Related
Can some pls help me how can I enter the bootmenu in Universal. I tried the combination given by wiki "camera + reset " but it doesnt works for me the device just soft rests. So pls can anyone help how can I enter the bootmenu pls.
thx
jeet
to get the bootloader you need to do power off + backlight + softreset.
i got the same problem as jeet got it, i cant get into the boot menu to get a sd bakup of my complete os
greetz
http://forum.xda-developers.com/showthread.php?t=549207
i know about that thread orb3000 but we dont talk about the BOOTLOADER, we talk about the BOOT-MENU where u can bakup ure ROM from current device to an SD card
i cant get into the boot menu if i push reset+camera !!!
thats the problem
grretz
didn't know Uni had a boot-menu
I believe for backing up ROM, you can use MTTY
I'm sure it's there in the wiki somewhere
Reset your device (using the SR hole) and then HOLD the camera button tight until you get the menu.
So the key thing is to HOLD the button after you hit the reset.
DOMy
you're joshing me? I have G3 and can't do that... (On WM6.51)
It simply boots up as normal. What does this 'bootmenu' allow you to do?
Hi, a friend have 2 pda universal from vodafone that he has flashed and killed. I don´t know what happend. pda always shows USB and v1.00. After a lots o rom updates still dead, i have JAFWM, but with or without this machine is dead.
any rom especial version?
any soft?
thanks.
1. Try to restart the device in bootloader mode(Light key, power and reset pressed together)
2. Look at the display (should say Serial and version at the bottom)
3. Disable the USB connection in Active Sync otherwise the update will crash.
4. Plug in USB Cable (Screen Should now show USB at the top)
5. Start original Upgrade from your provider or take the upgrade you want to use with the MA_UpGrade_noid.exe.
6. After Flashing restart device with both soft keys at the bottom of the screen ( Buttons with - on it) pressed.
7. When asked type 0 to erase all data.
9. Device should start normally, if it doesn't do not hesitate to ask.
device always start in bootloader mode, i flash all times without problems, but when i restart device, automatically puts on bootloader mode.
after flash, make factory settings but,after this, restart in same mode.
always, when i run update program soft MaUpgradeUt_noID, detects no rom in pocket loaded.
strange problem on 2 pda´s ?
thanks
That shouldn't be a problem. Just continue to flash the rom. There could be a problem with your bootloader and the upgrade version (AKU2) you want to use.
Maybe it's a problem with bootloader.
Try it, maybe it will help you.
http://forum.xda-developers.com/download.php?id=11414
i think same as you, only problem with ROM image, but i have flashed many roms but I can´t revive device. So i ask name of Rom tht can revive pda.
Br.
PD. how i can flash the archive attached?
The rar file mentioned above is only the bootloader you already got on your device.
In your case i would use an old AKU1 rom and to see if it works.
hi guys
i have same problem. show only boot loader mode. how to use this boot loader file. wich AKU1 file is working. my phone is MDA PRO from germany T-mobile, i wan't to update ro to English. after flashing many times, many rom no result. help me
thanks a lot
Hello Siemens Man
Which Bootloader do you have ?
It would be great if you could make an backup of your bootloader then, that i could downgrade my phone and try to unlock it.(If do not know how to make an backup, thats no problem, because i can show you how to do it)
greetz
hi man
i have in boot loader mode. show me usb v1.00 only. i don't have buck up for my phone. please tell me solution how repair my phone.
thanks a lot
Did you try to update your phone to the latest orange rom for testing yet ?
If not try it out (I know it is said to be slow, but only if all orange customizations are installed) If it runs then its ok.
Otherwise try to use the exitbl.exe mentioned somewhere in this forum, hopefully it works.
connect to mtty and issue set 14 0 and then restart the device or use exitbl utility by buzz
hi guys
thank you for reply mail. all problem solved. now good working
thanks to Buzz
are there any useful hints extrem69 ?
no usb mode
What can i do of my Qtek 9000 doesen't change from Serial to USB mode?
siemens man said:
hi guys
thank you for reply mail. all problem solved. now good working
thanks to Buzz
Click to expand...
Click to collapse
I had same problem like you, can you tell me what exactly did you do so you can repaire your phone.
I used T-mobie and didn't work after upgrade rom too, it's alway stop in boot loader screen. I tried up rom of T-mobile, Imate, Dopod but nothing to work, I don't know how to repair it, it's still can up rom normaly, nothing wrong while upgrade, it's only don't work after finish.
wooooooooooooooooooow
many thanks
i tried many ways to solve this problem
with your advuse it is working now.................
Lt.Cmdr.Ivan said:
1. Try to restart the device in bootloader mode(Light key, power and reset pressed together)
2. Look at the display (should say Serial and version at the bottom)
3. Disable the USB connection in Active Sync otherwise the update will crash.
4. Plug in USB Cable (Screen Should now show USB at the top)
5. Start original Upgrade from your provider or take the upgrade you want to use with the MA_UpGrade_noid.exe.
6. After Flashing restart device with both soft keys at the bottom of the screen ( Buttons with - on it) pressed.
7. When asked type 0 to erase all data.
9. Device should start normally, if it doesn't do not hesitate to ask.
Click to expand...
Click to collapse
HI to all! I have lost bootloader upgrading my qtek 9000 vodafone.
can i to solve problem? No bootloader menu, i have tried power+reset+lamp, power+reset+camera - herd reset with - + - reset without effect. Pse help me!!! Thanks.
Dear all,
i've got 2nd hand xda stealth for 2 weeks, now my stealth cannot boot (black screen, call and End Button are light) after i flash my stealth with wrong ram with nb0 extension on miniSD. please any one can help me to recover my Stealth ?
sorry for my bad english.
xda stealth..
go to www.seeo2.com, download a rom upgrade utility from there.. then start upgrade procedure again. As xda stealth is a hybrid phone..dont try any custom roms on it..
thank's malhar for responding my thread.
i already download the upgrade rom from the o2 site (now is www.mwg.com), i put the rom to my SDCard, the problem is how can i enter the boot loader, in case my stealth always in blank screen with call and end button are light.
i already press press power + call + end button, but my stealth stuck on that condition. every method of flashing mode i already try but no response from my stealth.
Syaipul
oh yea malhar, for information i read the procedure for upgrading on o2 site that connect status is required for upgrading procedure in activecync, my stealth has disconnected status when i plug to my com. can i do the upgrade the rom in this case?
buddy, remove ur sd card from the device first..and then hard reset ur device by pressing reset button via stylus, then flag which is windows home key and then ok key..reset+flag+ok.. maintain the sequence..press reset first keep on pressing then flag and ok key.. it will format ur device.... then try to flash new rom on it
ok malhar, i'll try tomorrow. thanks.....1000x
sad-sad-sad
my stealth cannot boot (black screen, call and End Button are light) after i flash my stealth with wrong ram on miniSD. please any one can help me to recover my Stealth
Your SPL boot loader sounds like it is gone, formatted...
You may be able to patch it, using scripts & mtty if you can get into DL mode. Sounds like you're stuck in OEMSBL though.
help me !!!!
i have try pressing flat and ok botton to format . but nothing appear on the screen . is the other way to format or upgrade rom .
• The device doesn't boot, I see only O2 logo. Hard reset doesn't help and the Firmware update process stops with the first message?
1. turn off the device;
2. enter engineering mode;
3. in Main menu choose Boot Config;
4. in Configuration menu choose EBOOT-Launch Image;
5. turn off the device;
6. now hard reset or upgrade firmware.
Sometimes helps another method: leave the device without the battery for about 30 minutes, then turn your O2 XDA Stealth on.
• How to enter engeneering mode?
1. turn off your O2 XDA Stealth ;
2. hold Flag, OK and Camera + press and hold Power button;
3. use navigation buttons to select the settings.
Click to expand...
Click to collapse
follow this thread from YUC wm6
http://forum.xda-developers.com/showthread.php?t=352468
blank screen
for my case, i cant even see the o2 logo, only blank screen. is there any other way to reboot ?
cant see o2 logo
for my case, i cant even see the o2 logo, only blank screen. is there any other way to reboot ?
randysng said:
for my case, i cant even see the o2 logo, only blank screen. is there any other way to reboot ?
Click to expand...
Click to collapse
Have you tried removing the battery for few hours ??? Does the engineering mode work???
engineering mode
engineering mode ? how to set engineering mode ?
randysng said:
engineering mode ? how to set engineering mode ?
Click to expand...
Click to collapse
How to enter engeneering mode?
1. turn off your O2 XDA Stealth ;
2. hold Flag, OK and Camera + press and hold Power button;
3. use navigation buttons to select the settings
can u see..lights on keypad??what happens when u connect to pc..any sound or error
??
malhaar said:
can u see..lights on keypad??what happens when u connect to pc..any sound or error
??
Click to expand...
Click to collapse
i have a O2 tealth hanged on O2..... i tried hard reset but din work .... i downloaded new rom and software for updation .....but the problem is i cannot connect to pc.... active sync is installed...... plz help
khalifa_smart said:
i have a O2 tealth hanged on O2..... i tried hard reset but din work .... i downloaded new rom and software for updation .....but the problem is i cannot connect to pc.... active sync is installed...... plz help
Click to expand...
Click to collapse
It worked for me
Goto to your PDA setting and uncheck USB to PC.
Note: Check task before connecting to USB ensure no task including Active Sync.
FYI.
Im using VISTA Ultimate to update my XDA.
From WB 6.1 back to WM5. WM 6.1 too buggy and battery drained fast.
Cheers!
Please help me O2 stealth it dead not boot and blank screen .Are you Jtag for it please post it here.
i have the same problem --- my stealth is absolutely dead after using a cheap local charger
i have dismantled the board and taken some pics of the jtag connectors -- made the common LPT port jtag cable
how to proceed from here ?????
is the procedure similar to that of jtag recovery of a flame or an atom exec ??
how do i find the bootloader for O2 Stealth for flashing the NAND memomy Disk on Chip ??
please share your insights
I recently purchased two M88 Miphones from China (Windows Mobile 6.0 version). Both were supposed to be in English but when they were shipped to me, one was in English and the other Spanish. How can I change the language from Spanish to English? Or maybe I can install an entirely new English version of Windows Mobile 6.0? Can I extract the ROM from the English one and use it for the other (Spanish) one? Please help. Thanks.
It's great to find a way to install or restore the Windows on M88. My one just died. I haven't access to anything but the "phone" functions, so i need to restore it somehow from my PC. Some advices?
snakemountain said:
I recently purchased two M88 Miphones from China (Windows Mobile 6.0 version). Both were supposed to be in English but when they were shipped to me, one was in English and the other Spanish. How can I change the language from Spanish to English? Or maybe I can install an entirely new English version of Windows Mobile 6.0? Can I extract the ROM from the English one and use it for the other (Spanish) one? Please help. Thanks.
Click to expand...
Click to collapse
Hi, I think there is a way to change your Windows to English. I received the same phone with the same problem. I wrote to the supplier and they respond with the decision: they provided the original english WM6 ROM for M88 MiPhone on the website, so you can download it from here: http://rapidshare.com/files/168534489/DX.SKU16783.UPDATE.ENGLISH.AUG01.rar
But my problem is that I can't go in to the bootloader mode - just don't know how so to start loading the Windows OS. The instructions on the site are very poor and don't work. So I'm stuck again. Here there are the instructions:
"English OS System 20080801 Edition (ROM image) available for download
- To update ROM, format your TF card with FAT32 and unzip all files and folders from the downloaded file into the root folder of the TF card. Then, restart the phone to begin updating. This update converts all non-English versions of this phone into English version."
And some more instructions from my correspondence with the supplier, which shows different way of putting the phone in to the bootloader mode:
"we have a better idea to solve this inconvenience for you
we had updated a file on our website for you
you can download it and put it in your memory card to update the language into English.
you can put the file in the memory card no need to creat a folder for it
and insert the card into your cellphone
press the power bottom and the home bottom together
a few second later there would be a message on the screen shows you can press the home bottom again to restart the cellphone"
So maybe you can see they are showing different ways to enter the boot loader. Neidher 2 of them are working for me.
Since I have this phone I didn't find a way to enter the bootloader mode! I tried every combination between the keys but NOTHING! The only thing what I can do with the buttons is SWITCH OFF, SOFT RESET AND HARD RESET.
Please if somebody discover how to do that on that phone -M88 to share here with the rest of us!
Best of luck!
teddy_irish said:
Hi, I think there is a way to change your Windows to English. I received the same phone with the same problem. I wrote to the supplier and they respond with the decision: they provided the original english WM6 ROM for M88 MiPhone on the website, so you can download it from here: http://rapidshare.com/files/168534489/DX.SKU16783.UPDATE.ENGLISH.AUG01.rar
But my problem is that I can't go in to the bootloader mode - just don't know how so to start loading the Windows OS. The instructions on the site are very poor and don't work. So I'm stuck again. Here there are the instructions:
"English OS System 20080801 Edition (ROM image) available for download
- To update ROM, format your TF card with FAT32 and unzip all files and folders from the downloaded file into the root folder of the TF card. Then, restart the phone to begin updating. This update converts all non-English versions of this phone into English version."
And some more instructions from my correspondence with the supplier, which shows different way of putting the phone in to the bootloader mode:
"we have a better idea to solve this inconvenience for you
we had updated a file on our website for you
you can download it and put it in your memory card to update the language into English.
you can put the file in the memory card no need to creat a folder for it
and insert the card into your cellphone
press the power bottom and the home bottom together
a few second later there would be a message on the screen shows you can press the home bottom again to restart the cellphone"
So maybe you can see they are showing different ways to enter the boot loader. Neidher 2 of them are working for me.
Since I have this phone I didn't find a way to enter the bootloader mode! I tried every combination between the keys but NOTHING! The only thing what I can do with the buttons is SWITCH OFF, SOFT RESET AND HARD RESET.
Please if somebody discover how to do that on that phone -M88 to share here with the rest of us!
Best of luck!
Click to expand...
Click to collapse
Hi, I'm From Brazil
I'm selling this phone here in my country.
I think I've got same problem here. But I've tried to get bootscren and it seems to be that procedure correct.
Once you shutdown the phone first remove it battery for 10 seconds, and than put back into the phone. Than press power and home(that center buttom) until phone show 2 messages(one for master boot and other for clear boot).
After this message you may release power buttom and keep pressing home buttom untill phone shows it boot screen.
You will face a "downloading program, please wait" message on phone screem
But be extremelly carefull than, make sure you have a power cable attached to the phone and it battery at least 90% charged because update took lot of time sometimes.
I'm telling that because today I have one M88 "dead" in my hands because I did not followed all this procedure and after 35 minutes, by mystake I pressed reset buttom.
Now my phone not even turns on, nor charge it battery, is dead.
But I think using one of those "BOX" devices I will ressucitate it!
Thanks m8!
The thing is that when I press the 2 buttons at once I can only get blue screen for less than 1 second and after that Windows is loading. When it is done - the phone is after hard reset. I've tried hundreds of times - always the same. I can't get messages asking me to load software - only hard reset is the result. I've tried any other combination, including the reset buton under the cover, next to USB, but never managed to enter the service mode or boot mode or whatever it is.
One week I'm wasting my time in doing hundreds of attemts to enter the bootloader and nothing! How then do you make a hard reset on the M88?
Do you thing if I can use backup from english version of the same model that will change the situation - the spanish will be substituted by english? And if it's possible can you upload such a backup, made by Spb backup software for me, please?
Best regards
I have stupid problem. Some files disappeared, some programs stopped working and the entire system blocked. I made many soft and hard resets, which fixed the things... for a while. After one hour it's blocking again, without any settings, or interventions.
I downloaded the ROM, created a "root" folder in the card and unzipped everything there.
The thing is that it ROM-boot looks too fast - only couple of minutes. Can it be?
teddy_irish said:
Thanks m8!
The thing is that when I press the 2 buttons at once I can only get blue screen for less than 1 second and after that Windows is loading. When it is done - the phone is after hard reset. I've tried hundreds of times - always the same. I can't get messages asking me to load software - only hard reset is the result. I've tried any other combination, including the reset buton under the cover, next to USB, but never managed to enter the service mode or boot mode or whatever it is.
One week I'm wasting my time in doing hundreds of attemts to enter the bootloader and nothing! How then do you make a hard reset on the M88?
Do you thing if I can use backup from english version of the same model that will change the situation - the spanish will be substituted by english? And if it's possible can you upload such a backup, made by Spb backup software for me, please?
Best regards
Click to expand...
Click to collapse
I think I can do that,
but in one and half week because I'm still waiting for the flashing box and their cables.
Once I get I will upload it here.
ZEMONTI said:
I have stupid problem. Some files disappeared, some programs stopped working and the entire system blocked. I made many soft and hard resets, which fixed the things... for a while. After one hour it's blocking again, without any settings, or interventions.
I downloaded the ROM, created a "root" folder in the card and unzipped everything there.
The thing is that it ROM-boot looks too fast - only couple of minutes. Can it be?
Click to expand...
Click to collapse
Go ahead
But be pretty calm when performing update or you gonna get a bricked phone.
But is it possible that the update takes only few minutes? Or i'm doing only hard reset?
It is possible the update to take only few minutes
ZEMONTI said:
But is it possible that the update takes only few minutes? Or i'm doing only hard reset?
Click to expand...
Click to collapse
Hi from Ireland!
Yes it's possible. Today I finally managed to make the update - it took only 3 minutes. Now I have English OS on my M88!
It's a really nice phone isn't it?
Regards
teddy_irish said:
Hi from Ireland!
Yes it's possible. Today I finally managed to make the update - it took only 3 minutes. Now I have English OS on my M88!
It's a really nice phone isn't it?
Regards
Click to expand...
Click to collapse
That's good news!
Yes It is!
How to install WM6 ROM - English version on M88 MiPhone from SD card
Please download the original ROM from here
I was adwised to do this:
1. Duplicate the update.img file and rename the second one as "uploader"
2. Copy both "update.img" and "uploader" on the SD - formatted in FAT32
3. Press POWER and HOME butons at the same time.
4. There are two possible options from here:
a) White screen with blue text showing "Upload image... please wait..."
b) Red screen with the options what to do in the next step -
5. I saw first the a) option - the white screen. So after 3 minutes of waiting the phone said it is done and it will selfrestart.
After the restart it will load the English OS on your M88
Enjoy
the mine is dead too.
stenatay said:
hi, i'm from brazil
i'm selling this phone here in my country.
I think i've got same problem here. But i've tried to get bootscren and it seems to be that procedure correct.
Once you shutdown the phone first remove it battery for 10 seconds, and than put back into the phone. Than press power and home(that center buttom) until phone show 2 messages(one for master boot and other for clear boot).
After this message you may release power buttom and keep pressing home buttom untill phone shows it boot screen.
You will face a "downloading program, please wait" message on phone screem
but be extremelly carefull than, make sure you have a power cable attached to the phone and it battery at least 90% charged because update took lot of time sometimes.
I'm telling that because today i have one m88 "dead" in my hands because i did not followed all this procedure and after 35 minutes, by mystake i pressed reset buttom.
Now my phone not even turns on, nor charge it battery, is dead.
But i think using one of those "box" devices i will ressucitate it!
Click to expand...
Click to collapse
i am passing through the same. What do you mean with box. I need to ressuciatate it
please.
[email protected]/ [email protected]
helllp
stenatay said:
hi, i'm from brazil
i'm selling this phone here in my country.
I think i've got same problem here. But i've tried to get bootscren and it seems to be that procedure correct.
Once you shutdown the phone first remove it battery for 10 seconds, and than put back into the phone. Than press power and home(that center buttom) until phone show 2 messages(one for master boot and other for clear boot).
After this message you may release power buttom and keep pressing home buttom untill phone shows it boot screen.
You will face a "downloading program, please wait" message on phone screem
but be extremelly carefull than, make sure you have a power cable attached to the phone and it battery at least 90% charged because update took lot of time sometimes.
I'm telling that because today i have one m88 "dead" in my hands because i did not followed all this procedure and after 35 minutes, by mystake i pressed reset buttom.
Now my phone not even turns on, nor charge it battery, is dead.
But i think using one of those "box" devices i will ressucitate it!
Click to expand...
Click to collapse
help me, the mine is dead.
how per-say?
teddy_irish said:
Hi from Ireland!
Yes it's possible. Today I finally managed to make the update - it took only 3 minutes. Now I have English OS on my M88!
It's a really nice phone isn't it?
Regards
Click to expand...
Click to collapse
how persay did u get past the blue screen?
hello I am of chili and my m88 non reconose the card of cellular neither the icon of the cellular one needs urgent operative elsistema and the program and naturally like one makes before hand thank you
Hello every one,
I have this phone too, I trying to find any way or a cab to send the audio from the Fm radio app to the bluetooth headset, but no progrees, it only works with the original eraphones,
Any one have an a idea woh to do it?,
Regsards.
Javier.
jaguerra said:
Hello every one,
I have this phone too, I trying to find any way or a cab to send the audio from the Fm radio app to the bluetooth headset, but no progrees, it only works with the original eraphones,
Any one have an a idea woh to do it?,
Regsards.
Javier.
Click to expand...
Click to collapse
Me too. I was intending to lessen some audio-books.
Does it requires some additional software?
so how did it go and whats the name of the box i need one kinda kill my phone as well
please give info if u have it
M88 english bootloader
Here is the fix, sponsored by wirelessandmorestore.com
Copy both of these files to your computer.
http://uploading.com/files/YE6JJ36Y/update.img.html
http://uploading.com/files/TA1N0MBA/uploader.img.html
Plug in your phone and copy them to the SD card.
Turn the phone off.
Press the button on the top and the round button on the face at the same time and continue to hold it. As you are holding it, the phone will turn and go thorugh a couple steps before it says something like 'downloading image' or 'updating image' something like that.
Once it gets to that screen, you can let go of the buttons and the phone will update and reboot. This will take a couple of minutes. It will be in English when it turns itself back on and loads Windows.
Here's the thing , I unlocked my bootloader and rooted my phone a while back (probably using an already outdated software , if i remembered correctly it was 2.3.3 , but i knew i followed the instructions here
http://forum.xda-developers.com/showthread.php?t=1133650)
Today, my phone asked if I wanted to update the software (like an automated software update) and i could choose to update or not and i chose yes but now , my phone won't start up for like 3 hours already . I tried turning it on but it won't turn on , i tried charging it but there isn't any lights which was supposed to be there .
So I decided to google it and i followed the instructions here
http://talk.sonyericsson.com/thread/26720
but after installing both , choosing my phone , followin the instructions on update service , it gets stuck on "it contains a modified software that cannot be updated" so decided to come back here to ask you guys what I should do .
Right now , all I want to do is for my phone to start up again , any ideas ?
edit : right now , i took out the battery , and put it back in . This time when I tried to turn it on , the vibrate is there which wasn't there initially and theres 1 flash of the green light on the side of the phone .
and also , i think its recognized by the computer because i can hear the sound notification (the same sound when you plug a USB into a computer) which wasn't there before I did the update service thingy .
edit 2 : it won't go into safemode either when i tried clicked the right and left buttons below the display (the menu and back button) and the power button after that . yes i tried reinserting the battery .
edit 3 : I'm not sure if this'll help but my phone is recognized as SEMC flash device (i checked on device manager) and theres a green colour non flashing light when i plug my phone into the pc .
http://forum.xda-developers.com/showthread.php?t=1304634
OMG
Thanks
Sorry for not searching , I tried looking for Xperia arc won't load up / start up but it didn't give me this thread .
Thanks again
edit : i thanked you too
same problem!!!
Guys, I was trying to modify my phone so that applications would be saved in memory card instead of internal storage, so I rooted it and stuff.. Now it won't turn on!!! When I switch it on, it shows the SE logo and does nothing else.. I tried to enter the safemode menu (holding left and right keys when switching on, or volume down key and home key when turning on) but nothing works!!! I'm like desperate now so any help would be really appreciated!
gadjet87 said:
Guys, I was trying to modify my phone so that applications would be saved in memory card instead of internal storage, so I rooted it and stuff.. Now it won't turn on!!! When I switch it on, it shows the SE logo and does nothing else.. I tried to enter the safemode menu (holding left and right keys when switching on, or volume down key and home key when turning on) but nothing works!!! I'm like desperate now so any help would be really appreciated!
Click to expand...
Click to collapse
Try to flash a new(er) kernel with recovery and install a new rom (your phone is ota-bricked, so if that doesn't work, search on XDA)
Sent from my LT18i using xda premium