searches. For anybody who gets "UNKNOWN" device with LGUP for the LG G3, I found that LGUP for the G3 is often distributed with the wrong DLL file. See the details here, post #11. After installing LGUP, make sure that the "model" subdirectory in the LGUP program directory is the same number as the processor in your phone, in my case c:\Program Files (x86)\LG Electronics\LGUP\model\8974 (was 8994 with the "LGUP for G3" I downloaded).
HTH
Hey all, I think I broke my G4 h811 , but not at all because I can access to download mode, the problem is that when I try to open LGUP or LG flash tools, my LG appears as UNKNOW MODEL, and because of that I can´t install the kdz file, I tried to re install all the drives and so on, I am working in a win 10 laptop. Someone that can help me. Thanks!!! I will be waiting for a answer.
Enable usb debugging mod in settings>developer options. And also make sure that you have all the lg drivers installed and working. I am sure you will be fine.
fncalderong said:
Hey all, I think I broke my G4 h811 , but not at all because I can access to download mode, the problem is that when I try to open LGUP or LG flash tools, my LG appears as UNKNOW MODEL, and because of that I can´t install the kdz file, I tried to re install all the drives and so on, I am working in a win 10 laptop. Someone that can help me. Thanks!!! I will be waiting for a answer.
Click to expand...
Click to collapse
Try using LGBridge and clicking the update error recovery.
You are coming from an international rom right?
change port number. or task manager adb kill
mdau said:
Enable usb debugging mod in settings>developer options. And also make sure that you have all the lg drivers installed and working. I am sure you will be fine.
Click to expand...
Click to collapse
Thanks for answering, Unfortunately I can´t access to android just Download mode
Vseprz said:
Try using LGBridge and clicking the update error recovery.
You are coming from an international rom right?
Click to expand...
Click to collapse
I am coming from a rooted T-Mobile rom, all happened because I change the file build.prop :/, I tried LGBridge but nothing
ToreqLex said:
change port number. or task manager adb kill
Click to expand...
Click to collapse
thanks for answering, I already changed port number to 41, what do you mean with task manager adb kill ?
fncalderong said:
I am coming from a rooted T-Mobile rom, all happened because I change the file build.prop :/, I tried LGBridge but nothing
Click to expand...
Click to collapse
And you no longer have recovery mode?
Vseprz said:
And you no longer have recovery mode?
Click to expand...
Click to collapse
I can access by VOL- & Power with factory data reset options, I tried but nothing change
fncalderong said:
I can access by VOL- & Power with factory data reset options, I tried but nothing change
Click to expand...
Click to collapse
So using the hardware buttons, and clicking yes through the factory reset confirmation does not boot you into recovery mode? Did you format your internal memory?
Vseprz said:
So using the hardware buttons, and clicking yes through the factory reset confirmation does not boot you into recovery mode? Did you format your internal memory?
Click to expand...
Click to collapse
using hardware buttons and clicking yes the phone just restarted and that´s it. I didn´t format my internal memory. I was trying to fix my phone by using kdz files but the problem is that the programs as lg flash tool and LGUP don´t recognize the model of my lg g4.
fncalderong said:
using hardware buttons and clicking yes the phone just restarted and that´s it. I didn´t format my internal memory. I was trying to fix my phone by using kdz files but the problem is that the programs as lg flash tool and LGUP don´t recognize the model of my lg g4.
Click to expand...
Click to collapse
What firmware were you on? What message did LGBridge say when you tried error update recovery?
I have the same problem with my H815 and Windows 10. All drivers are set up correctly. In device manager, I can see the device and ADB Device, but LGUP won't recognize my G4. Obviously, LGUP is buggy...
Is there any better tooling to upgrade to a more recent ROM? Otherwise, I really would have to change to CM13 - upgrading is very easy and not any nasty USB stuff what in the end may not work at all...
Vseprz said:
What firmware were you on? What message did LGBridge say when you tried error update recovery?
Click to expand...
Click to collapse
I am porting the h811 20i, LGBridge say just that there are not update errors that can be recovered
Maheshwara said:
I have the same problem with my H815 and Windows 10. All drivers are set up correctly. In device manager, I can see the device and ADB Device, but LGUP won't recognize my G4. Obviously, LGUP is buggy...
Is there any better tooling to upgrade to a more recent ROM? Otherwise, I really would have to change to CM13 - upgrading is very easy and not any nasty USB stuff what in the end may not work at all...
Click to expand...
Click to collapse
But I can´t even access to android :/
fncalderong said:
Hey all, I think I broke my G4 h811 , but not at all because I can access to download mode, the problem is that when I try to open LGUP or LG flash tools, my LG appears as UNKNOW MODEL, and because of that I can´t install the kdz file, I tried to re install all the drives and so on, I am working in a win 10 laptop. Someone that can help me. Thanks!!! I will be waiting for a answer.
Click to expand...
Click to collapse
Download this driver. This will help you.
I am new to this forum so I can not link, but you have to look for LG driver version 3.14.1
I had the same problem today and it helped me.
Good luck
JanMarty said:
Download this driver. This will help you.
I am new to this forum so I can not link, but you have to look for LG driver version 3.14.1
I had the same problem today and it helped me.
Good luck
Click to expand...
Click to collapse
Thanks, but I installed the drive and nothing is still Unknow model for LGUP :/