Develop Bugs

CyanogenMod 11 with 3.4 kernel by lenghonglin (LU6200)

Thanks for miroslav_mm's kernel source .
change log(the same with miroslav_mm)
Changes in the system:
* Mass Updates CM;
* Update to Android 4.4.4 - KTU84P
* Bionic NEON optimization;
* Fix ffmpeg codec conflicts;
* Etc.
Click to expand...
Click to collapse
BUGS:
1.Front camera is not working,
2.weakness vibrator
3.report to me
Installation Instructions:
1.update your recovery to 6.0.4.x
2. Put the files on SD card.
3. Reboot to recovery.
4. Do factory reset (ie. format /data, /cache, /sd-ext and /sdcard/.android_secure)
5. Flash ROM
6. Reboot
Click to expand...
Click to collapse
Download link for ROM
http://pan.baidu.com/s/1pJCyvcn
pass: 65am
If you want to support me ,just pay for a cup of cofface (paypal:[email protected]):fingers-crossed::fingers-crossed:
sorry for my poor english

lenghonglin said:
Thanks for miroslav_mm's kernel source .
This rom can normally use,But there still have a little bugs:
1.Front camera is not working,
2.weakness vibrator
3.report to me
Click to expand...
Click to collapse
i am using this roms. flashed it yesterday. its good.best thing is based on 3.4 kernel
still.........
rom lags some time...but its fully functional for daily use,
1. Camera working good full hd supported. but not better than original lg cam.
2. battery life is better than other cyanogenmod but not better than sphinx 4.1 or v30d roms
3. custom cpu seting.
4. root working
5. what u can do is replace camera with JB custom camera for cyanogenmod, its better.
few screen shots

chinese？

abuulala said:
i am using this roms. Flashed it yesterday. Its good.best thing is based on 3.4 kernel
still.........
Rom lags some time...but its fully functional for daily use,
1. Camera working good full hd supported. But not better than original lg cam.
2. Battery life is better than other cyanogenmod but not better than sphinx 4.1 or v30d roms
3. Custom cpu seting.
4. Root working
5. What u can do is replace camera with jb custom camera for cyanogenmod, its better.
download link for rom
http://pan.baidu.com/s/1pjcyvcn
pass: 65am
u have to flash it through cwm recovery 6.0.4.5
after full 4 wipes
few screen shots
Click to expand...
Click to collapse
中国人？

lenghonglin said:
中国人？
Click to expand...
Click to collapse
i cant understand u. im a Pakistani.
i downloaded it from a chinese site and im using it.

abuulala said:
i cant understand u. im a Pakistani.
i downloaded it from a chinese site and im using it.
Click to expand...
Click to collapse
I am sorry that i think you are chinese ,Why do you konw i post this thread with 3.4 kernel so fast?:laugh:

lenghonglin said:
I am sorry that i think you are chinese ,Why do you konw i post this thread with 3.4 kernel so fast?:laugh:
Click to expand...
Click to collapse
i saw this post on some chinese site. and then used google translator and followed it for few days and got this rom link. its an excellent kit kit rom. best so far. thanks for all the work.

i am using this rom its 3rd day now. everything working great. it is the KITKAT rom we all been waiting for.

abuulala said:
i am using this rom its 3rd day now. everything working great. it is the KITKAT rom we all been waiting for.
Click to expand...
Click to collapse
I will build cm10.1 with 3.4 kernel soon

Link Down, Any Mirror or someone can re-upload it.

Yes, the link is dead. Please upload on mediafire or google drive.

sixline said:
Yes, the link is dead. Please upload on mediafire or google drive.
Click to expand...
Click to collapse
took a long time, due to slow internet.
here it is...............
https://drive.google.com/file/d/0B9raPQozMhCMc2plMVoxSnpJUzA/edit?usp=sharing

OP (or anyone else) have you tried switching to ART? What is the performance and battery life on ART?

sixline said:
OP (or anyone else) have you tried switching to ART? What is the performance and battery life on ART?
Click to expand...
Click to collapse
i was using it on dalvik myself, and dalvik is default setup, has switched to ART to try this feature. Its working great, will assess it and post about it after some use in 1 or 2 days.

ART is running smooth, don't use xposed framework because even in dalvik or ART, device become laggy

Yeah I know that, thanks.

sixline said:
Yeah I know that, thanks.
Click to expand...
Click to collapse
after using ART some softwares become incompatible. like my titanium backup is not running now and Lg JB camera moded for cyanogenmod is not running/ cant install it again.

abuulala said:
took a long time, due to slow internet.
here it is...............
https://drive.google.com/file/d/0B9raPQozMhCMc2plMVoxSnpJUzA/edit?usp=sharing
Click to expand...
Click to collapse
Thanks a lot Buddy, Much Appreciate-able... :cheers: :good:

Still abit laggy and camera is really suck ! But battery is better ...
Sent from my LG-LU6200 using Tapatalk 2

-ss- said:
Still abit laggy and camera is really suck ! But battery is better ...
Sent from my LG-LU6200 using Tapatalk 2
Click to expand...
Click to collapse
change camera to lg JB camera for cyanogen. link in this forum i think sixline rom thread

[Q&A] [ROM][4.4.2][e975] MIUI v5 (4.9.26) - LG France Kitkat v20B based

Q&A for [ROM][4.4.2][e975] MIUI v5 (4.9.26) - LG France Kitkat v20B based
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:

huy_gm said:
Waiting them to release miui 6
Click to expand...
Click to collapse
forecast for version 6?

When will be miui v6?

Desejado said:
forecast for version 6?
Click to expand...
Click to collapse
xamx123 said:
When will be miui v6?
Click to expand...
Click to collapse
I expect some delay and no news from MIUI forum yet. Their porting team should be the first group to release v6 for none Mi devices. From many v6 user feedback there are many features that lack in v6 and it will take sometime to add it back.

1 How can i desable the MIU Update finder??? I keeps poping up at the status bar notification.
Edit: found it ?
2 i have Solid Kernel v1.2 but my phone dont go to deep sleep ? Rom problem?
Thanks
Sent from my LG-E975 using XDA Free mobile app

Use stock kernel for me its better than solid and jolla

toybxb said:
1 How can i desable the MIU Update finder??? I keeps poping up at the status bar notification.
Edit: found it ?
2 i have Solid Kernel v1.2 but my phone dont go to deep sleep ? Rom problem?
Thanks
Sent from my LG-E975 using XDA Free mobile app
Click to expand...
Click to collapse
2.
I also use stock kernel because in Solid kernel thread there are some posts about problems v1.1 & 1.2. Maybe you should use Solid kernel 1.0 or wait for next release.

OPGF180
can i install in F180 ver S ?

EmHip said:
can i install in F180 ver S ?
Click to expand...
Click to collapse
I'm not sure what is different between F180 variants but some user can install it on F180. You can find more information in my 2nd post here http://forum.xda-developers.com/showpost.php?p=54631217&postcount=2.

Thanks artit :thumbup:
Sent from my LG-E975 using XDA Free mobile app

MIUI v5 (4.9.26) for LGOG e975
Will this work on LG E970?

LG E970
Will anyone please tell me if it will work on an E970? If not, can it be done and how? Or should I wait for v6?

Any news ? Miui is best ROM o ever used

xamx123 said:
Any news ? Miui is best ROM o ever used
Click to expand...
Click to collapse
I agree. MIUI is a great rom. I am using 4.4.25 android version 4.2.2. I want to upgrade my version, but it seems like no one is working on an e970 version anymore. I would like to know how (step by step) because I am a total novice to get this to work for an e970, but no one is answering the Q&A.

NO sim detected
Please help, miui don´t detect my SIM

pedromanzana said:
Please help, miui don´t detect my SIM
Click to expand...
Click to collapse
You have to install latest philz touch recovery.

ondrej97 said:
You have to install latest philz touch recovery.
Click to expand...
Click to collapse
Can you pass me a link?
UPDATE: it´s ok, I found it

[Q&A] [ROM][4.4.4][I9190/I9195][UNOFFICIAL] MIUIv5 KitKat 4.8.24 (Update 21.10.2014)

[Q&A] [ROM][4.4.4][I9190/I9195][UNOFFICIAL] MIUIv5 KitKat 4.8.24 (Update 21.10.2014)
Q&A for [ROM][4.4.4][I9190/I9195][UNOFFICIAL] MIUIv5 KitKat 4.8.24 (Update 21.10.2014)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:

small question regarding Miui
First of all I want to thank you for this great rom. I like it very much and i see that is very stable and it has a great battery life.
there is only one thing that i don't understand. why the device doesn't wake up when i press the home button? it's a setting that i didn't checked? or it's a bug? has anybody experienced this?
a good day to you all!

gigiion said:
First of all I want to thank you for this great rom. I like it very much and i see that is very stable and it has a great battery life.
there is only one thing that i don't understand. why the device doesn't wake up when i press the home button? it's a setting that i didn't checked? or it's a bug? has anybody experienced this?
a good day to you all!
Click to expand...
Click to collapse
flash this View attachment wakeup.zip

MIUI Root Missing
im really enjoying this rom but i cant seem to get it rooted so in your next update or this rom can you add root into it so that it is pre-installed.

Rom is rooted,only that is not enabled. Select Security (icon is on home screen - bottom right) then click on Permissions and enable root.
I tested this ROM on my i9192 and except no SIM is detected, rest of the functions (not SIM related) are working
Sent from my GT-I9192

narkoman88 said:
flash this View attachment 2979969
Click to expand...
Click to collapse
Thank you very much. Now it works and also the flashligt (by long-pressing the home button in lockscreen). :good:
On the last version it's necessary to flash that .zip also or it's included?
Have a nice day!

gigiion said:
On the last version it's necessary to flash that .zip also or it's included?
Click to expand...
Click to collapse
No

Would you please add Turkish language?

axman79 said:
Rom is rooted,only that is not enabled. Select Security (icon is on home screen - bottom right) then click on Permissions and enable root.
I tested this ROM on my i9192 and except no SIM is detected, rest of the functions (not SIM related) are working
Sent from my GT-I9192
Click to expand...
Click to collapse
Thank you, i will do that when i have turned my device on. thx for the help.

Is it possible to add support for I9192 including dual sim support?

rentboy71 said:
Is it possible to add support for I9192 including dual sim support?
Click to expand...
Click to collapse
no

music player
hi, i have updated to the most recent update and now find that the music player has stopped working and wont play. and also there are some bugs in the miui tools on trying to set a custom carrier label it just force closes.
would you be able to fix these things soon as i use the music player on my phone alot but am keeping this rom as a daily driver because of how stable it is.

Turkish language please

Thanks for the firmware its running great i would like a all English version the market and also the dial pad have other languages.

Seems to be a bug when selecting Prefer 4G networks it resets to 3G after turning off the phone.

liveordie said:
Seems to be a bug when selecting Prefer 4G networks it resets to 3G after turning off the phone.
Click to expand...
Click to collapse
Yes, the same here. Once I reboot, I should change it to LTE manually.

Note:
Xposed module Intelli3g works a treat with built-in WSM tools ( xposed framework port).
Sent from my GT-I9195 using Tapatalk

Hello
@narkoman88
Is there a way when sync is pressed in toggles, it actually turns off/ on syncing? Instead of just turn on one time when pressed.
Thanks.
Sent from my GT-I9195 using Tapatalk

Can we get a MIUIv6 port please this version locks up when using custom themes.

liveordie said:
Can we get a MIUIv6 port please
Click to expand...
Click to collapse
Source miuiv6 unavailable - port not possible.
liveordie said:
this version locks up when using custom themes.
Click to expand...
Click to collapse
not true, rom works fine.

[Q&A] [ROM] [4.4.2] [Optimus G all variants] Sling Kahroba Edition (Final version)

[Q&A] [ROM] [4.4.2] [Optimus G all variants] Sling Kahroba Edition (Final version)
Q&A for [ROM] [4.4.2] [Optimus G all variants] Sling Kahroba Edition (Final version)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] [4.4.2] [Optimus G all variants] Sling Kahroba Edition (Final version). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

hi akahroba this very great rom i install the rom but my mobile data not switched on what can ido

Kahroba PLease Fix the Sensor
Dear Kahroba.
i am new here and i am currnetly using Blueberry sling ROm and now i want to go on for your ROM but my boot loader is lock so how can i unlock it and second when i use auto brightness, it make the screen darker and invisible so how can i fix this problem

SAFI_AFRIDI said:
Dear Kahroba.
i am new here and i am currnetly using Blueberry sling ROm and now i want to go on for your ROM but my boot loader is lock so how can i unlock it and second when i use auto brightness, it make the screen darker and invisible so how can i fix this problem
Click to expand...
Click to collapse
You don't need to unlock your BL. just choose locked bootloader in the aroma installer. for darkness, either untick auto or go under light

How to Rest that light ambient sensor
akahroba said:
You don't need to unlock your BL. just choose locked bootloader in the aroma installer. for darkness, either untick auto or go under light
Click to expand...
Click to collapse
Can you send me a link or a command to reset that sensor because if i go under 20% its light goes off so i want it to make it till 0%

SAFI_AFRIDI said:
Can you send me a link or a command to reset that sensor because if i go under 20% its light goes off so i want it to make it till 0%
Click to expand...
Click to collapse
There's no such a problem here. the screen never goes off even on 0% light. and the auto brightness is always like auto brightness in every phones. Don't get what your problem is.

Any Suggestions
akahroba said:
There's no such a problem here. the screen never goes off even on 0% light. and the auto brightness is always like auto brightness in every phones. Don't get what your problem is.
Click to expand...
Click to collapse
I know that this is not on a normal phone but it is just because there is some mal functioning in my phone but if i want to reset this sensor so any software or command and now currently i am using your Rom quite fast but one thing missing that there is no option like Sling OTA update, it will be very good if you add this option.

SAFI_AFRIDI said:
I know that this is not on a normal phone but it is just because there is some mal functioning in my phone but if i want to reset this sensor so any software or command and now currently i am using your Rom quite fast but one thing missing that there is no option like Sling OTA update, it will be very good if you add this option.
Click to expand...
Click to collapse
yes. I removed it. It is good when there is an OTA update. Otherwise, it's useless.

kernel
is this kernel (Solid_Kernel_V1.81STOCK-KK) compatible with this rom? someone told me that adding this you will have tap to sleep/wake working.

Can I install the them of ART mode for LG G
Dear Kahroba,
can i flash the Art Mode themehttp://forum.xda-developers.com/optimus-g-intl/themes-apps/theme-artmod-black-edition-v1-t3044533 on your ROM. if not then please try to modified it for your ROM.

Your ROM is a bit hungry as compare to Blue berry
Dear Abbas i am currently Using your Rom and i have notice one thing that it consume more power than Sling blue berry ROM but rather than this your ROM work Perfectly and keep in mind i have also install Greenify Too for reducing battery draining and thanks for updating all the LG apps like Keyboard and all others.

Help E975 kernel
Can you please give a link for best kernel for sling rom? Thanks in advance

Can i update from older version to "Post Final Release 5/30/2015" without full wipe? thanks

djdubpt said:
is this kernel (Solid_Kernel_V1.81STOCK-KK) compatible with this rom? someone told me that adding this you will have tap to sleep/wake working.
Click to expand...
Click to collapse
Yes
SAFI_AFRIDI said:
Dear Kahroba,
can i flash the Art Mode themehttp://forum.xda-developers.com/optimus-g-intl/themes-apps/theme-artmod-black-edition-v1-t3044533 on your ROM. if not then please try to modified it for your ROM.
Click to expand...
Click to collapse
No
SAFI_AFRIDI said:
Dear Abbas i am currently Using your Rom and i have notice one thing that it consume more power than Sling blue berry ROM but rather than this your ROM work Perfectly and keep in mind i have also install Greenify Too for reducing battery draining and thanks for updating all the LG apps like Keyboard and all others.
Click to expand...
Click to collapse
I don't think so. I tried to remove something whenever I added something to scale RAM and battery consumption.
aljulie said:
Can you please give a link for best kernel for sling rom? Thanks in advance
Click to expand...
Click to collapse
The best is stock and already implemented.
nhatanh0603 said:
Can i update from older version to "Post Final Release 5/30/2015" without full wipe? thanks
Click to expand...
Click to collapse
Yes
Sent from my Optimus G using Tapatalk

Facebook Force Closed
Dear Abbas i also notice that facebook crash on video playback but it close when we press back button while the video is in play mode. but the problem is not in your ROM because after the last update of Facebook i face this,, before its working fine, i mean on the previous Version of Facebook its working very Well.

Camera fc
Hi i have problem with camera in panoramic mode. When i press it then camera app is force closed. Can someone help? I have logcat:

wolverine2468 said:
Hi i have problem with camera in panoramic mode. When i press it then camera app is force closed. Can someone help? I have logcat:
Click to expand...
Click to collapse
Seems you're not using the latest release. It was fixed in last one.
Sent from my Optimus G using Tapatalk

akahroba said:
Seems you're not using the latest release. It was fixed in last one.
Sent from my Optimus G using Tapatalk
Click to expand...
Click to collapse
Ok thx true i now install the last one version and now all is working thx for help.

how to hide mobile data icon?
Hi akahroba, how can I do to hide mobile data icon when turnoff mobile data?
Thanks

Thank you, I am for deodex, but whether the system will load slower? Odex is faster. The hidden menu I myself established - nothing fancy

[Q&A] [ROM][OFFICIAL][DISCUSSION] MIUI V6 5.7.2 for Galaxy Nexus (GSM)

Q&A for [ROM][OFFICIAL][DISCUSSION] MIUI V6 5.7.2 for Galaxy Nexus (GSM)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][OFFICIAL][DISCUSSION] MIUI V6 5.7.2 for Galaxy Nexus (GSM). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

New build 5.7.10 is out!

Google Keep
I tried, it worked perfectly. I'm having, all the time, unfortunately the google services has stopped, it's irritating.

L0u156 said:
I tried, it worked perfectly. I'm having, all the time, unfortunately the google services has stopped, it's irritating.
Click to expand...
Click to collapse
Really?
It didn't appear when I use.
What version are you running?
Sent from my LG G3 using XDA Mobile app

The zip is called "gapps_kitkat_minimal-20150410", I used to flash them for all over the time, with KK roms, and have not noticed this message. For me the rom with franco kernel is smooth enough, and soo beautiful, I'm in love with the UI. I will try today with another gapps package. Please send me PM, becuause I can not see the posts in this thread.
Sorry for my english.
Have a nice day !

I tried the rom , it's fast enough for daily use and very nice but I was not able to install the franco kernel . The installation hangs . Other kernels can use?
I also had problems connecting the MiBand via bluetooth . Does anyone know help me ?
If I can not solve the problem , unfortunately I can not keep the rom .
Thank you all!
---------- Post added at 11:00 AM ---------- Previous post was at 10:54 AM ----------
I tried the rom , it's fast enough for daily use and very nice but I was not able to install the franco kernel . The installation hangs . Other kernels can use?
I also had problems connecting the MiBand via bluetooth . Does anyone know help me ?
If I can not solve the problem , unfortunately I can not keep the rom .
Thank you all!

3g not working.
Someone had a problem with 3g? Is not working here.
I installed the 5.7.17 version.
3g - Vivo - Brazil

I use Miui 5.7.9 on nexus 5. When selecting the clock widget, it crashes immediately.
Sent from my Nexus 5 using XDA Free mobile app

5.7.24 build
Hi Genie,
i've run 5.7.24 builds, found little problem:
1. latest franco on your 2nd thread working not properly, themes-updater force closing
2. Service provider always show "No Service" at status bar, but actually connect
can you advise how to solve point 2?

I've run 5.7.24 . the ROM is fast , I'm using it with fancy 60. I confirm that there is a root . But battery life is slightly bad.
with franco kernel there is FC me too
Good Work anyway!

@Genie's
it's possible download only the incremental pack and flash it on recovery or i need download the full rom? i run the 24.7 with stock kernel.
if yes, wype only cache and dalvik right?
thanks

Mauritos said:
@Genie's
it's possible download only the incremental pack and flash it on recovery or i need download the full rom? i run the 24.7 with stock kernel.
if yes, wype only cache and dalvik right?
thanks
Click to expand...
Click to collapse
I think you should download the full rom.
나의 SHV-E300S 의 Tapatalk에서 보냄

miui v6 on GNex and Miband
Does anyone tried to connect a Miband under miui v6 ? Is the ble module working ?
thanks

mistervulp said:
Does anyone tried to connect a Miband under miui v6 ? Is the ble module working ?
thanks
Click to expand...
Click to collapse
Yes it working well..i'm running v6 with stock kernel and no problem with connect a miband with ufficial xiaomi app.

Mauritos said:
Yes it working well..i'm running v6 with stock kernel and no problem with connect a miband with ufficial xiaomi app.
Click to expand...
Click to collapse
are you running the latest version ? does the theme and other apps crash without even opening them ?

djkk16 said:
are you running the latest version ? does the theme and other apps crash without even opening them ?
Click to expand...
Click to collapse
Yes, I use the latest version. I had FC when I'm using the francoe kernel. I think the stock kernel is better. or you can try the dirty-v sr that's good too.

Mauritos said:
Yes, I use the latest version. I had FC when I'm using the francoe kernel. I think the stock kernel is better. or you can try the dirty-v sr that's good too.
Click to expand...
Click to collapse
so you are using it on ext4 data ?

djkk16 said:
so you are using it on ext4 data ?
Click to expand...
Click to collapse
Yep..i tried f2fs a time ago with another rom but not seemed better..so i use ext4 with lagfix after a flash.

@Genie's
I'm using v7... Very smooth!
You are speak about a tips:
- use kernel dirty v but i have much reboot with it.
- what are L speed tweek? ?
Thank You so much.

f2fs problem
with f2fs on data and cache and dirtyV- not booting, waiting for a 20 min on MI logo ((( please help.