I recently picked up a D851 (TMobile). I rooted it, but did not replace the ROM or install a custom bootloader.
Last weekend, the phone started randomly rebooting. Watching logcat via adb showed me several random apps throwing sig11s, after which the phone would give up and reboot. Cycle repeats.
This looks like a hardware issue, as the apps that crash change on each boot cycle.
I arranged with TMobile to swap the device, but they cautioned me that the phone must be returned to an unrooted state.
I've had a hell of a time with it from here. My first try was to install the LG drivers and the PC Suite under a Windows VM, as I do not run Windows at home. Enabling USB passthrough for the phone to the VM let Windows see the phone, but the LG drivers would invariably fail with 'Device cannot start. Code 10.'. Likewise, the PC Suite couldn't find the phone.
Next step was to throw together some spare hw and install Windows 7 on that (a desparate move, to be certain. ). The LG drivers can now recognize the phone, so that's a definite plus. The LG PC Suite, though, claimed that my phone could not be upgraded. Wonderful.
Next step was to try this tutorial: http://www.androidrootz.com/2014/07/how-to-unroot-lg-g3-all-variants.html . I was able to get further with this method, but as it begins to flash SYSTEM, it pauses, and then dies with 'We can't communicate with Phone'. End result - I now have a soft bricked phone. On the phone, I see the port - COM41 - appear, and the usb animation starts to spin ... and after a few seconds, stops. It's at this point that Flashtool throws the Can't Connect error.
I next tried following this tutorial: http://forum.xda-developers.com/showthread.php?t=2785089 to flash a KDZ. The newer LG Flash tool used here can't create a connection to my phone for flashing.
I've run into a wall here. Any ideas on where to go next? I need to reset this phone back to a working stock state so that I can send it back.
http://lgg3root.com/lg-g3-root/how-to-unrootunbrick-lg-g3/
Use this and follow video carefully. Has worked many times. Use all his links not what you have downloaded.
NOTE 4
BACARDILIMON said:
http://lgg3root.com/lg-g3-root/how-to-unrootunbrick-lg-g3/
Use this and follow video carefully. Has worked many times. Use all his links not what you have downloaded.
NOTE 4
Click to expand...
Click to collapse
Also - as silly as it sounds, make certain you're using the USB cable that came with the phone. This has solved problems for a lot of people when trying to revert to stock.
etawful said:
Also - as silly as it sounds, make certain you're using the USB cable that came with the phone. This has solved problems for a lot of people when trying to revert to stock.
Click to expand...
Click to collapse
I wasn't initially, but I did switch to it last night. Still no go.
I suspect it's either the phone itself (see above: re suspected hw failure), or the PC in question (nVidia chipset on this old motherboard, and I've had more than a few problems with adb talking to phones on nVidia motherboards). I'm going to try Bacardilimon's suggestion tonight, on a PC that has *nothing* nVidia-related in it, before I throw in the towel. As it is, the failing phone needs to be back to TMO by the middle of next week, so I'm all but out of time to resolve this.
Drake Maijstral said:
I recently picked up a D851 (TMobile). I rooted it, but did not replace the ROM or install a custom bootloader.
Last weekend, the phone started randomly rebooting. Watching logcat via adb showed me several random apps throwing sig11s, after which the phone would give up and reboot. Cycle repeats.
This looks like a hardware issue, as the apps that crash change on each boot cycle.
I arranged with TMobile to swap the device, but they cautioned me that the phone must be returned to an unrooted state.
I've had a hell of a time with it from here. My first try was to install the LG drivers and the PC Suite under a Windows VM, as I do not run Windows at home. Enabling USB passthrough for the phone to the VM let Windows see the phone, but the LG drivers would invariably fail with 'Device cannot start. Code 10.'. Likewise, the PC Suite couldn't find the phone.
Next step was to throw together some spare hw and install Windows 7 on that (a desparate move, to be certain. ). The LG drivers can now recognize the phone, so that's a definite plus. The LG PC Suite, though, claimed that my phone could not be upgraded. Wonderful.
Next step was to try this tutorial: http://www.androidrootz.com/2014/07/how-to-unroot-lg-g3-all-variants.html . I was able to get further with this method, but as it begins to flash SYSTEM, it pauses, and then dies with 'We can't communicate with Phone'. End result - I now have a soft bricked phone. On the phone, I see the port - COM41 - appear, and the usb animation starts to spin ... and after a few seconds, stops. It's at this point that Flashtool throws the Can't Connect error.
I next tried following this tutorial: http://forum.xda-developers.com/showthread.php?t=2785089 to flash a KDZ. The newer LG Flash tool used here can't create a connection to my phone for flashing.
I've run into a wall here. Any ideas on where to go next? I need to reset this phone back to a working stock state so that I can send it back.
Click to expand...
Click to collapse
There is a link in the general thread on how to return to stock including a method using twrp. It's a sticky thread at the top I've never done the twrp method myself but it can more than likely be done without a computer. Twrp can be installed via Playstore if you don't already have it
BACARDILIMON said:
httx://lgg3root.com/lg-g3-root/how-to-unrootunbrick-lg-g3/
Use this and follow video carefully. Has worked many times. Use all his links not what you have downloaded.
NOTE 4
Click to expand...
Click to collapse
Holy hell. That site's links are absolutely infuriating. Anyone who puts each and every download link for software referenced by a howto behind separate timed appearance links that you have to ALSO enter an annoying captcha to enable should be shot out of a cannon - or, at the very least, have their howto ignored by the rest of the world.
Suffice it to say, the quality of that page doesn't give me much confidence that this will work any better than what I've tried already. Since I've already wasted a crapload of time on this project, and more on following those damned links, I'll give it a try tonight, but I'm not going to hold my breath.
Is the author of that page an XDA member? If so, please let me know who he is, so I can berate him personally. Thanks.
Toneman07 said:
There is a link in the general thread on how to return to stock including a method using twrp. It's a sticky thread at the top I've never done the twrp method myself but it can more than likely be done without a computer. Twrp can be installed via Playstore if you don't already have it
Click to expand...
Click to collapse
I'd consider doing that, except as I mentioned, the G3 in question disconnected during a run of Flashtool, rendering it without a working OS to boot to. The phone now boots straight to download mode. The good news is, it's now officially unrooted. The bad news is, it's also officially bricked until I can get an OS flash to work.
Drake Maijstral said:
Holy hell. That site's links are absolutely infuriating. Anyone who puts each and every download link for software referenced by a howto behind separate timed appearance links that you have to ALSO enter an annoying captcha to enable should be shot out of a cannon - or, at the very least, have their howto ignored by the rest of the world.
Suffice it to say, the quality of that page doesn't give me much confidence that this will work any better than what I've tried already. Since I've already wasted a crapload of time on this project, and more on following those damned links, I'll give it a try tonight, but I'm not going to hold my breath.
Is the author of that page an XDA member? If so, please let me know who he is, so I can berate him personally. Thanks.
Click to expand...
Click to collapse
OK I gonna keep it real with you. You can either enter the captcha and fix the issue or throw the phone away. Yes he is a member and for every phone that is out their he has its own page doing this for us. If you can't fix your phone with his method then it not the method but you. I have used this for many bricks. It works and it works great. Sorry if he making you do a little typing but like I said u can use his method or keep trying the other methods. Good luck
NOTE 4
BACARDILIMON said:
OK I gonna keep it real with you. You can either enter the captcha and fix the issue or throw the phone away. Yes he is a member and for every phone that is out their he has its own page doing this for us. If you can't fix your phone with his method then it not the method but you. I have used this for many bricks. It works and it works great. Sorry if he making you do a little typing but like I said u can use his method or keep trying the other methods. Good luck
NOTE 4
Click to expand...
Click to collapse
After going through the painful process of clicking his links, I found that everything I downloaded is the same thing I already had, except for Flashtool - lgg3root's is actually older. Even the TMO firmware for my phone and the dll are both exactly the same, and I checked by running md5sum on them.
But hey, it must be me. There's clearly no other technology-related cause for this issue. I obviously don't know how to follow a howto, right?
Thanks for 'keeping it real'.
Drake Maijstral said:
After going through the painful process of clicking his links, I found that everything I downloaded is the same thing I already had, except for Flashtool - lgg3root's is actually older. Even the TMO firmware for my phone and the dll are both exactly the same, and I checked by running md5sum on them.
But hey, it must be me. There's clearly no other technology-related cause for this issue. I obviously don't know how to follow a howto, right?
Thanks for 'keeping it real'.
Click to expand...
Click to collapse
See we agree.
NOTE 4
BACARDILIMON said:
See we agree.
NOTE 4
Click to expand...
Click to collapse
Not likely.
In any case, it failed again. The video he did gave me the exact same steps I followed elsewhere, and unsurprisingly, it failed with 'We can't communicate with Phone', after beginning the flash process. There is something else wrong here, though I'm not certain if the failing phone is at fault or the PC in question is causing the issue. To be crystal clear, the flash process starts, and then, at a random point during the flash, it completely stops, and Flashtool eventually gives up and throws the aforementioned error.
Any other ideas? If not, I'm going to have to try another PC to rule that out as the culprit. Sigh.
Mine gave the same error as well as couldn't communicate with server but the flash process continued running and the phone rebooted took about 3 minutes u learned not to touch any of the popups on the screen during flash and sorry I missed the part about no OS I thought you were booting to recovery... Driving while reading not the best idea
Toneman07 said:
Mine gave the same error as well as couldn't communicate with server but the flash process continued running and the phone rebooted took about 3 minutes u learned not to touch any of the popups on the screen during flash and sorry I missed the part about no OS I thought you were booting to recovery... Driving while reading not the best idea
Click to expand...
Click to collapse
Nope, the phone is definitely not doing anything - the usb animation on the G3 completely stops before Flashtool throws the error.
And damnit, quit reading while driving. You can do that later.
Moved the hdd Windows is installed on to another PC with a different chipset. After it updated drivers, I tried again. Flash proceeded partway, then died. Reset phone, Flashtool reststarted flash from scratch, flash died at 15%.
15% is interesting. While I've seen the flash die at various points, 15% is the one that was most often repeated. This tells me the failure follows the phone, not the PC - which makes sense, as the phone has a suspected RAM failure.
At this point, it appears that flashing this phone is impossible due to faulty hw. Hopefully TMO (and eventually, LG) will accept the faulty phone back with no OS, because there's no way an OS is being written to this device ever again.
Thank you for answering
yanowman said:
Thank you for answering
Click to expand...
Click to collapse
No problem. There's nothing I hate more than stumbling across a thread where the OP has the same problem I have, only to find it was never updated with the solution.
Good luck man let us know what tmobile says
Related
I attempted a root on Samsung Note 2 Sprint version (in white). Followed all steps, however phone got stuck in a reboot loop right after I put the option 2 (root only) Odin step in. Sprint ver LPH889 (I believe that is what Odin is calling it, option 72). Toolkit used was ADB 4.1.0.
Original symptoms were that the Android updater was looping trying to load everything; being new I made it worse and tried recoveries and reloads which also failed. Now it boots, goes to splash, circling blue oval image and...it stays there.
Good news: I have access to download mode and recovery reset mode (including sideloading).
Bad news: every thread I've followed has given me an issue.
I have recovery access but I need some idea of where to go from here and searches have shown near but not exact symptoms. I have unplugged it from the pc, removed the battery, done a factory reset, attempted to reflash via Odin (root) attempted to reflash stock via Odin and so far I am still stuck in a reboot loop. Windows detects the phone but shows a problem in device manager because possibly it won't stop rebooting. Any help you can provide is appreciated and if at all possible I need to recover some form of working phone here, and soon. My girl needs it for work and Sprint's network in my area barely works from day to day (which they admit but don't credit my account for). This phone has problems sending/receiving calls, they claim it's fine, and I was forced to try a root to get some form of working device. That failed too.
I'm a newb at this...it's been years since I flashed a phone (Razor v3), so...any help would be appreciated, otherwise I have to crawl to sprint/samsung and get it replaced, which I don't want to do. Thanks.
doesitwork? said:
I attempted a root on Samsung Note 2 Sprint version (in white). Followed all steps, however phone got stuck in a reboot loop right after I put the option 2 (root only) Odin step in. Sprint ver LPH889 (I believe that is what Odin is calling it, option 72). Toolkit used was ADB 4.1.0.
Original symptoms were that the Android updater was looping trying to load everything; being new I made it worse and tried recoveries and reloads which also failed. Now it boots, goes to splash, circling blue oval image and...it stays there.
Good news: I have access to download mode and recovery reset mode (including sideloading).
Bad news: every thread I've followed has given me an issue.
I have recovery access but I need some idea of where to go from here and searches have shown near but not exact symptoms. I have unplugged it from the pc, removed the battery, done a factory reset, attempted to reflash via Odin (root) attempted to reflash stock via Odin and so far I am still stuck in a reboot loop. Windows detects the phone but shows a problem in device manager because possibly it won't stop rebooting. Any help you can provide is appreciated and if at all possible I need to recover some form of working phone here, and soon. My girl needs it for work and Sprint's network in my area barely works from day to day (which they admit but don't credit my account for). This phone has problems sending/receiving calls, they claim it's fine, and I was forced to try a root to get some form of working device. That failed too.
I'm a newb at this...it's been years since I flashed a phone (Razor v3), so...any help would be appreciated, otherwise I have to crawl to sprint/samsung and get it replaced, which I don't want to do. Thanks.
Click to expand...
Click to collapse
What method are you using to root.....I used the "toolkit" and had no problems at all.
http://forum.xda-developers.com/showthread.php?t=1957155....try this if you haven't already
vel7wil said:
What method are you using to root.....I used the "toolkit" and had no problems at all.
http://forum.xda-developers.com/showthread.php?t=1957155....try this if you haven't already
Click to expand...
Click to collapse
I thought it would to but I did not want to dig through 70+ pages of the thread when searching failed...unless I really needed to. Most of it is old and doesn't apply.
I was directed by the referenced Youtube vid. I used the options referenced for the phone in this thread with that toolkit. I backed up existing files (not as one unit, but internal files and I think OS), went for the option 2, followed the instructions and things went great through odin...until android went to update and started looping with the 'updating files' percentages. At that point I tried to restore to basic and started clearing caches and such and that is how I got to where I am.
When that failed I started looking at the leaked stock flash and that failed on shoot.ini which that guy never addressed because he thought his international version was all versions (that's why I choose 'doesitwork?' as screen name ). So i'm down to sideloading or something. I really need guidance, and I emailed the toolkit author but I'm still waiting on a reply.
Any thoughts?
doesitwork? said:
I thought it would to but I did not want to dig through 70+ pages of the thread when searching failed...unless I really needed to. Most of it is old and doesn't apply.
I was directed by the referenced Youtube vid. I used the options referenced for the phone in this thread with that toolkit. I backed up existing files (not as one unit, but internal files and I think OS), went for the option 2, followed the instructions and things went great through odin...until android went to update and started looping with the 'updating files' percentages. At that point I tried to restore to basic and started clearing caches and such and that is how I got to where I am.
When that failed I started looking at the leaked stock flash and that failed on shoot.ini which that guy never addressed because he thought his international version was all versions (that's why I choose 'doesitwork?' as screen name ). So i'm down to sideloading or something. I really need guidance, and I emailed the toolkit author but I'm still waiting on a reply.
Any thoughts?
Click to expand...
Click to collapse
When used the toolkit a year ago, I found that I had to turned off all firewalls and antivirus apps for it to work properly. Once I did that it worked fine....give it a shot...can't hurt......might even be able to repair what you've done so far.....Good Luck!!!
I'll give this my best shot...download a rooted rom from the development section and place it on your SD card.
Download toolkit from here (I take no credit for this) http://d-h.st/iu0
Put phone in download mode.
Open ODIN and uncheck "auto reboot". Then click "PDA" and add the .tar file (recovery).
Plug phone into PC (make sure to have samsung drivers installed).
Once ODIN sees the phone you can click "start".
When the recovery flash is complete, pull your battery to ensure power down.
Boot into recovery : volume up, home, power all at the same time.
Flash rooted rom.
Toolkit is an extra and unnecessary step.
http://rwilco12.com/downloads.php?d...ung Galaxy Note II (SPH-L900)/Stock ROMs/MC2/
Grab the one click flavor of choice. Use the one with 1090526 in the name as that's the full version.
Open in windows, put phone in download mode and flash. Easy Peasy.
Let me know if you have any issues with this.
Sorry for the late reply, I had some issues with the "catchpa".
The one click fix worked like a charm, thank you! I will soon be making a contrib to the site. It's a shame I couldn't root as easily :laugh: .
I know the level of work that goes into this stuff and the desire to keep on top of new gear while maintaining support for the old and I appreciate the community coming to my aid, so again, thank you!
---------- Post added at 08:14 AM ---------- Previous post was at 07:36 AM ----------
[/COLOR]
doesitwork? said:
Sorry for the late reply, I had some issues with the "catchpa".
The one click fix worked like a charm, thank you! I will soon be making a contrib to the site. It's a shame I couldn't root as easily :laugh: .
I know the level of work that goes into this stuff and the desire to keep on top of new gear while maintaining support for the old and I appreciate the community coming to my aid, so again, thank you!
Click to expand...
Click to collapse
It is usually a pretty common courtesy to hit the "thanks button" when someone helps you out.
I am not at all trying to be mean, just letting you know.
garwynn said:
Toolkit is an extra and unnecessary step.
http://rwilco12.com/downloads.php?d...ung Galaxy Note II (SPH-L900)/Stock ROMs/MC2/
Grab the one click flavor of choice. Use the one with 1090526 in the name as that's the full version.
Open in windows, put phone in download mode and flash. Easy Peasy.
Let me know if you have any issues with this.
Click to expand...
Click to collapse
hello @garwynn im trying to do this same thing.. its been so long since ive odin'd, how would i put TWRP on this now after these steps? i tried goomanager and that didnt work. (couldnt find recovery) and i tried flashing in stock recovery and got a fail . im kind of lost right now and am wondering if there is another way or do i have to do the toolkit? thanks
edit: for some reason, the tool kit links have been pulled by a mod. ..but this video helped me get twrp back. phew. zedomax to the rescue.. http://www.youtube.com/watch?v=7leb9OznhqY
so yesterday i installed the new optimus de rom and it started up fine and everything was okay, then today i realized my 3g wasnt working and usually thats no big deal because all i have to do is restore my efs in the app FreeG (I think thats what its called, I might be wrong). Well right after i did that, i hit restart phone and it turned off then wouldnt come back on. Then i finally got to the LG symbol but it will turn off then the screen will be on but will just show black. I cant boot in to recovery nor can i do anything on it at all, when i plug it in the charger it says "battery.png is missing, battery: 75%". I took my phone in to sprint and they did a reset although that didnt do anything so there sending me a new one. Now my question is, is there any way I can open up my phones folder so i can get my pictures and everything that was on it? My pics were very important to me and i dont want to lose them, thats all i need so if some could help me get them that would be much appreciated, thanks.
Penley94 said:
so yesterday i installed the new optimus de rom and it started up fine and everything was okay, then today i realized my 3g wasnt working and usually thats no big deal because all i have to do is restore my efs in the app FreeG (I think thats what its called, I might be wrong). Well right after i did that, i hit restart phone and it turned off then wouldnt come back on. Then i finally got to the LG symbol but it will turn off then the screen will be on but will just show black. I cant boot in to recovery nor can i do anything on it at all, when i plug it in the charger it says "battery.png is missing, battery: 75%". I took my phone in to sprint and they did a reset although that didnt do anything so there sending me a new one. Now my question is, is there any way I can open up my phones folder so i can get my pictures and everything that was on it? My pics were very important to me and i dont want to lose them, thats all i need so if some could help me get them that would be much appreciated, thanks.
Click to expand...
Click to collapse
The key here is going to be getting back into recovery. Have you tried getting into Download Mode? If you saw the LG logo then you SHOULD be able to get into download mode. Make sure the phone is completely powered off. Connect the USB to your pc but before you connect the other end to your phone, hold volume up then connect it. You should see "Download Mode" on the screen. You will see other directions for download mode but for me this always works, usb to pc, hold volume up then plug the phone in while still holding the volume up. If you can get into Download Mode you can flash a teenybin to get back into recovery following the guide in this thread here.
Currently even if you can get into Download Mode adb might not recognize your phone(at least it never did for me). Once you flash a teenybin using LGNPST, you should be able to get into Recovery. Once in Recovery you can use adb to pull your files off of the phone and onto your computer. I use it from a linux terminal but there are guides available for Windows if that's what you use. The adb guide should be easy to find on xda(just search) so I haven't linked to it. Once adb is set up on your computer AND you can get into Recovery you can use the command 'adb pull /data/media' without quotations and it will copy the contents of your internal storage to your pc. However if you can get into recovery you do have other options for just getting the phone back up and running. This guide here should also help.
If you are familiar with irc(internet relay chat) you can hop onto freenode and enter the #lg-optimus-g channel. As soon as you enter the channel you will see "Need Help? You won't read this but..." followed by a link. All the files for LGNPST, teenybins, and in depth tutorials on fixing a soft brick will be found there. I hope this helps you and hooray for me because this is my 200th post!
PS - If you can't get into Download Mode then your secondary bootloader is gone and there isn't anything you can do(to my knowledge). However, like I said, if you saw the LG logo at all, Download mode should still be an option. Also keep in mind these instructions are for the Sprint(ls970) lg optimis g. I believe the keys are flipped on AT&T/International models(Volume Down when you plug it in to get to Download Mode).
HPTesla said:
The key here is going to be getting back into recovery. Have you tried getting into Download Mode? If you saw the LG logo then you SHOULD be able to get into download mode. Make sure the phone is completely powered off. Connect the USB to your pc but before you connect the other end to your phone, hold volume up then connect it. You should see "Download Mode" on the screen. You will see other directions for download mode but for me this always works, usb to pc, hold volume up then plug the phone in while still holding the volume up. If you can get into Download Mode you can flash a teenybin to get back into recovery following the guide in this thread here.
Currently even if you can get into Download Mode adb might not recognize your phone(at least it never did for me). Once you flash a teenybin using LGNPST, you should be able to get into Recovery. Once in Recovery you can use adb to pull your files off of the phone and onto your computer. I use it from a linux terminal but there are guides available for Windows if that's what you use. The adb guide should be easy to find on xda(just search) so I haven't linked to it. Once adb is set up on your computer AND you can get into Recovery you can use the command 'adb pull /data/media' without quotations and it will copy the contents of your internal storage to your pc. However if you can get into recovery you do have other options for just getting the phone back up and running. This guide here should also help.
If you are familiar with irc(internet relay chat) you can hop onto freenode and enter the #lg-optimus-g channel. As soon as you enter the channel you will see "Need Help? You won't read this but..." followed by a link. All the files for LGNPST, teenybins, and in depth tutorials on fixing a soft brick will be found there. I hope this helps you and hooray for me because this is my 200th post!
PS - If you can't get into Download Mode then your secondary bootloader is gone and there isn't anything you can do(to my knowledge). However, like I said, if you saw the LG logo at all, Download mode should still be an option. Also keep in mind these instructions are for the Sprint(ls970) lg optimis g. I believe the keys are flipped on AT&T/International models(Volume Down when you plug it in to get to Download Mode).
Click to expand...
Click to collapse
Thank you for the response, i just tryed to get in to download mode and it went in to it fine. I would try to do all that to repair it but I dont want sprint to see that its rooted and it I cant have it be fixed when the new phone comes in, the only thing that i want is to get my files from it. Is there any way that I can just do that but leave the phone the way it is? (Not booting up passed the lg logo) I want the new phone because my current Optimus G's battery is going pretty bad I think and I would like a new one.
Penley94 said:
Thank you for the response, i just tryed to get in to download mode and it went in to it fine. I would try to do all that to repair it but I dont want sprint to see that its rooted and it I cant have it be fixed when the new phone comes in, the only thing that i want is to get my files from it. Is there any way that I can just do that but leave the phone the way it is? (Not booting up passed the lg logo) I want the new phone because my current Optimus G's battery is going pretty bad I think and I would like a new one.
Click to expand...
Click to collapse
There are plenty of ways to get it stuck at the lg logo, sometimes it happens just from dirty flashing a rom, sometimes because you install a rom without wiping dalvik/cache. But you should know if you are on Sprint, one of the reasons I stick with them(even though their coverage is horrible in my area) is because rooting DOES NOT void your warranty with Sprint. They will warn you against it but they are the only carrier that allows rooting and will still fix your phone. Here is some info on that here. They won't advertise it but it's the truth. But bricking your phone intentionally is pretty easy I think. After getting back your data, just go into recovery and start deleting stuff you normally wouldn't. It's similar to opening up your car's hood and saying "This looks important" and ripping it out, lol. At this point that's what I would do, fixing your rooted phone is within their warranty, replacing it(which is what you want) I'm not 100% on. Although the post I linked to, says even ordering a replacement on a rooted phone is covered. Its in a reply on that page, you'll see another link. So you could get your info, use a different LGNPST file to set your phone back to factory(which will relock the bootloader and lose root) and then you can do what you did to get there in the first place or root it and start deleting important files with a root explorer to get it back to being stuck. Hope this helps.
HPTesla said:
There are plenty of ways to get it stuck at the lg logo, sometimes it happens just from dirty flashing a rom, sometimes because you install a rom without wiping dalvik/cache. But you should know if you are on Sprint, one of the reasons I stick with them(even though their coverage is horrible in my area) is because rooting DOES NOT void your warranty with Sprint. They will warn you against it but they are the only carrier that allows rooting and will still fix your phone. Here is some info on that here. They won't advertise it but it's the truth. But bricking your phone intentionally is pretty easy I think. After getting back your data, just go into recovery and start deleting stuff you normally wouldn't. It's similar to opening up your car's hood and saying "This looks important" and ripping it out, lol. At this point that's what I would do, fixing your rooted phone is within their warranty, replacing it(which is what you want) I'm not 100% on. Although the post I linked to, says even ordering a replacement on a rooted phone is covered. Its in a reply on that page, you'll see another link. So you could get your info, use a different LGNPST file to set your phone back to factory(which will relock the bootloader and lose root) and then you can do what you did to get there in the first place or root it and start deleting important files with a root explorer to get it back to being stuck. Hope this helps.
Click to expand...
Click to collapse
Oh wow I never knew that but that helps a lot thanks for the help, the sprint guy said theydid a master reset or hard reset or soemthing like that, does that mean it deleted all my pictures and everything? And i understand what you mean to rebrick it that's pretty simple. When i get my new optimus is there a new root out for the update? And what roms do you prefer?
Penley94 said:
Oh wow I never knew that but that helps a lot thanks for the help, the sprint guy said theydid a master reset or hard reset or soemthing like that, does that mean it deleted all my pictures and everything? And i understand what you mean to rebrick it that's pretty simple. When i get my new optimus is there a new root out for the update? And what roms do you prefer?
Click to expand...
Click to collapse
If they did a hard reset it is possible that it wiped everything but not a definite. I purchased my phone from Best Buy and was on zvb. When the zvc update came through it messed my phone up(which is why you don't take OTA's once rooted without further knowledge/modifications) so I took it to Best Buy and they said they did a hard reset to fix it. It worked, my phone booted back up and my internal was fine. However, that's Best Buy and they barely know what they are doing so it may have been a soft reset, I am not 100% sure. As for a new root for the update, I received another phone shortly after because the glass back on mine broke and Best Buy replaced it with a whole new phone. It was on zvc and I used an app named Framaroot with the Gandalf exploit option and it worked fine for me. I have heard of others having issues with that method but for me, it worked and has stuck.
Fiddy619's universal root method seems to be the preferred way for our phone, look in the general section here for a thread by engine95 to see what I mean. After I rooted with Framaroot I then used FreeGee and unlocked the bootloader then made a total nandroid backup of my stock in TWRP before going further. I also copied the backup to my PC just in case.
As for my preferred roms, if we are talking about Android 4.4 both Vanir and PSX are my personal favorites. However as you can tell from my signature I am still using stock zvc android 4.1.2. I have flashed just about every rom available for our phone but my daily driver is stock that I have modified manually(different kernel, removed bloat ware, minor modifications and tweaks, etc). For android 4.3 I have had the best experience with CM10.2 and cfxe. I have not tried CM11(based on 4.4) for awhile but it seems to have overwhelming support - Cyanogenmod usually does.
Really when it comes to roms it's personal preference. They are all very similar with different tweaks/additions. As for which one is the most stable that is also a tricky question. Even though we have the same model of phone, I have seen how picky they can be from one to the other. My roommates have the EXACT same phone, installing CM10.2 worked fine for two of us, but one lost GPS and I had to fix it.
My best advice for when you get your new phone is to backup your working stock and then have fun flashing different things making sure you follow the instructions per rom exactly. It's always a good idea after making your backup(if planning to install another rom) to wipe everything except your internal storage and do a clean install of the rom and gapps. Then, test it for a day or so because sometimes it takes time to settle in. It's a shame that Optimus DE gave you issues, it was rock solid for me, again, these phones are picky! But one of the main reasons I stayed with stock is because the AOSP based cameras leave much to be desired when compared to the LG camera. Again it's just personal preference because some don't like the lg camera.
If you have any other issues or questions I will be glad to help if I can. A lot of the people you see who are active on the forums are very knowledgeable, as long as you ask politely most will be glad to help.
HPTesla said:
If they did a hard reset it is possible that it wiped everything but not a definite. I purchased my phone from Best Buy and was on zvb. When the zvc update came through it messed my phone up(which is why you don't take OTA's once rooted without further knowledge/modifications) so I took it to Best Buy and they said they did a hard reset to fix it. It worked, my phone booted back up and my internal was fine. However, that's Best Buy and they barely know what they are doing so it may have been a soft reset, I am not 100% sure. As for a new root for the update, I received another phone shortly after because the glass back on mine broke and Best Buy replaced it with a whole new phone. It was on zvc and I used an app named Framaroot with the Gandalf exploit option and it worked fine for me. I have heard of others having issues with that method but for me, it worked and has stuck.
Fiddy619's universal root method seems to be the preferred way for our phone, look in the general section here for a thread by engine95 to see what I mean. After I rooted with Framaroot I then used FreeGee and unlocked the bootloader then made a total nandroid backup of my stock in TWRP before going further. I also copied the backup to my PC just in case.
As for my preferred roms, if we are talking about Android 4.4 both Vanir and PSX are my personal favorites. However as you can tell from my signature I am still using stock zvc android 4.1.2. I have flashed just about every rom available for our phone but my daily driver is stock that I have modified manually(different kernel, removed bloat ware, minor modifications and tweaks, etc). For android 4.3 I have had the best experience with CM10.2 and cfxe. I have not tried CM11(based on 4.4) for awhile but it seems to have overwhelming support - Cyanogenmod usually does.
Really when it comes to roms it's personal preference. They are all very similar with different tweaks/additions. As for which one is the most stable that is also a tricky question. Even though we have the same model of phone, I have seen how picky they can be from one to the other. My roommates have the EXACT same phone, installing CM10.2 worked fine for two of us, but one lost GPS and I had to fix it.
My best advice for when you get your new phone is to backup your working stock and then have fun flashing different things making sure you follow the instructions per rom exactly. It's always a good idea after making your backup(if planning to install another rom) to wipe everything except your internal storage and do a clean install of the rom and gapps. Then, test it for a day or so because sometimes it takes time to settle in. It's a shame that Optimus DE gave you issues, it was rock solid for me, again, these phones are picky! But one of the main reasons I stayed with stock is because the AOSP based cameras leave much to be desired when compared to the LG camera. Again it's just personal preference because some don't like the lg camera.
If you have any other issues or questions I will be glad to help if I can. A lot of the people you see who are active on the forums are very knowledgeable, as long as you ask politely most will be glad to help.
Click to expand...
Click to collapse
Okay Im going to try some new roms out when I get my new phone, I would like to try out an AOSP Kitkat Rom but I couldnt get one to flash last time I tryed but I will figure that out later when I get it. Now back to my Bricked Optimus, I want to try the teenybin method although I dont understand the directions... the second step tells me to flash but how can I do that without recovery? and it doesnt say anything about entering in download mode which is the only thing I can do, am I forgetting something? And thank you for the help Tesla I really appreciate it, Ive had more assistance from you than anyone else.
Penley94 said:
Okay Im going to try some new roms out when I get my new phone, I would like to try out an AOSP Kitkat Rom but I couldnt get one to flash last time I tryed but I will figure that out later when I get it. Now back to my Bricked Optimus, I want to try the teenybin method although I dont understand the directions... the second step tells me to flash but how can I do that without recovery? and it doesnt say anything about entering in download mode which is the only thing I can do, am I forgetting something? And thank you for the help Tesla I really appreciate it, Ive had more assistance from you than anyone else.
Click to expand...
Click to collapse
Are you a windows user? The teenybin isn't flashed from recovery it is flashed from a tool called LGNPST which is a Windows program. I am going to private message you a link. It will have links for downloading and installing LGNPST on your PC. It says that you will lose all your data but if you are using the teenybin you shouldn't. It's LG's tool for flashing firmware and gives that warning regardless of what you flash. And you're welcome, coming from an EVO 4G this phone is very different and plenty of people have helped me - just paying it forward.
HPTesla said:
Are you a windows user? The teenybin isn't flashed from recovery it is flashed from a tool called LGNPST which is a Windows program. I am going to private message you a link. It will have links for downloading and installing LGNPST on your PC. It says that you will lose all your data but if you are using the teenybin you shouldn't. It's LG's tool for flashing firmware and gives that warning regardless of what you flash. And you're welcome, coming from an EVO 4G this phone is very different and plenty of people have helped me - just paying it forward.
Click to expand...
Click to collapse
Hey I got in to recovery through the Teenybin although the reset that they did deleted all of my stuff so Im kinda bummed:/ but its okay cause I got my new Optimus today and its brand new so Im happy with it. Thanks again for all of the help. Thats funny that you used to have an EVO 4G because I had it for so long and thats the phone I switched back to when my LG got bricked, but let me tell you Im glad to be back to the Optimus haha the EVO 4G is just way to slow anymore. Now that I have this new Optimus which root method should I go with? Its currently runnning ZVB (4.1.2) should I update the software? It says theres a software update available but I know that sometimes they dont have roots out for those updates so how should I start with this process again with the new phone in your opinion? I havnt done this in forever (going on a year) so I cant really remember everything that I had to do.
Penley94 said:
Hey I got in to recovery through the Teenybin although the reset that they did deleted all of my stuff so Im kinda bummed:/ but its okay cause I got my new Optimus today and its brand new so Im happy with it. Thanks again for all of the help. Thats funny that you used to have an EVO 4G because I had it for so long and thats the phone I switched back to when my LG got bricked, but let me tell you Im glad to be back to the Optimus haha the EVO 4G is just way to slow anymore. Now that I have this new Optimus which root method should I go with? Its currently runnning ZVB (4.1.2) should I update the software? It says theres a software update available but I know that sometimes they dont have roots out for those updates so how should I start with this process again with the new phone in your opinion? I havnt done this in forever (going on a year) so I cant really remember everything that I had to do.
Click to expand...
Click to collapse
Let your phone update before rooting and unlocking. You should end up with ZVC.
Then, you have a choice on rooting. @HPTesla will say Framaroot. I'd say use fiddy Universal root.
Then DL FreeGee from the Playstore, use the"mako" version of TWRP/CWM, your choice, I'd do with TWRP and you'll be unlocked.
Back it up in recovery and you'll be good to go.
Sent from my LG-LS970 using XDA Premium 4 mobile app
engine95 said:
Let your phone update before rooting and unlocking. You should end up with ZVC.
Then, you have a choice on rooting. @HPTesla will say Framaroot. I'd say use fiddy Universal root.
Then DL FreeGee from the Playstore, use the"mako" version of TWRP/CWM, your choice, I'd do with TWRP and you'll be unlocked.
Back it up in recovery and you'll be good to go.
Sent from my LG-LS970 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
The fiddy universal looks easier to me so I will probably use that although its not very Important which ever one is better I will use, and what recovery do you think is better? I used TWRP before but is the other one any better? I will probably go with that anyways Im just trying to get some opinions in. And what ROM do you use? I think Im gonna start out with the stock rooted ROM but theres still some stuff I want from the DE ROM like the G2 keyboard and other features from the G2, is there any way I can get those? And have you had any experience with the KitKat ROMs? Those interest me too
engine95 said:
Let your phone update before rooting and unlocking. You should end up with ZVC.
Then, you have a choice on rooting. @HPTesla will say Framaroot. I'd say use fiddy Universal root.
Then DL FreeGee from the Playstore, use the"mako" version of TWRP/CWM, your choice, I'd do with TWRP and you'll be unlocked.
Back it up in recovery and you'll be good to go.
Sent from my LG-LS970 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Exactly what he said, framaroot was quick and easy for me, but the lgog is so damn picky and fiddy seems to be the preferred method so use it just to be safe. I had zero issues with framaroot but I think I've just been lucky. And definitely update to zvc before doing either. I'd also update prl and profile for good measure.
That sucks that you lost all of your data, they must have actually did a hard reset where as BestBuy told me they did a hard reset and actually did a soft reset. But it's BestBuy so I never expect much. I softbricked my lgog the day after I got it using the GAIO tool(before finding out about FreeGee) and they fixed it with a soft reset. The guy called the manager over and the manager asked me if I tried unlocking the bootloader and I played dumb. My exact words were "What the hell is a bootloader?" and he immediately fixed it. But I was shocked anyone at BestBuy would even know that. Lmao.
As for my EVO, the micro usb port broke so I was charging it for two months like MacGyver, literally stipped the usb charging wire and hooked it straight into the positive/negative terminals in the battery while turned off! It was a fire hazard but it did the trick, lol. And luckily it had external sd(my one big gripe about the lgog) so I could still get my stuff off of it even without usb. I did love that phone, but you're right, it's incredibly slow now compared to the wonderful lgog.
And as always you are quite welcome!
---------- Post added at 07:39 PM ---------- Previous post was at 07:30 PM ----------
Penley94 said:
The fiddy universal looks easier to me so I will probably use that although its not very Important which ever one is better I will use, and what recovery do you think is better? I used TWRP before but is the other one any better? I will probably go with that anyways Im just trying to get some opinions in. And what ROM do you use? I think Im gonna start out with the stock rooted ROM but theres still some stuff I want from the DE ROM like the G2 keyboard and other features from the G2, is there any way I can get those? And have you had any experience with the KitKat ROMs? Those interest me too
Click to expand...
Click to collapse
I think the reason I say framaroot is bc its also super easy, install the app, pick gandalf exploit and it will do it's thing - done without ever connecting to a pc. But @engine95 is right, fiddy is more stable so use that. As for TWRP, I love 2.5.0.0 but for KK roms you have to use the one that comes with updated FreeGee, TWRP 2.6.3.x because of the SELinux changes Google made with 4.4. TWRP 2.6 was unstable originally but has since become just as stable as 2.5 according to most. OpTimuS DE was rock solid for me, as for getting some of the G2 apps, I'm not certain. It's doable but I don't know how difficult it would be because I've never tried to install them elsewhere. And I already gave you my choice of best current KK roms but today I found out a few guys are trying to get OMNI official for us. When that happens I think I will be switching to OMNI because they have been producing some impressive commits/tweaks that you won't find elsewhere. Just look through xda news to see what I mean, OMNI is on a roll!
Penley94 said:
The fiddy universal looks easier to me so I will probably use that although its not very Important which ever one is better I will use, and what recovery do you think is better? I used TWRP before but is the other one any better? I will probably go with that anyways Im just trying to get some opinions in. And what ROM do you use? I think Im gonna start out with the stock rooted ROM but theres still some stuff I want from the DE ROM like the G2 keyboard and other features from the G2, is there any way I can get those? And have you had any experience with the KitKat ROMs? Those interest me too
Click to expand...
Click to collapse
I prefer TWRP just because that has always been our best one since the beginning. Now that all the versions of the OG are coming together though both are fine.
I like stock, but Lrod's OpTimuS 5.0 is my daily. The G2 adds he made got me hooked.
If your gonna try to pull some stuff from DE, check with Lrod. He's made alot of changes to a lot of files making it difficult. For me at least.
I've ran all the KK Roms and I liked them all. PSX is probably my favorite though. I liked Liquid in its early days, pre KK. I'm not sure it's up to KK yet.
Sent from my LG-LS970 using XDA Premium 4 mobile app
engine95 said:
I prefer TWRP just because that has always been our best one since the beginning. Now that all the versions of the OG are coming together though both are fine.
I like stock, but Lrod's OpTimuS 5.0 is my daily. The G2 adds he made got me hooked.
If your gonna try to pull some stuff from DE, check with Lrod. He's made alot of changes to a lot of files making it difficult. For me at least.
I've ran all the KK Roms and I liked them all. PSX is probably my favorite though. I liked Liquid in its early days, pre KK. I'm not sure it's up to KK yet.
Sent from my LG-LS970 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Again, I think you're right on all fronts. Liquid was smooth(heh) but it hasn't been long since we received an official 4.3 so I don't think they're up to 4.4. And same goes for the G2 apps, sometimes it's as simple as pulling an apk out of a zip and pushing it to system/apps and changing permissions but I think Lrod did a lot of work to get the G2 apps working on our phone because they required certain dependencies/modified frameworks.
engine95 said:
Let your phone update before rooting and unlocking. You should end up with ZVC.
Then, you have a choice on rooting. @HPTesla will say Framaroot. I'd say use fiddy Universal root.
Then DL FreeGee from the Playstore, use the"mako" version of TWRP/CWM, your choice, I'd do with TWRP and you'll be unlocked.
Back it up in recovery and you'll be good to go.
Sent from my LG-LS970 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Okay so I rooted it through fiddys universal root but when I try to go on to FreeGee it just doesnt want to open for me? Ive tryed a lot of times and I get nothing it will either send me to the playstore to an app called busy box or will sometimes restart my phone, Im confised I have no clue what to do? I tryed to uninstall and reinstall and nothing I installed the busybox app but it said I didnt have root permission or there was a problem getting the root or something like that.
Penley94 said:
Okay so I rooted it through fiddys universal root but when I try to go on to FreeGee it just doesnt want to open for me? Ive tryed a lot of times and I get nothing it will either send me to the playstore to an app called busy box or will sometimes restart my phone, Im confised I have no clue what to do? I tryed to uninstall and reinstall and nothing I installed the busybox app but it said I didnt have root permission or there was a problem getting the root or something like that.
Click to expand...
Click to collapse
You have to root before unlocking.
Make sure your phone has at least 70 percent charge or more!!
Go to Settings: Settings>Security>Unknown sources checked: Settings>Developer Options>USB Debugging checked, Settings> Display>Screen Timeout - at least 5 min
from fiddy thread.
Directions
1. Unzip the zip file
2. Make sure USB Debugging is on, and you are in Charge only Mode
3. Run the CurrentRoot.bat, wait for the prompt. (Can now be run as admin if you wish, Still works running as regular user tho. Thanks robisodd)
4. Change to MTP Mode
5. Just ignore when your computer asks how to view files on your device.
6. Press enter in the CMD prompt to continue.
7. Done.
You shouldn't have any issues.
If you do, then try Framaroot. http://forum.xda-developers.com/showthread.php?t=2130276 and follow those directions.
Follow this. http://forum.xda-developers.com/showthread.php?t=2050582 It has all the info on rooting and unlocking
Edit. You may have to root as admin/not admin, try both.
Edit #2 Also, do not use USB 3.0 ports. They are iffy for this stuff. LGNPST included
engine95 said:
You have to root before unlocking.
Make sure your phone has at least 70 percent charge or more!!
Go to Settings: Settings>Security>Unknown sources checked: Settings>Developer Options>USB Debugging checked, Settings> Display>Screen Timeout - at least 5 min
from fiddy thread.
Directions
1. Unzip the zip file
2. Make sure USB Debugging is on, and you are in Charge only Mode
3. Run the CurrentRoot.bat, wait for the prompt. (Can now be run as admin if you wish, Still works running as regular user tho. Thanks robisodd)
4. Change to MTP Mode
5. Just ignore when your computer asks how to view files on your device.
6. Press enter in the CMD prompt to continue.
7. Done.
You shouldn't have any issues.
If you do, then try Framaroot. http://forum.xda-developers.com/showthread.php?t=2130276 and follow those directions.
Follow this. http://forum.xda-developers.com/showthread.php?t=2050582 It has all the info on rooting and unlocking
Edit. You may have to root as admin/not admin, try both.
Edit #2 Also, do not use USB 3.0 ports. They are iffy for this stuff. LGNPST included
Click to expand...
Click to collapse
Okay i will try this later when i have access to a computer, but the last root i tryed told me it was successful although it didnt restart my phone or anything it just said it was in the command prompt. I will try again cause i dont think it did anything. But i have a question about roms, i am most likely going to flash the DE 5.0 again because i like it with the g2 keyboard and i kind of like the lg feel to it but the only problem is google play music always gives me an error when im playing songs and it always has. I heard aosp roms dont have that problen so in your opinion what is the most stable aosp rom with all features working like gps and everything??
Penley94 said:
Okay i will try this later when i have access to a computer, but the last root i tryed told me it was successful although it didnt restart my phone or anything it just said it was in the command prompt. I will try again cause i dont think it did anything. But i have a question about roms, i am most likely going to flash the DE 5.0 again because i like it with the g2 keyboard and i kind of like the lg feel to it but the only problem is google play music always gives me an error when im playing songs and it always has. I heard aosp roms dont have that problen so in your opinion what is the most stable aosp rom with all features working like gps and everything??
Click to expand...
Click to collapse
AOSP SuperNexus has been getting good reviews here in the forums but I haven't tried it yet. I would give that one a shot though. I'd flash GAPPS standard with it instead of GAPPS core as well. This is just generally speaking with any of the AOSP roms.
The directions @engine95 gave you for fiddy are spot on(as usual ), specifically having the phone in charge only mode instead of mtp. I think a lot of people have missed that step and it won't work in mtp. Using usb 2.0 is another good tip.
And if your phone didn't reboot, you probably arent rooted. Easiest way to check that you are rooted is by going into the app drawer and seeing either Superuser or SuperSu app. If it's there, you're rooted, if not, it didnt work. If it said it worked but didnt reboot, Im assuming you rebooted manually? It sounds silly but sometimes it's as simple as that. But again, after rebooting if one of those apps arent there, you are not rooted.
EDIT: I've never tried rooting with fiddy without being in charge only mode, Im wondering if being in mtp may install supersu/superuser app but not the binary? Probably not but I could be wrong. Just wondering if there is any possible way that the app could be there but you still wouldn't have root privileges. For me, if the app is there, I'm rooted but I don't pretend to know everything(far from it, lol).
EDIT#2: Once you are rooted and recovery is installed, here is the link to SuperNexus.
EDIT#3: And I can't stress this one enough....after rooting and unlocking the bootloader, before flashing ANYTHING, make a full backup of your stock AND copy the TWRP folder(with your backup in it) to a computer, JUST IN CASE! That way you will always have a backup elsewhere, even if something goes wrong with your phone's internal storage. Better safe than sorry!!! And it's also best to copy the entire TWRP folder.
@HPTesla You're on a roll!
Go with everything he's said.
I don't use Google music ,so I'm of little help there.
Almost every ROM has its quirks, and it's just a matter of finding the one that does what you need/want.
Our devs have given us a lot of options. And I know, I sure appreciate them.
Sent from my LG-LS970 using XDA Premium 4 mobile app
Penley94 said:
so yesterday i installed the new optimus de rom and it started up fine and everything was okay, then today i realized my 3g wasnt working and usually thats no big deal because all i have to do is restore my efs in the app FreeG (I think thats what its called, I might be wrong). Well right after i did that, i hit restart phone and it turned off then wouldnt come back on. Then i finally got to the LG symbol but it will turn off then the screen will be on but will just show black. I cant boot in to recovery nor can i do anything on it at all, when i plug it in the charger it says "battery.png is missing, battery: 75%". I took my phone in to sprint and they did a reset although that didnt do anything so there sending me a new one. Now my question is, is there any way I can open up my phones folder so i can get my pictures and everything that was on it? My pics were very important to me and i dont want to lose them, thats all i need so if some could help me get them that would be much appreciated, thanks.
Click to expand...
Click to collapse
I ran OpTiMuS for a long time and every time I would try new roms, decide I didn't like or whatever and go back, I'd always have to 1. Dial ##72786# 2. Let it self activate sometimes twice, but usually just once before I would pick up 3g/4g. May have just been my phone but you may try that out if you go back to optimus De. Over all, my favorite stock like rom though.
Sent from my Optimus G using XDA Premium 4 mobile app
OK. I think I've done my due diligence. I've scrubbed the forums for 2 days, I've googled it and I still can't figure out what I'm doing wrong.
Friend gives me this rooted LG OGP. Awsome! Works great! Then AT&T or LG sends an OTA update that bricks it :crying:. Read Aryan1312's sticky thread in this forum and get all pieces together. By now I have the 3.8.1 drivers AND the newest 3.10.1 drivers, LGFlashTool 1.8.1.1023, along with the newest 10P TOT file. I got the Flashtool to stop asking for PW and I think I'm ready to go.
But then . . . Plug my phone in and Device Management doesn't know what to do with phone. Reinstall drivers pack from LG website. Still no dice. Hmm. Phone is in Team Win Recovery Project v2.6.3.0 recovery screen (I guess that's what it's called) and computer doesn't know what to make of it. Hmm.
Maybe I can put it onto a microSD card and copy stuff over to phone? Maybe flash a different ROM through TWRP? Let's try that. I copy files over to the external SD card, put it into the phone, restart phone, hello TWRP, Advanced-File Manager option, WHY CAN'T YOU SEE THE EXTERNAL SDCARD??? Isn't it supposed to be there under /extSD?? It's time to ask for help.
Question: How do I get my Win7 PC to see the phone as a removable drive/external drive/whatever you call it so that I can get this info over?
I know that I have to change Port #'s after Win7 sees the phone. I just can't get there . . . yet.
- What I've tried:
Reinstalled drivers (both versions) and restarted between trying to plug phone in.
Tried installing phone drivers manually. Still doesn't mount as external HD as far as Win7 is concerned.
Called friend to ask his opinion. He doesn't remember and tries to tell me this is why Apple is "better".
Scoured the web to see what to do. Found articles about this same thing happening and all point to Stickied Post on this XDA forum
I did RTFM and am still lost.
---- Sorry for the long post, I just thought that people who wouldn't mind helping would appreciate the extra info.
Drivers
landran said:
OK. I think I've done my due diligence. I've scrubbed the forums for 2 days, I've googled it and I still can't figure out what I'm doing wrong.
Friend gives me this rooted LG OGP. Awsome! Works great! Then AT&T or LG sends an OTA update that bricks it :crying:. Read Aryan1312's sticky thread in this forum and get all pieces together. By now I have the 3.8.1 drivers AND the newest 3.10.1 drivers, LGFlashTool 1.8.1.1023, along with the newest 10P TOT file. I got the Flashtool to stop asking for PW and I think I'm ready to go.
But then . . . Plug my phone in and Device Management doesn't know what to do with phone. Reinstall drivers pack from LG website. Still no dice. Hmm. Phone is in Team Win Recovery Project v2.6.3.0 recovery screen (I guess that's what it's called) and computer doesn't know what to make of it. Hmm.
Maybe I can put it onto a microSD card and copy stuff over to phone? Maybe flash a different ROM through TWRP? Let's try that. I copy files over to the external SD card, put it into the phone, restart phone, hello TWRP, Advanced-File Manager option, WHY CAN'T YOU SEE THE EXTERNAL SDCARD??? Isn't it supposed to be there under /extSD?? It's time to ask for help.
Question: How do I get my Win7 PC to see the phone as a removable drive/external drive/whatever you call it so that I can get this info over?
I know that I have to change Port #'s after Win7 sees the phone. I just can't get there . . . yet.
- What I've tried:
Reinstalled drivers (both versions) and restarted between trying to plug phone in.
Tried installing phone drivers manually. Still doesn't mount as external HD as far as Win7 is concerned.
Called friend to ask his opinion. He doesn't remember and tries to tell me this is why Apple is "better".
Scoured the web to see what to do. Found articles about this same thing happening and all point to Stickied Post on this XDA forum
I did RTFM and am still lost.
---- Sorry for the long post, I just thought that people who wouldn't mind helping would appreciate the extra info.
Click to expand...
Click to collapse
1. Is the first pic with the phone connected to the pc?
2. If yes, have you tried to manually update drivers, while in device manager
3. I know that this is going to sound funny but have you tried a different USB port. The reason I ask is I had the same problem LG Optimus M and the phone was down for a couple of days. I tried everything and was about to call it quits but for some reason when I changed USB port the computer saw the phone and I was back in business. I am not saying that will 100% work but it is worth a try.
TheMighyLoki said:
1. Is the first pic with the phone connected to the pc?
2. If yes, have you tried to manually update drivers, while in device manager
3. I know that this is going to sound funny but have you tried a different USB port. The reason I ask is I had the same problem LG Optimus M and the phone was down for a couple of days. I tried everything and was about to call it quits but for some reason when I changed USB port the computer saw the phone and I was back in business. I am not saying that will 100% work but it is worth a try.
Click to expand...
Click to collapse
Yes I have. I think I did figure it out though. I put the device into "download mode" and my computer could see, and communicate, the phone.
To put my phone into "download mode" I did the following:
I connected the phone to the computer physically with USB cable
I turned phone off.
I pressed BOTH volume buttons and held the power button while phone was attached to computer.
With BOTH volume buttons still pressed, I released the power button.
The phone screen was black with a little dialog box in the middle saying "download mode"
I could then use LGFlash Tools to flash Stock AT&T TOT file back into phone. Took 519 seconds to complete the stock flash.
New problem arises, After flash, I do NOT have any 3G/4G signal. I can use the phone to make and receive phone calls and text messages, but I CANNOT use mobile internet unless I have it connected via wifi.
I installed the Debloated ROM and "tried" to flash 980 Baseband.zip but when I tried to install baseband, CWM gave me a permission error and said install failed. I haven't been able to use mobile internet since. Any help???
-- Again, sorry for the lengthy post. I figured that I might not be the only person who has gone through this. I see a lot of viewers to the thread so I think other people might be having same troubles as me.
landran said:
New problem arises, After flash, I do NOT have any 3G/4G signal. I can use the phone to make and receive phone calls and text messages, but I CANNOT use mobile internet unless I have it connected via wifi.
I installed the Debloated ROM and "tried" to flash 980 Baseband.zip but when I tried to install baseband, CWM gave me a permission error and said install failed. I haven't been able to use mobile internet since. Any help???
-- Again, sorry for the lengthy post. I figured that I might not be the only person who has gone through this. I see a lot of viewers to the thread so I think other people might be having same troubles as me.
Click to expand...
Click to collapse
It sound like you need to manually set the APN. Do a Search for your provider.. ie AT&T T-Mobile the setting is under Network/Tethering & Networks/ Mobile networks/ Access point name/ Hit Menu Button and New APN
You are the MAN / WOMAN!! Thanks for the help. That fixed it.
For posterity and to help another "noob" stuck in my case later (maybe months down the line)
This is what I've done up until now in plain text:
Used LGFlashtool to flash AT&T stock "10k" build
Went into Settings Icon>General>Developer Options>check off "USB Debugging"
Used "E980 Universal Root" from forums to gain Root access (verified with "Root Checker" from Playstore)
Used FreeGee to get TWRP recovery installed (rebooted into recovery with "QuickReboot" from Playstore).
Used TWRP recovery to install "E980 Baseband.zip" from forums
Factory Reset
Setup new phone and input APN settings (located in Settings Icon>Networks>Tethering & Networks>Mobile networks>Access point names>Menu button "New APN"/input carrier values/Menu button "Save")
Now that I know how to get back here, I'm going to scrap the stock ROM and try to do this whole process with a custom ROM. . . and another flash-a-holic is born. The learning journey continues.
Welcome:beer:
*KCCO*2SHAYNEZ*E980*
That is what this forum is for.
I have been helped out a lot from the group and I just thought it was time to pay it back. It is good to hear that you got it up and running. But one last word of advise BACK UP, BACK UP, BACK UP, and when that is done, back up the back up to the computer.
My oneplus 3 keeps bootlooping into a md5 check and it shows this
ive already tried the mega unbrick guide but now the phone shows this when i plug it in
any help? please i just got this phone about 2 weeks ago
well this had happened to me too.
But the Mega Unbrick guide worked for me.
You sure following the instructions carefully?
Joyo-rocker said:
well this had happened to me too.
But the Mega Unbrick guide worked for me.
You sure following the instructions carefully?
Click to expand...
Click to collapse
yes sir, the drivers wont even install anymore idk what to do
shadowcreeper_1 said:
yes sir, the drivers wont even install anymore idk what to do
Click to expand...
Click to collapse
Keep trying, potentially on a different PC.
I also had some problems getting my OP3 recognized when it was soft bricked, MSM drivers wouldn't install.
Then by trying I got them to, and using that toolkit provided my OP was detected on some port, and download of the full image started. Then it was back to life.
If it turns on like in your case, I don't think it's dead, just soft bricked.
Feel free to book a remote support session with Oneplus directly, by hearing around it works quite well (you just have to wait a couple of business days to get a slot, at least it was like that for me)
Good luck!
shadowcreeper_1 said:
yes sir, the drivers wont even install anymore idk what to do
Click to expand...
Click to collapse
Follow the Method 2 of the Guide. Repeated attempts will surely end positively.
That happen to me when used lite version. Download full mega unbrick tool around 1gb in size and repeat flashing.
andrea.ippo said:
Keep trying, potentially on a different PC.
I also had some problems getting my OP3 recognized when it was soft bricked, MSM drivers wouldn't install.
Then by trying I got them to, and using that toolkit provided my OP was detected on some port, and download of the full image started. Then it was back to life.
If it turns on like in your case, I don't think it's dead, just soft bricked.
Feel free to book a remote support session with Oneplus directly, by hearing around it works quite well (you just have to wait a couple of business days to get a slot, at least it was like that for me)
Good luck!
Click to expand...
Click to collapse
Unfortunately oneplus support couldn't even make it live again, but I am going to try it on my laptop when I get home
Mod close please
shadowcreeper_1 said:
Mod close please
Click to expand...
Click to collapse
I hope that you solved your issue. In that case, don't you think that it will be helpful for anyone searching later, to explicitly state what you did to solve the issue? I think that courtesy to other users demands that.
Follow method 2 of the mega unbrick guide. That's what I did to get my OP3 completely back to stock.
andrea.ippo said:
Keep trying, potentially on a different PC.
I also had some problems getting my OP3 recognized when it was soft bricked, MSM drivers wouldn't install.
Then by trying I got them to, and using that toolkit provided my OP was detected on some port, and download of the full image started. Then it was back to life.
If it turns on like in your case, I don't think it's dead, just soft bricked.
Feel free to book a remote support session with Oneplus directly, by hearing around it works quite well (you just have to wait a couple of business days to get a slot, at least it was like that for me)
Good luck!
Click to expand...
Click to collapse
This solved my issue, tried it on my laptop with a fresh install of Windows 10 (since I had a Linux distribution installed on it) and I just installed the drivers needed and followed the steps in method 2 of the mega u brick guide
Greetings,
General
I've been all over the Internet trying to gain access to more information about how to repair my LG G4. Well... Let's start from the beginning.
Story
I have an LG G4, it's old and I've had it for over 4-5 years now... I can't exactly remember how long I had it for. It still works, just needs a new battery and cable (cats chewed the cable and batteries don't last when you forget to disconnect them from the device, leave it plugged in for weeks and let it completely die for longer then a week).
I recently saw a video about the Pine phone and the fact that it was able to run a linux mobile distribution and when I looked into installing a custom OS into LG G4, it was possible... If I manually ported it myself.
I actually got fairly far using my Xubuntu system with configuring and compiling, the trouble I ran into was that I couldn't root or fastboot my device.
So, now here's where the problem began, I have a LG G4 factory reset and when I load up the Recovery mode, it brings up the android guy with their chest open and an exclamation mark in a yellow triangle, no message. After attempting to boot into recovery mode, I wait a little while and the phone automatically resets back to normal. When I use ADB to force the phone into fast boot, it skips it and starts the phone normally.
Now I'm on a mission to find a way to either fix the boot or flash the firmware (in hopes that it fixes the boot/recovery).
I have already tried:
Installing LGFlashTool
Versions, 2.0.1.6, 2.0.1.9, Year: 2014 and 2.0.2.5. Other than year 2014, the other ones were installed from LGFlashTool.com
Since Xubuntu can't run these files properly, I just ran them on my wife's Windows computer
I installed the LG Mobile Drivers and LGFlashTool had registered that it was the correct DLL but, it didn't seem to find the phone
Year 2014 LGFlashTool had found the phone but, I may have had the incorrect kdz file.
The Flash starts and the phone goes to firmware update, but the phone stops at zero and sits there while the program crashes saying that there was an error (in which no means to read, understand or locate the description of this error) and to try again by unplugging and removing the battery.
This version was downloaded from xda-developers.com
Conclusion
Once I can get into fastboot, I'll be able to root my phone and attempt to install the mobile OS I have ready.
Otherwise, I think I might be able to install a microSD card with the OS but, I don't think that will work if I can't get into the option to boot from a separate location (I believe that's called fastboot). But, then again... I think the phone needs to be rooted first... Then that brings me to the previous issue.
Details and Information
The phone details (as far as I see) are:
When I remove the battery I can see:
FCC ID: ZMFH810
IC ID: 2703C-H812
Model Number: LG-H812
I'm not exactly sure what KDZ file I got but the name is: PR H810PR10a_02.kdz, I also have the _04.kdz
I'm using H815 as my compile for the mobile OS, I may switch to H810 when I get back to that point.
Useless information: I still have the original leather backing... Removed from the phone because I didn't like it. If I find it, I can ship it to someone.
That's about it... I am very terrible about research and using Google properly (I have no idea why, I think it's a terrible flaw to have but, I have it). So, if you find the solution by typing words I didn't use or finding a similar post, I am very sorry. Hope I have everything posted here to help solve the issue, linking to posts that can resolve the issue or posting questions on what I might be missing will help.
Thanks in advance for the support of this community,
Lilrock
Lilrock said:
Greetings,
General
I've been all over the Internet trying to gain access to more information about how to repair my LG G4. Well... Let's start from the beginning.
Story
I have an LG G4, it's old and I've had it for over 4-5 years now... I can't exactly remember how long I had it for. It still works, just needs a new battery and cable (cats chewed the cable and batteries don't last when you forget to disconnect them from the device, leave it plugged in for weeks and let it completely die for longer then a week).
I recently saw a video about the Pine phone and the fact that it was able to run a linux mobile distribution and when I looked into installing a custom OS into LG G4, it was possible... If I manually ported it myself.
I actually got fairly far using my Xubuntu system with configuring and compiling, the trouble I ran into was that I couldn't root or fastboot my device.
So, now here's where the problem began, I have a LG G4 factory reset and when I load up the Recovery mode, it brings up the android guy with their chest open and an exclamation mark in a yellow triangle, no message. After attempting to boot into recovery mode, I wait a little while and the phone automatically resets back to normal. When I use ADB to force the phone into fast boot, it skips it and starts the phone normally.
Now I'm on a mission to find a way to either fix the boot or flash the firmware (in hopes that it fixes the boot/recovery).
I have already tried:
Installing LGFlashTool
Versions, 2.0.1.6, 2.0.1.9, Year: 2014 and 2.0.2.5. Other than year 2014, the other ones were installed from LGFlashTool.com
Since Xubuntu can't run these files properly, I just ran them on my wife's Windows computer
I installed the LG Mobile Drivers and LGFlashTool had registered that it was the correct DLL but, it didn't seem to find the phone
Year 2014 LGFlashTool had found the phone but, I may have had the incorrect kdz file.
The Flash starts and the phone goes to firmware update, but the phone stops at zero and sits there while the program crashes saying that there was an error (in which no means to read, understand or locate the description of this error) and to try again by unplugging and removing the battery.
This version was downloaded from xda-developers.com
Conclusion
Once I can get into fastboot, I'll be able to root my phone and attempt to install the mobile OS I have ready.
Otherwise, I think I might be able to install a microSD card with the OS but, I don't think that will work if I can't get into the option to boot from a separate location (I believe that's called fastboot). But, then again... I think the phone needs to be rooted first... Then that brings me to the previous issue.
Details and Information
The phone details (as far as I see) are:
When I remove the battery I can see:
FCC ID: ZMFH810
IC ID: 2703C-H812
Model Number: LG-H812
I'm not exactly sure what KDZ file I got but the name is: PR H810PR10a_02.kdz, I also have the _04.kdz
I'm using H815 as my compile for the mobile OS, I may switch to H810 when I get back to that point.
Useless information: I still have the original leather backing... Removed from the phone because I didn't like it. If I find it, I can ship it to someone.
That's about it... I am very terrible about research and using Google properly (I have no idea why, I think it's a terrible flaw to have but, I have it). So, if you find the solution by typing words I didn't use or finding a similar post, I am very sorry. Hope I have everything posted here to help solve the issue, linking to posts that can resolve the issue or posting questions on what I might be missing will help.
Thanks in advance for the support of this community,
Lilrock
Click to expand...
Click to collapse
Well first of all you need to unlock your phone. H812 can't be unlocked officially though. Check my sig for the only unofficial one. Once unlocked you can flash custom ROMs but first of all you should read about ARB (antirollback) also in my sig and ensure you understand the risks all this brings. Gl.
steadfasterX said:
Well first of all you need to unlock your phone. H812 can't be unlocked officially though. Check my sig for the only unofficial one. Once unlocked you can flash custom ROMs but first of all you should read about ARB (antirollback) also in my sig and ensure you understand the risks all this brings. Gl.
Click to expand...
Click to collapse
Thanks for the positive feedback, I will attempt to fix my phone with your solution. This phone is technically almost garbage and when I fully update the phone, it runs like trash. So, if I can install a custom ROM, it may run a little better or have the tools I would personally like in a phone.
I'll let you know the details of my attempt,
Lilrock
You might be able to use:
GitHub - Lekensteyn/lglaf: LG Download Mode utility and documentation
LG Download Mode utility and documentation. Contribute to Lekensteyn/lglaf development by creating an account on GitHub.
github.com
It is more reliable then the factory tools when it works.
SkewedZeppelin said:
You might be able to use:
GitHub - Lekensteyn/lglaf: LG Download Mode utility and documentation
LG Download Mode utility and documentation. Contribute to Lekensteyn/lglaf development by creating an account on GitHub.
github.com
It is more reliable then the factory tools when it works.
Click to expand...
Click to collapse
Which is included in mAid (https://maid.binbash.rocks).. ... Even with a UI...
Thank you very much with your support. I was able to unlock, bootloader and install the image installer.
I'm on the verge of compiling and installing Ubuntu Touch on my LG G4 H812.
Hope you guys proceed with everything you're doing right!