Develop Bugs

N900TUVUDNE6 Extracted Stock Firmware

Here's the MODEM+NON-HLOS (both together and as separate files), Bootloader, Kernel, CSC, and Recovery I extracted ( by request from @effortless and @rolling56 ) from the old NE6 firmware release.
IF YOU NEED NF1 FIRMWARE, GO HERE: http://forum.xda-developers.com/showthread.php?t=2789932
IF YOU NEED NF4 FIRMWARE, GO HERE: http://forum.xda-developers.com/not...900tuvudnf4-extracted-stock-firmware-t2834398
IF YOU NEED NF9 FIRMWARE, GO HERE: http://forum.xda-developers.com/not...900tuvudnf9-extracted-stock-firmware-t2873520
Bootloader: http://www.mediafire.com/download/1g15vh6h15iv6gw/N900TUVUDNE6_BL.tar.md5
CSC: http://www.mediafire.com/download/31nmji2ik91hznu/N900TUVUDNE6_CSC.tar.md5
Kernel: http://www.mediafire.com/download/hsnupv32iw61egm/N900TUVUDNE6_KERNEL.tar.md5
Modem + NON-HLOS (Combined): http://www.mediafire.com/download/onzv8ckhdmurwcn/N900TUVUDNE6_MODEM+NON_HLOS.tar.md5
modem.bin: http://www.mediafire.com/download/wqztc5v8aahwt3p/modem.bin
NON-HLOS.bin: http://www.mediafire.com/download/zqu5m463pfs6ws2/NON-HLOS.bin
Recovery: http://www.mediafire.com/download/o3g75n5i2w2tsuy/N900TUVUDNE6_RECOVERY.tar.md5
Full Stock Image N900TUVUDNE6: http://www.mediafire.com/download/c...VUDNE6_N900TTMBDNE6_N900TUVUDNE6_HOME.tar.md5
If you have trouble getting the bootloader and/or Modem to stick, install "Triangle Away" by @Chainfire and follow the directions to reset your counter (even if it says zero), then boot into download mode, and re-flash them with Odin and they should stick.
To verify, you can download "Phone Info - Samsung" and make sure that all 4 items say NF4 (Bootloader, Baseband, PDA and CSC).
Triangle Away by @Chainfire: https://play.google.com/store/apps/details?id=eu.chainfire.triangleaway
Phone INFO ★Samsung★ by @vndnguyen: https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo
Mobile Odin Pro: https://play.google.com/store/apps/details?id=eu.chainfire.mobileodin.pro
Enjoy, and as always, slap that Thanks button!

Thanks for getting this up so quick!

effortless said:
Thanks for getting this up so quick!
Click to expand...
Click to collapse
NP. Hope it helps you, rolling, and whoever else might need it. :good:

toastido said:
NP. Hope it helps you, rolling, and whoever else might need it. :good:
Click to expand...
Click to collapse
@toastido Thank you once again and i slapped you a couple more thanks for good measure :good:

Is this for the update I got this morning? If so, what changed, if anything?

papeshfoo said:
Is this for the update I got this morning? If so, what changed, if anything?
Click to expand...
Click to collapse
Probably not...This is two revisions ago, it had just been requested.

toastido said:
NP. Hope it helps you, rolling, and whoever else might need it. :good:
Click to expand...
Click to collapse
quick question..ive went back and forth from samsung note 3 tmobile..and my htc m8 sprint..ive been with sprint on my htc m8 for while now and ive kinda forgotton samsung ways..or jus confused i guess..with the htc m8 they have modified firmware zips without stock recovery and without anything that would take us back to stock..what im trying to ask is..is there a odin package we could flash that can update every parition ,where i wouldnt have to start over,or re root ..just update everything to NE6 witch is the latest firmware i think..and i get to keep my custom rom and custom recovery?a single package to flash..im thinking most likely all i need is in above post nut needs flashed one by one?and it is all the NE6 most up to date firmware ?..sorry for the newbie questions..and odin is the only tool we use to flash with samsung right

lucky_515 said:
quick question..ive went back and forth from samsung note 3 tmobile..and my htc m8 sprint..ive been with sprint on my htc m8 for while now and ive kinda forgotton samsung ways..or jus confused i guess..with the htc m8 they have modified firmware zips without stock recovery and without anything that would take us back to stock..what im trying to ask is..is there a odin package we could flash that can update every parition ,where i wouldnt have to start over,or re root ..just update everything to NE6 witch is the latest firmware i think..and i get to keep my custom rom and custom recovery?a single package to flash..im thinking most likely all i need is in above post nut needs flashed one by one?and it is all the NE6 most up to date firmware ?..sorry for the newbie questions..and odin is the only tool we use to flash with samsung right
Click to expand...
Click to collapse
There isn't a way to do this while retaining the rom and root.
Also, the latest is NF9.

[Q] N7100 Help Service State: Out Of Service. And More.

Dear all,
Well I dont know where to start. But here is what happened with my N7100 Note 2.
I was on the latest 4.4.2, the phone restarted suddenly one day and it just dont boot stuck at samsung logo,
flashed the 4.4.2 stock from sammobile. and it worked fine everything was perfect for a week, till it happened again
flashed the same rom. and here is where the trouble begins.
The IMEI changed to generic 00499XXX.., Serial No: 000000
i managed to downgrade to 4.1.2 with mobile odin, flashed a lot of stocks and customs as well. And after a very hard work for a week i manage to get back my IMEI and serial number back, now I backed up my EFS learned my lesson
Now i flashed the stock rom 4.1.1, phone is unlocked. cant make calls, or sms or data internet.
Now I have service: out of service, Bluetooth address: unavailable (while its in the efs folder the mac is in the file), Device status modified, And when I connect it to USB it wont recognize the phone until I have to dial *#7284# and change USB from modem to PDA, then save and reset. (EVERYTIME) I need a permanent fix as well for that.
Please I need help with those as i cant make my phone work.
Thanks and regards,
Mohamed Selim.

First and most important:
If you ever were on stock 4.4.x you can't downgrade to 4.1.x because of knoxed bootloader.
What you did with mobile odin was no real downgrade cause your bootloader wasn't touched.
Don't try to flash firmware beyond your current bootloader version.
Install Samsung Phone Info app from play store and look for actual bootloader version.

Androidwizzard said:
First and most important:
If you ever were on stock 4.4.x you can't downgrade to 4.1.x because of knoxed bootloader.
What you did with mobile odin was no real downgrade cause your bootloader wasn't touched.
Don't try to flash firmware beyond your current bootloader version.
Install Samsung Phone Info app from play store and look for actual bootloader version.
Click to expand...
Click to collapse
Well It actually did downgrade to 4.1.2 with Mobile odin and I checked the version and Baseband and everything it was the 4.1.2
Now I am on 4.1.1 stock. rooted and trying to figure out what to do now

onix17_5 said:
Well It actually did downgrade to 4.1.2 with Mobile odin and I checked the version and Baseband and everything it was the 4.1.2
Now I am on 4.1.1 stock. rooted and trying to figure out what to do now
Click to expand...
Click to collapse
As I said before: YOU DID NOT DOWNGRADE firmware to 4.1.2 with Mobile Odin, check with Info app from Samsung:
You will find bootloader between *ND3 and *NI1 and all are 4.4.2 KitKat
So, whatever firmware you try to flash under 4.4.2 is supposed to fail.

Androidwizzard said:
As I said before: YOU DID NOT DOWNGRADE firmware to 4.1.2 with Mobile Odin, check with Info app from Samsung:
You will find bootloader between *ND3 and *NI1 and all are 4.4.2 KitKat
So, whatever firmware you try to flash under 4.4.2 is supposed to fail.
Click to expand...
Click to collapse
I am not trying to argue here, And yes I do agree with you, it failed with i tried to downgrade with windows odin all the time, but acutally never failed with mobile-odin pro latest version. you dont have to believe me, I wont lie to you. I just need a solution for the problem im having now.
Thanks.

onix17_5 said:
I am not trying to argue here, And yes I do agree with you, it failed with i tried to downgrade with windows odin all the time, but acutally never failed with mobile-odin pro latest version. you dont have to believe me, I wont lie to you. I just need a solution for the problem im having now.
Thanks.
Click to expand...
Click to collapse
Mobile Odin does everything but doesn't flash bootloader so it is like flashing a custom rom which also doesn't contain bootloader.
PC Odin flashes complete firmware, so this is the only way to really up- or downgrade. Hope you understand the difference.
The only solution I see for you is to concentrate on 4.4.2 equal or up your actual bootloader version.

Androidwizzard said:
Mobile Odin does everything but doesn't flash bootloader so it is like flashing a custom rom which also doesn't contain bootloader.
PC Odin flashes complete firmware, so this is the only way to really up- or downgrade. Hope you understand the difference.
The only solution I see for you is to concentrate on 4.4.2 equal or up your actual bootloader version.
Click to expand...
Click to collapse
I do Understand the difference, and thanks for explaining more.
But I attached About my device
But any way beside all this points, I need to fix all the problems I am having either im on 4.1.1 or 4.4.2
Thanks.

onix17_5 said:
I do Understand the difference, and thanks for explaining more.
But I attached About my device
But any way beside all this points, I need to fix all the problems I am having either im on 4.1.1 or 4.4.2
Thanks.
Click to expand...
Click to collapse
I really want to help you out and I assure you that I know what I am talking about (take a look into my signature with stock roms and bootloaders).
There is indeed no solution on 4.1.1 and the screenshot doesn't show bootloader version. To believe what I say try to find out what BL version you are on. If it shows XXUFND3 up to XXUFNI1 you have the proof.

Androidwizzard said:
I really want to help you out and I assure you that I know what I am talking about (take a look into my signature with stock roms and bootloaders).
There is indeed no solution on 4.1.1 and the screenshot doesn't show bootloader version. To believe what I say try to find out what BL version you are on. If it shows XXUFND3 up to XXUFNI1 you have the proof.
Click to expand...
Click to collapse
kay my Bootloader is: N7100XXUFND4. Android Version: 4.1.1, you are right, I kinda understand what you were talking about now.
So now im all ears, Please help me solve my problems.

onix17_5 said:
Okay my Bootloader is: N7100XXUFND4. Android Version: 4.1.1
Well now how can I solve my problems, All ears
Click to expand...
Click to collapse
XXUFND3 was the first KitKat firmware for N7100 and yours was the second.
Three options:
1) Flash firmware using PC Odin at least ND4, maybe better NE1 or up
2) Flash through recovery any stock KitKat custom rom provided by wesamothman, cosmyndemeter or me
3) Flash through recovery any KitKat custom rom you like from development section here
4.3 custom roms may work also, but not 100% sure.
Beyond 4.3 I wouldn't recommend.

Androidwizzard said:
XXUFND3 was the first KitKat firmware for N7100 and yours was the second.
Three options:
1) Flash firmware using PC Odin at least ND4, maybe better NE1 or up
2) Flash through recovery any stock KitKat custom rom provided by wesamothman, cosmyndemeter or me
3) Flash through recovery any KitKat custom rom you like from development section here
4.3 custom roms may work also, but not 100% sure.
Beyond 4.3 I wouldn't recommend.
Click to expand...
Click to collapse
Okay, I will flash a stock Kitkat custom rom provided by you, Can you please require one for me. And I will flash it through recovery now.

onix17_5 said:
Okay, I will flash a stock Kitkat custom rom provided by you, Can you please require one for me. And I will flash it through recovery now.
Click to expand...
Click to collapse
Best and fastest one is XXUFNI1, NH2 and NG3 aren't bad either.
Do a clean installation (factory reset) and after setup device go back into recovery to flash SuperSu.zip.:highfive:

Androidwizzard said:
Best and fastest one is XXUFNI1, NH2 and NG3 aren't bad either.
Do a clean installation (factory reset) and after setup device go back into recovery to flash SuperSu.zip.:highfive:
Click to expand...
Click to collapse
Okay I staterd the download for XDA_XXUFNI1.zip and the BL NH2.
I think I got it, no BL just the XDA_XXUFNI1.zip and clean install it
Okay will be back when im done

onix17_5 said:
Okay I staterd the download for XDA_XXUFNI1.zip and the BL NH2.
should I flash the NH2 with odin after the rom? , or just the Rom without the NH2?
Click to expand...
Click to collapse
No need to flash BL cause you already have KitKat BL

Androidwizzard said:
XXUFND3 was the first KitKat firmware for N7100 and yours was the second.
Three options:
1) Flash firmware using PC Odin at least ND4, maybe better NE1 or up
2) Flash through recovery any stock KitKat custom rom provided by wesamothman, cosmyndemeter or me
3) Flash through recovery any KitKat custom rom you like from development section here
4.3 custom roms may work also, but not 100% sure.
Beyond 4.3 I wouldn't recommend.
Click to expand...
Click to collapse
Okay im done with this part flashed and step up, and installed superU.
So what next

onix17_5 said:
Okay im done with this part flashed and step up, and installed superU.
So what next
Click to expand...
Click to collapse
After reboot everything should be fine: Stable, rooted, fast, right?

Androidwizzard said:
After reboot everything should be fine: Stable, rooted, fast, right?
Click to expand...
Click to collapse
Yes rooted fast everything is stable, but all the problems I said in the first post still there

onix17_5 said:
Yes rooted fast everything is stable, but all the problems I said in the first post still there
Click to expand...
Click to collapse
You mean really everything
out of service,
Bluetooth address: unavailable
Device status modified -> that's ok
USB doesn't recognize the phone

Androidwizzard said:
You mean really everything
out of service,
Bluetooth address: unavailable
Device status modified -> that's ok
USB doesn't recognize the phone
Click to expand...
Click to collapse
Yes still out of service
Bluetooth address: unavaliable
USB doesnt recognize the phone until i have to do *#7284# and change USB to PDA, this its okay but once i restarted the phone I have to do it again save and reset.

onix17_5 said:
Yes still out of service
Bluetooth address: unavaliable
USB doesnt recognize the phone until i have to do *#7284# and change USB to PDA, this its okay but once i restarted the phone I have to do it again save and reset.
Click to expand...
Click to collapse
Ok, last one is driver related to your PC (Mac or Windows?), are you running Kies?
For BT I found this APP
For the first issue I think about IMEI lost, pls check

FOH3 Modem.bin files for MDL and non MDL bootloaders

UPDATE: https://mega.nz/#!G0sUgLYQ!FLkCzuu_9MjGXuxQAZ3sGIZEGVTZLsy48v92NSZiaWQ
^^^Modem & Non-Hlos in a zip file. Extract and flash what you need.^^^
Non-Hlos <<<(need to be on [OH3] MATCHING Bootloader!)
FOR MDL BOOTLOADER FLASH ONLY THE MODEM.BIN (NOT NON-HLOS)
Everythings working, sound, calling, LTE, Wifi etc.
Steps I took in case anyone needs it: have latest samsung drivers, open odin (I used 3.04). Untick auto reboot, POWER OFF PHONE dont use reboot menu because files wont always flash correctly. Hold power + vol down to boot to download, make sure it shows up in odin. Click PDA navigate to modem.bin (if its not showing up enter ** into file name field and hit enter....poof its there) now flash it and wait until you see success. Unplug phone, Close/Reopen ODIN, Hold power to shut down, boot to download and repeat modem flash to make sure it sticks.
Make sure you have a backup of rom and current/older modem in case you want to switch it back or what not. Not a dev, just wanted to help out and give back to the community.
Thanks @shiamatsu for this thread http://forum.xda-developers.com/showthread.php?t=2544612 , no clue if sound would still be effected by non-hlos.bin on MDL
Thanks @dirkdigles for the heads up on non-hlos.bin.
(Quoted link in post #37 is for OK3 not OH3)

lordodin912 said:
https://mega.nz/#!3QAwDALL!YxOp6LsLSLlslt7WM56HKDWnako2LVxGkg6yIuDzohs
Everythings working, sound, calling, LTE etc.
Click to expand...
Click to collapse
Safe to flash on NK2?

dirkdigles said:
Safe to flash on NK2?
Click to expand...
Click to collapse
Yessir but you probably need non-hlos.bin as well

Delete

Delete

lordodin912 said:
Yessir. But you most likely need non-hlos.bin
Click to expand...
Click to collapse
Sorry if I was unclear in OP @dirkdigles

Delete

lordodin912 said:
Sorry if I was unclear in OP @dirkdigles
Click to expand...
Click to collapse
Yeah I'm on NK2 bootloader and NK2 modem. So I guess I'd need both as you say.
Thanks!

DELETED

Why the hell is everyone deleting their posts? Even if it was a dumb question or something, it'd be nice to know what not to ask.

HampTheToker said:
Why the hell is everyone deleting their posts? Even if it was a dumb question or something, it'd be nice to know what not to ask.
Click to expand...
Click to collapse
Mine were just stuff that should have been put in OP, so I moved it.

While this allows one to update to the latest baseband, does it address the stagefright fix or is the entire firmware flash needed?
Thanks,
romer_99

romer_99 said:
While this allows one to update to the latest baseband, does it address the stagefright fix or is the entire firmware flash needed?
Thanks,
romer_99
Click to expand...
Click to collapse
The entire firmware is needed. But it's a moot point if you're running a custom ROM; once you reflash your custom ROM, you're at risk if your devices dev hasn't patched the ROM.
Sent from my SGH-M919 using XDA Free mobile app

Anyone notice any signal improvements with this radio?
Sent from my GT-I9505G using Tapatalk

dirkdigles said:
Anyone notice any signal improvements with this radio?
Sent from my GT-I9505G using Tapatalk
Click to expand...
Click to collapse
It might be better or its just a placebo effect, mine seems more stable. Really need to try it in your area for yourself and see, too many different configs for this phone to be sure for everyone.

I was able to flash the modem.bin just fine. However, I'm on the NK2 bootloader, and I can't get the non-hlos.bin file to work. I've used Odin 3.04, 3.07 and 3.09, and I get a Pass message every time. According to the Phone info app, I'm still on The NK2 bootloader. I used the phone slot for the non-hlos.bin file. Has anyone else had this problem?

EMcTx said:
I was able to flash the modem.bin just fine. However, I'm on the NK2 bootloader, and I can't get the non-hlos.bin file to work. I've used Odin 3.04, 3.07 and 3.09, and I get a Pass message every time. According to the Phone info app, I'm still on The NK2 bootloader. I used the phone slot for the non-hlos.bin file. Has anyone else had this problem?
Click to expand...
Click to collapse
Its probably easier for EVERYONE not on MDL to just update with odin official firmware, then odin TWRP or whatever recovery and restore the backup you should've made. No need to re-root or what not. This post was mainly for MDL.

EMcTx said:
I was able to flash the modem.bin just fine. However, I'm on the NK2 bootloader, and I can't get the non-hlos.bin file to work. I've used Odin 3.04, 3.07 and 3.09, and I get a Pass message every time. According to the Phone info app, I'm still on The NK2 bootloader. I used the phone slot for the non-hlos.bin file. Has anyone else had this problem?
Click to expand...
Click to collapse
You can't flash non-hlos.bin on a bootloader that doesn't match. You gotta take the original TAR and do something like this guy did
http://forum.xda-developers.com/showthread.php?t=2357171

C
Sent from my draconis using Tapatalk

What is the most recent bootloader? I upgraded to the knox one already and was using NB4 non-hlos and modem.
I tested out the FOH3 non-hlos and modem and so far it seems to be working with whatever bootloader I have.

[ROM][ODIN]STOCK 5.1.1 G925TUVU2DOH6

This is really only a mirror of the download from sammobile. I have not touched the zip in any way. Same installation instruction from sammobile apply for this.
Again, I am only posting this 100% totally stock straight from Samsung ODIN flashable ROM because the download server is very slow and hopefully this will be faster for other people?
Again this is not my work, just waited the 6 hours it took to DL it and I uploaded it to share for those wanting the 5.1.1 right away.
Firmware Details (GALAXY S6 Edge)
Model SM-G925T
Model name GALAXY S6 Edge
Country USA (T-Mobile)
Version Android 5.1.1
Changelist 5551112
Build date Fri, 28 Aug 2015 06:24:51 +0000
Product code TMB
PDA G925TUVU2DOH6
CSC G925TUVU2DOH6
Flashing instructions are the same as any other ODIN flash.
INSTALLATION INSTRUCTIONS​
NOTE: AGAIN THE IS A 100% STOCK FULL ODIN FIRMWARE FLASH, IT IS NOT ROOTED. YOU WILL NEED TO FLASH THE ZIP IN ODIN AND RE-ROOT AND INSTALL RECOVERY. I HAVEN'T TESTING THIS MYSELF SO I AM NOT SURE OF WHAT ROOT METHOD WORKS
I WILL POST MORE INFO AS I GET IT.
G925TUVU2DOH6_G925TTMB2DOH6_TMB​
XDA:DevDB Information
[ROM][ODIN]DOH6, ROM for the T-Mobile Samsung Galaxy S6 Edge
Contributors
stangdriver44
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
Version Information
Status: Stable
Created 2015-09-11
Last Updated 2015-09-10

Awesome!

Link is posted.
Remember, this is not my work and is 100% fully stock ODIN file. You will have to extract the file and run ODIN to flash this. Just follow the instructions from the OP or from Sammobile's web page.
Good luck and hopefully my OZOP Rom won't take too long. Stay tuned to that thread for update info about that.

Thanks!

what a life saver. thank you

Is it better to Odin or smart switch what u guys think

Unless you want to permanently lose root I'm not sure you want to flash this 5.1.1. Has a locked bootloader
Sent from my SM-G925T using Tapatalk

nycdrifter said:
Unless you want to permanently lose root I'm not sure you want to flash this 5.1.1. Has a locked bootloader
Sent from my SM-G925T using Tapatalk
Click to expand...
Click to collapse
How so? More than the FRP lock?

ktetreault14 said:
How so? More than the FRP lock?
Click to expand...
Click to collapse
you can still install twrp no problem and everything else installs just fine afterwards. its not a big deal.

Thanks

I smart switch it and my bootloader still unlocked. ...proof in the picture don't know why Odin will be different

If I'm on 5.1.1 Tmobile S6 edge rooted with UniKernel. I can ODIN to this and reflash UniKernel to achieve root??

dEris said:
If I'm on 5.1.1 Tmobile S6 edge rooted with UniKernel. I can ODIN to this and reflash UniKernel to achieve root??
Click to expand...
Click to collapse
That's will be nice IL probably give that a try

can you still root without tripping knox after this udpate?

The weirdest thing happened to me..... I flashed the full oh6 firmware...... let everything boot wiped to factory reset in stock recovery..... Let it boot everything was showing 0h6........ then restored an old backup using twrp and it changed my baseband back to of8.... I never knew twrp would backup ur baseband....... blahhhh I guess I won't restore any backup that has of8 as a baseband now lol

gdmlaz said:
The weirdest thing happened to me..... I flashed the full oh6 firmware...... let everything boot wiped to factory reset in stock recovery..... Let it boot everything was showing 0h6........ then restored an old backup using twrp and it changed my baseband back to of8.... I never knew twrp would backup ur baseband....... blahhhh I guess I won't restore any backup that has of8 as a baseband now lol
Click to expand...
Click to collapse
Mhh that's weird

ktetreault14 said:
Mhh that's weird
Click to expand...
Click to collapse
Yea Just flashed the firmware then clean flashed the rom and is good just won't restore any of my old backups
Sent from my SM-G925F using Tapatalk

How's the battery life on this one. Previous version seemed pretty bad for me.

Battery life is pretty good,also oem bootloader unlock can be set to on if plan on rooting and using custom recovery

won't skipping system help
gdmlaz said:
Yea Just flashed the firmware then clean flashed the rom and is good just won't restore any of my old backups
Sent from my SM-G925F using Tapatalk
Click to expand...
Click to collapse
What about if you un-tick system while restoring your backup?

Odin fail

I can't flash with Odin to save my life. Tried many different combos. Comsey n official. Same thing. Tried BL on different Odins. Same result. I can't even root with sampwned. Can anyone help me? Please?
*oh Odin has an issue with my device info.
*TMO carrier and stuck on U1 firmware HD3

Also, I've already tried all of the Odin fail fixes. Doesn't work for me.

I'm actually having the same issue with my SM-G955U. I've tried several updates from both carrier specific and unlocked variants. Used Odin Comsy, 3.12.3, .5, and .7 and everything fails immediately. I've rebooted back to download mode every attempt as well, and I cannot get it for the life of me. I just used Odin on an S7 a couple days before this, but the S8+ is giving me grief. If I figure something out, I'll try to keep you posted OP. My Baseband is G955USQU1AQHD for any readers

I would really appreciated it!

kcsevo said:
I would really appreciated it!
Click to expand...
Click to collapse
try this
1) Flash the u1 firmware using prince odin.
2) Flash desired firmware using normal odin.
That should work.
One question does OTA updates work for you?

tjsooley said:
try this
1) Flash the u1 firmware using prince odin.
2) Flash desired firmware using normal odin.
That should work.
One question does OTA updates work for you?
Click to expand...
Click to collapse
I can't even refresh the U1. And OTA doesn't update.

kcsevo said:
I can't even refresh the U1. And OTA doesn't update.
Click to expand...
Click to collapse
It sounds like your original flash was a bad flash. I have a t-mobile s8+ which I flashed to U1 from 100% stock T-mobile software and I get updates just fine.
I am no ODIN expert but you may need to look into re-partitioning your device. Does knox show void?

tjsooley said:
It sounds like your original flash was a bad flash. I have a t-mobile s8+ which I flashed to U1 from 100% stock T-mobile software and I get updates just fine.
I am no ODIN expert but you may need to look into re-partitioning your device. Does knox show void?
Click to expand...
Click to collapse
Mine does indeed show that Knox is void. Same issue where I cannot flash any U1 or U update, even though this device has always remained stock. What are the steps to re-partition?

ThatGuyXP said:
Mine does indeed show that Knox is void. Same issue where I cannot flash any U1 or U update, even though this device has always remained stock. What are the steps to re-partition?
Click to expand...
Click to collapse
I have not re-partitioned a samsung device sense galaxy s2, But you would need to find the correct pit file for your device I know that much
Sent from my SM-G955U using Tapatalk