Related
HI guys, I need help from some caritative soul please!! I'm desperate.
Some of you might have already read about my case: I rushed, last weekend, to flash one of the beta Lollipop versions that hanged around (v19h); I only flashed bootloader and rom.
Now, my phone does not boot to LAF (download mode), nor recovery (TWRP) anymore, because of those not being signature-compatible with new bootloader.
And, since I am obviously not rooted, I am stuck to this version, unable to get out: I can't flash KDZ, or flashable zip on recovery.
Today, I have tried literally EVERYTHING suggested on XDA.. with no luck....
I am basically stuck with a extremely expensive paperweight... any ideas to help me?
RIght now, my only choice is to return it to insurance/warranty, but... what could I possibly say? .. They might laugh at me when they see the Android 5.0 version screen....
Any kind of ideas will be extremely appreciated... Thanks!
Attempts I already tried without luck:
* Flash new/old KDZ or TOT with Flashtool
* Flash new/old KDZ or TOT with Flashtool 2014
* Any ADB attempt
* Any fastboot attempt
* The dreaded RED 2? ...
*[FIX] Unbrick LG G3 stuck in Qualcomm HS-USB QDLoader 9008 mode
rodrigofd said:
HI guys, I need help from some caritative soul please!! I'm desperate.
Some of you might have already read about my case: I rushed, last weekend, to flash one of the beta Lollipop versions that hanged around (v19h); I only flashed bootloader and rom.
Now, my phone does not boot to LAF (download mode), nor recovery (TWRP) anymore, because of those not being signature-compatible with new bootloader.
And, since I am obviously not rooted, I am stuck to this version, unable to get out: I can't flash KDZ, or flashable zip on recovery.
Today, I have tried literally EVERYTHING suggested on XDA.. with no luck....
I am basically stuck with a extremely expensive paperweight... any ideas to help me?
RIght now, my only choice is to return it to insurance/warranty, but... what could I possibly say? .. They might laugh at me when they see the Android 5.0 version screen....
Any kind of ideas will be extremely appreciated... Thanks!
Attempts I already tried without luck:
* Flash new/old KDZ or TOT with Flashtool
* Flash new/old KDZ or TOT with Flashtool 2014
* Any ADB attempt
* Any fastboot attempt
* The dreaded RED 2? ...
*[FIX] Unbrick LG G3 stuck in Qualcomm HS-USB QDLoader 9008 mode
Click to expand...
Click to collapse
The best advice I can give to you is that if no solutions become available to you, depending on the warranty, I would water damage the phone so the warranty does not reject your claim. Otherwise you may have to play the waiting game until developers create a solution.
bonkieash said:
The best advice I can give to you is that if no solutions become available to you, depending on the warranty, I would water damage the phone so the warranty does not reject your claim. Otherwise you may have to play the waiting game until developers create a solution.
Click to expand...
Click to collapse
Are G3 phone OEM warrantied for water damage?
Water-damaging the phone is a risky way to go. I was under the impression that water-damage is not covered, especially since most phones even have a moisture-indicator strip on the motherboard for detecting it. Even if it was covered, what if they do reject warranty due to any reason(including software tampering?). You'll actually end up with an expensive brick then. Atleast now you have a working(albeit buggy) phone.
I'll suggest to wait till the devs can find some way to help you. Was going to suggest you try the Qualcomm HS-USB QDLoader 9008 mode method but it looks like you've already tried that.
Hi, I have the exactly same problem. But after some digging i found this thread : http://forum.xda-developers.com/showthread.php?t=2660566 and http://forum.xda-developers.com/showthread.php?t=2345860
I think that is a long shot, but if somebody provide "debrick image" - (following istructions from the top of the thread) from their D855 devices with lollipop firmware (19h or 20A) it can be worth a try.
Sorry for my english.
bonkieash said:
The best advice I can give to you is that if no solutions become available to you, depending on the warranty, I would water damage the phone so the warranty does not reject your claim. Otherwise you may have to play the waiting game until developers create a solution.
Click to expand...
Click to collapse
LG would not warrantied the phone if its waterproof. They specifically asked you if you crack your screen or has been water damaged. If you do, you either pay a hefty price ($150) or they can refuse to fix it.
jayro28 said:
Click to expand...
Click to collapse
OMG. I'm in the same boat. Do you know where I can get this tool? I would really appreciate!
ifscher said:
OMG. I'm in the same boat. Do you know where I can get this tool? I would really appreciate!
Click to expand...
Click to collapse
Link in PM
jayro28 said:
Link in PM
Click to expand...
Click to collapse
Many thanks! I believe my phone passed the test. It still recognizes my phone as QHSUSB and it doesn't power up, enter recovery nor boot anything.
Do you have any tip to what to do?
jayro28 said:
Link in PM
Click to expand...
Click to collapse
jayro, where i can find the lg smart boot app? can you help me, sorry for my bad english, thank you
jayro28 said:
Link in PM
Click to expand...
Click to collapse
i need that program too please can you giveme a link too thanks in advance.
jayro28 said:
Link in PM
Click to expand...
Click to collapse
hi master plase share with me this tool .
i have g3 qualcomm mode now brick
rodrigofd said:
HI guys, I need help from some caritative soul please!! I'm desperate.
Some of you might have already read about my case: I rushed, last weekend, to flash one of the beta Lollipop versions that hanged around (v19h); I only flashed bootloader and rom.
Now, my phone does not boot to LAF (download mode), nor recovery (TWRP) anymore, because of those not being signature-compatible with new bootloader.
And, since I am obviously not rooted, I am stuck to this version, unable to get out: I can't flash KDZ, or flashable zip on recovery.
Today, I have tried literally EVERYTHING suggested on XDA.. with no luck....
I am basically stuck with a extremely expensive paperweight... any ideas to help me?
RIght now, my only choice is to return it to insurance/warranty, but... what could I possibly say? .. They might laugh at me when they see the Android 5.0 version screen....
Any kind of ideas will be extremely appreciated... Thanks!
Attempts I already tried without luck:
* Flash new/old KDZ or TOT with Flashtool
* Flash new/old KDZ or TOT with Flashtool 2014
* Any ADB attempt
* Any fastboot attempt
* The dreaded RED 2? ...
*[FIX] Unbrick LG G3 stuck in Qualcomm HS-USB QDLoader 9008 mode
Click to expand...
Click to collapse
Try this
http://forum.xda-developers.com/showthread.php?t=2582142
It might work for your situation
hi guys, flashed the rom stock bumped v20i, I received an error in flash with wipe, I rebooted into recovery but does not go. i lost recovery and download mode (volume up and connected usb to pc does not turn on the device).
any solutions?
Same here, any on f460k korean version =/.
I am getting stuck oin bootloop so had to downgrade. Why can't you get to recovery with battery pull and volume down?
always boot certification security, on download mode and recovery =/ even when connect the usb cable.
http://www.usoftsmartphone.com/t269796.html
Can work?
danielg90 said:
hi guys, flashed the rom stock bumped v20i, I received an error in flash with wipe, I rebooted into recovery but does not go. i lost recovery and download mode (volume up and connected usb to pc does not turn on the device).
any solutions?
Click to expand...
Click to collapse
sambrooke said:
I am getting stuck oin bootloop so had to downgrade. Why can't you get to recovery with battery pull and volume down?
Click to expand...
Click to collapse
danielg90 said:
http://www.usoftsmartphone.com/t269796.html
Can work?
Click to expand...
Click to collapse
Can't get in fastboot mode =(.. i read this http://forum.xda-developers.com/lg-g3/general/fix-unbrick-lg-g3-stuck-qualcomm-hs-usb-t2933853 but cant find the COM port only the unknow device.
i folllowed http://forum.xda-developers.com/lg-g3/general/fix-unbrick-lg-g3-stuck-qualcomm-hs-usb-t2933853 and this is the result http://goo.gl/8FSTNp
i gonna try this http://forum.xda-developers.com/showthread.php?t=2582142 , if result i tell u, did u see the com port in your drive? i don't have drive for offline phone on f460 model.
Sorry this isn't helping you guys but..
I'm really afraid of this happening with my device. That's why I still love my Galaxy s4. Never heard of this on galaxy s4.
I really hope you guys figure out the problem. Good luck!
GG.... i got my phone bricked can't find a way to weak up it again :'(
mafury said:
i gonna try this http://forum.xda-developers.com/showthread.php?t=2582142 , if result i tell u, did u see the com port in your drive? i don't have drive for offline phone on f460 model.
Click to expand...
Click to collapse
Link for file g3?
Those files can be extracted from KDZ 5.0 with the kdz extractor tool. This solution don't work for me u.u' can't find qualcom 805 driver...
when i connect phone https://www.dropbox.com/s/uc1yy49a9iyp2t1/Cattura.JPG?dl=0
QHS
danielg90 said:
i folllowed http://forum.xda-developers.com/lg-g3/general/fix-unbrick-lg-g3-stuck-qualcomm-hs-usb-t2933853 and this is the result http://goo.gl/8FSTNp
Click to expand...
Click to collapse
Is your phone in Qualcomm QHSUSB__BULK mode?
If yes I recently got this problem on my D855 after getting an OTA update, it hardbricked, it will need to be boot repaired, the owner of the board diagnostics software is in the thread you got your software from, he restricted his software so that it will give the said error.
He charges 50 USD for repairing boot, I returned my phone to the seller, you should try the software in offline mode, i-e disconnect from the internet before launching the application, if it works then tell us, if not then probably the best option will be to ask the owner of this software for access.
ScAvEnGeR(PHC) said:
Is your phone in Qualcomm QHSUSB__BULK mode?
If yes I recently got this problem on my D855 after getting an OTA update, it hardbricked, it will need to be boot repaired, the owner of the board diagnostics software is in the thread you got your software from, he restricted his software so that it will give the said error.
He charges 50 USD for repairing boot, I returned my phone to the seller, you should try the software in offline mode, i-e disconnect from the internet before launching the application, if it works then tell us, if not then probably the best option will be to ask the owner of this software for access.
Click to expand...
Click to collapse
my device isn't in Qualcomm QHSUSB__BULK mode, is in https://www.dropbox.com/s/uc1yy49a9iyp2t1/Cattura.JPG?dl=0
Good
danielg90 said:
my device isn't in Qualcomm QHSUSB__BULK mode, is in https://www.dropbox.com/s/uc1yy49a9iyp2t1/Cattura.JPG?dl=0
Click to expand...
Click to collapse
Its a good sign, use the LG flash tool, use the TOT method not the KDZ one...
Good Luck...
ScAvEnGeR(PHC) said:
Its a good sign, use the LG flash tool, use the TOT method not the KDZ one...
Good Luck...
Click to expand...
Click to collapse
Any luck with this as im in a similar pickle.
quintaar said:
Any luck with this as im in a similar pickle.
Click to expand...
Click to collapse
What is being displayed in the device manager after installing drivers?
ScAvEnGeR(PHC) said:
Its a good sign, use the LG flash tool, use the TOT method not the KDZ one...
Good Luck...
Click to expand...
Click to collapse
i try lg flash tool method but devide is not detected
ScAvEnGeR(PHC) said:
What is being displayed in the device manager after installing drivers?
Click to expand...
Click to collapse
The com port as in my thread just wanted to check in this post if anyone has any updates too as this one sounds very similar
my phone bricked and computer recognize "QHSUSB_BULK".
I use QPST to flash boot for it but no have mpgr and mbn for chip msm8992.
please yous have share for me thanks. sorry my english
Please anyone give us the solution please help some one repair this via usb cable so there was a solution!!!
But how please can anyone help us
Br
Shahzaib Jahangir
darkdevil15101992 said:
my phone bricked and computer recognize "QHSUSB_BULK".
I use QPST to flash boot for it but no have mpgr and mbn for chip msm8992.
please yous have share for me thanks. sorry my english
Click to expand...
Click to collapse
I know on g3 this was considered hard brick had to use wilcrack to reflash bootloader partitions cause the primary gtp is now corrupted for what ever reason g2 and g3 are unbrickable beacause of this i do know u need the tot of the firmware u bricked on have to extract 4 or 5 partitions from said tot. Then flash them to ure phone
Search for g3 hard brick and it can give u a idea just ddont know how compatible it is yet ive done it on g2 and g3 im new to g4
http://forum.xda-developers.com/showthread.php?t=2582142
Ok but on willcracket there was 2nd loader.hex file which was only for msm8974 and 8974AC and our g4 is msm8992 and msm8994
So we badly need msm8992.hex file and rawprogram.xml
And as I see there is some mbn files also sbl1.mbn,sbl1 signed.mbn and more
We need those files for msm8992 please can anyone give us those files so we try it
Br
Shahzaib Jahangir
I got the same problem, my device stops during upgrade and bootloader freeze, I can't enter in download mode, e don't clean in a recovery.
Sometimes it's back, but my win7 64 don't recognize him, few a minutes display off and pc recognized like as qhsusb_bulk!
Night vampire said:
I got the same problem, my device stops during upgrade and bootloader freeze, I can't enter in download mode, e don't clean in a recovery.
Sometimes it's back, but my win7 64 don't recognize him, few a minutes display off and pc recognized like as qhsusb_bulk!
Click to expand...
Click to collapse
Hi, do you have a solution?
manuel1496 said:
Hi, do you have a solution?
Click to expand...
Click to collapse
Bro try board diag
bilawal.sarfraz.1 said:
Bro try board diag
Click to expand...
Click to collapse
What's that?
manuel1496 said:
What's that?
Click to expand...
Click to collapse
Bro tell me first that what your pc is show:
1) QHS_USB BULK 9006.
2) QHS_USB BULK 9008.
TELL ME THAT WHICH TYPE OF DEVICE IS SHOWB IN YOUR PCS DEVICE MANAGER WHEN YOU CONNECT YOUR PHONE WITH PC.
Hi,
I got a G4 H815 from a friend. He tried to install a custom firmware and killed the G4.
I see the G4 in the device manager as a qualcomm HS-USB QDloader 9008, but nothing more.
With the LGFlash Tool: It will transfer the files, but after 8 seconds it fails caus of missing download mode.
With LGUP, after I changed the driver to an LG USB COM Port, it connected but at Model: Unknown model. And stopped
I think, I have to install first a bootloader on the device, but how?
Someone can help pls?
midwayhero said:
Hi,
I got a G4 H815 from a friend. He tried to install a custom firmware and killed the G4.
I see the G4 in the device manager as a qualcomm HS-USB QDloader 9008, but nothing more.
With the LGFlash Tool: It will transfer the files, but after 8 seconds it fails caus of missing download modus.
With LGUP, after I changed the driver to an LG USB COM Port, it connected but at Model: Unknown model. And stopped
I think, I have to install first a bootloader on the device, but how?
Someone can help pls?
Click to expand...
Click to collapse
1) Did you put your phone in download mode before using LGUP?
2) You can install custom recovery using adb commands if your bootloader is unlocked.
rlamba said:
1) Did you put your phone in download mode before using LGUP?
2) You can install custom recovery using adb commands if your bootloader is unlocked.
Click to expand...
Click to collapse
The problem is: It´s dead!
no bootloader, no download mode, no recovery...
The phone is clean.
That´s the big issue.
There is one solution I read with a dump/bin file here at xda...
But I don´t know if it is the right file for the 815, it says yes but...
My plan is, to dump a file via SD-Card to activate the download mode. But I need someone who can say to me " Thats the way, and these are the files you need to"
midwayhero said:
The problem is: It´s dead!
no bootloader, no download mode, no recovery...
The phone is clean.
That´s the big issue.
There is one solution I read with a dump/bin file here at xda...
But I don´t know if it is the right file for the 815, it says yes but...
My plan is, to dump a file via SD-Card to activate the download mode. But I need someone who can say to me " Thats the way, and these are the files you need to"
Click to expand...
Click to collapse
Well for H815 we cant assure SD card will work
The only way is via Medusa pro Emmc repair if you need help pm me maybe i may help you[emoji4]
midwayhero said:
The problem is: It´s dead!
no bootloader, no download mode, no recovery...
The phone is clean.
That´s the big issue.
There is one solution I read with a dump/bin file here at xda...
But I don´t know if it is the right file for the 815, it says yes but...
My plan is, to dump a file via SD-Card to activate the download mode. But I need someone who can say to me " Thats the way, and these are the files you need to"
Click to expand...
Click to collapse
Try this dump!
It worked for me
dev8987.tiwari said:
Well for H815 we cant assure SD card will work
The only way is via Medusa pro Emmc repair if you need help pm me maybe i may help you[emoji4]
Click to expand...
Click to collapse
Thanks a lot, I will come back to your offer. Just wanna give the SD-Card solution one chance
-gloim- said:
Try this dump!
It worked for me
Click to expand...
Click to collapse
Thanks, you got a PM
Hi guys;
So i bought a second hand unlocked D851 ( TMOBILE) with kitkat (cloudy rom) wanted to upgrade it to lolipop but i hard bricked it then used board diag program to bring it back to life but i extracted a d850 rom TOT since the d851 didnt work so now my lg g3 is at&t and permenantly locked ,been trying for a week now to unlocked it for nothing then I read somewhere in this forum that its easy to unlock the d851 using the tmobile app. so is there any way to change it back to D851.
Anyone has any idea?!!
how u use the board diag cuz im stock in qualcomm hs-usb qdloader 9008 and the threadt is closed now
ipus89 said:
how u use the board diag cuz im stock in qualcomm hs-usb qdloader 9008 and the threadt is closed now
Click to expand...
Click to collapse
Try this thread... it is still open & active: https://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
startswithPendswithOOH said:
Try this thread... it is still open & active: https://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
Click to expand...
Click to collapse
how about my problem??!!!
nice8man said:
how about my problem??!!!
Click to expand...
Click to collapse
1)What do you mean permanently locked...carrier/sim, mcafee security, something else? If it's carrier you can order a sim unlock code off of ebay for @$4.00 us, or use any other sim unlock services out there.
2)If you changed a d851 to a d850 using board diag and manually loading the partitions - then why not extract a d851 tot and do the same thing?
startswithPendswithOOH said:
1)What do you mean permanently locked...carrier/sim, mcafee security, something else? If it's carrier you can order a sim unlock code off of ebay for @$4.00 us, or use any other sim unlock services out there.
2)If you changed a d851 to a d850 using board diag and manually loading the partitions - then why not extract a d851 tot and do the same thing?
Click to expand...
Click to collapse
thank you for the reply.
1- its carrier unlock + i have no online wallet and i cant get one
2- thats what im looking for is there a way to manually load d851 partitions i mean when i loaded d850 partitions my phone was in dload mode ( hard bricked) do i have to hard unbrick now again?
by the way i can search for other carriers and i find mine under rat:GSM but i m unable to connect to it .
nice8man said:
thank you for the reply.
1- its carrier unlock + i have no online wallet and i cant get one
2- thats what im looking for is there a way to manually load d851 partitions i mean when i loaded d850 partitions my phone was in dload mode ( hard bricked) do i have to hard unbrick now again?
by the way i can search for other carriers and i find mine under rat:GSM but i m unable to connect to it .
Click to expand...
Click to collapse
1) I don't know of a free way to get an unlock code, so if you can't order one you're probably stuck. Pay a friend who can order one for you?
2) If we're on the same page here and you previously used the board diag tool then that should work again. Hard brick usually shows up in your device manager as qualcomm 9008 instead of an lg device, so to get back to that condition you would have to open the phone up and short a pin -
follow the guide in the link I posted before and you should be good to go. I don't have links for any d851 tot files though...sorry, not my variant.
startswithPendswithOOH said:
1) I don't know of a free way to get an unlock code, so if you can't order one you're probably stuck. Pay a friend who can order one for you?
2) If we're on the same page here and you previously used the board diag tool then that should work again. Hard brick usually shows up in your device manager as qualcomm 9008 instead of an lg device, so to get back to that condition you would have to open the phone up and short a pin -
follow the guide in the link I posted before and you should be good to go. I don't have links for any d851 tot files though...sorry, not my variant.
Click to expand...
Click to collapse
so i need to hard brick my phone again?
nice8man said:
so i need to hard brick my phone again?
Click to expand...
Click to collapse
Unfortunately...I think so. If you were to try and use the lg flash tool and try and tot a d851 file into a d850 it'll probably throw some errors - model check, for ex - and won't flash. You can try and see for yourself if you'd like...here's a link for a couple tools; the 1st is kdz method, second is tot: https://forum.xda-developers.com/showthread.php?t=2785089
To brick it again follow guide I linked( https://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359), short that 2nd jtag pin in the pic for @5 seconds, plug in the usb, and it should go to qualcomm 9008. You already know how to do the rest as far as loading partitions and such, and if you don't the guide will tell you what to do.
Good luck :good:
startswithPendswithOOH said:
Unfortunately...I think so. If you were to try and use the lg flash tool and try and tot a d851 file into a d850 it'll probably throw some errors - model check, for ex - and won't flash. You can try and see for yourself if you'd like...here's a link for a couple tools; the 1st is kdz method, second is tot: https://forum.xda-developers.com/showthread.php?t=2785089
To brick it again follow guide I linked( https://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359), short that 2nd jtag pin in the pic for @5 seconds, plug in the usb, and it should go to qualcomm 9008. You already know how to do the rest as far as loading partitions and such, and if you don't the guide will tell you what to do.
Good luck :good:
Click to expand...
Click to collapse
the link you attached is for mobiles that are already hard bricked mine is not
nice8man said:
the link you attached is for mobiles that are already hard bricked mine is not
Click to expand...
Click to collapse
Yeah....and?
Re-read your previous post where you asked if you'll have to brick it again.
I said yes, and gave you a link on how to do it. Did you read the link? My guess would be no, since the 1st 4 steps tell you how to brick it and enter qualcomm9008 mode.
You're on your own now. Good luck. And you're welcome for the time I spent trying to help you.
startswithPendswithOOH said:
Yeah....and?
Re-read your previous post where you asked if you'll have to brick it again.
I said yes, and gave you a link on how to do it. Did you read the link? My guess would be no, since the 1st 4 steps tell you how to brick it and enter qualcomm9008 mode.
You're on your own now. Good luck. And you're welcome for the time I spent trying to help you.
Click to expand...
Click to collapse
Thank you for your replies man i really appriciate it...i have read that topic like 5 times; maybe i dont understand english very well but when i read the title LG G3 Hard Brick Recovery+ Required Materials:Bricked LG G3 i thought he meant that this topic is for people that has thier phone bricked and need to recover them.
nice8man said:
Thank you for your replies man i really appriciate it...i have read that topic like 5 times; maybe i dont understand english very well but when i read the title LG G3 Hard Brick Recovery+ Required Materials:Bricked LG G3 i thought he meant that this topic is for people that has thier phone bricked and need to recover them.
Click to expand...
Click to collapse
It's cool. Yes the guide is for already bricked phones, but what I was trying to say is since you have a functional phone rt now you're gonna have to brick it, and by brick it I mean qualcomm9008 mode, and that's what the 1st part of the guide shows you how to do by shorting out the pin. Once you get to Qualcomm mode you can then use the board diag tool and load your partitions that you extracted from the tot and hopefully get back to your original d851 phone and get back up and running. Does that make more sense?
Again...good luck
startswithPendswithOOH said:
It's cool. Yes the guide is for already bricked phones, but what I was trying to say is since you have a functional phone rt now you're gonna have to brick it, and by brick it I mean qualcomm9008 mode, and that's what the 1st part of the guide shows you how to do by shorting out the pin. Once you get to Qualcomm mode you can then use the board diag tool and load your partitions that you extracted from the tot and hopefully get back to your original d851 phone and get back up and running. Does that make more sense?
Again...good luck
Click to expand...
Click to collapse
I did not know that you can hard brick the phone by shorting the pins; thank you.
startswithPendswithOOH said:
It's cool. Yes the guide is for already bricked phones, but what I was trying to say is since you have a functional phone rt now you're gonna have to brick it, and by brick it I mean qualcomm9008 mode, and that's what the 1st part of the guide shows you how to do by shorting out the pin. Once you get to Qualcomm mode you can then use the board diag tool and load your partitions that you extracted from the tot and hopefully get back to your original d851 phone and get back up and running. Does that make more sense?
Again...good luck
Click to expand...
Click to collapse
I hard bricked it again and then extracted another D851 tot and then loaded all the necessary partitions but the phone still on qload mode i copied the sbl1.mbm of the D850 and tried them with D851 partitions the phone revived but not in download mode.
I managed tp recover all partitions and the phone is on dowloading mode but still detected as d850 so i have the dll cross error everytime i try to flash a rom even with using the custon dll file.