To anyone more of an expert than myself on these matters (which I presume to be a large portion of users here), I'd greatly appreciate any help that can be provided. I'd also like for this thread to be a central collection of baseband/modem functions, behaviors, troubleshooting, etc...
I've had a T-Mobile S4 (SGH-M919) for a while now and have mostly used CyanogenMod derived ROM's and as of lately, more Google Play Edition/Nexus type ROM's (which generally appear to be written for the international i9505 and hence show the model number of my phone to be such; this may or may not be relevant). All of the sudden, the other day during a phone call I received, there was no audio on either end of the call. I couldn't hear the caller nor could the caller hear me. This also happens if I initiate the call. I know for a fact that the media speakers (speakers used during speakerphone) as well as the earpiece speaker are perfectly functional so it's not a case of hardware failure where it works on Bluetooth or speakerphone only. As soon as a call initiates, you hear no ringing or audio once the caller answers other than the tone when the call ends/disconnects. First thing I tried was switching from ART back to Dalvik just for the sake of troubleshooting. Second, I tried clearing the cache (and Dalvik, just for the hell of it). Still no success. So next I try a completely different ROM. I was presently on a GPE ROM with the Samsung kernel so I switched to plain CyanogenMod with a custom kernel. I even went back to a stock ROM! No success either way!!
It was at this point I decided that it had to be a hardware/firmware issue since the issue remained when changing ROM's so I naturally assumed baseband/modem. I don't understand why this issue just magically occurred one day when I hadn't changed anything, but I thought that if I reflashed a clean modem image or and updated one, then maybe it would fix it... I was on MDL so I reflashed the MDL modem. No success. Then (and here's where I f****d up), I tried flashing what I THOUGHT was a stock NB4 firmware file in ODIN. Turns out that despite being labeled as stock, it had a custom kernel built-in and tripped my KNOX counter (FFFFFUUUUUUCCCCCKKKK!!!) Well, since I really only intend to use AOSP/CM based ROM's, it's not such a huge deal for me but still, it sucks.
Here's where I had a break: Yesterday, I tried flashing the MDL modem again, then that didn't work so I tried flashing the MK2 modem. I booted up, made a call, and it worked! First time! Well, that was short lived success because I tried another call immediately after to verify and it started all over again. Now, even reflashing MK2 won't get it to work even once like it did this one time.
Does ANYone who understands baseband and modem firmware much better than I do have any insight or instruction on what I can do? Because of this one issue, I have an otherwise perfectly good S4 that I can't use just lying around. I've had a Nexus 5 for almost a year and love it but I just destroyed the screen after a drop the other day and wanted to switch to the S4 temporarily until the Nexus 6 comes out. ANY IDEAS????
Loss of call audio occurs when your rom and firmware versions dont match. Since you've tripped your knox counter, you have some more freedom now. I think you should (after someone confirms) use the samsung pc software to do a full restore of your phone. It will blow away everything you have and install the latest firmware and matching rom as if you were stock and accepted all otas. Then you can root, flash recovery, flash rom, restore backed up apps. You'll have the cleanest possible setup. Just wait for someone to confirm because i haven't been following closely in the past few months. Alternatively you can find the latest firmware and do it with odin but in your position theres no advantage to doing it piece-meal like that (unless i've missed something in the past few months) because you've already tripped knox
faiyo said:
Loss of call audio occurs when your rom and firmware versions dont match. Since you've tripped your knox counter, you have some more freedom now. I think you should (after someone confirms) use the samsung pc software to do a full restore of your phone. It will blow away everything you have and install the latest firmware and matching rom as if you were stock and accepted all otas. Then you can root, flash recovery, flash rom, restore backed up apps. You'll have the cleanest possible setup. Just wait for someone to confirm because i haven't been following closely in the past few months. Alternatively you can find the latest firmware and do it with odin but in your position theres no advantage to doing it piece-meal like that (unless i've missed something in the past few months) because you've already tripped knox
Click to expand...
Click to collapse
Thanks for the response! This was actually the approach I initially wanted to take when reflashing just the modem didn't work; that is, using Samsung Kies to do a complete Samsung official firmware download and restore. Unfortunately, every time ibtry and do the "emergency recovery" as they call it, once I type in my serial number and model like the app requires, it always tells me that the device is not supported! It's like the device's firmware has been programmed as another that isn't recognized by Samsung. At first I thought it was because I was on a custom ROM and it didn't recognize the software. I remember a while back I needed to do an official restore and I had to get the phone boot loader to read status "Samsung Official" and not just official. I actually put stock everything back on manually and got those status fields to read Samsung Official for the binary and kernel but it still won't restore with Samsung's software. It's my estimation that Samsung has now integrated the Knox counter into their software support. I'm assuming that with that sensor tripped, I can never be "official" and therefore supported again. That's why I've been doing everything Odin. With all of this in mind, do you have any other recommendation? I'll look a little further into the problems I've had with Kies and maybe why I can't restore in the meantime but otherwise, why do you think flashing MK2 modem worked for just ONE call and then stopped again? And why do you think that the issue just suddenly happened in the first place without a software change?
thair7391 said:
Thanks for the response! This was actually the approach I initially wanted to take when reflashing just the modem didn't work; that is, using Samsung Kies to do a complete Samsung official firmware download and restore. Unfortunately, every time ibtry and do the "emergency recovery" as they call it, once I type in my serial number and model like the app requires, it always tells me that the device is not supported! It's like the device's firmware has been programmed as another that isn't recognized by Samsung. At first I thought it was because I was on a custom ROM and it didn't recognize the software. I remember a while back I needed to do an official restore and I had to get the phone boot loader to read status "Samsung Official" and not just official. I actually put stock everything back on manually and got those status fields to read Samsung Official for the binary and kernel but it still won't restore with Samsung's software. It's my estimation that Samsung has now integrated the Knox counter into their software support. I'm assuming that with that sensor tripped, I can never be "official" and therefore supported again. That's why I've been doing everything Odin. With all of this in mind, do you have any other recommendation? I'll look a little further into the problems I've had with Kies and maybe why I can't restore in the meantime but otherwise, why do you think flashing MK2 modem worked for just ONE call and then stopped again? And why do you think that the issue just suddenly happened in the first place without a software change?
Click to expand...
Click to collapse
A few notes: i have a similar problem in the last few months. After about 12 hours of uptime i cannot hear the other caller. I thought it's because im using ****ty roms from these forums so i was about to go to the international forums and flash theirs. I only use touchwiz roms so far. And it manifests about a week after flashing the rom. And i have to reboot twice a day to keep it functioning So yeah.. i get it too even tho i had a matching baseband
I think the reason you tripped knox wasnt because of the kernel. It's because a stock firmware package will upgrade your bootloader, while you should have actually been pursuing a modem-only package to flash with odin (which preserves the MDL bootloader and prevents tripping knox).
Anyways, im not sure what you have done with the "Samsung offical" status or modifying the identifiers of the phone but i was pretty sure kies would restore it. If not, then you should be trying to flash stock firmware (full) for NH7 firmware which was released recently. Not just modem only, which is what some of the packages here contain (meant for people with MDL bootloaders who dont want to trip knox). Try to pursue the full firmware odin flash. Im pretty sure that would do it for you. It should be the full-on samsung stock.
About kies: i haven't used it but i've experienced weird things happen with adb and specific usb cables and usb ports on the computer, even with nexus devices. I hate to suggest this but try a different computer and different usb cable. Its an actual solution thats worked before. It messed me up before and a number of other people. Make sure its up to date too i kinda recall old versions had a compatibility issue
faiyo said:
A few notes: i have a similar problem in the last few months. After about 12 hours of uptime i cannot hear the other caller. I thought it's because im using ****ty roms from these forums so i was about to go to the international forums and flash theirs. I only use touchwiz roms so far. And it manifests about a week after flashing the rom. And i have to reboot twice a day to keep it functioning So yeah.. i get it too even tho i had a matching baseband
I think the reason you tripped knox wasnt because of the kernel. It's because a stock firmware package will upgrade your bootloader, while you should have actually been pursuing a modem-only package to flash with odin (which preserves the MDL bootloader and prevents tripping knox).
Anyways, im not sure what you have done with the "Samsung offical" status or modifying the identifiers of the phone but i was pretty sure kies would restore it. If not, then you should be trying to flash stock firmware (full) for NH7 firmware which was released recently. Not just modem only, which is what some of the packages here contain (meant for people with MDL bootloaders who dont want to trip knox). Try to pursue the full firmware odin flash. Im pretty sure that would do it for you. It should be the full-on samsung stock.
About kies: i haven't used it but i've experienced weird things happen with adb and specific usb cables and usb ports on the computer, even with nexus devices. I hate to suggest this but try a different computer and different usb cable. Its an actual solution thats worked before. It messed me up before and a number of other people. Make sure its up to date too i kinda recall old versions had a compatibility issue
Click to expand...
Click to collapse
So quick update/reply, I just stumbled upon a stock, lightly modified MK2 ROM flashable through recovery that I had buried on my microSD and decided to give it a go (since the MK2 modem was the only one that every gave me any success even though it was just one time, and even though the ROM I was using was custom so couldn't have really matched ANY Samsung baseband). Even though I really already knew and understood everything you told me, you were brilliant to remind me about the need for the modem to match the OS when it initializes. After booting up the Stock MK2, calls are now working, and consistently!!! Now I'm making a backup (just in case, even though I really don't want to use stock) and then I'm going to go for a custom ROM again, probably CM based. Thanks again for your help!
I know exactly how I tripped the Knox counter. I downloaded a firmware file that was LABELED as a stock NB4 ROM and that wasn't correct. It was a stock NB4 ROM with a MODIFIED CUSTOM KERNEL! That would have been a useful detail beforehand...
I'm also familiar with using adb and it's selectivity with USB cables. They need to be "fastboot" cables which usually only is the case with manufacturer included cables. Using Kies to restore firmware to a phone though should have nothing to do with fastboot or adb. First off, you don't need the adb Runtime or SDK to use Kies nor does Samsung include it in the installation. Second, when you're using Download mode, that's Samsung's proprietary software using their own proprietary API's and commands to communicate and interface directly with their hardware so I think the issues I've had with Kies is something else. I appreciate the suggestion though.
As far as the matching modem and software goes, I'm a bit confused... Why is it that you can use custom ROM's non-related to Samsung after updating your baseband if the custom ROM isn't matching that firmware? Perfect example, just now... I tried the stock MK2 and it worked. Now I just finished loading clean CyanogenMOd, and it worked! BUT - only one and a half times... It went through once, I tried again, and then it stopped mid ringing of the call, now doesn't work. AHHHH!!! How am I supposed to do this? And why did I never have trouble in the past? Once I get a stock ROM and matching, working modem installed, what am I supposed to do from there if I want to switch to a CM based ROM?
thair7391 said:
So quick update/reply, I just stumbled upon a stock, lightly modified MK2 ROM flashable through recovery that I had buried on my microSD and decided to give it a go (since the MK2 modem was the only one that every gave me any success even though it was just one time, and even though the ROM I was using was custom so couldn't have really matched ANY Samsung baseband). Even though I really already knew and understood everything you told me, you were brilliant to remind me about the need for the modem to match the OS when it initializes. After booting up the Stock MK2, calls are now working, and consistently!!! Now I'm making a backup (just in case, even though I really don't want to use stock) and then I'm going to go for a custom ROM again, probably CM based. Thanks again for your help!
I know exactly how I tripped the Knox counter. I downloaded a firmware file that was LABELED as a stock NB4 ROM and that wasn't correct. It was a stock NB4 ROM with a MODIFIED CUSTOM KERNEL! That would have been a useful detail beforehand...
I'm also familiar with using adb and it's selectivity with USB cables. They need to be "fastboot" cables which usually only is the case with manufacturer included cables. Using Kies to restore firmware to a phone though should have nothing to do with fastboot or adb. First off, you don't need the adb Runtime or SDK to use Kies nor does Samsung include it in the installation. Second, when you're using Download mode, that's Samsung's proprietary software using their own proprietary API's and commands to communicate and interface directly with their hardware so I think the issues I've had with Kies is something else. I appreciate the suggestion though.
As far as the matching modem and software goes, I'm a bit confused... Why is it that you can use custom ROM's non-related to Samsung after updating your baseband if the custom ROM isn't matching that firmware? Perfect example, just now... I tried the stock MK2 and it worked. Now I just finished loading clean CyanogenMOd, and it worked! BUT - only one and a half times... It went through once, I tried again, and then it stopped mid ringing of the call, now doesn't work. AHHHH!!! How am I supposed to do this? And why did I never have trouble in the past? Once I get a stock ROM and matching, working modem installed, what am I supposed to do from there if I want to switch to a CM based ROM?
Click to expand...
Click to collapse
I really have no idea about aosp roms for this device because i only used touchwiz to keep samsung features.. so i have no knowledge about firmware compatibility. I would think the creator of the rom should specify any firmware requirements.
On the thought of hardware failure, and i know you said the speakers work, but did you test the sim card slot? Perhaps it needs to be cleaned? Maybe the sim card is partially failing so try a different card? Maybe you cut it and it's loose (you wont believe the crooked sim cards i've seen). I think it's worth pursuing since you said it worked once and not again.. maybe you had just taken the cover off while flashing stuff and touched/pressed it but it's losing contact again after flexing during use. I dunno dude, the kind of call audio issues i've had were always resolved with a reboot & making sure the modem matches the touchwiz build.
Please make sure you are running a full stock firmware package & keep the touchwiz rom consistent with it. Some firmware packages are partial components
So now I've just updated to a FULL STOCK NH7 firmware package. My build number and baseband are matching. NO CALL AUDIO!!
For starters, up until a few days ago, I ran all types of ROM with an MK5 boot loader and 3 different modems and never had a call issue. After that said, I read a few months ago about a guy had your same issue. He ended up getting a new sim card and he got is audio back. He also had reception issues before getting the no audio issue.
thair7391 said:
So now I've just updated to a FULL STOCK NH7 firmware package. My build number and baseband are matching. NO CALL AUDIO!!
Click to expand...
Click to collapse
Try flashing the firmware again, some have to flash it twice for the bootloader to update, which may the trouble. If that doesn't work try a new sim like it was suggested before me
I know it's been a while but I basically gave up and just recently came back to it. I've since bought a Nexus 6 so it's not a priority issue anymore however I would still like to fix this otherwise perfectly fine Galaxy S4 that I have lying around! I seemed to believe that there was a special combination of custom ROM and specifically the MK2 modem that would sometimes cause the audio to intermittently work but it appears I was wrong. I flashed the full stock NH7 firmware/baseband etc back to my phone twice as suggested and NY audio worked! For a few calls that is... Then it stopped working again. Sometimes I could clear cache and reboot and it would work! Once or twice anyways before crapping out again... The bottom line is that there isn't a pattern aside from a cleared cache that makes the audio work again before it stops soon after which unfortunately leads me to believe it's a deep rooted hardware issue in the baseband itself. Anyone else have ideas?
Other than trying a new sim, I can't really think of anything else except to make sure the bootloader really did update. Download Samsung phone info from play store and check bootloader info to make sure it was updated to NH7
Unfortunately it is completely updated. I tried a new SIM and everything works still except audio in phone calls, including ringing. I guess it's hardware... Guess now I just have an internet browsing MP3 player with web browsing capabilities.
Related
Hey guys,
I've been working on rooting the new Captivate Glide, and unfortunately my kernel flash with ODIN failed (inexplicably). Now the device is complaining I need to perform an emergency recovery, but of course the device isn't listed in the KIES panel.
Apologies if this is covered elsewhere, but I searched and didn't find anything.
Can anyone explain how KIES works? What is a recovery code? Do I need to get one from Samsung? Is there any other way to force it to perform the recovery on my semi-bricked phone?
Wrong forum ...
There isn't a forum for him yet, so this is the best he could do.
Try going to download mode and flashing again! Try again, until it works, redownload the kernel.
Sent from my SGH-I897 using xda premium
Actually, strangely enough ... I entered 3e recovery (out of desperation) and rebooted, and it cleared the flag, allowing it to boot up normally.
I checked the kernel timestamp (cat /proc/version) and it appears to still be the stock kernel, so the NAND update completely failed.
I still would like to figure out how to force a KIES recovery, but at least for the moment I'm back up and running (till I take my next shot ).
Kies is garbage, don't worry about it.
It's just like Odin only there are a retarded amount of checks to make sure it's a supported phone...which usually fail if you're on anything other than stock or your imei has changed to a generic one, or any other reason it wants to make up to fall.
To root you should be able to flash the fugu kernel, which will cause a bootloop, then flash that stock kernel again, then once that boots you should have root.
studacris said:
Kies is garbage, don't worry about it.
It's just like Odin only there are a retarded amount of checks to make sure it's a supported phone...which usually fail if you're on anything other than stock or your imei has changed to a generic one, or any other reason it wants to make up to fall.
To root you should be able to flash the fugu kernel, which will cause a bootloop, then flash that stock kernel again, then once that boots you should have root.
Click to expand...
Click to collapse
Frustrating. The n900 flashing tool was so excellent (and cross-platform). Wonder why Samsung would release such a piece of junk.
Anyway, I'm back in business now and still working on it.
I'd love to try one of the other kernels, but since I don't have any recovery path (stock kernel / image / firmware), I'm really nervous now.
Here's the situation,
My USB port has failed. I am unable to charge my phone or connect to my computer via USB. I have tried multiple USB cables, chargers and computers without any luck. I have insurance with sprint, but I am under the impression I need to revert to a stock rom (without root) in order to qualify. Here in lies the problem! I am unable to connect to odin to perform the one-click exe. that I am familiar with. I have mobile odin pro, as well as dropbox, but I am very unfamiliar with how to revert with these programs. I have read a number of threads trying to figure out the best way to go about this, but I am unsure on the order in which I need to proceed to avoid bricking my phone.
I thought about just bringing my phone in as is and seeing if they would replace it, but right now I have the yellow caution triangle at bootup, the binary counter says 1, and I am running andriod 4.2.2. I am worried that if they say I voided the warranty, I will be unable to get the phone repaired.
Right now the phone is working without any other problems, until the battery dies (25% left) and I can't charge it (again). I am running the following setup:
Baseband version: S: D710.10 S.FL24
Kernel version: 3.0.64 -CM-g31f128d, [email protected] #1
CyanogenMod version: 10.1-20130705-unofficial-d710
Build number: cm-d710-userdebug 4.2.2 JDQ39E eng.dastin1015.20130705.092856 test-keys
I also have CWM-based Recovery v6.0.3.3, but like an idiot I apparently did not create a backup before flashing 4.2.2
Questions
Can I complete a one-click exe. with mobile odin that will revert me to stock?
Which one should I choose?
Do I need to DL and install a different bootloader, modem, kernel, etc before completing the one-click?
I am still a rookie when it comes to flashing, but I am able to follow instructions well. Any advice one what steps to take is greatly appreciated!
I would not flash with that little amount of battery left. I would do one of two things. Get an external charger and flash back to stock(gb27 stock unrooted), can be flashed with MO, or flash triangle away and take it into the Sprint store. If you have more than one Sprint store in your area, I'd try the latter first, but that's just me. And one clicks install everything, modem, kernel, etc.
Sent from my SPH-D710BST using xda premium
So I decided to go with the external charger. After I had a battery that had some life again, I called sprint to switch back to my GS2 from a pile of crap flip phone I am using. Unfortunately, the sequence of numbers they told me to get the pop-up screen would not work. I assume that is because I am running 4.2.2 with the cyanogenmod phone rather than the standard dial-er. Is there anyway around this or should I just flash my device back to stock and start over from scratch? Thanks
Matt
memogensen said:
So I decided to go with the external charger. After I had a battery that had some life again, I called sprint to switch back to my GS2 from a pile of crap flip phone I am using. Unfortunately, the sequence of numbers they told me to get the pop-up screen would not work. I assume that is because I am running 4.2.2 with the cyanogenmod phone rather than the standard dial-er. Is there anyway around this or should I just flash my device back to stock and start over from scratch? Thanks
Matt
Click to expand...
Click to collapse
I would try flashing back to stock and then retrying the sequence. From what I've heard in regards to AOSP ROMs, you can't do things like update your PRL or activate that device for a mobile carrier (although i may be wrong about the latter)
If you're still having trouble with your USB cable i would suggest looking into Mobile Odin for flashing a stock kernel and firmware. You can check the second post of the Mobile Odin thread for instructions on how to do it, and if you're still unsure about the process you can drop a question in that thread and have it answered there.
EDIT: It seems that this thread sounds like some problems you're experiencing with your USB port. As for the Sprint Activation you may have to revert to a stock ROM/kernel, but you can try the method listed in that thread and hopefully it would work out and allow you to connect through USB
Hi,
I'm fully aware of how silly it is to be in this situation. I opened a thread thinking it was in the T-Mobile S3 forum and flashed the downloaded ROM. But regardless, I made an unfortunate mistake.
The ROM was Stockdroid 4.4.2 from the i9300 forum on this site. My phone is a T999v S3. Before beginning any flashing, I rooted and ran Odin to install Philz Touch 6 recovery and "T999VVLUEML2_T999VYVLEML2_T999VVLUEML2_HOME.tar.md5". I was bouncing around firmwares looking for something that could fix the "Camera Failed" error (front camera works when charging but not anywhere else, any advice on that would be greatly appreciated), and I guess I lost track of exactly what I was downloading.
Anyway, after flashing the ROM the phone will not boot, and is almost completely unresponsive. The only life I can get out of it is when I connect it to the computer before taking the battery out, then putting it back in. A red light will shine at some point during that. In device manager the S3 is listed as QHSUSB_DLOAD. This leads me to think I can make use of one of the debricking tutorials on this site for the t999v.
The phone is a 16gb model, but I don't have a 16gb card. Before I go out and buy it, I want to know if buying it should solve the problem. I've read the debrick solution will not work with a 2gb card, but I tried anyway with no luck.
If it does work, great. If not, is my only other solution sending the device in for JTAG?
Thanks in advance for any and all help. I know this problem has been an impossible amount of times, but I wanted to pose the issue specifying the exact scenario I'm dealing with.
Yes the De-Brick thread under Developement will/should work. Make sure there is an image for your variant on that thread, before you buy the SD Card.
Once you successfully De-Brick, I will help with the Camera issue. Its pretty easy to fix in most cases.
Great, thank you!
I'll get back today on whether or not the method ends up working. The debrick image I've been using on my 4.4.2 T999v (on Windmobile) was from this thread:
http://forum.xda-developers.com/showthread.php?t=2439367
As for the Camera issue, should I start a new thread, or can I go ahead and post here?
That's correct thread for your Image. Just be sure you grab for T999V. There are other T-Mo variants too.
For the Camera, continue here when done De-Bricking.
Hi, I just got back and loaded the image on a 32GB microsd. The phone booted up just fine!
I followed the rest of the guide and attempted to reinstall the "T999VVLUEML2_T999VYVLEML2_T999VVLUEML2_HOME.tar.md5" file using ODIN, but it failed during the process. What do I do from here? I would like to be able to use the phone without the 32gb card being taken up like this. Should I try installing a 4.3 ROM of some sort?
Edit: Tried it again and the flash was successful. Just about to install a recovery image, but assuming the install went well I'm guessing I am brick-free? Thank you for the help, Perseus71.
I'll update my post if I run into any other problems regarding the brick, but for now what should I be doing with the camera issue?
I've tinkered a bit with the camera firmware with no luck, and have flashed 4.3 stock again with no luck. What should I do to resolve this issue?
Good to have it back from Brick.
As to Camera, do you still see the Camera Failed issue ? Particularly on the Stock Camera from the 4.3 you just flashed ?
DO NOT use 3rd Party Camera apps until this issue is resolved.
Perseus71 said:
Good to have it back from Brick.
As to Camera, do you still see the Camera Failed issue ? Particularly on the Stock Camera from the 4.3 you just flashed ?
DO NOT use 3rd Party Camera apps until this issue is resolved.
Click to expand...
Click to collapse
Good to know, I'll refrain from using third party camera apps. And even after flashing the above firmware it says Camera Failed.
The problem started on stock 4.3 before any ROM installing/rooting occurred. I tried the obvious clearing app cache, factory reset and wiping dalvik cache, but no luck. Since then I've been installing different ROMs and Camera Firmwares (ZDFE02, ZDFI02, etc), and moving around and setting permissions for SlimISP bin files. I know the rear works when it's being charged, and that the front camera works just fine. I just don't know what I can do to get it working. I've read that replacing the camera itself may not even fix the problem.
Yes I'd say wrong firmware is the Cause. Typically when you do Factory Reset, wipe /data and then Flash the complete firmware image in Odin, it should work. Usually it will contain the correct firmware.
So even though you flashed the image as part of De-Brick process, I suggest do the Odin Flash again. Make sure to do Factory Reset first. When finished, boot to Stock Recovery and wipe Dalvik and Cache.
When phone boots, try Camera by itself before you enter your Google account.
Perseus71 said:
Yes I'd say wrong firmware is the Cause. Typically when you do Factory Reset, wipe /data and then Flash the complete firmware image in Odin, it should work. Usually it will contain the correct firmware.
So even though you flashed the image as part of De-Brick process, I suggest do the Odin Flash again. Make sure to do Factory Reset first. When finished, boot to Stock Recovery and wipe Dalvik and Cache.
When phone boots, try Camera by itself before you enter your Google account.
Click to expand...
Click to collapse
Alright. I flashed the 4.3 image mentioned above with Odin, no problems there. Before flashing I did a dalvik/cache wipe and Factory Reset. When finished, I booted to Stock Recovery, but there was only an option to wipe Cache. Instead I opted to both wipe Cache and do another Factory Reset.
Unfortunately I booted the phone up again, skipping the connect to Internet and Google options, and went directly for the Camera App. I still receive the Camera Failed error.
What should I do from here? Does this mean the Camera itself is faulty? And will replacing it actually solve the problem (or could it be a mainboard issue)?
Also the Camera Firmwares currently on are as follows:
Rear
Camera - ZDFE02
Phone - ZDFI02
Front
Camera & Phone - S5K6A3
Probably a firmware issue, but could be hardware. ZDFE02 is the version your rear cam is currently using. ZDFI02 is what is included with the firmware build you are currently on. Back on ICS, we could update this ourselves, but Samsung has since locked that down. If you could find a way to write the newer version from Phone to Cam it might help, but i don't know of any way to do this anymore.
You said you've been installing different roms and cam firmwares. How were you going about that?
Sent from my SM-N900T using Tapatalk
DocHoliday77 said:
Probably a firmware issue, but could be hardware. ZDFE02 is the version your rear cam is currently using. ZDFI02 is what is included with the firmware build you are currently on. Back on ICS, we could update this ourselves, but Samsung has since locked that down. If you could find a way to write the newer version from Phone to Cam it might help, but i don't know of any way to do this anymore.
You said you've been installing different roms and cam firmwares. How were you going about that?
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
For ROMs I would simply boot into a custom recovery and flash them, along with kernels, heeding any warning signs in threads. I wouldn't run into any errors, and could swap between 4.3 and 4.4.2 without issues. I didn't extensively test out the ROMs, but it seemed fine.
For Camera Firmware, on a StockMOD 4.3 ROM I dialed *#34971539# to get into the CameraFirmware menu. From there I could write new firmware depending on the SlimISP bin file transferred to the internal root. I can't remember thinking back if the Camera firmware actually changed when I did this, but the Phone firmware did (or maybe vice versa, I'll try again -- I know there was a change after writing).
So I do remember reading you can't downgrade lower than 4.3, that must be true then? If I could go down to ICS I could force the Camera Firmware to change?
What's the target Camera Firmware here? Does it need to be the same as the Phone Firmware (i.e. ZDFI02)?
ZDFI02 is newer. You'd need to do the Phone to Cam F/W Write operation.
I also wondering if maybe the files in /system/etc/cameradata folder are the wrong ones. Been a while, but I think that's where you should find some camera files that should match the name if the firmware versions mentioned above.
Maybe some one can confirm this....
I not sure if you flash an ICS rom if it'll work. Might be worth a shot though.
Sent from my SM-N900T using Tapatalk
DocHoliday77 said:
ZDFI02 is newer. You'd need to do the Phone to Cam F/W Write operation.
I also wondering if maybe the files in /system/etc/cameradata folder are the wrong ones. Been a while, but I think that's where you should find some camera files that should match the name if the firmware versions mentioned above.
Maybe some one can confirm this....
I not sure if you flash an ICS rom if it'll work. Might be worth a shot though.
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
Could I use the ZDFI02 firmware from this thread?
http://forum.xda-developers.com/galaxy-s3/general/jb-4-1-2-camera-driver-t2006128
I'll find a way to get the Camera Firmware to ZDFI02 and get back to your both.
I going to guess that using that would be ok, but I cannot say for sure since it is for the I9300, which is a very different device from ours.
Sent from my SM-N900T using Tapatalk
Well, I loaded StockMOD 4.3 back on, and while it enables me to write Camera Firmware (no longer greyed out), the Camera Firmware will not change from ZDFE02 to ZDFI02. Do you have any suggestions as to what I can do to get around this? Will downgrading to ICS lead me to another brick?
It shouldn't brick. Can't think of any reason it would. Stability might be more of an issue though.
Sent from my SM-N900T using Tapatalk
Alright, I've loaded on a 4.0.4 ICS ROM. When I input the *#34971539# code, I get the error "Unfortunately factory test has stopped."
Now that an ICS ROM has been loaded, what is the method for flashing the ZDFI02 firmware to CAM?
It was using the dialer code. I guess that since it's an ICS app trying to make changes to your 4.3 firmware it's running into compatibility issues. It sounds like you are doing it correctly, just the versions must be too far apart....apologies for putting you through the hassle of doing all that. It was the best thing I could think to try though. If I think of any other ideas I will certainly let you know. There might be a way to load it using terminal emulator, but I've no idea how you would go about that.
Only other thing would be to try and edit the code of the Factory Test app on 4.3 to enable the Phone to Cam F/W Write option. I had looked into it briefly back on 4.1.2, but Im too much of a novice when it comes to java. I'd still love to know if it's even possible though. We were able to enable JB camera features before the official release by doing the F/W write, so you never know when that could happen again!
Sent from my SM-N900T using Tapatalk
---------- Post added at 09:34 PM ---------- Previous post was at 09:32 PM ----------
It's another sort of shot in the dark, but you could try replacing the camera module. Find a YouTube video showing the S3 disassembly, it really not that difficult, and you can find the camera module online fairly cheap.
Sent from my SM-N900T using Tapatalk
t999
hi friends
my s3 sgh-T999 is bricked:crying:
i can access downloading mode but when i try to put phone in recovery mode phone just show robot logo for a second then restart
i tried every solutions(flash recovery,flash stock or any other roms and ...) here but nothing changed
sometime phone boot and some chines words appear with one button !!
*odin 307 detect phone
http://forum.xda-developers.com/attachment.php?attachmentid=2668840&stc=1&d=1396652278
thanks
If you can get in download mode and it is seen by odin, flash the latest firmware.
Sent from my SM-N900T using Tapatalk
This is NOT ROOTED. Its the original TAR file for people who need an Emergency Recovery for their phones, and don't want to wait hours for it to download from slow file hosts.
Edit: New link added 6/21/16
Download Link: Google Drive
Do NOT rename the tar file, it may cause Odin to fail the md5 check.
Code:
(N910PVPU3BOF5_N910PSPT3BOF5_N910PVPU3BOF5_HOME.tar.md5)
Instructions:
1. Download and Extract tar above and download Odin
2. Put phone into download mode (power off, then power button + Volume Down, then volume up when prompted)
3. Open Odin (right click > open as administrator)
4. Load stock tar into the PDA slot
5. Start flashing
6. Grab some popcorn because it will take a while
7. Profit
@random45, PSA: more direct link available here - http://forum.xda-developers.com/showpost.php?p=61880147&postcount=14
itskapil said:
@random45, PSA: more direct link available here - http://forum.xda-developers.com/showpost.php?p=61880147&postcount=14
Click to expand...
Click to collapse
That is not for the Note 4...
random45 said:
That is not for the Note 4...
Click to expand...
Click to collapse
@random45 Corrected.. ! pls check now.
Here's the OF5 TAR: http://www.theandroidsoul.com/download/download-sprint-galaxy-note-4-update-n910pvpu3bof5/
I just used this and it worked flawlessly. Thank you.
Thanks alot
This link is dead, it's actually deemed "dangerous", which of course is crap... Does anyone have a link to this firmware?
grmcrkrs said:
This link is dead, it's actually deemed "dangerous", which of course is crap... Does anyone have a link to this firmware?
Click to expand...
Click to collapse
No but the next update up though
http://forum.xda-developers.com/showthread.php?t=3250864
Sent from my Not4 Mod using Tapatalk
Does anybody still have this firmware version available? The latest marshmallow updates are destroying Galaxy phones left and right with no solution other than paying Samsung to fix the problem and waiting 2 weeks without your device.
random45 said:
This is NOT ROOTED. Its the original TAR file for people who need an Emergency Recovery for their phones, and don't want to wait hours for it to download from slow file hosts.
Download Link: MediaFire
Do NOT rename the tar file, it may cause Odin to fail the md5 check.
Code:
(N910PVPU3BOF5_N910PSPT3BOF5_N910PVPU3BOF5_HOME.tar.md5)
Instructions:
1. Download and Extract tar above and download Odin
2. Put phone into download mode (power off, then power button + Volume Down, then volume up when prompted)
3. Open Odin (right click > open as administrator)
4. Load stock tar into the PDA slot
5. Start flashing
6. Grab some popcorn because it will take a while
7. Profit
Click to expand...
Click to collapse
tommacco said:
Does anybody still have this firmware version available? The latest marshmallow updates are destroying Galaxy phones left and right with no solution other than paying Samsung to fix the problem and waiting 2 weeks without your device.
Click to expand...
Click to collapse
Its still in my mediafire folder. I'll upload it to another site since mediafire has flagged it
Edit: Here is the new link
Thank you so much. I will let you know if this actually fixes my woes.... this ROM may become a major fix for a lot of people while Samsung continues to argue with us that there isn't a problem worth filing a bug report for.
random45 said:
Its still in my mediafire folder. I'll upload it to another site since mediafire has flagged it
Edit: Here is the new link
Click to expand...
Click to collapse
Bah, giving me a software revision check error in odin. I guess this means I have to replace the bootloader? samsung is killing me here, they issued a faulty update and blocked off all means of recovery... won't buy one of these devices again.
tommacco said:
Bah, giving me a software revision check error in odin. I guess this means I have to replace the bootloader? samsung is killing me here, they issued a faulty update and blocked off all means of recovery... won't buy one of these devices again.
Click to expand...
Click to collapse
Don't know what problem you're experiencing but most likely you can't go back to Android 5.0 through Odin.
Did you try OG5 or higher stock tar? Actually, I'd recommend OK1 or latest. If older ROMs are your goal, backup, wipe everything but extSdCard and Odin OG5 and up to match bootloader of ROM, flash the ROM. Do not Odin any tar below OG5.
If the ROM is Android 5.0 or KitKat, I think you still need to flash an Odin tar that's Android 5.1 and you need to flash an Android 5.1 kernel, like Beastmode 2.2 Flash ROM and then kernel before booting.
Can't imagine latest ROMs are to blame for ruining your phone. Marshmallow is a bit if a prude until you get familiar with it and setup properly. But if that's not to your liking, give Moar 2.1b a try. Backup and wipe as above and Odin back to OK1 if you don't have a backup. Follow the OP install instructions.
Sent from my SM-N910P using Tapatalk
samep said:
Don't know what problem you're experiencing but most likely you can't go back to Android 5.0 through Odin.
Did you try OG5 or higher stock tar? Actually, I'd recommend OK1 or latest. If older ROMs are your goal, backup, wipe everything but extSdCard and Odin OG5 and up to match bootloader of ROM, flash the ROM. Do not Odin any tar below OG5.
If the ROM is Android 5.0 or KitKat, I think you still need to flash an Odin tar that's Android 5.1 and you need to flash an Android 5.1 kernel, like Beastmode 2.2 Flash ROM and then kernel before booting.
Can't imagine latest ROMs are to blame for ruining your phone. Marshmallow is a bit if a prude until you get familiar with it and setup properly. But if that's not to your liking, give Moar 2.1b a try. Backup and wipe as above and Odin back to OK1 if you don't have a backup. Follow the OP install instructions.
Sent from my SM-N910P using Tapatalk
Click to expand...
Click to collapse
The stock OTA update from Sprint (PE1) started all these shenanigans with the phone, and it's done the same for many people across a few different carriers from what I've seen on the internet.
tommacco said:
The stock OTA update from Sprint (PE1) started all these shenanigans with the phone, and it's done the same for many people across a few different carriers from what I've seen on the internet.
Click to expand...
Click to collapse
I updated bootloader and baseband only to PE1 and flashed a custom ROM. Later flashed a custom PE2 ROM. The ROMs are Note 4our by @freeza beta 2 and beta 3.
I see nothing wrong with PE1 or PE2. Did you try a factory reset? It does seem data from Lollipop can interfere with custom ROMs on Marshmallow. Main issue I saw with that was ItsOn on the root folder: /carrier/ItsOn The apk in that folder can partially activate on a factory reset and continually reboot a phone trying to setup the ItsOn bootstrapper but cannot so the cycle continues until you fix it. Wiping internal memory and factory reset prior to custom ROM (especially after stock tar update) will help but the developers may have removed that possibility in recent ROMs.
OTA may be suspect too but may only apply if rooting it. ItsOn and Knox don't play nice with root.
I'm not aware of cross carrier issues though?
Sent from my SM-N910P using Tapatalk
samep said:
I updated bootloader and baseband only to PE1 and flashed a custom ROM. Later flashed a custom PE2 ROM. The ROMs are Note 4our by @freeza beta 2 and beta 3.
I see nothing wrong with PE1 or PE2. Did you try a factory reset? It does seem data from Lollipop can interfere with custom ROMs on Marshmallow. Main issue I saw with that was ItsOn on the root folder: /carrier/ItsOn The apk in that folder can partially activate on a factory reset and continually reboot a phone trying to setup the ItsOn bootstrapper but cannot so the cycle continues until you fix it. Wiping internal memory and factory reset prior to custom ROM (especially after stock tar update) will help but the developers may have removed that possibility in recent ROMs.
OTA may be suspect too but may only apply if rooting it. ItsOn and Knox don't play nice with root.
I'm not aware of cross carrier issues though?
Sent from my SM-N910P using Tapatalk
Click to expand...
Click to collapse
I've done factory reset, wiped cache partition, reflashed PE1 and PE2 to no avail. This all started with OTA updates- I didn't touch the software or try flashing anything myself until these problems persisted and didn't go away with factory resets. I've seen others report these same issues in sprint/other forums, seems they ran into similar issues with recent OTA updates of the S5 as well. Sprint claims they're aware of this and are working with Samsung, Samsung support claims it's my problem and I have to pay to get them to reflash the latest update (which I've proven to myself is futile), in the meantime I'm left with a device that is essentially crippled by these frequent restarts and crashes. That's what I get for sticking with stock software ::sigh::. I may start exploring custom ROMs, which I tend to not trust due to the obvious security concerns, so I'm not left with a $700 brick as Sprint and Samsung worry exclusively about devices launched in the last 6 months.
tommacco said:
I've done factory reset, wiped cache partition, reflashed PE1 and PE2 to no avail. This all started with OTA updates- I didn't touch the software or try flashing anything myself until these problems persisted and didn't go away with factory resets. I've seen others report these same issues in sprint/other forums, seems they ran into similar issues with recent OTA updates of the S5 as well. Sprint claims they're aware of this and are working with Samsung, Samsung support claims it's my problem and I have to pay to get them to reflash the latest update (which I've proven to myself is futile), in the meantime I'm left with a device that is essentially crippled by these frequent restarts and crashes. That's what I get for sticking with stock software ::sigh::. I may start exploring custom ROMs, which I tend to not trust due to the obvious security concerns, so I'm not left with a $700 brick as Sprint and Samsung worry exclusively about devices launched in the last 6 months.
Click to expand...
Click to collapse
It's things like Carrier IQ, ItsOn, Knox, infrequent kernel updates (well that may be corrected now with monthly security updates) and bloat that prohibits my trust of carrier and manufacturer to get things right where my battery doesn't drain, phone doesn't lag and get warm for no apparent reason. Just hate the feeling that someone else just used my phone when I wake it out of standby.
I may have to agree to those terms to run the software but it doesn't prohibit developers from using open source code and methods to make things work better. IMO, that improves personal security rather than put me at risk. It may only be network meta data that Sprint retrieves with ItsOn but that doesn't come without a loss of battery and resources (induced drain and lag).
I trust little but the ROMs I run are mostly stock. Just have the garbage removed or under control with some added custom features. But I still can't deal with Sprint Zone running on my phone but I may not be in the majority on that one. I freeze it.
You mentioned checking custom ROMs out, freeza has a PE1/PE2 ROM out that takes an additional step to prevent some of the things I've brought up with rooted phones. It may help with your frequent reboots. I'm running it with PE1 bootloader and baseband until those flashes are available for PE2 in the bootloader baseband thread.
Sent from my SM-N910P using Tapatalk
samep said:
It's things like Carrier IQ, ItsOn, Knox, infrequent kernel updates (well that may be corrected now with monthly security updates) and bloat that prohibits my trust of carrier and manufacturer to get things right where my battery doesn't drain, phone doesn't lag and get warm for no apparent reason. Just hate the feeling that someone else just used my phone when I wake it out of standby.
I may have to agree to those terms to run the software but it doesn't prohibit developers from using open source code and methods to make things work better. IMO, that improves personal security rather than put me at risk. It may only be network meta data that Sprint retrieves with ItsOn but that doesn't come without a loss of battery and resources (induced drain and lag).
I trust little but the ROMs I run are mostly stock. Just have the garbage removed or under control with some added custom features. But I still can't deal with Sprint Zone running on my phone but I may not be in the majority on that one. I freeze it.
You mentioned checking custom ROMs out, freeza has a PE1/PE2 ROM out that takes an additional step to prevent some of the things I've brought up with rooted phones. It may help with your frequent reboots. I'm running it with PE1 bootloader and baseband until those flashes are available for PE2 in the bootloader baseband thread.
Sent from my SM-N910P using Tapatalk
Click to expand...
Click to collapse
Yeah I don't really trust Sprint at all to be honest with you, or any US carrier for that matter... my options seem to be limited toward trying to deal with this nonsense, flashing custom ROMs for which I can't verify the security integrity (sure a lot of folks doing this stuff mean well, but it only takes one bad actor and all of the sudden what little privacy I have is gone), or switching to Apple who thoroughly QAs all of their releases, gives loaners out when problems arise, etc. None of those options are particularly appealing to me unfortunately.
---------- Post added at 05:30 PM ---------- Previous post was at 04:51 PM ----------
samep said:
I updated bootloader and baseband only to PE1 and flashed a custom ROM. Later flashed a custom PE2 ROM. The ROMs are Note 4our by @freeza beta 2 and beta 3.
I see nothing wrong with PE1 or PE2. Did you try a factory reset? It does seem data from Lollipop can interfere with custom ROMs on Marshmallow. Main issue I saw with that was ItsOn on the root folder: /carrier/ItsOn The apk in that folder can partially activate on a factory reset and continually reboot a phone trying to setup the ItsOn bootstrapper but cannot so the cycle continues until you fix it. Wiping internal memory and factory reset prior to custom ROM (especially after stock tar update) will help but the developers may have removed that possibility in recent ROMs.
OTA may be suspect too but may only apply if rooting it. ItsOn and Knox don't play nice with root.
I'm not aware of cross carrier issues though?
Sent from my SM-N910P using Tapatalk
Click to expand...
Click to collapse
It seems as though the PD1 firmware (had to remove the cache.img.ext4 and repackage it) has since fixed these problems. I will update this thread if I noticed the problems again, but if anyone else is coming across the problems I noticed I would highly suggest atttempting this line of remediation since Sprint and Samsung support will not help you.
tommacco said:
Yeah I don't really trust Sprint at all to be honest with you, or any US carrier for that matter... my options seem to be limited toward trying to deal with this nonsense, flashing custom ROMs for which I can't verify the security integrity (sure a lot of folks doing this stuff mean well, but it only takes one bad actor and all of the sudden what little privacy I have is gone), or switching to Apple who thoroughly QAs all of their releases, gives loaners out when problems arise, etc. None of those options are particularly appealing to me unfortunately.
---------- Post added at 05:30 PM ---------- Previous post was at 04:51 PM ----------
It seems as though the PD1 firmware (had to remove the cache.img.ext4 and repackage it) has since fixed these problems. I will update this thread if I noticed the problems again, but if anyone else is coming across the problems I noticed I would highly suggest atttempting this line of remediation since Sprint and Samsung support will not help you.
Click to expand...
Click to collapse
Why did you repackage cache? It only contains csc related things and I assume won't flash with odin unless the entire tar is repacked with a different md5
Greetings,
I really don't want this to be a repeat post, so I have spent many days now searching for this answer, not just here on XDA if I was honest, I have links to prove it
The aim is to give a little new life to my old phone, and get off the 4.1 build it is on.
With that said, in summary, I have tried a few different custom ROMs; Cyanogenmod 11 - 13, stable to nightly. PAC MAN ROM for Lollipop, some other roms for KitKat I found else where, but in all these I have not been able to get 4G to work. I understand about updating the Modem, and got the latest version from DocHoliday77's post for the Galaxy S3, in point of fact I tried every modem version for 4.3+ on there
But for all this, and it's been time consuming I never managed to actually get 4G to work as stated
I tried playing with settings in Test Mode (*#*#4636#*#*), changed preferred settings, added APN's, rebooting during certain phases of the moon ... but somehow it all avails me diddly.
Finally I have genuinely tried searching for info on if this just isn't going to happen and that's how it is, but somehow I found lots of posts about other models or networks that made it work more than something saying this won't work (putting aside the info on CM 11 that states it's a known issue and won't work on some build I forget).
Which leads me to this post: I wondered if anyone could point me in either the direction of a 4.4+ custom ROM or other ROM, compatible for SGH-T999 (T-Mobile Galaxy S3), that has working 4G. Or how I can get 4G to work on one of the ROMs I have already tried, kind of partial to a nice CM but I am willing to venture.
Also happy to just hear other input about giving new life to the phone so any feedback welcome
Thanks for your time!
NOTES
======
Using TWRP 3.x for flashing
Phone is rooted
IMEI is visible & fine on custom ROM
4G works on stock ROM
not experienced at this but willing to read
Edit: something I had not noticed before, I install Gapps for most of my tests but never use it. I just tried to download from Play Store, it acts as though I have no connection; waiting to download appears, then eventually it says waiting for network. Yet I am able to browse the net fine with the phone floating between 3G & H+. I don't know if that might help, so figured I should add it.
Is the phone running the latest bootloader and modem? Maybe both are needed to properly get 4g on all Roms?
audit13 said:
Is the phone running the latest bootloader and modem? Maybe both are needed to properly get 4g on all Roms?
Click to expand...
Click to collapse
That's a really good question, let me see if I can find out how to get my bootloader info and I'll get back to you.
May I ask what the latest bootlader is for the SGH-T999, or where I could find this so I can compare it? I couldn't seem to find it, though the most resourceful post I did find related was T999 UVDMD5 Firmware / Bootloader by mnasledov, though it is also a little outdated it appears, I haven't read my entire way through it yet sorry, I also know the phone is a little outdated too .
So that wasn't too bad to find out
I don't have the latest bootloader if that should match the baseband I install.
Where after a ROM install I get my baseband to T999UVUEOH1, but the bootloader stays on T999UVDLJA.
I haven't quite found where to get the latest bootloader just yet, though I did really spend the last few minutes discovering about the bootloader; if you or someone could find the time to point me in that direction that would be awesome
Simplest way to make sure you have the latest would be to flash the most recent stock rom from sammobile.com in Odin.
Thank you very much @audit13, I do appreciate the time you took out to help me and I also appreciate the point in the direction of what next.
I'll go dig into that for a while and see what to do to be sure, before I start
Looks like this is the latest one, so I will give this a shot : PDA T999UVUEOH1 & CSC T999TMBEOH1, version 4.3.
So just as a quick question, since I've never upgraded the bootloader in this fashion etc., from what I have read this is a one way street correct? And since I am upgrading to stock, then I guess will I lose root, which I will have to go back down the path of for a reinstall, or could I flash my old back up over this from TWRP and in that fashion have the latest bootloader, but keep everything I have for the moment as I investigate a ROM that will offer 4G.
I guess what I am getting at is even if having the latest bootloader and some other ROM with the latest baseband doesn't give me 4G still, can I go back in terms of the OS version to my 4.1.1 and keep things as is with a newer bootloader?
I will investigate this myself too, I just always preferred some additional input when discovering things where possible.
I do appreciate your time, thanks again!
No, you cannot run stock 4.1.1 on a 4.3 bootloader unless it is a custom 4.1.1 rom based on a stock touch wiz rom.
I do not think it is a problem to run the latest bootloader and modem as the latest custom ROMs often require an updated bootloader and modem.
Once on a 4.3 bootloader, you can't downgrade to something older.
Thanks again @audit13, that matches what I have read, I appreciate the confirmation!
Looks like I will be undergoing a re-root etc. so I'll get my information together, have a little more read, see what I need to back up and then jump down the rabbit hole
I'm grateful for your time and help.
If you decide to run a custom rom, just flash a stock rom, then immediately flash twrp via Odin, then install the rom and gapps. No need to root before hand.
Ahh ok, that would have made the most sense. However I didn't have an opportunity to check back on this thread until now so even though you had awesome speedy reply I missed it.
I did manager to successfully flash the stock ROM from Sam's. It did also update the bootloader so THANK YOU very much for that.
I had to fiddle a little to get Odin to recognize the my Galaxy S3 in the end it was simple: after I installed Kies to get the drivers on, I disabled WI-Fi (I use it for my dev work, and then it didn't try to spend time getting other drivers and it all went great. But that's just a note incase maybe one day someone else reads the thread and wonders how, this might help.
I'm just actually restoring a couple f things on the stock ROM, I figured I would have it ready in the event a custom ROM doesn't suit immediately, as I find one I like, then I have a back up of the stock ROM on 4.3 to revert to. Incidentally I just used TWRP manager from Google play store to install TWRP, hopefully it's the same as the flash, except now I know I rooted when I didn't have to
@audit13 Thanks, I know I keep saying that but I appreciate your time the same way I would hope someone else appreciated mine.
Incidentally once ready I will post an update here about the success of getting 4G on Cyanogenmod 12 or even 13 maybe, or someone of the other custom ROM I try, to share that info.
So just an update, I can confirm even with both an updated bootloader and matching updated baseband there is still no 4G on Lollipop Cyanogenmod 12, haven't quite tried any other yet, that was the one I liked the most but I will carry on and get a list as I have time then update here.
If there are any further suggestions I'm all open to them
Thanks [email protected]
Do you get 4G on a stock ROM? You have an LTE capabale sim? You get 4G on another phone with the same sim card?
Right, this SIM gets 4G on 2 other phones it's been in, on this phone on stock ROM it gets 4G too. Reverting back to stock backup in TWRP, from CM12 looks like it tripped knox I think it is, so now the warranty bit is 1 oops. But I managed to Odin back to 4.3 stock, so now I also need to see if I can try to flash maybe to CM 11, which is 4.4.x, or if maybe I'm stuck here. If I can find out I certainly will update the result of 4G testing.
You've been really patient & helpful thanks!
First let me say I'm a noob. I've rooted and jailbroken devices but I admit it's all from falling instructions. I rooted my s3 a while ago and installed twrp 1.0.8.7 yesterday. I did a full wipe including system and all catches and installed the latest nightly of cm13. Everything is running great. I don't know if this helps but maybe it's your process. Good luck!
Sent from my Amazon Jem using Tapatalk
Shack70 said:
First let me say I'm a noob. I've rooted and jailbroken devices but I admit it's all from falling instructions. I rooted my s3 a while ago and installed twrp 1.0.8.7 yesterday. I did a full wipe including system and all catches and installed the latest nightly of cm13. Everything is running great. I don't know if this helps but maybe it's your process. Good luck!
Sent from my Amazon Jem using Tapatalk
Click to expand...
Click to collapse
That's really helpful thanks @Shack70, since updating to 4.3 I have only tried CM 12, I can certainly give 13 a shot, & you have 4G working then please?
incidentally I have actually recorded every step I performed, in the event I repeat this again or I had to explain it. But my process maybe at fault I agree; I rooted my phone with towelroot. Installed TWERP manager (3.0.2 something, maybe I should try 1.0.8?), rebooted into recovery & first thing was take a full backup on stock. Then I did a factory wipe, & advanced wipe. Then installed the ROM, wiped dalvik/cache. Installed Apps, wipe dalvik/cache, reboot
Hopefully that's not too much? I just wonder if any of those steps raise alarm?
Edit: mind if I throw a few questions on here at you please @Shack70?
what do you wipe from the options please?
after the install, do you run any other wipes please?
how did you get TWRP on your phone? Not sure if that or version matters but I'm willing to try
Morrigon said:
That's really helpful thanks @Shack70, since updating to 4.3 I have only tried CM 12, I can certainly give 13 a shot, & you have 4G working then please?
incidentally I have actually recorded every step I performed, in the event I repeat this again or I had to explain it. But my process maybe at fault I agree; I rooted my phone with towelroot. Installed TWERP manager (3.0.2 something, maybe I should try 1.0.8?), rebooted into recovery & first thing was take a full backup on stock. Then I did a factory wipe, & advanced wipe. Then installed the ROM, wiped dalvik/cache. Installed Apps, wipe dalvik/cache, reboot
Hopefully that's not too much? I just wonder if any of those steps raise alarm?
Edit: mind if I throw a few questions on here at you please @Shack70?
what do you wipe from the options please?
after the install, do you run any other wipes please?
how did you get TWRP on your phone? Not sure if that or version matters but I'm willing to try
Click to expand...
Click to collapse
In twrp I wiped system and all caches before installing the rom and gapps. I installed an older version of twrp using Odin and updated it to 2.0.8.7 using the twrp app in the play store. Yes I have 4g/lte. I've seen it switch from lte to h+ to 3g depending on my location so I'm sure it's working correctly. The camera and Bluetooth also work fine. I hope this helps, I'm still learning and most of what I've done is just by following others instructions here at XDA.
Sent from my Amazon Jem using Tapatalk
I definitely appreciate the reply thanks!
I gave the latest nightly CM 13 a shot just now, 7/31/16 version essentially. Not finding any issues with the ROM, can't get 4G to show up no matter what though , even with changes and attempts to APN settings etc. None the less maybe to give my phone a rest I'll just stick with this a while and decide if a newer nightly comes out I want to try, or better yet a stable version at some point. Then I can verify how much I really miss my 4G I guess.
All the previous attempts, including this one always results in 3G to H+ network with no issue, it's just that 4G that never shows up for me.
Incidentally without a serious search around I couldn't even find TWRP 2.0.8.7, it's not on the TWRP manager version I have so curious, I ended up just going with 2.8.0.7, thinking maybe it was a typo?
Otherwise I basically run the same type of install you mention, I also clean dalvik, cache, system & data in my case. Just to confirm that.
I have a slightly off topic question here, if I decide to go back to to stock I was wondering, if i went from UVUEOH1 4.3 JB build, to the previous UVUENC2 4.3 JB build; because I've seen this available as a clean route 66 version, is this still considered a downgrade and a bad idea? I'd be flashing with Odin from @DocHoliday77 post here.
@Shack70, thanks for the input, thanks for the guide on your steps, glad I've confirmed I'm doing the same even if I can't get my 4G, hopefully someone on a Galaxy S3 T-Mobile, went through this found a solution, and maybe will let me know what they did too, not sure if you are on T-Mobile or not.
@audit13, also thanks, you've been replying plenty too and I appreciate that also!
One small thing I just came across looking over the logs of the install.
When flashing CM 13 with TWRP, I noticed it said the Target: samsung/d2tmo/d2tmo:4.3/JSS15J/T999UVUEMJC:user/release-keys.
Is it normal and OK for it the be referencing a different baseband/bootloader than what I actually have on my phone?
UVUEMJC vs the UVUEOH1? Where the one as named by TWRP flash is 2 versions older than what I have installed? Not necessarily stating this is an issue, just asking please if this is normal, and I also understand it could be something I have overlooked in my reading, it's been a lot of reading
I would not worry about the referenced baseband as flashing CM13 does not change the bootloader or baseband during the flash process.
audit13 said:
I would not worry about the referenced baseband as flashing CM13 does not change the bootloader or baseband during the flash process.
Click to expand...
Click to collapse
That makes sense thanks @audit13, just a few of the questions I had building up.
So that my previous question doesn't get lost, and although I know it's a dying phone for users hopefully this might get some visual
if I decide to go back to to stock I was wondering, if i went from UVUEOH1 4.3 JB build, to the previous UVUENC2 4.3 JB build; because I've seen this available as a clean route 66 version, is this still considered a downgrade and a bad idea? I'd be flashing with Odin from @DocHoliday77 post here.
Click to expand...
Click to collapse