Kernel Sources released!! - Micromax Canvas A1

Let us all petition Micromax and Mediatek to release kernel sources for our device!
Head over HERE and HERE
After all, we don't just want STOCK Android L now, do we?
EDIT: So, kernel sources HAVE been pushed...See this LINK

Thank god!
this would help not only this device!
BTW do u run a private server??? such a lot of bandwidh

The_Ace said:
Thank god!
this would help not only this device!
BTW do u run a private server??? such a lot of bandwidh
Click to expand...
Click to collapse
Yup, it sure is unusual for Mediatek SoC kernel source to be released...but then, I suppose Android One is a whole new chapter, so...Yay!
(Nope, I just like showing off my super fast internet! )

Help.
The Dork Knight Rises said:
Yup, it sure is unusual for Mediatek SoC kernel source to be released...but then, I suppose Android One is a whole new chapter, so...Yay!
(Nope, I just like showing off my super fast internet! )
Click to expand...
Click to collapse
Then,Can You Mirror Me The Kernel Source?
https://android.googlesource.com/kernel/mediatek/+/android-mediatek-sprout-3.4-kitkat-mr2.tar.gz (Click On It,It'll Start Download)

Dhogaivannan said:
Then,Can You Mirror Me The Kernel Source?
https://android.googlesource.com/kernel/mediatek/+/android-mediatek-sprout-3.4-kitkat-mr2.tar.gz (Click On It,It'll Start Download)
Click to expand...
Click to collapse
That's done already.
https://github.com/varunchitre15/android_kernel_mediatek_sprout

varun.chitre15 said:
That's done already.
https://github.com/varunchitre15/android_kernel_mediatek_sprout
Click to expand...
Click to collapse
I Need It As *.zip File..

Dhogaivannan said:
I Need It As *.zip File..
Click to expand...
Click to collapse
You can download it as a zip, check the button on right bottom 'Download ZIP'

varun.chitre15 said:
You can download it as a zip, check the button on right bottom 'Download ZIP'
Click to expand...
Click to collapse
Thanks

sensor calibration
Guys do you know how to boot in to factory mode or service menu or test mode my canvas a1 sensors was not accurate how can I fix it?

Related

[DEV][BETA 2] Android ModTeam PecanICS (ICS 4.0.4)[24/09/12]

Hello guys !!! This thread is a support thread for the porting of CM9 (compiled from source) to the Optimus Me P350 (codename:pecan).
Member of Android ModTeam
tonystark88 (me)
Click to expand...
Click to collapse
STATUS OF PROJECT
Finally, after i've revritten device files and added some libraries, this rom boot. In the bottom you can see the list of releases and patches you must apply to launche a old/new release.
Click to expand...
Click to collapse
WORK
First Boot
Screen
Touch (fully works now)
Bluetooth
Audio
SD
RIL (G/3G/SMS/HDSPA)
Partial HW Acceleration
Click to expand...
Click to collapse
NOT WORK
Wi-Fi
GPS
Click to expand...
Click to collapse
DOWNLOAD AND LINKS
Beta 1:http://androidmodteam.altervista.org/cm9-for-lg-p350/
Click to expand...
Click to collapse
Official pages
Android ModTeam Official Page: http://androidmodteam.altervista.org
Official G+ Page:https://plus.google.com/u/0/111637310703918579141
Click to expand...
Click to collapse
INSTALLATION
Go in CWM Recovery
Select install zip from SD Card
Select the zip
Do a wipe data/factory reset
Flash also Screen Patch
Reboot and enjoy this first CM9!
Click to expand...
Click to collapse
GITHUB SOURCE
http://www.github.com/AndroidModTeam
Click to expand...
Click to collapse
SPECIAL THANKS
Special thanks to:
Ron G for the Kernel Sources
pax0r: for the start of development for this device
Click to expand...
Click to collapse
Tony ?? Bro in Alpha 2 is Screen fixed from source or just using Screen fix patch by vivek ?? we got HW Composer Fixed but Unable to make Gralloc work :/ Any ideas !
rom2maru said:
Tony ?? Bro in Alpha 2 is Screen fixed from source or just using Screen fix patch by vivek ?? we got HW Composer Fixed but Unable to make Gralloc work :/ Any ideas !
Click to expand...
Click to collapse
Just vivek patch for the moment
Tony can you compress your cm9 source with 7zip and upload it we guys are really in search of it as newer cm9 source no more boots on p350 plz help bro :'(
rom2maru said:
Tony can you compress your cm9 source with 7zip and upload it we guys are really in search of it as newer cm9 source no more boots on p350 plz help bro :'(
Click to expand...
Click to collapse
I'll do it tonight. Now i can't because i'm not at home.
Alpha 2 link updated
tonystark88 said:
I'll do it tonight. Now i can't because i'm not at home.
Click to expand...
Click to collapse
Really bro !!!!!!!! Will you upload you're source !!!! our Project is Stucked due to Lack of Bootable Source :'( Please Help !! Thanks dude !! We are Really Waiting for Downloads Link ! Finally P350 CM9 Project Project team will restart
Some Quotes
Tony Start ICS Era on P350
Click to expand...
Click to collapse
Tony Ended ICS Era By Him on P350
Click to expand...
Click to collapse
We Start ICS on P350
Click to expand...
Click to collapse
We Ended ICS on P350
Click to expand...
Click to collapse
Finally Second time Tony Gonna Rockzzzz
Click to expand...
Click to collapse
Please Upload source Bro we are really waiting
New release!
http://cyanoportingteam.blogspot.it/2012/09/alpha-3-in-upload.html
Bro WHen you will upload CM9 Source ? please
Link added.
http://cyanoportingteam.blogspot.it/2012/09/alpha-3-available.html
old sources
Deleted
When Device Folder and Vendors Gonna be Open Source ?
rom2maru said:
When Device Folder and Vendors Gonna be Open Source ?
Click to expand...
Click to collapse
Just now because RIL is fixed
Beta 1 in upload. Download tomorrow on the official site (new )
gee, is evolving fast this rom, congratulations tony
gabripop said:
gee, is evolving fast this rom, congratulations tony
Click to expand...
Click to collapse
The great problem when i compile for the first time this rom is the touch but thanks to Ron this issue is fixed. So now it's more easy to fix the rest
tonystark88 said:
The great problem when i compile for the first time this rom is the touch but thanks to Ron this issue is fixed. So now it's more easy to fix the rest
Click to expand...
Click to collapse
you are fixing everything very fast. but ron has already fixed GPS and wifi so now we only need is gralloc nd other small bits and speed so try to fix them
I really appreciate your fast fixing work keep it up
Beta 1 link added in the first post.
tonystark88 said:
The great problem when i compile for the first time this rom is the touch but thanks to Ron this issue is fixed. So now it's more easy to fix the rest
Click to expand...
Click to collapse
I see that there are CyanogenMod ROMS so far, the problem is the camera and wi-fi, I was told may be the sources or kernel, is it?
You might check Ron G's CM9, it has WiFi working
Sent from my LG-P350 using xda premium

help = Flashing kernel

I provide a complete folder with all downloads
please look at the following "naming conventions" for selecting
the correct image for your ROM!
Images containing "OC-UV" will have presets
Images containing "CM9" are for CM9
Images containing "CM10" are for CM10
All others are for stock (sense) ROMs
Download:
http://www.mediafire.com/?e1chs7tzcsstc
github:
https://github.com/maxwen/primou-kernel-KISS
Click to expand...
Click to collapse
do i need to download from both links , or any one?? and which one??
funrockerz said:
do i need to download from both links , or any one?? and which one??
Click to expand...
Click to collapse
It's only your choice... if you like mediafire, download from mediafire, if you like github, download from github
thanks
parkourz said:
It's only your choice... if you like mediafire, download from mediafire, if you like github, download from github
Click to expand...
Click to collapse
ya it worked , please tell me how do i overclock my cellphone now will you?
funrockerz said:
ya it worked , please tell me how do i overclock my cellphone now will you?
Click to expand...
Click to collapse
people, PLEASE!!! why won't you read carefully, use search option in threads and use "Thanks" button? :crying:
now ?
parkourz said:
people, PLEASE!!! why won't you read carefully, use search option in threads and use "Thanks" button? :crying:
Click to expand...
Click to collapse
aaye aaye captain ... how do i overclock it now?
funrockerz said:
aaye aaye captain ... how do i overclock it now?
Click to expand...
Click to collapse
SetCPU, NoFrills CPU Control or any other OC app
The higher the max cpu freq, the higher battery consuption and phone temperature

VoLTaqe Kernel

It's very hard to edit 2 thread same time We can meet on edge version thread.
Here you are;
http://forum.xda-developers.com/s7-edge/development/kernel-voltaqe-kernel-t3397545
http://forum.xda-developers.com/showpost.php?p=67291289&postcount=2
Mine too
mineee
Last
Has anyone tried this kernel?
Scandy said:
Has anyone tried this kernel?
Click to expand...
Click to collapse
Yes successfully booted and A LOT of customization there as always.
@VoLTaqe glad to see you again with same phone after s4. As always im ready for test
Wow nice kernel, good job :good:
@VoLTaqe glad to see you again with same phone after s4. As always im ready for test
Click to expand...
Click to collapse
After S4 we join all on S7 ^^
Great, phone wont boot. Says " Verification failed "
Hi,
Is your screen control like kcal?
Hi, could you add support for korean variants of S7? (G930K,S,L)
When I try to build from G930F kernel sources with defconfig modified for my device, random reboots occur when connected to USB, which drives me crazy.
Thanks in advance.
japjaan said:
Hi,
Is your screen control like kcal?
Click to expand...
Click to collapse
kcal ?
Shuuin said:
kcal ?
Click to expand...
Click to collapse
https://cdn-images.xda-developers.com/direct/3/1/9/5/2/3/1/1425543767993.jpg
Do you have any plans to bring this to the edge 935f?
japjaan said:
Hi,
Is your screen control like kcal?
Click to expand...
Click to collapse
Nope it contain only wake controls for now.
kykint said:
Hi, could you add support for korean variants of S7? (G930K,S,L)
When I try to build from G930F kernel sources with defconfig modified for my device, random reboots occur when connected to USB, which drives me crazy.
Thanks in advance.
Click to expand...
Click to collapse
You need generate and change dtb.img too.
el7145 said:
Do you have any plans to bring this to the edge 935f?
Click to expand...
Click to collapse
Yes i am when find any tester.
QUOTE=Arvis20;67238578]Wow nice kernel, good job :good:[/QUOTE]
Good using
alexofhiswalnut said:
@VoLTaqe glad to see you again with same phone after s4. As always im ready for test
After S4 we join all on S7 ^^
Click to expand...
Click to collapse
Wow glad to see you too again. Hope we can build a community there too like s4
Shuuin said:
Great, phone wont boot. Says " Verification failed "
Click to expand...
Click to collapse
Disable samsung verification nothing wrong with kernel.
If you find any problem please report.
VoLTaqe said:
You need generate and change dtb.img too.
Click to expand...
Click to collapse
Yup I changed dtb.img too and applied every ramdisk change from the original kernel. Still reboots randomly.
Btw I just flashed your kernel and it's working well on my G930K, except for dmb. Nice so far.
VoLTaqe said:
Nope it contain only wake controls for now.
You need generate and change dtb.img too.
Yes i am when find any tester.
QUOTE=Arvis20;67238578]Wow nice kernel, good job :good:
Click to expand...
Click to collapse
Good using
Wow glad to see you too again. Hope we can build a community there too like s4
Disable samsung verification nothing wrong with kernel.[/QUOTE]
Disable samsung verification, and how ?
Shuuin said:
Great, phone wont boot. Says " Verification failed "
Click to expand...
Click to collapse
Your phone is encrypted mate you need to go into recovery and format data then reflash rom and kernel
Sent from my SM-G930F using Tapatalk

[ROM][9.0] OxygenOS9.0.4 ZUK Z2/Plus ByLZY

Thanks to Erfan's GSI production, thank you very much
bug:
Personal Hotspot
- Backup your personal data (Important)
- Download the Zip
- Boot to recovery (/factory according to port)
- Restart recovery
- Wipe the System, Cache, Data and ART/Dalvik cache.
- Flash the ROM
- Flash the root solution of your choice
- Reboot your device.
ROM OS Version: 9.0 Pie
ROM Kernel: 4.4.X
The kernel comes from:Nameless
Kernel source code:https://github.com/xzr467706992/android_kernel_zuk_msm8996
ROM Firmware Required: ZUI 2.5
Based On: AOSP
Since my region is China, the screenshot is Chinese.
Screenshot:
ROM:
https://mega.nz/#!NB8hXYLb!VEhzP6JxcTpSFjOIM1MbS0aaR4ZLIWoXleEu1FvVe_Q
factory:
https://mega.nz/#!lAM0SaSA!YiY1tEVirb_-KGoEelvQqG8CyqeXFyUFiZX8rZBmdcs
Is brightness working? What about that display turn off issue on low brightness?
Screenshots plzz??
Shubhi singhal said:
Screenshots plzz??
Click to expand...
Click to collapse
Ok girl i will upload letter
Anurag151143526 said:
Ok girl i will upload letter
Click to expand...
Click to collapse
Will u still upload them.... If i tell u that m a boy.. My full name is shubham... And nick name is shubhi??
Shubhi singhal said:
Will u still upload them.... If i tell u that m a boy.. My full name is shubham... And nick name is shubhi??
Click to expand...
Click to collapse
My data pack is over
I will upload after some time
Anurag151143526 said:
My data pack is over
I will upload after some time
Click to expand...
Click to collapse
Ohhh... Earlier If i dont mention that m a boy... Then i bet u gonna. Recharge ur no. And upload the ss?
Just kidding
Shubhi singhal said:
Ohhh... Earlier If i dont mention that m a boy... Then i bet u gonna. Recharge ur no. And upload the ss?
Just kidding
Click to expand...
Click to collapse
Hehe lol
Men will be men
Shubhi singhal said:
Will u still upload them.... If i tell u that m a boy.. My full name is shubham... And nick name is shubhi??
Click to expand...
Click to collapse
I think he read it - shubi single ???
vinay069 said:
I think he read it - shubi single ???
Click to expand...
Click to collapse
Heheeh... ??
vinay069 said:
I think he read it - shubi single ???
Click to expand...
Click to collapse
:laugh::laugh:
Thanks you very much for all this flavors that you bring for our device. O hope that you will continue the development. :good:
visheshjain25 said:
:laugh::laugh:
Click to expand...
Click to collapse
Lol
The fact is everyone is laughing at my joke
But no one thanked my posts
;_;
Anurag151143526 said:
Lol
The fact is everyone is laughing at my joke
But no one thanked my posts
;_;
Click to expand...
Click to collapse
Brother,please post the screen shots and other bugs if you find except hotspot
ChetanLokhande said:
Is brightness working? What about that display turn off issue on low brightness?
Click to expand...
Click to collapse
Screen goes off on low brightness and some times screen flicks
---------- Post added at 11:39 AM ---------- Previous post was at 11:32 AM ----------
Short review
ROM is good and stable but 1st issue faced during installation it automatically turns off the device when magisk module is flashing so u have to go to recovery again and install magisk manually only after that ROM boots don't know this issue is only for me or for others too ,unable to sign in into google ,brightness issue is there and hotspot issue as described by op over all stable and good ROM to try if issues are fixed
tested
bugs:
brightness bug
hotspot bug
laggy
apps take forever to open
google play not working
vinay069 said:
I think he read it - shubi single
Click to expand...
Click to collapse
Please bro release another version of it, it doent install properly please fix the bugs like brightness and gapps related please bro.

I HAVE ROM CM12 FOR GALAXY Y

HELLO FRIENDS, I HAVE A CM12 ROM FILE FOR GALAXY Y A LONG LONG time ago.
I'm NOT SURE THIS ROM FILE WILL WORK, BUT MY FRIEND CAN BOOM ROM UP ONCE. HOPE YOUR FAVORITE, AND ROM DEVELOPERS WILL CONTINUE RESEARCH ON THIS VERSION.
Link Rom: Click here
Link Recovery flash via Odin: Click here
Unfortunately recovery doesn't work so you can find another cwm or twrp and install kernel boot and rom
Apologize for MY ENGLISH Speaks
DongSica said:
HELLO FRIENDS, I HAVE A CM12 ROM FILE FOR GALAXY Y A LONG LONG time ago.
I'm NOT SURE THIS ROM FILE WILL WORK, BUT MY FRIEND CAN BOOM ROM UP ONCE. HOPE YOUR FAVORITE, AND ROM DEVELOPERS WILL CONTINUE RESEARCH ON THIS VERSION.
Link Rom: Click here
Link Recovery flash via Odin: Click here
Unfortunately recovery doesn't work so you can find another cwm or twrp and install kernel boot and rom
Apologize for MY ENGLISH Speaks
Click to expand...
Click to collapse
it doesn't install / boot
notnoelchannel said:
it doesn't install / boot
Click to expand...
Click to collapse
I know that. My friend who has successfully booted said that because the memory of the device that can install the app is less than the rom file, it can't be booted. All you need to do is delete the app and find a suitable recovry to load the kernel
DongSica said:
I know that. My friend who has successfully booted said that because the memory of the device that can install the app is less than the rom file, it can't be booted. All you need to do is delete the app and find a suitable recovry to load the kernel
Click to expand...
Click to collapse
and can your friend show us some screenshots of the rom? XD
notnoelchannel said:
and can your friend show us some screenshots of the rom? XD
Click to expand...
Click to collapse
It's a pity that my friend no longer saved that picture. Because he successfully installed it a long time ago. I see that you are very passionate about this device, so I shared the file again, I hope you can revive the rom
notnoelchannel said:
and can your friend show us some screenshots of the rom? XD
Click to expand...
Click to collapse
you can try this LITE version. I hope this can work cm12 lite
DongSica said:
you can try this LITE version. I hope this can work cm12 lite
Click to expand...
Click to collapse
doesn't work
DongSica said:
HELLO FRIENDS, I HAVE A CM12 ROM FILE FOR GALAXY Y A LONG LONG time ago.
I'm NOT SURE THIS ROM FILE WILL WORK, BUT MY FRIEND CAN BOOM ROM UP ONCE. HOPE YOUR FAVORITE, AND ROM DEVELOPERS WILL CONTINUE RESEARCH ON THIS VERSION.
Link Rom: Click here
Link Recovery flash via Odin: Click here
Unfortunately recovery doesn't work so you can find another cwm or twrp and install kernel boot and rom
Apologize for MY ENGLISH Speaks
Click to expand...
Click to collapse
I managed to install it, but it got stuck on the logo. And I ended up harming myself because I don't have a computer to fix the device.
AlexJr135 said:
I managed to install it, but it got stuck on the logo. And I ended up harming myself because I don't have a computer to fix the device.
Click to expand...
Click to collapse
How did you install it?????
notnoelchannel said:
How did you install it?????
Click to expand...
Click to collapse
I cleaned the rom so that it fit in the device's memory. It worked, the rom installed. However, it didn't boot. It could have been the kernel, but I can't say.
AlexJr135 said:
I cleaned the rom so that it fit in the device's memory. It worked, the rom installed. However, it didn't boot. It could have been the kernel, but I can't say.
Click to expand...
Click to collapse
can you share me your "cleaned" rom?
notnoelchannel said:
can you share me your "cleaned" rom?
Click to expand...
Click to collapse
Yes I can, do you use telegram? It's easier for me to upload there. The file is weighing 100mb
AlexJr135 said:
Yes I can, do you use telegram? It's easier for me to upload there. The file is weighing 100mb
Click to expand...
Click to collapse
no, sadly I don't use telegram, can you share the link on mega.nz or mediafire.com?
AlexJr135 said:
Yes I can, do you use telegram? It's easier for me to upload there. The file is weighing 100mb
Click to expand...
Click to collapse
XDA allows you to upload 180 megabytes of .zip files to attachments
Ulumia said:
XDA allows you to upload 180 megabytes of .zip files to attachments
Click to expand...
Click to collapse
Even 200mb+ files I think
test
Checking a 400 megabyte file in an XDA attachment
notnoelchannel said:
Even 200mb+ files I think
Click to expand...
Click to collapse
notnoelchannel said:
doesn't work
Click to expand...
Click to collapse
Try agian this version: https://drive.google.com/file/d/1RH-G6mowNHySmTVAfVf8Lo_G9GWGiK7J/view?usp=sharing
notnoelchannel said:
How did you install it?????
Click to expand...
Click to collapse
Download the zip and delete a few files from apps and priv-apps (Like camera) all the not needed apps and you will have a cleaned ROM. I did it, it installed but did not boot. Maybe a kernel issue or maybe art
Ragedpixel said:
maybe art
Click to expand...
Click to collapse
ART not work on ARMv6
Ulumia said:
ART not work on ARMv6
Click to expand...
Click to collapse
exactly

Categories

Resources