[Q&A] [ROM-AOSP] OFFICIAL CM11.0 KFire HD 8.9 (KK 4.4.2) [05/20 AUDIO/CAMERA FIXES] - 8.9" Kindle Fire HD Q&A, Help & Troubleshooting

[Q&A] [ROM-AOSP] OFFICIAL CM11.0 KFire HD 8.9 (KK 4.4.2) [05/20 AUDIO/CAMERA FIXES]
Q&A for [ROM-AOSP] OFFICIAL CM11.0 KFire HD 8.9 (KK 4.4.2) [05/20 AUDIO/CAMERA FIXES]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:

LTE working?
So I searched through the CM 11, CM 10.2 and CM10.1 threads and am curious if LTE works on these ROMs?
Can anyone comment on if LTE works on the current snapshot/nightlies and if there are any LTE related issues? (I saw bluetooth support on 10.1/10.2 had some issues with diff firmware, does CM 11 suffer that as well?)

LTE
The LiquidSmooth ROM has LTE and bluetooth functionality; however there are some problems with video (Netflix, YouTube, etc.).

Upgrading from CM 10.1 to CM11 Clarification (New to this)
Thanks so much for your hard work on this project and others. I have a very stable running 10.1 setup that I just performed last week. I installed just as described and have TWRP 2.6.0.0 and the 2nd boot loader provided for that install. WORKS GREAT!
I wish to now go ahead though and upgrade again to the CM 11, and 4.4.2 etc.. I have read through both threads and still have a couple of questions... First- Do I need to JUST upgrade the TWRP to 2.7.*.*?, and if so what is the best way to do that ie. Run ADB commands again. Or, use something like FlashFly that I have seen used. Or, do I need to also load another new bootloader as well?. I assume if that is the case I would need to just run back through the whole ADB process again to just get to where I can Flash the latest CM release and Gapps.
Sorry if this seems like some basic information, but I am very new to this and am LOVING IT!... And your work Hashcode, as well as all of the other input from other users..
Any assistance would be greatly appreciated..
Thanks in advance!

Flash error
Still cannot quite figure this upgrade out. Seems I have lost ADB now.. When I use the
"fastboot -i 0x1949 flash bootloader kfhd8-u-boot-prod-8.1.4.bin" line I get Target reported max download size of 1006632960 bytes
error: cannot load 'kfhd8-twrp-2.7.0.0-recovery.img' : no error
Lost on this... ARRRRGGGG
---------- Post added at 07:58 PM ---------- Previous post was at 07:35 PM ----------
s I stated earlier the 10.1 install and upgrade went off without a hitch.. Pretty sure I just need to upgrade from 2.6 to 2.7 and then flash the new CM11 package and GAAPS, but I cannot figure out how to upgrade. This is very frustrating indeed.

Oh.. Secret Cynogen Menu for ADB.. LOL
Oh my.. Feeling like the fool. I had not heard of or read about the Developers Menu in Cm til just now. Obviously I know now why ADB was not working... LOL.... Maybe I can get this CM 11 installed now..
GEEEEEEEEEEEEEEEEEEEEEEEZ.

(Solved) Upgrading from CM 10.1 to CM11 Clarification Flash Issue
Ok, so that ONE little tidbit of information about how to activate "developers" menu in CyanogenMod was what was causing me to pull my hair out trying t figure out why I could no longer use ADB script and flash commands after I first installed CM10. That darn simple. That should be included for those of us that are new to doing this. Tap 4 times.....
Oh My... Well, maybe this 10 post limit will be up soon so I can actually start to engage and learn and assist.
Later

jem?
I have a KF 8.9 LTE software 8.5.1
How do Iknow if its a JEM?
tia
cancel

USB OTG Support
This build has been awesome for my KFHD. I bought it just because this was available.
My issue, though, right now, is that I can't get my OTG to work with a USB stick, or with a wireless keyboard/mouse. I have tried with both the ADB enabled and disabled, but no recognition of a device attached. I even double checked it against my Xperia Z3 just to be sure that it wasn't my cable. I have tried multiple apps as well with no luck. So, either, A) I am dumb (quite possible) and am doing something wrong, or B) the support isn't there yet.
I am running cm-11-20150309-NIGHTLY-jem.zip
If I am doing something wrong, please, let me know. Otherwise, are their plans to include it? If I were more linux literate, I would work on it myself, but I just haven't gotten to that level yet.
On a side note, is CM-12 in the works for Jem? Just curious.
Again, thank you so much for all your hard work, this is amazing.

kujo1b09 said:
The LiquidSmooth ROM has LTE and bluetooth functionality; however there are some problems with video (Netflix, YouTube, etc.).
Click to expand...
Click to collapse
And the GPS doesn't work.

Multi users
Is multi users supported on CM11? When I look under Settings > Device the "User" option is missing and as far as I know it should be supported in 4.4. Any way to get this feature working?

Present on mine.
That option is available on my 8.9 Jem. Running the March 30th nightly.

Related

[Q&A] [ROM][4.4.4][TeamCanjica] CyanogenMod 11.0

Q&A for [ROM][4.4.4][TeamCanjica] CyanogenMod 11.0
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
question
Hi guys, i have a bug: calling history not show
Problem
It repeatedly giving error com.android.phone has unfortunately stopped . And the ROM is able to search the mobile networks but there is bar in signal strength . Means it not getting the signal .
Rest everything is ok .
PLease help me ASAP .
Does video recording work on your phone? Because I have camera app crashing all the time after switching to video.
Some Question about this ROM
Hi,
my Ace2 is still running under Stock Android 2.3.6. and I would like to Upgrade to CM.
For me stability and a working phone are more important than having the latest android Version, so my question is - which CM Version would you recommend? CM11 or is CM10.2 more stable? And is the latest version also the most stable one?
Is it correct that the only issue with CM11 is the Live streaming problem and with CM10.2 the memory leaks reported by some users- or are there more problems with these ROMS? A well working GPS is also important for me - is this the case?
And how difficult would it be to go back to stock 2.3.6. if CM is not working well for me?
Sorry for all the question and thanks in advance!
bootloop on the latest build from Rox
stuck on boot loop as is:
http://forum.xda-developers.com/showpost.php?p=56027724&postcount=5377
cm-11-20140807-UNOFFICIAL-codinap from @ace2nutzer
Install the firmware, reset the smartphone, then GAPS. If all at once, when you start on selecting the language setting is not. This, in my case, I tried several times. @ace2nutzer when to expect an update of your firmware
Hello
i have the i8160L,are the links you gave working on that version?
also if its working and i root that cm11,can i get back to my original firm later?
thanks
Bootloop
Rox, are you going to be fixing teh bootloop in the last build?
Also: the call log is empty, is there any fix for that?
Blackscreen
I want to record a logcat showing a black screen ocurring on wake up, with the s6d driver, in order to help in the resolution of the bug...
What's the priority level I should set for the catlog? Verbose, Debug, Info, Warnings, Errors, or Fatals?
Reboot loop with 1014 update
WARNING: I'm stuck in a reboot loop after updating to the recent 1014 version. Can't even get into recovery mode anymore. Flashed stock rom, installed CM again: same picture.
Grmblprmf said:
WARNING: I'm stuck in a reboot loop after updating to the recent 1014 version. Can't even get into recovery mode anymore. Flashed stock rom, installed CM again: same picture.
Click to expand...
Click to collapse
Flash chrono kernel..1014 build got a kernel broken...
@hackstorm1989
I have the GT-I8160L too.
This ROM specifically i haven't tried yet, but I've installed 2 different builds of NovaFusion CM11 (http://forum.xda-developers.com/showthread.php?t=2568105) and now I'm running J-TEAM AOSP (http://forum.xda-developers.com/showthread.php?t=2588054).
As TeamCanjica, both these ROMs are for the GT-I8160, but can be installed on GT-I8160L by changing the lines in the updater-script of the ROM (META-INF/GOOGLE/ANDROID/) where it checks the model of the device. I also read that the tee folder (system/lib/) of the ROM must be replaced by a copy of a tee folder from a running GT-I8160L firmware with SIM and carrier services properly working.
I've followed this guide:
http://brasildroid.com.br/showthread.php?t=23729
So, just by checking the updater-script of teamcanjica CM11, i GUESS it could be installed on GT-I8160L through the same 2 steps that i did with the other cited ROMs.
Also, I remember seeing other members running these ROMs on the L version while reading these 3 threads. I really wanna know what exactly differences are between these 2 device versions.
Please anyone let me know and correct me if I've posted any wrong information.
@soraxx
I can´t post in the main thread yet (10 post treshold), but maybe you read this or someone can copy this into the main thread.
I had exactly the same problem (audio but no video picture) and a simple change from stock browser to firefox solved it - Maybe it works for you too.
This should be main thread from now on
Same problem
Bootloop
14.10 bootloop
@ace2nutzer
I don´t agree with your statement that everything is working with the 07/08 build. I am using that build and the camera video recording is definitely bugged.
Elder666 said:
@ace2nutzer
I don´t agree with your statement that everything is working with the 07/08 build. I am using that build and the camera video recording is definitely bugged.
Click to expand...
Click to collapse
read this carefully:
http://forum.xda-developers.com/showpost.php?p=56171431&postcount=5436
Hi guys,
In stripped versions I notice camera quality and time of battery are worse... I'm going to try the build made for ace2nutzer 07-aug-2014 and stay on it by now.

[Q&A] [ROM] [NIGHTLY] [KitKat] [4.4] CyanogenMod 11.0 nightlies

Q&A for [ROM] [NIGHTLY] [KitKat] [4.4] CyanogenMod 11.0 nightlies
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Hi, please see my post in old thread
I am having a problem with this rom. It runs great and is surprisingly fast and smooth. But I just saw in F-Droid that the rom reports that it does not provide android.hardware.telephony. This wonders me because I am able to call.
Is there any possible to have 5.0 running on our device?
Is there any possible to have 5.0 running on our device? From a old user holding a G2
error 7 trying to install kitakt 4.4
Can someone please help me?
I'm getting the status 7 error message when trying to install kitkat 4.4 on my desire z. Does anyone know how I can fix this error? I have clockwork mod 5.0.2.7 installed.
It says
(status 7)
Installation aborted
I have tried various other roms, and the only one that works is cyanogen mod 7.2
groan.
sonmamnibus said:
Can someone please help me?
I'm getting the status 7 error message when trying to install kitkat 4.4 on my desire z. Does anyone know how I can fix this error? I have clockwork mod 5.0.2.7 installed.
It says
(status 7)
Installation aborted
I have tried various other roms, and the only one that works is cyanogen mod 7.2
groan.
Click to expand...
Click to collapse
update your recovery
here is link
http://forum.xda-developers.com/showthread.php?t=1377754
hamxa266 said:
update your recovery
here is link
http://forum.xda-developers.com/showthread.php?t=1377754
Click to expand...
Click to collapse
A useless app that does nothing.
Is there a newer version of clockworkmod in .zip format available?
sonmamnibus said:
A useless app that does nothing.
Is there a newer version of clockworkmod in .zip format available?
Click to expand...
Click to collapse
The easiest way to install recovery is by using that app , any way if your not able to install via application then you must try fastboot or use secondary app like flashify to install recovery . And i really don't know about flash able zip file files for recovery !!
hamxa266 said:
The easiest way to install recovery is by using that app , any way if your not able to install via application then you must try fastboot or use secondary app like flashify to install recovery . And i really don't know about flash able zip file files for recovery !!
Click to expand...
Click to collapse
zip files are easy. . . . download, boot into clockworkmod, select install zip fiel, boom! done.
This useless app won't even install. all it does is give me stupid information about what a release candidate is...well least I get my refund. back to square one.
Can anyone help me install a new version of clockwork mod? for desire z/G2 PLEASE?
Hi, ok i will try to help you guys...
Its a long time ago, but probably this is a easy way.
https://market.android.com/details?id=ext.recovery.control&feature=search_result
Try, to install 4ext, an than push recovery install in this app.
Thats it.
Lg ivi
---------- Post added at 11:22 AM ---------- Previous post was at 11:17 AM ----------
Ops, i see, the link above tells the more or less the same...
Hmmm, ok probably you guys knew to less of root,bootloader and flashing.
Ok, maybe this will help you
http://forum.xda-developers.com/showthread.php?t=1682479
Lg ivi
I have one question and a short unrelated diatribe. My question is: I just rooted a G2, and this was the first rom I installed. Occasionally I'm losing service/gps etc and I'm assuming I just need to update the radio. Through my research I understand I'll need a matching RIL file for my rom to accompany the radio firmware update. How would I do that for this rom? Or do I need to?
On an unrelated note, I'd like to say thanks so much for continuing to provide nightlies for this phone. I just bought a G2 because the form-factor/hardware feature-set is perfect for me and is also super rare/no longer produced (qwerty slide-out kb, trackpad). Having the hardware feature-set along with up-to-date functional software to boot is HUGE for me. Especially considering the latest nightly upload patched stagefright. KitKat runs almost flawlessly considering the fact that I overclock to 1.5Ghz (didn't seem to effect battery life), reduce animations, don't use the gapps package / google play framework and shy away from bloated apps (besides spotify). With a little thought and creativity in configuration and app selection I have no major issues. For example, good ol brut mod gmaps runs super fast (with some bugs). The classic rolle tube modded youtube app works better than any version of google's youtube app ever has and it even lets me shut off the screen when listening to music.
I've always been bothered by the fact that the android after-market rom dev community seems to mostly abandon projects and let them drift into link-rot hell about as fast as manufacturers put out new phones. No disrespect to the people volunteering their time to make old phones last a couple more years, but when a dev puts themselves out there as a service provider I believe there's a certain degree of responsibility that comes with the implied trust and reliance others are giving the dev by using their rom. So anyways thanks for keeping this one alive. If development ever dries up for the G2 I'll likely roll up my sleeves and figure out rom dev for myself.
---------- Post added at 02:49 PM ---------- Previous post was at 02:22 PM ----------
Nevermind, I figured out updating the radio thanks to this post:
http://forum.xda-developers.com/showpost.php?p=58542873&postcount=57
But my diatribe still applies. Thanks!!!!
hardwarekeyboard problem
hello,
I've installed cyanogenmod 11.0.
It is not possible to type numbers or symbols with fn+letter on the hardware keyboard. exept [email protected] gives a !.
I tried serveral language mappings but it is always the same result.
thanks
Led

[Q&A] [GT-I9195][ROM][Official][4.4.4] CyanogenMod 11.0 Nightlies for S4 Mini LTE

Q&A for [GT-I9195][ROM][Official][4.4.4] CyanogenMod 11.0 Nightlies for S4 Mini LTE
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
buggy CM
toeterbaas said:
Dont you guys have problems with freezing camera especially with flash?
Click to expand...
Click to collapse
gt-i9195 here.
Installed CM11 nighly form 10.10.2014. Noticed bugs: Dialer blocks while receiving calls (fatality); Contacts: important vcards from extsdcard crashes;
Installed CM10 latest stable - Contacts won't see ext sd card mounted (I guess) since it says it found no vcard to import from there. Really don't feel motivated to go any further, restoring stock..
--
Ever lasting boot
Hey there, I recently followed this tutorial on how to install Cyanogenmod on your GT-I9195. Though, I have ran into a very annoying issue and I'm stuck without any clue on how to solve it:
I rooted my phone successfully using CMW and the rootkit supplied in the rooting thread referred to here. The phone worked fine and SuperSU was present after the root.
I then proceeded to wipe userdata / cache and install the latest CyanogenMod 11 nightly(11/11/2014) + Gapps supplied from this thread.
I rebooted the phone after the installation was complete of both CyanogenMod and Gapps.
I was greeted with a never ending Cyanogenmod booting screen.
I am not using a custom kernel, thought I'd just mention that too.
I tried just installing Cyanogenmod and rebooting too, still a never ending boot screen.
I am really lost because this has worked for just about everyone who replies to this thread. I noticed some people have been having problems lately, could it just be the latest nightly causing problems?
Thanks in advance!
EDIT: I installed CyanogenMod 11 M12 and now it works perfectly! The build from 11/11/2014 is not working properly it seems.
question about compatible with sgh-i257m?
first off i would like to sincerely say thank you to arco68. I wish i found your cf auto root app sooner as i think it is by the best method off gaining root access by far! I just switched to android 2 years ago and just love it compared to fighting with jailbroken pos! Lol... I see arco68 is working on this cyanogenmod rom for i9195? I have a sgh-si257m and as far i know is pretty much the same cell except for fm radio? I rooted with cf auto to keep my device name and flags default ( again hail arco68) . But before i jump and mess something up (done that before) can someone confirm i can just do a normal rom flash and gapps and everything should work? ( even tho i have different phone)
Does this rom have its own kernel? If so will my device name change? Sorry for the newbie questions im still learning. Again thanks to arco68 i wish i could donate for your hard work but im layed off right now and with 3 kids.....well once im working i sure will. Thank you All
How I can move my apps in the memory card?
shanephelan said:
first off i would like to sincerely say thank you to arco68. I wish i found your cf auto root app sooner as i think it is by the best method off gaining root access by far! I just switched to android 2 years ago and just love it compared to fighting with jailbroken pos! Lol... I see arco68 is working on this cyanogenmod rom for i9195? I have a sgh-si257m and as far i know is pretty much the same cell except for fm radio? I rooted with cf auto to keep my device name and flags default ( again hail arco68) . But before i jump and mess something up (done that before) can someone confirm i can just do a normal rom flash and gapps and everything should work? ( even tho i have different phone)
Does this rom have its own kernel? If so will my device name change? Sorry for the newbie questions im still learning. Again thanks to arco68 i wish i could donate for your hard work but im layed off right now and with 3 kids.....well once im working i sure will. Thank you All
Click to expand...
Click to collapse
It has its own kernel, and device name will not change. Installing it will trigger knox though.
Max call volume in S4 Mini CM11
Hi,
I have a problem with call volume in S4 mini with cm-11-20141202-NIGHTLY. So in every call, the sound volume is set to max and I need to turn it down (call sound volume setting isn't remember in the next call). It's really annoying. If you resolve this problem please send me information how to do it.
Best regards
which proprietary blobs should we use when compiling cm12 - TheMuppets or Arco's fork?
https://github.com/arco/proprietary_vendor_samsung
https://github.com/TheMuppets/proprietary_vendor_samsung
Hi guys, I'm new here, I've just bought a s4 mini and I want to install this rom on it. I have 4.2.2 ml4 on the phone, knox enabled. I've read around the forum, but I'm still a little bit in the dark. One question would be if I install a custom rom, there is no way to do it without tripping knox as it needs custom recovery? And the second one do I need to be on a specific baseband jb or kk to install kk? Thanks
cojocar.andrei said:
Hi guys, I'm new here, I've just bought a s4 mini and I want to install this rom on it. I have 4.2.2 ml4 on the phone, knox enabled. I've read around the forum, but I'm still a little bit in the dark. One question would be if I install a custom rom, there is no way to do it without tripping knox as it needs custom recovery? And the second one do I need to be on a specific baseband jb or kk to install kk? Thanks
Click to expand...
Click to collapse
On both questions the answer is NO.
I have flashed my S4 LTE just after I unboxing the phone and downloaded all I need from Arco's thread for root.
Hi,
i have a little problem with my vibration.
My vibration doesn't work. i have try all settings and a order costum rom. The vibration isn't broken, because at the start vibrate the mobil phone, before it boot on the cyanogenMod
Have anyone a idea?
Hi does anyone know why the links for cm11 nightly are not working,when you try to download the size is only something like 3k
server down
I cannot download anything for i9195 cm-11...
Can you fix it?
mirror
kingzback said:
I cannot download anything for i9195 cm-11...
Can you fix it?
Click to expand...
Click to collapse
here is an unofficial mirror-link: http://forum.xda-developers.com/showpost.php?p=58234747&postcount=548
Why do you upload it ? It´s just right here from Cyanogenmod...
http://download.cyanogenmod.org/get/jenkins/97652/cm-11-20150105-NIGHTLY-serranoltexx.zip
gfogger said:
Why do you upload it ? It´s just right here from Cyanogenmod...
http://download.cyanogenmod.org/get/jenkins/97652/cm-11-20150105-NIGHTLY-serranoltexx.zip
Click to expand...
Click to collapse
Have you tried to download from this link?
Are various days that this link doesn't work.....
DeusEx80 said:
Have you tried to download from this link?
Are various days that this link doesn't work.....
Click to expand...
Click to collapse
in the main thread someone upped the latest beta here:
http://www.filedropper.com/cm-11-20150105-nightly-serranoltexx
v00d007 said:
in the main thread someone upped the latest beta here:
http://www.filedropper.com/cm-11-20150105-nightly-serranoltexx
Click to expand...
Click to collapse
I answered to gfogger that who said:
gfogger said:
Why do you upload it ? It´s just right here from Cyanogenmod...
Click to expand...
Click to collapse
The latest nightly is uploaded by me : http://forum.xda-developers.com/showpost.php?p=58234747&postcount=548
Hi,
I would like to download the latest CM11 but it's neither on CM nor any other share that I tried.
Could someone help me downloading this ROM?
I don't want to use CM12 because I use xposed.
Thanks

[Q&A] [ROM][OFFICIAL][KitKat 4.4.4][N5100 / N5110 / N5120] PAC-ROM 4.4.4.RC-2

Q&A for [ROM][OFFICIAL][KitKat 4.4.4][N5100 / N5110 / N5120] PAC-ROM 4.4.4.RC-2
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][OFFICIAL][KitKat 4.4.4][N5100 / N5110 / N5120] PAC-ROM 4.4.4.RC-2. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Back Button in not working in pacman kitkat
MariuxReloaded said:
Ok, thank you very much, deskSX! I'll flash and try this ROM next week!
Click to expand...
Click to collapse
I love this Rom but i am facing a problem with Back Button which is not working on my Samsung Galaxy Note 8
Help Me
I have installed pac man rom on my Samsung Galaxy Note 8 and its working fine but after some use it stops working Keyboard, Menu Key and Back Key and I have to Restart my device . and again after some time it stops and i have to do it again and again. Plz Help me what to do to get rid of this problem?
screen mirroring
Hello, quick question guys, does this rom support screen mirroring? thanks
i dont see any paranoid setting inside PAC rom. does this features been removed? Im using RC2.
Lollipop on GT N5110 Likely? Possible? How?
Been out of the scene for a while..is there any way to get Lollipop on the GT N5110 or as close to stock as possible.
If anyone could provide a link to the necessary rom that would be awesome! Think I've had enough of this Touchwiz with Nova.
Thanks!
I deactivated all custom animations and they stopped, try that to stop random reboots!
voice problems in upcoming and outgoing calls
i had some issue with outgoing and upcoming calls, its seems soundless...from my side and also from the other side. but the ringtone still ringing though...current im using pac_n5100-nightly-20141206.zip
Does this require to unlock the bootloader?
What rom is it? Please help
Thanks in advance!
---------- Post added at 06:01 PM ---------- Previous post was at 05:49 PM ----------
What rom is it? Please help
Thanks in advance!
No 3g connection!
22\03 nightly doesnt have mobile network...
Google Movies & TV and Netflix not working.
Accident posted in wrong thread.
---------- Post added at 05:45 PM ---------- Previous post was at 05:41 PM ----------
I am not sure what I am mising here, and I hope someone might be able to point out something I am doing wrong.
I have the latest version of TWRP for n5110 2.8.5.0 from the thread here.
Downloaded nightly pac_n5110-lp-Nightly-20150323
GAPPS 5.0 from here https://basketbuild.com/gapps[/URL]
Full wipe, flash in order:
pacman rom
GAPP's
I let it boot, setup my account. Netflix sits there loading for a while then says "Sorry, we could not reach the Netflix service, Please Try again later. (-9)".
Google Play Movies & TV will load up, but if I try to run a trailer or something, it will close out. It was giving me the same problem on the CM12 rom for n5110 as well, which leads me to believe that I am missing something in my flashing process.
Do I need root for these apps to work correctly?
Video issues still?
Hi,
Just wondering if the latest version still has the video issues on apps like snapchat.
I tried two different 5.0 roms and both had the same playback delays/not working issues on some apps with built in video, does this or any other 5.0 rom have this issue resolved yet or are we still waiting on the official rom versions to be fixed?
Netflix and Play Movies & TV not working?
Could some one verify that Netflix and Google Play Movies & TV aren't working currently?
I have flashed multiple lollipop roms with the same results, Google Play Movies & TV shuts down if I try to play anything, and Netflix sits at the load screen (before you get to the selection screen) and then throws the error...
"Sorry we cannot reach the netflix service (-9)"
From what I can gather, this seems to be a common occurrence with newer custom roms. Just want to confirm this to see if I just flashed something wrong, or if the ROM is still being worked on in these aspects.
Edit
Forgot to mention, Awesome ROM! Everything else I have tested so far has worked great.
It is a pleasure to speak with you.
I would ask two things, I read that more than one person when you lock the screen orientation of the screen is rotated, distorting the image, someone else happens? I would like to correct it.
I would also like to know how to do root.
Thanks greetings!
Windows 8.1 install process
Can the process be shared on how to install windows 8.1 on Samsung Galaxy Note 8.0 N5100 3G model.
Raju Malkani
[email protected]
raju.malkani said:
can the process be shared on how to install windows 8.1 on samsung galaxy note 8.0 n5100 3g model.
Raju malkani
[email protected]
Click to expand...
Click to collapse
it is imposibble!
Why is there a separate Q&A section if no one is answering the questions. I've been reading the forums for days to no avail. I'm running PAC MAN ROM on N5110 no Netflix or play video. Can someone point me to a fix or a custom rom for my device that has working Apps? I just want a good daily driver regardless of what kind of OS
LennyBreaks said:
Why is there a separate Q&A section if no one is answering the questions. I've been reading the forums for days to no avail. I'm running PAC MAN ROM on N5110 no Netflix or play video. Can someone point me to a fix or a custom rom for my device that has working Apps? I just want a good daily driver regardless of what kind of OS
Click to expand...
Click to collapse
Just about all the Q&A forums are like this. It's automated bull crap if you ask me.
S-pen eraser not working
Hey so great rom! But when using the S-pen with Eraser it doesn't register it at all with apps such as Papyrus. Possible option to enable?

[Q&A] [ROM] [5.0] Deb - lrx21m

Q&A for [ROM] [5.0] Deb - lrx21m
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] [5.0] Deb - lrx21m. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
data is working just fine on my side.
Anyone able to root the device, everything else works fine for me along with twrp but the root app keeps saying binaries not updated
panjaby said:
Anyone able to root the device, everything else works fine for me along with twrp but the root app keeps saying binaries not updated
Click to expand...
Click to collapse
I believe it is because a new kernel has to be generated in the boot.img with permissive mode turned off. Once that is flashed then root will work properly.
@QA Bot could you please change the build number from "m" to "t" for me in the first post. I do not want people getting confused.
Root is working with latest chainfire app and element fix kernel.
Awesome
root
Root is OK with chainfire utility.
Root is OK
I too have successfully obtained root using Chainfire's AutoRoot for DEB 4.4.4 (NOT the one for FLO 5.0); everything is working mighty fine so far.
Thank you very much, fosser2!
I'm coming from completely stock. I see you have a simple fastboot image for aosp... Can I get the gapps on as well without a custom recovery being installed?
hey, i has just install rom, but when i connect my laptop, it don't have MTP conect, so now, i can't flash a new rom because my laptop don't receive my nexus 7 via USB, what should i do next?
hotspot
Was hotspot accidentally leftout or is it not compatible?
Data Speed
Thanks for this great rom! Everything seems to work for me, but i have noticed slower data speeds than i had on 4.4.4. Anyone else noticing that?
Awesome work! Thanks. Everything works. I love stock Android with no modifications. Keep it up.
gg
ggg
AOSP Nexus 7 LTE (2013) Building from Source - Driver?
EDIT: Moved this to a separate thread as this is for an outdated version.
I'm just learning to develop from AOSP right now, I've done some modifications in the past but want to learn to build AOSP roms from source.
I've gone through and setup my build environment, downloaded source code for 5.0.2_r1 and downloaded the proprietary drivers and extracted them into a vendor folder within the root of the source tree. When I build the ROM I don't get any errors, but I get a boot loop.
I've tried using the 4.4.4 drivers for Deb, as well as the beta drivers, and both produce the same result with the boot loop. Can anyone provide me any guidance on building this or if there is customization required to get 5.0.2 to work on Deb? I know there are ROM's out there and Fosser has build a 5.0.2 stock AOSP rom, but I can't figure out how to get it to boot. Everything seems correct right up to the point of booting after fastboot loading the device.
Thanks!

Categories

Resources