Related
Amazon.com: RINGKE FUSION® Google Nexus 5 Case Bumper [BLACK] The Best Selling Shock Absorption Bumper + Anti Scratch Clear Back Panel + Design It Yourself Premium Hybrid Hard Case [Eco/DIY Package] for Google Nexus 5
I just got this case in today and so far I really like it. It is a slim case with a clear back, be sure to remove the plastic covers on both the back and front of the clear back. The fitment is great, there is cut outs for the usb, speaker/mic and headphone jack. The cut outs alignment is perfect. The back is crystal clear and I can see my white Nexus really well. This case also comes with a hard plastic template that you can use to make cut outs and place inside the case to give you a custom look. I don't think I will be making my own cut outs just now because I'm enjoying the white Nexus logo. The power and volume buttons are flush with the case and depress nicely. The buttons are not ultra sensitive like some cases, they have a nice pressure to them.
Packaging
Speaker/mic and USB port cutouts
Headphone jack and volume buttons
Side profile, the case does not add very much bulk at all
Fitment is spot on
Crystal clear back
Looking at the audio port and usb area cutout, can you see a gap between the phone and the case there? I just noticed the Spigen Ultra Hybrid has a gap where dust can get in...
RayLancer said:
Looking at the audio port and usb area cutout, can you see a gap between the phone and the case there? I just noticed the Spigen Ultra Hybrid has a gap where dust can get in...
Click to expand...
Click to collapse
Yes there is a small gap around the back side of the audio jack. There is a even smaller gap on the backside of the USB port. I wonder how this will effect the case over time?
grndc2gsr said:
Yes there is a small gap around the back side of the audio jack. There is a even smaller gap on the backside of the USB port. I wonder how this will effect the case over time?
Click to expand...
Click to collapse
Got one and I'm not a fan so far. The part where the side of the case meets the raised lip to protect the screen (lay on face design) has a REALLY sharp edge to it all around the perimeter. I don't know if it is just leftover material from the mold (flash) or what. Have you noticed the same on your case?
I know a few folks on Amazon have mentioned it in the reviews. Do you have the same issue?
I emailed Ringke yesterday but I haven't heard back. I really like the case except that it is just so uncomfortable to hold with that sharp edge as it is now.
Dudeist Priest said:
Got one and I'm not a fan so far. The part where the side of the case meets the raised lip to protect the screen (lay on face design) has a REALLY sharp edge to it all around the perimeter. I don't know if it is just leftover material from the mold (flash) or what. Have you noticed the same on your case?
I know a few folks on Amazon have mentioned it in the reviews. Do you have the same issue?
I emailed Ringke yesterday but I haven't heard back. I really like the case except that it is just so uncomfortable to hold with that sharp edge as it is now.
Click to expand...
Click to collapse
I don't have the same issue on mine. It has a nice beveled edge on it, not sharp at all.
This case has been working out nice for me. I'm not going to use my Spigen Slim Armor any more, it's just too bulky for my taste.
looks like it's a tight fit for big 3.5mm jacks or ones with L plugs?
tontiv said:
looks like it's a tight fit for big 3.5mm jacks or ones with L plugs?
Click to expand...
Click to collapse
Yuu are correct. I tested the case with a pair of Sony MDRV6 and they headphone plug would not fit unless I massed it in.
grndc2gsr said:
Side profile, the case does not add very much bulk at all
Click to expand...
Click to collapse
Is it just me or do the volume buttons look crooked?
I got mine a few days ago and I looked at my own and I can definately say it looks crooked...
Works great don't get me wrong... just...
grndc2gsr said:
Amazon.com: RINGKE FUSION® Google Nexus 5 Case Bumper [BLACK] The Best Selling Shock Absorption Bumper + Anti Scratch Clear Back Panel + Design It Yourself Premium Hybrid Hard Case [Eco/DIY Package] for Google Nexus 5
I just got this case in today and so far I really like it. It is a slim case with a clear back, be sure to remove the plastic covers on both the back and front of the clear back. The fitment is great, there is cut outs for the usb, speaker/mic and headphone jack. The cut outs alignment is perfect. The back is crystal clear and I can see my white Nexus really well. This case also comes with a hard plastic template that you can use to make cut outs and place inside the case to give you a custom look. I don't think I will be making my own cut outs just now because I'm enjoying the white Nexus logo. The power and volume buttons are flush with the case and depress nicely. The buttons are not ultra sensitive like some cases, they have a nice pressure to them.
---------------------
My Ringke Fusion case has come in, so I've taken the liberty to create a rough template for anyone who wants to open a photo editor program like photoship or paint.net to fit their image before cutting it out. This might be a fraction of a milimeter off but I placed the clear cut out on my monitor and cropped it as tight as I could from what I saw on screen.
** Note my image is square, use it to create the general shape of your image and the included template to trace inside of it before cutting it out
Grab the png picture below -- is flat w/ colors but can create layers by color select in any respectable photo editor. I'm uncertain of the placement of the nexus logo but tried to center it on the back and crop a photo i had to fit (?)
http://www.flickr.com/photos/[email protected]/10771644276/
Click to expand...
Click to collapse
Already ordered mine too, it looks cool.
Is any1 of u going to design custom backs? I really like the idea of being able to..
Which screen protector you used?
Does this kind of case is compatible with Qi and wireless charging?
Rufufu said:
Does this kind of case is compatible with Qi and wireless charging?
Click to expand...
Click to collapse
Yes, It works great with the Nokia DT-900
Amazon.com: Nokia DT-900 Wireless Charging Plate - Retail Packaging - Black
Just got received it in the mail today and it is a really nice case. It's thinner than I expected, as the one for the N4 felt a lot thicker. The buttons work flawlessly and the case fits very firmly to the device. I plan to play around with the template for custom covers later today. I prefer this case over the Spigen case because of the buttons mimic the actual phone versus the block buttons. The Ringke Fusion case is a definite buy...
Got the Ringke Fusion since yesterday.
I can compare the Spigen Ultra hybrid und the Fusion, as I have them both.
Pros:
Fits good, the cut outs are perfect. It's slimmer than the Ultra.
The buttons can be used like on the naked N5, same feedback, not that sharp edges though (better imo).
The material of the Fusion feels a bit smoother than that of the Ultra, the front edges are a little bit sharper.
The clear back seems to be a bit harder and more scratch resistant (until now).
Cons:
The Fusion fixes not the rattling power button.
The quality seems not that good, there are some spots, which seem to be bad glued (or whatever treated) between the bumper and the back.
The N5 feels not that good protected like in the Spigen (which is softer and bulkier).
Conclusion:
I like the Fusion more than the Ultra because of the buttons and its slimness.
NuxMortis said:
Got the Ringke Fusion since yesterday.
I can compare the Spigen Ultra hybrid und the Fusion, as I have them both.
Pros:
Fits good, the cut outs are perfect. It's slimmer than the Ultra.
The buttons can be used like on the naked N5, same feedback, not that sharp edges though (better imo).
The material of the Fusion feels a bit smoother than that of the Ultra, the front edges are a little bit sharper.
The clear back seems to be a bit harder and more scratch resistant (until now).
Cons:
The Fusion fixes not the rattling power button.
The quality seems not that good, there are some spots, which seem to be bad glued (or whatever treated) between the bumper and the back.
The N5 feels not that good protected like in the Spigen (which is softer and bulkier).
Conclusion:
I like the Fusion more than the Ultra because of the buttons and its slimness.
Click to expand...
Click to collapse
AGREED! The Spigen is not as nice in hand, it is a slightly harder composite. I also like the buttons on the Ringke version better. It is hard to find the buttons on the Spigen, since they are flush. I also like the slight back curvature of the Ringke better, whereas the Spigen is flat.
I will however say that if debugging is on, the Ringke activates the power button bug capture feature much more often than the Spigen. In all however, I choose the Ringke over the Spigen.
NuxMortis said:
Got the Ringke Fusion since yesterday.
I can compare the Spigen Ultra hybrid und the Fusion, as I have them both.
Pros:
Fits good, the cut outs are perfect. It's slimmer than the Ultra.
The buttons can be used like on the naked N5, same feedback, not that sharp edges though (better imo).
The material of the Fusion feels a bit smoother than that of the Ultra, the front edges are a little bit sharper.
The clear back seems to be a bit harder and more scratch resistant (until now).
Cons:
The Fusion fixes not the rattling power button.
The quality seems not that good, there are some spots, which seem to be bad glued (or whatever treated) between the bumper and the back.
The N5 feels not that good protected like in the Spigen (which is softer and bulkier).
Conclusion:
I like the Fusion more than the Ultra because of the buttons and its slimness.
Click to expand...
Click to collapse
Thanks for the comparison. Would there by any way you could take similarly positioned photos of each of the cases? Is the black rim around transparent window on the back of the case comparable in size between the two? In other words is the window larger on one or the other?
---------- Post added at 11:49 PM ---------- Previous post was at 11:48 PM ----------
GSLEON3 said:
AGREED! The Spigen is not as nice in hand, it is a slightly harder composite. I also like the buttons on the Ringke version better. It is hard to find the buttons on the Spigen, since they are flush. I also like the slight back curvature of the Ringke better, whereas the Spigen is flat.
I will however say that if debugging is on, the Ringke activates the power button bug capture feature much more often than the Spigen. In all however, I choose the Ringke over the Spigen.
Click to expand...
Click to collapse
If the Ringke is slightly curved, can you rock it back and forth when placed on a flat surface?
floepie said:
Thanks for the comparison. Would there by any way you could take similarly positioned photos of each of the cases? Is the black rim around transparent window on the back of the case comparable in size between the two? In other words is the window larger on one or the other?
---------- Post added at 11:49 PM ---------- Previous post was at 11:48 PM ----------
If the Ringke is slightly curved, can you rock it back and forth when placed on a flat surface?
Click to expand...
Click to collapse
No, the clear back isn't curved, the black bumper is beveled where it meets the clear back. It's actually a really nice and smooth join if two different materials. Additionally, there are little nubs or feet at the corners, so when you lay it face-up on a surface, the clear back doesn't touch.
Over all, the build quality is very impressive, the cut outs are perfect, and the buttons feel just like a naked phone, except for a gentle rebound, which feels like an improvement.
Sent from my Nexus 5 using xda app-developers app
Wonder how wide the audio jack hole is?
I have audiotechnica m50's and the 3.5mm jack is a wider design one. I have the Spigen Ultra and it's way too small to accommodate the headphone jack.
It's the one on the left: http://farm9.staticflickr.com/8200/8218246616_5ae52c9b98_b.jpg (1/8 of an inch)
Acase Superleggera Pro
vs
Spigen Slim Armor
For Nexus 5
Prologue:
Going to have a good ol' fashion case off here for the Nexus 5. At first I was excited, thinking that I would actually take measurements and pictures, but then I remembered that I'm too lazy for that kind of stuff. Therefore, this will only be a personal comparison with color-codie goodness. A little warning that already I'm biased towards Acase because I've used a superleggera pro for my iPhone 4s (never going back to Apple) and after two years of dropping, that phone looks like its brand new (with loads of finger prints :good: ). Besides the protection, I also just love the smooth feel of matte...
Summary:
Both cases have their advantages, but personally I went with Acase.
Main Points:
If you didn't know, both of these cases are supposedly dual-layered cases. This means that these cases have two pieces to their design. Whether that actually adds to the protection and shock absorption or not, I have no idea. What I do know is that psychologically, I feel like my phone has better protection.
Superleggera Pro:
Silicone Case with a Poly-carbonate shell
Nice smooth feel but super slippery.
Example: Case face down, back up. Try to slide your hand against the back. Barely any friction or resistance when sliding my hand across.
Good enough lift in the back to protect the camera but no extra corner stands like the Slim Armor for airflow. Great lift in the front as well.
[*]Clicky feedback when pressing volume and power buttons. You can press the power button without accidently pressing the volume buttons too.
(Note: See Slim Armor main points for details)
A little Acase branding on the bottom of the back of the case.
Slim Armor:
Hard TPU with a Poly-carbonate Shell
Nice smooth feel, making it a little slippery but not too slippery.
Example: Case face down, back up. Try to slide your hand against the back. I felt resistance from my hand sticking to the case.
[*]Nice lift in the back for airflow and nice lift in the front to protect the screen.
[*]Buttons lose their clicky feedback. Big problem for me. Also had some occasional issues with locking the screen since the amount of force needed to press the power button makes you also press the volume buttons if you have your finger there.
Spigen branding on the lower part of the back of the case and on the right side. Looks cooler than the Acase branding but who cares really.
Review:
To me. dual-layer means two different layers put together to make one great case. With the Slim Armor, I was expecting silicone plus the poly-carbonate like the Acase I was already used to. As far as silicon vs hard tpu for the base part of the case, I haven't read or seen anything that sets a clear winner.
With the positioning of the second layer of poly-carbonate Acase wins here. I mean when I drop my phone it hits the corners or at least near the corners more often than it lands perfectly on its side. With the Slim Armor, the hard shell poly-carbonate pretty much just covers the side and the corners are covered only by the hard tpu. Spigen claims that there are "air-pockets" in those corners in their advertising but I don't know how effective these "air-pockets" are. Anyway, If I wanted hard tpu to protect my corners, I'd just get a hard tpu case. The Acase has all around dual-layering except for the buttons and cut-outs like the headphone slot. With the Acase I feel I'm getting the true dual-layered protection I'm looking for where both the hard shell and the silicone cover the corners for that added and padded protection.
Button feedback is another pet-peeve/preference for me. Acase, since its silicone, has perfect feedback. Easy to press down and you feel and hear that click. Spigen, no feedback...at all. Thanks to hard tpu, its hard to press your buttons down. Now I'm not saying that its impossible to press the button down but the resistance of hard tpu not only kills your clicky feedback but it also can make you squeeze your phone hard enough to press the volume at the same time as the power button.
Both cases pick up on finger prints pretty easily. The Acase can also pick up on dust, lint, etc with its silicone. Personally, I can put up with this for a better feeling case. After a little back and forth case swapping, I realized that the Acase has more lift than the Slim armor in the front Due to the thickness of the silicone at that point. The case also wraps around the edges more (something I liked) without making my screen protector peel up at the edges.
Both cases have plenty of space for the micro-usb and speaker cut-outs. However, with most cases there are issues with the headphone port. My tiny apple headphone jacks fit perfectly for both cases, however my bulky (1 cm diameter) speaker jack only fit with the Acase. Since the Acase uses stretchy silicone, I could push the headphone in at the expense of stretching the silicone a little. With the Slim Armor, there was no way to get it in without taking off the case at the top. (I will note that its easier to take the top part of the Slim Armor off than it is to take the Superleggera Pro)
Width and length are the same for both cases, however the Acase is slightly thicker. For me, this means more protection at the cost of a barely noticeable additional thickness. Both cases feel great in the hand, I just felt like the Superleggera Pro had more pro's and a better feel than the Slim Armor.
Edit:
Just got a chance to test the Acase with a wireless charger (CHOETECH Stadium) and it works! The charger isn't that special, so I'm going to assume that most chargers should work with the Acase. I still recommend you conduct your own research on wireless chargers and compare it to the CHOETECH so you can confirm that whatever you buy will work as well. I'm not supporting CHOETECH in any way, just stating the charger I used to test the ability to wirelessly charge through the Acase.
Well said!
I also own both cases, and will vouch for everything ximaginex said. Personally, I feel the Acase provides a better level of protection than the Slim Armor because it has both silicone & polycarbonate protecting the corners vs. just TPU. The Acase is thicker, but feels better in your hands and the button response feels like using the phone bare.
Pro Tip: If you wish to remove the branding on the Acase, borrow a cotton ball and a dab of nail polish remover from your girlfriend. Lightly rub the lettering and it should come right off.
Kennypete said:
Well said!
I also own both cases, and will vouch for everything ximaginex said. Personally, I feel the Acase provides a better level of protection than the Slim Armor because it has both silicone & polycarbonate protecting the corners vs. just TPU. The Acase is thicker, but feels better in your hands and the button response feels like using the phone bare.
Pro Tip: If you wish to remove the branding on the Acase, borrow a cotton ball and a dab of nail polish remover from your girlfriend. Lightly rub the lettering and it should come right off.
Click to expand...
Click to collapse
The had no idea about the removal technique, thanks. Not sure if I want to do it or not though. The branding is like a classy tramp stamp for my phone, but having it smooth and clean might be pretty nice too.
Sent from my Nexus 5
So can you guys post pictures?
Sent from my Nexus 5 using Tapatalk
Clicky Feedback on spigen
I've got 2 different revisions of the spigen slim armor. as you can see the only difference is the way the pads for the keys are attached. The one with only one connection on the top side have a very big ce "clicky" feedback, the other one is very difficult to press. So you could try to cut the bottom connection and see if it gets better.
I also got the Acase case. One thing that bothers me is that the inner silicon layer is too soft, I wish it was tpu instead. The bottom lift of the phone is not reinforced high enough by the hard plastic shell, making the inner layer too loose.
I'd love to see an owner's picture of the Acase. ☺
derju said:
I've got 2 different revisions of the spigen slim armor. as you can see the only difference is the way the pads for the keys are attached. The one with only one connection on the top side have a very big ce "clicky" feedback, the other one is very difficult to press. So you could try to cut the bottom connection and see if it gets better.
Click to expand...
Click to collapse
Thanks for pointing that this out. I'll consider trying this and report back if it works.
Can someone post a picture of the acase? Considering getting one
Sent from my Nexus 5 using Tapatalk
[/URL][/IMG] Here's a pic. I'll try to upload some more, with the nexus 5 in it.
Great review... But holy hell that was a lot of Comic Sans! That font always make me think of this picture.
Just got my Acase today and it is much thicker than I imagined it would be... But the bulkiness is kind of nice and the phone still feels great in hand so far. I ordered mine from CTCstore on Amazon and it was listed as Slim Superleggera PRO but my packaging only says Superleggera PRO... I emailed the vendor for clarification but am wondering if the op is referencing the slim version or regular, or if they are actually the sane thing.
Here's a picture of mine.
http://i.imgur.com/JnMmuwm.jpg
http://i.imgur.com/QjUjN3M.jpg
That white Superleggera case looks great! Thanks for posting the pictures. :thumbup:
ktamondo said:
Here's a pic. I'll try to upload some more, with the nexus 5 in it.
Click to expand...
Click to collapse
Broken picture.
GHOSTIVVI said:
Can someone post a picture of the acase? Considering getting one
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Have you seen the amazon pictures?
To me I thought that the spigen slim armor felt like a dollar store product. Its fits OK but is just hard and cheap feeling. The volume buttons were sorta hard to push. I absolutely love my acase.
Sent from my Nexus 5 using Tapatalk
Fixed the broken picture.
Terrible. The only place that carries this is Amazon.com and they won't ship to Canada.
Brutal. Just brutal.
Sent from my Nexus 5 using Tapatalk
derju said:
I've got 2 different revisions of the spigen slim armor. as you can see the only difference is the way the pads for the keys are attached. The one with only one connection on the top side have a very big ce "clicky" feedback, the other one is very difficult to press. So you could try to cut the bottom connection and see if it gets better.
Click to expand...
Click to collapse
Is the power button the same design (only connected on one side) on the new revision? Spigen allegedly sent me the revised TPU but my buttons look the same as the original design. I actually cannot tell the difference between my original one and the new one. I think Spigen might have messed up and sent me the original revision as a replacement.
To keep this on topic, I also have both cases as well. I actually liked the functionality of the Superleggera best (clicky buttons, corner coverage, etc) but to me the look and quality of materials of the spigen were significantly better than the superleggera. See I would have said the superleggera was the generic cheepo case and the spigen was the high end case. Just shows how widely peoples opinions can vary on two identical items.
Waiting for more pics from you!
---------- Post added at 12:01 PM ---------- Previous post was at 11:57 AM ----------
ktamondo said:
[/URL][/IMG] Here's a pic. I'll try to upload some more, with the nexus 5 in it.
Click to expand...
Click to collapse
Waiting for more pics of this red case!
What are some good cases for the phone?
I really like my Nillkin Natural TPU case. there are a couple of other threads with cases and pics.
that clear right? doesn't that interfere with flash when taking pictures?
Nilkin Frosted Shield case recommended.
http://www.ebay.com/itm/20134158223...49&var=500540193931&ssPageName=STRK:MEBIDX:IT
I have both of these cases as well, and they are both excellent choices. I wish the clear case was a tad thicker, but I like that my phone's back cover is viewable through the clear case (so pretty!) and it doesn't add extra bulk.
Unlike some silicon cases, it has a smooth finish that won't stick to your pocket (it also might slide out of your hand easily enough, if your hand is damp).
There is a cutout for the flash, so I've not noticed any issues with it. The covers for the headphone jack and usb connector are a nice touch as well, but the usb cover on mine seems to not want to sit completely flush. Not a huge deal to me, even with OCD.
I like that the clear case covers the bottom edge of the phone, whereas the matte case leaves it exposed. The bottom edge of my phone already seems to have some wear because of the exposure.
That said, I really do like the feel and color of the matte case (I have red), and it fits a little more snugly that the clear case, IMHO.
I'd like to see a heavier duty case, something like a Griffin Survivor style case with 2-part rubber and hard plastic component. Unfortunately for now, the Nillikin cases aren't going to afford your phone much more than scratch protection but they are nice to hold and are better than nothing! Definitely pair with a nice tempered glass screen protector, if you can find one that fits well, that is...
bgibson72 said:
I have both of these cases as well, and they are both excellent choices. I wish the clear case was a tad thicker, but I like that my phone's back cover is viewable through the clear case (so pretty!) and it doesn't add extra bulk.
Unlike some silicon cases, it has a smooth finish that won't stick to your pocket (it also might slide out of your hand easily enough, if your hand is damp).
There is a cutout for the flash, so I've not noticed any issues with it. The covers for the headphone jack and usb connector are a nice touch as well, but the usb cover on mine seems to not want to sit completely flush. Not a huge deal to me, even with OCD.
I like that the clear case covers the bottom edge of the phone, whereas the matte case leaves it exposed. The bottom edge of my phone already seems to have some wear because of the exposure.
That said, I really do like the feel and color of the matte case (I have red), and it fits a little more snugly that the clear case, IMHO.
I'd like to see a heavier duty case, something like a Griffin Survivor style case with 2-part rubber and hard plastic component. Unfortunately for now, the Nillikin cases aren't going to afford your phone much more than scratch protection but they are nice to hold and are better than nothing! Definitely pair with a nice tempered glass screen protector, if you can find one that fits well, that is...
Click to expand...
Click to collapse
Yeah, I'm waiting for a decent rubber-hard plastic case to come out for me to use. A cheaper one should hold till then.
nekrosoft13 said:
What are some good cases for the phone?
Click to expand...
Click to collapse
Window case relly a good choice!
The Rearth Ringke Fusion case is very good, fits well, I find it comfortable and of a durable material. Helps with the power button as the case plastic makes it pop out a bit and it can be pressed with a lot of ease.
Here is the link if you want to see it.
http://www.amazon.com/ASUS-ZenFone-5-5-Inch-Case/dp/B00XNSIYTU
Sent from my ASUS_Z00AD using XDA Free mobile app
zixen15 said:
The Rearth Ringke Fusion case is very good, fits well, I find it comfortable and of a durable material. Helps with the power button as the case plastic makes it pop out a bit and it can be pressed with a lot of ease.
Here is the link if you want to see it.
http://www.amazon.com/ASUS-ZenFone-5-5-Inch-Case/dp/B00XNSIYTU
Sent from my ASUS_Z00AD using XDA Free mobile app
Click to expand...
Click to collapse
I've read there are issues with the Rearth Ringke Fusion case and the camera's flash. Have you experienced problems in that area?
The Ringke clear case creates a nasty halo on photos whenever you use the flash --- much worse than the Nilkin (halo is barely visible). I still prefer it over the Nilkin case because it feels much sturdier: like it'll actually protect my phone *if* I drop it. It doesn't have a USB port cover on it unlike the Nilkin, though.
The Nilkin case just feels too flimsy for my tastes. I also don't use the flash on mobile phones anyway... most of them are too harsh.
If you really want a subtle highlight when taking photos, have someone else use their mobile's torch app to shine on your subjects
I have this case and it's good. I did a review of it too. Very sturdy and not glossy so firm in hand. Comes with a screen protector $10 buck is a great deal!
http://www.amazon.com/gp/product/B00S0BBFTQ?psc=1&redirect=true&ref_=oh_aui_detailpage_o05_s00
If you want a wallet case try this. $3.99 with promo code ASUSZEN2. I purchase one myself too.
http://www.amazon.com/gp/product/B00Y14WRCU?psc=1&redirect=true&ref_=od_aui_detailpages00
Good luck.
---------- Post added at 10:04 AM ---------- Previous post was at 10:03 AM ----------
allstar21369 said:
I've read there are issues with the Rearth Ringke Fusion case and the camera's flash. Have you experienced problems in that area?
Click to expand...
Click to collapse
I am not a heavy camera user, so I have not tried to see if there is any difference. I have used the camera with no problem. I am very confortable with it, it does its job how it should, protects the phone.
Sent from my ASUS_Z00AD using XDA Free mobile app
I am happy with the nilkin, actually dropped two times and it did its job (thankfully Murphy played nice on me and it always fell on a corner, if it would drop dead flat, screen first, I am sure it would be dead). The back texture helps holding it in my hand, plastic rear cover of 550 is very very slippery also not much bulkier than stock (already bulky and heavy phone).
Litoven said:
I am happy with the nilkin, actually dropped two times and it did its job (thankfully Murphy played nice on me and it always fell on a corner, if it would drop dead flat, screen first, I am sure it would be dead). The back texture helps holding it in my hand, plastic rear cover of 550 is very very slippery also not much bulkier than stock (already bulky and heavy phone).
Click to expand...
Click to collapse
The nillkin tpu transparent case is amazing so if anyone is looking to buy a good case for Zenfone then its worth a try.
Sent from my ASUS_Z00AD
As someone who requires a lanyard to keep the phone from flying away while in the pocket ...
http://www.ebay.ca/itm/400900339275
... I can always find a solution.
Sure, it doesn't protect the device while it's in my hands,but I have more problems with phones when I am not holding them.
I have the Rearth Ringke Fusion and it does add a glare to pics if the flash is on but good thing I rarely use my flash. Looks like a simple fix just cut the piece of plastic that separates the flash and camera but other than that great protection for the phone for now.
Another happy user of the Nillkin Natural TPU, it's an excellent fit and adds very little bulk to the phone. The edges make it much easier to grip the phone as well. Best case I've tried so far.
Nillkin tpu, with a tempered glass screen protector
Yesterday I dropped the phone from the sofa, about 1 meter, it suffered no damage. I'm using the original Asus bumper case. It's a bit expensive, but has a very nice finish.
Sent from my ASUS_Z00AD using Tapatalk
zixen15 said:
The Rearth Ringke Fusion case is very good, fits well, I find it comfortable and of a durable material. Helps with the power button as the case plastic makes it pop out a bit and it can be pressed with a lot of ease.
Here is the link if you want to see it.
http://www.amazon.com/ASUS-ZenFone-5-5-Inch-Case/dp/B00XNSIYTU
Sent from my ASUS_Z00AD using XDA Free mobile app
Click to expand...
Click to collapse
Thats the case I have and its great! It also includes a screen protector and a template to cut out a texture or image that can be swapped when ever which I kinda like.
Can someone tell us more about this case? Does the case cover buttons? Are buttons easy to press? Is it thick or easy to grip? Can some one upload some pix showing cutouts?
Thanks
I couldn't get a good read on this case, which is specifically why I didn't go with it. That and the high price point. $20 is a lot of money for a one-piece case, but about right for a two-piece case.
By my assessment and my knowledge of phone cases, here's what I'd expect from the ADOPTED case:
1) raised covers over the buttons.
2) button cover and inside surface made of TPU or similar mid-density flexible plastic.
3) outer surface made of either TPU (my suspicion), or made of a harder plastic. If 2 materials, then permanently affixed. Otherwise, 1 material, just one piece.
Presently, I'm suggesting the Lightning Knight Armor Defender case which goes for about $8 on Amazon. It is a two-piece design, with an inner sleeve made of silicone, and an outer polycarbonate shell. It's not the best design in terms of fit and finish. However, we're still very early into the N5X's accessory availability. A better design will come out. May as well get something decent enough for the moment, and switch to something nicer later.
Ive got the adopted case, because My spigen thin case was impeding on the microphone functioning. The adopted case has a really nice feel to it. The back is a smooth but not too slippery flexible material. The sides have a fine or to mid fine grain to them, but feels really good in the hand. The case through one five minute phone call did not impede any hearing or speaking functions. Overall I am very happy with it.
---------- Post added at 07:35 AM ---------- Previous post was at 07:35 AM ----------
I cannot do any pictures right now, i am at work
Loving ADOPTED So Far.
I've provided some photos. In the hand, it doesn't get annoying. My worry is with the clear frost option though. I feel it might be discoloring over time. :-/ It is slightly stubborn to remove, but that's a good thing when dropped. Easy to put on though. Brilliant start. I'll look for other cases but this one will always satisfy me.
you guys are the best! Thanks for all the info and pictures. I think this case looks good and you guys say it feels good in hand and is not slippery. I wanted something simple and this might do the trick.
How does it compare with one of the bugdroid cases, if anyone has had both? I'm sure they both fit perfectly but am looking for the one that adds the least bulk! ? The phone is just right width-wise without a case but it's just too slippery to hold, I'm sure I'll drop it so a TPU case is a must I think... ?
Thanks!
I had the clear frost one first but I didn't end up liking it. FYI my 5x is the black one. Ended up ordering the black case and returning the clear one. The case is nice. Materials feel nice in the hand and is pretty grippy. The edges go over the front a good amount for protection and the side buttons are comfortable and easy to use. The back is smooth while the edges around the phone has a slight texture to it for a more grippy feel. The case fits on very securely.
cheezycheeto said:
I had the clear frost one first but I didn't end up liking it. FYI my 5x is the black one. Ended up ordering the black case and returning the clear one. The case is nice. Materials feel nice in the hand and is pretty grippy. The edges go over the front a good amount for protection and the side buttons are comfortable and easy to use. The back is smooth while the edges around the phone has a slight texture to it for a more grippy feel. The case fits on very securely.
Click to expand...
Click to collapse
Cheeto, thanks for great pix. I just ordered the same black case for my phone.
I have this case and like it pretty well except for one thing: the part that wraps around to the front is too wide. I find it difficult to swipe from the edges successfully without pushing it out slightly with my thumb. Very annoying. I've currently got two other cases on their way and hopefully I'll like one of them better. I've never had this issue with any other case on any other phone, and when I look at the design of my old cases, I see that they all have a beveled edge on the front and they keep it as thin as possible, unlike the Adopted case.
waldox said:
I have this case and like it pretty well except for one thing: the part that wraps around to the front is too wide. I find it difficult to swipe from the edges successfully without pushing it out slightly with my thumb. Very annoying. I've currently got two other cases on their way and hopefully I'll like one of them better. I've never had this issue with any other case on any other phone, and when I look at the design of my old cases, I see that they all have a beveled edge on the front and they keep it as thin as possible, unlike the Adopted case.
Click to expand...
Click to collapse
So how did the two cases fair out against the adopted? The thickness and stuff.
I have this case and while I didn't love it at first I've come to really like it. Its thicker and more protective than most of the regular tpu cases but yet doesn't add too much bulk.
Sent from my Nexus 5X using Tapatalk
Case reviews: Rhinoshield CrashGuard & SolidSuit, Zeking Ultra Slim, Crave Slim Guard
i've used a number of cases that you can easily purchase from amazon before including the spigen tough armor, spigen neo hybrid, spigen crystal shell, ringke fusion and the rhinoshield crashguard. I think the 2 most important aspects of a good phone case is reinforced corner protection and elevated front edge to protect the screen. When I got the pixel 2 XL, I started looking for a slim yet protective case and I ended up trying the 4 cases below. I used each case about 1-2 weeks and thought I'd share my thoughts. I did receive the Rhinoshield cases from the company for free but they are not involved with my write up in any way, shape or form.
The photos attached are in accordance to the order of which the cases are reviewed.
Rhinoshield CrashGuard bumper case:
This was my favorite case when I had my galaxy s7 and when I moved on to the LG G5 then G6, I was disappointed to find out that they don't make the CrashGuard for them.
From my experience using this case with the galaxy s7 (which I had for about a year before it was stolen...), this case simply works. I am not the best when it comes to handling my phone therefore it gets dropped a lot; this case really does the job well when it comes to impact protection while being minimalistic. During the past 2 weeks with the case, I've dropped my pixel 2 a few times from different heights, mostly from standing height and some from when I get out of the car and the case has been effective. According to Rhinoshield, their cases have a 11.5 ft impact resistance rating which supposedly far exceeds the " US MILITARY DROP TEST STANDARD".
Many others have commented on how slippery this case is. Well, it is and that's because Rhinoshield now coats the cases to make them more stain resistant. For me, personally, I don't mind as I find it easier to slide in and out of my pockets.
Some physical changes I've noticed is that the case fits A LOT more snug to the point where it is quite difficult for me to take the phone out of the case. That's an inconvenience for me as I fly a drone here and there and in order for the phone to fit into the remote controller I have to take the case off. Now I may have to buy a separate phone holder for the remote controller. Another change that's worth pointing out is that in my old s7 case, the raised lip on the back of the case was more pronounced at the corners and the top and bottom edges. This gave me more of a piece of mind since it is a bumper case and the back of the phone is exposed. However, it seems like they have eliminated that from their design of the new cases and I wish they kept that. Lastly, now you can change up the color of the power button but the colored buttons have to be purchased separately. The power button is very responsive but the volume rocker you'd have to press a little bit harder.
Other non-noticeable changes they've made since I had their case for the s7 is they now use a different material (fancy name 'ShockSpread Material') for their cases which is suppose to be lighter, thinner but just as protective and durable.
The case is friendly with their screen protectors, as well with the Sparin TPU screen protector that I got from amazon. In terms of skin, it will not work with the Dbrand precision fit skin but fine with standard fit. However, it will leave an indent on the standard fit skin as shown in photos.
Lastly, if you happen to have a Feiyu tech SPG-c gimbal, with the heaviest counterweights the phone with this case just barely works.
Rhinoshield SolidSuit
Overall, very similar to the CrashGuard bumper case.
I'll highlight the differences:
- compatible with the RhinoShield add-on lens
- of course, heavier and bulkier (heaviest of the 4)
- feels very solid because of the overall construction, as well the back is protected
- most of the finishing is the same as the CrashGuard, however the back of mine has the carbon fiber finishing which I guess made it less slippery
- volume rocker is much more responsive than the CrashGuard
- did not work at all with the Feiyu tech SPG-c gimbal
Zeking ultra slim TPU case from amazon canada
In my opinion, very good case. For less than $10, you get padded corner protection plus raised front edge without much added bulkiness; this is just as good as cases such as ones from Spigen or Ringke but for 1/3 or 1/2 the price.
It is made of TPU and I haven't had the case long enough to speak about yellow-ing, but the TPU feels decent not cheap. On the inside of the back of the case, there are these microdots and I can't understand their purpose. You can actually feel them when you brush you finger across. The side buttons are responsive, clicky. A really thoughtful and unique design is that along the sides of the case the TPU's texture is different and it allows for better grip (almost like there's a very smooth sandpaper strip). The advantage of this case in comparison to the two Rhinoshield cases above is that it does feel slimmer in hand.
When it comes to impact protection, it doesn't have that "over 11 ft of impact protection" that's marketed for the Rhinoshield cases, however the few times I dropped the phone in this case it was completely fine.
I did try to use this case with the Dbrand 'precise fit' skin. It will not work well with the skin if you have the tendency to take your phone in and out of the case. As i took my phone out, it lifted the skin that goes around the the corner on the side of the phone. On the other hand, the 'standard fit' skin did just fine. In terms of screen protectors, it is compatible with the Sparin TPU screen protector as well as the protectors from Rhinoshield.
Similar to the Rhinoshield CrashGuard, this barely worked with my Feiyu Tech SPG-c gimbal.
Crave Slim Guard from amazon canada
This case is very similar to the Ringke Fusion in a sense that both have the TPU bumper that goes around the case, and the clear polycarbonate back. This case, however, has a very pronounced elevated front lip to the point where it almost feels like the phone is sunken in inside the case. It's very good if you're looking for extra raised front protection, however when you're swiping left or right on the screen you will feel the edge more so than the other cases. It may help if the company just round off the raised edges a little bit more. A thoughtful part of their design is that they raised the back corners a tiny bit; my guess is they are there to raise the back a little bit so when you sit the phone on a flat surface it doesn't scratch up the polycarbonate back. All the buttons super responsive and clicky; probably the best buttons of the 4 cases. The phone does feel pretty slim in this case and I think even slimmer than the Zeking TPU case. I don't remember dropping my phone while using this case, but based on its construction it should do just as good as the Ringke Fusion case but definitely not as good as the other 3 cases above.
Overall I think this case is just as good as the Ringke Fusion if not better protection because of the pronounced elevated front edge. Keep in mind, from my experience using these cases with a polycarbonate back they will get scratched up over time and you will see more finger print smudges.
When it comes to compatibility with skin and screen protectors, it is the same as above.
Similar to the Rhinoshield CrashGuard and ZeKing ultra slim, this barely worked with the Feiyu Tech SPG-c gimbal.
Long review but hope this helps. I will start another post for my screen protectors review as well as a review of the add-on lens from RhinoShield.
Nice reviews! Kudos
My fav is the Zeking ultra slim TPU!
Not related to the topic, but can you tell me where you get the yellow skin for your Pixel? I'm interested in that yellow lock button.
allweknowisa said:
Not related to the topic, but can you tell me where you get the yellow skin for your Pixel? I'm interested in that yellow lock button.
Click to expand...
Click to collapse
from DBrand
see my review here
https://forum.xda-developers.com/pi...and-skins-review-hyperblack-titanium-t3780607
The yellow power button is from rhinoshield. you can purchase the colored buttons separately on their site and it's compatible with their cases.
Thanks for your detailed review. One thing is that I tried Ringke Fusion and Crave Slim Guard; I think Ringke Fusion does provide a bit more of FRONT lip, doesn't it?
drvalianto said:
Thanks for your detailed review. One thing is that I tried Ringke Fusion and Crave Slim Guard; I think Ringke Fusion does provide a bit more of FRONT lip, doesn't it?
Click to expand...
Click to collapse
I don't have the exact measurements and my experience with the ringke fusion is with the lg g6 case. To me it seems like the crave slim guard has a slightly more raised front lip than the ringke fusion but then i am not comparing apple to apple.
Update:
I stuck with my RhinoShield Crashguard and it has protected my phone... extremely well. I have lost count how many times I've dropped it face down, down the stairs, and more.... yep, a bit clumsy with phones.
I stayed at this villa in Bali, and it literally tumbled down these stairs from top to bottom..and my phone remains immaculate. (except when i was in Bali I decided to use it briefly without the case..and of course I dropped it..... )
Included photos of the case with the worst scratches and also...the staircase where it literally bounced its way down...