Hi,
I know this sounds stupid, but how can I get the watch's orientation to change? I wear watches on my right wrist and I can't get the watch to change orientation. I usually like to wear watches with the buttons away from my elbow. Help?
I second that- I also wear my watches on my right hand (they clash with my wedding band)
This seems like something that could be easily implemented... if there isn't a method now, maybe you could start emailing the developers of the moto connect app to add this ability.
Well for right now, I think it's just like any other real watch where if you put it on your right arm, the button will face your elbow. It does sound like an easy software change, though.
Related
Hello,
is there a way i can disable the screen to turn on with the wrist move ?
This auto screen power on , on wrist move is killing my battery, especially when i'm driving.
I want to switch on the screen only on tapping the screen.
Thanks a lot
I'm pretty sure there's not... yet. The O/S is pretty immature though. I'll bet that before long there will be apps or mods that will allow such basic O/S customization.
jt3 said:
I'm pretty sure there's not... yet. The O/S is pretty immature though. I'll bet that before long there will be apps or mods that will allow such basic O/S customization.
Click to expand...
Click to collapse
I suppose there is not a way to disable the heart meter , pedometer or see what app run on the background and disable it ?
I found the way to disable these. Look in the 360 development forum.
If you find the package that listens for wrist motion, I can take a look at disabling the component that turns it on.
I got a little more info about this last night when I did a logcat on the watch. I'm going to speak with someone more knowledgeable to see what we can do with that info.
You should watch the mods post in the 360 development forum for more info.
A easy solution is the Theater mode.
You can access this setting by swiping down, and once to the left. Now you have to press the button to wake your smartwatch.
The only disadvantage is that your watch is not vibrating anymore when getting new messages.
I hope this will help you.
Isn't this controlled by "Tilt to wake screen". You have to access through the phone.
stevenlong said:
Isn't this controlled by "Tilt to wake screen". You have to access through the phone.
Click to expand...
Click to collapse
I'm not 100% sure, since I've had my 360 for less than a week... But seeing the date of this question about tilt to wake was from the end of last year.. It could ha e been implemented since then. You can disable it in the settings from the Android Wear app on you're Android phone.
Go to settings there is an option to turn it off......
I love this phablet. Came from lg g3 and I have to say I love the Note 4 little more.
But there are a few things that I don't like. I hate actually.
1. The bottom of the phone, non-screen area. Space is small vertically and I constantly launch an app on the dock when trying to press the home button. Especially when using the phone one handed. Samsung could have moved the screen up put the logo on the bottom to make the space larger. This is a QA usability fail.
2. Fingerprint sensor limit to 3. While I was able to program 6 fingers, it doesn't always work well and needs multiple swipes. I also would like to see apple like sensor that doest need swiping.
3. IR remote software is terrible. Just give me a programmable remote like LG G3.
4. Front camera distortion. With wide screen format the distortion is so bad at top and bottom I can't believe it made it pass the QA..
While I can't really say much about points 1, 2, and 4 I can say there's this really nice remote app in the play store "Smart IR Remote - AnyMote" by Color Tiger that works really well though I think it's a paid app.
Point 1: I have never launched anything while pressing the home button. I even have a case on which reduces my flat usable space to push it. This is not a "QA fail", it's your personal preferance.
Point 2: I use my thumb which I scanned in twice holding the phone 2 different ways to compensate for different usage scenarios and I get it the first time 95% of the time.
Point 3: I agree that the IR software could be better, but I think it is better than HTC's. The software on my One M8 wouldn't work with my DVD player. With the Note 4 the setup was faster and it works with my TV and DVD player.
Point 4: I honestly haven't used the front camera, so I can't say much on it. I will check it out since you mentioned it though.
I agree on all points except #4 because I NEVER use it, but number 1 happens to me often. Maybe I just have big thumbs, but I am constantly launching something or hitting something when I press the home button. Best phone available IMO, but everything can't be perfect for me.
Number 1 used to happen to me all the time. I Just moved the icon from above the home button. Problem solved!
Sent from my SAMSUNG-SM-N910A using XDA Free mobile app
Press with the edge of your thumb and I bet it won't be a problem anymore. That's how I do it.
Try pie controls and set one of the first row as your home button... I never even press the home button anymore. Saves a little wear and tear over time as well.
some launchers allow for adding vertical padding, i don't know if it applies to the dock area but it's worth a shot if you're not set on using samsung's launcher. personally i have more issues hitting icons or long pressing by accidentally touching the sides of the screen when gripping the phone vs hitting something while trying to press home. but that could just be because we hold the phone in different ways maybe.
i have pretty good luck with the fingerprint sensor so long as my fingers aren't grimy or sweaty. but i found it to be generally a worse setup than the iphone (which works surprisingly well and fast) i turned it off after about a week. if it wasn't a swiping gesture i probably would have left it on as i found it awkward to swipe my thumb while trying to hold the phone.
3 and 4 i don't really use so i can't comment. i tried out the IR and it worked fine with my projector. i'll take a look at the FFC and see if i get any distortion.
Up
insang-droid said:
I love this phablet. Came from lg g3 and I have to say I love the Note 4 little more.
But there are a few things that I don't like. I hate actually.
1. The bottom of the phone, non-screen area. Space is small vertically and I constantly launch an app on the dock when trying to press the home button. Especially when using the phone one handed. Samsung could have moved the screen up put the logo on the bottom to make the space larger. This is a QA usability fail.
2. Fingerprint sensor limit to 3. While I was able to program 6 fingers, it doesn't always work well and needs multiple swipes. I also would like to see apple like sensor that doest need swiping.
3. IR remote software is terrible. Just give me a programmable remote like LG G3.
4. Front camera distortion. With wide screen format the distortion is so bad at top and bottom I can't believe it made it pass the QA..
Click to expand...
Click to collapse
I cna very agree with 2), I love apple's implementation of the finger print scanner. I hope we see future phones utilize the same way rather than require swipes.
3. is very solvable by using a programmable remote on the app store (smart remote IR+) which is VERY nice.
The rest I do not really have any experience or trouble with but we all use our phones differently.
I bought a remote app. But I feel like I shouldn't have to buy another app with a phone like note 4.
I'll try the home software button on dock.
Anyone know how to get the screen back that I saw at set up about how long the vibration would go for? Also, Is there a way to increase intensity on this watch?
vvveith said:
Anyone know how to get the screen back that I saw at set up about how long the vibration would go for? Also, Is there a way to increase intensity on this watch?
Click to expand...
Click to collapse
Download the app, 'Feel the Wear' by Martin Florek. Allows you to customize your vibrations.
As for intensity. Not possible to alter. That is a hardware fix. But with the app, you can make the vibration last longer than normal, making it more obvious when a notification comes in.
Does anyone find that the vibration is noisy?
I don't know if this is my unit but when it vibrates in a silent room it's audible from a few meters. Vibration strengh is definitely weaker than my 1st gen moto 360.
If it's my unit, I'll ask for a replacement coz I barely feel the vibration.
Paninno12 said:
Does anyone find that the vibration is noisy?
I don't know if this is my unit but when it vibrates in a silent room it's audible from a few meters. Vibration strengh is definitely weaker than my 1st gen moto 360.
If it's my unit, I'll ask for a replacement coz I barely feel the vibration.
Click to expand...
Click to collapse
It's like that for everyone. I have the mesh band which helps since it is metal and can be worn tighter than the link band.
Thanks. IMO the first purpose of a smartwatch is to make sure you get notifications. Therefore I decided to send it back as it was a deal breaker for me. Too bad...really liked the design (black stainless steel )
Vibrator is VERY noisy, I was surprised.
thanks all.
vvveith said:
Anyone know how to get the screen back that I saw at set up about how long the vibration would go for? Also, Is there a way to increase intensity on this watch?
Click to expand...
Click to collapse
I tried that feel the wear and it tears through battery, but after wearing a watch, which I have not done since mobile became a thing, I find I look at the watch often enough to catch anything I did not feel so I'm good. It's so nice to only pull my phone out to pay for things, now I wait until my phone replaces my keys and eventually the watch can do all that the phone can, pay for things and unlock doors and start cars.
It seems that "Feel The Wear" doesn't show the notification card, it only vibrates. Does anybody have it work with the card popping-up at the same time as the vibration? Or anybody had the same problem and got a solution?
Axello
I have very weak vibrations too, and it is very annoying.
The purpose of the watch is to notify me of appointments, emails and calls.
"Feel the Wear" ..... I am not sure what it does if anything.
If does not have very good documentation.
Change the pattern, length of vibrations how ??? "Feel the Wear" does not say.
There is a list of 100 or so applications .... I am supposed to manually edit them and which ones.
..
Covart said:
Download the app, 'Feel the Wear' by Martin Florek. Allows you to customize your vibrations.
As for intensity. Not possible to alter. That is a hardware fix. But with the app, you can make the vibration last longer than normal, making it more obvious when a notification comes in.
Click to expand...
Click to collapse
Thanks for the tip !!
Why is the vibration so loud lol. I just got the watch yesterday. I wore it to work today and I got three notifications at once and it was way too loud in a silent room. Kinda embarrassing loud. I love this watch but hate the vibrate. I see people have asked this question but I didn't see a solid answer besides rooting it and installing a custom kernel. Is there a way to turn off all vibrations for the watch on a global level? I can live without vibrations but I need notifications.
i dont know what happened. since the update to 1.5, sothing strange is hapening to watch. suddenly begins to to vibrate then stop, the begin again without any reason. dont know if it´s a watch problem, firmware problem... it´s not a constant vibration.. i can not explain exactly. Anyone can help me ? regards
miruim said:
i dont know what happened. since the update to 1.5, sothing strange is hapening to watch. suddenly begins to to vibrate then stop, the begin again without any reason. dont know if it´s a watch problem, firmware problem... it´s not a constant vibration.. i can not explain exactly. Anyone can help me ? regards
Click to expand...
Click to collapse
I had that issue since unboxing on July 17th, but not since a factory reset because I unpaired my phone within the watch's settings. I did not connect it to Bluetooth only through android wear and it's working great. I guess I can't make calls but I don't mind. It's working great now.
Sent from my SM-N910V using Tapatalk
I have another type of issue. From time to time watch stops vibrating at all and start vibrating again without a reason. I cannot see any behavior pattern in it, but they don't vibrate even in process of loading after reboot. Is it hardware problem? I've tried "Feel the wear" app - no effect, watch just not vibrate when I press "try" button.
update: It starts work after I hardly shake my wrist and work for a hour or two.
I have had my watch less than a week. I have watchmaker installed, have downloaded a mickey mouse watchface, and edited it to add features and hot spots to open apps. When left for a long period it changes the face to a plain digital or blank face. Not sure if it is related to receiving notifications or what the trigger is.
Anyone have this happen or any idea what is going on?
Happened to me also only on watchmaker - I'm still trying to figure out what causes it...
I'm on AW 2.0 and was used to waking the watch with a gesture and would just swipe to get to the apps list. Is there a way to still do that? Or is waking the watch and pressing the crown the only way? Thanks
Try using a different launcher, but for what was published that is the default of AW2.0
I have always used the wrist gestures facility and find it very convenient, particularly as I don't want to smudge and spoil my beautiful Huawei Watch screen. I was therefore glad to find that in AW 2.0 the whole wrist gesture process works much smoother and quicker.
Whilst I was aware that, when within an app or reading a message, three shakes of the wrist returns the main watch face, I was very pleased to discover today (by accident) that I can now call up the new apps wheel screen with the same three wrist-shake motion, i.e. without swiping the watch face or pressing the crown. Pretty neat. I have had my Huawei Watch since it first came out. Can't stop loving it.