[Q] Virtual memory RAM (swap) for Asus Fonepad ME373CG (same as ME372CG) - Asus Fonepad 7

Hello, I have a Asus Fonepad ME373CG, purchased in Italy, (the same as ME372CG: only changes the size of the SD memory CARD) and I would like to activate a virtual RAM memory to add to 1 GB provided by the device.
I tried with different app (Simple Root Swap, Swapper Configuration).
At the end, the app MemoryInfo & Swapfile Check gave me the message that my Kernel does not support swap.
The OS is Android 4.4.2
- Build KVT49L.6.4.4 WW_epad-V-20140922
044000263_201405210029
- Kernel 3.10.20-00002-gc4c2d96-android @ mec11 # 1.
Is it possible?
Greetings.

Related

Help me optimise my setup

Hi all,
I'm kind of a newbie in the android world and my technical english isn't that good, espaecially in nunux world... any ways, could you tell me if i made a big f*up in some choices.
Here is what I have :
- Desire AMOLED
- Defrost 6.1
- Alpharev N1Table
- Clockwork mod recovery
- mSD 4Go [Class 4 i think] in 3 parts
> FAT32 3.16 Go
> EXT2 512 Mo
> Linux Swap 32Mo
- Radio 5.09.05.30_2
- Kernel 2.6.35.7
- Launcher : Go Launcher
Rom has been freshly installed yesterday
And I hardly score 1300 points at quadrant
Did I do something wrong ?
Thanks in advance
regards

[Q] How to see the real CPU, RAM, HDD etc on Flytouch 3 16GB Version

hi all,
i am very new in android OS.
i have bought the epad Superpad II Flytouch 3
spec shown on ads is: (main)
10.2" SuperPad II flytouch3
Android 2.2
GPS WIFI Camera 3G
RAM 512MB
CPU 1GHz Infortm X220
Flashplayer
option: 4G/8G/16GB built in memory.
and so i buy the 16GB build in memory.
What i need to know is:
i only seen with Android System Information:
Internal Memory : 3.38GB available space
RAM : 327mb and 228mb Free
CPU : ARMv6 Compatible (v6l)
but in MyPad Shortcut : there are 10.33GB Free (i don't know what it is)
My question is :
1. Is the ads exactly tells the truth or fraud?
2. What is the different between Internal Memory with Memory shown at MyPad
3. How can i use the 16GB build-in memory as promised?
Thanks for attentions.
awenk2000 said:
hi all,
i am very new in android OS.
i have bought the epad Superpad II Flytouch 3
spec shown on ads is: (main)
10.2" SuperPad II flytouch3
Android 2.2
GPS WIFI Camera 3G
RAM 512MB
CPU 1GHz Infortm X220
Flashplayer
option: 4G/8G/16GB built in memory.
and so i buy the 16GB build in memory.
What i need to know is:
i only seen with Android System Information:
Internal Memory : 3.38GB available space
RAM : 327mb and 228mb Free
CPU : ARMv6 Compatible (v6l)
but in MyPad Shortcut : there are 10.33GB Free (i don't know what it is)
My question is :
1. Is the ads exactly tells the truth or fraud?
2. What is the different between Internal Memory with Memory shown at MyPad
3. How can i use the 16GB build-in memory as promised?
Thanks for attentions.
Click to expand...
Click to collapse
Do you have adb shell access? The best way to settle this "dispute" with the device is to run
df -h
from adb shell, and it will tell you the size of each partition. Add the sizes up (if it ends M, it's Megabytes, if G it's Gigabytes). See if it adds up to 16 GB... Regarding RAM, post the output of the command
free
from adb shell and we can see how much RAM exists.
hi thank you for the answer.
where can i get this adb shell access?
i use terminal emulator but the command doesn't work.
If terminal emulator doesn't work please try Better Terminal Emulator.
Make sure you run:
SU ----> to run as superuser
For CPU information, is there anyway to check it?

[Q] Gt-p5210 virtual Ram

I was wondering how and if it is possible to use my SD card as virtual ram on my tab 3, 1 gb ram can't do much. If it's possible can someone show me where I can get full instructions on how to please, ty

More RAM (special for the 16GB Versions)

Hi Guys,
there was a possibility on Lollipop to expand RAM in the build.prop with these entries:
ro.sys.fw.mOomMinFree1=49152
ro.sys.fw.mOomMinFree2=61440
ro.sys.fw.mOomMinFree3=65000
ro.sys.fw.mOomMinFree4=70000
ro.sys.fw.mOomMinFree5=80000
ro.sys.fw.mOomMinFree6=100000
The most ROMs are optimized for 32GB G3-Versions (with 3GB RAM) and with this change the most ROMs should run smoother - that´s what i have readen in other forums.
I never tried it, and now i´m on MM6.0.1 - where i can´t find these entries in the build.prop.
Can i somehow make use of this and is it worth it?
Thx :good:

A sincere request for help in starting support via Micro USB port - external 128 GB / 256 GB / 512 GB SSD disk on LG G4 H815.

Hello, I am asking for help. I need to run the Smartphone LG G4 H815 on Custom Rom Android LineageOS 17.1/ 18.1 with 128 GB / 256 GB / 512 GB disk support via an external Micro USB port. I am asking you very sincerely for your support. I need to know if I could add additional memory to this Smartphone for recording 4k videos in 60/120/240 frames per second. I need to have options and possibility in this Smartphone - to make it work for me. I need the support via the Micro USB port in this smartphone for connected SSD drives. From the depths of my heart, I am asking for help.
I am asking you very sincerely for your support. I need to know if I can use this Smartphone for Video-filming In 4k resolution- at the speed of 120/240 FPS.
I am asking for your help and support. in addition to this option, it needs to use an external SSD - to be operated as Zram / Swap.

Categories

Resources