////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
FAQ
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
MOTOROLA PATCHED THE FAKEID, FUTEX & TRUST ZONE EXPLOITS ON THE 182/183.46.15 RAZR M FIRMWARE & THE .10 MOTO LUGE FIRMWARE.
AS OF NOW, THERE IS NO KNOWN BOOTLOADER UNLOCK EXPLOIT FOR THE 182 / 183.46.15 RAZR M FIRMWARE OR THE .10 MOTO LUGE FIRMWARE.
----------------------------------------------------------------------------------
IMPORTANT
----------------------------------------------------------------------------------
If your device is on stock Jelly Bean 4.1.2 firmware, you have the JB Bootloader (JBBL) - If your device is on stock KitKat 4.4.2 firmware, you have the KK Bootloader (KKBL)
Once your bootloader is unlocked, it can not be re-locked - Say goodbye to any warranties you may have.
Once your bootloader is unlocked, you can accept any and all firmware updates.
Once your bootloader is unlocked, you can flash any and all Razr M / Moto Luge firmware.
In order to receive and install System Updates you will need to be using 100% stock untouched firmware. (Stock system & recovery)
You can not downgrade with a locked bootloader. You can only flash current or updated firmware.
-----------------------------------------------------------------------------------
UNLOCKING THE BOOTLOADER ALLOWS YOU TO
-----------------------------------------------------------------------------------
Use a custom recovery and make NANDroid back-ups.
Root your device by flashing Superuser through a custom recovery. - No exploits needed
Deodexed your system and use custom themes/mods.
Use custom ROMs/Firmware..
Downgrade firmware.
Use custom kernels.
Move updated system apps back to the system partition which saves user space.
Use and modify your device anyway you want.
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
REQUIREMENTS
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
Motorola Device Manager installed [DOWNLOAD] - This insures that you have all the proper drivers installed
Stock KitKat firmware
Windows PC or Laptop
OEM USB cable
USB 2.0 port
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
EXTRAS
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
----------------------------------------------------------------------------------
MFASTBOOT SETUP
----------------------------------------------------------------------------------
For easy use
Windows Set-Up
Mfastboot does work with both Linux & Mac
Download Mfastboot [MIRROR]
Extract contents into a folder and place it into your Local Disk (C
Code:
[COLOR="Red"]Example[/COLOR] - [I]C:/ANDROID/Mfastboot[/I]
Open start menu and type CMD
Right click on CMD > select copy
Paste into Mfastboot folder
Finished
----------------------------------------------------------------------------------
BOOTING OPTIONS
----------------------------------------------------------------------------------
Once rooted, you can use a app like Quick Boot to perform these actions.
Reboot
Code:
Power + Volume Down
Reboot AP Fastboot
Code:
During [COLOR="Blue"]Reboot[/COLOR] > press and hold Volume Down
Reboot Recovery
Code:
During [COLOR="blue"]Reboot[/COLOR] > press and hold Volume Up
Bootloader Menu
Code:
During [COLOR="blue"]Reboot[/COLOR] > press and hold Volume Up + Down
----------------------------------------------------------------------------------
DEBLOAT LIST
----------------------------------------------------------------------------------
MUST HAVE ROOT
These apps (APK/ODEX) are safe to delete, freeze or rename.
SYSTEM > APP
Code:
3c_main.apk
Amazon_Audible.apk
Amazon_IMDb.apk
Amazon_Mobile.apk
Amazon_mp3.apk
Amazon_zappos.apk
Amazon_Zipaligned.apk
atfwd.apk (Wireless Display - Razr M/HD doesn't support wireless display)
BasicDreams.apk
Books.apk
Bug2GoStub.apk
com.gotv.nflgamecenter.us.lite.apk
com.motorola.android.nativedropboxagent.apk
com.motorola.android.settings.diag_mdlog.apk
Facebook.apk
FaceLock.apk
FastDormancy.apk (CDMA, unsure about GSM)
Galaxy4.apk
GoogleEars.apk
GoogleEarth.apk
GooglePinyinIme.apk
HoloSpiralWallpaper.apk
HotspotLauncher.apk
HPLegacyPlugin.apk
Kindle.apk
LiveWallpapers.apk
Magazines.apk
MagicSmokeWallpapers.apk
ModemStatsService.apk
MotionTrigger.apk (SmartActions Requirement)
MotVzwLocationService.apk
PhaseBeam.apk
PlayGames.apk
PlusOne.apk
ProgramMenu.apk
ProgramMenuSystem.apk
Protips.apk
Quickoffice.apk (Abandon by Google)
SlackerRadio.apk
Street.apk
Videos.apk
VisualizationWallpapers.apk
VMwareReady.apk (Corprate Crapware)
VSuiteApp.apk
vznavigator.apk
VZWAPNLib.apk
vzwapnpermission.apk
VZWAPNService.apk
VzwSystemUiExt.apk
YouTube.apk
Zap.apk
SYSTEM > PRIV-APP
Code:
3c_checkin.apk
3c_devicemanagement.apk
3c_notification.apk
3c_ota.apk
3c_sso.apk
Amazon_Appstore.apk
android-syncservice-app.apk
cce.apk
CircleWidget3D.apk
Cmas.apk
DemoMode.apk
Favorites.apk
FileManager.apk
GuideMe.apk
HomeConfig.apk ([COLOR="Red"]Need a Home Launcher installed before removing[/COLOR])
Homescreen.apk ([COLOR="Red"]Need a Home Launcher installed before removing[/COLOR])
IlsVzW.apk
LMIRescueSecurity.apk
LocalWipePolicyManager.apk
MotoCare.apk
MotoCareInt.apk
MotoDockHelperService.apk
MotoEmail.apk
NotificationTutorial.apk
QuickView.apk (Homescreen notification badge handler)
Setup.apk
SetupWizard.apk
SmartActionFW.apk
SmartActionMFW.apk
SmartActions.apk
SmartCarDock.apk
SmartDock.apk
VerizonSSOEngine.apk (Needed for MyVerizon data widget)
Vvm.apk
VzwCbsLoader.apk
VzwController.apk
VzwDeviceSetup.apk
VzwEntitlementService.apk
VZWPackageInstaller.apk
vzwPhoneExt.apk
VzwPhoneService.apk
VzwSecureSettings.apk
VzwSettingsExt.apk
Weather.apk (Needed by CircleWidget3D)
WapPushSI.apk
----------------------------------------------------------------------------------
MOTOROLA FIRMWARE LINKS
----------------------------------------------------------------------------------
> http://www.drdevs.com/devs/FXZ-files/
> http://drdevs.com/devs/FXZ-files/XT907 (Droid RAZR M)/
> http://motofirmware.center/files/category/24-scorpionmini-all-variants/
----------------------------------------------------------------------------------
EFS BACK-UP & RESTORE - USE THIS NOW!
----------------------------------------------------------------------------------
- Thanks to @rahimali > http://goo.gl/IJuE9v
> Advanced backup and restore utility of your device's sensitive partition and NV data. - Created by lyriquidperfection
FEATURES:
Automatic detection and termination of SAMSUNG Kies application and ADB server instances on startup.
Backup and restore partition images to and from compressed archives (*.tar.gz format).
Detects backup archives automatically on the device and PC for hassle free restoring.
Device Filter support to help users identify which partitions are the important ones to backup.
Extract and read device's PIT file to ensure efficient and accurate backup and restore operations (Samsung devices only).
Check MD5 hash during backup and restore operations to verify integrity of data written.
Option to Format EFS to wipe all data and recreate partition.
Options to reset Battery Cable, SPen and Earphone Jack counters on supported Samsung devices.
Option to fix Samsung devices that are 'stuck' in Factory Mode with the on screen overlay.
Option to fix Samsung devices that have Lock Screen issues and missing Power Button Menu.
A full featured AT and QCDM Terminal for sending custom commands and/or bytes to the connected device.
Qualcomm device support allowing many new features such as backup and restore of the FULL NV Item range.
Generate ESN / MEID / IMEI in reversed HEX format for Qualcomm repair operations.
Read and write ESN / MEID / IMEI to and from Qualcomm devices and QPST 'QCN Backup' files.
Send Diagnostic Password (16 Digits Hex) to unlock secure operations.
Read / write / send SPC (Service Programming Code) on Qualcomm devices.
Read / write Lock Code on Qualcomm devices.
Skip NV items during backup based on a defined profile list to enable FULL backups.
Ability to backup a custom NV item range based on a user defined list.
Automatic detection and switching of USB settings when launching Qualcomm NV Tools.
Option to display various device, ROM and BusyBox related information at the click of a button.
Option to restore NV data from internal '*.bak' files if they exist to fix corrupt or incorrect IMEI number.
Option to repair NV data file ownership to fix 'Unknown baseband' and 'No signal' issues.
Supports backup and restore of 'fsg', 'fsc', 'backup' and other partitions that do not have a corresponding filename defined in the PIT file.
Enable / Disable 'HiddenMenu' on newer devices.
Launch PhoneUtil, UltraCfg and other built in hidden device menus straight from the application UI.
THREAD / DOWNLOAD:
> http://forum.xda-developers.com/gal...ol-updated-09-06-14-efs-professional-t1308546
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
GUIDES
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
----------------------------------------------------------------------------------
1a. ROOT - Locked Bootloaders
----------------------------------------------------------------------------------
-------------------------------------------------------------
HYDROGEN PEROXIDE ROOT:
-------------------------------------------------------------
For locked bootloaders with a kernel build date after June 3, 2014
Code:
[B][I]Settings > About phone > Kernel version[/I][/B]
Created by HydrogenXS & SERG_GANGUBAS
Based on Giefroot by zxz0O0 / Team Keen
Video Tutorial and Instructions by @sd_shadow > http://forum.xda-developers.com/droid-razr-m/general/root-droid-razr-m-xt907-183-46-15-t3137351
EXPLOIT SOURCES > http://forum.xda-developers.com/showpost.php?p=58916587&postcount=
ROOT THREAD > http://forum.xda-developers.com/droid-razr-m/general/root-droid-razr-m-xt907-183-46-15-t3137351 - sd_shadow's root thread.
-------------------------------------------------------------
TOWEL ROOT:
-------------------------------------------------------------
For locked bootloaders with a kernel build date before June 3, 2014
Code:
[B][I]Settings > About phone > Kernel version[/I][/B]
Download Towel Root [XDA] [WEBSITE]
Place on external SDcard
Install and run Towel Root
Follow any in-app prompts
Reboot
PROFIT!
----------------------------------------------------------------------------------
1b. ROOT - Unlocked Bootloaders
----------------------------------------------------------------------------------
Download and install a custom recovery (Instructions listed below - #3)
Download a Superuser flashable zip [SuperSU] [CWM Superuser]
Place on external SDcard
Enter Recovery
Flash Superuser.zip
Reboot
PROFIT!
----------------------------------------------------------------------------------
2. BOOTLOADER UNLOCKING
----------------------------------------------------------------------------------
KITKAT 182/183.46.10 FIRMWARE ONLY.
WILL NOT WORK ON THE 182/183.46.15 RAZR M FIRMWARE OR THE MOTO LUGE.
> Unlockable Firmware - forum.xda-developers.com/showpost.php?p=57339009&postcount=2
--------------------------------------------
APK
--------------------------------------------
Download Towel Root [XDA] [WEBSITE] - Disregard if you have previously rooted using Towel Root
Download Motopocalypse [WEBSITE] [DOWNLOAD]
Place both on external SDcard
Install and run Towel Root
Follow any in-app prompts
Reboot
Install and run Motopocalypse
Follow any in-app prompts
Reboot
PROFIT!
--------------------------------------------
DESKTOP / PC
--------------------------------------------
Head to djrbliss' (Dan Rosenburg) website to read the instructions and download.
> http://vulnfactory.org/blog/2013/04/08/motorola-bootloader-unlocking/
If successful, you will see the Unlocked Bootloader Warning when you reboot your device
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After unlocking your bootloader, you may want to remove the "Unlocked BootLoader Warning" screen (Image above).
You can do this by flashing a boot logo. Head to the link below to choose and flash either the stock or a custom boot logo.
Custom Boot Logos > http://forum.xda-developers.com/droid-razr-m/themes-apps/themes-custom-boot-logos-t2824690
----------------------------------------------------------------------------------
3. CUSTOM RECOVERY
----------------------------------------------------------------------------------
MUST HAVE A UNLOCKED BOOTLOADER
Custom recoveries built and provided by dhacker29 & nobe1976
Download your choice of custom recovery, then proceed to installation.
[TWRP - XDA] [TWRP - DHACKER29][TWRP - DROIDRZR] [CWM - XDA]
[DOWNLOAD (MIRROR)]
XT907 KitKat compatible recoveries
TWRP
Code:
- TWRP - 2.7.1.0.img
- TWRP - 2.8.0.0.img
- TWRP - 2.8.1.0.img
- TWRP - 2.8.2.0.img
- TWRP - 2.8.3.0.img
CWM
Code:
- CWM - 6.0.4.9.img
-------------------------------------------------------------------------------------
INSTALLATION
-------------------------------------------------------------------------------------
-------------------------------
OPTION 1
-------------------------------
MUST HAVE A UNLOCKED BOOTLOADER
Download Mfastboot [MIRROR] - Refer to Mfastboot setup
Place recovery.img into mfastboot folder
Open CMD and [TYPE]
Replace >recovery-name< with the name of the recovery you downloaded. You my re-name the recovery.img to whatever you prefer. I re-named it to TWRPKK.img
Code:
mfastboot flash recovery [COLOR="Red"]>recovery-name<[/COLOR].img
Tap [ENTER]
When finished [TYPE]
Code:
mfastboot reboot
When you tap [ENTER] press and hold Volume Up (+) on your device until the phone boots into recovery to verify installation was successful
DONE!
-------------------------------
OPTION 2
-------------------------------
MUST HAVE A UNLOCKED BOOTLOADER
MUST HAVE ROOT
Download recovery
Place on external SD card
Download and install [Flashify] or [Rashr]
Follow in-app prompts
PROFIT!
----------------------------------------------------------------------------------
RECOVERY NOT WORKING?
----------------------------------------------------------------------------------
MUST HAVE ROOT
If the custom recovery isn't sticking, you will need to re-name recovery-from-boot.p
-------------------------------
OPTION 1
-------------------------------
Using a root explorer navigate to
Code:
/system/recovery-from-boot.p
Rename it to
Code:
recovery-from-boot.p[COLOR="RoyalBlue"].bak[/COLOR]
Reboot
Re-flash custom recovery
PROFIT!
-------------------------------
OPTION 2
-------------------------------
Manually in adb shell or Terminal Emulator
Open command prompt and [TYPE]
Code:
su
Tap [ENTER] then [TYPE]
Code:
mv /system/recovery-from-boot.p /system/recovery-from-boot.p.bak
Reboot
Re-flash custom recovery
PROFIT!
----------------------------------------------------------------------------------
4. RESTORING / UPGRADING STOCK FIRMWARE
----------------------------------------------------------------------------------
If you are having difficulties with RSD Lite, Please try one of these two programs.
Both are alternatives to RSD Lite.
House of Moto
http://www.droidrzr.com/index.php/topic/28162-house-of-moto-32/
RSD Flasher
http://www.droidrzr.com/index.php/topic/48904-rsd-flasher-beta-windows-only/
> If upgrading - be sure to flash the KDA20.62-10.1 firmware, so you could unlock your bootloader.
-------------------------------
OPTION 1
-------------------------------
Restoring/Upgrading with RSD Lite
Download current or updated firmware
[Moto Firmware Link #1]
[Moto Firmware Link #2]
[Alternative Download (4.4.2 KDA20.62-10.1)] - Thanks to @rahimali
Download RSD Lite [MIRROR] [GOOGLE]
Install and run RSD Lite
Boot Device into AP Fastboot - Refer to Booting Options
Connect your device via OEM USB cable in a USB 2.0 port
Select the [3 dot button] [...]
Navigate and select the downloaded firmware zip and click [OPEN].
Select [Decompress And Start Flashing].
When finished, reboot.
DONE!
-------------------------------
OPTION 2
-------------------------------
DO NOT UPGRADE WITH MFASTBOOT
Restoring with Mfastboot
Download current firmware [DOWNLOAD]
Download Mfastboot [MIRROR] - Refer to Mfastboot setup
Open the zip and extract these files to your Mfastboot folder
Code:
NON-HLOS.bin
system.img
boot.img
recovery.img [COLOR="Red"](OPTIONAL)[/COLOR]
Boot your device into AP Fastboot - Refer to Boot Options
Connect your device with the OEM USB cable in a USB 2.0 port
Open CMD and [TYPE]
Code:
mfastboot flash modem NON-HLOS.bin
Tap [ENTER]
When finished [TYPE]
Code:
mfastboot erase modemst1
Tap [ENTER]
When finished [TYPE]
Code:
mfastboot erase modemst2
Tap [ENTER]
When finished [TYPE]
Code:
mfastboot flash system system.img
Tap [ENTER]
When finished [TYPE]
Code:
mfastboot flash boot boot.img
Tap [ENTER]
When finished [TYPE] (OPTIONAL)
Code:
mfastboot flash recovery recovery.img
Tap [ENTER]
When finished [TYPE]
Code:
fastboot erase cache
Tap [ENTER]
When finished [TYPE] (OPTIONAL)
Code:
fastboot erase userdata
Tap [ENTER]
When finished [TYPE]
Code:
mfastboot reboot
Tap [ENTER]
PROFIT!
----------------------------------------------------------------------------------
5. DEODEXING
----------------------------------------------------------------------------------
MUST HAVE A UNLOCKED BOOTLOADER
MUST HAVE CUSTOM RECOVERY
Deodexing is basically repackaging of these APKs in a certain way, such that they are reassembled into classes.dex files. By doing that, all pieces of an application package are put together back in one place, thus eliminating the worry of a modified APK conflicting with some separate odexed parts.
So, Deodexed ROMs (or APKs) have all their application packages put back together in one place, allowing for easy modification such as theming. Since no pieces of code are coming from any external location, custom ROMs or APKs are always deodexed to ensure integrity. - R_a_z_v_a_n
--------------------------------------------------
DOWNLOAD - KitKat_Deodexer
--------------------------------------------------
Extract the contents of the Kitkat_Deodexer.rar to your PC
Plug in your device
Ensure that USB debugging is enabled
Code:
Settings > Developer options > USB debugging
Dont see developer options?
Code:
Settings > About phone > Tap "Build number" 7 times
Run main.bat
[TYPE 1] and tap [ENTER] - to create a working directory
[TYPE 2] and tap [ENTER] - to pull the System files for deodexing
When finished, [TYPE 3] and tap [ENTER] - to start deodexing
When finished, [TYPE 4] and tap [ENTER] - to create a flashable zip
Move [deodex_install.zip] to your external SD card
Unplug your device
Enter Recovery
Flash [deodex_install.zip]
Reboot
PROFIT!
----------------------------------------------------------------------------------
6. VZW HOTSPOT / WIRELESS TETHER HACK
----------------------------------------------------------------------------------
MUST HAVE ROOT
Thanks to Topsnake for the Mod [THREAD]
-----------------------------
STEP 1
-----------------------------
Using any [ROOT EXPLORER]
Navigate to
Code:
/ system / priv-app
Look for and delete (or rename)
Code:
VzwEntitlementService.apk
VZWEntitlementService.odex
Continue to step 2
-----------------------------
STEP 2
-----------------------------
Using a Root Explorer or Build.Prop editor
Navigate to
Code:
/ system / Build.Prop
Open in text editor and add to the bottom
Code:
ro.mot.tether_dun_required=0
ro.tether.denied=false
net.tethering.noprovisioning=true
Save and close
Reboot
PROFIT!
----------------------------------------------------------------------------------
7. DISABLING THE OTA POP-UP
----------------------------------------------------------------------------------
MUST HAVE ROOT
Using any [ROOT EXPLORER]
Navigate to
Code:
/ system / priv-app
Delete or rename
Code:
3c_ota.apk
Reboot
PROFIT!
----------------------------------------------------------------------------------
8. STUCK IN AP FASTBOOT
----------------------------------------------------------------------------------
Motorola uses the command fb_mode_set to insure that your device will reboot into AP fastboot to avoid any problems while flashing firmware.
To clear this we need to do the following:
While in AP fastboot, connect your device to your PC
Open mfastboot then [TYPE]
Code:
fastboot oem fb_mode_clear
Tap [ENTER]
When finished [TYPE]
Code:
mfastboot reboot
Tap [ENTER]
PROFIT!
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
LINKS
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
[INDEX] Motorola Droid Razr M (2015)
[HELP THREAD][Motorola Droid Razr M] Ask ANY Question. Noob Friendly
Motorola Official Change Log
[How-To][Tutorial] Downgrade Kit Kat 4.4.2 to JB 4.1.2
[KK] Add external SD Card writing for all apps
[DUMP][DEV][xt907] 4.4.2 OTA Partition Dump
[WORKAROUND] Access hidden settings menus
[MOD][4.4.2] Native Tether Exploit for XT907 Build 183.46.10/ Build 182.46.10
[HowTo] [VZW XT907/926 RAZR M/HD] Unlock US GSM Carriers Using RadioComm
[THEMES] Custom Boot Logos
[INDEX] Motorola USB Drivers, RSD Lite, Firmware Links & More
Universal ADB Drivers
--------------------------------------------------------------------------------------------------------------------------------------------
Did I miss something? Do you want me to add something? Let me know so I can add it to the guide/FAQ.
[*]This thread has been designed to be viewed on a Desktop and in XDA's 2015 layout. (looks terrible in Tapatalk)
[*]Being a Recognized Themer here at XDA, I have a ad-free template. So the thread layout may look different to me then for you. So, if you need me to adjust something, please let me know.
Finally an up to date, very well written, easy to follow guide.... Thank you kindly for putting this together ATTACK
We cannot teach people anything; we can only help them discover it within themselves.
Guys i can't see my backuped stoch kitkat rom in phome memory i am using cwm that you recommended in your post pls help. Backup is saved somewhere more than 1gb is unavailable after backup pls help.
Sent from my XT907 using XDA Free mobile app
taimur272 said:
Guys i can't see my backuped stoch kitkat rom in phome memory i am using cwm that you recommended in your post pls help. Backup is saved somewhere more than 1gb is unavailable after backup pls help.
Sent from my XT907 using XDA Free mobile app
Click to expand...
Click to collapse
Code:
/sdcard/ClockworkMod/Backup
OR
Code:
/mnt/shell/emulated/0/ClockworkMod/Backup
OR
Code:
/storage/emulated/0/ClockworkMod/Backup
Can i change that directory ! Can someone tell me a best kernel for stock kitkat rom and also doeas anyone phpne gets heatup while on 3g umts.
Sent from my XT907 using XDA Free mobile app
taimur272 said:
Can i change that directory ! Can someone tell me a best kernel for stock kitkat rom and also doeas anyone phpne gets heatup while on 3g umts.
Sent from my XT907 using XDA Free mobile app
Click to expand...
Click to collapse
I use TWRP, so I have no idea if you can change the directory in CWM. I think there maybe a option to backup to sdcard1 or something like that, but again I don't use CWM.
There are no kernels for Stock firmware unless you downgrade and use CM11_jbbl ROM. The heat issue has been reported multiple times, I dont have any heat issues but others do. You could try and disable FastDormancy.apk/odex. I read that it helps, but IDK.
My phone heated up with too many radios running at once service locations was the main beast but disabling allot of its permissions fixed that I have also noticed high battery loss when my phone is searching between 3g/4g ect which also penalty meant heat....
Sent from my XT907 using XDA Free mobile app
My phones heatups when i use 3g(signal 2 bars) on my phone and facebook simultaneously....... Can it be cpu that's heating up.... Can you tell me a good app to control cpu frequency and which supports dual core
Sent from my XT907 using XDA Free mobile app
---------- Post added at 09:37 PM ---------- Previous post was at 09:35 PM ----------
I also chanhed my stock kernel with recompiled kernel found in speaker popping thread it fixed my sound issue and also sleep issue
Sent from my XT907 using XDA Free mobile app
Can i update my device from the ota update
My device is unlucked but I decided to unroot my device
Any suggestions?
Sent from my XT907
What exactly is included in the update? Are there any features I will miss out on by not updating?
Sent from my XT907 using XDA Free mobile app
immadeofpixels27 said:
What exactly is included in the update? Are there any features I will miss out on by not updating?
Sent from my XT907 using XDA Free mobile app
Click to expand...
Click to collapse
No "new" features.
I'm still waiting on there official changelog, but what I do know is that they patched FakeID, Futex & TrustZone. Also SMS/MMS fixes.
Motorola official changelog > https://motorola-global-portal.custhelp.com/app/answers/prod_detail/a_id/87530/p/30,6720,8577
Rooted xt907, verizon pushing update
Hello,
I used the TowelRoot method on my XT907 a couple of months ago. Just wanted to get bloatware off, and add a couple of battery life apps.
It was successful, and I have enjoyed being rooted so far. However, saturday verizon tried to push an update, and I have rejected it the last couple of days. As i am unsure if i'm safe to accept this update. Also, since they have pushed this crap at me, my phone has been doing very weird things. It was completely fine before this. Now it blacks out randomly, and comes right back.
Anyhow, the question is should i unroot before accepting this update?
Thanks for any help, and sorry if i've posted in the wrong board.
centelred said:
Hello,
I used the TowelRoot method on my XT907 a couple of months ago. Just wanted to get bloatware off, and add a couple of battery life apps.
It was successful, and I have enjoyed being rooted so far. However, saturday verizon tried to push an update, and I have rejected it the last couple of days. As i am unsure if i'm safe to accept this update. Also, since they have pushed this crap at me, my phone has been doing very weird things. It was completely fine before this. Now it blacks out randomly, and comes right back.
Anyhow, the question is should i unroot before accepting this update?
Thanks for any help, and sorry if i've posted in the wrong board.
Click to expand...
Click to collapse
Unlock your boot loader before doing anything else ... If you have debloated you will probably have to use rsd to either flash directly to the update or to .10 then ota up to the update... But be sure to unlock your boot loader or it will be locked for good and there is not a way to root the update yet with out an unlocked boot loader...BTW mine has been doing this black out thing you describe after rejecting and deleting the update...
We cannot teach people anything; we can only help them discover it within themselves.
centelred said:
Hello,
I used the TowelRoot method on my XT907 a couple of months ago. Just wanted to get bloatware off, and add a couple of battery life apps.
It was successful, and I have enjoyed being rooted so far. However, saturday verizon tried to push an update, and I have rejected it the last couple of days. As i am unsure if i'm safe to accept this update. Also, since they have pushed this crap at me, my phone has been doing very weird things. It was completely fine before this. Now it blacks out randomly, and comes right back.
Anyhow, the question is should i unroot before accepting this update?
Thanks for any help, and sorry if i've posted in the wrong board.
Click to expand...
Click to collapse
Did you unlock your bootloader? If not I suggest you do so now before taking any update. If you update to 183.46.15 and do not have a unlocked bootloader you will NOT be able to root.
In order to update, you'll need to have a stock system (unaltered) and recovery. I would suggest you follow #4 option 2 to restore.
Or alternatively you could delete or rename this app to disable the OTA pop-up nag screen.
Code:
/ system / priv-app / [COLOR="Red"]3c_ota.apk[/COLOR]
Thanks for your help guys!! I'm not sure if i've unlocked the bootloader, but i'll do the research on how to do that. I just didn't want to accept the update, if it was going to cause further problems.
Hi!
Attack, I just want to say, absolutely fantastic and thorough thread! Covered anything and everything!
I just have one problem...towelroot says my phone is not supported!
xt907 running version 182.46.15. TR worked flawlessly on my razr HD, and since no one else had problems with it, I don't understand why I'm receiving this error! Any ideas? Thanks
xChowderrrx said:
Hi!
Attack, I just want to say, absolutely fantastic and thorough thread! Covered anything and everything!
I just have one problem...towelroot says my phone is not supported!
xt907 running version 182.46.15. TR worked flawlessly on my razr HD, and since no one else had problems with it, I don't understand why I'm receiving this error! Any ideas? Thanks
Click to expand...
Click to collapse
Moto patched the FakeID, Futex & TrustZone exploits on the .15 OTA. So unless your bootloader is unlocked, your stuck without root.
So I could use the FXZ and update to 183.46.10 and it should work?
xChowderrrx said:
So I could use the FXZ and update to 183.46.10 and it should work?
Click to expand...
Click to collapse
Is your bootloader unlocked?
ATTACK said:
Is your bootloader unlocked?
Click to expand...
Click to collapse
No sir, I can't unlock until I root, correct? And Samurai's FXZ is for locked or unlocked razr M's. I could root and unlock once I get to that version (through RSD or HouseOfMoto), right?
Related
This is my first work on xda, I created a tool that can make lots of thing with just a click !
Download Links
Linux
Windows
WARNING!!!
I'm not responsible if you brick your device!!! Do at your own risk!!!
Bootloader Unlocker and Root Tool will VOIDS YOUR WARRANTY!!!
Click to expand...
Click to collapse
Feel free to buy me a coffee, it will be appreciated , click the donate button over there (coffee) http://forum.xda-developers.com/donatetome.php?u=4169130
XDA portal link
Here it is : http://www.xda-developers.com/android/all-in-one-tool-for-motorola-xoom-brings-dual-recovery/
Thanks for the help
How to use
Windows --> Download the ZIP from here: http://sourceforge.net/projects/laiot/files/LAIOT.zip/download. Extract it in any folder you want. Then read the README_FIRST.txt file, it contains further information about what you need to do! Here's the content if you prefer reading in your browser:
PLEASE RUN (as administrator) The "Set_Up.bat" First To make sure all dll's and files are distributed where they need to be in order to launch LAIOTools
The reason for this is because this utility does not require the Android SDK to run and has "several key files" that need to be added to multiple directories within LAIOTools for certain Utilities, commands, and features to work properly! This was setup like this to avoid having to manually copy and past the files as well as to keep the download of this utility as light as possible...
Once Set_Up.bat has completed you will see LordAIOTool.bat in the LAIOT root directory. To use the utility, just double click the LordAIOTools.bat to begin...
(Note: There is a version 2 of the same file slightly modified, that file is mainly the same with a slight difference, it does not check to make sure necessary files are installed in the Tools directory for use with this utility - so please do not start with the LordAIOTool2.bat file. It's purpose is used throughout the utility for navigation purposes as a way to bypass the initial file check in the main LordAIOTool.bat file to keep things moving once you have launched the utility.) ..no harm should come if you accidentally used the 2.bat just that some commands may fail while trying to use it!
If you need to install the Motorola Device drivers install the appropriate windows version 32 bit or 64 bit depending on your system, they are located in the folder labeled Moto_Drivers
Click to expand...
Click to collapse
Linux --> Extract on your ~/ (If you didn't understand - /home/youruserhere), open LAIOT folder, double click "RunThisOnce.sh" select run in terminal, now it's installed, to run it, open a terminal and write LAIOT, it's opened! Please report here the bugs! The Linux version link is here https://downloads.sourceforge.net/project/laiot/LAIOT.tar.gz?r=&ts=1335123218&use_mirror=master , everything from Windows version is included except Boot in Ubuntu, but I will add later, sorry for the long wait for the new update, but it's here!
Click to expand...
Click to collapse
Features
1.Complete Backup Tool
2.Bootloader Unlocker Tool
3.Bootloader Locker Tool
4.Install Recovery
5.Restore Tool
6.Root Tool
7.Unroot Tool
8.App Install
9.Unbrick Xoom Tool
10.Dual Recovery Tool (Only on Linux version)
11.Ubuntu Boot (Based here Thank him as well!!!)
12.ROM Install (Under Development)
13.Stock Install
Click to expand...
Click to collapse
To use Unroot Tool on Xoom and Unbrick Xoom Tool download the official image (for your device) from the following link :
http://developer.motorola.com/products/software/
Click to expand...
Click to collapse
History/Changelog
1st posted as a tool that can backup /sdcard/Android and /sdcard/Gameloft folders on Motorola Xoom, then added Bootloader Unlocker and Root, then added more features
Beta 1
First Release
No script yet
Beta 2
Added a script on zip that can backup your data and unlock bootloader
Fixed Bootloader Unlocker Tool Bug and added some new options
Beta 3
Added root option
Fixed some more bugs
Put some more things and better writing
Beta 4
Added option to Lock Bootloader
Fixed some words wrong
Tried to fix some bugs
Beta 5
Added App Install feature
Added Check Root Feature
Fixed some gramatic errors
Fixed some bugs in Bootloader Unlocker
Fixed some bugs in Root
Fixed some bugs on Lock Bootloader
Beta 6
Renamed to Lord AIO Tool (on Script)
Added new Root option (Super One Click for some devices)
Added DooMLoRD root (For Xperia 2011 devices)
Fixed "Install app" bug
Fixed "Restore folders" bug
Added more compatibility
Fixed more bugs
Arranged better the folder
Beta 7
Added User Data Backup
Improved Backup Tool
Improved Restore Tool
Created an User Data Restore Tool
Moved to Development section
Beta 7.1
Just fixed some minor errors... Sorry didn't notice them
Beta 8
Added Unroot option
Fixed some other minor errors that I didn't notice
Beta 9
Added Unbrick Xoom Feature (Testers needed)
Organized better the folder of the tool (sorry still need to extract on C:/)
Beta 10
Added to X10 Mini Pro forum
Added X10 Mini/Pro and X8 Bootloader Unlocker
Beta 11
Added Dual Recovery Xoom (still developing, not working for now ) (Maybe until Wednesday it's done )
Added X10 Mini/Pro CWM Install
Fixed some problems when trying to use some tools
Beta 11.1
Testing phase of Dual Recovery on Xoom!!!
Reuploaded, must work now
Fixed some minor things...
Beta 12
Fixed some bugs
Really added CWM Install option (working fine)
Messed up with dual recovery... NOT WORKING FOR NOW! DO NOT TRY USING IT!!!
Beta 13
Added Ubuntu Boot
Fixed some things...
Added VNC Install
Added Ubuntu Download
Version 1
Linux Version is out!
Dual-Recovery on Linux version!
Started ROM Install development!
Stock Install on Linux version!
Version 2
Fixed little bug on Dual-Recovery.sh and LordAIOTool.sh scripts
Added BacktrackInstall/Uninstall/Boot script
Started new project... First two scripts are on update, now back to work
Version 2.1
Big Windows Update!
No changes in Linux yet, next version may come with Linux update
Code completely rewritten
Tools description clearer
Better Start-up check
Many thanks to @sidgrafix, my dear friend, who made this Windows update possible.
Click to expand...
Click to collapse
Warning regarding last update!
There are some untested features! Also there are some tools missing! A FAQ was added to the code, and it will be created with users information!
Thanks.
My Special Thanks to:
BPaul (paul-xxx) ---> He was my inspiration since I started thinking about developing... He is my favorite developer ever!
zone23 ---> For helping me when I needed some help
solarnz ---> For making the CWM and root I used here for Xoom
DoomLoRD --->For making the root option I used here for Xperia 2011 devices
shortfuse --->For creating the SuperOneClick I used here too
unrandomsam --->For giving me the idea to backup userdata
My Dad --->For helping me in fixing some problems
unchainedrssr --->For giving Dual Recovery tip
D4 --->For porting CWM to x10 mini pro
tehgeekguy --->For giving me some files
zacthespack --->For modding ubuntu.img to Xoom and creating the ubuntu.sh
faiyyaz --->For fixing a little thing on Ubuntu Script
Backtrack --->For making this amazing Distro and arm compatible!
sidgrafix ---> For rewriting the whole Windows script
undergroundandroid ---> For giving support to my projects
Click to expand...
Click to collapse
Thanks for choosing Lord AIO Tool!!!
Manual Root Way
STEP 1: Obtaining Required Files
a.) Download the latest version LAIOT for Windows (http://forum.xda-developers.com/showthread.php?t=1468298)
b.) Download and Install the latest version of Motorola USB Drivers from HERE.
http://www.motorola.com/Support/US-...tware_and_Drivers/USB-and-PC-Charging-Drivers
c. Download http://dl.atftas.us/OEM/Motorola/XOOM/Xoom-Universal-Root.zip2.
STEP 2. Connect the Xoom, Install SD Card, and setup PC
Make sure your Xoom is turned on. Go to settings and click on [developer options]; turn USB debugging ON; turn stay awake ON
Connect it to your PC via USB.
Make sure you have the Xoom drivers installed and that the Xoom mounts on the computer
Place the following files on the root of your SD Card:
Xoom-Universal-Root.zip (downloaded earlier)
Update.zip (from LAIOT Tools Folder)
Install the LAIOT tools folder on c:/LAIOT
Run the LordAIOTool.bat file
STEP 3: Unlock the Bootloader
Copy update.zip from tools folder and Xoom-Universal-Root.zip to external sdcard
Open cmd window on your PC and type the following commands:
cd C:/
cd LAIOT
cd LAIOT
cd CWMInstall
adb reboot bootloader
Your XOOM will reboot into the bootloader (fastboot mode) showing "Starting Fastboot Support Protocol".
Type the following command into the Command Prompt to unlock your bootloader:
fastboot oem unlock
Read the warning and follow the instructions on the Xoom Tablet itself from this point onwards. On the tablet, accept the terms using [VOL -] and [VOL +] keys
[VOL -] then [VOL +] to select
repeat [VOL -] then [VOL +] to select
Once selected, your Xoom will now unlock and format itself, meaning, all data will be cleared and you will go back to a factory reset. and will reboot on its own bringing you to the setup wizard (skip it). (You do want to let it complete the full reboot process this time)
STEP 4: INSTALL ClockworkMod Recovery (CWM)
Make sure you have the SD card installed in the Tablet.
Bring your Xoom back to the fastboot screen by:
hold [POWER] + [VOL +] until it reboots
Place in Fastboot Mode: During the first 2 seconds after the Dual Core screen appears, press [VOL +]
On the computer, type:
fastboot flash recovery CWMTiamat.img
You will get a confirmation message indicating that the flashing is done on both computer and Xoom. Then:
fastboot reboot
Do not let it boot to completion (normal boot) or you will need to repeat this process.
Now on Xoom, apply update.zip and Xoom-Universal-Root.zip from SD Card:
While booting press [VOL -] 3 sec after Motorola Dual-Core screen appears (Android Recovery Screen should appear)
Then press [VOL +] (CWM screen should appear now)
use the [VOL -] & [VOL +] keys to navigate and [POWER]button to select
Select "Apply sdcard update.zip" and then
- select “choose zip from sdcard”
-select “Xoom-Universal-Root.zip”
- Select "Yes"
Select “Install zip from sdcard”
Now Select “+++++Go Back+++++” and then “Reboot system now”
Note: if you are restoring from a rooted image, you should be able to skip these last two installs (update.zip and Xoom-Universal-Root.zip) and go straight to the restore procedure (step 6)
You should be done, but you now need to confirm your root status by:
Download and install “Root Checker Basic” from Google Play and then run the checker. You should get a prompt to “allow superuser”. Click “Allow” and you should get a confirmation that you have root access.
You are complete and now have a rooted Xoom with Nandroid ClockWords Mod installed
STEP 5: Backup image to SD card
Make sure you have the SD card installed in the Tablet.
On your Xoom:
Hold [POWER] + [VOL +] until it reboots
While booting press [VOL -] 3 sec after Motorola Dual-Core screen appears (Android Recovery Screen should appear)
Then press [VOL +] (CWM screen should appear now)
use the [VOL -] & [VOL +] keys to navigate and [POWER]button to select
Select "backup and restore" and then
- select “backup”
-select “Xoom-Universal-Root.zip”
- Select "Yes" and wait while it completes your backup
Now Select “+++++Go Back+++++” and then “Reboot system now”
STEP 6: Restore image from SD card
Make sure you have the SD card with your backup installed in the Tablet.
On your Xoom:
Hold [POWER] + [VOL +] until it reboots
While booting press [VOL -] 3 sec after Motorola Dual-Core screen appears (Android Recovery Screen should appear)
Then press [VOL +] (CWM screen should appear now)
use the [VOL -] & [VOL +] keys to navigate and [POWER]button to select
Select "backup and restore" and then
- select “restore”
-select your desired backup
- Select "Yes" and wait while it completes your restore
Now Select “Reboot system now”
I'm thinking about changing the name, does anyone know another name?
XxLordxX said:
I'm thinking about changing the name, does anyone know another name?
Click to expand...
Click to collapse
You could just call it Xoom Back-up, Unlock & Root (if a root tool is added).
I think that it's great that young people like you are doing work like this. Good luck!
Cool name
Sent from my MZ605 using XDA App
Is this script applicable for Xoom Wifi US model?
is there unroot option?
Hi, I think it is applicable on Wifi US, as it features doesn't have any thing that prevent you... I liked your unroot a good idea , will put on it on next release, the unique problem of the unroot is that it isn't universal, I'm using Tiamat Universal root, so I don't face this incompanility problem there...
Sent from my MZ605 using XDA App
Don't get how this is a full backup.
What about the stuff in userdata ?
(All the script does is adb pull /sdcard/)
Reading everything like that seems unlikely and if it did include everything don't get how the permissions would work. (For the stuff usually in userdata on phones.)
Or does userdata on honeycomb not matter with regards to either permissions or file ownership ?
---------- Post added at 09:47 PM ---------- Previous post was at 09:34 PM ----------
XxLordxX said:
Hi, I think it is applicable on Wifi US, as it features doesn't have any thing that prevent you... I liked your unroot a good idea , will put on it on next release, the unique problem of the unroot is that it isn't universal, I'm using Tiamat Universal root, so I don't face this incompanility problem there...
Sent from my MZ605 using XDA App
Click to expand...
Click to collapse
There is no reason you couldn't do the process in reverse (Splitting the boot.img - doing the opposite to build.prop reflash)
Wouldn't be signed though.
Does the original stay signed if it is backed up with dump_image ?
I didn't put backup for anyother than /sdcard/ because to backup anyother you need root... and I think I maybe add in beta 7 this option... BTW the new thread is on Android Hacking General you can find the link on the start of the post...
Sent from my MZ605 using XDA App
---------- Post added at 09:47 PM ---------- Previous post was at 09:34 PM ----------
[/COLOR]
There is no reason you couldn't do the process in reverse (Splitting the boot.img - doing the opposite to build.prop reflash)
Wouldn't be signed though.
Does the original stay signed if it is backed up with dump_image ?[/QUOTE]
I don't think so, to restore the unroot (as I know) you need a CWM backup before the install of update.zip and/or the official image (including the system)
Sent from my MZ605 using XDA App
Bump
10 chars
Beta 9 coming!!! Now with Unbrick feature!!!
Sent from my MZ605 using XDA App
Beta 9 is up and with Unbrick feature!
Keep up the good work nick!
And also, hope you make this tool works perfectly on our x10mp too.
Or, make it for all devices! FTW!
Goodluck!
leimrey said:
Keep up the good work nick!
And also, hope you make this tool works perfectly on our x10mp too.
Or, make it for all devices! FTW!
Goodluck!
Click to expand...
Click to collapse
Thanks , I'm working on x10 mini pro, but if you knows anyone can help me on testing please ask him/her to help too ... I only have x10 mini pro and xoom, my brother has a Play, but he don't let me test as it will void him warranty
For user mjamocha66 I wasn't able to send you an email and a PM so the answer is here, after unpacking just double click LordAIOTool.bat on LAIOT folder, no more thing is needed
BUMP, thinking about a new feature, someone can help?
Sent from my MZ605 using XDA App
Repart (BlackRose type) Bootloader. Might as well get started on it because it will come to be needed.
Recovery Switch/Flash Script. There will be alternate recoveries that will all have their pros and cons (stability vs. WIP). Likely to be various stages of touch recoveries with multiple beta testing stages for themes, tools, etc. They may not prove to be trustworthy at first but we will all test them anyway.
Since ADB can now be used over wifi, you can look into adding this functionality as well (wireless).
These are just off the top of my head. My friends and wife know I can do this all day. I'll check in on occasion to see how this tool develops.
Keep up the good work.
Ok thanks for the tip
Sent from my MZ605 using XDA App
Beta 10 is coming, with x10 mini pro Unlock Bootloader Unlocker
[TOOLKIT] UNIFIED ANDROID TOOLKIT - SAMSUNG GALAXY NOTE 2 - Drivers, Root, Recovery + MORE
GSM (GT-N7100) and LTE (GT-N7105) SUPPORTED. THREAD: http://forum.xda-developers.com/showthread.php?t=1923956
AUSTRALIAN GSM (GT-N7100T) and LTE (GT-N7105T) SUPPORTED. USE GSM THREAD
SPRINT (SPH-L900) SUPPORTED. THREAD: http://forum.xda-developers.com/showthread.php?t=1957155
TMOBILE (SGH-T889) SUPPORTED. THREAD: http://forum.xda-developers.com/showthread.php?t=1957720
MOBILICITY, VIDEOTRON, WIND [SGH-T889V] SUPPORTED. NO THREAD YET. USE TMOBILE THREAD
AT&T (SGH-L317) SUPPORTED. THREAD: http://forum.xda-developers.com/showthread.php?t=2052779
BELL, ROGERS, SASKTEL, TELUS [SGH-I317M] SUPPORTED. NO THREAD YET. USE AT&T THREAD
VERIZON ([SCH-I605]) SUPPORTED. THREAD: http://forum.xda-developers.com/showthread.php?t=2052788
US CELLULAR (SCH-R950) SUPPORTED. NO THREAD YET. USE ANY
KOREAN SK TELECOM [SHV-E250S] SUPPORTED. NO THREAD YET. USE ANY
The Unified Android Toolkit brings together all the Nexus and Samsung Toolkits and supports many Nexus and Samsung devices. There is also an option at startup to run a Basic Android Toolkit which any Android device can use to install drivers, make app backups, install apk files, reboot the device into different modes and run a command prompt for manual input.
FUNCTIONS OF UNIFIED ANDROID TOOLKIT
* Install correct adb/fastboot drivers automatically on Windows xp/vista/7/8 32bit+64bit/Windows 10
* Backup/Restore a single package or all apps, user data and Internal Storage
* Backup your data from selectable folders [internal or external storage] to your PC for a Full Safe backup of data
* Unlock/Re-Lock your Bootloader [Nexus]
* Root Stock builds
* Various Root options using insecure boot image or custom recovery
* ALLINONE to Unlock, Root, Rename the Restore Files and install busybox [Nexus]
* ALLINONE to flash custom Recovery Root, Rename the Restore Files and install busybox [Samsung]
* [NEW] use SkipRoot boot image to Auto Root device, install Busybox Binaries and rename Recovery Restore files [selected devices]
* Install BusyBox on your device
* Perform a FULL NANDROID Backup of your system (Boot, Cache, Data, Recovery and System) via adb and save in Custom Recovery format on your PC which can be Restored via CWM Recovery [if insecure boot image available]
* Fix extSdCard write permissions from installed apps in Android 4.4+ [Samsung]
* Pull /data and /system folders, compress to a .tar file and save to your PC [if insecure boot image available]
* Dump selected Device Partitions, compress to a .zip file with md5 and save to your PC [if insecure boot image available]
* Extras, Tips and Tricks section
* Auto Update ToolKit to latest available version at startup (professional only feature)
* Program up to 10 Quickpick slots and run them very quickly (professional only feature)
* Mods section to automatically perform certain tasks on your device
* Download Google Stock Image directly to correct ToolKit folder for extracting and flashing [Nexus]
* Check md5 of stock image to make sure downloaded file isn’t corrupted before flashing [Nexus]
* Download Samsung Stock Firmware to PC for extracting and flashing via Odin [Samsung]
* Flash Custom Recovery or Google Stock Image to Device
* Flash any part of a stock Nexus image to device [boot, system, recovery] – Great for fixing broken parts of firmware
* Rename the Recovery Restore File present on some Stock Roms
* Boot into CWM Touch, TWRP, Philz Touch Recovery or Stock Recovery without Flashing it [Nexus]
* Flash Custom Recovery to Device
* Boot [Nexus] or Flash .img Files directly from your PC
* Install a single apk or multiple apk’s to your device
* Push Files from your PC to your device
* Pull Files from your device to your PC
* Disable forced encryption on Nexus6 and Nexus9 devices
* Install Root Checker app by Burrows Apps
* Install Backup/Restore app by MDroid Apps [calls log, sms, contacts]
* Install EFS/Partition Backup/Restore app by Wanam
* Dump selected LogCat buffers to your PC
* Dump BugReport to your PC
* Set Files Permissions on your device
* Open new Command Prompt for manual input
* Reboot device to Fastboot Mode or Android from fastboot mode [Nexus]
* Reboot device to Fastboot Mode [Nexus], Recovery, Android or Download Mode [Samsung] from adb mode
* Display Important Information about your device
--------------------------------------------------------------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
--------------------------------------------------------------
SUPPORTED DEVICES AND LATEST SUPPORTED BUILDS *HERE*
DOWNLOAD THE SKIPSOFT UNIFIED ANDROID TOOLKIT *HERE* (FROM SKIPSOFT.NET)
NOTE: Key files are signed with a Digital Certificate from skipsoft.net but some ‘may’ get picked up as potentially harmful by Antivirus Programs and deleted. They are not harmful, this is a false positive given because of the compiler used. If this happens restore the file and exclude the folder from future scans to use it. This seems to happen mostly on AVG Free and Norton. If you are using the Auto Update feature on pro versions then you will need to disable the AV program or exclude the folder from scans before running the update again.
Credits: ChainsDD for Superuser, Chainfire for SuperSU and kernel patches, koush and the clockworkmod team for cwm and the universal driver pack, 1wayjonny for the adb/fastboot driver pack, Adam Lange for all his support and help with the insecure kernels, Viperboy for the Knox Disabler app, Stephen Erickson for the BusyBox installer app, BurrowsApps for the Root Checker app, NextApp for the SD Fix app, fOmey for TWRP for the Galaxy Gear.
--------------------------------------------------------------
WHAT IS THE DIFFERENCE BETWEEN PUBLIC (FREE) AND PROFESSIONAL (DONATE) VERSIONS?
THE PUBLIC VERSION OF THE TOOLKIT INCLUDES EVERYTHING YOU COULD NEED TO MANIPULATE AND ROOT YOUR DEVICE.
ACTIVATING THE PROFESSIONAL VERSION ADDS THE MOST USEFUL FUNCTION IN THE TOOLKIT, THE ABILITY TO CHECK FOR ‘AUTO UPDATES’ DIRECTLY VIA THE TOOLKIT AND HAVE THEM PUSHED TO YOUR PC RIGHT AWAY AS SOON AS THEY ARE UPLOADED WITHOUT NEEDING TO DOWNLOAD THE WHOLE TOOLKIT EVERY TIME. YOU WILL ALWAYS HAVE THE LATEST VERSION AS SOON AS IT IS MADE AVAILABLE. THIS MEANS SMALLER UPDATES CAN BE SENT OUT MORE FREQUENTLY, SUCH AS ADDING A SINGLE FUNCTION, FIXING A BUG OR ADDING COMPATIBILITY FOR A SINGLE CARRIER. THE SMALLER UPDATES WILL BE COMPILED AND RELEASED TO THE XDA COMMUNITY AS A FULL (PUBLIC) DOWNLOAD VERSION SO PROFESSIONAL VERSIONS ARE ALWAYS UPDATED SOONER.
THE PRO VERSION ALSO ADDS THE ABILITY TO CHECK FOR THE LATEST VERSION OF SUPERUSER AND RECOVERY FILES AND DOWNLOAD THEM DIRECTLY TO THE TOOLKIT.
THE ‘QUICK PICKS’ SECTION[/B] ALLOWS YOU TO PROGRAM UPTO 10 SLOTS WITH TASKS THAT YOU MAY PERFORM ON A REGULAR BASIS OR JUST WANT TO KEEP A SET OF TASKS IN 1 PLACE. THEN JUST SELECT THE SLOT AND IT WILL REMEMBER ALL YOUR SETTINGS FOR THAT TASK AND RUN IT.
PRO USERS CAN ALSO SELECT THE “ANY BUILD” OPTION IN THE BUILD SELECTION SCREEN TO ROOT ANY BUILD AS LONG AS THE VERSION IS SUPPORTED (USEFUL IF YOUR BUILD IS NOT LISTED).
MORE IMPORTANTLY DONATING SHOWS YOUR APPRECIATION AND ALLOWS THE TOOLKIT TO CONTINUE TO EVOLVE AND GROW.
AUTO REPLY LINKS FOR PAYPAL TO GET A CODE INSTANTLY CAN BE FOUND AT http://goo.gl/nyGqv
--------------------------------------------------------------
PLEASE READ THE *HELP* PAGE AT http://www.skipsoft.net/?page_id=1269 OR USE THE INFORMATION SECTION WITHIN THE TOOLKIT IF YOU HAVE ANY QUESTIONS. I HAVE TAKEN A LOT OF TIME TO WRITE IT AND SOMETHING ON THERE SHOULD ANSWER 99% OF PROBLEMS.
--------------------------------------------------------------
1. INSTALLING ADB/FASTBOOT DRIVERS
The first thing you need to do is to install the adb/fastboot drivers. These are needed so that you can unlock your bootloader, root your device and perform other adb/fastboot functions.
THE DRIVERS CAN BE INSTALLED DIRECTLY VIA THE TOOLKIT. OPTION 1 IN THE MAIN MENU.
If drivers are not installed or there is an exclamation mark next to the device:
Plug the device in to a usb cable directly connected to your motherboard.
In the Device Manager a new item, usually called Android 1.0 should pop up in the list.
Right click on the device item then left click on Update Driver Software. Select 'browse my computer' and then 'Let me pick from a list'.
If no adb interface driver appears in the list then untick 'Show compatible hardware' and find the Android or Samsung adb interface driver.
If you cannot find either of these click Have Disk, browse to the Toolkit install folder, drivers folder, click on android_winusb.inf and click Open.
Click OK and select Google ADB Interface.
Make sure you have USB debugging enabled in settings, developer options. In Android 4.2.2 or later you have to enable the developer options screen by going to settings, About on your device and click on Build number at the bottom 7 times until it says You are now a developer. If you have already enabled usb debugging then unplug/replug the usb cable.
On Android 4.2.2 or later when you replug the usb cable after enabling usb debugging for the first time you will get a popup asking you to authenticate your pc. Tick 'Always allow' then click 'ok'.
--------------------------------------------------------------
2. USING SKIPSOFT UNIFIED ANDROID TOOLKIT
When starting the Toolkit you will first be asked which device you want to work with. Working folders will be created and the device files downloaded. You will then be taken to the Model/Build selection screen where you can do a number of things (other than select your model/build): Type '00' to enter your activation code and enable pro features, 'i' will take you to the Information and Help Section, 'a' will give you information on how to add support for a new build.
Supported builds are listed in the Model/Build selection screen and typing the associated number (i.e. 11) will download needed boot and recovery files (stock and custom recovery) then check for and download the latest superuser files available and custom recovery (pro versions only), verify all the files and start the Main Menu. You can now use all the functions and tools the Android Toolkit offers. Pro users can select the "any build" option to root any build (useful if your build is not listed).
--------------------------------------------------------------
USEFUL INFORMATION
How to get into Recovery Mode
1. Unplug the USB cable.
2. Shut down the phone.
3. Hold down the 'HOME' + 'VOLUME UP' buttons and press the 'POWER' button for about 5 seconds to enter Recovery Mode.
How to get into Download Mode (For Odin)
1. Unplug the USB cable.
2. Shut down the phone.
3. Hold down the 'HOME' + 'VOLUME DOWN' buttons and press the 'POWER' button for about 2 seconds until a WARNING! Screen appears. Press the 'VOLUME UP' button to enter Download Mode.
--------------------------------------------------------------
*DISCLAIMER*
I take no responsibility for any fault or damage caused by any procedures within this guide. No warranties of any kind are given.
**FAQ**
Q. What is ADB Shell?
Adb shell is a linux command line tool (because android is based on linux) used to send commands to your android device. For S-ON devices, this is crucial for modifying files in the /system partition (where the rom sits) as you cannot modify anything in /system when the rom is running without S-OFF (e.g removing system apps).
From Google:
Android Debug Bridge (adb) is a versatile tool lets you manage the state of an emulator instance or Android-powered device. It is a client-server program that includes three components:
A client, which runs on your development machine. You can invoke a client from a shell by issuing an adb command. Other Android tools such as the ADT plugin and DDMS also create adb clients.
A server, which runs as a background process on your development machine. The server manages communication between the client and the adb daemon running on an emulator or device.
A daemon, which runs as a background process on each emulator or device instance.
----------------------------------------------------------------------------
Q. I flashed CWM but each time I reboot the Stock Recovery is back
There is an auto recovery restore system on Android that will reflash the Stock Recovery if you flash CWM on a Stock Rom.
Use Root Explorer to Mount the system folder as R/W (or use a free app from the Market). Delete the file recovery-from-boot.p from /system. Now when you flash CWM Recovery it will NOT be overwritten after a reboot. You can also use the Toolkit to rename the files if you wish.
----------------------------------------------------------------------------
Q. What is the difference between Nandroid and Titanium backup?
A NANDROID will backup the whole system including boot, system, data and recovery partitions so you can restore a complete rom and all data and settings.
Essentially Titanium Backup is used to backup apps and associated user data. These could be restored AFTER a full wipe and a new Rom had been flashed on your phone.
The other option now which google added into the new adb command list is the adb backup which is in the ToolKit and can do the same job as Titanium Backup but will store the data on your PC rather than on the phone (where it takes up space and could be deleted).
----------------------------------------------------------------------------
Q. When would i perform a nandroid vs a titanium backup?
You would perform a nandroid backup to back up your entire system including boot image and data and system partitions so you can restore your entire system back to that particular point in the future.
You would use Titanium Backup mainly to back up your installed apps and settings so they could be reinstalled easily and quickly on any future roms. You can also choose individual apps to backup or restore on Titanium Backup whereas if you restore your boot partition via CWM Recovery you are stuck with the whole lot.
----------------------------------------------------------------------------
Q. When I try to open the ToolKit I get a box pop up for a split second and then it goes away. My AntiVirus program says the file may be harmful.
The exe files I compiled are not digitally signed with a Microsoft certificate (as they cost money) so certain AntiVirus programs (mainly Norton and AVG Free) will pick it up as potentially harmful when it is not. They pick up ANY file that doesnt contain a purchased Microsoft certificate in the same way. Restore the deleted file and exclude it from further scans and it will be fine.
----------------------------------------------------------------------------
Q. I donated but where do I get my activation code from?
Donation Codes are sent out manually to your PayPal email address [unless otherwise stated] after a confirmation email from PayPal has been receive. The Code can then be entered in the ToolKit Settings, Activate Donators Features Screen. This will enable The Auto Updates, Quick Picks and Extras Features in the ToolKit. Please be patient when waiting for the Code to be sent as it depends very much on what I am doing and whether I am at my PC when the donation is made. Please do not post in the ToolKit's thread or pm me asking for the activation code as it clogs up the thread and my messages. If you haven't received your code after 24 hours then feel free to email me via the skipsoft.net contact page.
Don't worry that you have been forgotten about, I check all emails personally and will deal with it as soon as I can.
----------------------------------------------------------------------------
Q. I have Windows 8 and cannot install the drivers
How to Disable Driver Signature Enforcement in Windows 8:
From the Metro Start Screen, open Settings (move your mouse to the bottom-right-corner of the screen and wait for the pop-out bar to appear, then click the Gear icon).
Click ‘More PC Settings’.
Click ‘General’.
Scroll down, and click ‘Restart now’ under ‘Advanced startup’.
Wait a bit.
Click ‘Troubleshoot’.
Click ‘Advanced Options’
Click ‘Windows Startup Settings’
Click Restart.
When your computer restarts, select ‘Disable driver signature enforcement‘ from the list. You can now load your modified driver. Reboot again once the driver is installed and all will be well.
----------------------------------------------------------------------------
Q. I flashed the Stock Firmware Image. Odin flashes the file successfully and the phone reboots but it stays stuck on the samsung logo
If the firmware tar file does not include a userdata image (which most Samsung firmware do not) then your userdata partition will be left from your previous setup. If this is incompatible with the new firmware because of build or something else then your system will freeze on boot up.
This is easily fixable by holding the Volume UP, Home and Power buttons all at the same time for about 10 seconds until the device reboots to the Stock Recovery screen. Use the Volume Down button to scroll down to 'wipe data/factory reset' and press the Home button to select it. Go down to yes to confirm and your userdata partition will be wiped. Your device should now boot fine.
**RESERVED FOR MANUAL INSTRUCTIONS**
How To Videos on the Samsung Galaxy Note II ToolKit
Reserved for how to videos on this incredible toolkit!
http://www.youtube.com/playlist?list=PLwCVKEYxr_z7FBQYT32dbYw_kdSJmSDH2
How To Root
http://www.youtube.com/watch?v=M9zF6x1MURM
How To Flash Stock Recovery
http://www.youtube.com/watch?v=9CL5x84Tu_U
i did this now im stuck in boot loops anyone know what i should to [email protected]
tfaulk88 said:
i did this now im stuck in boot loops anyone know what i should to [email protected]
Click to expand...
Click to collapse
You did what exactly?
Mark.
tfaulk88 said:
i did this now im stuck in boot loops anyone know what i should to [email protected]
Click to expand...
Click to collapse
Worked for me! https://twitter.com/wwjoshdew/status/261983982898511872
ToolKit v2.0.0 (27th October 2012)
+Added FULL support for Sprint (SPH-L900)
Click to expand...
Click to collapse
When you say full support does that mean you have the factory images?
scrosler said:
When you say full support does that mean you have the factory images?
Click to expand...
Click to collapse
That should fix a few soft bricks if so
Sent from my SPH-L900 using xda premium
thanks
thank you so much
Not updating?
Not able to updat from ver 1.1 to ver 2.0? I've donated...
Thanks for any help or info...
Didnt the OP say multiwindow at one point? Was that a typo or am i dreaming?
Thanks,
JD
i tried to flash the stock image now im getting firmware upfrade encountered an issue please select recovery mode in kies and try again
---------- Post added at 12:32 PM ---------- Previous post was at 11:36 AM ----------
has anyone flashed back to stock with this tool kit with success
JudasD said:
Didnt the OP say multiwindow at one point? Was that a typo or am i dreaming?
Thanks,
JD
Click to expand...
Click to collapse
Yeah I saw it too. Imagine my disappointment when I couldn't find a hint of the option. The toolkit is still really good. I hope such a feature is added soon.
Sent from my SPH-L900 using Tapatalk 2
Sess said:
Yeah I saw it too. Imagine my disappointment when I couldn't find a hint of the option. The toolkit is still really good. I hope such a feature is added soon.
Sent from my SPH-L900 using Tapatalk 2
Click to expand...
Click to collapse
That was for the N7100 thread lol and yes I did take it off as I thought it would be confusing. The Multiwindow function was added in the ALJ3 firmware and I think most of the US Models are on the ALJ1 firmware at the moment so as soon as your firmware gets updated or someone posts a mod patch you should be able to use it. Its one of the best functions I have seen on a phone and very useful on the big screen.
Mark.
tfaulk88 said:
i tried to flash the stock image now im getting firmware upfrade encountered an issue please select recovery mode in kies and try again
---------- Post added at 12:32 PM ---------- Previous post was at 11:36 AM ----------
has anyone flashed back to stock with this tool kit with success
Click to expand...
Click to collapse
What stock image?
The stock images listed in the download section are only N7100 models right now but hopefully some images should be leaked soon for the other variants.
Mark.
WhiteEVO said:
Not able to updat from ver 1.1 to ver 2.0? I've donated...
Thanks for any help or info...
Click to expand...
Click to collapse
I am trying to upload the v2.0.0 Auto Update version to my server but my hoster only allows files upto a certain size so I have had to emai them to explain what the file is and why I need to upload it. Hopefully it will be resolved tonight but you can allways download the full version for now as it will install over 1.1.0 without problems. This was a huge update in terms of file size so the update size is more than half the size of the entire toolkit lol.
Mark.
scrosler said:
When you say full support does that mean you have the factory images?
Click to expand...
Click to collapse
No there are no factory images available yet so I guess its not 100% full lol.
As you are a recognised dev can you get me the mount points for the sprint model please? I need to know what/if changes there are over the N7100 model.
Mark.
mskip said:
That was for the N7100 thread lol and yes I did take it off as I thought it would be confusing. The Multiwindow function was added in the ALJ3 firmware and I think most of the US Models are on the ALJ1 firmware at the moment so as soon as your firmware gets updated or someone posts a mod patch you should be able to use it. Its one of the best functions I have seen on a phone and very useful on the big screen.
Mark.
Click to expand...
Click to collapse
Well that would explain it. I was perusing the original threads for quite a while before I was able to get the phone. It's very likely that I just confused the two. I hope the update comes out soon. Videos of multi window on youtube are quite awesome.
Sent from my SPH-L900 using Tapatalk 2
Wow, I mean wow is this slick, so easy, so nice this tool kit is BOSS! seriously awesome work to everyone involved in not only the toolkit, but the rooting and recovery, everything so freakin' slick!
I was so excited to get this phone I didn't even consider rooting it until I was standing in the store paying for it, then It was like someone kicked me in the gut, I hope they can get root on this pretty quick, no way did I think it would be the first day, let alone this full blown tool kit so soon.
So yeah, once again nice job!
INTRODUCING THE SAMSUNG GALAXY NOTE2 TOOLKIT
GSM (GT-N7100) and LTE (GT-N7105) SUPPORTED. THREAD: http://forum.xda-developers.com/showthread.php?t=1923956
AUSTRALIAN GSM (GT-N7100T) and LTE (GT-N7105T) SUPPORTED. USE GSM THREAD
SPRINT (SPH-L900) SUPPORTED. THREAD: http://forum.xda-developers.com/showthread.php?t=1957155
TMOBILE (SGH-T889) SUPPORTED. THREAD: http://forum.xda-developers.com/showthread.php?t=1957720
MOBILICITY, VIDEOTRON, WIND [SGH-T889V] SUPPORTED. NO THREAD YET. USE TMOBILE THREAD
AT&T (SGH-L317) SUPPORTED. THREAD: http://forum.xda-developers.com/showthread.php?t=2052779
BELL, ROGERS, SASKTEL, TELUS [SGH-I317M] SUPPORTED. NO THREAD YET. USE AT&T THREAD
VERIZON ([SCH-I605]) SUPPORTED. THREAD: http://forum.xda-developers.com/showthread.php?t=2052788
US CELLULAR (SCH-R950) SUPPORTED. NO THREAD YET. USE ANY
KOREAN SK TELECOM [SHV-E250S] SUPPORTED. NO THREAD YET. USE ANY
NOTE: If you want a new build added to the Toolkit then download and install, Type 'A' in the Model Selection screen and follow the instructions.
HOW TO VIDEOS ARE ON POST#4 (THANKS TO WWJOSHDEW) MAKE SURE YOU HAVE A LOOK AT THEM AS A VIDEO IS WORTH A THOUSAND WORDS
FUNCTIONS OF SAMSUNG GALAXY NOTE2 TOOLKIT V4.1.0 [9TH APRIL 2013]
Install drivers automatically
Backup/Restore a single package or all apps, user data and Internal Storage
Backup your /data/media (virtual SD Card) to your PC for a Full Safe backup of data
Root any public build (different options)
Root with Superuser (ChainsDD) or SuperSU (Chainfire) via CWM (works on ANY build)
[*]Root+busybox+rename recovery restore files via Custom Recovery
[*]Unroot (delete root files and busybox)
[*]Many root/unroot options including adb, recovery and sideload via custom recovery
[*]Perform a FULL NANDROID Backup of your system via adb and save in Custom Recovery format on your PC
[*]Pull /data and /system folders, compress to a .tar file and save to your PC
[*]Auto Update ToolKit to latest push version on startup (donator feature)
[*]Dump selected Phone Partitions, compress to a .zip file with md5 and save to your PC
[*]Install BusyBox binary on phone
[*]Flash Stock Recovery
[*]Flash CWM Recovery (thanks to Clockworkmod Team) or TWRP Recovery (thanks to Team Win)
[*]Rename Recovery Restore files if present
[*]Flash Insecure Boot Image for adb mode
[*]Flash Stock Boot Image back to your phone
[*]Create tar file to flash via Odin (from upto 10 image files) with 1-click process
[*]Download, Extract and Flash Stock Rom (full DETAILED steps) ESSENTIAL FOR WARRANTY RETURNS
[*]Rip cache.img to zip file in CWM format for editing and flashing (thanks to Adam Lange)
[*]Install a single apk or multiple apk's to your phone (being worked on)
[*]Push Files from your PC to your phone
[*]Pull Files from your phone to your PC
[*]Set Files Permissions on your phone
[*]Dump selected LogCat buffers to your PC
[*]Dump BugReport to your PC (if installed)
[*]Help, Information Screen for various tasks
[*]Mods Section to Modify your phone (being worked on)
[*]Reboot Phone options in adb mode
[*]Change background, text colour in ToolKit
[*]Device Information screen which pulls info directly from device
[*]Activate Professional features from within the ToolKit
--------------------------------------------------------------
Mod edit: Download link removed
MD5 Sum for V4.1.0: 37360aabdf3869aad55d12dd2c2b0b07
NOTE: As the ToolKit.exe and ModsSection.exe files are not Digitally Signed with a Microsoft Certificate they 'may' get picked up as potentially harmful by Antivirus Programs and deleted on first run. If this happens restore the file and exclude it from future scans to use it. This seems to happen mostly on AVG Free and Norton which is why I switched to BitDefender which is much better.
IMPORTANT: ONLY FLASH ROMS THAT ARE SPECIFICALLY MADE FOR YOUR PHONES MODEL NUMBER AS FLASHING AN INCORRECT ROM CAN SOFT BRICK YOUR DEVICE!
Credits: ChainsDD for Superuser, Chainfire for SuperSU, Chenglu for modded cwm.
--------------------------------------------------------------
WHAT IS THE DIFFERENCE BETWEEN FREE (PUBLIC) AND DONATE (PROFESSIONAL) VERSIONS?
THE FREE PUBLIC VERSION OF THE TOOLKIT INCLUDES EVERYTHING YOU COULD POSSIBLY NEED TO MANIPULATE YOUR PHONE. NOTHING IS RESTRICTED. ACTIVATING THE DONATE VERSION WILL ADD THE ABILITY TO CHECK FOR UPDATES VIA THE TOOLKIT AND HAVE THEM PUSHED TO YOUR PC RIGHT AWAY AS SOON AS THEY ARE UPLOADED TO MY SERVER WITHOUT NEEDING TO DOWNLOAD THE WHOLE TOOLKIT EVERY TIME. THIS ALSO MEANS SMALLER UPDATES CAN BE SENT OUT MORE FREQUENTLY SUCH AS ADDING A SINGLE FUNCTION, FIXING A BUG OR ADDING COMPATIBILITY FOR A SINGLE VARIANT OR CARRIER SO DONATOR VERSIONS WILL BE UPDATED SOONER. IF YOU ARE NOT ABLE TO, OR DO NOT WANT THE AUTO UPDATE FEATURE THEN ALL UPDATES WILL BE COMPILED AND RELEASED TO THE XDA COMMUNITY AS A FULL DOWNLOAD VERSION AS SOON AS TIME ALLOWS AND THERE ARE ENOUGH UPDATES TO WARRANT IT. DONATORS WILL ALSO HAVE THE QUICK PICKS AND EXTRAS SECTIONS UNLOCKED AND THE 'NAG' SCREEN ON EXIT WILL BE DISABLED. NEW DONATOR FEATURES WILL ALSO BE ADDED TO THE TOOLKIT IN THE FUTURE.
AUTO REPLY LINKS FOR PAYPAL AND GOOGLE CHECKOUT TO GET A CODE INSTANTLY CAN BE FOUND AT http://goo.gl/nyGqv
AUTO UPDATES ARE BY FAR THE EASIEST WAY TO KEEP THE TOOLKITS UP TO DATE AS I HAVE LOTS OF OTHER TOOLKITS TO LOOK AFTER. IF ANYONE HAS ANY VIEWS ON THIS PLEASE PM ME OR CONTACT ME AT [email protected]. PLEASE DO NOT POST YOUR VIEWS IN THIS THREAD AS I WANT TO KEEP IT CLEAN FOR USER SUPPORT.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(Changelog at the Bottom of Post#1)
--------------------------------------------------------------
PLEASE READ THE *FAQ* IN POST#2 BEFORE ASKING QUESTIONS
--------------------------------------------------------------
1. INSTALLING GALAXY NOTE2 DRIVERS
The first thing you need to do is to install the drivers. These are needed so that you can communicate with the phone via the PC and perform the tasks that the ToolKit offers.
NOTE: If you have Kies installed then it is advisable to uninstall it first to avoid conflicts.
a. Make sure your phone is booted into Android and the USB cable is unplugged.
b. Select Option 1 in the ToolKit to install the Samsung USB Driver pack. This should install all the neccessary drivers you need.
C. While the drivers are installing make sure that USB Debugging is enabled on your phone via the Settings, Developer options Screen.
d. After the drivers have been installed connect the USB cable and the PC should detect the phone and install the correct drivers. This will also happen when you enter Download Mode and Recovery Mode for the first time.
e. If you want to check the drivers then go to your Control Panel on your PC and open the Device Manager. With the USB cable connected you should see a device listed as 'Samsung Android Phone' or something similar and a driver attached to it.
NOTE: If you are having trouble with your device being detected or the drivers installing correctly then you could try rebooting your phone, using a different usb port and making sure no other drivers are installed on your pc.
--------------------------------------------------------------
2. USING MSKIPS' SAMSUNG GALAXY NOTE2 TOOLKIT
a. Download the Samsung Galaxy Note2 ToolKit package and run to install the ToolKit to your PC. The installation will also create a Shortcut on your desktop for easy access. You have the option to include or exclude the drivers files at installation so if you already have your drivers set up and are just updating the ToolKit then you can untick the drivers if you wish.
b. Once the ToolKit is installed make sure your phone is booted and plugged in via USB cable and double click on the shortcut on your desktop to run it.
c. You will be asked if you want to check for an Update. If you type 'yes' this will download and check the latest version numbers against the versions in the ToolKit. If there is an update available then you will have the option to download and install it (professional feature).
d. You will now be presented with a Model Selection Screen to choose the Model/Build that you are currently on. Type the number that corresponds to your desired selection. For example type '12' for INTERNATIONAL GSM MODEL [GT-N7100] 4.1.1 [Build ALJ1-ALJ3]. If you cannot find the build your device is using then type 'h' to select the HELP option to get more info.
NOTE: If you have a new build that isnt covered by the Toolkit you can also type 'a' in the Model Selection screen to see instructions on how to pull your stock image and send it to [email protected] so support can be added.
e. The Toolkit will now locate and download the boot image pack for your chosen Model. This is a new feature so the Toolkit is not limited to how many Models can be added and it cuts down ALOT on the download size. After the zip file has finished downloading it will be extracted to the correct folders and the files checked to make sure everything is ok.
f. When you enter the Main Menu you will see 'Adb Mode' at the top. If you have installed your drivers correctly then you will see your devices serial number under the text with 'device' next to it. If you see this then your device is connected and you can carry on.
NOTE: If you haven't installed the drivers and don't see a serial number at the top then this is the FIRST thing you want to do so the Toolkit can operate properly.
g. Each option in the ToolKit has full information on what it is and how to use it.
--------------------------------------------------------------
3. FLASHING A ROM, RADIO OR KERNEL VIA CWM RECOVERY
a. Download your chosen Rom, Radio or Kernel from the Development Forum, then make sure your phone is booted up as normal and connect your usb cable so it goes into MTP Mode. Copy the .zip file (DO NOT UNZIP IT FIRST) to the 'Internal Storage' part on your phone. Do not copy it to a Sub Directory as it will be harder to find when flashing it.
b. Enter CWM Recovery (shut down the phone then hold down the 'HOME' + 'VOLUME UP' buttons and press the 'POWER' button for about 5 seconds).
c. Select 'Install zip from sdcard' and select 'choose zip from sdcard' if the file is on Internal Memory.
d. Scroll to your zip file and select. Then select 'Yes' in the list to start flashing.
e. When flashing is finished press the BACK Button to go back until you get to the Main Menu and then select 'reboot system now' to reboot your phone into Android.
--------------------------------------------------------------
4. FLASHING A ROM, RADIO OR KERNEL VIA DOWNLOAD MODE USING ODIN
Odin can be used to flash image files or parts of your phone. You can flash something as simple as a boot image or a complete system. Everything is packed in a tar or tar.md5 file on your PC and flashed via Odin which is a Windows OS program.
a. Make sure you have your tar file stored on your PC.
b. Reboot your phone to Download Mode [shut down your phone, then hold down the Home + Volume DOWN Buttons and press the Power Button for about 2 seconds until a Warning screen appears. Press Volume UP to continue to Download Mode.
c. Connect your phone via usb and the first box at the top under ID:COM should turn blue and have some text in it. If you are using Download Mode on your phone for the first time then you will notice drivers being installed to use it.
d. The site or page you downloaded the file from will usually give you instructions to set Odin but if not you want to load boot/recovery/system files to the PDA location and have 'Auto Reboot' and 'F.Reset Time' ticked and nothing else.
e. Click on 'Start' to start the flash. You can see what is happening in the text box in the lower left.
--------------------------------------------------------------
USEFUL INFORMATION
How to get into Recovery Mode
1. Unplug the USB cable.
2. Shut down the phone.
3. Hold down the 'HOME' + 'VOLUME UP' buttons and press the 'POWER' button for about 5 seconds to enter Recovery Mode.
How to get into Download Mode (For Odin)
1. Unplug the USB cable.
2. Shut down the phone.
3. Hold down the 'HOME' + 'VOLUME DOWN' buttons and press the 'POWER' button for about 2 seconds until a WARNING! Screen appears. Press the 'VOLUME UP' button to enter Download Mode.
--------------------------------------------------------------
ChangeLog
ToolKit v4.1.0 (9th April 2013)
+Updated complete Toolkit structure for easier support and faster updates
+Added GT-N7100T and GT-N7105T models to the support list
+Added 4.1.2 support for many models. See screenshot for full list
+Updated CWM and TWRP Recovery to the latest model specific version
+Added TWRP NAND backup/restore procedure to backups section
+Updated SuperSU Root procedure to V1.25
+Updated Samsung usb drivers to 1.5.18.0
+Added more error detection and updated many parts of the Toolkit procedures
+Added Activation option and support procedure for new builds to Model Screen
+Updated Stock firmware download section with new Samsung images
+Adb server is now shut down if you exit from Model Selection screen
+Added more error control Toolkit processes
+Updated mods section
ToolKit v3.0.0 (18th December 2012)
+Rewrote soo many parts its hard to list them all
+Changed the Model Selection screen
+Split up images for all supported models to make them easier to distinguish
+Added support for Verizon, GT-N7105 (lte), AT&T and Korean SK Telecom
+Added new options to Root/Unroot Screen
+Added root+busybox+rename recovery restore files via Custom Recovery
+Added Root/Unroot via Sideload feature in Recovery
+Updated CWM Recovery to 6.0.1.9
+Updated TWRP Recovery to 2.3.2.3 for all available Models
+Updated SuperSU to 0.99
+Added Device Information Screen
+Added instant reply donate link to Toolkit
+Soo many more behind the scene changes
ToolKit v2.0.0 (27th October 2012)
+Added FULL support for Sprint (SPH-L900)
+Added FULL support for TMobile (SGH-T889)
+Added FULL support for US Cellular (SCH-R950)
+Updated SuperSU Root zip file to V0.96
+Updated CWM Recovery to V6.0.1.5
+Added TWRP Recovery V2.3.1.1
+Added option on all Root procedures to root with Superuser (ChainsDD) or SuperSU (Chainfire)
+Added option in ALLINONE Root routine to flash cwm or twrp Recovery
+Improved Root procedure on all builds
+Made some edits for Toolkit stability
+More tweaks
ToolKit v1.0 (7th Oct 2012)
+First version of Samsung Galaxy Note2 ToolKit released
--------------------------------------------------------------
*DISCLAIMER*
I take no responsibility for any fault or damage caused by any procedures within this guide. No warranties of any kind are given.
**FAQ**
Q. What is ADB Shell?
Adb shell is a linux command line tool (because android is based on linux) used to send commands to your android device. For S-ON devices, this is crucial for modifying files in the /system partition (where the rom sits) as you cannot modify anything in /system when the rom is running without S-OFF (e.g removing system apps).
From Google:
Android Debug Bridge (adb) is a versatile tool lets you manage the state of an emulator instance or Android-powered device. It is a client-server program that includes three components:
A client, which runs on your development machine. You can invoke a client from a shell by issuing an adb command. Other Android tools such as the ADT plugin and DDMS also create adb clients.
A server, which runs as a background process on your development machine. The server manages communication between the client and the adb daemon running on an emulator or device.
A daemon, which runs as a background process on each emulator or device instance.
----------------------------------------------------------------------------
Q. I flashed CWM but each time I reboot the Stock Recovery is back
There is an auto recovery restore system on Android that will reflash the Stock Recovery if you flash CWM on a Stock Rom.
Use Root Explorer to Mount the system folder as R/W (or use a free app from the Market). Delete the file recovery-from-boot.p from /system. Now when you flash CWM Recovery it will NOT be overwritten after a reboot. You can also use the Toolkit to rename the files if you wish.
----------------------------------------------------------------------------
Q. What is the difference between Nandroid and Titanium backup?
A NANDROID will backup the whole system including boot, system, data and recovery partitions so you can restore a complete rom and all data and settings.
Essentially Titanium Backup is used to backup apps and associated user data. These could be restored AFTER a full wipe and a new Rom had been flashed on your phone.
The other option now which google added into the new adb command list is the adb backup which is in the ToolKit and can do the same job as Titanium Backup but will store the data on your PC rather than on the phone (where it takes up space and could be deleted).
----------------------------------------------------------------------------
Q. When would i perform a nandroid vs a titanium backup?
You would perform a nandroid backup to back up your entire system including boot image and data and system partitions so you can restore your entire system back to that particular point in the future.
You would use Titanium Backup mainly to back up your installed apps and settings so they could be reinstalled easily and quickly on any future roms. You can also choose individual apps to backup or restore on Titanium Backup whereas if you restore your boot partition via CWM Recovery you are stuck with the whole lot.
----------------------------------------------------------------------------
Q. When I try to open the ToolKit I get a box pop up for a split second and then it goes away. My AntiVirus program says the file may be harmful.
The exe files I compiled are not digitally signed with a Microsoft certificate (as they cost money) so certain AntiVirus programs (mainly Norton and AVG Free) will pick it up as potentially harmful when it is not. They pick up ANY file that doesnt contain a purchased Microsoft certificate in the same way. Restore the deleted file and exclude it from further scans and it will be fine.
----------------------------------------------------------------------------
Q. I have Windows 8 and cannot install the drivers
How to Disable Driver Signature Enforcement in Windows 8:
From the Metro Start Screen, open Settings (move your mouse to the bottom-right-corner of the screen and wait for the pop-out bar to appear, then click the Gear icon).
Click ‘More PC Settings’.
Click ‘General’.
Scroll down, and click ‘Restart now’ under ‘Advanced startup’.
Wait a bit.
Click ‘Troubleshoot’.
Click ‘Advanced Options’
Click ‘Windows Startup Settings’
Click Restart.
When your computer restarts, select ‘Disable driver signature enforcement‘ from the list. You can now load your modified driver. Reboot again once the driver is installed and all will be well.
----------------------------------------------------------------------------
Q. I flashed the Stock Firmware Image. Odin flashes the file successfully and the phone reboots but it stays stuck on the samsung logo
If the firmware tar file does not include a userdata image (which most Samsung firmware do not) then your userdata partition will be left from your previous setup. If this is incompatible with the new firmware because of build or something else then your system will freeze on boot up.
This is easily fixable by holding the Volume UP, Home and Power buttons all at the same time for about 10 seconds until the device reboots to the Stock Recovery screen. Use the Volume Down button to scroll down to 'wipe data/factory reset' and press the Home button to select it. Go down to yes to confirm and your userdata partition will be wiped. Your device should now boot fine.
**RESERVED FOR MANUAL INSTRUCTIONS**
Reserved for how to videos on this incredible toolkit!
http://www.youtube.com/playlist?list=PLwCVKEYxr_z7FBQYT32dbYw_kdSJmSDH2
How To Root
http://www.youtube.com/watch?v=M9zF6x1MURM
How To Flash Stock Recovery
http://www.youtube.com/watch?v=9CL5x84Tu_U
How To Manually Boot to Custom (or Stock) Recovery
http://www.youtube.com/watch?v=9m6Uugh8ps8&hd=1
Sent from my SPH-L710 using Tapatalk 2
Can i unroot with toolkit?.Many thank for awesome work..:good:
thank you! worked like a charm!!!
simplelife said:
Can i unroot with toolkit?.Many thank for awesome work..:good:
Click to expand...
Click to collapse
Yes you can.
Mark.
So does this add to the flash counter?
Tiffany84 said:
So does this add to the flash counter?
Click to expand...
Click to collapse
Flashing any custom firmware (boot, recovery) will add to the flash counter but im sure Chainfire will update his Triangle Away app to include the US variants.
Mark.
simplelife said:
Can i unroot with toolkit?.Many thank for awesome work..:good:
Click to expand...
Click to collapse
mskip said:
Yes you can.
Mark.
Click to expand...
Click to collapse
Just to be certain, I can unroot with this? How? We don't have a stock recovery since there is no stock firmware avail. Can you please clarify? Thanx bud.
GREAT work and thank you for getting this into an easy toolkit form, as many people will be helped out by this!! I was already rooted, as some others were too, but you created a tool that needs a BIG :good:
teshxx said:
Just to be certain, I can unroot with this? How? We don't have a stock recovery since there is no stock firmware avail. Can you please clarify? Thanx bud.
Click to expand...
Click to collapse
Well I keep asking for someone with adb root access to do an adb shell mount and send me the mount points so I can verify the partitions but noone is getting back to me.
If you or anyone else can send me the mount points then please do so asap. The unroot zip file will remove the su and superuser files along with busybox and cwm manager (if present) but it needs the correct system partition value to mount the system and run the script.
Mark.
Is TWRP supported on the TMo Note II?
mskip said:
Flashing any custom firmware (boot, recovery) will add to the flash counter but im sure Chainfire will update his Triangle Away app to include the US variants.
Click to expand...
Click to collapse
I will, I just need a stock recovery.img ! If you have it, please pass it to me (this goes for all US variants, btw).
I might get it to work as well if somebody can get me the stock kernel. Root first, then from a root shell:
Code:
dd if=/dev/block/mmcblk0p8 of=/data/local/tmp/kernel.img bs=4096
then from normal cmd:
Code:
adb pull /data/local/tmp/kernel.img
And post the kernel.img - should be 8mb
I will also need: Settings -> About device -> Build number
mskip said:
Well I keep asking for someone with adb root access to do an adb shell mount and send me the mount points so I can verify the partitions but noone is getting back to me.
If you or anyone else can send me the mount points then please do so asap. The unroot zip file will remove the su and superuser files along with busybox and cwm manager (if present) but it needs the correct system partition value to mount the system and run the script.
Mark.
Click to expand...
Click to collapse
Oh ok. I would, but I haven't rooted mine yet. Still deciding if I want to keep my grey one or exchange it for the white lolol. Hopefully, someone who is already rooted will be kind enough to do it for you.
Thanks for your effort and time.
Chainfire said:
I will, I just need a stock recovery.img ! If you have it, please pass it to me (this goes for all US variants, btw).
I might get it to work as well if somebody can get me the stock kernel. Root first, then from a root shell:
Code:
dd if=/dev/block/mmcblk0p8 of=/data/local/tmp/kernel.img bs=4096
then from normal cmd:
Code:
adb pull /data/local/tmp/kernel.img
And post the kernel.img - should be 8mb
I will also need: Settings -> About device -> Build number
Click to expand...
Click to collapse
PM sent w/ link for stock T889 kernel.img. build number is the file name. sorry i can't help with stock recovery.img since i already rooted and flashed CWM recovery.
---------- Post added at 11:43 AM ---------- Previous post was at 11:40 AM ----------
mskip said:
Well I keep asking for someone with adb root access to do an adb shell mount and send me the mount points so I can verify the partitions but noone is getting back to me.
If you or anyone else can send me the mount points then please do so asap. The unroot zip file will remove the su and superuser files along with busybox and cwm manager (if present) but it needs the correct system partition value to mount the system and run the script.
Mark.
Click to expand...
Click to collapse
hey mark, if u wanna post or PM me instructions i'll get u the mount points.
Chainfire said:
I will, I just need a stock recovery.img ! If you have it, please pass it to me (this goes for all US variants, btw).
I might get it to work as well if somebody can get me the stock kernel. Root first, then from a root shell:
Code:
dd if=/dev/block/mmcblk0p8 of=/data/local/tmp/kernel.img bs=4096
then from normal cmd:
Code:
adb pull /data/local/tmp/kernel.img
And post the kernel.img - should be 8mb
I will also need: Settings -> About device -> Build number
Click to expand...
Click to collapse
So nice to see you here. Thanks for all u do!!
Sent from my SGH-T889 using Tapatalk 2
I am getting issues with both TWRP and CWM. With TWRP, the data partition is unable to mount, making a full wipe a no go. With CWM, data partition can mount...but the external sd can't. Anyone else having these issues, or is it something on my end?
LvDisturbed1 said:
I am getting issues with both TWRP and CWM. With TWRP, the data partition is unable to mount, making a full wipe a no go. With CWM, data partition can mount...but the external sd can't. Anyone else having these issues, or is it something on my end?
Click to expand...
Click to collapse
I can use my extSD with CWM so it's something on your end. I used the toolkit for the N7100 but same stuff...
Chainfire said:
I will, I just need a stock recovery.img ! If you have it, please pass it to me (this goes for all US variants, btw).
I might get it to work as well if somebody can get me the stock kernel. Root first, then from a root shell:
Code:
dd if=/dev/block/mmcblk0p8 of=/data/local/tmp/kernel.img bs=4096
then from normal cmd:
Code:
adb pull /data/local/tmp/kernel.img
And post the kernel.img - should be 8mb
I will also need: Settings -> About device -> Build number
Click to expand...
Click to collapse
I just sent you a pm with the stock recovery.img from my device(T-Mobile Galaxy Note 2). My build number is JRO03C.T889UVALJ1. Hopefully this gives you what you need. Thanks again.
---------- Post added at 03:53 AM ---------- Previous post was at 03:43 AM ----------
mskip said:
Well I keep asking for someone with adb root access to do an adb shell mount and send me the mount points so I can verify the partitions but noone is getting back to me.
If you or anyone else can send me the mount points then please do so asap. The unroot zip file will remove the su and superuser files along with busybox and cwm manager (if present) but it needs the correct system partition value to mount the system and run the script.
Mark.
Click to expand...
Click to collapse
Just sent you a pm with the mount points for the T-Mobile Galaxy Note 2. Thanks for this tool. It's incredible.
GOOGLE PIXEL 2- SUPPORTS ALL MODELS WITH UNLOCKABLE BOOTLOADER UP TO THE LATEST ANDROID BUILDS.
SEE SUPPORT LIST FOR PUBLIC/PRO VERSIONS *HERE*
NOTE: Verizon models (not sure about ee) have locked the bootloader. In this case you will not be able to toggle the oem unlock setting to unlock the bootloader via the developer screen.
NOTE2: At the moment TWRP is still in alpha testing and lots of things do not work on it such as device decryption, mtp and backup. It's very risky to add this to the toolkit in this state as someone could easily brick their device if they dont know what they are doing so until a more stable version is made custom recovery will not be added.
The Unified Android Toolkit brings together Nexus, Google, Samsung and OnePlus Toolkits and supports many devices. There is also an option at startup to run a Basic Android Toolkit which any Android device can use to install drivers, make app backups, install apk files, reboot the device into different modes and run a command prompt for manual input.
FUNCTIONS OF UNIFIED ANDROID TOOLKIT
* Install correct adb/fastboot drivers automatically
* Backup/Restore a single package or all apps, user data and Internal Storage
* Backup your /data/media (virtual SD Card) to your PC for a Full Safe backup of data
* Root any public build automatically
* SkipRoot boot image to AutoRoot (selected builds)
* Sideload root/unroot files via Custom Recovery
* ALLINONE to Unlock, Flash Recovery, Root, Rename the restore file + install Busybox (G,N,O)
* ALLINONE to Flash Recovery, Root, Rename the recovery restore files + install Busybox (Samsung)
* Unlock/Re-Lock your Bootloader or check status (G,N,O)
* Download Google Stock Image files directly to the ToolKit (G,N,O)
* Check sha256 of google stock image before flashing
* Flash Google Stock Image (G,N,O)
* Flash any part of a stock firmware image to device [boot, system, recovery, etc.] (G,N,O)
* Custom Device Builder can add build support for listed device and add device support for any Samsung device with an unlocked bootloader [included in ULTIMATE, can be added as an extra]
* Download/sideload stock OTA image (G,N,O)
* Install Magisk Root on device [and uninstall if needed]
* Disable dm-verity check
* Install BusyBox binarys on device
* Rename the Recovery Restore File present on Stock Roms (if stock recovery is being restored after flashing custom recovery image)
* Flash Recovery [Stock, CWM, Philz_touch or Twrp Touch]
* Pull /data and /system folders, compress to a .tar file and save to your PC
* Auto Update Toolkit at startup (PRO ONLY)
* Auto Update superuser files to latest versions
* Auto Update Custom Recovery to latest versions [PRO ONLY]
* Disable forced encryption on device if needed
* Install Root Checker app by Burrows Apps
* Install Backup/Restore app by MDroid Apps
* Install EFS/Partition Backup/Restore app by Wanam
* Create tar with 1-Click for flashing via Odin
* Fix extSdCard write permissions in Android 4.4+
* Perform a FULL NANDROID Backup of your system via adb and save in Custom Recovery format on your PC (selected builds)
* Useful Mods, Fixes and Tools Section
* Extras, Tips and Tricks section (includes guides)
* Backup/Restore your /efs partition (gsm only)
* Dump selected Device Partitions, compress to a .zip file with md5 and save to your PC ( on builds with insecure image available)
* Mods section to automatically perform certain tasks on your device
* Boot to any recovery without Flashing it (G,N,O)
* Boot or Flash .img Files directly from your PC
* Quick Picks Professional Feature (10 slots)
* Install a single apk or multiple apk's to your device
* Push Files from your PC to your phone
* Pull Files from your phone to your PC
* Set Files Permissions on your device
* Pull and Trim your Radio Image (gsm models only) to your PC
* Dump selected LogCat buffers to your PC
* Dump BugReport to your PC
* Rip cache.img to zip file in CWM format
* Reboot device to Fastboot Mode or Android in fastboot mode
* Reboot device to Fastboot Mode, Recovery, Android or Download Mode in adb mode
* Turn Initial Start Screen On/Off for next use
* Sideload any zip file via Custom Recovery
* Basic Toolkit for use with ANY Android device
Key: G-Google Pixel, N-Nexus, O-OnePlus, S-Samsung
--------------------------------------------------------------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
--------------------------------------------------------------
SUPPORTED DEVICES AND LATEST SUPPORTED BUILDS *HERE*
DOWNLOAD THE SKIPSOFT UNIFIED ANDROID TOOLKIT *HERE* (FROM SKIPSOFT.NET)
NOTE: Key files are signed with a Digital Certificate from skipsoft.net but some may get picked up as potentially harmful by Antivirus Programs and deleted. They are not harmful, this is a false positive given because of the compiler used. If this happens restore the file and exclude the folder from future scans to use it. This seems to happen mostly on AVG Free and Norton. If you are using the Auto Update feature on pro versions then you will need to disable the AV program or exclude the folder from scans before running the update again.
Credits: ChainsDD for Superuser, Chainfire for SuperSU and kernel patches, koush and the clockworkmod team for cwm and the universal driver pack, 1wayjonny for the adb/fastboot driver pack, Adam Lange for all his support and help with the insecure kernels, Viperboy for the Knox Disabler app, Stephen Erickson for the BusyBox installer app, BurrowsApps for the Root Checker app, NextApp for the SD Fix app, fOmey for TWRP for the Galaxy Gear.
--------------------------------------------------------------
WHAT IS THE DIFFERENCE BETWEEN PUBLIC, PROFESSIONAL AND ULTIMATE VERSIONS?
THE PUBLIC VERSION OF THE TOOLKIT INCLUDES EVERYTHING YOU COULD NEED TO MANIPULATE AND ROOT YOUR DEVICE.
ACTIVATING THE PROFESSIONAL VERSION ADDS THE MOST USEFUL FUNCTION IN THE TOOLKIT, THE ABILITY TO CHECK FOR AUTO UPDATES DIRECTLY VIA THE TOOLKIT AND HAVE THEM PUSHED TO YOUR PC RIGHT AWAY AS SOON AS THEY ARE UPLOADED WITHOUT NEEDING TO DOWNLOAD THE WHOLE TOOLKIT EVERY TIME. YOU WILL ALWAYS HAVE THE LATEST VERSION AS SOON AS IT IS MADE AVAILABLE. THIS MEANS SMALLER UPDATES CAN BE SENT OUT MORE FREQUENTLY, SUCH AS ADDING A SINGLE FUNCTION, FIXING A BUG OR ADDING COMPATIBILITY FOR A SINGLE CARRIER. THE SMALLER UPDATES WILL BE COMPILED AND RELEASED TO THE XDA COMMUNITY AS A FULL (PUBLIC) DOWNLOAD VERSION SO PROFESSIONAL VERSIONS ARE ALWAYS UPDATED SOONER.
THE PRO VERSION ALSO ADDS THE ABILITY TO CHECK FOR THE LATEST VERSION OF CUSTOM RECOVERY FILES AND DOWNLOAD THEM DIRECTLY TO THE TOOLKIT.
THE QUICK PICKS SECTION ALLOWS YOU TO PROGRAM UP TO 10 SLOTS WITH TASKS THAT YOU MAY PERFORM ON A REGULAR BASIS OR JUST WANT TO KEEP A SET OF TASKS IN 1 PLACE. THEN JUST SELECT THE SLOT AND IT WILL REMEMBER ALL YOUR SETTINGS FOR THAT TASK AND RUN IT.
PRO USERS CAN ALSO SELECT THE ANY BUILD OPTION IN THE BUILD SELECTION SCREEN TO ROOT ANY BUILD AS LONG AS THE VERSION IS SUPPORTED (USEFUL IF YOUR BUILD IS NOT LISTED).
THE ULTIMATE MODE ALLOWS YOU TO ACTIVATE THE PRO MODE ON EVERY DEVICE MODULE THE TOOLKIT SUPPORTS. NO MORE NEED TO BUY A NEW PRO CODE EVERY TIME YOU BUY A NEW DEVICE. THE ULTIMATE MODE ALSO INCLUDES THE NEW CUSTOM BUILDER MODE WHICH LETS YOU ADD SUPPORT FOR NEW BUILDS EVEN BEFORE THE TOOLKIT CAN ADD IT. CUSTOM BUILDER MODE CAN ALSO ADD SUPPORT FOR SAMSUNG DEVICES THAT HAVEN'T YET BEEN ADDED TO THE TOOLKIT.
MORE IMPORTANTLY DONATING SHOWS YOUR APPRECIATION AND ALLOWS THE TOOLKIT TO CONTINUE TO EVOLVE AND GROW. WITHOUT YOUR SUPPORT THE TOOLKIT CANNOT EXIST.
AUTO REPLY LINKS FOR PAYPAL TO GET A CODE INSTANTLY CAN BE FOUND AT http://goo.gl/nyGqv
--------------------------------------------------------------
PLEASE READ THE *HELP* PAGE AT http://www.skipsoft.net/?page_id=1269 OR USE THE INFORMATION SECTION WITHIN THE TOOLKIT IF YOU HAVE ANY QUESTIONS. I HAVE TAKEN A LOT OF TIME TO WRITE IT AND SOMETHING ON THERE SHOULD ANSWER 99% OF PROBLEMS.
--------------------------------------------------------------
1. INSTALLING ADB/FASTBOOT DRIVERS
The first thing you need to do is to install the adb/fastboot drivers. These are needed so that you can unlock your bootloader, root your device and perform other adb/fastboot functions.
THE DRIVERS CAN BE INSTALLED DIRECTLY VIA THE TOOLKIT. OPTION 1 IN THE MAIN MENU.
If drivers are not installed or there is an exclamation mark next to the device:
Plug the device in to a usb cable directly connected to your motherboard.
In the Device Manager a new item, usually called Android 1.0 should pop up in the list.
Right click on the device item then left click on Update Driver Software. Select 'browse my computer' and then 'Let me pick from a list'.
If no adb interface driver appears in the list then untick 'Show compatible hardware' and find the Android or Samsung adb interface driver.
If you cannot find either of these click Have Disk, browse to the Toolkit install folder, drivers folder, click on android_winusb.inf and click Open.
Click OK and select Google ADB Interface.
Make sure you have USB debugging enabled in settings, developer options. In Android 4.2.2 or later you have to enable the developer options screen by going to settings, About on your device and click on Build number at the bottom 7 times until it says You are now a developer. If you have already enabled usb debugging then unplug/replug the usb cable.
On Android 4.2.2 or later when you replug the usb cable after enabling usb debugging for the first time you will get a popup asking you to authenticate your pc. Tick 'Always allow' then click 'ok'.
Newer devices also require you to enable OEM Unlocking in the developer section to allow the bootloader to be unlocked. Tap Developer options and enable OEM unlocking and USB debugging. (If OEM unlocking is disabled, connect to the Internet so the device can check in at least once. If it remains disabled, your device may be SIM locked by your carrier and the bootloader cannot be unlocked.)
--------------------------------------------------------------
2. USING SKIPSOFT UNIFIED ANDROID TOOLKIT
When starting the Toolkit you will first be asked which device you want to work with. Working folders will be created and the device files downloaded. You will then be taken to the Model/Build selection screen where you can do a number of things (other than select your model/build): Type '00' to enter your activation code and enable pro features if you have one, 'dr' will allow you to install drivers, 'i' will take you to the Information and Help Section, 'a' will give you information on how to add support for a new build.
Supported builds are listed in the Model/Build selection screen and typing the associated number (i.e. 11) will download needed boot and recovery files (stock and custom recovery) then check for and download the latest superuser files available and custom recovery (pro versions only), verify all the files and start the Main Menu. You can now use all the functions and tools the Android Toolkit offers. Pro users can select the "any build" option to root any build (useful if your build is not listed).
--------------------------------------------------------------
USEFUL INFORMATION
How to get into your FastBoot Mode
1. Turn your phone off
2. Unplug your usb cable if you have one plugged in
3. Keep holding the 'Volume Down' and 'Power' buttons to boot the phone into FastBoot Mode
How to get into Recovery
1. First boot into FastBoot Mode as described above
2. Scroll down with the 'Volume Down' button until it says 'Recovery mode' at the top and press the 'Power' button to enter Recovery
Show the Menu in the Stock Recovery Screen
1. Hold the Power button and keep holding as you press the Volume Up button quickly. The blue recovery menu screen should pop up.
--------------------------------------------------------------
*DISCLAIMER*
I take no responsibility for any fault or damage caused by using the Unified Android Toolkit. No warranties of any kind are given.
** FAQ **
** reserved if needed **
I have not added Magisk root for the Pixel 2 yet but if anyone wants it I can add it.
UPDATE FOR GOOGLE PIXEL 2 DEVICE FOR ALL USERS (PRO AND PUBLIC)
Changelog [Google Pixel 2] v1.0.2:
+Added FULL Support for Android 8.0.0 OPD1.170816.025, Nov 2017, EMR
+Added FULL Support for Android 8.0.0 OPD3.170816.023, Nov 2017, Verizon EMR
+Added above STOCK and OTA images to download/flash directly from Toolkit using option 9,1 [firmware download/flash] or 10,1 [ota download/sideload]
Pro users can just start the Toolkit as normal. After you have selected your device you will be notified there is an update available and can auto update. SIMPLE.
Non Pro users have a few extra steps.
1. Exit the Toolkit if it is open.
2. Run ToolkitClean.exe from the intallation folder (or the Start Menu)
3. Select the device from the list
4. Type ‘y’ or ‘yes’ (without the quotes) to delete the existing module files and settings for the device
5. Select option 63 to update to the latest md5 firmware check file (if you are downloading new firmware)
6. Restart the Toolkit, select the device and new module files will be downloaded/installed
If you want to donate to the device module project or purchase an Ultimate Code to unlock all devices/features please do it through the Toolkit so you get the right code fast.
I've used ADB for most of my rootable devices but also bought your Toolkit to support it's development and it certainly makes things easier for everyone to not make a mistake or skip a step.
Thanks for putting this together for the Pixel 2.
if my bootloader is already unlocked, can i use this tool to instal twrp and root WITHOUT wiping my device?
mjondj said:
if my bootloader is already unlocked, can i use this tool to instal twrp and root WITHOUT wiping my device?
Click to expand...
Click to collapse
Yes. Your device will be wiped after unlocking the bootloader. TWRP and root shouldn't cause another wipe.
mjondj said:
if my bootloader is already unlocked, can i use this tool to instal twrp and root WITHOUT wiping my device?
Click to expand...
Click to collapse
Let me know how rooting goes with the alpha version of TWRP. if it works fine I will look in to adding it (with lots of warnings).
UPDATE FOR GOOGLE PIXEL 2 DEVICE FOR ALL USERS (PRO AND PUBLIC)
This is to update your Toolkit.exe file so that adb/fastboot files can be automatically updated to the latest version. This should fix any problems with flashing November firmware images due to outdated files. This update will also fix pro users restarting to the wrong device module after taking an AutoUpdate (affective from the next update).
Pro users can just start the Toolkit as normal. After you have selected your device you will be notified there is an update available [v1.0.3] and can auto update. SIMPLE.
Non Pro users have a few extra steps.
1. Exit the Toolkit if it is open.
2. Run ToolkitClean.exe from the intallation folder (or the Start Menu)
3. Select the device from the list (option 09)
4. Type ‘y’ or ‘yes’ (without the quotes) to delete the existing module files and settings for the device
5. Select option 62 from the list to update Toolkit.exe to the latest version
6. Type ‘y’ or ‘yes’ (without the quotes) to delete the existing module files and settings for the device
7. Restart the Toolkit, select the device and new module files will be downloaded/installed
If you want to donate to the device module project or purchase an Ultimate Code to unlock all devices/features please do it through the Toolkit so you get the right code fast.
Ur drivers for Windows are a god send I could not get my ADB to upgrade and flashall.bat was failing so I ran ur driver install with system wide ADB bam worked like a charm thx man
Will I get the regular google updates if my phone is unlocked and rooted?
mskip said:
I have not added Magisk root for the Pixel 2 yet but if anyone wants it I can add it.
Click to expand...
Click to collapse
Yes please add Magisk root.
mskip said:
I have not added Magisk root for the Pixel 2 yet but if anyone wants it I can add it.
Click to expand...
Click to collapse
Yes, I would like to try the Magisk root, and I like being able to do everything with your toolkit.
This doesn't seem to root for me using EMR options on my Pixel 2 (non Verizon). SuperSU is installed, but root checker fails. Did the cleanup as well, but no dice unfortunately.
Hey! On this page Google Pixel 2 is unsupported. Where i can download build with support this device?
I'm skeptical about the accuracy of this. Has anyone successfully rooted their Pixel 2 with this tool?
Won't Root my Project Fi 2XL
Xechorizo said:
This doesn't seem to root for me using EMR options on my Pixel 2 (non Verizon). SuperSU is installed, but root checker fails. Did the cleanup as well, but no dice unfortunately.
Click to expand...
Click to collapse
Nah, it doesn't root my Project Fi 2XL either. It took a couple of tries before it even pushed SuperSU, but even then Root Checker fails.
Galaxy S8 Support?
Trying to flash stock firmware on Pixel 2. Takes about a half hour to download and everything. I end up just getting your device has not been set.
GOOGLE PIXEL 2 XL- SUPPORTS ALL MODELS WITH UNLOCKABLE BOOTLOADER UP TO THE LATEST ANDROID BUILDS.
SEE SUPPORT LIST FOR PUBLIC/PRO VERSIONS *HERE*
NOTE: Verizon models (not sure about ee) have locked the bootloader. In this case you will not be able to toggle the oem unlock setting to unlock the bootloader via the developer screen.
NOTE2: At the moment TWRP is still in alpha testing and lots of things do not work on it such as device decryption, mtp and backup. It's very risky to add this to the toolkit in this state as someone could easily brick their device if they dont know what they are doing so until a more stable version is made custom recovery will not be added.
The Unified Android Toolkit brings together Nexus, Google, Samsung and OnePlus Toolkits and supports many devices. There is also an option at startup to run a Basic Android Toolkit which any Android device can use to install drivers, make app backups, install apk files, reboot the device into different modes and run a command prompt for manual input.
FUNCTIONS OF UNIFIED ANDROID TOOLKIT
* Install correct adb/fastboot drivers automatically
* Backup/Restore a single package or all apps, user data and Internal Storage
* Backup your /data/media (virtual SD Card) to your PC for a Full Safe backup of data
* Root any public build automatically
* SkipRoot boot image to AutoRoot (selected builds)
* Sideload root/unroot files via Custom Recovery
* ALLINONE to Unlock, Flash Recovery, Root, Rename the restore file + install Busybox (G,N,O)
* ALLINONE to Flash Recovery, Root, Rename the recovery restore files + install Busybox (Samsung)
* Unlock/Re-Lock your Bootloader or check status (G,N,O)
* Download Google Stock Image files directly to the ToolKit (G,N,O)
* Check sha256 of google stock image before flashing
* Flash Google Stock Image (G,N,O)
* Flash any part of a stock firmware image to device [boot, system, recovery, etc.] (G,N,O)
* Custom Device Builder can add build support for listed device and add device support for any Samsung device with an unlocked bootloader [included in ULTIMATE, can be added as an extra]
* Download/sideload stock OTA image (G,N,O)
* Install Magisk Root on device [and uninstall if needed]
* Disable dm-verity check
* Install BusyBox binarys on device
* Rename the Recovery Restore File present on Stock Roms (if stock recovery is being restored after flashing custom recovery image)
* Flash Recovery [Stock, CWM, Philz_touch or Twrp Touch]
* Pull /data and /system folders, compress to a .tar file and save to your PC
* Auto Update Toolkit at startup (PRO ONLY)
* Auto Update superuser files to latest versions
* Auto Update Custom Recovery to latest versions [PRO ONLY]
* Disable forced encryption on device if needed
* Install Root Checker app by Burrows Apps
* Install Backup/Restore app by MDroid Apps
* Install EFS/Partition Backup/Restore app by Wanam
* Create tar with 1-Click for flashing via Odin
* Fix extSdCard write permissions in Android 4.4+
* Perform a FULL NANDROID Backup of your system via adb and save in Custom Recovery format on your PC (selected builds)
* Useful Mods, Fixes and Tools Section
* Extras, Tips and Tricks section (includes guides)
* Backup/Restore your /efs partition (gsm only)
* Dump selected Device Partitions, compress to a .zip file with md5 and save to your PC ( on builds with insecure image available)
* Mods section to automatically perform certain tasks on your device
* Boot to any recovery without Flashing it (G,N,O)
* Boot or Flash .img Files directly from your PC
* Quick Picks Professional Feature (10 slots)
* Install a single apk or multiple apk's to your device
* Push Files from your PC to your phone
* Pull Files from your phone to your PC
* Set Files Permissions on your device
* Pull and Trim your Radio Image (gsm models only) to your PC
* Dump selected LogCat buffers to your PC
* Dump BugReport to your PC
* Rip cache.img to zip file in CWM format
* Reboot device to Fastboot Mode or Android in fastboot mode
* Reboot device to Fastboot Mode, Recovery, Android or Download Mode in adb mode
* Turn Initial Start Screen On/Off for next use
* Sideload any zip file via Custom Recovery
* Basic Toolkit for use with ANY Android device
Key: G-Google Pixel, N-Nexus, O-OnePlus, S-Samsung
--------------------------------------------------------------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
--------------------------------------------------------------
SUPPORTED DEVICES AND LATEST SUPPORTED BUILDS *HERE*
DOWNLOAD THE SKIPSOFT UNIFIED ANDROID TOOLKIT *HERE* (FROM SKIPSOFT.NET)
NOTE: Key files are signed with a Digital Certificate from skipsoft.net but some may get picked up as potentially harmful by Antivirus Programs and deleted. They are not harmful, this is a false positive given because of the compiler used. If this happens restore the file and exclude the folder from future scans to use it. This seems to happen mostly on AVG Free and Norton. If you are using the Auto Update feature on pro versions then you will need to disable the AV program or exclude the folder from scans before running the update again.
Credits: ChainsDD for Superuser, Chainfire for SuperSU and kernel patches, koush and the clockworkmod team for cwm and the universal driver pack, 1wayjonny for the adb/fastboot driver pack, Adam Lange for all his support and help with the insecure kernels, Viperboy for the Knox Disabler app, Stephen Erickson for the BusyBox installer app, BurrowsApps for the Root Checker app, NextApp for the SD Fix app, fOmey for TWRP for the Galaxy Gear.
--------------------------------------------------------------
WHAT IS THE DIFFERENCE BETWEEN PUBLIC, PROFESSIONAL AND ULTIMATE VERSIONS?
THE PUBLIC VERSION OF THE TOOLKIT INCLUDES EVERYTHING YOU COULD NEED TO MANIPULATE AND ROOT YOUR DEVICE.
ACTIVATING THE PROFESSIONAL VERSION ADDS THE MOST USEFUL FUNCTION IN THE TOOLKIT, THE ABILITY TO CHECK FOR AUTO UPDATES DIRECTLY VIA THE TOOLKIT AND HAVE THEM PUSHED TO YOUR PC RIGHT AWAY AS SOON AS THEY ARE UPLOADED WITHOUT NEEDING TO DOWNLOAD THE WHOLE TOOLKIT EVERY TIME. YOU WILL ALWAYS HAVE THE LATEST VERSION AS SOON AS IT IS MADE AVAILABLE. THIS MEANS SMALLER UPDATES CAN BE SENT OUT MORE FREQUENTLY, SUCH AS ADDING A SINGLE FUNCTION, FIXING A BUG OR ADDING COMPATIBILITY FOR A SINGLE CARRIER. THE SMALLER UPDATES WILL BE COMPILED AND RELEASED TO THE XDA COMMUNITY AS A FULL (PUBLIC) DOWNLOAD VERSION SO PROFESSIONAL VERSIONS ARE ALWAYS UPDATED SOONER.
THE PRO VERSION ALSO ADDS THE ABILITY TO CHECK FOR THE LATEST VERSION OF CUSTOM RECOVERY FILES AND DOWNLOAD THEM DIRECTLY TO THE TOOLKIT.
THE QUICK PICKS SECTION ALLOWS YOU TO PROGRAM UP TO 10 SLOTS WITH TASKS THAT YOU MAY PERFORM ON A REGULAR BASIS OR JUST WANT TO KEEP A SET OF TASKS IN 1 PLACE. THEN JUST SELECT THE SLOT AND IT WILL REMEMBER ALL YOUR SETTINGS FOR THAT TASK AND RUN IT.
PRO USERS CAN ALSO SELECT THE ANY BUILD OPTION IN THE BUILD SELECTION SCREEN TO ROOT ANY BUILD AS LONG AS THE VERSION IS SUPPORTED (USEFUL IF YOUR BUILD IS NOT LISTED).
THE ULTIMATE MODE ALLOWS YOU TO ACTIVATE THE PRO MODE ON EVERY DEVICE MODULE THE TOOLKIT SUPPORTS. NO MORE NEED TO BUY A NEW PRO CODE EVERY TIME YOU BUY A NEW DEVICE. THE ULTIMATE MODE ALSO INCLUDES THE NEW CUSTOM BUILDER MODE WHICH LETS YOU ADD SUPPORT FOR NEW BUILDS EVEN BEFORE THE TOOLKIT CAN ADD IT. CUSTOM BUILDER MODE CAN ALSO ADD SUPPORT FOR SAMSUNG DEVICES THAT HAVEN'T YET BEEN ADDED TO THE TOOLKIT.
MORE IMPORTANTLY DONATING SHOWS YOUR APPRECIATION AND ALLOWS THE TOOLKIT TO CONTINUE TO EVOLVE AND GROW. WITHOUT YOUR SUPPORT THE TOOLKIT CANNOT EXIST.
AUTO REPLY LINKS FOR PAYPAL TO GET A CODE INSTANTLY CAN BE FOUND AT http://goo.gl/nyGqv
--------------------------------------------------------------
PLEASE READ THE *HELP* PAGE AT http://www.skipsoft.net/?page_id=1269 OR USE THE INFORMATION SECTION WITHIN THE TOOLKIT IF YOU HAVE ANY QUESTIONS. I HAVE TAKEN A LOT OF TIME TO WRITE IT AND SOMETHING ON THERE SHOULD ANSWER 99% OF PROBLEMS.
--------------------------------------------------------------
1. INSTALLING ADB/FASTBOOT DRIVERS
The first thing you need to do is to install the adb/fastboot drivers. These are needed so that you can unlock your bootloader, root your device and perform other adb/fastboot functions.
THE DRIVERS CAN BE INSTALLED DIRECTLY VIA THE TOOLKIT. OPTION 1 IN THE MAIN MENU.
If drivers are not installed or there is an exclamation mark next to the device:
Plug the device in to a usb cable directly connected to your motherboard.
In the Device Manager a new item, usually called Android 1.0 should pop up in the list.
Right click on the device item then left click on Update Driver Software. Select 'browse my computer' and then 'Let me pick from a list'.
If no adb interface driver appears in the list then untick 'Show compatible hardware' and find the Android or Samsung adb interface driver.
If you cannot find either of these click Have Disk, browse to the Toolkit install folder, drivers folder, click on android_winusb.inf and click Open.
Click OK and select Google ADB Interface.
Make sure you have USB debugging enabled in settings, developer options. In Android 4.2.2 or later you have to enable the developer options screen by going to settings, About on your device and click on Build number at the bottom 7 times until it says You are now a developer. If you have already enabled usb debugging then unplug/replug the usb cable.
On Android 4.2.2 or later when you replug the usb cable after enabling usb debugging for the first time you will get a popup asking you to authenticate your pc. Tick 'Always allow' then click 'ok'.
Newer devices also require you to enable OEM Unlocking in the developer section to allow the bootloader to be unlocked. Tap Developer options and enable OEM unlocking and USB debugging. (If OEM unlocking is disabled, connect to the Internet so the device can check in at least once. If it remains disabled, your device may be SIM locked by your carrier and the bootloader cannot be unlocked.)
--------------------------------------------------------------
2. USING SKIPSOFT UNIFIED ANDROID TOOLKIT
When starting the Toolkit you will first be asked which device you want to work with. Working folders will be created and the device files downloaded. You will then be taken to the Model/Build selection screen where you can do a number of things (other than select your model/build): Type '00' to enter your activation code and enable pro features if you have one, 'dr' will allow you to install drivers, 'i' will take you to the Information and Help Section, 'a' will give you information on how to add support for a new build.
Supported builds are listed in the Model/Build selection screen and typing the associated number (i.e. 11) will download needed boot and recovery files (stock and custom recovery) then check for and download the latest superuser files available and custom recovery (pro versions only), verify all the files and start the Main Menu. You can now use all the functions and tools the Android Toolkit offers. Pro users can select the "any build" option to root any build (useful if your build is not listed).
--------------------------------------------------------------
USEFUL INFORMATION
How to get into your FastBoot Mode
1. Turn your phone off
2. Unplug your usb cable if you have one plugged in
3. Keep holding the 'Volume Down' and 'Power' buttons to boot the phone into FastBoot Mode
How to get into Recovery
1. First boot into FastBoot Mode as described above
2. Scroll down with the 'Volume Down' button until it says 'Recovery mode' at the top and press the 'Power' button to enter Recovery
Show the Menu in the Stock Recovery Screen
1. Hold the Power button and keep holding as you press the Volume Up button quickly. The blue recovery menu screen should pop up.
--------------------------------------------------------------
*DISCLAIMER*
I take no responsibility for any fault or damage caused by using the Unified Android Toolkit. No warranties of any kind are given.
** FAQ **
** reserved if needed **
@mskip
Looks like quite a lot that can help out new users that have never used a Nexus/pixel device. Am I right in assuming that all "Nexus" functions will work for pixel devices aside from what is still a wip on this device? Such as easier downloading of the newest stock image, or just what is stated will work with the xl 2, which from what I can see is just disabling force encryption?
Either way, looks like a ton of work has gone into this. Nice job
Lawlrus said:
@mskip
Looks like quite a lot that can help out new users that have never used a Nexus/pixel device. Am I right in assuming that all "Nexus" functions will work for pixel devices aside from what is still a wip on this device? Such as easier downloading of the newest stock image, or just what is stated will work with the xl 2, which from what I can see is just disabling force encryption?
Either way, looks like a ton of work has gone into this. Nice job
Click to expand...
Click to collapse
Everything that is listed to work on Nexus devices will also works on Pixel devices including unlocking bootloader and downloading/flashing stock images. I have just added support for the new google images added this morning although im a bit confused why google release images for verizon devices when the bootloader cannot be unlocked and the images cannot be flashed.
I have also just added the critical partitions unlock procedure for the Pixel 2 XL. Latest version is 1.0.2 but I will post a message in a few minutes on how to update using AutoUpdate or ToolKitClean.
@mskip
Sounds good, thanks for the explanation
Thanks. Went ultimate. I'll try rooting next. Keep up the good work!
wtherrell said:
Thanks. Went ultimate. I'll try rooting next. Keep up the good work!
Click to expand...
Click to collapse
Please let me know what works and what doesn't so things can be fixed if needed.
UPDATE FOR GOOGLE PIXEL 2 XL DEVICE FOR ALL USERS (PRO AND PUBLIC)
Changelog [Google Pixel 2 XL] v1.0.2:
+Added FULL Support for Android 8.0.0 OPD1.170816.025, Nov 2017, EMR
+Added FULL Support for Android 8.0.0 OPD3.170816.023, Nov 2017, Verizon EMR
+Added above STOCK and OTA images to download/flash directly from Toolkit using option 9,1 [firmware download/flash] or 10,1 [ota download/sideload]
+Added new critical-partitions unlock command to bootloader unlock procedure for full unlock
Pro users can just start the Toolkit as normal. After you have selected your device you will be notified there is an update available and can auto update. SIMPLE.
Non Pro users have a few extra steps.
1. Exit the Toolkit if it is open.
2. Run ToolkitClean.exe from the intallation folder (or the Start Menu)
3. Select the device from the list
4. Type ‘y’ or ‘yes’ (without the quotes) to delete the existing module files and settings for the device
5. Select option 63 to update to the latest md5 firmware check file (if you are downloading new firmware)
6. Restart the Toolkit, select the device and new module files will be downloaded/installed
If you want to donate to the device module project or purchase an Ultimate Code to unlock all devices/features please do it through the Toolkit so you get the right code fast.
I was waiting for this. Probably want to redo all of my partitions, both A and B, at some point.
I am unable to boot to anything but the bootloader. Every attempt to use this to re-flash stock 8.0, it fails. It shows that my device is not set and returns to the main menu. Am I missing something??
chadhoard said:
I am unable to boot to anything but the bootloader. Every attempt to use this to re-flash stock 8.0, it fails. It shows that my device is not set and returns to the main menu. Am I missing something??
Click to expand...
Click to collapse
Had similar issues until I updated Android Tools.
They've just been updated for Pixel 2's. The older versions and 'Minimal' ADB packs do not work on Pixel 2's.
michaelbsheldon said:
Had similar issues until I updated Android Tools.
They've just been updated for Pixel 2's. The older versions and 'Minimal' ADB packs do not work on Pixel 2's.
Click to expand...
Click to collapse
Where and how do I install the most current? Also, I have the Pixel 2 XL, if that matters.
chadhoard said:
Where and how do I install the most current? Also, I have the Pixel 2 XL, if that matters.
Click to expand...
Click to collapse
This'll do it:
https://developer.android.com/studio/index.html
michaelbsheldon said:
This'll do it:
https://developer.android.com/studio...orm-tools.htm
Click to expand...
Click to collapse
Comes up with page not found.
chadhoard said:
Comes up with page not found.
Click to expand...
Click to collapse
Try new link for it: https://developer.android.com/studio/index.html
michaelbsheldon said:
Try new link for it: https://developer.android.com/studio/index.html
Click to expand...
Click to collapse
So just install this and then run SkipSoft ToolKit?
thanks for the great tools. I got the Ultimate version
chadhoard said:
I am unable to boot to anything but the bootloader. Every attempt to use this to re-flash stock 8.0, it fails. It shows that my device is not set and returns to the main menu. Am I missing something??
Click to expand...
Click to collapse
I had the same problem. I am updating the android studio as recommended (thank you @michaelbsheldon) as we speak and I'll try and report back.
So I just download the android studio from the site and don't run it correct? All should be good once it is installed?
Amazing continued work by @mskip by the way! Awesome tool! I have been using it for 4 phones now.
JDROIDS said:
I had the same problem. I am updating the android studio as recommended (thank you @michaelbsheldon) as we speak and I'll try and report back.
So I just download the android studio from the site and don't run it correct? All should be good once it is installed?
Amazing continued work by @mskip by the way! Awesome tool! I have been using it for 4 phones now.
Click to expand...
Click to collapse
I had a couple of issues while installing. However, I was able to get it to install. After rebooting my PC, I still can not get it to flash stock.