Note 4 with "Ok Google" While Screen is off - Moto X Feature - AT&T Samsung Galaxy Note 4

No root, no need to download or install anything.
This work for other devices as well as the Note 4. This enables the Google now "Ok Google" Feature where you can active Google now while the screen is off. This is something like the Moto X feature.
How To:
1) Open Google Now
2) Go to Google Now Settings
3) Click on "Voice"
4) Enable "Audio History"
5) Click "Ok Google Detection"
6)Click "Always on" and follow the remaining directions.
You Can also watch this How To Video if you want:
If you device is unsupported or it just wont work, then there is an app called "Open Mic+ for Google Now" which does this for you.
This also works on the Lg G3, Nexus 5, and Galaxy S5, from what I know. Please feel free to try other devices and let me know if they work as well.

For anyone who wanted to know, this dose not kill the better. It doesn't even show and you wouldn't notice it was on until you said "Ok Google"

blackout720 said:
For anyone who wanted to know, this dose not kill the better. It doesn't even show and you wouldn't notice it was on until you said "Ok Google"
Click to expand...
Click to collapse
Can you have fingerprint unlock set up with this also?

robg2008 said:
Can you have fingerprint unlock set up with this also?
Click to expand...
Click to collapse
Yes, there is an option allow bypassing of locked screens in the same location as above directions.

Just got my phone. This works with fingerprint unlock. Thanks OP

robg2008 said:
Just got my phone. This works with fingerprint unlock. Thanks OP
Click to expand...
Click to collapse
Noticed any battery drain? I still have no issues.

blackout720 said:
Noticed any battery drain? I still have no issues.
Click to expand...
Click to collapse
Only had the phone for 8 hours too soon to tell if it's a major battery drain. However my understanding of the snapdragon 805 is it has some type of architecture built which always apps to run in a low power mode without draining much battery and Google now uses this feauture.

robg2008 said:
Only had the phone for 8 hours too soon to tell if it's a major battery drain. However my understanding of the snapdragon 805 is it has some type of architecture built which always apps to run in a low power mode without draining much battery and Google now uses this feauture.
Click to expand...
Click to collapse
The first day I had the phone I used it all day and had 2% battery life when I went to bed. Woke up about 6 hours later and though it has died. Nope still on 1%, so what you say could be true.

I have this enabled and can say that my battery life is great with it turned on.....of course this a completely subjective post. But I see nothing that indicates any type of additional strain on the battery. Playing a couple of hours of XCOM however...

Only works when SVoice is on
Something to note (no pun intended), when I have SVoice disabled, I don't have any setting "Always on", however when I reenable it("Turn it On") in the app manager I get the option.

pseudoSequential said:
Something to note (no pun intended), when I have SVoice disabled, I don't have any setting "Always on", however when I reenable it("Turn it On") in the app manager I get the option.
Click to expand...
Click to collapse
i didn't have S voice enabled when i got this working.

Here is my power usage over night not plugged in with nothing else to compete with the voice activation. Although my battery life is still pretty good, considering the circumstance, this is definitely eating away at it.

Found that when you don't use the feature for a period of time it turns off. Not completely off but, i found that I would have to go into the google now then exit for it to work again. Anyone else find to have this problem as well?

Thread title is wrong, no? Doesn't work with screen off while not charging like the Moto X does. Only works with screen on (on lock screen or unlocked), or when plugged in.

gtg465x said:
Thread title is wrong, no? Doesn't work with screen off while not charging like the Moto X does. Only works with screen on (on lock screen or unlocked), or when plugged in.
Click to expand...
Click to collapse
I have noticed the same exact thing. The phone 'OK Google' doesn't work with the screen off, only when I turn the screen on or plug it in for a charge. Not a big deal, but I was hoping it would work without a screen being on. Still fun to use that function, it makes me feel like I'm in the 'OK Google' commercial

blackout720 said:
Found that when you don't use the feature for a period of time it turns off. Not completely off but, i found that I would have to go into the google now then exit for it to work again. Anyone else find to have this problem as well?
Click to expand...
Click to collapse
what he said ^^^
it might be every reboot not sure. will have to test more.

dejected1 said:
what he said ^^^
it might be every reboot not sure. will have to test more.
Click to expand...
Click to collapse
Don't think every reboot. I did one today and I used the command and it still worked.

gtg465x said:
Thread title is wrong, no? Doesn't work with screen off while not charging like the Moto X does. Only works with screen on (on lock screen or unlocked), or when plugged in.
Click to expand...
Click to collapse
Not true. It works for me when not charging, with the screen off, and with the device locked (fingerprint).
Michael

Tinmania said:
Not true. It works for me when not charging, with the screen off, and with the device locked (fingerprint).
Michael
Click to expand...
Click to collapse
Same here, Screen off unplug or plug in.

Just got my lovely Note 4 today. I can confirm that "Ok Google" works for me with the phone unplugged, screen off, and lockscreen enabled.
I didn't follow the instructions in this thread. I was aware of how to activate the feature from prior experience. I'm not sure what step some of you all missed along the way to make this feature work.

Related

"Okay Google" only works after I tap the screen

For about a week after I got the watch, there were no issues with the voice commands but now whenever I try to use the "Okay Google" command when the screen is off it won't recognize it. I have to tap the screen to turn it on, then try the command once or twice before it picks it up. I have tried a factory reset on the watch and rebooting it but nothing seems to work. Has anyone else experienced this issue?
Same for me
Try this ,go to your phone,disconnect Google now and then reconnect it again an program the voice command
YOYO41 said:
Try this ,go to your phone,disconnect Google now and then reconnect it again an program the voice command
Click to expand...
Click to collapse
How exactly do I disconnect Google Now? I've looked through all the settings in both the Google Search app and the Android Wear app but I couldn't find anything
Open Google now ,the part where you see the cards,go to settings, and you will see at the top how to disable Google now,in lollipop is that way
YOYO41 said:
Open Google now ,the part where you see the cards,go to settings, and you will see at the top how to disable Google now,in lollipop is that way
Click to expand...
Click to collapse
I see, is there any way to accomplish this on KitKat?
kkg720 said:
For about a week after I got the watch, there were no issues with the voice commands but now whenever I try to use the "Okay Google" command when the screen is off it won't recognize it. I have to tap the screen to turn it on, then try the command once or twice before it picks it up. I have tried a factory reset on the watch and rebooting it but nothing seems to work. Has anyone else experienced this issue?
Click to expand...
Click to collapse
does the watch have an always on mic? i've never been able to get the voice response to work unless the display is active.
640k said:
does the watch have an always on mic? i've never been able to get the voice response to work unless the display is active.
Click to expand...
Click to collapse
I don't think it has. Honestly think its working as intended. Screen must be active before command.
Chris_c81 said:
I don't think it has. Honestly think its working as intended. Screen must be active before command.
Click to expand...
Click to collapse
agreed.
OP to answer your question for using the watch one-handed, the idea of being able to twist your wrist to activate the watch is helping your situation. for me, i know that this is not reliable, but this is how the watch/software was designed.
i'm hoping the moto 360.2 is more moto X like. always on mics and ambient display.
640k said:
agreed.
OP to answer your question for using the watch one-handed, the idea of being able to twist your wrist to activate the watch is helping your situation. for me, i know that this is not reliable, but this is how the watch/software was designed.
i'm hoping the moto 360.2 is more moto X like. always on mics and ambient display.
Click to expand...
Click to collapse
Got it, I thought it had an always on mic. Thanks for clearing that up for me!

"okay Google always on" turns itself back off, lollipop

I've tried it with s voice both on and off. when I first turn it on after a reboot, it doesn't train the voice model, but it says it's on but doesn't work. It then turns itself off, and trying to turn it on results in the voice model training opening , then saying it completed successfully, then turning its self back off.
Help?
No one else has experienced this?
To shut it off...i think thats what u looking for?
Go to Google. .sertings...voice, then turn off voice detection
Sent from my SM-N910P using Tapatalk
same thing on mine, its grayed out and I've heard there is no fix for it yet.
Bloodgroup said:
same thing on mine, its grayed out and I've heard there is no fix for it yet.
Click to expand...
Click to collapse
Mine looks gray to me..but it still slides to shut off.
Mine too. Is anyone on stock kernel?
Gotta disable S voice
fatboypup said:
Gotta disable S voice
Click to expand...
Click to collapse
I disabled it. Works now thanks
ibcenu said:
To shut it off...i think thats what u looking for?
Go to Google. .sertings...voice, then turn off voice detection
Sent from my SM-N910P using Tapatalk
Click to expand...
Click to collapse
I'm trying to turn it on, but it turns it's self back off with no explanation. physically moves the slider back to the off position before my eyes. It's gone back to just being grey now, though
fatboypup said:
Gotta disable S voice
Click to expand...
Click to collapse
If you read the original post, it says I've tried with s voice and without
This really isn't unique to Lollipop, as it does this exact thing on mine which is still on kitkat. Sometimes I will hear the tone acknowledging the ok google, but will immediately hear another tone. Often the screen doesn't even turn on. Even more often it just never works, although it works pretty perfectly with the screen on.
It has nothing to do with disabling svoice, although it probably is related to Samsung's implementation of svoice. Once in a while, thE phone will fail to even acknowledge an ok google request, only to sometime later say, "if you're trying to say something I didn't get that." This seems to imply the microphone is locked in the listen position, but isn't working.

No lockscreen on Bluetooth

Hi, I have something puzzling me and I think the community will be able to help me. I've been on CyanogenMod for the longest time before buying my N5X and one of the features I miss the most is the profiles settings.
My problem is I want to disable my lockscreen automatically when connected to my car Bluetooth. To be clear, I want it gone completely, not just the security, as in when I press the power button I go straight to Play Music. I have Trigger installed but can't seem to find a way to do this. I'm also willing to buy Tasker if I'm sure it will allow me to do it.
I'm rooted and running Cataclysm ROM if it helps.
Delete your car Bluetooth and re-connect it. It should prompt you to set up a Trusted Devoice. This will disable the lockscreen while connected to this device.
k.s.deviate said:
Delete your car Bluetooth and re-connect it. It should prompt you to set up a Trusted Devoice. This will disable the lockscreen while connected to this device.
Click to expand...
Click to collapse
Thank you for trying to help me, but I think you didn't read my post completely. I know about trusted devices, I use it. I want my lockscreen completely gone, so I don't have to swipe up to get inside Play Music.
I use fingerprint scanner and it goes straight to home screen.
Skorp_X said:
Thank you for trying to help me, but I think you didn't read my post completely. I know about trusted devices, I use it. I want my lockscreen completely gone, so I don't have to swipe up to get inside Play Music.
Click to expand...
Click to collapse
Settings - security - screen lock - select none. Or like the post above said, use fingerprint.
k.s.deviate said:
Settings - security - screen lock - select none. Or like the post above said, use fingerprint.
Click to expand...
Click to collapse
Now I'm starting to think you're just trolling. First suggestion is far from automatic, second one is not an option, the phone is in a car mount.
Again, I'm looking for a software way to do it.
Skorp_X said:
Now I'm starting to think you're just trolling. First suggestion is far from automatic, second one is not an option, the phone is in a car mount.
Again, I'm looking for a software way to do it.
Click to expand...
Click to collapse
Then leave screen on for the maximum time, so you won't have to deal with lock screens, until there is an app that would do it for you.
Skorp_X said:
Now I'm starting to think you're just trolling. First suggestion is far from automatic, second one is not an option, the phone is in a car mount.
Again, I'm looking for a software way to do it.
Click to expand...
Click to collapse
Not trolling, it would do exactly what you asked, lock screen completely gone not having to swipe up. You never mentioned it was in a mount, are you charging it at all in this mount? If so, use the keep awake option in developer settings.
k.s.deviate said:
Not trolling, it would do exactly what you asked, lock screen completely gone not having to swipe up. You never mentioned it was in a mount, are you charging it at all in this mount? If so, use the keep awake option in developer settings.
Click to expand...
Click to collapse
Maybe you're not trolling, but you're ignoring parts of my posts to find a half-assed way to make it work. I guess you missed the "automatically" part.
And no, not charging. I don't stare at my phone for 8 hours a day so I don't need to charge while driving. And please, if you're not gonna help don't post.
Skorp_X said:
Maybe you're not trolling, but you're ignoring parts of my posts to find a half-assed way to make it work. I guess you missed the "automatically" part.
And no, not charging. I don't stare at my phone for 8 hours a day so I don't need to charge while driving. And please, if you're not gonna help don't post.
Click to expand...
Click to collapse
Wow. OK, sorry for giving suggestions that could have potentially helped you until you found a way to use tasker in your favor.

Notification LED simulation App

I stumbled on Reddit at this cool App that simulates a Notification LED using the actual screen. It was also featured on XDA and I decided to give it a try on the Mi9T. The App is called NotifyBuddy and is available for free on the Play Store.
My experience with it over a whole day was great. It actually looks like an LED lighting up. Since we have a Amoled screen it just uses a tiny part of the screen, so there is no huge battery drain. Also to prevent burn in it moves slightly in position every 5 to 10 minutes or so from left to right. You can have different colors for different Apps and how long the LED effect will be active until switching off. I have mine on for 5 minutes.
My major concern was battery life since when the App is active the phone probably doesn't go to deep sleep but after now 24 hours of the phone being unplugged I can say it's great. Just look at the Screenshots. I'm at 50% right now and almost 4,5 hours of SOT over 24 hours of usage. It works very well so far and if this doesn't get worse there is no reason to not keep it. Try it out guys if you are missing a Notification LED on the actual front of the phone.
App link:
https://play.google.com/store/apps/details?id=com.xander.android.notifybuddy
Doesn't work for me, do you use your fingerprint scanner to unlock because I suspect it might be conflicting with that. None of those similar apps ever work for me
Doesn't work for me also, there its no way to make it work
Weird. It works for me
Doesn't work for me. I use fingerprint scanner. Wish it did work though, as this would be really helpful.
I had to reboot the phone to have the app working
perdu79 said:
I had to reboot the phone to have the app working
Click to expand...
Click to collapse
Tried that and still nothing. How strange!
tristan1990 said:
Tried that and still nothing. How strange!
Click to expand...
Click to collapse
I guess you granted the app the required permissions ( asked when you first launch it) and allow notifybuddy to start in backgroup, display on lock screen ?
I'm running MUI global 10.3.10
Can anyone confirm who does have it working, that it works with fingerprint unlock?
perdu79 said:
I guess you granted the app the required permissions ( asked when you first launch it) and allow notifybuddy to start in backgroup, display on lock screen ?
I'm running MUI global 10.3.10
Click to expand...
Click to collapse
Where did you download the global 10.3.10?
svenerator said:
Can anyone confirm who does have it working, that it works with fingerprint unlock?
Click to expand...
Click to collapse
I advise you to try this:
1. Remove the fingerprint.
2. Run the application, when you first start, allow notifybuddy to run in the backgroup, display locks on the screen.
3. And then create a fingerprint.
4. Reboot the phone.
A
- I received the 10.3.10 by OTA... (you can manualy check for update into the "about phone" section)
- NotifyBuddy is working with Fingerprint unlock activated. The fingerprints where created before installing the app.
Tried deleting fingerprint before installing the app.
Then tried again after.
Could not make it work. If anyone has any more suggestions, they will be very much appreciated.
Using Global Stable 10.3.10.0
Doesnt work with AOD
this should be a feature in custom roms.
Doesn't work for me
svenerator said:
Can anyone confirm who does have it working, that it works with fingerprint unlock?
Click to expand...
Click to collapse
I got it working, but it does not work with the fingerprint unlock have to press the power button first and then use fingerprint
Prof Reminder. Use this app and forget about any other app that involves notification LED. I use this app since i received this Mi9T. I was upset for missing the usual notification Led and i have searched for other options. This app does not consume any battery and is very easy to set up. When you have missed notification (WhatsApp, sms, call, etc), this app reminds you over and over.... Sorry if it's off topic or something but i just try to help! Respect!
cuoresporttivo said:
Prof Reminder. Use this app and forget about any other app that involves notification LED. I use this app since i received this Mi9T. I was upset for missing the usual notification Led and i have searched for other options. This app does not consume any battery and is very easy to set up. When you have missed notification (WhatsApp, sms, call, etc), this app reminds you over and over.... Sorry if it's off topic or something but i just try to help! Respect!
Click to expand...
Click to collapse
Dude, you "saved my life"with this application.
I came from a OnePlus 3 and never had a Xiaomi phone before, and the lack of a visible LED was annoying me a lot.
I had it work for all of 5 mins and no matter what I try I cant get it to work.

Note 10 + charging status

Today i received my note 10+ and noticed weird feature/Bug. No matter what type of charging i use (wireless or Cable) there is a charging message/status of type of charging , capacity and remaining time at the bottom of the screen. I tried turn on/off AOD , screensaver , that message is still there and im lil bit afraid of burn in . Anyone noticed the same and am i worried with reason?How can i turn it off? Thx in advance
ViD0 said:
Today i received my note 10+ and noticed weird feature/Bug. No matter what type of charging i use (wireless or Cable) there is a charging message/status of type of charging , capacity and remaining time at the bottom of the screen. I tried turn on/off AOD , screensaver , that message is still there and im lil bit afraid of burn in . Anyone noticed the same and am i worried with reason?How can i turn it off? Thx in advance
Click to expand...
Click to collapse
Using holey light?
You mean like this?
This is normal. And this is from a note 9
Also there is no burn in from AOD because
AOD moves very little after a few secs so it doesnt stay in same position.
20degrees said:
Using holey light?
Click to expand...
Click to collapse
No. all stock
sunmybun said:
You mean like this?
This is normal. And this is from a note 9
Also there is no burn in from AOD because
AOD moves very little after a few secs so it doesnt stay in same position.
Click to expand...
Click to collapse
Yeah and no, like that but not on locked screen . When i turn off screen i see only that message at the bottom, nothing else, and AOD and screensaver is turned off. Is that some sort of forced AOD only when charging cause i would like to turn that off, dont need that status. Weird thing is that i didnt have that on S10e..
ViD0 said:
No. all stock
Yeah and no, like that but not on locked screen . When i turn off screen i see only that message at the bottom, nothing else, and AOD and screensaver is turned off. Is that some sort of forced AOD only when charging cause i would like to turn that off, dont need that status. Weird thing is that i didnt have that on S10e..
Click to expand...
Click to collapse
I have that on my Note 9. I thought it was normal. It's always been there.
Sent from my [device_name] using XDA-Developers Legacy app
sunmybun said:
You mean like this?
This is normal. And this is from a note 9
Also there is no burn in from AOD because
AOD moves very little after a few secs so it doesnt stay in same position.
Click to expand...
Click to collapse
sorry for going off-topic: what app are you using to show the LTE band in the lock screen?!
Ya its driving me nuts too, no idea how to turn it off. My note 9 does not do this.
Yes, omg, I need to turn this off too. Even if it does shift over a couple pixels it will cause burn-in in that general area. This is a no-no
duracool said:
I have that on my Note 9. I thought it was normal. It's always been there.
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
Not correct. With the Note 9, you can have AOD turn off after a certain time, when AOD turned off the entire screen went black. So for me, at 11pm my screen was solid black and by 7am my AOD was back on.
Kept me from having a mini light during the night. I am not a fan of this being forced on. Mostly due to the high possibility of screen burn in as it doesn't shift much.
I was able to do it! However it requires not having Always on display. Here's how it's done. I purchased package disabler pro which is about $3 for the app. I then disabled always on display entirely from the app. I figured just turning it off in the settings app wont do it since it's always running in the background. However disabling it with package disabler seemed to do the trick and now I no longer get the charging indicator while the screen is off.
You could have done it with disabling/uninstalling with ADB instead, and for free.
jazz995756 said:
I was able to do it! However it requires not having Always on display. Here's how it's done. I purchased package disabler pro which is about $3 for the app. I then disabled always on display entirely from the app. I figured just turning it off in the settings app wont do it since it's always running in the background. However disabling it with package disabler seemed to do the trick and now I no longer get the charging indicator while the screen is off.
Click to expand...
Click to collapse
Which package disabler pro app are you using? link?
Is there any more "normal" way to do that?
Maybe they'll fix that with future update, but that gonna be soon coz we will end up with burned screens.
koolboyztn said:
Which package disabler pro app are you using? link?
Click to expand...
Click to collapse
https://www.packagedisabler.com
jazz995756 said:
https://www.packagedisabler.com
Click to expand...
Click to collapse
Thanks man!
koolboyztn said:
Which package disabler pro app are you using? link?
Click to expand...
Click to collapse
I got the package disabler from here https://www.packagedisabler.com/ . It's kind of shady so I advise to use PayPal. You will need to enable the option to sideload applications, do a search for 'unknown sources' on the phone, should pop-up right away. Download the app from the site, search it with the file explorer and install it, you should also receive a code in your email after you pay, paste it. Scroll down until you see 'Always on Display' and select disable. This worked for me. The app is more than $3.00 as they charge in Euros. Hope this help :cyclops:
Nastrahl said:
You could have done it with disabling/uninstalling with ADB instead, and for free.
Click to expand...
Click to collapse
A small guide, please
/CK
ST-Cyclone921R said:
sorry for going off-topic: what app are you using to show the LTE band in the lock screen?!
Click to expand...
Click to collapse
Signalcheck pro
Nastrahl said:
You could have done it with disabling/uninstalling with ADB instead, and for free.
Click to expand...
Click to collapse
What's adb?
Nastrahl said:
You could have done it with disabling/uninstalling with ADB instead, and for free.
Click to expand...
Click to collapse
Don't even need ADB, can use "CCSWE App Manager" from the play store.
Sent from my SM-N976V using Tapatalk

Categories

Resources