Hello,
can you please help me bring my LG G2 D802 back to life?
I had problems with GPS on LG G2 D802 4.4.2 so i tried to go to 4.2.2.I had some experiences with flashing from previous phones so I though I will be able to perform also this one.
I followed http://forum.xda-developers.com/showthread.php?t=2797190.
I stopped on 61% on mobile and 53% on tool. Then i used official LG tool, to recovery, but it stopped on 31% or so. Then i used different FW - with this i could get on 100% mobile - but only 89% on LG flash tool. Then I download official LG firmware according IMEI, but unfortunatelly I was again not successful and was not able to get into download menu. When i connected my phone to PC, i got many pop up windows asking to format many various disk on phone.I was not able to get into recovery mode to perform HW reset.
So i decided to to use instructions from: http://forum.xda-developers.com/showthread.php?t=2582142 with help of mine who is Linux expert.
After this I again get only LG logo when i start phone, and im able to go to recovery mode. I also can start HW reset, but it is doing nothing, just showing: performing hw reset. When I connect phone to PC even that it is switched off (it looks like that) it starts and stop on LG logo, but PC cannot see it. Also it sems, it cannot be found under linux as well.
Please help me.
Thank you very much
Tomas
please help
hello, please anybody help me. Currently when i connect mobile to PC/Mac it is not recognized. Is there some way how to solve this?
many thanks
Tomas
Related
Hi there,
i rooted my G3 using Towelroot and all worked fine.
Today i installed the actual Version Xposed Framework and after rebooting it entered a Bootloop.
So i tried to Hard Reset my G3 but when i confirm it the Android with the Gaers show up for a second and then my G3 keeps showing the LG Logo for a few Minutes till i disassamble the Battery.
Next step i try is to flash a firmware in Download mode, but i cant get the Drivers to work... =(
Someone have some hints for me?
patrickn2282 said:
Hi there,
i rooted my G3 using Towelroot and all worked fine.
Today i installed the actual Version Xposed Framework and after rebooting it entered a Bootloop.
So i tried to Hard Reset my G3 but when i confirm it the Android with the Gaers show up for a second and then my G3 keeps showing the LG Logo for a few Minutes till i disassamble the Battery.
Next step i try is to flash a firmware in Download mode, but i cant get the Drivers to work... =(
Someone have some hints for me?
Click to expand...
Click to collapse
Have you choosen ART modality?
If i would say "what the hell is that" ... would u slap me?
No.. i dont have chosen that..
Bigger problem is that i dont get any usb driver working for firmware update in Download mode.. =(
OK... i managed to get the drivers working.
But further Problem ist now that im not able to flash anything on my device...
Neither the TOT Method, nor updating with the Original LG Support Tool is working...
Support Tool tells me my Model Number and that my Version is most actual.
If i update anyway it stucks at 4% and tell me it cant connect.
TOT Tool tells me that my Version Number is not correct... but it is..
With the KDZ Update Tool it stucks at 4% like the Original method.
Same problem here
Any one can help us?
Solution
Hi there,
the Problem was my PC...
I was on a Windows 8.1 64bit.
Switched to a Win7-PC and all is working fine.
You should try to use the Original LG cable, or another "Original" Cable and connect it to a USB-Port on the Back of your PC (directly to the Mainboard)
On a blank Win 7:
- I installed the LG PC Suite
- Updated the PC Suite
- Connected my LG in Download Mode
- Let the PC install all drivers,
- Disconnected the Phone
- Downloaded the actual LG Mobile Support Tool
- Let the Support tool do the work
After this i got my first OTA Update and its working like a charme
Hello Community,
Yesterday my G3 stucked in a Bootloop without changing anything. Than I wanted to repair it with the LG PC Suite. This failed with the message "Assert" multiple times. Now it stucks in the download mode. Can I repair it? More important are the files on the G3. Is there a way to get them?
PJF16 said:
Hello Community,
Yesterday my G3 stucked in a Bootloop without changing anything. Than I wanted to repair it with the LG PC Suite. This failed with the message "Assert" multiple times. Now it stucks in the download mode. Can I repair it? More important are the files on the G3. Is there a way to get them?
Click to expand...
Click to collapse
Try this:
1) Remove battery
2) Hold down the power button for 30 seconds with the battery out
3) re-insert battery
4) Try turning it on again.
If that doesn't work, do a hard reset. You can find multiple posts on how to do it. Hope this helped!
Maybe I can help somebody with the same problem. I solved the problem with the following steps:
I setted up a new Windows 7 x64 PC. It must be Windows 7!!! No Windows 8 or other shiny things.
Installed the driver
Flashed a compleltely new firmware (.tot) over the old (!) FlashTool.
Hi guys. First, sorry my poor english. I'm Brazilian.
I make a firmware upgrade from LG PC Suite, 4.4 KK to 5.0 L. Problem is, the upgrade failed, and now my LG G3 are stuck in download mode. I try make this upgrade from LG Flash Tool but the problem persists, 65% appears in the screen of LG G3 a message "ASSERT" and reboot to download mode screen. Help, please?
plyndagos said:
Hi guys. First, sorry my poor english. I'm Brazilian.
I make a firmware upgrade from LG PC Suite, 4.4 KK to 5.0 L. Problem is, the upgrade failed, and now my LG G3 are stuck in download mode. I try make this upgrade from LG Flash Tool but the problem persists, 65% appears in the screen of LG G3 a message "ASSERT" and reboot to download mode screen. Help, please?
Click to expand...
Click to collapse
Although I have never come across this, using this site to download the right KDZ and using this thread to flash that KDZ may solve your problems. There is no harm done in trying this and you can be sure that it is the right file.
LG G3 Boot problems after download mode
Hello!
Sorry revive the topic but it was the only one who found a similar problem, after searching lot on google.
I have a LG G3 D855P. Yesterday he went out and restarted many times, but worked for a short time.
I can use the BoardDiag, but when I restore the D855P20C_00.kdz .kdz, to reach 36%, the cell phone goes off and does not return. I need to take the battery cable, so that it returns to the download screen, but still, to get 36% he goes again. Have made sure that the .kdz file works properly.
I followed the tutorial presented in this video.
/watch?v=gHAA5e2FQbU[
/watch?v=YsGHRKNT8EM
Porfavor guys, I'm desperate.
kernel adiutor. turn off cpu2 and 3. (notice it starts like CPU0,CPU1,CPU2,CPU3) you will thank me later.
let the 2475mhz max speed. set it on boot.
PJF16 said:
Hello Community,
Yesterday my G3 stucked in a Bootloop without changing anything. Than I wanted to repair it with the LG PC Suite. This failed with the message "Assert" multiple times. Now it stucks in the download mode. Can I repair it? More important are the files on the G3. Is there a way to get them?
Click to expand...
Click to collapse
Good day fellow XDA users!
I've been playing with my Lg v410 and as you could have guessed - bricked it (while trying to install a rom
The problem: The phone is not booting further the LG logo and the android install
I've tried:
1. Doing a hard-reset, didn't work. After getting to the hard-reset screen - I double-confirm the reset and then nothing happens (waited for about an hour and a half).
2. Entering download-mode, didn't work. It shows the "download mode" logo but nothing happens.
3. Connecting to PC, fast-boot, adb of LG Tool can't "see" the device.
Any suggestions?
Thanks in advance
There is no .kdz released for the V410 (thanks AT&T) so download mode is kind of useless. People have tried the LG mobile support tool with the tablet in download mode, some report it is detected. However, the support tool just says you have the most recent firmware and won't restore the tablet; it is worth a try but unlikely to help.
The only way I've heard of anyone recovering from breaking the V410 to the point where all you have working is download mode is by sending the tablet to LG and having them reflash it.
You can't blame LG for this, they've released firmware for the V400 and by all accounts support it fairly well. It is some kind of AT&T thing; same with some other AT&T branded devices I have. They won't let OEMs release the firmware for devices they peddle.
Your best bet to support this tablet yourself is to nuke the laf partition and enable fastboot (since download mode is useless). At least that way you have a shot at flashing a new recovery or other stuff if something goes wrong.
Good luck. Sorry I don't have any better ideas. At one point I researched a method to create a .kdz from images of a working tablet to deliver with the LG tools, but if it is possible at all, it is beyond my developer skills.
Om it's way to LG for a reflash.
Hello,
I had rooted and then installed free gee app.
Managed to install a cyanogenmod 12 version on my LG but while rebooting i was unable to type my phone pin , the screen just went popping . with another sim card with no code pin , the apps seem to work well ...
I then decided to revert back to a custom rom from LG ; While using LG flash tools, at 98% of the flash, the phone just suddenly went blank.
When i charge there are no lights and it's impossible to get download mode.
I brought the phone to a shop and the technician told that he could not download anything to the phone and was proposing me to send it to "LG" with additional fees without any warranty of recovery.
i have read on the different threads but so far i have not found any solution , all suggestions are welcome
Thanks.
Hello,
When i connect my phone to my windows PC, a device QHSUSB_DLOAD appears but i can't manage to assign a driver to this device though i manage to install the unified LG windows driver.
When i launch LG flash tools, the program is aborted because the phone is not visible.
Looking forward to a repair procedure wit the local LG center.
Thanks for any help.
Hi !
I'm having a big problem right now. Few days ago, I tried to Root my phone everything was fine. The next day I wake up and go on my phone and there is a boot loop when I try to open it and it never ends. It's a loop at the LG life's good logo.
Few things I tried so far before coming here:
1) I tried all this :
http://forum.xda-developers.com/showthread.php?t=2785089
When I do it with LG Flashtool 2014 it goes to 4% then it stops/crash.
When I try with LGFlashTool I get : Model Information: Check FAIL! (but I put the good model in the files)
2) I tried a hard-reset but when I do the hard-reset it goes back right away to the Boot loop.
3) I tried with LG PC Suite, but the it says Mobile Device not found so I can't get it to repair with LG PC Suite.
I don't know what to do anymore.
My phone is a LG G3 D852 (Canadian)
Hopefully you guys can help me out here. Thanks a lot
Well apparently doing it on another computer fixed the problem!