Develop Bugs

[Q] Canvas 4 stuck at micromax boot logo

Guys i was flashing ported cyanogenmod in my canvas 4 shared by one of the members in this forum,but mistakenly i didn't look at bugs.It had lot of bugs so i decided to flash another rom but after flashing it is stuck into micromax logo, any help?

yes it does !
pratikbsp said:
Guys i was flashing ported cyanogenmod in my canvas 4 shared by one of the members in this forum,but mistakenly i didn't look at bugs.It had lot of bugs so i decided to flash another rom but after flashing it is stuck into micromax logo, any help?
Click to expand...
Click to collapse
GO to recovery mode !
select wipe data factory reset
then go to mounts and storage and select format system
then select
wipe dalvik cache in advanced
and install new ROM via install via sd card
and reboot

actually my phone is not going itno recovery mode,i tried a lot to press volume down+power button

in that case !
pratikbsp said:
actually my phone is not going itno recovery mode,i tried a lot to press volume down+power button
Click to expand...
Click to collapse
TRY FLASHING VIA SP TOOLS
go here
http://forum.xda-developers.com/canvas-4/development/stock-canvas-4-a210-stock-rom-v4-2-1-t2782388
[Stock][4.2.1] Canvas 4 A210 STOCK ROM v4.2.1 (Unedited):laugh:
)

I have ported miui custom rom,can i install this rom instead of stock rom

first go for stock than go for miui ported
pratikbsp said:
I have ported miui custom rom,can i install this rom instead of stock rom
Click to expand...
Click to collapse
flash stock first !

i am a newbie ,so i dont know how to enter into recovery mode using sp tools

here is the tutorial you need !
pratikbsp said:
i am a newbie ,so i dont know how to enter into recovery mode using sp tools
Click to expand...
Click to collapse
http://forum.xda-developers.com/canvas-4/general/guide-flashing-guide-sp-flash-tool-t2745892
do as told step by step
and download the stock rom from the link above i gave earlier

it booted into recovery mode by pressing both volume up and down+power button,then i flashed the rom but its still stuck into micromax logo

yogesh.kalyana said:
TRY FLASHING VIA SP TOOLS
go here
http://forum.xda-developers.com/canvas-4/development/stock-canvas-4-a210-stock-rom-v4-2-1-t2782388
[Stock][4.2.1] Canvas 4 A210 STOCK ROM v4.2.1 (Unedited):laugh:
)
Click to expand...
Click to collapse
I installed this rom through cwm based recovery in recovery mode but it says installation aborted

how many times do i say to flash it by SP TOOLS!
pratikbsp said:
I installed this rom through cwm based recovery in recovery mode but it says installation aborted
Click to expand...
Click to collapse
how many times do i say to flash it by SP TOOLS!
bro either accept the information or leave it
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Which rom you were flashing?
By which method? Cwm or sp tools
Sent from my canvas 4

Time
Are you waiting 15 min ?

pratikbsp said:
Guys i was flashing ported cyanogenmod in my canvas 4 shared by one of the members in this forum,but mistakenly i didn't look at bugs.It had lot of bugs so i decided to flash another rom but after flashing it is stuck into micromax logo, any help?
Click to expand...
Click to collapse
Here you go flash wiko stairway stock rom completely bugless rom
http://forum.xda-developers.com/canvas-4/general/wiko-stairway-stock-rom-relieved-pain-t2952914

[RECOVERY][P6S-U06][Unofficial TWRP Recovery 3.0.3-0]

Hi everyone.
Here's my build of TWRP for P6S-U06.
Features:
Supports USB OTG, so you can use USB flash drive as external storage for backups, zip installations.
Because device doesn't support external SD card, I've added feature to make backup of internal storage (to USB flash of course).
Combined with stock EMUI 3.1 recovery. In case of power-on by holding power + vol+ or rebooting into recovery by command or any 3rd part application: will boot in TWRP. In case of local update, OTA-update, "force update" (3buttons method) or factory reset: will boot into EMUI recovery.
Off-mode charger updated from EMUI 3.1
custom.bin and cust symlinks are saved/restored (if they were exist) in case of Wipe/Format Data. So there not gonna be "cust" issues after factory reset in TWRP.
Requirements:
Unlocked bootloader
Android 4.4.2 - 5.1.1
Installation:
Reboot in fastboot mode
Flash image via fastboot
Code:
fastboot flash recovery TWRP_Recovery-3.0.3-0.img
fastboot reboot
From TWRP: Press "Install" and select zip-archive
Notes:
Because internal storage is not a separate block device and just a subfolder of "userdata" partition, before you can make backup/restore of internal storage, first you should do Mount -> Data.
It will not work on P6, it's for P6S only.
Download: TWRP_Recovery-3.0.3-0.img
For TWRP: TWRP_Recovery-3.0.3-0.zip
Previous:
Download: TWRP_Recovery-3.0.2-0.img
For TWRP: TWRP_Recovery-3.0.2-0.zip
Download: TWRP_Recovery-3.0.0-0.img
For TWRP: TWRP_Recovery-3.0.0-0.zip
TWRP_Recovery-2.8.5.0.img

Is it possible to get this new version for our beloved P6?

tileeq said:
Is it possible to get this new version for our beloved P6?
Click to expand...
Click to collapse
http://4pda.ru/forum/index.php?showtopic=539568&view=findpost&p=37725285
If you can't download from 4pda, ask for the author of build, here is also here on XDA: Razziell

Hi Kosyan, how to roll back to stock recovery?
Thanks
Edit: I know how rollback but in 4pda is it not possible to download the stock recovery I need!
Can you post it hier please?

Can you please share TWRP 2.8.7.0 material design by Razziell? I can't login on 4pda.ru because of a Russian captcha!

@Kostyan_nsk, could you send me a link to your device tree please. Want to check something out real quick.

I wasn't upload my dt. I'm too lazy for this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PM me what exactly are you interested in?

WHat if i have android 4.2.2 ?? is it gonna work ?

kye04 said:
WHat if i have android 4.2.2 ?? is it gonna work ?
Click to expand...
Click to collapse
No, it will not boot.

THANK YOU !!!
Tell you my story : a week ago i bought a P6S-U06 from aliexpress. It came with the 4.2 system. Interesting was that there was no update , not by wifi nor by Hisuite.
And i wanted to update to 4.4 And i try all kind of recoveries and boot.img untill i bricked it.... Actually i got the bootloader locked and i can not flash anytrhing anymore.....
Now i bought a second P6S-U06 that came with 4.4 . Thanks to your twrp, now i have twrp on my phone.
Please help me also with a nice kernel and a nice rom. I found some stuff on 4pda forum but i do not know russian and i cannot make an account to download .
If you do not want to post here, please send them in privat.
Once again , THANK YOU !!!
My phone is now TWRP with P6S-U06V100R001C17B606 .

Hi .I have 2 P6S-U06 . Both of them 4.4.2 In one of them i flashed thru fastboot and twrp works perfect.
The other one simply does not accept that. see attached picture .
I forced it installing Flashify . I wrote the recovery with it. After reboot, the leds start blicking red and green and after that a screen appears saying something happened sith my boot, press power button for 6 seconds. I turn off the phone , restart it, it boots to system but stock recovery...
How is this possible ?
WHat can i do ?
Also is there a 5.1.1 image that can be updated as update.app in dload folder ?

CUBOT S550 5,5 HD MT6735 1,3Ghz 2gb/16gb fingerprint 3000mAh

Tomorrow i will receive this new Cubot series with fingerprint and good specs.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Official Page:
http://www.cubot.net/Index.php/mobile/view/id/263.html

Reserved for review and modding

Cubot claim that it has a 3000mAh battery.
Battery mAh measured to 2795 here http://peecee.dk/uploads/012016/20160123_204834.jpg
Geekbench 3 battery test: http://browser.primatelabs.com/battery3/197467 (09:35:40 / 3589)

thanks S7yler , not bad, also battery test seems to be very good!
I wait if from EFOX, and i hope to have mine today or tomorrow!

Just Arrived.. .white color in my sample!
first challenge was to create TWRP .. successfull!
http://www.needrom.com/download/twrp-2-8-7-3-material-play-megthebest/
Archive contain Boot Unlocked and TWRP Material Play ported by me!
Tested successfully with V06 January 2016 rom.
1- Download and Install correctly Mediatek Preloader drivers
( Take care on Windows 8.1/10 drivers, you need to disable driver signature before install
https://www.youtube.com/watch?v=50pD0mONm44
http://laurentiumihet.ro/technology...-for-32-64-bit-drivers-installation-tutorial/
https://thebroodle.com/microsoft/windows/install-mediatek-mt65xx-usb-vcom-drivers-windows-8-8-1/
2- enter Engineering Mode MTK with Dialer code *#*#3646633#*#*, go into log and debugging, tap on user2root and tap on ROOT, shut down smartphone.
3- With flashtool load MT6735_Android_Scatter-Play.txt
4- Select download and connect smartphone to pc (smartphone must be powered off)… in few seconds will start the process and the new TWRP will be flashed.
3.1- To restore original stock recovery, you need load ad point 3 the file MT6735_Android_Scatter.txt
P.P.S to enter in the recovery, power off the smartphone, push VOL + and Power at the same time, you will see three words with VOL + you move selection, with VOL – you must select Recovery
To have root flash with TWRP the archive supersu.zip found here: https://download.chainfire.eu/696/supersu/

Unboxing & Review (Italian language) :

any custom roms for that phone ?

megthebest said:
Just Arrived.. .white color in my sample!
first challenge was to create TWRP .. successfull!
Archive contain Boot Unlocked and TWRP Material Play ported by me!
Tested successfully with V06 January 2016 rom.
Click to expand...
Click to collapse
This is great work. Have you got a version of this that works with the latest firmware? I upgraded my firmware to the June v10 firmware and when I put this version on it just boot loops the phone.
Thanks.

So no chance of an updated TWRP then megthebest?

I updated the TWRP myself and put it on needrom, for anyone who wants to use TWRP with the latest official ROM. I tested it on my phone and it works I used it to root the phone and install xposed framework.
All credit to megthebest, it is his work.
http://www.needrom.com/download/twrp-2-8-7-3-material-play-megthebest-3/

Thanks Famineuk! Can I update to the new version directly from twrp recovery or do I have to use the flashtool again?

I did it using the flash tool. I never tried it directly through TWRP. I think you could try it then if it didn't work you would still be able to flash it through the flash tool.

Famineuk said:
This is great work. Have you got a version of this that works with the latest firmware? I upgraded my firmware to the June v10 firmware and when I put this version on it just boot loops the phone.
Thanks.
Click to expand...
Click to collapse
Where did you get the v10 ?
i got v9 OTA, but no v10
have you used the one from needrom ? i see no other source.

Root is possible with KingoRoot (NOT Kingroot)

johnfdoe said:
Where did you get the v10 ?
i got v9 OTA, but no v10
have you used the one from needrom ? i see no other source.
Click to expand...
Click to collapse
This is a link to version 10
http://www.needrom.com/download/cubot-s550/

Will an update using the flash tool erase the internal memory of my phone(titanium backup, photos, etc)? Can I update to V10 using TWRP recovery or do I have to use the flash tool again?

baggos12 said:
Will an update using the flash tool erase the internal memory of my phone(titanium backup, photos, etc)? Can I update to V10 using TWRP recovery or do I have to use the flash tool again?
Click to expand...
Click to collapse
Only Flashtool to upgrade.
You may try to maintain Data if in flashtool you will deselect Userdata partition before start flashing (and Recovery partition if you want to maintain TWRP).
You loose root and it will be not guaranteed that with new v10 rom TWRP will work again (possible change in kernel)

megthebest said:
Only Flashtool to upgrade.
You may try to maintain Data if in flashtool you will deselect Userdata partition before start flashing (and Recovery partition if you want to maintain TWRP).
You loose root and it will be not guaranteed that with new v10 rom TWRP will work again (possible change in kernel)
Click to expand...
Click to collapse
you have twrp for s550

[Recovery][ZE500KL] TWRP 3.0.2-0 Recovery (UNOFFICIAL) Marshmallow 6.0

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download
https://github.com/sabpprook/android_device_asus_ze500kl/releases
Install
reboot fastboot
Code:
adb reboot bootloader
boot TWRP recovery image
Code:
fastboot boot twrp-3.0.2-0-ze500kl.img
flash recovery image in TWRP (optional)
Notice: This TWRP will automatically unlock bootloader
Source Code
https://github.com/sabpprook/android_device_asus_ze500kl

Nice work,bro!
Thank you very much!

Have anyone tried to flash it using flashify?

Jhyrachy said:
Have anyone tried to flash it using flashify?
Click to expand...
Click to collapse
Yes,work

It works. But i was unable to install a ROM ZIP file from ASUS Website. It says that the zip file is for WW_PHONE (I know !!) but my phone is a OMNI_ZE500KL.. What ?? What is this ? Never heard about this before. My problem is here :
http://forum.xda-developers.com/zen...ng-rom-zip-asus-ze500kl-t3302389#post65465004

@sabpprook:
Hey buddy, can I ask what your /init.restore.sh is doing and what is it's point?
https://github.com/sabpprook/androi...lob/android-5.1/recovery/root/init.restore.sh

LuK1337 said:
@sabpprook:
Hey buddy, can I ask what your /init.restore.sh is doing and what is it's point?
https://github.com/sabpprook/androi...lob/android-5.1/recovery/root/init.restore.sh
Click to expand...
Click to collapse
there is a trick on this phone when you boot not official boot or recovery image,
it will get stuck in boot logo if you reboot.
the solution is to restore aboot-bak to aboot partition, so that's what i did in "init.restore.sh" script.

sabpprook said:
there is a trick on this phone when you boot not official boot or recovery image,
it will get stuck in boot logo if you reboot.
the solution is to restore aboot-bak to aboot partition, so that's what i did in "init.restore.sh" script.
Click to expand...
Click to collapse
I'd suggest using /dev/block/bootdevice/by-name/aboot instead.
Sent from my ASUS_Z00TD using Tapatalk

Fus_XDA said:
It works. But i was unable to install a ROM ZIP file from ASUS Website. It says that the zip file is for WW_PHONE (I know !!) but my phone is a OMNI_ZE500KL.. What ?? What is this ? Never heard about this before. My problem is here :
http://forum.xda-developers.com/zen...ng-rom-zip-asus-ze500kl-t3302389#post65465004
Click to expand...
Click to collapse
Do not flash official ROM zip in TWRP recovery, try it in official recovery or modify the ROM zip script.

I cannot decrypt my storage using this

sabpprook said:
Do not flash official ROM zip in TWRP recovery, try it in official recovery or modify the ROM zip script.
Click to expand...
Click to collapse
I am not an android program-maker. I don't know anything about that. I will wait for an custom rom. As I posted here http://forum.xda-developers.com/zen...ng-rom-zip-asus-ze500kl-t3302389#post65465004, Original recovery is unable to flash. It's weird !!!
Anyway, very good job for this twrp. It gives me hope !!!

This TWRP, suitable for ZE500KG ?

Please,
I was waiting so long (2 months now, i check almost every day) for a custom ROM to flash my ZE500KL, but it seems that no developper is interested to build it... so, please, is there anyone who own a ZE500KL (of course, a working device ), who can do a TWRP backup, who can upload it in a server (in zip or rar), so i can download it and do a restore to my poor device ? Please
Thank you :fingers-crossed:

Fusxda said:
Please,
I was waiting so long (2 months now, i check almost every day) for a custom ROM to flash my ZE500KL, but it seems that no developper is interested to build it... so, please, is there anyone who own a ZE500KL (of course, a working device ), who can do a TWRP backup, who can upload it in a server (in zip or rar), so i can download it and do a restore to my poor device ? Please
Thank you :fingers-crossed:
Click to expand...
Click to collapse
Join #titandev @ freenode or add me on hangouts ( https://plus.google.com/108108436166506337243 ) I will help you restoring stock ROM.

Fusxda said:
Please,
I was waiting so long (2 months now, i check almost every day) for a custom ROM to flash my ZE500KL, but it seems that no developper is interested to build it... so, please, is there anyone who own a ZE500KL (of course, a working device ), who can do a TWRP backup, who can upload it in a server (in zip or rar), so i can download it and do a restore to my poor device ? Please
Thank you :fingers-crossed:
Click to expand...
Click to collapse
Thank you in advance :good:
The best i've done till now is to :
- download the .222 stock rom from Asus
- Extract it, and edit the update-script to remove the 4 first line talking about device kind
- Recompress in ZIP and flash through this TWRP 3.0.0.0 (it's weird that stock recovery can't flash the original ZIP) ==>> no more error device, it said that it succeed
But it don't really fix all problems :
- The device is booting and i can access the welcome screen, but either it stucks and reboot automatically after 3 or 4 minutes, or stucks and i have to remove battery, or i have a lot of errors like "goggle play stopped" or "process.xxxx stopped" or something like these
All details concerning the problem is there http://forum.xda-developers.com/zen...ng-rom-zip-asus-ze500kl-t3302389#post65465004

Tested and Flashed on a ZE500KG, It works flawlessly!

Forgive me if this is a noob question, but does this also work on ZE551KL, or should I stick with this one

wow, it's sweet.
maybe it's time for coming back for ZE500KL.

Cyanogenmod
I'm waiting for a cyanogenmod rom for asus zenfone 2 laser ze500kl.....please give me the link for working cyanogenmod rom.....thanks in advance......

aepio said:
I'm waiting for a cyanogenmod rom for asus zenfone 2 laser ze500kl.....please give me the link for working cyanogenmod rom.....thanks in advance......
Click to expand...
Click to collapse
There's no CM for it.
Sent from my ASUS_Z00TD using XDA Labs

[RECOVERY][SCORPIO] TWRP 3.2.1-0 v2 Touch Recovery for Mi Note 2 [26.02.2018]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TEAM WIN
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
DOWNLOAD
TWRP 3.2.1-0 v2
CHANGELOG
TWRP Changelog
INSTRUCTIONS
From fastboot:
Code:
fastboot flash recovery filename.img
From TWRP:
- Install>Flash Image>"Select the recovery to flash">Swipe To flash>Reboot Recovery
NOTE: If the recovery asks you for a password, you have to erase the /data partition. So press "Cancel" and then Wipe>Format Data>"yes" to fully decrypt your phone. Note that a decrypted phone will boot more faster and will improve the FS speed.
THIS WILL ERASE YOUR INTERNAL STORAGE
F.A.Q
Q: Can i flash MIUI ROMS with this recovery?
A: Yes, you can. If you flash an official MIUI ROM, you have to flash Magisk or Boot Image Patcher too, to disable the dm-verity and forced encryption.
Q: Can i flash custom ROMS with this recovery?
A: Yes, you can. This recovery is Oreo ready too.
Source Code: GitHub​

Just thanks @Psy_Man, you are the best bringing news for MI Note 2.
And as always waiting for Oreo.

Works just fine on my Mi Note 2. Thank you!

Nice to see the new Twrp on our device. Thank you very much and keep up the good work !

Do i need to format it in order to decrypt?

Andrikkos said:
Do i need to format it in order to decrypt?
Click to expand...
Click to collapse
Yes! Backup your data first!

Nice ! The new version is already up ! Thank you for all the work you are doing , you are amazing !

You are the best @Psy_Man thank you very much.

3.2.1 cant load ..

Andrikkos said:
3.2.1 cant load ..
Click to expand...
Click to collapse
Broken download. Check the md5 before flashing somethimg.

Pixel Expiriance
When are you making that rom working ?

dont work for me ...
reboot on recovery ok , fastboot ok but no reboot on rom ???

dglingos said:
dont work for me ...
reboot on recovery ok , fastboot ok but no reboot on rom ???
Click to expand...
Click to collapse
What?

I'm having problems flashing official roms trought recovery, I don't know why. It seems to flashing ok but when the phone reboots it doesn't loads it got stucks at MI logo and nothing happens. Does anybody has this problem?

jorvacf said:
I'm having problems flashing official roms trought recovery, I don't know why. It seems to flashing ok but when the phone reboots it doesn't loads it got stucks at MI logo and nothing happens. Does anybody has this problem?
Click to expand...
Click to collapse
As i know , PsyMan said in the thread that when you install the official rom you need to flash either Magisk either Boot Image Patcher for it to boot.

Hi, this twrp version asks for a password (for decrypt purpose) ; why ? There was no password prompted in 3.1.0.0 .. My Mi Note 2 is not encrypted and obviously I don't want to format /data.

niczob said:
Hi, this twrp version asks for a password (for decrypt purpose) ; why ? There was no password prompted in 3.1.0.0 .. My Mi Note 2 is not encrypted and obviously I don't want to format /data.
Click to expand...
Click to collapse
Then flash 3.1.1 again and problem solved. Also , your data is password protected and everytime you start your rom it has to take some time to "unlock" your data partition. This way , if you format woth the new twrp, you will have a great increase in bootup speed.

alexmanu1 said:
As i know , PsyMan said in the thread that when you install the official rom you need to flash either Magisk either Boot Image Patcher for it to boot.
Click to expand...
Click to collapse
Let me see if I understand, I need to flash magisk and also boot imagen patcher? Where can I get this last one (boot imagen patcher) and it has to be done after flashing the ROM without restarting it?

jorvacf said:
Let me see if I understand, I need to flash magisk and also boot imagen patcher? Where can I get this last one (boot imagen patcher) and it has to be done after flashing the ROM without restarting it?
Click to expand...
Click to collapse
One of them . I recommend Magisk , don't really know which boot image patcher should we install.

jorvacf said:
I'm having problems flashing official roms trought recovery, I don't know why. It seems to flashing ok but when the phone reboots it doesn't loads it got stucks at MI logo and nothing happens. Does anybody has this problem?
Click to expand...
Click to collapse
I have the same problem