Hey guys,
I wanted to install the new software the B510 but when I want to install it, it always stops and I get the message:
assert failed: apply_patch_check("/system/app/Books.apk", ........
E:Error in /sdcard/update.zip
(status 7)
Installation aborted
Can anyone help me? I'm on B125 and I've even tried a full wipe.
1. update B125
2. download B510 from Link
3. create folder "dload" and copy update.zip in folder "dload"
4. copy folder paste on SD Card
5. Settings>>About phone>System Update>Local update
neoarnet said:
1. update B125
2. download B510 from Link
3. create folder "dload" and copy update.zip in folder "dload"
4. copy folder paste on SD Card
5. Settings>>About phone>System Update>Local update
Click to expand...
Click to collapse
hi..
as i wrote in the other thread i wasn't able to get the b510 (or b132 now) to pass the verify check..
i tried now almost everything i found inside this forum..
from unlocking bootloader to clean install and this tipp..nothing happend though i'm frustrated with this..
maybe someone can make a clear and step by step guide how to make e.g. a clean install of a rom, what bootloader is needed, which adb commands for unlocking (it is freaky to find these informations in about 5-8 different threads)..
i know that i can use the search and i do so.. but it is sometimes very difficult and timeeating to find the information i need..
Some times to update is required the last previous rom
Hi
I have just got the P6
and have seen that 4.4 is out for it but when i check update it says no update found
this has Build Number p6-u06v100r001c00b106 on it i read it needs 132 to put 510 on
is there a tutorial for idiots because i fall into that class
many thanks in advance
Damage said:
Hi
I have just got the P6
and have seen that 4.4 is out for it but when i check update it says no update found
this has Build Number p6-u06v100r001c00b106 on it i read it needs 132 to put 510 on
is there a tutorial for idiots because i fall into that class
many thanks in advance
Click to expand...
Click to collapse
Download B132 ROM and extract the compressed file. Then copy UPDATE.APP in your Sdcard/dload folder.
Then go to settings --> About --> Updates
Select Local Update & Follow the instructions.
It will restart & start update..
After finish everything fine.. Download B510 & copy UPDATE.ZIP (Not Update.APP) in dload foder.
Note: Remove the previous UPDATE.APP (B132) from your dload folder.
Do it again same process.. Settings --> About --> Update..--- > Local Update.
After finish everything fine.. Enjoy New Kitkat..
Hi guys!
Firstable, as always, excuse my English....So, I just receive my P6, its on B105 JB 4.2.2, I want to Root and TWRP so I can install PA or Cyano.....I read that firstable I have to be on B510 to do the process...I found this post (http://www.htxt.co.za/2014/06/27/how-to-update-the-huawei-ascend-p6-to-android-4-4-2/) that explains how-to from b125 to b510....so my question, can I go straight from b105 to b125 and to the process, or is there any other software between those 2? Please, if there is a completely diferent process else where from b105 to b510, post the link please...I search but I didn't find anything,
As always, thanks to all of you guys.
you should get first the b112 and then do the steps as mentioned in the article..
the step for b112 is the same as for the others
if its a zip file - rename to update.zip and put it inside dload folder onto your sdcard..
if its a app file - rename it to update app and put it inside dload folder onto your sdcard (sometimes the update.app is compressed to a zip - so you have to extract it)
then you can go ahead with the local update method : settings - about phone - system update - local update..
then - if everything works well you have the p6 with kitkat 4.4.2
for root and that stuff look inside this forum - many threads about it are there..
good luck
Gesendet von HUAWEI Ascend P7-L10 B602
blueIBI said:
you should get first the b112 and then do the steps as mentioned in the article..
the step for b112 is the same as for the others
if its a zip file - rename to update.zip and put it inside dload folder onto your sdcard..
if its a app file - rename it to update app and put it inside dload folder onto your sdcard (sometimes the update.app is compressed to a zip - so you have to extract it)
then you can go ahead with the local update method : settings - about phone - system update - local update..
then - if everything works well you have the p6 with kitkat 4.4.2
for root and that stuff look inside this forum - many threads about it are there..
good luck
Gesendet von HUAWEI Ascend P7-L10 B602
Click to expand...
Click to collapse
Thanks a lot bro! im gonna update to b112, then b125, b132, b510
and then my lovely PA....I really appreciate the fast response.
Again, thanks!
So I successful managed to rebrand my Indian Honor 6X (BLN-L22) to European Honor 6X (BLN-L21). This enabled me to use frequency band supported by EU version of the phone.
Following are the steps I followed:
1. Unlocked Bootloader : https://forum.xda-developers.com/honor-6x/how-to/how-to-unlock-bootloader-honor-6x-t3535321
2. Flash Custom Recovery:
i. Download TWRP for EMUI 4.1 or EMUI 5.0: https://forum.xda-developers.com/ho...k-recoveries-honor-6x-bln-l21-blnc00-t3632440
ii. In the folder where you have the twrp.img file (name may vary), shift+right click to open cmd prompt.
> adb reboot bootloader
> fastboot flash recovery twrp.img (or whatever is the name of your twrp img file)
3. Download Huawei Multi Tools and backup your oeminfo
4. Download oeminfo flashable zip attached with this post. Currently only EU and India are available. Request other users to share oeminfo of other regions
5. Using Firmware Finder, download the Stock ROM for the desired region. There will be two files, one update.zip file and another region specific file. Download both. Note: Only download Full Ota.
6. Extract the update.zip file and paste the UPDATE.APP file in a folder called "dload" inside an external sd card. Also copy the oeminfo zip file and region specific update zip file to an external sd card
7. Reboot to TWRP and flash oeminfo.zip
8. After oeminfo is flashed. Shutdown the phone and restart by holding vol up + vol down + power. You will enter update page and stock rom will be installed.
9. Once installed, you need to re-install TWRP recovery by following steps 1 and 2.
10. Finally, reboot to TWRP and install region specific update file.
You have now successfully debranded/ rebranded your Honor 6X
***** Edit ******
Uploaded the correct oeminfo file. Thanks @sanjay.rup for notifying the error
Excellent. Let me try myself to Debrand this weekend. Thanks for nice share buddy
uditshah said:
So I successful managed to rebrand my Indian Honor 6X (BLN-L22) to European Honor 6X (BLN-L21). This enabled me to use frequency band supported by EU version of the phone.
Following are the steps I followed:
....
You have now successfully debranded/ rebranded your Honor 6X
Click to expand...
Click to collapse
Hello,
I have see your zip file and :
oeminfo_HW_EU.zip => updater script => package_extract_file("oeminfo/eu/custom.bin", "/data/custom.bin");
BUT, folder inside zip is => oeminfo\in\xxxxx and custom.bin say "hw/in" (india)
oeminfo_HW_IN.zip => you have forget to remove oeminfo_HW_IN root folder
Conclusion: i haven't test, but i think this 2 zip file will never work ! BUT a BIG thx, i was looking for a indian "oeminfo" file for a friend, i will backup the "asian" oemfile this night, and flash indian oeminfo file manualy with him.
I can re-create the 2 zip file, i have BLN-L21 oeminfo (my phone for EUROPE), AND indian oeminfo "seems" to be good ! but this is your thread
sanjay.rup said:
Hello,
I have see your zip file and :
oeminfo_HW_EU.zip => updater script => package_extract_file("oeminfo/eu/custom.bin", "/data/custom.bin");
BUT, folder inside zip is => oeminfo\in\xxxxx and custom.bin say "hw/in" (india)
oeminfo_HW_IN.zip => you have forget to remove oeminfo_HW_IN root folder
Conclusion: i haven't test, but i think this 2 zip file will never work ! BUT a BIG thx, i was looking for a indian "oeminfo" file for a friend, i will backup the "asian" oemfile this night, and flash indian oeminfo file manualy with him.
I can re-create the 2 zip file, i have BLN-L21 oeminfo (my phone for EUROPE), AND indian oeminfo "seems" to be good ! but this is your thread
Click to expand...
Click to collapse
Share the Indian version files plz. I will probably go with that
---------- Post added at 02:57 PM ---------- Previous post was at 02:55 PM ----------
No custom bin file required
sanjay.rup said:
Hello,
I have see your zip file and :
oeminfo_HW_EU.zip => updater script => package_extract_file("oeminfo/eu/custom.bin", "/data/custom.bin");
BUT, folder inside zip is => oeminfo\in\xxxxx and custom.bin say "hw/in" (india)
oeminfo_HW_IN.zip => you have forget to remove oeminfo_HW_IN root folder
Conclusion: i haven't test, but i think this 2 zip file will never work ! BUT a BIG thx, i was looking for a indian "oeminfo" file for a friend, i will backup the "asian" oemfile this night, and flash indian oeminfo file manualy with him.
I can re-create the 2 zip file, i have BLN-L21 oeminfo (my phone for EUROPE), AND indian oeminfo "seems" to be good ! but this is your thread
Click to expand...
Click to collapse
You are right. I realized I uploaded the wrong files. I was using the EU version zip file to create the IN version zip and by mistake uploaded the working file.
Please do upload the oeminfo files you have. It would be super useful for the community
shashank1320 said:
Share the Indian version files plz. I will probably go with that
---------- Post added at 02:57 PM ---------- Previous post was at 02:55 PM ----------
No custom bin file required
Click to expand...
Click to collapse
Here you go
uditshah said:
Here you go
Click to expand...
Click to collapse
For BLN-L22?
And no need of custom bin?
shashank1320 said:
For BLN-L22?
And no need of custom bin?
Click to expand...
Click to collapse
I used the custom bin file. I have attached the Indian custom.bin file (extract the custom.zip file). If you are flashing using TWRP then you can directly flash the
oeminfo_HW_IN.zip file attached.
Hope this is useful
uditshah said:
I used the custom bin file. I have attached the Indian custom.bin file (extract the custom.zip file). If you are flashing using TWRP then you can directly flash the
oeminfo_HW_IN.zip file attached.
Hope this is useful
Click to expand...
Click to collapse
Ofcourse it is.
Thanks for the excellent share here
hi, i think ive made a huge mistake. i tried to modify the EU version of oeminfo by correcting the script ie giving it a correct path (replacing "in" with "eu) in updater script, it got successfully flashed but then the rom failed to install and as soon as the device rebooted system said something like "serious damage has occured" and then it wiped internal memory and locked the boot loader. i tried to install the rom (C185B361) which was working before via dload method but it keeps saying "version not compatible". i have access to fastboot, twrp and i also got backup of my original oeminfo. plz help me thank you
Khan001993 said:
hi, i think ive made a huge mistake. i tried to modify the EU version of oeminfo by correcting the script ie giving it a correct path (replacing "in" with "eu) in updater script, it got successfully flashed but then the rom failed to install and as soon as the device rebooted system said something like "serious damage has occured" and then it wiped internal memory and locked the boot loader. i tried to install the rom (C185B361) which was working before via dload method but it keeps saying "version not compatible". i have access to fastboot, twrp and i also got backup of my original oeminfo. plz help me thank you
Click to expand...
Click to collapse
Have you taken twrp backup?
Please restore if you have. Else due to flash, you model number is changed and you are not able to flash the original firmware.
May be you can try the other variant firmware which you flashed
Khan001993 said:
hi, i think ive made a huge mistake. i tried to modify the EU version of oeminfo by correcting the script ie giving it a correct path (replacing "in" with "eu) in updater script, it got successfully flashed but then the rom failed to install and as soon as the device rebooted system said something like "serious damage has occured" and then it wiped internal memory and locked the boot loader. i tried to install the rom (C185B361) which was working before via dload method but it keeps saying "version not compatible". i have access to fastboot, twrp and i also got backup of my original oeminfo. plz help me thank you
Click to expand...
Click to collapse
if it's old zip, rename "in/" folder with eu/ will not change file inside directory to "eu"; it's indian oemfile in L21 zip. Your are now brant to Indian rom. Redownload
sanjay.rup said:
if it's old zip, rename "in/" folder with eu/ will not change file inside directory to "eu"; it's indian oemfile in L21 zip. Your are now brant to Indian rom. Redownload
Click to expand...
Click to collapse
so if i get indian version of stock rom, install it via dload method, am i good to go?
P.S: this is a very unfortunate day as i removed my huge twrp backup in order to make space...so yeah a mess from my side.
Khan001993 said:
so if i get indian version of stock rom, install it via dload method, am i good to go?
P.S: this is a very unfortunate day as i removed my huge twrp backup in order to make space...so yeah a mess from my side.
Click to expand...
Click to collapse
if you have flash indian oeminfo file, you will be able to dload indian rom (C675).
If you flash your backup oeminfo file, you will be able to dload your old region rom file !
So, successfuly brant Asia to Indian with zip extracted oeminfo file. C636B372 => C675B340 via dload. VoLTE Jio SIM working for my friend's phone.
Download zip is not updated for me.
Waiting for him, to upload Asian oeminfo.
sanjay.rup said:
So, successfuly brant Asia to Indian with zip extracted oeminfo file. C636B372 => C675B340 via dload. VoLTE Jio SIM working for my friend's phone.
Download zip is not updated for me.
Waiting for him, to upload Asian oeminfo.
Click to expand...
Click to collapse
Did you rebranded your friend's phone?
shashank1320 said:
Did you rebranded your friend's phone?
Click to expand...
Click to collapse
YES. He was ASIAN C636 B372 (B360 before). Dload Indian C675 B340 failed !
Replace oeminfo file, with indian one (extracted from zip), and dload Indian C675 B340 flash success. VoLTE with JIO Sim work directly !
Khan001993 said:
hi, i think ive made a huge mistake. i tried to modify the EU version of oeminfo by correcting the script ie giving it a correct path (replacing "in" with "eu) in updater script, it got successfully flashed but then the rom failed to install and as soon as the device rebooted system said something like "serious damage has occured" and then it wiped internal memory and locked the boot loader. i tried to install the rom (C185B361) which was working before via dload method but it keeps saying "version not compatible". i have access to fastboot, twrp and i also got backup of my original oeminfo. plz help me thank you
Click to expand...
Click to collapse
Flash the attached oeminfo file using TWRP. It is the correct version of the EU oeminfo. Flash the ROM BLN-L21C10B131. It should work.
sanjay.rup said:
YES. He was ASIAN C636 B372 (B360 before). Dload Indian C675 B340 failed !
Replace oeminfo file, with indian one (extracted from zip), and dload Indian C675 B340 flash success. VoLTE with JIO Sim work directly !
Click to expand...
Click to collapse
Perfect. Can you ask your friend to upload ASIAN oeminfo
Get as many files as we can...it will be helpful for sure. Repository thread will be updated soon with all these info with proper credit :good:
Good work guys
Hello Guys,
i opened the thread in the Question&Answer Forum but somehow i have an different approach now that i learned how to rollback an firmware version with an locked bootloader. i dont know if it is possible, i more want to open like a discussion about it if this would be an thing someone could possibly do (and thats the reason im opening another thread for it, since it is not the same question anymore as in the other thread).
well, you can flash an image like EML-L29 8.1.0.129 to the device via the dload method. this image installs just fine, great. but now.. in my understanding the interesting part is this update.app. this update.app as far as my knowledge goes contains all this img files. you know, kernel system boot recovery etc.. wouldnt it be possible to simply replace the recovery.img with an twrp recovery.img, put the update.app back together, zip it in the necessary update_sdcard file and try to install it? i read about the tool "HuaweiUpdateExtractor", and this handy nice tool is showing the files.
another thought of me is: the installer is *verifying* the update.app somehow. but if it is verifying this file, there must be like a crc-file, some way of telling "this file is original" or "this file is okay". so maybe this is another part of the problem that i would have to take care of. but still i would need to know a lot more about the way the eRecovery works.
my ultimate goal is to solve the bootloader code problem since tackling it with dc-unlock and hcu wont work cause the security patch level seems already too high in the first versions of this phone. im basically search now ways around it - i know, there is actually no way to do it, but this is the reason why im opening this thread in hope to get some clues or ideas - and telling my own. oh and im pretty sorry if this is maybe annoying, i surely dont have any intention of spam the forums or stress too much on this topic (but it got me very interested).
Edit: i read in another board that it is nearly Impossible to switch the img files because they are encrypted. I guess it is not possible with this method so basically.. just ignore this thread. I guess there is really no way.
Also I think they have to do some checksum when flashing, so it's really impossible to just switch files...
About dload, i'm on 9.0.0.293 on EML-L29C432
I try the dload method to rollback to android 8.1, no success
i use an usb otg, created dload folder to root and place update.app extracted zip in dload folder
Also i created an "EML-L29_hw_eu" folder inside dload with again extracted from the hw zip file
When i use the dialer method, phone recognize the update.app file and reboot
after reboot to recovery, i have an error and i can't downgrade
What i did wrong ?
thanks
bender8125 said:
About dload, i'm on 9.0.0.293 on EML-L29C432
I try the dload method to rollback to android 8.1, no success
i use an usb otg, created dload folder to root and place update.app extracted zip in dload folder
Also i created an "EML-L29_hw_eu" folder inside dload with again extracted from the hw zip file
When i use the dialer method, phone recognize the update.app file and reboot
after reboot to recovery, i have an error and i can't downgrade
What i did wrong ?
thanks
Click to expand...
Click to collapse
well the biggest problem may be the image itself that you are trying to flash. if you take it from firmwarefinder, you will get most likely absolutely no success. you need to take one from androidhost.ru, the ones there worked for me. there you just put everything in the dload folder on your USB-Stick. oh and better use an full-OTA, not just an simple ota update, because that wont work (you cant just update a few files when you are already on EMUI 9). and on top of that: backup your phone first, because it is possible that after your downgrade you lose all data on your phone.
oh and another thing if you just want to get back to EMUI 8.1 (not a specific version you wish for), just use hisuite, because they are allowing the downgrade even more easily. the method i mentioned above is if you try to flash a specific version like i did with 8.1.0.120