Hello,
how to create a semc emergency package for the z1c to unbrick a hardbricked phone by using s1 tool emergency mode? My phone is only detected as semc device (no flashmode, no fastboot, no recovery) and I miss a suitable emergency package (in a former thread it is available for z ultra and z1, but not for z1c). I wood be glad for help
http://forum.xda-developers.com/showthread.php?t=2682255
hardbrick repair
XperienceD said:
http://forum.xda-developers.com/showthread.php?t=2682255
Click to expand...
Click to collapse
Thanks for your thread.
But I spent hours now, to find a method to reanimate my phone. Still I didnt find a suitable semc package or sin_file_set to flash in s1tool.
In other thread I read a hint that maybe I destroyed my trim area. First of all I made a backup of trim area with backupTA program. The backup is a .zip file or .img file. Is there a possibility to restore my phone?
mar10777 said:
Thanks for your thread.
But I spent hours now, to find a method to reanimate my phone. Still I didnt find a suitable semc package or sin_file_set to flash in s1tool.
In other thread I read a hint that maybe I destroyed my trim area. First of all I made a backup of trim area with backupTA program. The backup is a .zip file or .img file. Is there a possibility to restore my phone?
Click to expand...
Click to collapse
Maybe there is some help, when I attach the log files of s1tool and the TA-backup
Which s1tool are you using? Have you tried the one from this post? http://forum.xda-developers.com/showpost.php?p=52139322&postcount=171
zxz0O0 said:
Which s1tool are you using? Have you tried the one from this post? http://forum.xda-developers.com/showpost.php?p=52139322&postcount=171
Click to expand...
Click to collapse
Yes, I tried thisone
mar10777 said:
Yes, I tried thisone
Click to expand...
Click to collapse
I want to give a big thankyou to the_laser, senior member.
He finally solved my hardbrick problem by creating a emergency file, which I could flash in s1tool. The phone is fully alive now!!
Excellent work!!! Most impressed me however his patience with me as quite Noob. Thank you.
Some guidance would be appreciated
mar10777 said:
I want to give a big thankyou to the_laser, senior member.
He finally solved my hardbrick problem by creating a emergency file, which I could flash in s1tool. The phone is fully alive now!!
Excellent work!!! Most impressed me however his patience with me as quite Noob. Thank you.
Click to expand...
Click to collapse
Hi there,
I believe I hard bricked my phone as well (screen stays black, phone vibrates once when keeping the power button pressed, cant get into recovery, volume down button pressed connecting via USB shows green red light flash).
However when connecting to the S1 tool Emma from Sony it detects the phone (see below screen shot) and says the bootloader wasn't unlocked. I am pretty sure I have done this. (It is my first attempt to install a custom ROM).
The S1tool in the description below seems not to recognize the device.
After ploughing through some threads and reading about opening the device looking for test points I thought your thread here seems to be more fit for purpose.
I used EasyRootTool and LockedDualRecovery. I also created a back up file with Backup-TA before bricking it. I got this on my other machine and can attach this if needed tomorrow.
Some help and guidance would be very much appreciated.
lefu said:
Hi there,
I believe I hard bricked my phone as well (screen stays black, phone vibrates once when keeping the power button pressed, cant get into recovery, volume down button pressed connecting via USB shows green red light flash).
However when connecting to the S1 tool Emma from Sony it detects the phone (see below screen shot) and says the bootloader wasn't unlocked. I am pretty sure I have done this. (It is my first attempt to install a custom ROM).
The S1tool in the description below seems not to recognize the device.
After ploughing through some threads and reading about opening the device looking for test points I thought your thread here seems to be more fit for purpose.
I used EasyRootTool and LockedDualRecovery. I also created a back up file with Backup-TA before bricking it. I got this on my other machine and can attach this if needed tomorrow.
Some help and guidance would be very much appreciated.
Click to expand...
Click to collapse
Another point: in flashtool you can also unlock and lock the bootloader BLU button). (http://forum.xda-developers.com/showthread.php?t=2440597) (http://xperiafirmware.com/8-firmware/46-sony-xperia-z1-compact-d5503) (http://forum.xda-developers.com/showthread.php?t=2642081) (Type in phone *#*#7378423#*#* and go to Service Info => Configuration. If bootloader is unlocked it will say: "Bootloader unlocked: Yes". If it says something else like "Bootloader unlock allowed: Yes", it means the bootloader is locked.). So you can check, if your bootloader is really unlocked
lefu said:
Hi there,
I believe I hard bricked my phone as well (screen stays black, phone vibrates once when keeping the power button pressed, cant get into recovery, volume down button pressed connecting via USB shows green red light flash).
I dont believe, that your phone is ahrdbricked. It seems to be a soft brick: screen stays black, phone vibrates once when keeping the power button pressed, cant get into recovery, volume down button pressed connecting via USB shows green red light flash.
So, you can boot in flashmode. Use flashtool (latest version 9.18), its a powerful tool. (http://forum.xda-developers.com/showthread.php?t=2658952) (http://www.xperiablog.net/2014/09/0...allows-you-to-download-xperia-firmware-files/) (http://www.flashtool.net/downloads.php) If you have installed flashtool, change to the flashtool folder (C:\flashtool), then drivers, execute the .exe and choose the drivers (fastboot, flashmode and for phone model), then run flashtool. In the links above you can see how to use it. Just boot your phone in flashmode (volume down and usb connecting, run flashtool, click the flash button, choose flashmode and choose a stock rom (which you must download before and copy as .ftf file in the folder firmware in flashtool folder, or type the button device, checkdevice updates, choose your device and download a appropriate stock rom ), then reboot, root yout device again with easyroottool or newroot, reboot in recovery and flash a custom rom. I think it should be possible.
Click to expand...
Click to collapse
mar10777 said:
lefu said:
Hi there,
I believe I hard bricked my phone as well (screen stays black, phone vibrates once when keeping the power button pressed, cant get into recovery, volume down button pressed connecting via USB shows green red light flash).
I dont believe, that your phone is ahrdbricked. It seems to be a soft brick: screen stays black, phone vibrates once when keeping the power button pressed, cant get into recovery, volume down button pressed connecting via USB shows green red light flash.
So, you can boot in flashmode. Use flashtool (latest version 9.18), its a powerful tool. (http://forum.xda-developers.com/showthread.php?t=2658952) (http://www.xperiablog.net/2014/09/0...allows-you-to-download-xperia-firmware-files/) (http://www.flashtool.net/downloads.php) If you have installed flashtool, change to the flashtool folder (C:\flashtool), then drivers, execute the .exe and choose the drivers (fastboot, flashmode and for phone model), then run flashtool. In the links above you can see how to use it. Just boot your phone in flashmode (volume down and usb connecting, run flashtool, click the flash button, choose flashmode and choose a stock rom (which you must download before and copy as .ftf file in the folder firmware in flashtool folder, or type the button device, checkdevice updates, choose your device and download a appropriate stock rom ), then reboot, root yout device again with easyroottool or newroot, reboot in recovery and flash a custom rom. I think it should be possible.
Click to expand...
Click to collapse
Woowoop
That was as easy and pleasant as a stroll in the park.
Thanks a lot @mar10777
Click to expand...
Click to collapse
my devices is not booting into flashmode
Qhssub_bulk
Hi Everyone,
My Z1c hard bricked i thing. it is not response switch on, charging and etc.
When i plug it to pc via USB ı can see only QHSUSB_BULK on device manager list.
is it possible to repair it somehow or do ı have tı use as a BRICK anymore ?
Many thanks for help.
Gobizi said:
Qhssub_bulk
Hi Everyone,
My Z1c hard bricked i thing. it is not response switch on, charging and etc.
When i plug it to pc via USB ı can see only QHSUSB_BULK on device manager list.
is it possible to repair it somehow or do ı have tı use as a BRICK anymore ?
Many thanks for help.
Click to expand...
Click to collapse
Hi! Did you have any luck?
Related
So after my comedy of errors that was my playing around yesterday, I got my phone working again. Now I want to try again (and quit before the point that I broke it yesterday). However in fixing it I upgraded to 253 firmware, and I want to go back to 434. however I open up FlashTool get my ftf ready to flash, turn the phone off. Next step is volume down and plug in the USB cable, but instead of the light coming up green, it flashes green then immediately red (or possibly vice versa) then the light goes off, but FlashTool still thinks it's connected and in flash mode until I remove the cable. The battery has been a little bit drained through all of this. so I'm going to pump it up overnight and try again in the morning and hope that it just won't enter flash mode under X% battery, but if that's not the case has anyone ever run into this previously? or have any suggestions?
I have a locked bootloader, and it cannot be unlocked so fastboot options are out of the question. However it is worth noting that when I hold the volume up and plug in the USB cable, the blue light does stay on and I can gather info using FlashTool.
Villain of Brandon said:
So after my comedy of errors that was my playing around yesterday, I got my phone working again. Now I want to try again (and quit before the point that I broke it yesterday). However in fixing it I upgraded to 253 firmware, and I want to go back to 434. however I open up FlashTool get my ftf ready to flash, turn the phone off. Next step is volume down and plug in the USB cable, but instead of the light coming up green, it flashes green then immediately red (or possibly vice versa) then the light goes off, but FlashTool still thinks it's connected and in flash mode until I remove the cable. The battery has been a little bit drained through all of this. so I'm going to pump it up overnight and try again in the morning and hope that it just won't enter flash mode under X% battery, but if that's not the case has anyone ever run into this previously? or have any suggestions?
I have a locked bootloader, and it cannot be unlocked so fastboot options are out of the question. However it is worth noting that when I hold the volume up and plug in the USB cable, the blue light does stay on and I can gather info using FlashTool.
Click to expand...
Click to collapse
U want to flash 434 back right? So u need to enter flash mode which is volume up + connect to PC.
Sent from my BlackBerry 9900 using Tapatalk
Volume up does fastboot, volume down does flash mode. When I hold volume down the problem is the LED flashes Green, then immediately red then turns off and then will not continue flashing.
Villain of Brandon said:
Volume up does fastboot, volume down does flash mode. When I hold volume down the problem is the LED flashes Green, then immediately red then turns off and then will not continue flashing.
Click to expand...
Click to collapse
My bad, sorry. U flash using flashtool or pc companion? Have u try with latest version of flashtool beta6?
Sent from my BlackBerry 9900 using Tapatalk
I was downloading the windows version before I called it a night, because the ubuntu one is giving me a funny error I didn't feel like throubleshooting at 4am. that seems to have it fixed the problem though
Same problem
Villain of Brandon said:
I was downloading the windows version before I called it a night, because the ubuntu one is giving me a funny error I didn't feel like throubleshooting at 4am. that seems to have it fixed the problem though
Click to expand...
Click to collapse
Can you tell me how did you solve the problem? Because right now I'm having the sam thing on my ZL... I'm trying it with the newst flashtool, the light is green and turns into red and nothing happens...
Do a hard reset on it (using the button on the back), don't turn it on and follow the Flashtools flashing process
1.- Open Flashtools
2.- Flash mode > Flashmode > Select the FTF you just downloaded (The one of 700+MB) > Flash
3.- Connect your Phone in Flash mode (It will start flashing).
4.- Boot your phone and you're ready to go.
When selecting the FTF just select it and leave everything as it is and make sure that you have installed the drivers for flashing (
They are where found you installed Flashtools
In a folder called Drivers, open the .exe and Install these:
- Fastboot drivers
- Flashmode drivers
- Xperia Z and SO-02E drivers
If stills doesn't works I can't help any far as that, but I would suggest you that If you are able try to flash it on another computer (It might sound silly but It could actually work ), also make sure that you're running the latest Flashtool which is v0.9.11.0 and can be found here: http://androxyde.github.io/
That is quiet normal, green appears...red or whatever....out, flashmode connected, look into flashtool.....fine, no light on the phone....flash, but have an eye into flashtool after 1 or 2 minutes if you don't start flashing your phone disconnects automatically...and will stay on charging only.
nukharma said:
That is quiet normal, green appears...red or whatever....out, flashmode connected, look into flashtool.....fine, no light on the phone....flash, but have an eye into flashtool after 1 or 2 minutes if you don't start flashing your phone disconnects automatically...and will stay on charging only.
Click to expand...
Click to collapse
It would be fine, but tha flashtool displays some kind of instructions when it asks you to connect your phone in flashmode, and I connect it holding down the volume down key + connect AND then that instructions window should close automatically BUT that is just not happening. I've tried it 30 times already, all the drivers on, flashtool recognizes my phone when i start it... It is just not getting in flashmode! Is there any other way to flash the phone without flashmode??? I can get in fastboot I think, because if I press the volume up key while connecting the blue led is on, so it works.
I'm ready to donate for someone who can help me to get this phone work!
phone software version: 1266-7597_10.1.A.0.287 GENERIC - userdebug
File System Version: Global-LTE_10.1.A.0.278
S1 boot version: 1264-2309 S1_Boot_APQ_8064_LA1.2_9
ETS Software version: 1269-3849_5
SIM lock: here is everything 0 and no [X]
This is what I have right now in my phone. And one more thing that I was searching for and gugled it and cant find answer
ROOTING STATUS: unknown If I'm right there should be a text like Bootloader unlock allowed:Yes or No... not unknown
Anyway thx for your reply!
what version of Flashtool are you using? If it is the newest from the Androxyde's site, that wouldn't work for me either, you need to use the beta release. There should be a link above to the thread where they update the beta releases.
faragorn said:
It would be fine, but tha flashtool displays some kind of instructions when it asks you to connect your phone in flashmode, and I connect it holding down the volume down key + connect AND then that instructions window should close automatically BUT that is just not happening. I've tried it 30 times already, all the drivers on, flashtool recognizes my phone when i start it... It is just not getting in flashmode! Is there any other way to flash the phone without flashmode??? I can get in fastboot I think, because if I press the volume up key while connecting the blue led is on, so it works.
I'm ready to donate for someone who can help me to get this phone work!
phone software version: 1266-7597_10.1.A.0.287 GENERIC - userdebug
File System Version: Global-LTE_10.1.A.0.278
S1 boot version: 1264-2309 S1_Boot_APQ_8064_LA1.2_9
ETS Software version: 1269-3849_5
SIM lock: here is everything 0 and no [X]
This is what I have right now in my phone. And one more thing that I was searching for and gugled it and cant find answer
ROOTING STATUS: unknown If I'm right there should be a text like Bootloader unlock allowed:Yes or No... not unknown
Anyway thx for your reply!
Click to expand...
Click to collapse
Ok guess there isn't a link so here's the thread where they update the beta releases http://forum.xda-developers.com/showthread.php?p=39416182
Help
Guys, is there a way you can quit Flash Mode? I got stuck on it. The thing is my internet connection is to slow so i cancelled the "Update Service" by sony process, but the Xperia Z (C6603) is still stuck on Flash Mode. Can't get it out of there. It won't charge...
Im hopeless. Pls help me.
faragorn said:
It would be fine, but tha flashtool displays some kind of instructions when it asks you to connect your phone in flashmode, and I connect it holding down the volume down key + connect AND then that instructions window should close automatically BUT that is just not happening. I've tried it 30 times already, all the drivers on, flashtool recognizes my phone when i start it... It is just not getting in flashmode! Is there any other way to flash the phone without flashmode??? I can get in fastboot I think, because if I press the volume up key while connecting the blue led is on, so it works.
I'm ready to donate for someone who can help me to get this phone work!
phone software version: 1266-7597_10.1.A.0.287 GENERIC - userdebug
File System Version: Global-LTE_10.1.A.0.278
S1 boot version: 1264-2309 S1_Boot_APQ_8064_LA1.2_9
ETS Software version: 1269-3849_5
SIM lock: here is everything 0 and no [X]
This is what I have right now in my phone. And one more thing that I was searching for and gugled it and cant find answer
ROOTING STATUS: unknown If I'm right there should be a text like Bootloader unlock allowed:Yes or No... not unknown
Anyway thx for your reply!
Click to expand...
Click to collapse
I have the same problem
I am on unlocked bootloader Xperia L i tried everyting but no help......drivers and all are fine
Just making sure you are doing it correctly you turn off the phone, hold the volume down Jerry and then connecting the usb cable?
Sorry for digging. I hope it helps other people.
You have problem with drivers. You need to turn off driver signature enforcement - search google for "testsigning on". Apply it in cmd, reboot pc. Then install flashtool drivers (fastboot and flashmode, then reboot for being sure) and then try to flash. Cheers
I have Sony M4 aqua fastboot mode is working but flash mode the light is green but flash tool cant recognise it nothing happens
WILLING TO DONATE for someone who can get this phone work!!!!!!!!!!!
I've just recieved an xperia ZL, i bought on the internet. The seller sold it as it is not working, it cant connect to any network, or its just not recognizing the sim, and the back cam is not working. The cam can start but when I take a pic with it and it tries to save it then I get an Error message without any error codes. I think the phone should be flashed, and I need help with it. Will it make the cam work? And can it help on the other problem with the sim card? I took some pics about the details of my phone, I dont understand anything from it but it can help for some of you
who is an expert, the only problem is that I cant link it in my post because I am new on this forum...
UPDATE
FLASHTOOL installed - YES
Flashtool recognize the phone when it is started - YES
When flashtool asks me to connect the phone in flashmode and it shows me the instructions I cant get it in flashmode.... The instructions dont disappear when I hold the volume down key and connect it to the usb, just red yellow green led flash for <1 second, and nothing happens... then I must restart the phone with the small button on the back of it.
So the thing is stuck here!!! I think my phone is not able to get in flashmode! Is there another method to flash it without using flashmode on phone???? And I think it can start in fastboot mode because if I hold the volume UP key and connect it to usb then the blue led is ON...
One more thing that I was searching for and gugled it and cant find answer
ROOTING STATUS: unknown If I'm right there should be a text like Bootloader unlock allowed:Yes or No... not unknown.
SOME SPECS:
Phone Software Version: 1266-7597_10.1.A.0.287 GENERIC - userdebug
File System Version: Global-LTE_10.1.A.0.278
S1 boot version: 1264-2309 S1_Boot_APQ_8064_LA1.2_9
ETS Software version: 1269-3849_5
SIM lock: here is everything 0 and no [X]
If you need some other info just ask me, an dtell me where to find it.
THX FOR YOUR TIME!!!
faragorn said:
I've just recieved an xperia ZL, i bought on the internet. The seller sold it as it is not working, it cant cannect to any network, or its just not recognizing the sim, and the back cam is not working. The cam can start but when I take a pic with it and it tries to sav it then I get an Error message without any error codes. I think the phone should be flashed, and I need help with it. Will it make the cam work? And can it help on the other problem with the sim card? I took some pics about the details of my phone, I dont understand anything from it but it can help for some of you
who is an expert, the only problem is that I cant link it in my post because I am new on this forum...
P.S.: I've tried to download the Flashtool for ZL V6 that I've found on this forum but all the links were dead, so if somebody can give me a link that is up, I would appreciate it. Thx
Click to expand...
Click to collapse
There you go:
Flashtool for Z/ZL
http://forum.xda-developers.com/showthread.php?t=2201189
Firmware
http://forum.xda-developers.com/showthread.php?t=2196718
Thx, but the links for the flashtool for windows are dead.
I've downloaded the C6503_10.1.A.1.350_Generic DE.ftf and flashtool 0.9.11 from the Androxyde website. Is that flash tool good for this ZL or is there a special just for the ZL phone? And do you think the flashing will solve my problems?
In my phone it says:
phone software version: 1266-7597_10.1.A.0.287 GENERIC - userdebug
File System Version: Global-LTE_10.1.A.0.278
S1 boot version: 1264-2309 S1_Boot_APQ_8064_LA1.2_9
ETS Software version: 1269-3849_5
SIM lock: here is everything 0 and no [X]
Updade:
Installed the latest flashtool, drivers too, but when I try to flash the phone I have to turn it off and then disconnect the micro usb, I'm holding the volume down key and connect back the usb, then I see a green led on the phone and after that a red one and nothing happens. What is the problem now?
And I would like to ask someone a favor who has ZL too, to look at the SIM card slot and see how much pins are there, in my there is 3 and it seems like the fourth on the left side is missing?!?
faragorn said:
Thx, but the links for the flashtool for windows are dead.
I've downloaded the C6503_10.1.A.1.350_Generic DE.ftf and flashtool 0.9.11 from the Androxyde website. Is that flash tool good for this ZL or is there a special just for the ZL phone? And do you think the flashing will solve my problems?
In my phone it says:
phone software version: 1266-7597_10.1.A.0.287 GENERIC - userdebug
File System Version: Global-LTE_10.1.A.0.278
S1 boot version: 1264-2309 S1_Boot_APQ_8064_LA1.2_9
ETS Software version: 1269-3849_5
SIM lock: here is everything 0 and no [X]
Updade:
Installed the latest flashtool, drivers too, but when I try to flash the phone I have to turn it off and then disconnect the micro usb, I'm holding the volume down key and connect back the usb, then I see a green led on the phone and after that a red one and nothing happens. What is the problem now?
And I would like to ask someone a favor who has ZL too, to look at the SIM card slot and see how much pins are there, in my there is 3 and it seems like the fourth on the left side is missing?!?
Click to expand...
Click to collapse
There must be something u r doing wrong.
For the Z/ZL u need this version : http://forum.xda-developers.com/showthread.php?t=2162907
Find it here also: http://androxyde.github.io/index.html?1371023098000
PC: Flashtool and Flashtool drivers installed, Android ADB drivers installed, Sony PC Companion installed.
XPERIA : Enable USB Debugging, Enable Install from Unknown Sources
Then, turn your phone off.
Start Flashtool, click on the thunder icon, select the file u want to flash, ok, wait for it to load, once the program asks for the phone connect the USB cable, then volume down, keep pressing it while u connect the phone to the usb...should work.
cesarleeds said:
There must be something u r doing wrong.
For the Z/ZL u need this version : http://forum.xda-developers.com/showthread.php?t=2162907
Find it here also: http://androxyde.github.io/index.html?1371023098000
PC: Flashtool and Flashtool drivers installed, Android ADB drivers installed, Sony PC Companion installed.
XPERIA : Enable USB Debugging, Enable Install from Unknown Sources
Then, turn your phone off.
Start Flashtool, click on the thunder icon, select the file u want to flash, ok, wait for it to load, once the program asks for the phone connect the USB cable, then volume down, keep pressing it while u connect the phone to the usb...should work.
Click to expand...
Click to collapse
Thak you for your reply... Iam ready to donate for someone who can get this phone work for me!!!!!
I've tried exactly as you said. Everything is installed and the flashtool is that version and it recognize my phone, and when i start the flash and the flashtool shows me the instructions to connect my phone in flashmode, there is the point where I'm stuck. I've noticed that I simply cant get the phone in flashmode. I'm holding the volume down key while I connect the usb in it, then the red yellow green leds flahses for <1 seconds and nothing happens. I'm sure that the phone is unable to get in flashmode. Now I think I need another flashing method where flashmode is not required, if it is possible....
Anyway thank you for your time and reply!!
have you tried to check on sony service ? just make sure that is not hardware broken.
There are several method other than using flashtool.
1. Try repair feature in PC companion
2. If cannot update try download SUS (Google this)
3. Or if u can enter fastboot, u can try to flash the kernel via flashtool. Open flashtool, then go to fastboot mode, then unplug cable, Off phone, enter fastboot mode, in flashtool select flash kernel, select .img file (extract from kernel u download, ensure it has recovery I.e doomkernel) then flash. This will only work if ur bootloader unlocked already + rooted.
4. Try to root u phone 1st then unlocked bootloader. (please backup ur TA partition, otherwise u will loss ur DRM key or in other word loss ur bravia engine feature, custom Rom have this feature already actually, unless u want to go back to completely stock Rom)
5. Or download older version of flashtool. Ur version of Rom .278 seem very rare, never heard of it. Maybe the first Rom version before .350.
Sent from my C6506 using Tapatalk 4 Beta
Yes for that you'll need root with cwm installed. So that you can flash using any zip..
Sent from my C6502 using xda app-developers app
Use SUS to repair ur phone...if still getting the problem let me know...I've found a workaround the SIM error
Sent from my C6502 using Tapatalk 2
faragorn said:
Thak you for your reply... Iam ready to donate for someone who can get this phone work for me!!!!!
I've tried exactly as you said. Everything is installed and the flashtool is that version and it recognize my phone, and when i start the flash and the flashtool shows me the instructions to connect my phone in flashmode, there is the point where I'm stuck. I've noticed that I simply cant get the phone in flashmode. I'm holding the volume down key while I connect the usb in it, then the red yellow green leds flahses for <1 seconds and nothing happens. I'm sure that the phone is unable to get in flashmode. Now I think I need another flashing method where flashmode is not required, if it is possible....
Anyway thank you for your time and reply!!
Click to expand...
Click to collapse
My Z had same problem it turn red yellow and then green and nothing, I solved it by installing flashtool BETA 4 and worked fine ..
Tiny off botton
Press the off botton at the back until its vibrates 3 times then hold volume key and connect to your computer, your phone now in flashmode. hope it helps!
Hello,
I have accidently hard bricked my xperia play.
After i soft bricked it due to flashing a wrong rom i managed to fix it again but then the phone couldnt detect my sdcard.
So i tried to install a new rom again what then failed badly.
I tried to flash it with flashtools but it failed because i forgot to activate debugging so i just plugged my phone out and tried to start it but it somehow didnt work....
Now my computer only does a sound when i plug it in and flashtool nor my computer can detect my phone.
There neither is a led blinkin..
Is there anything i can do?
07boss said:
Hello,
I have accidently hard bricked my xperia play.
After i soft bricked it due to flashing a wrong rom i managed to fix it again but then the phone couldnt detect my sdcard.
So i tried to install a new rom again what then failed badly.
I tried to flash it with flashtools but it failed because i forgot to activate debugging so i just plugged my phone out and tried to start it but it somehow didnt work....
Now my computer only does a sound when i plug it in and flashtool nor my computer can detect my phone.
There neither is a led blinkin..
Is there anything i can do?
Click to expand...
Click to collapse
Can you enter flashmode? (back key while connecting to pc) or fastboot by holding search button while connecting to pc
Sent from my C6603 using xda app-developers app
Jure220 said:
Can you enter flashmode? (back key while connecting to pc) or fastboot by holding search button while connecting to pc
Sent from my C6603 using xda app-developers
app
Click to expand...
Click to collapse
No , cant do neither...
So nuch ****in bad luck today...
Did you flashed wrong rom (from recovery) or wrong firmware (from flashtool) ?
Bakisha said:
Did you flashed wrong rom (from recovery) or wrong firmware (from flashtool) ?
Click to expand...
Click to collapse
well i first flashed the wrong rom and had a soft brick
after that, i fixed it by flashing the stock rom
then, i again tried to flash a firmware with flashtools because my phone couldnt detect the sd-card and cwm somehow didnt work anymore.
while trying to flash the firmware i had to unplug my phone while flashing because i didnt activate debuggin, the flashing had already started tho.
07boss said:
well i first flashed the wrong rom and had a soft brick
after that, i fixed it by flashing the stock rom
then, i again tried to flash a firmware with flashtools because my phone couldnt detect the sd-card and cwm somehow didnt work anymore.
while trying to flash the firmware i had to unplug my phone while flashing because i didnt activate debuggin, the flashing had already started tho.
Click to expand...
Click to collapse
Start flashtool.
Power off phone
press and hold back button.
While still keeping pressed back button, plugin usb to phone
What is report from flashtool?
Bakisha said:
Start flashtool.
Power off phone
press and hold back button.
While still keeping pressed back button, plugin usb to phone
What is report from flashtool?
Click to expand...
Click to collapse
it doesnt say anything, like my phone was never connected...
07boss said:
it doesnt say anything, like my phone was never connected...
Click to expand...
Click to collapse
is it same for fastboot mode ? (power off, hold search and plug in usb)
Try other usb port, or maybe different cable
reinstall drivers from flashtool folders
right-click on "my computer" , click "manage", click "device manager". Is there any item with yelow mark, someting called "adb" or "semcusb"?
What is your model? i,a,at or x? locked or unlocked bootloader?
Wich stock firmware did you tried to flash previously? .79?
hi
07boss said:
Hello,
I have accidently hard bricked my xperia play.
After i soft bricked it due to flashing a wrong rom i managed to fix it again but then the phone couldnt detect my sdcard.
So i tried to install a new rom again what then failed badly.
I tried to flash it with flashtools but it failed because i forgot to activate debugging so i just plugged my phone out and tried to start it but it somehow didnt work....
Now my computer only does a sound when i plug it in and flashtool nor my computer can detect my phone.
There neither is a led blinkin..
Is there anything i can do?
Click to expand...
Click to collapse
check if it is detected in pc with testpoints then i can fix it contact me on gtalk [email protected]
Bakisha said:
is it same for fastboot mode ? (power off, hold search and plug in usb)
Try other usb port, or maybe different cable
reinstall drivers from flashtool folders
right-click on "my computer" , click "manage", click "device manager". Is there any item with yelow mark, someting called "adb" or "semcusb"?
What is your model? i,a,at or x? locked or unlocked bootloader?
Wich stock firmware did you tried to flash previously? .79?
Click to expand...
Click to collapse
Tried all the ports and cables i got nothing worked.
Reinstalled Flashtool but didnt work neither.
No adc or semcusb found
I have a r800i with locked bootloader
And i flashed R800i_4.0.A.2.368_World this firmware previously.
kks111 said:
check if it is detected in pc with testpoints then i can fix it contact me on gtalk [email protected]
Click to expand...
Click to collapse
hi,
im not sure if i did it right but it still didnt work
I did it like shown here http://i2.minus.com/i9RmZrmhz0sq4.jpg so I connected the pointed end to the TP and the other end of the cable with the micro-usb.
Oh shoot,
i just realized that i didnt erase the old cache and date when i tried to install the new rom after i installed the stock rom because i couldnt enter cwm.
So is there anything I can do?
07boss said:
So is there anything I can do?
Click to expand...
Click to collapse
Try PC Companion.
Or try to enter in flash mode from different computer
Basicly, all you need is to enter flash mode and flash stock ftf with flashtool.
Why you can't enter flash mode, i am unable to understand...
Bakisha said:
Try PC Companion.
Or try to enter in flash mode from different computer
Basicly, all you need is to enter flash mode and flash stock ftf with flashtool.
Why you can't enter flash mode, i am unable to understand...
Click to expand...
Click to collapse
Well i already tried Pc COmpanion like a houndred times even while i had TP connected...
I cant understand the problem with the flash mode neither...
Its like my phone is "dead" it just doesnt respond to anything...
07boss said:
Well i already tried Pc COmpanion like a houndred times even while i had TP connected...
I cant understand the problem with the flash mode neither...
Its like my phone is "dead" it just doesnt respond to anything...
Click to expand...
Click to collapse
when you plug in phone, do you hear any sounds from windows? (that sound when you plug/unplug any usb device.)
Bakisha said:
when you plug in phone, do you hear any sounds from windows? (that sound when you plug/unplug any usb device.)
Click to expand...
Click to collapse
yea i hear a sound but nothing else.
07boss said:
yea i hear a sound but nothing else.
Click to expand...
Click to collapse
reinstall drivers from flashtool folder (most probably it's in c:\Program Files (x86)\Flashtool\drivers\ )
Connect your Play in flash mode (power off, hold back and plug in usb)
Look in device manager for anything with name sony, sony erricson, semc, adb, r800... Expand all items if you have too. Screenshot would help also
Check in other mods too (normal and fastboot mode)
Bakisha said:
reinstall drivers from flashtool folder (most probably it's in c:\Program Files (x86)\Flashtool\drivers\ )
Connect your Play in flash mode (power off, hold back and plug in usb)
Look in device manager for anything with name sony, sony erricson, semc, adb, r800... Expand all items if you have too. Screenshot would help also
Check in other mods too (normal and fastboot mode)
Click to expand...
Click to collapse
Hi,
btw thanks for all your help :good:
I actually find something in the device manager its called "ZEUS flash device".
Nice now when I press the search button it installs the ZEUS drivers.
Ill screenshot it.
Flashtool still cant find anything.
http://www.directupload.net/file/d/3515/9rzqw5vb_png.htm Device manager
http://www.directupload.net/file/d/3515/4h8vbs3z_png.htm ZEUS flash device
Its all german but I thing its not too hard to understand.
hey everyone
i have a problem with my z1c
i have unlocked the bootloader and changed the rom to cm11
but now i want to back to the stock rom
so i need to boot my device in flash mode but i can't
usb debugging is on and i press the volume down when plug in the usb
but its LED turn green for a moment and then turn off
what should i do?!
semolation said:
what should i do?!
Click to expand...
Click to collapse
Connect when the flashtool tells you to.
XperienceD said:
Connect when the flashtool tells you to.
Click to expand...
Click to collapse
i tried it too
didn't work
semolation said:
i tried it too
didn't work
Click to expand...
Click to collapse
If the led turns green for a second flashmode works, so you're doing something wrong.
Have you turned off the phone before?
USB debugging is irrelevant for entering flash mode.
Could also be a matter of drivers not installed? There are flashmode-specific drivers. There is a folder in Flashtool's folder called "drivers". You can install from there. Choose the Flashmode driver from the list, and also (maybe optional) the one from the list that is for your phone. The fastboot one wouldn't hurt either.
If you are running Windows 8, it may refuse to install these drivers. You can get around that easily... more info about it in this thread: http://forum.xda-developers.com/showthread.php?t=2378530
You probably already know this but I just want to mention it, for the sake of covering all bases..
the screen doesn't turn on when your in flashmode, it stays black.
The led should stay on but the screen doesn't.
I have the very same problem. Nothing helps. I have tried win7, 8 with no luck. bypassed the problem by creating own flashable zips
Hello,
I think I bricked my phone
I wanted to upgrade from 4.4.2 to Lollipop http://forum.xda-developers.com/sony-xperia-z1-compact/general/stock-14-6-1-236-customized-lollipop-5-t3264557
And before that I did a factory reset and format data (I got some issues on my phone and wanted to get rid of them).
Now I can not enter TWRP, I can not enter any thing. At the time beeing, after many restarts my red button is broken, I switch it off by "Power/Vol+". When I connect USB or push Power it starts and showing "SONY"-Logo, and that's it.
I can not enter flash-mode by swith off, hold Vol- and connect USB :crying:
What can I do to revive my Z1c?
Thanks for advices
BerWatch!
BerWatch said:
Hello,
I think I bricked my phone
I wanted to upgrade from 4.4.2 to Lollipop http://forum.xda-developers.com/sony-xperia-z1-compact/general/stock-14-6-1-236-customized-lollipop-5-t3264557
And before that I did a factory reset and format data (I got some issues on my phone and wanted to get rid of them).
Now I can not enter TWRP, I can not enter any thing. At the time beeing, after many restarts my red button is broken, I switch it off by "Power/Vol+". When I connect USB or push Power it starts and showing "SONY"-Logo, and that's it.
I can not enter flash-mode by swith off, hold Vol- and connect USB :crying:
What can I do to revive my Z1c?
Thanks for advices
BerWatch!
Click to expand...
Click to collapse
Do you have adb / fastboot on your computer?
levone1 said:
Do you have adb / fastboot on your computer?
Click to expand...
Click to collapse
Yes, I have, but can not enter my phone/don't know how to enter.
I tried switch off (by Power and Vol+), holding Vol- (the same with Vol+) and plug in USB - it starts by showing red light for 2 sec than "SONY", and than stps - no vibration, no light, only steady "SONY"
cmd shows: D:\Programme\Android-Tools\ADB>adb reboot recovery
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
error: device not found
D:\Programme\Android-Tools\ADB>adb reboot recovery
error: device not found
D:\Programme\Android-Tools\ADB>adb reboot bootloader
error: device not found
Phhu, hopefully I do something wrong?!
Install these:
http://developer.sonymobile.com/downloads/drivers/xperia-z1-compact-driver/
and try again
BerWatch said:
Yes, I have, but can not enter my phone/don't know how to enter.
I tried switch off (by Power and Vol+), holding Vol- (the same with Vol+) and plug in USB - it starts by showing red light for 2 sec than "SONY", and than stps - no vibration, no light, only steady "SONY"
cmd shows: D:\Programme\Android-Tools\ADB>adb reboot recovery
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
error: device not found
D:\Programme\Android-Tools\ADB>adb reboot recovery
error: device not found
D:\Programme\Android-Tools\ADB>adb reboot bootloader
error: device not found
Phhu, hopefully I do something wrong?!
Click to expand...
Click to collapse
Power off by holding power and volume up, just wait until it turns off. When it's totally shut off, just hold volume up while plugging in cable and don't let go of volume until you see blue led. Then you're in fastboot mode. If you have drivers installed, it's very easy to get into recovery from there. Report back.
If everything fails...
Install Flashtool on your PC, install the necessary drivers (flashtool helps you with that), download the current firmware in .ftf format and apply it with Flashtool to your phone.
No worries, we all were at your point sometime but you can always recover
Thanks for your hints, folks!
I'll try them tomorrow and give feedback than.
Happened to me once.. Accidentally wiped my data..
Only thing I managed to do is reinstall kk via flashtool
Xperia Z1 Compact .386 rooted
...nothing works.
I have almost everything installed: adb.exe (800kb from 25.07.2013), fastboot.exe (157kb from 25.07.2013), Flashtool (Version 0.9.14.0 built on 12-02-2014 22:45:00), Xperia Companion (Vers. 1.1.24.0), Z1 Compact drivers (device manager says: Sony sa0109 ADB Interface Driver Vers. 2.0.10.30018 from 13.05.2013).
Nothing can connect my Win10-PC via USB3.0 to my phone, it always starts (when I connect it to USB by holding wether Vol+ or Vol-) with red (...pink?) light for about 4sec, followed by showing "SONY" - end of anything.
I'm desperate :crying:
Do you get the green led light when connected in flash mode (vol down when connecting)?
Xperia Z1 Compact LP .386 rooted
No, only red light, than "SONY" without any vibration...
May it be, that usb-debugging was off, whenn I did format data?
BerWatch said:
No, only red light, than "SONY" without any vibration...
May it be, that usb-debugging was off, whenn I did format data?
Click to expand...
Click to collapse
I don't think it's related..
Maybe you don't have the right drivers on pc?
Xperia Z1 Compact LP .386 rooted
The fastboot or flashmode mode should always work - regardless of what you did regarding ROMs or setting or wipe etc.
It is there to save your phone if you messed up.
It is strange that you cant enter these modes. Normally its really a driver issue and you PC does not recognize your phone.
But it seems that you have tried installing them already.
Just to make sure... Your phone charges normally when you plug it in right? So it cant be a broken cable or broken micro-USB connection on your phone?
Also make sure your phone is really shut down - try resetting it with the red button next to your SIM-card slot.
Your volume buttons were fine before right?
Schlengge said:
The fastboot or flashmode mode should always work - regardless of what you did regarding ROMs or setting or wipe etc.
It is there to save your phone if you messed up.
It is strange that you cant enter these modes. Normally its really a driver issue and you PC does not recognize your phone.
But it seems that you have tried installing them already.
Just to make sure... Your phone charges normally when you plug it in right? So it cant be a broken cable or broken micro-USB connection on your phone?
Also make sure your phone is really shut down - try resetting it with the red button next to your SIM-card slot.
Your volume buttons were fine before right?
Click to expand...
Click to collapse
BINGO!!! ...the usb-cable, it's a pretty new one, but I know, the Z1c doesn't like every cable
Now I can enter Flashtools flash and fastboot mode.
I think I lost almost everything on my Z1c, even my TWRP, don't I?
What is now for noobs like me the best way to install this? http://forum.xda-developers.com/sony-xperia-z1-compact/general/stock-14-6-1-236-customized-lollipop-5-t3264557
Many Thanks!
Flash kitkat, root with pc, install twrp recovery, and flash lp rom from recovery
Xperia Z1 Compact LP .386 rooted
Oreltub said:
Flash kitkat, root with pc, install twrp recovery, and flash lp rom from recover/QUOTE]
...uuumpf, but thanks!
Does kiktkat mean 14.4.A.0.108 Android 4.4.4?
Click to expand...
Click to collapse
Yes
Xperia Z1 Compact LP .386 rooted
Thank you all for your input!
It was the usb-cable which did load my Z1c and in this case (no other data on the phone) light the purple LED and display the "SONY"-logo - but nothing else!
All the future problems are more on the software-side (my head) than on the hardware (the cable)...
Haha glad you sorted it out. I don't know why but I also have USB cables in my collection that just won't work with my Z1C... But now you know
If you need further help in restoring with flashtool you can also look up this thread for some helpful links : http://forum.xda-developers.com/showthread.php?t=2631291
Try to get your hands on a .108 firmware (I always keep one on my PC in case I f*** up ). They are easy to root with EasyRoot and from there you can flash dualrecovery. With TWRP you are good to access your backups or flash anything you want again.
Sent from my D5503 using XDA-Developers mobile app
Schlengge said:
Haha glad you sorted it out. I don't know why but I also have USB cables in my collection that just won't work with my Z1C... But now you know
If you need further help in restoring with flashtool you can also look up this thread for some helpful links : http://forum.xda-developers.com/showthread.php?t=2631291
Try to get your hands on a .108 firmware (I always keep one on my PC in case I f*** up ). They are easy to root with EasyRoot and from there you can flash dualrecovery. With TWRP you are good to access your backups or flash anything you want again.
Sent from my D5503 using XDA-Developers mobile app
Click to expand...
Click to collapse
Thanks - I'll give a feedback when i'm through!