Custom rom xiaomi redmi 1s indian version - Xiaomi Redmi 1S

Unbricking or installing Custom ROM on your bricked or unbricked Redmi 1s (Indian snapdragon version ) through CWM recovery.
Top 10 Features of Moded ROM (Custom_Redmi_1S_Rom_XDA_v37)
1) All bloatware were removed like Mi launcher, Mi themes, Google keyboard, file manager, weather widget and some live wall paper were removed as they were consuming much RAM.
2) Pre rooted and adblock binary installed for ad removing.
3) Added moded youtube which support HD playback and most ad gets removed.
4) Added holo launcher and multiling keyboard which consume very low ram.
5) Added UC mini browser as ther was no browser pre installed.
6) Added flash alert application for iphone like flash notification.
7) Boosted default ring tone volume by 150% as it is very slow.
8) Pre installed soft key.
9) Changed boot animation contains android logo sketch animation and it contain text “MARYAM”(My daughter name) and if you don’t like you can change this boot animation I will tell you later in thread.
10) Most of the time you get 400 – 500 MB ram free after cleaning your task manager.
Changelog in Version 37
Now your captured images and video will get saved in your Sdcard
Steps to change this setting : Goto setting -> storage -> Storage settings and choose External storage in camera option.
Step 1: download “Stock_stable_v36” or “Custom_Redmi_1S_Rom_XDA_v37” or “Stock_stable_v37” as per your requirement.
Download link for “Custom_Redmi_1S_Rom_XDA_v37.zip”
https://drive.google.com/file/d/0B6sbFLTmSeVHVXJzMFNrdUxqS0k/edit?usp=sharing
Download link for “Redmi_1S_v37.zip”
https://drive.google.com/file/d/0B6sbFLTmSeVHYUJyZDhUV2kwNHM/edit?usp=sharing
Download link for “stable-v36.zip”
https://drive.google.com/file/d/0B6sbFLTmSeVHdDRkZUNyY1ZVVmc/edit?usp=sharing
Step 2: Connect your mobile copy your ROM zip file in your SDcard1(Memory Card).
Step 3: Switch off your mobile and start your mobile in CWM recovery mode by pressing ( Volume up + Power ) key combination.
Step 4: Wipe cache partition.
Step 5: Select install zip option -> choose zip from sdcard and locate your ROM file and select that file for installation.
Step 6: wipe data/factory reset.
Step 7: Reboot system now.
Now Download link are working
:good: Like this thread if I have helped You
Free ram screenshot can be seen below

download link not working!

Camera & 3G is working???
Sent from my HM 1SW using XDA Free mobile app
---------- Post added at 04:54 PM ---------- Previous post was at 04:53 PM ----------
Also plz describe installation of cwm recovery.
Sent from my HM 1SW using XDA Free mobile app

i am using this rom only all is working fine
Sent from my HM 1SW using XDA Free mobile app

http://forum.xda-developers.com/showthread.php?t=2882369
view this above link for installing cwm recovery
Sent from my HM 1SW using XDA Free mobile app

cwm recovery of redmi 1s
azimdotnet said:
http://forum.xda-developers.com/showthread.php?t=2882369
view this above link for installing cwm recovery
Sent from my HM 1SW using XDA Free mobile app
Click to expand...
Click to collapse
which is the root folder in internal storage? where should i place the update.zip file.It could not detect the file.could you please tell me the location where to place the file

Root means your home directory of your internal storage
Sent from my HM 1SW using XDA Free mobile app

Sdcard0/update.zip
Sent from my HM 1SW using XDA Free mobile app

Storage/Sdcard0/update.zip i have attached screenshot of directory where you will put your update.zip file
Sent from my HM 1SW using XDA Free mobile app

Sent from my HM 1SW using XDA Free mobile app

twrp
i have recovery of TWRP .. can i flash with twrp ? no need of cwm only na ?

Can anybody tell me, how can I revert back to MIUI if I want to?
Also CM11 Kitkat 4.4.4 will get next updates OTA or manually we have to install it ?

Links not working. Could it be uploaded else where (like https://www.androidfilehost.com ) ??? Thanks for the share!
---------- Post added at 07:33 AM ---------- Previous post was at 07:29 AM ----------
haris5sani said:
Can anybody tell me, how can I revert back to MIUI if I want to?
Also CM11 Kitkat 4.4.4 will get next updates OTA or manually we have to install it ?
Click to expand...
Click to collapse
Check out http://en.miui.com/download-226.html on installing MIUI manually!
I doubt update might not work on this ROM. Updates have to be manual. This is a customized ROM! and probably you could revert using the above link to check for the latest ROM availability of your device and install it manually!

All about Redmi 1s rooting, custom rom installation, upgrading to kitkat
Check my other threads about Redmi 1s rooting, custom rom installation, upgrading to kitkat
Mokee ROM For Xiaomi Redmi 1S - Android 4.4.4 Indian version
http://forum.xda-developers.com/android/general/mokee-rom-xiaomi-redmi-1s-android-4-4-4-t2886275
custom cyanogenmod android 4.4 ROM for redmi 1S with preinstalled xposed framework
http://forum.xda-developers.com/android/general/custom-cyanogenmod-android-4-4-rom-t2888971
Custom rom xiaomi redmi 1s indian version
http://forum.xda-developers.com/android/general/custom-rom-xiaomi-redmi-1s-indian-t2882604
Unbrick Redmi 1s unbrick (indian version) rooting, installing CWM & custom ROM guide
http://forum.xda-developers.com/android/general/redmi-1sindian-version-unbricking-t2882369
Root redmi 1S (Indian version) with SuperSU installed (No native root method)
http://forum.xda-developers.com/android/general/root-redmi-1s-indian-version-supersu-t2881416
:good:Press :good: Thanks button if I have helped You

pracash475 said:
i have recovery of TWRP .. can i flash with twrp ? no need of cwm only na ?
Click to expand...
Click to collapse
yes you can flash with TWRP

Good work- how do we remove the Navigation bar at bottom of Screen
I've been able to download and use the ROM for the last 18+ hours and am happy with it generally. The only two issues I come across are-
The Navigation bar can't be removed
I prefer Holo Launcher HD and not the standard launcher
I was able to fix the second issue but not the first, so if you could kindly advise on how to remove the navigation bar button at the bottom of the screen, it would be really appreciated.
The ROM frees up around 270mb if I kill all running apps, I had hoped that there would be more free RAM, or may be more number of apps that could run simultaneously, but that doesn't seem to happen.
May be I'm missing something, if so, please direct me to it.
Thanks

u81 said:
I've been able to download and use the ROM for the last 18+ hours and am happy with it generally. The only two issues I come across are-
The Navigation bar can't be removed
I prefer Holo Launcher HD and not the standard launcher
I was able to fix the second issue but not the first, so if you could kindly advise on how to remove the navigation bar button at the bottom of the screen, it would be really appreciated.
The ROM frees up around 270mb if I kill all running apps, I had hoped that there would be more free RAM, or may be more number of apps that could run simultaneously, but that doesn't seem to happen.
May be I'm missing something, if so, please direct me to it.
Thanks
Click to expand...
Click to collapse
I think you can get more free ram with greenify
I obtain 390mb with greenify on miui 43
Stable 240mb free ram with more applications opened
I am using redmi 1s with miui 43 rom
So far stable and no conflict or force closed

hamonmaru said:
I think you can get more free ram with greenify
I obtain 390mb with greenify on miui 43
Stable 240mb free ram with more applications opened
I am using redmi 1s with miui 43 rom
So far stable and no conflict or force closed
Click to expand...
Click to collapse
Thanks for the response, but where can I get MIUI 43. I'm currently on the custom version at the start of this thread.
Any idea how to remove the visual navigation keys.

Remove the last line of prop.built located in system folder
Sent from my HM 1SW using XDA Free mobile app

Or use soft buttons app download from play store
I have attach screenshot of app
Sent from my HM 1SW using XDA Free mobile app

Related

[ROM] Huawei P6 MIUI V5 JB 4.2.2 Release [Update 3.11.22]

MIUI V5 JB 4.2.2 For Huawei Ascend P6​
Author: Ry09iu
Devices: Huawei P6-U06 or P6-T00
Click to expand...
Click to collapse
Things you need to know
1. Based on official firmware B117SP01, i will update to new version later
2. Use MIUI Patchrom Project, it's realy miui
3. All working, maybe have some bugs, please reply me, my twitter @Ry09iu
Click to expand...
Click to collapse
How to install
1. Install recovery by xuefy cwm-recovery installer
2. Open it and select "install recovery", you must rooted!
3. Select "reboot into recovery" to launch recovery, or press volumn keys when you rebooting
4. Select "choose zip from /mnt/ext_sdcard " to install miui rom, don't choose from sdcard/ (don't wipe data)
5. Reboot your device
Click to expand...
Click to collapse
Changelog
Sorry for my English, i used google translation...
[3.11.22]
- Update to the latest 3.11.22 MIUI code , please refer to MIUI official update log
- Removal of part of the interface pops up 2 Open Open mode selection ( ie original option removed )
- Set - LED light option to remove useless color , leaving only the green, red, yellow and green by default (thanks to Xuefy's patch provided )
- Removal Brush Script Formatting data mandatory sentences , the user can choose whether to clear the recovery of user data before the brush into a complete package ( first brush MIUI is strongly recommended to empty into operation )
- Remove the lower part of the program depends on the menu button
- Fix the problem FC probabilistic setting occurs when long press the HOME key to clean up memory
[3.11.15]
- Update to the latest 3.11.15 MIUI code , please refer to MIUI official update log
- Fix the previous version of the problem can not be replaced ringtones
- Unicom users to come and repair some electrical problems can not display the contact name ( thanks to Ron 's friendship Rone test )
- Fix the problem list China as an icon Set advanced settings display random
Note : OTA upgrade to 3.11.15 , and is not included Unicom come and repair some electrical problems can not display the contact's name , you need a complete package heavy brush , or use the RE Manager into cust / directory, files deleted unicom folder , and copy the folder to the current path channel and named unicom, then restart, so that you can solve
[3.11.8]
- Update to the latest 3.11.8 MIUI code , please refer to MIUI official update log
- Update package to the end of the latest EmotionUI B117
- Fix long press can not select text to copy and paste the problem and increase the MIUI clipboard
- Fix week millet cloud synchronization problems when WIFI set FC
- Fix Fast Software Selection Sort FC problems
- Part of the adjustment frame layer code
[3.11.2]
- Update MIUI code to latest version 3.11.1 , please refer to MIUI official update log
[3.10.26]
- Update MIUI code to latest version 3.10.25 , please refer to MIUI official update log
- Fix Millet notes, click the Clock icon FC problems
- Repair the connection does not display properly notified WIFI problem (fix reboot when you connection CMCC)
- Set - Huawei Advanced Settings option added to the original factory settings, including Dolby sound factory settings, the default memory card, display - color temperature adjustment, power management, and gloves mode option
- When you set the default storage to an external card, photo gallery home page will be displayed
- Hide desktop icons on the power management program
- Fixed system comes with recovery file path where the error will not occur again unable to restart the issue to a temporary recovery
- Full support for automatic updates OTA online, click update that you can just wait for a moment), as well as selected through system updates have been downloaded for offline upgrade package upgrade will restart automatically invoke temporary recovery brush machine, from the upgrade will be more convenient (thanks Xuefy's code provided)
[3.10.19]
- Update MIUI code to latest version 3.10.19, please refer to MIUI official update log
- Fix font problem can not be replaced
- Repair change the theme of status bar will only take effect after the restart
- Repair open handsfree mobile version of the problem can not hear caller after
- Fix Traditional display lock screen displays the date garbled
- Fix desktop clock widget displays 0 degrees Celsius weather problems
- Corrected mobile graphics machine model P6-U06 to P6-T00 ( Chinese version )
- Add Huawei Advanced settings, support the navigation bar display on and off, lock screen off network settings, engineering mode, system program to streamline functions
- Try to fix the problem Yellow Pages unresponsive, we also need to test whether the repair feedback (I tested here have no problem)
- Other code modification and finishing
[3.10.11]
1. Initial release
Click to expand...
Click to collapse
Downloads
MIUI Official :
P6U06: http://rom.miui.com/en/download/view/id/359370#top
P6T00: http://rom.miui.com/en/download/view/id/359371#top
Click to expand...
Click to collapse
Credits
1. Miui official
2. Xuefy
3. Tenfar
Click to expand...
Click to collapse
Been waiting for miui rom..thanks a lot mate..guess i need to revert back first to b114 as b118 cant be rooted.. :beer:
Btw can you provide us some screenshots mate..would like to take a glimpse..
Sent from my HUAWEI P6-U06 using Tapatalk 2
mkchan said:
Been waiting for miui rom..thanks a lot mate..guess i need to revert back first to b114 as b118 cant be rooted.. :beer:
Btw can you provide us some screenshots mate..would like to take a glimpse..
Sent from my HUAWEI P6-U06 using Tapatalk 2
Click to expand...
Click to collapse
OT:My B118 rooted fine with eRoot, just had to reinstall Superuser app.
Thanks for this ROM! Going to try it out today
Sent from my HUAWEI P6-U06 using Tapatalk 4
File size P6-U06
This can't be right.
The file is only 16.3 kb...
Edit: The file is a doc with links but the links lead to what appears to be an online shop.
aeacus said:
This can't be right.
The file is only 16.3 kb...
Edit: The file is a doc with links but the links lead to what appears to be an online shop.
Click to expand...
Click to collapse
Yup, links seem to be wrong.
Filename translated: China Aurora Blade teacher recruitment exam video courses. Rar
Edit: Link found from an other thread http://pan.baidu.com/share/link?uk=2936987094&shareid=2423249551
Sent from my HUAWEI P6-U06 using Tapatalk 4
That is great, that it my favorite ROM. Thanks.
I have one question, how I can revert to stock Huawei ROM if it necessary?
Thanks in advance!
whatsapp + play store = not working at all
I don't mind about whatsapp but play store is a deal breaker
Sent from my HUAWEI P6-U06 using Tapatalk 4
What version of firmware i need to install this ? I m currnetly on b117 of chinese....
Sent from my P6-U06 using xda premium
This rom is great, please, translate to spanish, congratulations
Is this version only support chinese language?
Sent from my HUAWEI P6-U06 using xda app-developers app
Im pretty sure i already made a compatible GAPPs for the P6. I'll upload it when i get to my computer.
Looks like your using my modified recovery installer? Haven't checked the recovery itself but the installer is my translated version.
Can anyone please confirm what languages does this ROM include?
Heres a mirror hosted in USA - http://dl.huaweinews.com/index.php?dir=Roms/Ascend-P6/&file=miui_p6u06_3.10.11_kjqvk609mo_4.2.zip
aeacus said:
I don't mind about whatsapp but play store is a deal breaker
Sent from my HUAWEI P6-U06 using Tapatalk 4
Click to expand...
Click to collapse
By default there is no Play Stare and other Google's apps with it. You may flash additional gapps from goo.im.
Sent from my P6-U06 using Tapatalk 4
---------- Post added at 11:45 PM ---------- Previous post was at 11:43 PM ----------
frdan said:
whatsapp + play store = not working at all
Click to expand...
Click to collapse
Whatsapp not working here as well. I rely on whatsapp as most my friend using it. Not sure if it's only happens with this rom or general problem to MIUI v5?
Sent from my P6-U06 using Tapatalk 4
---------- Post added at 11:48 PM ---------- Previous post was at 11:45 PM ----------
Ruchira88 said:
Can anyone please confirm what languages does this ROM include?
Click to expand...
Click to collapse
Chinese and English. Not sure about the others.
batja2 said:
Is this version only support chinese language?
Sent from my HUAWEI P6-U06 using xda app-developers app
Click to expand...
Click to collapse
Sent from my P6-U06 using Tapatalk 4
The app Whatsapp not work
frdan said:
whatsapp + play store = not working at all
Click to expand...
Click to collapse
Just flash this: Gapps
Dopiii said:
Just flash this: Gapps
Click to expand...
Click to collapse
tnx dude , play store is back but whatsapp still stopped , I'm thinking back to b118 :crying:
frdan said:
tnx dude , play store is back but whatsapp still stopped , I'm thinking back to b118 :crying:
Click to expand...
Click to collapse
Do i need to install b116sp01 rom before installing this rom ?
Sent from my P6-U06 using xda premium
hannanzikrea said:
Do i need to install b116sp01 rom before installing this rom ?
Sent from my P6-U06 using xda premium
Click to expand...
Click to collapse
no

Lewa Os LATEST for FLY F53s

Lewa Os V5 for FLY F53s
I tried My best for this Rom as no was was coming forward for development of this phone. I am happy for myself and for you all having this phone.
Based on latest stable release 14.01.10.
Some screenshots. (DOWNLOAD Below)
DOWNLOAD
Nearly all bugs are flushed out. Some chinese apps. May be uninstalled.
Also, Carliv Touch Recovery and TWRP Recoveries ported by me are available. (Prefer: TWRP)
CTR Recovery
http://forum.xda-developers.com/attachment.php?attachmentid=2728552&d=1399367749
TWRP Recovery
http://forum.xda-developers.com/attachment.php?attachmentid=2728592&d=1399370731
Thanks if Liked !
TWRP For Fly F53s
TWRP For Fly F53s
DOWNLOAD
dep2477 said:
Lewa Os V5 for FLY F53s
I tried My best for this Rom as no was was coming forward for development of this phone. I am happy for myself and for you all having this phone.
Based on latest stable release 14.01.10.
Some screenshots. (DOWNLOAD Below)
DOWNLOAD
Nearly all bugs are flushed out. Some chinese apps. May be uninstalled.
Also, Carliv Touch Recovery and TWRP Recoveries ported by me are available. (Prefer: TWRP)
CTR Recovery
http://forum.xda-developers.com/attachment.php?attachmentid=2728552&d=1399367749
TWRP Recovery
http://forum.xda-developers.com/attachment.php?attachmentid=2728592&d=1399370731
Thanks if Liked !
Click to expand...
Click to collapse
Buddy plz tell me if everything is going good in this rom
It looks so good n I want to try it on my phone
Thnx
Sent from my GT-N7100 using XDA Premium 4 mobile app
I am using it. Flawless till now.
Sent from my Fly F53s using XDA Premium 4 mobile app
Can you send me the installation instructions of lewa os 5..please need urgently..
manoj36 said:
Can you send me the installation instructions of lewa os 5..please need urgently..
Click to expand...
Click to collapse
Have you installed Custom recovery
If yes then copy the zip into sd card. Enter into TWRP recovery and
1. Factory/Data reset.
2. Install zip from sd card.
3. wipe dalvic cache
4. reboot into LEWA OS
If not clear then use this guide: Guide TWRP USE
I don't know to install custom recovery.. How to do it.. Which flash installer to be used. Please tell
Use SP Flash tools or if u r rooted use mobile uncle app to update recovery from SD card.
Sent from my Fly F53s using XDA Premium 4 mobile app
Hi guys ! How is the ROM working. If some of you have installed it. Thanks needed for my hard work.
Sent from my Fly F53s using XDA Premium 4 mobile app
Thank you sir I have installed lewa o's.. It working very fine and smoothly.. And the best part is its look that is awesome. I need one help that I uninstalled phone.apk and phone/sms storage by mistake.. Now sim management not working.. Can you help me somehow..
wo wo wo wow...i flashed it again with ur rom..now its working fantastically.. all my probles cleared...all the credits goes to u..thank u so much...its awesome rom..will be waiting for ur coming modifications... thank u
If you have uninstalled phone.apk and phone/sms storage by mistake from the Lewa OS then you must reset the phone or you have to again flash the OS Zip.
ya i flashed it with ur os zip..its working now..thanks..but am facing many battery issues its not getting charged soon ..its taking about 5-6 hours to charge and even with reboot at about 30% of battery is lost..
In power options try to calibrate battery when full.
Sent from my Fly F53s using XDA Premium 4 mobile app
STOCK FIRMWARE F53s Version 3
STOCK FIRMWARE F53s Version 3
DOWNLOAD
:good: HIT THANKS AND ENJOY !
NEW 4.2.2 SAMSUNG Galaxy S4 ROM
SAMSUNG Galaxy S4 ROM
4.2.2
A very light weight and fast rom. No Google apps. Pre-rooted
DOWNLOAD LINK
Patch
Based on ROM LENOVO S890 MOD SAMSUNG S4 SUPER COPY: Credits : Afeeandro
Porting for Fly F53s Credits : Dep2477 i.e. Me !
I need Thanks Guys more and More !:good:
Installation Instructions:
Same as the previous ROM.
But install Patch after immediately after flashing the Galaxy S4 Rom. Then erase dalvic cache.
Reboot and Enjoy and don't forget to thanks.
wt are the steps of patching
---------- Post added at 12:04 PM ---------- Previous post was at 11:56 AM ----------
is kitkat rom is also available for this phone..??? want to c kitkat in my mob..waiting eagerly thank u..
I will post the link of the guide for porting ROMs. Regarding kitkat; I am also searching to port one for this device.
wt are the steps to install patch???
Same as installing ROM. I.e install via cwm or twrp
Sent from my Fly F53s using XDA Premium 4 mobile app

[4.4.4] MIUI [4.9.5][AOSP Omni based]

Well everyone probably already knows I hate doing OP's so they stay pretty simple and this wont will be any different.
This is ported from the N7100 which is based on Omni rom. Original rom is located here
http://en.miui.com/download-35.html
and is the one by mdiary. So far only issues I know of it call recorder does not work (just says being used by another app) and you have to go into settings..mobile networks..network mode and change to CDMA+LTE/EvDO to enable 4g after every boot. If you flash any gapps package you will lose gps. I am working on a special version but it is not ready just yet.
So I took the base and turned it into a full featured rom with a whole mess of add-ons and tweaks.
Included items/tweaks/mods
Adfree (although I already have a host list created)
dolphin browser
dolphin jetpack plugin
adobe flash 11.1 kk
es file manager
LG G3 Keyboard and a few themes
WSM (MIUI Xposed)
Mi-Tools module (like wanam or gravity box)
Paid themes module (all miui themes are free)
AOSP Dash Clock widget
AOSP Calender widget
Terminal emulator
A bunch of build.prop tweaks
A bunch of init.d scripts (to enable them you need to use a root browser and edit /system/etc/init.d.cfg change from false to true to enable that script)
Bug list
MIUI-l900 4.9.5
Any Omni bugs
call recording does not work
If you flash any gapps besides mine you will lose gps
Change Log
MIUI-l900 4.9.5 9-8-14
First port of rom
Downloads
Flashing instructions
1. Backup internal sdcard to you PC or external sdcard (this will really help prevent issues
2. Boot into recovery and backup current rom
3. Do a factory reset (if using philz/cwm do clean for new rom)
4. Format/wipe internal sdcard (if you dont do this and have issues first thing I will say is format it)
5. Reboot back into recovery (this will create your internal sdcard dir structure)
6. Flash MIUI and boot it
7. After initial setup power off and boot into recovery
8. Flash Gapps (please do it in this order or you will end up wiping and reflashing)
9. Boot into rom
10. Go to post #3 and follow those steps
Do not flash any kernel besides the modified Plasma or your rom wont boot. If there is an AOSP kernel you want to use let me know and I will make it compatible. This goes for the dual boot kernel (for now anyways).
MOD EDIT: Removed
Simple things for now
1. Open security (located on first screen)..permissions.. and turn on root permission
2. Open WSM tools (miui xposed) and click install DO NOT reboot yet
3. At top of the screen you will see < Manage click here and enable all three modules
4. Reboot phone and setup Mi-Tools to your liking and reboot for settings to be applied
5. Open settings... general settings tab... mobile networks... network mode... set to CDMA+LTE/EvDO (will have to do this every boot to have 4g(LTE)
6. If you want to use a different launcher ( I dont like the iOS style launcher myself ) open settings... general settings... display... default launcher.. and select launcher3 or whatever you have installed yourself
7. Setup your google account and enjoy
Some things are in Chinese
in settings... general settings.. stock settings you will see two chinese options the top one is your advanced settings for samsung devices the bottom one is your Mi-POP settings (that circle with the back icon)
BELOW IS A NICE GUIDE FOR MIUI
http://www.hardwarezone.com.sg/m/feature-complete-guide-xiaomis-miui-v5-os
Things that can cause issues
If you are having gps issues try this
travisn000 said:
I have been using Maverick Pro from the play store and find it gets GPS lock with google maps from play store also installed... Once maverick has a lock other apps seem to work as well.
Here is the free version:
https://play.google.com/store/apps/details?id=com.codesector.maverick.lite
..i set my location setting to device only; the first time i used it it took a few minutes to lock, but its been very quick every time since.
The yellow dotted indicator in the bottom bar of the app shows number (16) of gps satellites found:
Click to expand...
Click to collapse
Themes that cause issues (random reboots, freezes, etc...)
material
First
Sent from my SM-N900P but looks Moar like a S5
Man i can't wait to flash this.
Thanks
Gonna try it out
---------- Post added at 04:31 AM ---------- Previous post was at 03:39 AM ----------
Ok got it going everything seems cool except no google play or gmail and my contacts couldn't be transfered... Can't wait til its fully done.
hondafreak513 said:
Gonna try it out
---------- Post added at 04:31 AM ---------- Previous post was at 03:39 AM ----------
Ok got it going everything seems cool except no google play or gmail and my contacts couldn't be transfered... Can't wait til its fully done.
Click to expand...
Click to collapse
Go to xiaomi market and download Google installer. You can install gapps from there, and gps will still work.
Got a flashable package but not uploaded yet. Thanks for the info. Guess I wont upload now and just post your info in the op instead.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Thank you!
First page. Can't wait!
Sent from my SPH-L900 using Tapatalk
Lol!! Nope second page. Cant wait for what? This thing runs great even if it only took a few hours to do. Links are up and ready for use.
Sent from my SPH-L900 using XDA Premium 4 mobile app
jdee323 said:
Go to xiaomi market and download Google installer. You can install gapps from there, and gps will still work.
Click to expand...
Click to collapse
Ok flashed this again I really want this to work but I can't get the google stuff to work and how do I get my contacts. And It won't mount my sdcard.
hondafreak513 said:
Ok flashed this again I really want this to work but I can't get the google stuff to work and how do I get my contacts.
Click to expand...
Click to collapse
In op follow the link to the verizon version. There are better instructions and a link to a special gapps for miui. I will be updating our op with the same ifo later today.
Sent from my SPH-L900 using XDA Premium 4 mobile app
jlmancuso said:
In op follow the link to the verizon version. There are better instructions and a link to a special gapps for miui. I will be updating our op with the same ifo later today.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
ok thanks
---------- Post added at 05:02 AM ---------- Previous post was at 04:59 AM ----------
Ok it takes me to some weird MIUI page
hondafreak513 said:
ok thanks
---------- Post added at 05:02 AM ---------- Previous post was at 04:59 AM ----------
Ok it takes me to some weird MIUI page
Click to expand...
Click to collapse
Link on post 3 not post 1
Sent from my SPH-L900 using XDA Premium 4 mobile app
gahhhh sorry I'm so tired I need to sleep
hondafreak513 said:
gahhhh sorry I'm so tired I need to sleep
Click to expand...
Click to collapse
Yeah know the feeling past few days (5 to be exact) I have gotten 10 hrs sleep. Had a break in my schedule to knock out a bunch of stuff but didnt have the time to sleep.
Sent from my SPH-L900 using XDA Premium 4 mobile app
jlmancuso said:
Link on post 4 not post 1
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Post 4? I don't see a link there.
Is the correct link on Post 2? Maybe I'm missing something...
cobb_cruiser said:
Post 4? I don't see a link there.
Is the correct link on Post 2? Maybe I'm missing something...
Click to expand...
Click to collapse
No he meant post 3... But anyways everything is up and running great so far.. Loving this rom and it seems like the battery life is going to be great, I will update more later on the day when I put more use on it.. Thanks JL your hard work is really appreciated...

[Updated English Version]Working dual-boot aroma installer

[2015/02/15] The author released 1.3 update with English language support on weibo. Post on miui forum did not updated yet but maybe you need instructions there to try it.
Original post: http://www.miui.com/thread-2248022-1-1.html (including a video)
The dev's weibo: http://www.weibo.com/u/1048297887
It's an very early version so the install procedure looks a little bit complex, and the data is not shared between two systems. But I tried it half an hour ago and it really works, so I'm a mokee +miui 6 user now.
Unfortunately it's all in Chinese so most of you guys are unable to use it right now, but at least it proved dual boot is technically possible. So you should hope a dev who does not speak only Chinese is interest in dual boot and working on it.
Click to expand...
Click to collapse
Okay I talked him he is ready to convert his firmware Chinese to English but needs some time. Its really helps to world wide users if he translate it.
So far I'm able to get dual system working with Mk+miui only...finding way to install other Roms!! ;0 .. can't understand even after using google translate
pawanzZ said:
So far I'm able to get dual system working with Mk+miui only...finding way to install other Roms!! ;0 .. can't understand even after using google translate
Click to expand...
Click to collapse
it is hard to understand the procedure even after using Google translate... how did you manage to get it working..
I can't find the download, can you uploaded here , and little help with the translate of how to .
Mohanshbhr said:
it is hard to understand the procedure even after using Google translate... how did you manage to get it working..
Click to expand...
Click to collapse
It is simple first have to brush(flash) hm1s sysrec.zip and then hm1s sysmenu.zip ...which is a kind of aroma installer ...there comes a bit confusion ..so follow this pattern: press blue highlighted button and tick chech box, press 1st opt , again 1st opt, again 1st opt until it shows a blue highlited button ..press it ..then recovery gets rebooted ..indicating dual system partitions made...now flash mk+miui.zip...ur done! Now switch btwn os using system changer app..
Caution:using dual system wipes ur internal memory!!!
multirom is ported to moto e, wish we have also this goodness , love to have miui and cm in multirom format.
pawanzZ said:
It is simple first have to brush(flash) hm1s sysrec.zip and then hm1s sysmenu.zip ...which is a kind of aroma installer ...there comes a bit confusion ..so follow this pattern: press blue highlighted button and tick chech box, press 1st opt , again 1st opt, again 1st opt until it shows a blue highlited button ..press it ..then recovery gets rebooted ..indicating dual system partitions made...now flash mk+miui.zip...ur done! Now switch btwn os using system changer app..
Caution:using dual system wipes ur internal memory!!!
Click to expand...
Click to collapse
Is it for global version ?
Sent from my Redmi 1S using XDA Free mobile app
as9333 said:
Is it for global version ?
Sent from my Redmi 1S using XDA Free mobile app
Click to expand...
Click to collapse
It will work on any version,global or Chinese, but the system changer text is in Chinese (you just need to follow instructions)
press thanks if i helped you
Hsmetric181 said:
It will work on any version,global or Chinese, but the system changer text is in Chinese (you just need to follow instructions)
press thanks if i helped you
Click to expand...
Click to collapse
Didn't find the download links
Where r they ?
Sent from my Redmi 1S using XDA Free mobile app
Kexce boot patched kernel is what we need
as9333 said:
Kexce boot patched kernel is what we need
Click to expand...
Click to collapse
yes but only a kernel dev can do this, i hope some dev will bring multiboot to our device, there are to many rom including miui but can't install beacuse of after instakk configuration.
can someone, from the ones that downloaded, give a download link so we may try to test this one (or destroy our 1s)? thanks
Anyone tried multirom app?
It can patch kexec boot patch ?
Sent from my Redmi 1S using XDA Free mobile app
Okay English version released grab it here:
http://pan.baidu.com/s/1qWDN5u8
Can we use combination of any Roms?
Does it wipe internal emmc ?
Any way redmi is unstoppable now it got all the mods
Great job to all developer
And coming devs
Sent from my Redmi 1S using XDA Free mobile app
how does it work? does it share data n system partitions?? where do data n system partitions of 2nd system get allocated?? please someone write proper english instructions with explanation n download links...
dhrtlockeroo9 said:
Okay English version released grab it here:
http://pan.baidu.com/s/1qWDN5u8
Click to expand...
Click to collapse
You gave a link,i have downloaded it,my question is what to do with the zip file?
plz rpl procedure if u know
How to revert back to original system..means how to remove this dual boot system...?
Try using unbrick tutorial
Did u try multi boot?
Then did it wipe internal SD?
Sent from my Redmi 1S using XDA Free mobile app

Get Google Assistant

This is a simple tweak to get google assistant working on your device.
Note: This tweak only works with devices running android 7.0 and above. So, if you flash on a lower version and screw your device, I'm not responsible. Do it at your own risk!!!
So all you have to do is add a piece of code to your build.prop
Here's the code:
Code:
ro.product.model=Pixel XL
ro.opa.eligible_device=true
Reboot your device and we're done. Google Assistant is ready to serve you.
Note:You must have google app installed on your device and move it to /system/app
Screenshots:
Nougat is in early stage so I know most of Redmi 1s users still using marshmallow, so I share to you how to get Google Assistant in Lollipop and Marshmallow.
You need Xposed Framework and Assistant Enabler module. Just enable the module and you are good to go.
Sent from my HM 1SW using Tapatalk
vhick said:
Nougat is in early stage so I know most of Redmi 1s users still using marshmallow, so I share to you how to get Google Assistant in Lollipop and Marshmallow.
You need Xposed Framework and Assistant Enabler module. Just enable the module and you are good to go.
Click to expand...
Click to collapse
Yes bro I agree with you! I used android N-ify in marshmallow which has most of the nougat features including google assistant.
Sent from my armani using XDA Labs
Not working
saurabhrakshak said:
Not working
Click to expand...
Click to collapse
Did you follow all the steps I mentioned?
Sent from my armani using XDA Labs
vicky romero said:
Did you follow all the steps I mentioned?
Click to expand...
Click to collapse
Yes
I have google app installed and pixel launcher is running in my redmi 1s (7.1)
Paste code in build.pro
Download apk and paste it to system/app
Restart
Long press home button starts google now
saurabhrakshak said:
Yes
I have google app installed and pixel launcher is running in my redmi 1s (7.1)
Paste code in build.pro
Download apk and paste it to system/app
Restart
Long press home button starts google now
Click to expand...
Click to collapse
Clear the data of google app and try once again or else move the google app to /system/priv-app
Sent from my armani using XDA Labs
vicky romero said:
Clear the data of google app and try once again or else move the google app to /system/priv-app
Click to expand...
Click to collapse
Tried everything but not worked for me...
How move app to system?
saurabhrakshak said:
Tried everything but not worked for me...
Click to expand...
Click to collapse
Update the app from Play store.
---------- Post added at 05:08 PM ---------- Previous post was at 05:05 PM ----------
Viral1996 said:
How move app to system?
Click to expand...
Click to collapse
You can use Lucky Patcher, select the app then tap on "Move to /system/app"
mayank11280 said:
Update the app from Play store.
Google app (6.8.21.21) updated
Click to expand...
Click to collapse
saurabhrakshak said:
Google app (6.8.21.21) updated
Click to expand...
Click to collapse
It should work then, even I had the same issue but after updating, it's working like a charm.
Have you moved Pixel Launcher to system apps?
Did you update Google App from 3rd party or from Play Store?
mayank11280 said:
It should work then, even I had the same issue but after updating, it's working like a charm.
Have you moved Pixel Launcher to system apps?
Did you update Google App from 3rd party or from Play Store?
Click to expand...
Click to collapse
Play store
Anyone tell me step by step procedure from very beginning
It says no space available when I try to convert it to system app. What should I do ?
I am using cm 14.1 (fefi ) version
saurabhrakshak said:
Play store
Anyone tell me step by step procedure from very beginning
Click to expand...
Click to collapse
What I did was :
Install Pixel Launcher, move it to system.
Install Google App, move it to system
Update Build.prop
(I used Kernel Adiutor to update it, Open KA, goto Buil prop Editor, click on that small (+) symbol, select "Add", in "Key" add the name like "ro.xxx.xxx" and in value "Enable" and enter both the attributes. Done there.)
Restart
Update Google App from play store.
---------- Post added at 12:25 AM ---------- Previous post was at 12:18 AM ----------
Yash_DEEMO said:
It says no space available when I try to convert it to system app. What should I do ?
I am using cm 14.1 (fefi ) version
Click to expand...
Click to collapse
You can uninstall (delete) useless system apps from /System/App and /System/Priv-App since the memory allocated to the system is really small in your case mostly, changing which is really a tedious work to do.
You can do:
Install Google Keyboard and delete default Keyboard (folder named as LatinMe)
Remove FM Radio
Remove "AntHAL" if you don't use fitness devices
Remove CM File Manager, instead you can use ES File Explorer Pro
Install Chrome and remove default Browser.
Yash_DEEMO said:
It says no space available when I try to convert it to system app. What should I do ?
I am using cm 14.1 (fefi ) version
Click to expand...
Click to collapse
What gapps did you use bro! Use open gapps pico version. I was left with some 70 mb of system space after I flashed it (without removing any apps).
vicky romero said:
What gapps did you use bro! Use open gapps pico version. I was left with some 70 mb of system space after I flashed it (without removing any apps).
Click to expand...
Click to collapse
I couldn't even install newer version of open gapps so I had to flash another one (which I don't know from where I got it) and I also installed pixel launcher in the system.
---------- Post added at 05:14 AM ---------- Previous post was at 04:56 AM ----------
mayank11280 said:
You can uninstall (delete) useless system apps from /System/App and /System/Priv-App since the memory allocated to the system is really small in your case mostly, changing which is really a tedious work to do.
You can do:
Install Google Keyboard and delete default Keyboard (folder named as LatinMe)
Remove FM Radio
Remove "AntHAL" if you don't use fitness devices
Remove CM File Manager, instead you can use ES File Explorer Pro
Install Chrome and remove default Browser.
Click to expand...
Click to collapse
I uninstalled some system apps and tried to make Google app as system app and it failed again. And when I checked my root directory it was full (only leaving 4bits)
i Got it working even with screen off using the xposed module assistant enabler on latest RR build.
not able to flash nano gapps due to linsufficient storage, so flashed pico
1. flashed the cm 13 bloatware removal zip - http://forum.xda-developers.com/mot...systemless-t3351040/post69709349#post69709349
2. flashed the google app zip from the nougat thread- http://forum.xda-developers.com/android/software/guide-how-to-enable-google-assistant-t3477879
foollow the steps specified in the module.
everythong works well even with SCREEN OFF
vinaysp said:
i Got it working even with screen off using the xposed module assistant enabler on latest RR build.
not able to flash nano gapps due to linsufficient storage, so flashed pico
1. flashed the cm 13 bloatware removal zip - http://forum.xda-developers.com/mot...systemless-t3351040/post69709349#post69709349
2. flashed the google app zip from the nougat thread- http://forum.xda-developers.com/android/software/guide-how-to-enable-google-assistant-t3477879
foollow the steps specified in the module.
everythong works well even with SCREEN OFF
Click to expand...
Click to collapse
Tell us if you had it working on cm 14 and above roms. Coz this tweak is exclusively for android 7.0 and above
vicky romero said:
Tell us if you had it working on cm 14 and above roms. Coz this tweak is exclusively for android 7.0 and above
Click to expand...
Click to collapse
I don't know about cm14 as I'm still on RR marshmallow. And I've mentioned only to flash Google app not other files from that thread
Sent from my HM 1SW using XDA-Developers mobile app

Categories

Resources