Related
Hi all, I have some problems on my gnex.
This happens because I think I have deleted some system files.
1st problem: when I install a rom at the first boot the phone gives me this error: "the application speech engine Google has locked in an unusual way"
2nd problem: when I open camera or gallery the phone gives me this error: "no external storage available"
3rd problem: sometimes the phone gives me the error: "youtube application has locked in an unusual way"
Ok...there are too much problems...just a question now: I want to reset ALL my gnex, I want to delete ALL the files there are in it. I can't do it flashing a new rom or formatting system from recovery. How can I do?
Thanks!
need more details
Without some more details on what ROM you are having these issues with, which recovery you're using, ... it's kind of difficult to help out... That aside, when you flash a new ROM, be sure to first do a full wipe through the recovery. I've flashed my phones numerous times over the years and every single time I had a problem at first boot it was because I didn't do the full wipe. Also, carefully read the instructions posted on the first (and second & third if any) thread, usually the dev explains carefully which steps are necessary to succeed.
Gunthy` said:
Without some more details on what ROM you are having these issues with, which recovery you're using, ... it's kind of difficult to help out... That aside, when you flash a new ROM, be sure to first do a full wipe through the recovery. I've flashed my phones numerous times over the years and every single time I had a problem at first boot it was because I didn't do the full wipe. Also, carefully read the instructions posted on the first (and second & third if any) thread, usually the dev explains carefully which steps are necessary to succeed.
Click to expand...
Click to collapse
I have these problems with all roms, recovery cwm non touch and i always do a wipe before flashing roms
Now I just want to know how to delete every file in my phone and come back to original
Frenix27 said:
I have these problems with all roms, recovery cwm non touch and i always do a wipe before flashing roms
Now I just want to know how to delete every file in my phone and come back to original
Click to expand...
Click to collapse
That's odd... Maybe something wrong with the device itself in that case... To go back to stock, the easiest way by far is the GNex Toolkit. It has an option to download the Google image & lets you easily flash it.
Gunthy` said:
That's odd... Maybe something wrong with the device itself in that case... To go back to stock, the easiest way by far is the GNex Toolkit. It has an option to download the Google image & lets you easily flash it.
Click to expand...
Click to collapse
And via gnex toolkit, with this option, all system files will be deleted?
Frenix27 said:
And via gnex toolkit, with this option, all system files will be deleted?
Click to expand...
Click to collapse
Well that depends what you mean by that... What it will do is flash the stock ROM that is made by Google onto your device. It will replace the current installed system with the stock one. It will be like when you first got the phone, with the default ICS installed. Obviously a device without a system installed on it would be useless, unless you're looking for a new expensive paper weight of course .
If you still have the same problems after that, I'd recommend returning it to the shop you got it from for a repair/refund. Don't forget to re-lock it though if you decide to go that way .
The problem is that with root explorer i see two folder about storage: sdcard and storage>sdcard0. I think i have deleted some files in these folders. Is there a way to reset their files?
/sdcard & /storage/sdcard0 both refer to the same, namely the internal memory. No way to recover deleted data though. What exactly did you delete??
Frenix27 said:
The problem is that with root explorer i see two folder about storage: sdcard and storage>sdcard0. I think i have deleted some files in these folders. Is there a way to reset their files?
Click to expand...
Click to collapse
Flashing the stock image will return all your files to factory. You don't need to delete anything.
Sent from my LGL55C using Tapatalk 2
Gunthy` said:
That's odd... Maybe something wrong with the device itself in that case... To go back to stock, the easiest way by far is the GNex Toolkit. It has an option to download the Google image & lets you easily flash it.
Click to expand...
Click to collapse
Use odin or fastboot. Kits are easier but i trust fastboot above all. And do a backup before flashing anything...tag way can restore. Then factory wipe, then format cache, then go to advanced and format dalvik, THEN flash the ROM
Android is upgrading...
JediNinjafication said:
Use odin or fastboot. Kits are easier but i trust fastboot above all. And do a backup before flashing anything...tag way can restore. Then factory wipe, then format cache, then go to advanced and format dalvik, THEN flash the ROM
Android is upgrading...
Click to expand...
Click to collapse
The toolkit uses fastboot... It just presents you with scripted menus and composes the correct command depending on your choices. Makes it a lot easier to get stuff done without having to remember all the different commands .
Are you sure? So i have to flash the stock image?
Without more info on what exactly you deleted it's hard to say. Flashing stock should work for restoring the phone though .
Gunthy` said:
The toolkit uses fastboot... It just presents you with scripted menus and composes the correct command depending on your choices. Makes it a lot easier to get stuff done without having to remember all the different commands .
Click to expand...
Click to collapse
Ahhh. I dunno, I like it. And I usually watch a qbking77 video while I do it.
Android is upgrading...
JediNinjafication said:
Ahhh. I dunno, I like it. And I usually watch a qbking77 video while I do it.
Android is upgrading...
Click to expand...
Click to collapse
Ok so the last question: i remember i had imm76i when i bought the phone. I have to flash that? Where can I find?
Just use the toolkit I linked to earlier. You can make it download the latest google stock image and flash that one.
Gunthy` said:
Just use the toolkit I linked to earlier. You can make it download the latest google stock image and flash that one.
Click to expand...
Click to collapse
ok ty
I have a stock glide on gingerbread and want to test out the CM10 in the development section.
If anyone could help with a step by step guide it would really be appreciated. I know there are
other posts which describe each part but I am having trouble find them. Thank You.
EGGrollBEAST said:
I have a stock glide on gingerbread and want to test out the CM10 in the development section.
If anyone could help with a step by step guide it would really be appreciated. I know there are
other posts which describe each part but I am having trouble find them. Thank You.
Click to expand...
Click to collapse
Odin stock ics leak
Odin CWM recovery
wipe data
wipe cache
wipe dalvik cache
format data
format cache
format system
choose zip and flash
Flash Gapps!
from http://forum.xda-developers.com/showthread.php?t=1940677 OP
Thank you for your reply. I am a total noob. how do I use Odin??
Sent from my SAMSUNG-SGH-I927 using xda app-developers app
BEFORE YOU START. I AM NOT RESPONSIBLE FOR ANY DAMAGE OR DATA LOSS ANY OF THESE STEPS MAY CAUSE. ALWAYS FLASH AT YOUR OWN RISK.
Note: Suggestions, comments & questions are welcome. Will improve as much as needed.
1. BACKUP. There are many apps you can find to backup any data. Backup all data you'll want to keep until you're 100% satisfied then move it to a folder on your PC. Personally, I use Titanium Backup Pro and backup everything to Google Drive.
2. DOWNLOAD. A GB kernel, rooted AT&T ROM/Rogers ROM, stock ICS leak, CWM, and then go to the CM10 thread and grab the latest build of the ROM & Gapps. So you should have 6 files total. To make your life easier, put them all in 1 folder.
3. ROOT. Turn off your phone. Hold the top part of the volume rocker and turn on the phone. It should boot into download mode if done correctly. Connect phone to PC via USB. On your PC, install & open Odin. Click on PDA and locate your GB kernel. Then click start & wait. If successful, you should see green and you'll be rooted. I believe whenever you use ODIN, it is called a 'flash.' I hope someone will correct me if I'm wrong. Anyway, go back into download mode and now place the rooted ROM in the PDA section followed by clicking start again. When the phone is done booting, go to the Play store and get Superuser app. This allows you to give permission to operations that require root. Make sure it is updated!
4. CLEAN. Now you'll want to wipe your phone to minimize the chances of anything going wrong. Instead of holding the top part of the volume rocker, you'll hold the bottom. Then hold it as you start the phone. This is the stock recovery menu. I don't remember precisely what the options are called but you will want to wipe cache, dalvik, data and system.
5. UPDATE OS. Time to open up that stock ICS leak. When open, it should appear similar to Odin. Make sure your phone is in download mode again, connected via USB and click start again. You'll notice that your phone might take a while to boot up. It'll be updating files and apps so be patient.
6. CWMR. After it's all booted up, time to go back to download mode again. In ODIN, you'll want to click on PDA again and this time flash the CWMR file. Click start and you're done in no time.
7. CLEAN AGAIN. Now you'll want to turn off your phone and boot the phone holding the bottom of the rocker. You'll boot into CWMR. Time to wipe and format again. You'll find the first 2 wipe options on the first page. The wiping of dalvik cache will be in the ADVANCED menu. Then you'll want to go into the MOUNTS AND STORAGE menu. Format system, cache & data.
8. CM10. Now while still in CWMR, you'll need to go into the MOUNTS AND STORAGE menu and select MOUNT USB STORAGE. You'll want to connect your phone to your PC with the USB. Place the CM10 and Gapps files in the main directory of your PHONE'S INTERNAL STORAGE. Select UNMOUNT on your phone, disconnect from USB and now you'll want to go to the option INSTALL ZIP FROM SDCARD.. then go to the CHOOSE.. option and select the final fruit of your labor, CM10. When it's done doing it's thing, REBOOT SYSTEM. Be patient and let everything load.
9. GAPPS. After everything has loaded, you want to turn off the phone and boot into CWMR one last time. Go to INSTALL ZIP FROM SDCARD, CHOOSE ZIP and flash that Gapps file. Then REBOOT SYSTEM.
10. RESTORE. Reinstall the app you used to backup your stuff, move your backup files you put on the PC back to it's rightful place and restore. You should be good to go.
rogernizzLe said:
BEFORE YOU START. I AM NOT RESPONSIBLE FOR ANY DAMAGE OR DATA LOSS ANY OF THESE STEPS MAY CAUSE. ALWAYS FLASH AT YOUR OWN RISK.[/SIZE]
If any of the more experienced people find errors in this "guide", please let me know.
1. BACKUP.
.
.
.
Click to expand...
Click to collapse
Thank you for doing this!
Just checking - is there not a thread / guide for this elsewhere already? (Or am I confusing versions - not for the first time, with xda-developers!)
Suggestions:
- move this to the start of a new thread where you can reserve the first 3 posts, you can update/edit it, etc.
1. BACKUP:
- it would be useful to mention CWMR backup. (i.e. Botch it, restore the image, try again.)
- I like not leaving people hanging and at least mentioning TB as you have so they have a search path to follow. It would be worth mentioning that TB Free will be 'good enough' to keep them safe (one time) through this process. [But long term / good app / scheduling makes TB Pro worthwhile.]
- Making TB and CWMR a link would be useful, and not just a link to the 'product' page, but link to a thread that describes how to do so. 'Product' links will be contained within them. It's all very well to get a link to what a beastie is, but frequently knowing what it is, and how to put it into practice are two different things. Linking to a thread of the latter type would be the useful one.
3. ROOT
- one of the problems when talking about ODIN is the perception left that it is a single thing. So saying 'ODIN (PC)' would be useful here. Whether you point out that it talks to the ODIN (client?) already built in to the PDA is up to you.
4. UPDATE OS:
- don't you want to be talking about the alpha/beta dudejb version here?
5. CWMR
- wouldn't you want to do this first? See Backup comments, above.
- is this even necessary? It's a VERY GOOD IDEA, but is CWMR needed to run the phone 'stock' (CM10)?
7. CM10
- links / explanations are going to be useful here.
- e.g. There's a lot of talk of subsequent steps, such as backlight fix. You might want to note such is already built in, or not. (As people read they come across these additional fixes, and it's not always apparent that months later someone built the fixes in already. It's easy to go in circles trying to get a coherent, whole, current, view of the world.)
SD Card management - first you TB Backup, then you wipe the SD Card (or so a quick glance appears). I know you haven't actually said that, but some explicit clarity may be helpful.
Thanks for the suggestions and good question. I don't think there are any guides out there.. but this is just from how I did it. Tried to make it as simple as I could without adding branching steps. Also, it's very narrow because I can only speak on behalf of the what worked for me. If there's a big need for this to be in a thread of it's own, I'll gladly make one.
-I didn't mention CWMR backup for two reasons. I didn't use it and I don't rely on it. Perhaps I should mention it anyway though regardless.
-Never used dudejb's version so I didn't list it.
-Needed CWMR at that point to install CM10 & Gapps zips. I think you can also use Odin but doing it via CWMR gives him a chance to familiarize himself with what he'll be using to flash future versions.
-Didn't put links to CM10 since he already knows where it is and can most likely read the fixes & not-fixed list himself.
Thanks RogerNIZZLE I appreciate the guide and I believe a lot of other ppl will too.
There is one hiccups i'm coming across. After I wipe, data, cache, dalvik cache,
I **format data, format cache, format system** then when it reboot and it just stays at the
start up screen that shows SAMSUNG. I let it sit for 5 but nothing happens, its still
on SAMSUNG. I've repeated the steps a few times? Is there any suggestions on what I can do?
Hm. Do steps 4, 5, 7, 8, 9. Sorry! All hope is not lost.
rogernizzLe said:
Hm. Do steps 4, 5, 7, 8, 9. Sorry! All hope is not lost.
Click to expand...
Click to collapse
Do steps 4,5 and then copy the cm10 and gapps to you phone internal memory. Then follow step 6. Lastly install cm10 and gapps together and reboot you phone.
Sent from my SGH-I927
@roger:
You should start a thread, and I'll request to get it stickied. This could help a lot of new users.
One thing I would add - before flashing ICS, wipe system data cache dalvik (either with stock recovery or cwmr). Then boot into download and flash ICS.
Okie dokie, I will do this after work.
EGGrollBEAST said:
I have a stock glide on gingerbread and want to test out the CM10 in the development section.
If anyone could help with a step by step guide it would really be appreciated. I know there are
other posts which describe each part but I am having trouble find them. Thank You.
Click to expand...
Click to collapse
i suppose u already know that you need a rooted phone before rom flashing is possible. what i did was to flash ics leak using clockwork recovery and then cm10.
IS ANYBODY AWARE THAT THERE IS NO OFFICIAL CM10 NIGHTLY ON GET.CM??? Please stop telling people to look there!
bs27975 said:
Thank you for doing this!
4. UPDATE OS:
- don't you want to be talking about the alpha/beta dudejb version here?
Click to expand...
Click to collapse
How did I get a version? Not sure what is meant by that?
JB
C3LLxM8 said:
IS ANYBODY AWARE THAT THERE IS NO OFFICIAL CM10 NIGHTLY ON GET.CM??? Please stop telling people to look there!
Click to expand...
Click to collapse
Did you know you don't have to tell at us... once you learn that. I'd like to say there won't be an official cm10 because the official cm secs think our phone runs on different hardware than it actually does and thinks they can get the phys. keyboard working. You should thank dman for even getting cm9 and beta cm10 where they are.
Sent from my SGH-I927 using xda app-developers app
Rawr0w0 said:
Did you know you don't have to tell at us... once you learn that. I'd like to say there won't be an official cm10 because the official cm secs think our phone runs on different hardware than it actually does and thinks they can get the phys. keyboard working. You should thank dman for even getting cm9 and beta cm10 where they are.
Sent from my SGH-I927 using xda app-developers app
Click to expand...
Click to collapse
Yes dman should be thanked, so hard his thanks gland fails.
Official CyanogenMod is not being made because -we- have different hardware than the other SGSII range of phones.
So yeah. No use pointing at get.cm
In other news, these instructions, amazing.
Sent from my SGH-I927 using xda premium
I take to credit for the work on the various links i'll post. (I WONT BE HELD RESPONSIBLE FOR ANY DAMAGE TO YOUR PHONE)
1. In order to get CM10, first get instructions on rooting(if you have root,SKIP) via http://forum.xda-developers.com/showthread.php?t=1378082
2. When you have gotten root, flash CWMR via http://forum.xda-developers.com/showthread.php?t=1458153 or http://forum.xda-developers.com/showthread.php?t=2007198
(MAKE SURE YOU DO A NANDROID BACKUP AFTER YOU SUCCESSFULLY FLASH CWMR)
3. Next step is to flash ICS leak UCLG9 via http://forum.xda-developers.com/showthread.php?t=1841502 (could not find thread for CWM flashable UCLJ3)
4. Once you are now on UCLG9, you can now flash CM10 by Dman.
If i helped, please hit thanks.
Sent from my super SGH I927(Flashed almost all custom Roms). Currently on Dmans CWM flashable UCLJ3
I maybe JM but really XPerienced.
Hi,
I'm new here so please go easy on this "noob"
It was my first to unlock and root my phone, followed by flashing a stock ROM (Which is exactly why I rooted it)
I flashed this JB 4.2.2 stock build [ROM] [OTA][GSM] Android 4.2.2 JDQ39: Rooted | Galaxy Nexus > XDA for my Galaxy Nexus
Now...
I can't disable Next-word suggestions in the Language & Input -> Google Keyboard Settings
Also, I noticed a few seconds of lag when pressing the power button to unlock the phone, when viewing recent apps (via the soft-key), and when opening the Camera too
Also, when I choose the "Recent Apps" soft key.. it's as the app that's currently being used is minimised and the homescreen is shown without any icons
The Build came with Busybox pre-installed and now its gone after a day of using my phone... I literally can't find it.
I searched in the play store "BusyBox" and the result is 3 different apps with the same name!
Any Advice?
AMKhatri said:
Hi,
I'm new here so please go easy on this "noob"
It was my first to unlock and root my phone, followed by flashing a stock ROM (Which is exactly why I rooted it)
I flashed this JB 4.2.2 stock build [ROM] [OTA][GSM] Android 4.2.2 JDQ39: Rooted | Galaxy Nexus > XDA for my Galaxy Nexus
Now...
I can't disable Next-word suggestions in the Language & Input -> Google Keyboard Settings
Also, I noticed a few seconds of lag when pressing the power button to unlock the phone, when viewing recent apps (via the soft-key), and when opening the Camera too
Also, when I choose the "Recent Apps" soft key.. it's as the app that's currently being used is minimised and the homescreen is shown without any icons
The Build came with Busybox pre-installed and now its gone after a day of using my phone... I literally can't find it.
I searched in the play store "BusyBox" and the result is 3 different apps with the same name!
Any Advice?
Click to expand...
Click to collapse
go back to recovery, format/wipe /system partition, reflash rom.
For your reference, a good app to install bb is stephen (stericsson)'s busybox installer (play store link). Obviously, it needs root.
Next time, read the stickies.
http://forum.xda-developers.com/showthread.php?t=1812959
How do I get “root”?
If you are booted into a custom recovery (recoveries will be covered later), root is enabled by default. If you want root while booted into Android, you will need to place two files on your system partition: an “su” binary which grants root access, and a superuser app that manages that access. The two that are available are ChainsDD’s Superuser and Chainfire’s SuperSU. Usually these files are packaged up in a zip file that is flashable using a custom recovery, but they can be flashed manually using ADB. Both of these methods will be described below.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=26328017&postcount=123
As you probably noticed by now, you didn't need to flash a full "custom stock ROM" to root.
beekay201 said:
go back to recovery, format/wipe /system partition, reflash rom.
For your reference, a good app to install bb is stephen (stericsson)'s busybox installer (play store link). Obviously, it needs root.
Next time, read the stickies.
http://forum.xda-developers.com/showthread.php?t=1812959
http://forum.xda-developers.com/showpost.php?p=26328017&postcount=123
As you probably noticed by now, you didn't need to flash a full "custom stock ROM" to root.
Click to expand...
Click to collapse
Thanks for replying!
I'm totally new to this rooting &/ flashing thing, so please go easy
So, what you're saying is that I should boot into fastboot mode, wipe system partition (this will format the whole SD card right?), install the same ROM again?
I guess I'll need to install Titanium Backup to backup my apps and settings, I'll have to search for an article for the best way to do it as well..
Can I do it like this:
Open "Rom Manager", Select "Install ROM from SD Card", install it.. ???
PS: Do you have a recommendation for a better ROM, perhaps my choice of ROM wasn't correct...
AMKhatri said:
Thanks for replying!
I'm totally new to this rooting &/ flashing thing, so please go easy
So, what you're saying is that I should boot into fastboot mode, wipe system partition (this will format the whole SD card right?), install the same ROM again?
I guess I'll need to install Titanium Backup to backup my apps and settings, I'll have to search for an article for the best way to do it as well..
Can I do it like this:
Open "Rom Manager", Select "Install ROM from SD Card", install it.. ???
PSo you have a recommendation for a better ROM, perhaps my choice of ROM wasn't correct...
Click to expand...
Click to collapse
You can wipe the system partition in a custom recovery (dont know if you can with stock). And yes you could flash via ROM manager but I wouldnt recommend it. I am on XenonHD 11.1 and loving it. But roms are a personal choice so there is no 'best' ROM. Just try out.
Sent from my Galaxy Nexus using XDA Premium HD app
mrgnex said:
You can wipe the system partition in a custom recovery (dont know if you can with stock). And yes you could flash via ROM manager but I wouldnt recommend it. I am on XenonHD 11.1 and loving it. But roms are a personal choice so there is no 'best' ROM. Just try out.
Sent from my Galaxy Nexus using XDA Premium HD app
Click to expand...
Click to collapse
The tutorial I followed didn't mention using the ROM manager, but I had not choice.. becuase whenever I went into fastboot mode manually, it got stuck on the screen displaying Google (I waited for minutes without any luck)
How would you recommend CyanogenMod 10.1.2 against the stock 4.2.2 which I have currently?
I read these threads as well whereby they said that there is no "real" solution to the issues:
http://forum.xda-developers.com/showthread.php?t=2178962
http://forum.xda-developers.com/showthread.php?t=2363872
AMKhatri said:
Thanks for replying!
I'm totally new to this rooting &/ flashing thing, so please go easy
So, what you're saying is that I should boot into fastboot mode, wipe system partition (this will format the whole SD card right?), install the same ROM again?
I guess I'll need to install Titanium Backup to backup my apps and settings, I'll have to search for an article for the best way to do it as well..
Can I do it like this:
Open "Rom Manager", Select "Install ROM from SD Card", install it.. ???
PS: Do you have a recommendation for a better ROM, perhaps my choice of ROM wasn't correct...
Click to expand...
Click to collapse
Mr., please, read the LINK i gave you! THIS ONE ->>>> http://forum.xda-developers.com/showthread.php?t=1812959
If you read it, you'll stop thinking you need to be doing anything at this point in FASTBOOT interface! Like mrgnex says, you need to be on a custom recovery to format /system. (Have you read the link yet? By now you should know that the /system partition and the /sdcard/ (aka userdata) are 2 different things!)
mrgnex said:
You can wipe the system partition in a custom recovery (dont know if you can with stock). (...) roms are a personal choice so there is no 'best' ROM. Just try out.
Click to expand...
Click to collapse
+1
For your reference, you can't erase /system in stock recovery.
AMKhatri said:
The tutorial I followed didn't mention using the ROM manager, but I had not choice.. becuase whenever I went into fastboot mode manually, it got stuck on the screen displaying Google (I waited for minutes without any luck)
How would you recommend CyanogenMod 10.1.2 against the stock 4.2.2 which I have currently?
I read these threads as well whereby they said that there is no "real" solution to the issues:
http://forum.xda-developers.com/showthread.php?t=2178962
http://forum.xda-developers.com/showthread.php?t=2363872
Click to expand...
Click to collapse
Stop! THERE'S NO NEED FOR FASTBOOT HERE!
Thanks Guys for replying.
Yes, I read the info in the link, it was very helpful.
I'm still confused though.. "Fast boot" and "Recovery" are they the same thing?
I tried a "fix" mentioned by someone about using a live wallpaper such as "Water", I tried it and it's been 1/2 hour and it's really smooth compared to before...
Yes, I do have a custom recovery, actually I don't know why, but It seems I've got two according to ROM Manager.
It says I've got Clockwork Mod Recovery & TWRP.
I also tried going into recovery (Volume up + Down + Power) and it worked this time, when I select recovery, it goes into CWRM
I also did a bit of research about CyanogenMod 10.1.2 and from what I could gather it's liked by people a lot.
I'm guessing that definitely some time ahead it'll get all "laggy" again, Is there any reason according to you why I shouldn't install it compared to the stock 4.2.2 I have?
AMKhatri said:
Thanks Guys for replying.
Yes, I read the info in the link, it was very helpful.
I'm still confused though.. "Fast boot" and "Recovery" are they the same thing?
I tried a "fix" mentioned by someone about using a live wallpaper such as "Water", I tried it and it's been 1/2 hour and it's really smooth compared to before...
Yes, I do have a custom recovery, actually I don't know why, but It seems I've got two according to ROM Manager.
It says I've got Clockwork Mod Recovery & TWRP.
I also tried going into recovery (Volume up + Down + Power) and it worked this time, when I select recovery, it goes into CWRM
I also did a bit of research about CyanogenMod 10.1.2 and from what I could gather it's liked by people a lot.
I'm guessing that definitely some time ahead it'll get all "laggy" again, Is there any reason according to you why I shouldn't install it compared to the stock 4.2.2 I have?
Click to expand...
Click to collapse
So to get things clear:
No fastboot and recovery arent the same thing.
Vol up+down+power brings you into fast boot and not recovery.
Apparently you dont have 2 custom recoverys since you booted into cwm.
Cm10 is great. But there are many great roms out there. You can start off with cm and then (if you please) look further.
I dont see any reason to not install cm10.1.2 since a whole team built and optimized it. So basically it is a better stock.
When you think your phone is slow you should look into the custom kernels. Thats a different story which I will not begin before you want to
Sent from my Galaxy Nexus using XDA Premium HD app
mrgnex said:
So to get things clear:
No fastboot and recovery arent the same thing.
Vol up+down+power brings you into fast boot and not recovery.
Apparently you dont have 2 custom recoverys since you booted into cwm.
Cm10 is great. But there are many great roms out there. You can start off with cm and then (if you please) look further.
I dont see any reason to not install cm10.1.2 since a whole team built and optimized it. So basically it is a better stock.
When you think your phone is slow you should look into the custom kernels. Thats a different story which I will not begin before you want to
Sent from my Galaxy Nexus using XDA Premium HD app
Click to expand...
Click to collapse
Thanks! Now it's definitely clear!
I'll download CM10.1.2 tomorrow and will decide to install it once Stock JB 4.2.2 starts acting up again.
In the meantime I'll read on about kernels, please keep don't close this thread...yet.
clerk usdEuro
I've decided that I will test out the Rom that I have currently (4.2.2) for a few weeks, and then flash CM.
I wanted to know one more thing, Is it bad to flash ROMs to your phone every now and then?
Because I've seen people flashing different ROMs on their phone, I don't wanna damage my phone as I want it to last as long as I can make it.
(by "Bad" I mean... does it reduce the phone's life or it's hardware's life span)
AMKhatri said:
I've decided that I will test out the Rom that I have currently (4.2.2) for a few weeks, and then flash CM.
I wanted to know one more thing, Is it bad to flash ROMs to your phone every now and then?
Because I've seen people flashing different ROMs on their phone, I don't wanna damage my phone as I want it to last as long as I can make it.
(by "Bad" I mean... does it reduce the phone's life or it's hardware's life span)
Click to expand...
Click to collapse
No it can't. I was a flashaholic (until I discovered XenonHD) and my phone didn't got worse. Only overclocking the CPU and gpu can affect the life of the CPU or gpu (or both XD). Just do a fresh install everytime and read the post of the ROM of your choice to see what to do to get it working optimally. If you have any problems just ask.
Sent from my Galaxy Nexus using XDA Premium HD app
mrgnex said:
No it can't. I was a flashaholic (until I discovered XenonHD) and my phone didn't got worse. Only overclocking the CPU and gpu can affect the life of the CPU or gpu (or both XD). Just do a fresh install everytime and read the post of the ROM of your choice to see what to do to get it working optimally. If you have any problems just ask.
Sent from my Galaxy Nexus using XDA Premium HD app
Click to expand...
Click to collapse
Thanks...
I'll flash CM in a week or two, as I'm on a tight schedule currently, and I also wanna note down the average battery time I get out of 4.2.2
So... since 4.3 is now out, I was thinking it'd be better for me to flash it other than anything else.
I'll most probably download the stock rom from:
https://developers.google.com/android/nexus/images#yakjujwr66v
So far I came across this thread having the steps to flash 4.3
http://forum.xda-developers.com/showthread.php?t=2377307
But I wanna flash it and lose my data, so that it's as fresh as it can be...
Will that work if I use "wugfresh root toolkit"?
AMKhatri said:
So... since 4.3 is now out, I was thinking it'd be better for me to flash it other than anything else.
I'll most probably download the stock rom from:
https://developers.google.com/android/nexus/images#yakjujwr66v
So far I came across this thread having the steps to flash 4.3
http://forum.xda-developers.com/showthread.php?t=2377307
But I wanna flash it and lose my data, so that it's as fresh as it can be...
Will that work if I use "wugfresh root toolkit"?
Click to expand...
Click to collapse
With the stock package there is no need for a toolkit.
Hell, there's no reason for a toolkit any time.
Sent from my Galaxy Nexus
Pirateghost said:
With the stock package there is no need for a toolkit.
Hell, there's no reason for a toolkit any time.
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
What was I thinking...
I apologize guys... I guess I wasn't thinking straight as its past midnight here...
So just to clarify stuff so that I don't end up doing something wrong:
-> Head into Recovery Mode (with usb debugging enabled... connect usb cable to phone and pc)
-> Wipe System
-> Wipe Cache
-> Install from SD card (select .zip file)
right?
Also, I performed a backup of the applications I have via Titanium Backup, They'll work on 4.3 when I restore them right? or do you recommend downloading them from the play store again?
Sorry for being such a noob, and Thanks for your responses!
backup everything from your /sdcard to your computer, titanium backups and a nandroid
the google stock package is NOT flashable in CWM/TWRP
if you follow the GOOGLE instructions it WILL wipe your device (remember that backup you made of everything?)
alternatively you can make sure and have adb/fastboot working on your computer properly, extract all the files out of the zip (including the tar.gz located inside), and in recovery, do a factory reset, then boot to fastboot, fastboot flash system and boot ....
as for Titanium Backup, there is a work around to get it working on 4.3, but root is lacking full power.
Pirateghost said:
backup everything from your /sdcard to your computer, titanium backups and a nandroid
the google stock package is NOT flashable in CWM/TWRP
if you follow the GOOGLE instructions it WILL wipe your device (remember that backup you made of everything?)
alternatively you can make sure and have adb/fastboot working on your computer properly, extract all the files out of the zip (including the tar.gz located inside), and in recovery, do a factory reset, then boot to fastboot, fastboot flash system and boot ....
as for Titanium Backup, there is a work around to get it working on 4.3, but root is lacking full power.
Click to expand...
Click to collapse
Thanks!
I'm now on Android 4.3
I'm full of excitement atm :victory:
I took a backup of my apps using titanium backup, I installed it but can't use it, it says I need root (which I already had before).
I read online somewhere that I need to root again, but I don't wanna lose all my data/ apps I installed again...
Any ideas?
If I use Wugfresh Nexus Root Toolkit... will I lose my data?
Thanks for the continued support!
AMKhatri said:
Thanks!
I'm now on Android 4.3
I'm full of excitement atm :victory:
I took a backup of my apps using titanium backup, I installed it but can't use it, it says I need root (which I already had before).
I read online somewhere that I need to root again, but I don't wanna lose all my data/ apps I installed again...
Any ideas?
If I use Wugfresh Nexus Root Toolkit... will I lose my data?
Thanks for the continued support!
Click to expand...
Click to collapse
Seriously, how hard can it be for you people to waste 5, 5!!! minutes to browse the forums.
http://forum.xda-developers.com/showthread.php?t=2377318
Thanks!
According to a friend's recommendation I used Wugfresh Nexus Root Toolkit to Root, and surprisingly didn't lose any of my data!
Once again, Thanks for all the help everyone... You've all been quite helpful.
Hello all-
I was just recently running CM 10.2 RC1 but had to do an install of the correct gapps as it was randomly rebooting. Well the device now is stuck on the Samsung Galaxy S3 screen with the BLUE cyanogen. I have access to TWRP and am able to reflash the .zip file for CM 10.2 RC1 yet it still won't boot? I did the wipe of dalvik, cache, data and system but still no luck? The device is NOT recognized in Odin. I just want to get the phone up and running again, even if it means root is lost.
Please help!!
DroidJay123 said:
Hello all-
I was just recently running CM 10.2 RC1 but had to do an install of the correct gapps as it was randomly rebooting. Well the device now is stuck on the Samsung Galaxy S3 screen with the BLUE cyanogen. I have access to TWRP and am able to reflash the .zip file for CM 10.2 RC1 yet it still won't boot? I did the wipe of dalvik, cache, data and system but still no luck? The device is NOT recognized in Odin. I just want to get the phone up and running again, even if it means root is lost.
Please help!!
Click to expand...
Click to collapse
Do you have it put into Download Mode before you plug it into the computer for Odin to recognize it? If I had it plugged in before I put mine in download mode Odin would not want to pick it up.'
Mr. Rageface
Mr.Rageface said:
Do you have it put into Download Mode before you plug it into the computer for Odin to recognize it? If I had it plugged in before I put mine in download mode Odin would not want to pick it up.'
Mr. Rageface
Click to expand...
Click to collapse
Yes it is recognized once in Download mode...sorry about that. What can I do to get it up and running? I am not new to flashing, etc so it's got me really upset that I cant get it to boot. What could possibly go wrong?
Get a sd card>download a new rom and put the rom in the sd card and flash like a normal ROM
http://fs1.d-h.st/download/00023/E5R/I747UCDLK3_I747ATTDLK3_I747UCDLK3_HOME.tar.md5 You can download that file and put it in the PDA section once you run Odin and run it from there. This will put your phone back to the Stock Rom 4.1.1 and you can restart from there if you want.
Mr. Rageface
xXFl4sh said:
Get a sd card>download a new rom and put the rom in the sd card and flash like a normal ROM
Click to expand...
Click to collapse
I do have an sd card. Phone isn't recognized in Windows so Im not familiar with how I can get the ROM file onto the card from the computer? Can I download the latest AT&T Stock ROM and flash it via Odin?
What your saying is flash a ROM from the external SD card?
DroidJay123 said:
I do have an sd card. Phone isn't recognized in Windows so Im not familiar with how I can get the ROM file onto the card from the computer? Can I download the latest AT&T Stock ROM and flash it via Odin?
What your saying is flash a ROM from the external SD card?
Click to expand...
Click to collapse
No, with the file I told you to download you do not need to have a SD card because you can't boot into the rom you have Windows will not recognize the phone like normal to drag and drop to it. So with this file you can save it to your computer, Open Odin, put your phone into Download Mode, plug it into the computer so that Odin detects it. Then Click PDA and browse to the file you downloaded and tell it to use that file and then Run the process and it will install the original rom onto your phone.
Mr. Rageface
Edit: Sorry I did not realize your previous comment was to xXFl4sh.
Mr.Rageface said:
No, with the file I told you to download you do not need to have a SD card because you can't boot into the rom you have Windows will not recognize the phone like normal to drag and drop to it. So with this file you can save it to your computer, Open Odin, put your phone into Download Mode, plug it into the computer so that Odin detects it. Then Click PDA and browse to the file you downloaded and tell it to use that file and then Run the process and it will install the original rom onto your phone.
Mr. Rageface
Edit: Sorry I did not realize your previous comment was to xXFl4sh.
Click to expand...
Click to collapse
Ok I did the process with the file you referenced. Everything succeeded in Odin with no errors. It's still stuck on just showing the Samsung Galaxy SIII screen but now without the blue cyanogen? What is wrong with this phone??
DroidJay123 said:
Ok I did the process with the file you referenced. Everything succeeded in Odin with no errors. It's still stuck on just showing the Samsung Galaxy SIII screen but now without the blue cyanogen? What is wrong with this phone??
Click to expand...
Click to collapse
Can you get into recovery mode by any chance? If you can do that then it should be possible to do a factory reset from within Recovery Mode and possibly get you past the boot screen. If that doesn't help let me know and I will see what else I can find out for you. Also what all did you have checked and unchecked when you Ran Odin to reinstall the Stock Rom? If you had any of them other than Auto-Reboot on that may also have caused a problem http://forum.xda-developers.com/showthread.php?t=1722686 here is a forum that will show you how to use Odin. I apologize for not remembering about telling you what to check and uncheck. But try recovery mode first and do a factory reset and if that does not work, redo the odin install this time only having Auto-Reboot checked.
Mr.Rageface
Mr.Rageface said:
Can you get into recovery mode by any chance? If you can do that then it should be possible to do a factory reset from within Recovery Mode and possibly get you past the boot screen. If that doesn't help let me know and I will see what else I can find out for you. Also what all did you have checked and unchecked when you Ran Odin to reinstall the Stock Rom? If you had any of them other than Auto-Reboot on that may also have caused a problem http://forum.xda-developers.com/showthread.php?t=1722686 here is a forum that will show you how to use Odin. I apologize for not remembering about telling you what to check and uncheck. But try recovery mode first and do a factory reset and if that does not work, redo the odin install this time only having Auto-Reboot checked.
Mr.Rageface
Click to expand...
Click to collapse
Thanks man! I went back into Recovery and did a factory reset/wipe data and it finally got past that screen. Thanks again for your guidance and help. Any ideas as to what could have possibly caused the issue in the first place? I do want to re-root the device again and I am assuming my best bet is to flash a Stock ROM like you referenced with ROOT injected? What order should I follow, flashing a Stock w/Root injected...and then the Recovery of choice? Or vice-versa? What do you recommend?
Again, your timely responses were greatly appreciated. Was really worried I would have to take it to ATT.
DroidJay123 said:
Thanks man! I went back into Recovery and did a factory reset/wipe data and it finally got past that screen. Thanks again for your guidance and help. Any ideas as to what could have possibly caused the issue in the first place? I do want to re-root the device again and I am assuming my best bet is to flash a Stock ROM like you referenced with ROOT injected? What order should I follow, flashing a Stock w/Root injected...and then the Recovery of choice? Or vice-versa? What do you recommend?
Again, your timely responses were greatly appreciated. Was really worried I would have to take it to ATT.
Click to expand...
Click to collapse
It could have been several things that could cause the ROM to do that. I recommend that you make sure that your Bootloader is up to date and then go from there. Download the newest CWM, do a backup of your current rom so that you can flash back to it if you phone messes up. Then when you try to install a new ROM make sure you Wipe: Data then Cache, then Dalvik Cache in Advanced then Format /System. Then from there Install the new Rom, then install the correct GApps, then wipe Cache and Dalvik cache then Reboot into System. It takes messing up a few times to get it right but as long as you follow the guides pretty close and keep a good backup that you know works or keep the knowledge of how to Inject the Stock Rom to your phone when it messes up you shouldn't have much to worry about.
Mr. Rageface
Mr.Rageface said:
It could have been several things that could cause the ROM to do that. I recommend that you make sure that your Bootloader is up to date and then go from there. Download the newest CWM, do a backup of your current rom so that you can flash back to it if you phone messes up. Then when you try to install a new ROM make sure you Wipe: Data then Cache, then Dalvik Cache in Advanced then Format /System. Then from there Install the new Rom, then install the correct GApps, then wipe Cache and Dalvik cache then Reboot into System. It takes messing up a few times to get it right but as long as you follow the guides pretty close and keep a good backup that you know works or keep the knowledge of how to Inject the Stock Rom to your phone when it messes up you shouldn't have much to worry about.
Mr. Rageface
Click to expand...
Click to collapse
Sounds good. Thanks for the info. Obviously the device is not currently rooted or did the Factory Rom file you gave me have root injected? Do you have a recommended way of achieving Root with the Samsung SG3? Just installing a custom Recovery won't achieve Root, correct?
Thanks!
DroidJay123 said:
Sounds good. Thanks for the info. Obviously the device is not currently rooted or did the Factory Rom file you gave me have root injected? Do you have a recommended way of achieving Root with the Samsung SG3? Just installing a custom Recovery won't achieve Root, correct?
Thanks!
Click to expand...
Click to collapse
BTW, how can I confirm I have the most recent bootloader version? It looks like my phone's current baseband version is i747UCDLK3. I did download the boot_CWM_i747UCDMG2.zip file and put it on the internal storage. Do I just want to flash that file to update my bootloader?
Thanks again!
-Jay
Yea that is the newest baseband and yea you just flash it. As far as rooting the phone and everything I recommend this forum. http://forum.xda-developers.com/showthread.php?t=1725839 It has just about everything you could need to know!
Mr.Rageface
Mr.Rageface said:
Yea that is the newest baseband and yea you just flash it. As far as rooting the phone and everything I recommend this forum. http://forum.xda-developers.com/showthread.php?t=1725839 It has just about everything you could need to know!
Mr.Rageface
Click to expand...
Click to collapse
Thanks for the information. The phone that has been all screwed up and the reason I posted a thread in the first place is my gf's GS3. I have her's rooted again and running. I am going to update her baseband version and then install a custom ROM so she's up to 4.3.1. As far as mine goes, I have been fine. I myself also still have the outdated bootloader version. Is it ok to just flash that update for the bootloader without it doing anything wrong? I'm asking this since I'm rooted and running a custom ROM with no current problems. In other words, I don't want to end up saying "it wasn't broke, why did I mess with it" ? I did bookmark that thread you referenced in your last message. Damn that thread is LOADED with just about everything one would possibly need to know about Android and making it their own.
So my g/f accepted the OTA update today (not knowing obviously) and she got updated to 4.3 via AT&T, unfortunately!! I attempted to flash the latest Liquid Smooth ROM and I continue to get a FAILED message during installation. It mentions a bunch of bootloader numbers ( I am assuming the only ones this ROM is compatible with?) So is there any way to roll the bootloader back to a compatible one or just go a different route for the custom ROM?
Also, I attempted flashing the file to update my baseband yet when I so into the device, it doesn't show as having the updated version? Is there a different way of doing it or maybe a different file?
I'm not to sure about the troubles that may come about since your gf went with the 4.3 OTA but If I am not mistaken it will need to be downgraded before you try doing anything else to it and if it is not showing that you updated your bootloader on your phone I recommend grabbing the App called Root Checker to double check then look for another file, tho unless it failed it should have updated it or messed up your phone one.
Hello everyone,
After a long fight to try and get this phone back to normal, everything seemed good,
except not really
I started on a buggy CM11 version. Sick of it, I downloaded a 4.4.4 stock rom. I had to disable firewall and defender, but I got Odin to flash my md5. I got through everything and it booted successfully. After signing in and all that jazz, I find out that my WiFi isn't working. After a few reboots, My 4G finally works and everything seems to be steady.
Then, after exploring the rest of the phone I find out that all my apps from last ROM are still there. I know that you are supposed to wipe before flashing, but I was told that Odin will take care of that. It obviously didn't.
After THAT, I try to boot into Recovery as the next sensible step is to try to wipe my data and cache. I turn the phone off and press (Vol up + Home + Pwr) and the first boot screen shows for a moment. It says in blue "RECOVERY BOOTING" in the corner. Right after, it disappears and in another second it does the same screen without the "RECOVERY BOOTING". And as presumed, it does a regular boot.
What did I miss? How can I wipe my phone from recovery? How can I fix my problem with Wifi?
Reflash in Odin.
Make sure you have the correct stock rom. If you flash the "md5" you may have flashed the wrong thing. The md5 is not tge firmware, that is just the code that verifies your firmware file is not corrupted.
If your old apps were still there, you flashed the wrong thing. There is no way to flash stock firmware in odin and not wipe the data partition.
You are correct then
Yeah, I flashed a tar.md5 in Odin. It gave me a new ROM but all my apps are there. After all that, I still can't go to recovery. I tried using the terminal and ROM Toolbox to go there, both didn't work. Can I just leave it as it is and find a way to recovery or is the only way to go to bootloader and flash a correct file to get to recovery?
Flash twrp and see if it will reboot into recovery, then factory reset and flash latest firmware with Odin right after. Odin will NOT wipe data. It has to be done manually
serio22 said:
Flash twrp and see if it will reboot into recovery, then factory reset and flash latest firmware with Odin right after. Odin will NOT wipe data. It has to be done manually
Click to expand...
Click to collapse
It depends on what you ate flashing.
If you are flashing a full stock factory image it will wipe user data. If you are just flashing a system partition it won't.
Essem G said:
Hello everyone,
After a long fight to try and get this phone back to normal, everything seemed good,
except not really
I started on a buggy CM11 version. Sick of it, I downloaded a 4.4.4 stock rom. I had to disable firewall and defender, but I got Odin to flash my md5. I got through everything and it booted successfully. After signing in and all that jazz, I find out that my WiFi isn't working. After a few reboots, My 4G finally works and everything seems to be steady.
Then, after exploring the rest of the phone I find out that all my apps from last ROM are still there. I know that you are supposed to wipe before flashing, but I was told that Odin will take care of that. It obviously didn't.
After THAT, I try to boot into Recovery as the next sensible step is to try to wipe my data and cache. I turn the phone off and press (Vol up + Home + Pwr) and the first boot screen shows for a moment. It says in blue "RECOVERY BOOTING" in the corner. Right after, it disappears and in another second it does the same screen without the "RECOVERY BOOTING". And as presumed, it does a regular boot.
What did I miss? How can I wipe my phone from recovery? How can I fix my problem with Wifi?
Click to expand...
Click to collapse
Fkash twrp and format system, data, cache and preload and install a deodexed stock os
g7755725 said:
Fkash twrp and format system, data, cache and preload and install a deodexed stock os
Click to expand...
Click to collapse
Also this. This gives you more control over the whole process
Skipjacks said:
Also this. This gives you more control over the whole process
Click to expand...
Click to collapse
How do I know whatever I download is deodexed? And I went to a page of ROMs someone gave me and I downloaded the NK2 version, which also gave me a tar.md5. If I want the correct thing to flash, what should I flash?
Essem G said:
How do I know whatever I download is deodexed? And I went to a page of ROMs someone gave me and I downloaded the NK2 version, which also gave me a tar.md5. If I want the correct thing to flash, what should I flash?
Click to expand...
Click to collapse
The first post of any customized stock rom will tell you if its deodexed. If it doesn't say it...its not.
@Essem G:
Any updates for us? I'm following this thread because I have similar problems with my WiFi not working after upgrading from 4.2.2.
Any luck getting TWRP flashed?
Also I believe that the stock firmwares do come as tar.md5's, as in the file: M919UVUFNK2_M919TMBFNK2_M919UVUFNK2_HOME.tar.md5 from ShinySide's stock firmware thread.
As for the WiFi issue, from the hours of reading I've done it looks like this problem occurs when you upgrade your firmware, but it no longer matches the bootloader. Such as bootloader (Baseband) showing MDL, but Build Number showing NH7, NK2, etc. What does your show?
This thread may be of use to you when you get back to a working ROM. Good luck!
@RavenMind1
Everyone has been saying different answers and i've put off fixing my device for a while. I'm just afraid i'll brick it forever and have another nightmare after this current one. So no, there has been no progress. I think i'm gonna try to flash Philz and format my system, then flash a deodexed rom. @g7755725 said that you can flash TWRP, but I usually use Philz. It appears to be that I have lost root access because no root features work and SuperSU won't recognize it. Will everything work or am I setting my self up for disaster?
Edit: Where can I find a deodexed rom? I desperately need one, thanks
Essem G said:
@RavenMind1
Everyone has been saying different answers and i've put off fixing my device for a while. I'm just afraid i'll brick it forever and have another nightmare after this current one. So no, there has been no progress. I think i'm gonna try to flash Philz and format my system, then flash a deodexed rom. @g7755725 said that you can flash TWRP, but I usually use Philz. It appears to be that I have lost root access because no root features work and SuperSU won't recognize it. Will everything work or am I setting my self up for disaster?
Edit: Where can I find a deodexed rom? I desperately need one, thanks
Click to expand...
Click to collapse
Look in the forums for deodexed rom theirs a bunch and untouched as well i had philz but it eoukdnt boot my s4 so i had to switch to twrp because it does better then any recovery
g7755725 said:
Look in the forums for deodexed rom theirs a bunch and untouched as well i had philz but it eoukdnt boot my s4 so i had to switch to twrp because it does better then any recovery
Click to expand...
Click to collapse
Thanks for the support so far, but has this problem occured before? do you think the steps i've listed will solve this? Im just trying to make sure that I know exactly what to do before I go in. Thanks
Essem G said:
Thanks for the support so far, but has this problem occured before? do you think the steps i've listed will solve this? Im just trying to make sure that I know exactly what to do before I go in. Thanks[/Q] it should
Click to expand...
Click to collapse
@g7755725 I downloaded a deodexed rom from the SkipJacks guy (different page than what you sent me) and it's a little under 9MB... how could this possibly be a ROM?
Essem G said:
@g7755725 I downloaded a deodexed rom from the SkipJacks guy (different page than what you sent me) and it's a little under 9MB... how could this possibly be a ROM?
Click to expand...
Click to collapse
Have you tried my gamerrom Ultimate 1 its basically stock touchwiz of if Official NK2 M919UVUFNK2 with stweaks and no bloatware here is the thread gru 1 is in.the botyom of the thread http://forum.xda-developers.com/galaxy-s4-tmobile/development/stock-os-gamerrom-ultimate-2-touchwiz-t3078467
Sounds cool but i would have been interested a few months ago. I'm trying to sell the phone so I need to get it back to stock. Appreciate all the help and I think it's cool that you make ROMs
Essem G said:
Sounds cool but i would have been interested a few months ago. I'm trying to sell the phone so I need to get it back to stock. Appreciate all the help and I think it's cool that you make ROMs
Click to expand...
Click to collapse
If you're trying to go back to complete stock then just Odin NK2 firmware. http://forum.xda-developers.com/galaxy-s4-tmobile/general/firmwares-official-mdl-mk2-nb4-t2816508 I used the NK2 from here about 2 days ago to go back to stock.