{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This Kernel Is A Combination Of Many Great Developers Work
A Small Introduction :
This kernel is for AOSP/CM Based ROMs only! and it's for Android Kitkat 4.4.4
It doesn't contain any recovery in it, so the recovery you have won't be changed
And it is basically a mixture between some kernels like (Pimped/Mosh/DooM)
Many more features from many other kernels will be added as well maybe soon
I'll try to keep providing updates, at least every three days (minor updates)
Main Features :
Faux123's Features (Aka: Paul Reioux) :
IntelliPlug: Intelli Plug Hotplugging Driver V3.8
Sound Control: GPL Sound Control v3.6
PowerSuspend: Power Suspend driver v1.5
Async Fsync: Asynchronous file sync
Dynamic Fsync: Dynamic File Sync v1.5
Snake Charmer: CPU frequency limiter driver v1.2
Fast Charge: Allows to set the Amperage of the Charger
CPU Boost: CPU Input Boost module
Overall Stats: CPU Overall Stats on a Per-Core Basis
Governers: Intelliactive & Intellidemand v5.0
DooMLoRD's Features :
Color Calibration Control: gives full control over the RGB display channels
zRam: Support For zRam Memory Compression
Governers: Wheatley
I/Os: FIOPS (Fair Input/Output Per Second)
Androguide's Features (Aka: Louis Teboul) :
CPU Freq: Extra Steps At 2.15GHz & 345MHz
Governers: Pegasusq & Nightmare & Hyper
I/Os: SIO (SImple Ondemand)
CoolDevelopment's Features :
CPU UnderClocking: Down to 268MHz
F2FS: Samsung's F2FS nand-optimized file system support
ExFAT: Samsung's open-source exFAT driver V1.2.7
fxTHaxxorX's Features :
CPU OverColcking: Added CPU OC Steps 2.49GHz & 2.72GHz
Early_Suspend_Delay: Delay fbearlysuspend to allow CRT off animation to be displayed
Governers: SmartAssH3 & Adaptive & DanceDance & SavagedZen
I/Os: Zen & Tripndroid
Various Developers :
CPU Voltage Control: Set Voltage for every CPU Clock [by imoseyon]
MSM_Sleeper: Sets the Max CPU Frequency When Screen is Off [by flar2]
Compression: XZ Compressed & LZ4 compression support [by Kyungsik Lee]
SLIMbus: Increase rootfreq 24.526MHz -> 27+MHz & clock-gear 7 -> 10 [by franciscofranco]
CPUQuiet: cpu hotplug drive (disabled mpdecision automatically) [by maxwen]
I/Os: VR & BFQ (Budget Fair Queueing) [by krabappel2548]
Governers:
InteractiveX2 & SmartassV2 & Lagfree & Lionheart & Badass (by krabappel2548)
Alucard [by Alucard24]
My Touches :
Linux Version: Updated Linux Version of the Kernel to 3.4.5
OC/UC CPU: Allow UnderClocking to 268MHz Mhz While OverClocking to 2.49GHz & 2.72GHz
Toolchain: Built with Latest Linaro GCC 4.9.2-2014.10 Toolchain With A15 Optimizations
Many Developers of the Mentioned above have much more contributions in this kernel, but it's hard to mention it all
Download Folder :
Disclaimer :
Code:
# Neither me or any contributors to this kernel can nor will be held
# responsible for any damage or any kind of problem related to its use.
# You are using this piece of software AT YOUR OWN RISK.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
Sources :
Credits :
Thanks to Androguide.fr for all Pimped related features in this kernel
Thanks to oshmoun he helped me a lot to get this kernel to be as great as it is now
Thanks to CoolDevelopment for all Mosh related features in this kernel
Thanks to faux123 for all his contributions to the android kernel community, many of which are implemented here
Thanks to showp1984 for his msm_mpdecision hotplug driver
Thanks to DooMLoRD for all the cherry-picked features from his DoomKernel
Thanks to krabapel2458 for the inital port from DoomKernel of features like GPU OC, some governors and more.
And of course, thanks to FreeXperia and Kali- in particular, for the device bring-up
XDA:DevDB Information
GreatDevs Kernel Kitkat - Honami, Kernel for the Sony Xperia Z1
Contributors
OmarEinea, oshmoun
Source Code: https://github.com/GreatDevs/android_kernel_sony_msm8974
Kernel Special Features: 2.72GHz OC | 268MHz UC | Voltage Control | F2Fs | Sound Control | Color Control | FastCharge | Govs & I/Os | IntelliV3.8 | LZ4-compressed | Alucard HotPlug | PowerSuspend | CPU Frequency Limiter | CPU Quiet | FSync | Futex Tweaks | Optimizations
Version Information
Status: Beta
Current Beta Version: V1
Beta Release Date: 2014-11-08
Created 2014-11-01
Last Updated 2015-04-05
ChangeLog & To-Do-List
ChangeLog :
Version 1:
2014-11-08 :
Add CPU OverColcking Steps 2.49GHz & 2.72GHz [by fxTHaxxorX & Huge Thanks to oshmoun]
Replace CM's boot logo with GreatDevs' Black Boot Logo
Update Kernel's Linux Version 3.4.0 -> 3.4.5
Add new SmartAssH3 & Adaptive Governors [by fxTHaxxorX]
Add new I/Os Zen & Tripndroid [by fxTHaxxorX]
Cleaned up kernel's name from those creepy numbers [thanks fxTHaxxorX]
CM Upstream
2014-11-03 :
Update IntelliPlug v2.0 -> v3.8
Add new SavagedZen & DanceDance Governors [by fxTHaxxorX]
Add Early Suspend Delay [by fxTHaxxorX]
Disable mpdecision by default, so now only CPUQuiet works by default [thanks oshmoun & CoolDevelopment]
Probable fix for those who are having bootloop (try and let me know) [thanks oshmoun]
2014-11-01 :
Update Sound Control v3.5 -> v3.6
Enabled CPUQuiet for Balance Governor [by oshmoun]
Use Default CPU Freq as: 268.8MHz Min & 2.26GHz Max
Follow Up For Some Camera Related Stuff (Fixes Camera Bug On Some ROMs) [by oshmoun]
Start Supporting Honami & Togari
2014-10-31 :
Initial Release
To-Do-List :
Update kernel linux version gradually from 3.4.0 to 3.4.104
Update all old features from other kernels
Dig around for some new features
Make a nice and clean build that should be called stable
Kernel is beta so don't expect it to be perfect or near that
Additional Add-ons
Replace Your Logo :
As shown in the attachments, these are the three logos of GD kernel, chose the one you like to become your boot logo,
and if you want the stock CM boot logo, you can have it as well, Download links for all four packages can be found here:
Logo Replace Packages Download Folder
Old GD Logo:
Whaaaat? A new thread? A new kernel? No. It's @OmarEinea :laugh:
Downloading and testing
As always, great job and thanks for your time :good:
--------------------------------------------------EDIT--------------------------------------------------
31-10-2014 release works fine, but the other one give me status 6 error with cwm.
Solved by using updater-script of first release
One more thing I saw Sony Z1 Compact on recovery (nothing to worry about)
OmarEinea said:
Make this thread more beautiful!
Update kernel linux version gradually from 3.4.0 to 3.4.104
Update all old features from other kernels
Dig around for some new features
Make a nice and clean build that should be called stable
Kernel is beta so don't expect it to be perfect or near that
I have enabled 2.4GHz and if it's stable enough I can enable 2.7GHz if anyone's interested
Click to expand...
Click to collapse
Please, include latest Intelliplug v3.8 and latest @faux123 goodies..
Destroyedbeauty said:
Please, include latest Intelliplug v3.8 and latest @faux123 goodies..
Click to expand...
Click to collapse
I'm doing that gradually, just be patient
Regards,
Omar.
[Fenix] said:
31-10-2014 release works fine, but the other one give me status 6 error with cwm.
Solved by using updater-script of first release
One more thing I saw Sony Z1 Compact on recovery (nothing to worry about)
Click to expand...
Click to collapse
Oops, My bad, it's I'll fix that right away.
Regards,
Omar.
Fixed!, please download build [Nov-1] again and report back
Regards,
Omar.
OmarEinea said:
Fixed!, please download build [Nov-1] again and report back
Regards,
Omar.
Click to expand...
Click to collapse
thanks for this great kernel and yes its working fine and the 2.419 mhz is totally stable i even can undervolt this -25mv without any problems and i would not mind to have the option to run the phone at 2.7ghz
Thanks a ton dev!
Gonna be giving it a try in a day for sure. Man this was all that was missing in Android Original Dev sections.
Great work!
P.S. What I actually liked the most was the humility that is expressed in the name of the Kernel, re affirms my be belief in humanity.
I tried to use OC (2419) with pimp my z1 app but it wouldn't stay on it (went back to 2260, tried it several times) other than that it's great! ty
im going to try it (finally a cm kernel thats under development ) and i would like 2,7GHz
ps is it only for cm or aosp too ? there are nearly same ...
Finally.. Can thank u enough Omar
---------- Post added at 01:30 AM ---------- Previous post was at 01:20 AM ----------
Download link Fix Please ..
abbychauhan said:
Finally.. Can thank u enough Omar
---------- Post added at 01:30 AM ---------- Previous post was at 01:20 AM ----------
Download link Fix Please ..
Click to expand...
Click to collapse
It's showing a sorry message by the file host server!
Apologize for any dropped downloads from the IL Server just now. There was a 45 second network drop with one of the network peers. This has been fixed. Apologize for the inconvenience
Click to expand...
Click to collapse
It seems ok now though, I'll also start mirroring the kernel in download section of the thread
Regards,
Omar.
OmarEinea said:
It's showing a sorry message by the file host server!
It seems ok now though, I'll also start mirroring the kernel in download section of the thread
Regards,
Omar.
Click to expand...
Click to collapse
Thanks a lot! Can't wait to test this ?
Seems Stable already. No problems with Settings not Sticking on boot. Using Faux app and DARKCM ROM
I'm testing
runs so far without problems
many thanks
Thanks for this amazing kernel!
Just one question:
Can you make a version tht works with SlimKat?
:fingers-crossed:
Got a random reboot, phone was connected to PC, screen off.
last_kmsg here: http://gw.gd/NoCL
Hi tried out the new kernel but in my case bad news - no boot of phone display stays off and red led on
Flashed back CM11 boot.img and device is ok.
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am not responsible for any damage to your phone.
Read before downloading or posting in the thread:
Proceed with caution if you have no experience.
PGM is supported
--- if you have problem report this to Developer Thread! ---
Please post oll the OFFTOPIC questions here:
[Off-Topic] - [AK kernel] - Silverdrag2
Please post oll the QUESTIONS here:
[FAQ] - [AK Kernel 101 - Questions and Answers] - Khizar
Before Posting problems with kernel read this guides:
[HOW TO] - [Post Kernel last_kmsg] - Ciprianruse88
[REF] - [Galaxy Nexus 4.2.x tips & trick] - Samersh72
[Guide] - [How To Logcat] - Khizar
[GUIDE] - [Undervolting The Right Way] - Klathmon
[GUIDE] - [SmartReflex and Undervolting] - Szucsgf
[HOW-TO] - [Using init.d scripts] - Stevensoaj
--- Bug Report Readme and How to ---
Step1:
Download script manager (Direct Link)
Step2:
Run as root /data/ak/create_bugreport.sh
Step3:
Open /sdcard/bugreport_YYYYMMDD_HHh_MMm_SSs.tar.bz2 and verify the presence of dump
Step4:
Collect these infos:
kernel version
rom version
governor
scheduler
freq cpu
freq gpu
undervolt
ecc ... ecc ...
short description of the problem
Step5:
Submit On thread for the analysis
Special thanks and donations are made to "[email protected]" creator of the server hosting "http://beta.androidfilehost.com/"
Thanks goes to the following people.
what exists in this kernel was created by learning from their thread:
renaudallard https://github.com/renaudallard
faux123 https://github.com/faux123
franciscofranco https://github.com/franciscofranco
imoseyon https://github.com/imoseyon
morfic http://morfic.euroskank.com/git/
Ezekeel https://github.com/Ezekeel
dorimanx https://github.com/dorimanx
voku https://github.com/voku
gokhanmoral https://github.com/gokhanmoral
DerTeufel https://github.com/DerTeufel
stratosk https://github.com/stratosk
sonicxml https://github.com/sonicxml/furry-octo-lana
Brandon Berhent https://github.com/AndroidDeveloperAlliance
Humberos https://github.com/humberos
Bhanvadia https://github.com/bhanvadia
Boype [email protected]:boype/kernel_tuna_jb42.git
and all the people who contribute to the development of android.
If you appreciate my work and that of the guys who work with me donate $ 1 no more.
This money will be used to help maintain and all that is needed to continue the development of the AK kernel.
Are not used for me but will be donated to turn to those who contribute.
[4.2.1 - 4.2.2] DIAMOND (EXPERIMENTAL)
dev-host - Last Version: AK.256.SKL.zip
Differential Changelog: Link
Features: Link
Github: Link
[4.2.2] KUBO (STABLE)
Latest Version: Link
NB:
This version is compiled to try to keep a line with a stability
All credit and thanks goes to:
BigBrother1984
HOSTING SERVER FOR ALL VERSIONS
Old Kernel version download (androidfilehost): Link
Old Kernel version download (dev-host): Link
RESET TO STOCK KERNEL - 4.2.1
cwm-boot-JB.Stock.Kernel-JOP40C.zip
RESET TO STOCK KERNEL - 4.2.2
cwm-boot-JB.Stock.Kernel-JDQ39.zip
You can use this thread for all infos and doubt (click on users for direct link):
[WALLPAPERS] [LOGO SIGNATURE] - [AK KERNEL] - Ciprianruse88
[GUIDE] - [CPU Governors & I/O Schedulers] - MBQsniper
[FIX] - [Optimum Color Control Values] - Arzbhatia
[How-to] [FAQ] - [Paranoid Android 101] - Khizar
[GUIDE] - [How to keep sdcard format same after upgrading to 4.2] - Khizar
[GUIDE] - [Building your first Kernel] - Thewadegeek
[GUIDE] - [Create a Kernel Building Script] - Ayysir
[REF] - [Galaxy Nexus ROM / kernel combination comparison] - Charmacas
New fantastic tutorial for compile a persona Kernel:
[TUTORIAL] - [Complete Galaxy Nexus Kernel Development] - Climber Ty
Don't forget to press Thanks and Rating button!
xXx - Evil Add On
My daily driver ROM is (click on logo):
DroidTh3ory:
This is AXI0M.. Its Rebirth.
Feature filled ROM based on speed.
Contains Mods, Features, and Code from EVERYWHERE.
Build Details: AOSP 4.2.2 Compiled Using Linaro 4.7 Toolchain and -03 Optimizations
Krait Optimizations
Cortex A9 Optimizations
Bionic Optimizations
and a lot of others fck features ......
Thanks a lot to
DroidTh3ory
INFOS AND GUIDES:
New Guide is online click on Image:
[MOD][KERNEL][4.2.X][BOOTLOGO] Add a Boot Logo like SGS1 to your Gnex Kernel
AK Review (click on logo):
A lot of thanks to:
Nicuz95
All info and guides on the kernel can be found at the following link:
AK WIKI PAGE
xXx - Experimental Kernel Version
INTRODUCTION:
--- This kernel version is experimental in continuous evolution ---
it has all the features characteristic of the AK.
And 'suitable for those who like to have a super updated kernel.
NB:
PGM is supported
--- if you have problem report this to Developer Thread ---
* Works on:
4.2.1 - 4.2.2
AOSP and CM ROMs
Linux 3.0.80+
Based on JB Stock Kernel
Ramdisk Compatible with CM-10.X and AOSP-4.2.2
Compiled with New Linaro 4.7.3-2013.04.15
Linaro -O3 Optimizations
KERNEL OPTIONS:
Revert --- Wifi Drivers ---
from 3.4 to Old:
WEP don't work anymore with new drivers
Bcmdhd: Version 1.88-16
NB:
Do you want to restore old kernel or another kernel? Before flash you have to do:
Step1: Download script manager (https://play.google......scriptmanager)
Step2: Disable Wifi, Tethering ecc ...
Step3: Run as root /data/ak/recovery_wpa_hostapd.sh
Step4: Goto to recovery and flash your new kernel
or
Flash this ZIP from recovery:
ak.restore.OLD.WIFI.zip
Enable --- Frandom ---
support at Boot:
Link to Technical info for Frandom
Step1: copy from /data/ak/init.d/98frandom to init.d folder
Step2: set permission to +x and owner to root:shell
Step3: reboot
Enable --- Ksm ---
without app:
Link to post with instructions
Link to wiki page for technical info
Thanks lisan
Enable --- Zram ---
Step1: Run /data/ak/backup/zram_imoseyon.sh with scriptmanager
Step2: check if it work by do command --- free --- from terminal
Fix for --- wifi drops ---
Enable Wifi High perf in trickster
Disable wifi optimizations from settings
Disable Avoid poor connections
KERNEL FEATURES:
Governors:
Interactive from 3.4.X Kernel (Default) with Early Suspend when screen goes Off
Conservative with Early Suspend cpu1 when screen goes Off
Ondemandplus
Ondemand
Wheatley
Performance
Powersave
Userspace
Hyper
Lazy
Hotplug Governors:
Abyssplug
Hotplug
Sakuractive
NB
... i'm not responsible for any crash ...
... Use at own risk ...
... it is known that they are unstable when used on architecture tuna / omap / mpuss ...
IF YOU WANT TO USE HOTPLUG FEATURE YOU HAVE TO SET:
MIN FREQ =MIN ON FREQ
(EXP: MIN FREQ = 350 and MIN ON FREQ = 350)
(EXP: MIN FREQ = 230 and MIN ON FREQ = 230)
... Hotplug governors are compiled as Modules ...
If you want to use do:
adb shell
cd /system/lib/modules
insmod <governor_name>
* Schedulers:
Row (Default and Optimized)
Bfq, Fifo, Vr, Sio, Cfq, Noop, Deadline, Fiops
* Read Ahead Buffer Size:
512/32
* Cpu Freqs:
350Mhz (Default Min)
1200Mhz (Default Max)
+180Mhz
+230Mhz
+525Mhz
+810Mhz
+1350Mhz
+1350Mhz
+1420Mhz
+1480Mhz
+1560Mhz
+1640Mhz
* Gpu Freqs:
384Mhz
* TCP Congestion:
Westwood (Default)
Cubic, Bic, Westwood, Htcp, Hstcp, Hybla, Vegas, Scalable, Lp, Veno, Yeah, Illinois, Reno
* Others Features:
Enabled IVA 500Mhz95iosettings - Thanks Franco Team
Dynamic Ftrace
Dynamic Readahead
Linux BootLogo Support
Last Wifi Drivers 3.4.x kernel
Interactive Governor from 3.4.x Kernel
Wifi Patch from 3.4.x Kernel
CPU Topology
AK Color palette
Content Adaptive Brightness
OTG Host Mode On Charge
Ksm support
Dynamic Fsync Control
Voltages Control (Core, Iva, Mpu and more ...)
Blx control
Fastcharge control
High performance audio
Sound Boost control
Temp control
Vibrator control
Color Control
Gamma Control
Trinity Contrast
Frandom Optional
Low Memory Killer from 3.4 Linux Kernel
Net and Bluetooth Update - Thanks Lioux
FQ Codel Enabled
CIFS Support
Scheduler Autogroup
Oom Patches
Optimizations:
Add Osmosis Scheduler optomizations
create_bugreport.sh Script Ext4 Mount Optimization
Ext4 Fs with Discard Option
Ak PowerHal Compiled from Source
Create a report of status at boot (data/ak/ak-boot.log)
Zipalign at Boot
Enable Frandom at Boot
Auto Create init.d folder if not present
init.d Support
Sysctl Vm Optimizations at boot
Wipe Cache and Dalvik First Boot
Clean old Kernel Files First Boot
Pngs Charging Image Ak Style
XZ Compression
USB OTG Mount
... ecc .. ecc ...
Scripts present into --- /data/ak/ ---:
--- create_bugreport.sh ---
All thanks to Lioux
If you lunch this script you can collect all the infos for trouble problems with kernel:
last_kmsg
logcat
uname
dumpsys
ecc ...
--- frandom_test.sh ---
With this scripts you can test frandom/urandom bench
--- recovery_wpa_hostapd.sh ---
With this script you can revert to old wifi drivers
--- 98fq_codel ---
init.d script for enable FQ codel net scheduler
--- 98frandom ---
init.d script for enable Frandom
xXx - Kernel Differential Changelog
AK SKL 256
DIFFERENTIAL CHANGELOGS
NB:
PGM is supported
--- if you have problem report this to Developer Thread! ---
Project name: AK KERNEL
•anarkia1976 - Kernel Version: AK.256.SKL
3.0.80+
Revert fcharge Patches Project name: AK KERNEL
•anarkia1976 - Kernel Version: AK.255.SKL
•anarkia1976 - Kernel Version: AK.013.EXP
•Joshua Wise - fastchg: Only enable fast charge GPIO as long as we actually have some charging to do.
•Joshua Wise - fastchg: Remove vestigial fsa9480 "force AC" switch.
•Joshua Wise - fastchg: change fast charge to override the high current GPIO, not the USB cable mode
•Tatyana Brokhman - block: urgent: Fix dispatching of URGENT mechanism
•Tatyana Brokhman - block: urgent request: Update dispatch_urgent in case of requeue/reinsert
•Paul Reioux - rq_stats: changing the show function for sysfs entry def_timer_ms
•Paul Reioux - rq_stats: set rq_info.init after initializing rq_info attributes
•Dmitry Shmidt - net: wireless: bcmdhd: Close p2p0 device in wl_down
•anarkia1976 - Kernel Version: AK.012.EXP
•anarkia1976 - tuna_ak_defconfig: LOGLEVEL=7
•anarkia1976 - Kernel Version: AK.011.EXP
•H Hartley Sweeten - lib/sha1.c: quiet sparse noise about symbol not declared
•Linus Torvalds - arm: remove "optimized" SHA1 routines
•Mandeep Singh Baines - lib/sha1: use the git implementation of SHA-1
•Colin Cross - hardlockup: detect hard lockups without NMIs using secondary cpus
•Xiaobing Tu - tty: hold lock across tty buffer finding and buffer filling
•Vijayavardhan Vennapusa - USB: f_mtp: Fix corner cases in MTP driver while syncing
•Jin Hong - arm: show present cpu instead of online cpu in /proc/cpuinfo
•anarkia1976 - Kernel Version: AK.010.EXP
•Colin Cross - freezer: shorten freezer sleep time using exponential backoff
•Francisco Franco - cpufreq: interactive: fix derp of from latest commit. Original author of last commit has been notified to fix it upstream.
•Lianwei Wang - cpufreq: interactive: fix race on cpufreq TRANSITION notifier
•Lianwei Wang - cpufreq: interactive: don't schedule timer on offline cpu
•Lianwei Wang - cpufreq: interactive: resched timer if max freq raised
okay... i'm D/Ling now... Let's see what this bad boy does...
Thanks , just flashed it with PA
Just one question , is there a way to use CPU at 1200? With Trickster I have 920 or 1350
Thanks for your work
Compatible with pgm?
cpu
The base frequencies are:
180
350
700
920
1350
1520
I have changed 1200Mhz ... to 1350Mhz ... little boost to phone operation.... with a little battery energy small ..
It's up and running!
Sent from the best iPhone YET!!
"The Galaxy Nexus"
anarkia1976 said:
The base frequencies are:
180
350
700
920
1350
1520
I have changed 1200Mhz ... to 1350Mhz ... little boost to phone operation.... with a little battery energy small ..
Click to expand...
Click to collapse
OK thanks I hope my battery won't feel too bad
pgm
no ...
ceejay83 said:
Compatible with pgm?
Click to expand...
Click to collapse
I'm affraid it is not. I get a message about the module can't load
Hi anarkia!Nice to see you in the gnex's thread!
soon as I can I will try your new job ... for the moment thanks
Inviato dal mio Galaxy Nexus con Tapatalk 2
nice to see another good work here!
but so many versions,which one should be the best one for me?
nice kernel and really nice minimal choice! :highfive:
there's no need for mine
no pgm support is a show-stopper.
i have never used PGM,
if you want a minimal kernel with no debug options enabled you must deal with it.
thanks
RcrdBrt said:
i have never used PGM,
if you want a minimal kernel with no debug options enabled you must deal with it.
Click to expand...
Click to collapse
i have updated thread with your github ...
RcrdBrt https://github.com/RcrdBr
AK.006 milestone is great with CM10 M1!
TricksterMod app doesn't work it gives me FC every time I try to open it. Running Franco's kernel app and CM10 color settings.
Thanks for your work!
gianton said:
AK.006 milestone is great with CM10 M1!
TricksterMod app doesn't work it gives me FC every time I try to open it. Running Franco's kernel app and CM10 color settings.
Thanks for your work!
Click to expand...
Click to collapse
Have you try restart Of phone after FC?
Sent from my Galaxy Nexus using xda app-developers app
PLEASE NOTE: THIS KERNEL IS ONLY FOR THE SM-N910F and SM-N910G VARIANTS OF THE SAMSUNG GALAXY NOTE 4
NOTE 2: THE LOLLIPOP RELEASES ARE ONLY FOR THE N910F VARIANT FOR NOW
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
NOTE 3: BEFORE FLASHING THE LOLLIPOP VERSIONS OF AEL KERNEL READ HERE
N4 AEL Kernel FEATURES:
Code:
[B][COLOR="DarkRed"]* Made with SM-N910F_EUR_KK_Opensource_Update1
* Full Synapse control [UpInTheAir is DA MAN!!]
[NOTE: Synapse support is ONLY available in the KK versions of AEL Kernel]
* Built with the incredible Saber Mod 4.10 Toolchain [KK versions]
* Built with Linaro 4.9.3 (2015.02) Cortex A15 Toolchain [LP Versions]
* Updated to Linux Kernel Base 3.10.5 [KK Versions]
* Linux 3.10.40 [LP Versions]
* CPU Overclock up to 2.89 ghz
(4 OC Steps: 2.68, 2.76, 2.84, 2.89)
* CPU Underlock down to 268 mhz
* Hack to allow non original SView Covers to access all the SView Features!! [twistedumbrella]
[Only available in KK Versions]
* Faux Sound Control [Pafcholini, Faux123]
* Hardlimit Control [Yank555.lu and twistedumbrella]
* Voltage Control
* Intelliplug v3.8 (faux123)
* Intellithermal (faux123)
* Additional Governors: Lionheart, Umbrella_Core, Bluactive, Intellimm, Interactive_Pro, Bioshock, OnDemandPlus, DanceDance, SmartMax, Yankactive, Wheatley,
SmartAssv2, Intelliactive, Darkness, Nightmare, ConservativeX, Alucard, Adaptive
* Additional I/O Schedulers: zen, sio, vr, fifo, fiops, bfq
* Powersuspend v1.5 ( Yank555.lu & faux123)
* LED Brightness Control
* Sweep2Sleep Hack
* USB Keyboard/Mouse Hack
(Use your phone as a keyboard and/or mouse)
* Patched for compatibility with DriveDroid app
(Flash .iso images to your pc from your phone!! No more need for usb sticks or dvd's or cd roms)
* Fast Charge v1.2 [Yank555.lu]
* MDNIE (Color) Control [Yank555.lu and twsitedumbrella]
[Only available in KK Versions]
* Trinity Colors
* STEREO CALL RECORDING SUPPORT
* Overclocked Slimbus for a better overall sound experience
* Simple GPU Algorithm
* Dynamic FSync Control
* Fixed Simple_OnDemand GPU Governor crash
* Added Frandom
* Enabled CIFS Support
* Enabled and Optimized ksm (Kernel Samepage Merging)
* Enabled Gentle Fair Sleepers
* ENABLED ADVANCED TCP CONGESTION AND A LOT OF MORE OTHER TCP's
* Permissive, with init.d support[/COLOR][/B]
DOWNLOAD LINKS:
NOTE 4: BEFORE FLASHING THE LOLLIPOP VERSIONS OF AEL KERNEL READ HERE
ECHOE DEVELOPMENT/DOWNLOAD CENTER
CREDITS and THANKS:
*twistedumbrella
*Faux123
*Yank555.lu
*ktoonsez
*UpInTheAir (you are an amazing person!!)
*Pafcholini
*showp1984
*dorinmax
*andreilux
*MY AMAZING TEAM!!
(I trully hope i have not forgotten anyone!!!!)
GITHUB SOURCE
Dont forget:
Flashing this Kernel voids your warranty. And as with any custom kernel it comes with the usual dangers/ side effects such as, but not limited to, explosions, wars, spontaneous combustion, your pet forgetting all his/her tricks, retrograde and anterograde amnesia, interpersonal alienation, a number of psychosomatic, neurological, and metaphysical complaints, and in general an overall disturbance in the "order of things". Having said all that, WE ARE NOT RESPONSIBLE for anything happening to your phone as a result of you flashing this kernel...
XDA:DevDB Information
Note 4 AEL Kernel, Kernel for the Samsung Galaxy Note 4
Contributors
friedrich420
Source Code: https://github.com/friedrich420/AEL_NOTE4_N910FXXU1ANK4
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 8.1
Stable Release Date: 2015-03-03
Created 2014-10-30
Last Updated 2015-05-04
FULL SYNAPSE CONTROL IN PICTURES:
Note for Synapse Control:
- Set the Hardlimit Screen on Max the same as the max CPU Frequency you want
(for example if you want to overclock to 2.84, first set the hardlimit max frequency on to 2.84)
Click to expand...
Click to collapse
SUGGESTED BASIC SETTINGS
a. FULL PERFORMANCE (mainly for benchmarks)
- Hardlimit Screen On Max= 2.89
- Cpu Freq Max= 2.89
- Cpu Freq MIn= 268
- Cpu Governor= Performance or Bluactive
- I/O Scheduler: Deadline
- I/O Scheduler Readahead= 1024
- GPU Governor= Performance or cpubw_hwmon
- Enable simple gpu_algorithm
- Laziness=10
- Ramp Up Threshold= 1
- Dynamic FSync= On
- KSM = On
Click to expand...
Click to collapse
b. BALANCED
- Hardlimit Screen On Max= 2.68
- Cpu Freq Max= 2.68
- Cpu Freq MIn= 268
- Cpu Governor= Umbrella_Core or Interactive_Pro or Bluactive
- I/O Scheduler: sio or zen or bfq
- I/O Scheduler Readahead= 1024
- GPU Governor= msm_adreno or simple_ondemand
- Enable simple gpu_algorithm
- Laziness=5
- Ramp Up Threshold= 4000
- Dynamic FSync= On
- KSM = On
(Optional use of intelliplug- you can still reach very good SOT
on these settings with mpdecision)
Click to expand...
Click to collapse
Reserved
Taken
Running v2b at the moment. Absolutely great, thanks for the great work my man :good:
Pater Albrecht said:
Running v2b at the moment. Absolutely great, thanks for the great work my man :good:
Click to expand...
Click to collapse
Thank you so much !!
Thanks a lot. First kernel for N4, amazing. Everything works nice for me. S2S works nice but I'm unable to make S2W working.
Big thanks for your work.
Sent from Tapatalk
Agree to the kernel driver and the configs match the N910F source code. According to my knowledge, the N910T source code is indeed for the N910F version but some things just go.
tr72 said:
Thanks a lot. First kernel for N4, amazing. Everything works nice for me. S2S works nice but I'm unable to make S2W working.
Big thanks for your work.
Sent from Tapatalk
Click to expand...
Click to collapse
i know my friend..
i have been trying to get that S2W to work since note 3
i will eventually figure it out bc im obsessive..
thehacker911 said:
Agree to the kernel driver and the configs match the N910F source code. According to my knowledge, the N910T source code is indeed for the N910F version but some things just go.
Click to expand...
Click to collapse
i think you are absolutely correct!!
btw tmo users have reported using this kernel without issues but thats not a surprise..
OT (bc i forgot to mention it elsewhere) i used the N910F ramdisk..
friedrich420 said:
i think you are absolutely correct!!
btw tmo users have reported using this kernel without issues but thats not a surprise..
OT (bc i forgot to mention it elsewhere) i used the N910F ramdisk..
Click to expand...
Click to collapse
That with the ramdisk is already clear to me that it is the N910F. My concern is mainly about the kernel driver (source / drivers) do not have problems with N910F. Well the N910F Source code coming soon
[30 October 2014] [Kernel] [SM-910F] N4 AEL Kernel
The source is unified across the board when it comes to the Snapdragon version. The only difference is which carrier's build script is in the root folder. You can find all of the configs for every one of them in the tmo source, though.
I don't intend to cover anything outside of North America, so Europe is all you. I'm sending people here as long as that isn't an issue.
This kernel also works perfectly on my Canadian SM-N910W8 in case any Canadian users are wondering
sent from Canada via my Note 4, 3, 2 or One X+
@friedrich420
glad to see u here. any beta for 910g ?
twistedumbrella said:
The source is unified across the board when it comes to the Snapdragon version. The only difference is which carrier's build script is in the root folder. You can find all of the configs for every one of them in the tmo source, though.
I don't intend to cover anything outside of North America, so Europe is all you. I'm sending people here as long as that isn't an issue.
Click to expand...
Click to collapse
I cant thank you enough for your free courses via github!! I have never ever seen a developer make github look like a narrative with a beginning, middle and end!! Its unreal and shows the brains behind!! Im sorry for my messy messy commits my man i need to get better!!
Thank you
Thanks for your kernel!
Are you going to implement faux sound?
Agaranda said:
Thanks for your kernel!
Are you going to implement faux sound?
Click to expand...
Click to collapse
I almost almost had it.. but as soon as you would try to change values with faux sound it would become unresponsive.. so i removed it for now but ill tell you this.. i will get that [email protected]#$&
Sent from my SM-N910F using Tapatalk
First night with your kernel. Charged before sleeping and left it 8 hours. Result : 93% of deep sleep and battery loose 3%.
Really better than stock. Thanks a lot.
Sent from Tapatalk
@friedrich420
Congratulations my friend
Another excellent work
you are a Fantastic person and a awesome Developer
twistedumbrella said:
The source is unified across the board when it comes to the Snapdragon version. The only difference is which carrier's build script is in the root folder. You can find all of the configs for every one of them in the tmo source, though.
I don't intend to cover anything outside of North America, so Europe is all you. I'm sending people here as long as that isn't an issue.
Click to expand...
Click to collapse
These are the configs of the EU version in source code is known to me. Nevertheless, what is presently as the internal kernel drivers are different in N910F source . Whether there are differences between the drivers you can not say at present . Presumably it does nothing but surely I 'm not .
Here is a problem from a German forum:
Seifi1984 said:
Hi folks just have a little problem I have installed the Echeo Rome on the SGN4 and because Ael kernel since the device loses after every reboot ( Normal or Hot Restart) and the flight mode Passphrasse , what can I do . The only thing I do not want to make the stock Rom flash . Does anyone have an IDEA .
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
FEATURES OF BEAST :
- Compiled with Linaro GCC 4.9 Toolchain @Christopher83
- 4 HOTPLUGS : MPDECISION/MSM HOTPLUG/BRICKED HOTPLUG/ALUCARD HOTPLUG @myfluxi & @neobuddy & @alucard24 & @showp1984
- 18 GOVERNORS : ALUCARD/ABYSSPLUGV2/ADAPTIVE/DARKNESS/IMPULSE/LIONHEART/NIGHTMARE/PEGASUSQ/ZZMOOVE ETC CPU Governors
- CUSTOM MSM THERMAL CONTROL @franciscofranco
- DT2W @thewisenerd
- New KCAL COLOR CONTROL DRIVERS @savoca
- ADRENO IDLER 1.1 @arter97
- FAUX SOUND CONTROL
- MULTIROM SUPPORT
- GPU @ 550mhz
- UPDATED CPU BOOST @neobuddy89
- FAST CHARGE
- CPU UNDERCLOCK
- MSM_CPUFREQ/CONSERVATIVE/MSM-ADRENO/SIMPLE_ONDEMAND ETC ETC GPU Governors
- BFQ/SIO/FIOPS/Zen IO Schedulers
- POWER EFFICIENT WORKQUEUE
- VIBRATE INTENSITY CONTROL
- NEON SUPPORT
- USB KEYBOARD/MOUSE SUPPORT
- OPTIMIZED AES AND SHA1 ROUTINES
- NEON ACCELERATED XOR IMPLEMENTATION
- NEW TCP CONGESTION CONTROL (Westwood, Yeah, Veno, Vegas, SCALABLE, LP etc)
And Much More...Check My Source For Details Features
Download Link :
The Beast Kernel
Mirror Link
HOW TO INSTALL :
BOOT IN RECOVERY
FLASH THE STOCK BOOT.IMG (Important) (confused read this)
WIPE CACHE (Optional)
WIPE DALVIK CACHE (Optional)
FLASH KERNEL
REBOOT AND ENJOY!
CREDITS AND SPECIAL THANKS TO :
@fefifofum @Kra1o5 @rebelos @Khan_frd2002 @YoshiShaPow @Klozz @ak
@franciscofranco @neobuddy @showp1984 @alucard24 @faux123 @RenderBroken
@desalesouche @fermasia @Bhu1 @frap129 @thewisenerd @hurtsky
@Cl3Kener @savoca @Blechd0se @REV3NT3CH @engstk @rebelos @dipanjanforever
@BATVIC @cheeze.keyk @tanaymondal @sherry_94 @ashishranjan738
@GuthrieGovan @JeGuina @teddy0804 @tanaymondal @gkvidhu1979
@unkown rockstar @atifjay @ rajanj1996 @vijay480 @SaberMod @XDA @Xaiomi
thanks a lot guys....without you this is not possible
XDA:DevDB Information
Beast Kernel , Kernel for the Xiaomi Redmi 1S
Contributors
Luffy.d, YoshiShaPow, Armani Devs,Khan_frd2002,fermasia
Source Code: https://github.com/LuffyXDA/kernel_xiaomi_armani
Kernel Special Features: alucard_hotplug,msm_hotplug,bricked_hotplug,kcal,dt2w,s2w,smoothness,battery and last but the main thing performance
Version Information
Status: Stable
Current Stable Version: v7
Stable Release Date: 2015-12-01
Created 2015-01-10
Last Updated 2015-12-01
Reserved
Change-Log :
BK_v1.0
Code:
[SIZE="2"]initial release
compile with sabermod
add some governors & IO
check source for more[/SIZE]
BK_v1.1
Code:
[SIZE="2"]Merge with armani devs source for better compatibility with rom
removed intillidemand governor
add new 4 governors :
ondemandplus/optimax/smartmax/wheatley Governors
Added Faux Sound..
Enable USB Fast Charge
GPU Optimize & OC at 550mhz
Add Neon Support
Add vibrate Intensity Control
Much More..[/SIZE].
BK_v1.2
Code:
[SIZE="2"]Upstream to 3.4.5
Added Intelli_plug and Intelli_thermal v2 Thanks to Faux123
Added Display Control Drivers
Added Fixes from Armani Devs
Optimize The Kernel Little now enjoy more smoothness
much more[/SIZE]
BK_v1.3
Code:
[SIZE="2"]Upstream to 3.4.75
Fix Intili_plug now working perfectly
Fit Intilli_thermal
Added Intilliactive Governor
O3 and Some Other Optimization
UKSM
Update USB fast Charge Drivers
More Smoother and Snappier
and much much more[/SIZE]
BK_v2.1
Code:
[SIZE="2"]Compile With New KK Base Thanks to @fefifofum @Kra1o5 @rebelos
Compiled with Linaro GCC 4.9 2015 (Cross Compiler Cortex A7) thanks to @Christopher83
Added MSM Hotplug thanks to @myfluxi @neobuddy
intilliactive/intillimm added
BFQ/SIO/FIOPS/Zen IO Schedulers added
Underclock CPU
Dynamic Fsync control Added
exFat Support Added
Enable 12 New TCP Congestion controls
Added vnswap/frontswap/zswap thanks @faux123
the list is goes on check [URL="https://github.com/LuffyXDA/android_kernel_xiaomi_armani/commits/cm-11.0"]my source[/URL] for more[/SIZE]
BK_v2[R16/Mokee]
Code:
[SIZE="2"]Back to 3.4.0 from 3.4.75
compiled with SaberNano toolchain thanks to @frap129
vibration intensity fix thanks to @kairi_zeroblade
Async Fsync from HTC
Dynamic Fsync control Added
exFat Support Added
Added and use csnappy compression
ofast and cortex a7 optimization
Removed intilli-thermal
Removed fast charge
Added and use csnappy compression thanks to zeevt
And lots of patches and other changes added from falcon,hammerhead
And lots more...check [URL="https://github.com/LuffyXDA/BeastKernel_Armani/commits/cm-11.0-old"]my source[/URL] for details features[/SIZE]
BK_v2.2
Code:
[SIZE="2"]Sync with CM R22
update MSM Hotplug driver
removed intilliactive/intillimm for now
Added 11 New Governor
Added kernel support for USB keyboard/mouse
Overall Stats (for better stats of core)
Add optimized AES and SHA1 routines
overclock slimbus (for better audio quality)
Add NEON support for kernel
add NEON accelerated XOR implementation
Add Powersuspend drivers
Some optimization
the list is goes on check [URL="https://github.com/LuffyXDA/android_kernel_xiaomi_armani/commits/cm-11.0"]my source[/URL] for more[/SIZE]
BK_v2.3[KK]
Code:
[SIZE="2"]Sync with latest armani dev changes
Fix Smartass and Add Lagfree Governors
Added S2W && DT2W thanks to @thewisenerd
New KCAL Drivers added (my favorite) thanks to @savoca
Update PowerSuspend drivers
Enable NTFS support
Added MSM CPUFREQ Limiter
[/SIZE]
BK_RC2[L]
Code:
[SIZE="2"]Compile from armani-dev cm-12.0 source
Everything from scratch
Added Both MSM_HOTPLUG and ALUCARD_HOTPLUG @myfluxi @neobuddy @alucard24
Added S2W && DT2W thanks to @thewisenerd
Added 9 New Governors (Alucard,Adaptive,Abyssplugv2,Darkness etc etc)
All the thing in Features @OP
some misc optimization
[/SIZE]
BK_RC3[L]
Code:
[SIZE="2"]Sync with latest armani-dev CM-12.1 changes
TCP CONG is back
Enable unaligned memory access
Added optimized ARM RWSEM algorithm @Ezekeel
Update LZO compression to current upstream version …@faux123
Some SELinux changes
add support for gcc 5/6 toolchain
wake_helpers patches @thewisenerd
some misc changes...
check my source for details feature i am no good in writing :p
[/SIZE]
BK_RC4[L]
Code:
[SIZE="2"]Sync with latest armani-dev CM-12.1 changes
Bricked Hotplug Added @neobuddy &showp1984
Added fast charge option @anarkia1976 ( now charge your phone bit fast ;) )
Simple GPU Algorithm Added @ faux123
improve fairness efficiency
Update min-default GPU frequency to be 200MHz
added userspace knobs for users to filter some common excessive wakelocks @franciscofranco
some more changes...
check my source for details feature i am no good in writing :p
BK_RC5[L]
Code:
[SIZE="2"]Rebase with Rebelos Source (so all the SlimL kernel changes are here)
Compile with Linaro 5.1 Toolchain
New Hotplug added AutoSMP (enable by default)
Custom msm_thermal added by @franciscofranco
dt2w removed (cuz new dt2w is coming by thewisenerd)
GPU OC is back
Added Some New Govs : zzmoove/hellsactive/optimax/impulse/yankactive
Some kernel Optimization
some more changes...
check my source for details feature i am no good in writing :p
[/SIZE]
BK_v3[KK]
Code:
[SIZE="2"]Sync with latest armani dev changes
removed Smartass and Lagfree Governors
Added Alucard Hotplug
Remove msm_hotplug
added Dynamic management of dirty page writebacks @Christopher83
Added Darkness Gov
update conservative gov (become my favorite now)
added msm: memutils: memcpy, memmove, copy_page optimization
and some misc changes
[/SIZE]
BK_RC6[L]
Code:
[SIZE="2"]Back to Armani-dev Source
Compile with UBER 5.1 Toolchain
Fuax Sound Added
dt2w is back again ( plz note : touch freeze is still there so don't enable dt2w at boot)
ondemand patches from @myfluxi
optimize zzmoove @hurtsky
check my source for details feature i am no good in writing :p
[/SIZE]
BK_v5
Code:
Compiled With latest Linaro GCC 4.9 @Christopher83
Now Support Both Rom's cm-11 & cm-12.1 in single kernel
Adreno_idler 1.1 @arter97
4 Hotplugs Now : mpdecisin,msm_hotplug,bricked_hotplug,alucard_hotplug
all cm-12.1 changes and BeastL changes for cm11 user
update cpu-boost @neobuddy &@ak
removed Simple GPU Algorithm
removed dynamic sync control
and some more changes.....check my commit for more details
[/SIZE]
BK_v6
Code:
Sync with Armani-Dev Source
MultiRom Support
Update Hotplug's
Add Custom Script thanks to @RenderBroken
Tune build flags @neobuddy89
update Kcal
update msm_thermal
Some Misc Changes
and little more changes.....check [URL="https://github.com/LuffyXDA/android_kernel_xiaomi_armani/commits/cm"]my commit[/URL] for more details[/SIZE]
BK_v7
Code:
Based on new kk source (armani-dec cm-12.1-clean branch)
Most of Beast v6 feature but not all
enable Intelli hotplug and disable Msm Hotplug
So now Beast have Intelli/Bricked/Alucard Hotplug
Update Alucard Hotplug to latest
Add MSM limiter
Remove Faux sound
Remove some Governors
Remove Savoca Kcal
Dt2w only for ft5x06 touch, sorry other dont worry will add in next build
Update State Notifier to latest (Hope no SOD)
Two New Governor : Intelliactive/smartmax
and i didn't tuned the cpu gov much let me know which one need tuning
Cpufreq optimization from ak & neo
and other upstream changes
and little mores.....check [URL="https://github.com/LuffyXDA/android_kernel_xiaomi_armani/commits/cm"]my commit[/URL] for more details[/SIZE]
Test Builds
Test Builds
How To
Native D2W :
There are two ways by which i enable/disable Native D2W
1. By using Terminal Emulator
2. By using Root Explorer
Terminal Emulator :
to enable
echo 1 > /sys/bus/i2c/drivers/ft5x06_i2c/5-0038/d2w_switch
to disable
echo 0 > /sys/bus/i2c/drivers/ft5x06_i2c/5-0038/d2w_switch
Root Explorer
Go to sys/bus/i2c/drivers/ft5x06_i2c/5-0038
Open " d2w_switch" file as text editor
then just changed : 1 to enable and 0 to disable
Hope this Help You All :good:
Faqs
Q. Did BeastKernel Works on All Roms?
A. Yes, From Beast v7 it will work on all roms except MM for now
Q.There are two BeastKernel Which one Should i Install? And Which one is for cm11 or cm12.1 or Miui
A.TheBeast-vX-CM.zip is for both CM11/12.1 and TheBeast-vX-Miui.zip is for Miui
Q. The BeastKernel Have soo many feature but i dont know how to use them or change them...
A. Use Kernel Adiutor App
Q. I am on another awesome kernel and i want to try beast can i flash over
A. No!!!, you can flash beast over any other kernel except stock. So if you are on any other kernel then flash stock kernel or dirty flash the rom then install the beast
Q. I Install the Rom but XYZ not working !! what should i do please help
A. First try to read some previous post and see other are getting the same issue if not then do a clean flash or dirty flash even not work then post here or pm me...i will be happy to help you
Hi, are you compiling a dt.img, or are you using the prebuilt dt.img? If the former, what's the size of your obtained dt.img?
thewisenerd said:
Hi, are you compiling a dt.img, or are you using the prebuilt dt.img? If the former, what's the size of your obtained dt.img?
Click to expand...
Click to collapse
yes i m using compile dt.img.....
edit : size is 4.9 mb
Will the kernel work on any build of cm11 ex( r13,r14,r15)?
Sent from my HM 1S using Tapatalk
Snapdragon815 said:
Will the kernel work on any build of cm11 ex( r13,r14,r15)?
Sent from my HM 1S using Tapatalk
Click to expand...
Click to collapse
no only on latest cm r15.....
Luffy.d said:
no only on latest cm r15.....
Click to expand...
Click to collapse
Is there any chance in near future to get it for R14...?
Sent from my HM 1S using Tapatalk
Snapdragon815 said:
Is there any chance in near future to get it for R14...?
Sent from my HM 1S using Tapatalk
Click to expand...
Click to collapse
no because the older cm use prebuilt kernel.....so any compile kernel wont work for older cm
What are the features of beast kernel?
sinnerz2000 said:
What are the features of beast kernel?
Click to expand...
Click to collapse
for now not much it just the initial release....
check changelog or the commits of my source for more details.....
Great Work Buddy....
khan_frd2002 said:
Great Work Buddy....
Click to expand...
Click to collapse
great work,bro..........Hoping this kernel will coming with best features for our device in the near future...................
Will yu make it compatible with late Carbon rom?
dixan43 said:
Will yu make it compatible with late Carbon rom?
Click to expand...
Click to collapse
no buddy it wont work on any old rom.....
still i will give it a one try.....are you on carbon?
if yes then pm me
Glad to see another kernel :good:
new build is added at op for old cm & cm based rom.....anyone can test and report back
check op for download link or here
Luffy.d said:
new build is added at op for old cm & cm based rom.....anyone can test and report back
check op for download link or here
Click to expand...
Click to collapse
Flashed over Carbon ROM RC5. Booted up and then just shows a blank screen with the Mi logo.
Screen turns on and off, I can hear the volume being adjusted, but that's all.
Reflashed original ROM and all is back to normal.
Thanks for continued development.
Peace.
Please implement OC/OV function.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For experimental builds with D2W/S2W see post #3. ENJOY !!!
Presenting before you "Stellar Kernel" - the most feature rich stock kernel for M0to G 2014. Experience stellar features, stellar performance and stellar battery life combined with stellar stability.
Since there are so many kernels for custom roms, and none for stock, I decided to make one. I will keep updating this kernel with many features! Feel free to request for features. I will try to port as much feature as i can from CM Lollipop kernels.
This kernel is guaranteed to bring the best out of your phone . Enjoy !!!
NOTE :-
This kernel is ONLY MEANT FOR STOCK ROMS & NOT FOR CM12/12.1 based ROMs.
DISCLAIMER :-
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will simply laugh at you.
*/
FEATURES :-
(please download the latest version to get all of the mentioned features)
Based on stock lollipop kernel for Moto G 2014
Compiled using Linaro Toolchain 4.9.3 optimized for ARM
Fully Compatible with Xposed
Any Kernel script used
Kexc Hardboot patched
Built with Ofast flags
Added strict_aliasing & modulo_sched flags
CPU UC to 96 MHz
GPU OC to 533 MHz & UC to 100 MHz
RAM OC to 566 MHz
Disabled PowerHal log spam (thanks to @attack11)
Faux Sound Control v3.2
Headset in high performance profile
24 bit audio support
Low latency audio playback
Slimbus overclocking for superior audio quality
Ultrasound & ASoC : qdspv2 tweaks (see GitHub)
Readahead set to 256
Set sched_mc_power_savings to 2
NVIDEA Power efficient patches
Optimized slub memory allocator
Optimize Sfck Compression
Sched Tweaks (see GitHub)
Add Frandom
Power effecient work queues enabled by default
Reclaim RAM from loggers, increasing default ram to 883 Mb
Disable gentle_fair_sleepers for increased I/O
Enable unaligned_access
Enable arch_power
Use power efficient workqueues for bam_dmux
Optimize square root algorithm
Many tick, clockevents & timer tweaks (see GitHub)
Lower swappiness
Ability to use your device as USB Keyboard / Mouse (use this apphttps://play.google.com/store/apps/details?id=remote.hid.keyboard.client&hl=en)
Stereo call record support (use this apphttps://play.google.com/store/apps/details?id=com.boldbeast.recorder&hl=enhttps://play.google.com/store/apps/details?id=com.boldbeast.recorder&hl=enhttps://play.google.com/store/apps/details?id=com.boldbeast.recorder&hl=en ONLY with root mode ON)
Increase torch power by 20mA
psx2usb
KCAL v2 by Savoca
Added simple GPU Algorithm
GPU tweaks (see GitHub)
Dynamic FSync
Intellithermal v2
Added LCD notifier driver
Enabled quick wakeup
NOATIME and NODIRATIME as default
NEON kernel mode
Ex-FAT support
SE Linux tweaks
USB Fast Charge v2
Random / entropy tweaks
[*]CPU Governors :-
intelimm, intellidemand, intelliactive, smartmax, pegasusq, conservative, ondemand, userspace, powersave, performance, interactive, alucard, impulse, ondemandplus, wheatley, yankactive, nightmare, HYPER, darkness, zzmoove.
[*]CPU Hotplugs :-
Intelliplug, Alucard Hotplug, MSM Hotplug, mp-decision, Bricked Hotplug.
[*]GPU Governors :-
msm-cpuferq, msm-adreno-tz, userspace, powersave, performance, simple_ondemand.
[*]IO Schedulers :-
fiops, vr, zen, sio, bfq, cfq, row, deadline, noop, tripndroid.
[*]TCP Congestions :-
westwood, cubic, reno, hstcp, hybla, vegas, veno, scalable, lp, yeah, illinois, hctp, advanced, highspeed.
CHANGELOG:-
Code:
--------17/04/2015-----------v1.0--->
[LIST]
[*]Initial Build
[/LIST]
---------18/04/2015----------v1.1--->
[LIST]
[*] Add Kexec Hardboot
[*]Add Stereo Call recording support
[*]Increase Torch power to 20mA
[*]Enable Slimbus overclocking for superior audio quality
[*]Force SELinux Permissive
[*]Add Custom Vibrator Intensity
[/LIST]
---------20/04/2015----------v1.2--->
[LIST]
[*]Remove Power Torch inc by 20ma
[*]Remove SELinux always Permissive
[*]Remove custom vibrator support
[*]Add KCAL v2
[*]Add Intelliplug
[*]Add NVIDEA Patches
[*]Add psx2usb
[*]Add Frandom
[/LIST]
---------21/04/2015----------v2.0--->
[LIST]
[*]Add Custom Vibrator
[*]Increase Torch Power
[*]Add many IO Schedulers
[*]Enabled Pipe flags
[*]Many other optimizations.....
[/LIST]
---------24/04/2015----------v2.1--->
[LIST]
[*]Add many CPU Governers
[*]Add many TCP Congestions
[*]Add Intellithermal v2
[*]Add support to use device as USB Keyboard/Mouse
[*]Enable KSM
[*]Add Graphite Flags
[/LIST]
---------28/04/2015----------v2.2--->
[LIST]
[*]Optimize PEWqs system-wide
[*]Add Powersuspend
[*]Add Dynamic FSync
[*]Revamped spinlock ASM code
[*]Set readahead to 256
[*]Set mc_power savings to 2
[*]Optimize sfck compression
[*]Enable Headset in HPP
[*]Many other optimizations.....
[/LIST]
---------02/05/2015----------v3.0--->
[LIST]
[*]Add MSM-Hotplug
[*]Add new CPU Gov :- alucard
[*]Disable gentle fair sleepers
[*]Enable arch power
[*]Cleaned up some dead code
[*]Other CPU optimizations.....
[/LIST]
---------07/05/2015----------v3.1--->
[LIST]
[*]SE Linux tweaks
[*]Enable UNALIGNED_ACCESS
[*]Time & clock tweaks
[*]Entropy tweaks
[*]Disable crc check for 30% extra performance in IO
[*]Many-many more tweaks......check my github commits for full changelog
[/LIST]
---------27/05/2015----------v3.2--->
[LIST]
[*]Fix Kexec Hardboot
[*]MSM Hotplug tweaks
[*]Add exFAT support
[*]New GPU Governor added : conservative
[*]Added lcd_notifier
[*]Many GPU tweaks
[/LIST]
---------30/05/2015----------v4.0--->
[LIST]
[*]Added 8 new cpu govs : impulse, ondemandplus, wheatley, yankactive, nightmare, HYPER, darkness, zzmoove.
[*]Low latency for superior audio
[*]Other tweaks and changes.
[/LIST]
---------20/06/2015----------v4.1--->
[LIST]
[*]Updated with latest Motorola's sources
[*]CPU UC to 96MHz
[*]GPU OC to 533MHz & UC to 100MHz
[/LIST]
---------03/07/2015----------v5.0--->
[LIST]
[*]Overclock RAM to 566 MHz
[*]Enable kernel_neon mode
[*]Add strict_aliasing & modulo_sched flags
[*]msm kgsl tweaks
[*]msm:ultrasound tweaks
[*]msm:vibrator handle out of range properly
[*]qdspv2 tweaks
[*]CHROMIUM:fix calculation of dirty memory
[*]Use power eff. wqs. for bam_dmux
[*]And many more...(see GitHub)
[/LIST]
---------25/07/2015----------v5.1--->
[LIST]
[*]Add Alucard Hotplug
[*]Add Bricked Hotplug
[/LIST]
---------06/09/2015----------v5.2--->
[LIST]
[*]Update zzmoove to v1.0_beta-8
[*]Merged latest Moto source updates
[/LIST]
MULTIROM/KEXEC HARDBOOT :-
Thia feature is ONLY available on v2.0, v2.1 and from v3.2 onwards.
i . e . from v2.2 to v3.1 DOES NOT support Multiboot. Trying out these versions with multirom will result in unexpected behaviour.
DOWNLOADS :-
(do not mirror my links)
Latest Version
Older Versions
INSTALLING:-
Reboot into recovery.
Make a nandroid BackUp.
Select Install zip from SD Card.
Select the Downloaded zip.
Then Reboot to System.
KNOWN ISSUES :-
Battery shows charging even on disconnection of the charger.
Solution :-
This issue, as I have noticed is caused due to enabling of USB fast charge. I noticed this on few cm roms too. After having charged, disconnect the charger, disable USB fast charge, reconnect charger and disconnect again. This should solve the issue. You can re-enable fast charge again !
ELSE :- You can also try this great fix suggested by @wernerml.
RECOMMENDED SETTINGS :-
See Post #2.
BUG REPORTS :-
While submitting a bug report be sure of mentioning the following things :-
ROM
Kernel Version
Whether using Xposed or not
A Logcat
Preferably a screenshot
Bug reports NOT meeting these criteria will be ignored.
RECOMMENDED APPS FOR KERNEL TWEAKING :-
Kernel Adiutor
Faux123 Kernel Enhancement Pro
Trickster Mod
Synapse
CREDITS:-
I would specially like to thank @Thecrazyskull for his extended support in development of this kernel.
Others whose help I took :-
~~Google
~~Motorola for kernel sources
~~Luk & Luca -for various fixes
~~Thecrazyskull DC07 & PizzaDox -for cherry-picks
~~Faux123
~~Savoca
~~YoshiShaPow
~~attack11
~~many more.......
Please don't start a war here if I forgot to mention someone. PM me and I will add him.
XDA:DevDB Information
StellarKernel, Kernel for the Moto G 2014
Contributors
zakee94
Source Code: https://github.com/zakee94/stellar_msm8226
Kernel Special Features: Kexec, Intelliplug, KCAL, Faux Sound, USB Fast Charge, Intellithermal, D2W/S2W
Version Information
Status: Stable
Current Stable Version: 5.2
Stable Release Date: 2015-09-06
Created 2015-04-17
Last Updated 2015-09-06
Experimental Builds
EXPERIMENTAL BUILDS with D2W/S2WPresenting before you the experimental builds of Stellar Kernel with D2W/S2W support! Enjoy these builds but be aware that you might face some issues, so be sure of reporting them back so that they can be improved in further builds. ENJOY !!!
WHY EXPERIMENTAL ?
The reason behind making these builds "experimental" is simply because D2W/S2W is not yet fully compatible with our device. They cause occasional freezes and touch issues and bring down the overall performance. Hence, until serious work is done on making D2W/S2W compatible, these builds will remain experimental and WILL NOT be merged with stable builds.
PLEASE NOTE THAT :-
D2W/S2W is NOT compatible with all models of this phone.
It supports only the following display types :-
mdss_dsi_mot_inx_720p_video_v0
It DOES NOT support the following display types :-
mdss_dsi_mot_jdi_720p_video_v1
mdss_dsi_mot_jdi_720p_video_v0
To check which display type you have by going into terminal and type :-
Code:
su
cat /proc/cmdline
FEATURES :-
All features of the LATEST stable build
D2W/S2W
Sweep2Sleep- bidirectional support
DOWNLOADS :-
Latest Version
Older Versions
CHANGELOG :-
Code:
--------02/05/2015-----------v1.0--->
[LIST]
[*]Initial Build based on stable v3.0 build
[/LIST]
--------03/05/2015-----------v2.0--->
[LIST]
[*]Tried fixing d2w/s2w
[/LIST]
--------07/05/2015-----------v3.0--->
[LIST]
[*]Build based on stable v3.1
[*]Optimized d2w/s2w
[/LIST]
--------03/07/2015-----------v4.0--->
[LIST]
[*]Build based on stable v5.0
[*]Added lcd_notifier driver
[/LIST]
--------03/07/2015-----------v5.0--->
[LIST]
[*]Build based on stable v5.1
[/LIST]
--------02/05/2015-----------v6.0--->
[LIST]
[*]Build based on stable v5.2 build
[/LIST]
DO REPORT BUGS (Read Carefully) :-
The reason I am asking you to do so is because I DO NOT have a "mdss_dsi_mot_inx_720p_video_v0" display.
Therefore I CANNOT TEST ANY OF THESE BUILDS. If you want further support on these build DO TEST and REPORT.
Recommended Settings
RECOMMENDED SETTINGS
Below listed are the recommended settings for the StellarKernel. The settings are such that they give a balance between performance and powersave. However you can always tweak the settings according to your need and wish. But be careful that you do not over tweak or play with settings you don't know. Please do a lot of research before playing with your expensive hardware ! Enjoy !!!
Read this AWESOME GUIDE by @gsstudios befor heading over to any settings.
CPU :-
Max Freq :- 1190MHz
Min Freq :- 96MHz
Governor :-
As you wish ! However read this awesome guide before messing with the govs.
My personal favourites :- HYPER / interactive / impulse.
CPU Hotplug :-
MP Decision :- off
IntelliPlug :- on
Touch Boost :- on
Hysteresis Value :- 7 or 8
Screen off freq. :- Disabled
GPU :-
Governor :- msm-adreno-tz
Simple GPU Algorithm :- on
Laziness :- 4
Ramp Thresold :- 6
GPU Max freq. :- 533MHz
Screen :-
As you wish !
Sound :-
As you wish ! Generally recommended to increase gain on all sides.
Battery :-
Throttling :- on
Throttle freq. :- 787
USB FastCharge :- As you wish !
I/O Scheduler :-
zen/noop :- for both emmc & sd
Read Ahead :- 128kB
Entropy :- off
KSM :-
Recommended disabled. Enable at you own RISK. If enabled you MAY NOT BE ABLE TO SAVE PHOTOS TAKEN FROM THE CAMERA.
However if you want to Enable use following settings :-
Pages to scan :- 200 to 300
Activation Threshold :- 24
Cycles per Activation :- 3
Scan delay interval :- 300
Virtual Memory :-
Z-RAM :- on
swapiness :- 55
vfs cache pressure :- 120
dirty ratio :- 20
background ratio :- 5
Thermal :-
Intellithermal :- on
Core Control :- on
VDD Restriction :- on
Freq Throttle Temp :- 63.0C/145.4F
Core Throttle Temp :- 77.0C/170.6F
Poll :- 250ms
Others :-
TCP Congestion :- westwood / vegas / veno
SE Linux :- permissive
Powersuspend :- hybrid
Dynamic FSync :- on
Hint :-
Turn off WiFi when not in use to even BOOST UP the battery life.
NOTE :-
Options not mentioned in these recommended settings are NOT meant to be touched and should be left the way it is.
nice to see some solid features in here
edit
Can you add kexec hardboot patch, if you want, pm me and ill send you the commits, cause alot of people want to dual boot lets say Titan Prime and 5.1 CM, stuff like that, so maybe add kexec, since this will be the first kernel to have that
Booted and i can confirm that everything working fine :thumbup:nice work OP
Now this made my day.
Thank you for doing what it really needed to be done.
Nice to see a Stock Kernel thank you
Is it possible in near or far future to add Stereo call recording support by skvalex?
THIS along with a Star Wars Teaser for a Movie AND a Game in a single day, I'm fulfilled, I can now die in peace, thank you :') .
You can add kcal? Pls
kexec patch would be a great contribution, any ways ill try this kernel thanks
Run great in titan prime
Can you compile kernel with selinux permissive for xprivacy to xposed framework ? Thanks
This is beautiful, finally someone doing some justice to Stock Lollipop. Hope to see more Spirit Kernel features into this.
Sent from my Moto G 2014 using XDA Free mobile app
Lynse said:
This is beautiful, finally someone doing some justice to Stock Lollipop. Hope to see more Spirit Kernel features into this.
Sent from my Moto G 2014 using XDA Free mobile app
Click to expand...
Click to collapse
I am almost done with a stock kernel called "TP Kernel"....I will release it in a few days....Working on fixing random-reboot issues
Shawn5162 said:
I am almost done with a stock kernel called "TP Kernel"....I will release it in a few days....Working on fixing random-reboot issues
Click to expand...
Click to collapse
Awesome! BTW Don't forget to add the kexec hardboot patch lol
Sent from my Paranoid Android
Pizza_Dox said:
Awesome! BTW Don't forget to add the kexec hardboot patch lol
Sent from my Paranoid Android
Click to expand...
Click to collapse
LOL...I won't
Pizza_Dox said:
nice to see some solid features in here
edit
Can you add kexec hardboot patch, if you want, pm me and ill send you the commits, cause alot of people want to dual boot lets say Titan Prime and 5.1 CM, stuff like that, so maybe add kexec, since this will be the first kernel to have that
Click to expand...
Click to collapse
Sure I will ! Please give me the commits.....
lojpek said:
Can you compile kernel with selinux permissive for xprivacy to xposed framework ? Thanks
Click to expand...
Click to collapse
Comming up in next build......
maxniper said:
Nice to see a Stock Kernel thank you
Is it possible in near or far future to add Stereo call recording support by skvalex?
Click to expand...
Click to collapse
Already added ! Comming up in next build..........
Update to v1.1 is live......!!!
This update has KEXEC Hardboot, Stereo Call recording and much more......!!!
Enjoy!!!
PLEASE READ UPDATING INSTRUCTIONS CAREFULLY.
Hi guys, I have proposed to make a kernel for the falcon and here they have it <3
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Screenshot:
Click to expand...
Click to collapse
Old builds history:
http://pastebin.com/RqyTpYna
New Build Evolution Kernel-R10 , For Nougat and Marshmallow Roms
- Linux code updated to lastest LineageOS source: 3.4.113 :good:
- Based on a new clean source for greater stability
- Compiled with latest simple GCC 4.8 (great for this) :good:
- Some optimizations for kernel compression (lzma)
- Many optimization for memory usage and reduce Lag
- Added Customs TCP
- New AsCaRex custom TCP by TeamMex Added (nice)
- Lzma compression (very nice)
- No more useless mods
- Added and improved SIO, SIOPLUS, VR, ZEN v2 I/O schedulers and default BFQ, etc...
- Row I/O scheduler is recommended by me :good:
- Added toggles for wakelocks
- MSM Hotplug stable rules (Nice deep sleep Now)
- Powersuspend updated (Use in Hybrid mode)
- Kcal v2 support
-Dt2w added but does not work for the moment (disable)
- Selinux enabled in permissive mode by default
- WQ Power Efficient tweaks
- State notifier driver added
- Lcd notify driver Removed (NO MORE START SCREEN FREEZE)
- New Governors added: zzmoove, Xperience by @TeamMex , Bioshock, Lionheart and ElementalX (testing)
- Interactive and Ondemand governor updated for better efficiency
- Added Sound Control v3.6
- Fast Charge enable by default
- Fix memory leaks for better perfomance
- Many more optimizations for performance and battery saving (check source)
- New TCP congestion driver called AsCaRex by @TeamMex Added
AsCaRex employs end-to-end bandwidth measurements to set cwnd and ssthresh after packet loss. The probing phase is as the original Reno, have a modified control mechanism for use with large congestion windows. A table indicates how much to increase the congestion window when an ACK is received.
Click to expand...
Click to collapse
[/SIZE]
Important: Use the kernel adiutor application to tune this kernel
How to install:
-Paste the zip on internal memory
-Install zip with twrp recovery
-If you use SUPERSU or Magisk, after installing my kernel install again
-Reboot and Enjoy :good:
If you like my work, contribute for more updates please:
Download:
https://www.androidfilehost.com/?fid=889764386195904758
**No mirrors please**
Suggestions for balance perfomance/battery
-Use interactive gov with hispeedfreq on 787mhz and min freq 300mhz....
-For more conservative use Bioshock or Xperience governor and min freq 300mhz
-For most battery life use zzmoove gov and select profile #2 (Some lags)
-Cpu hotplug as default msm_hotplug
-Sheduler ROW
-In misc features select suspension mode on hybrid (default) and TCP select AsCaRex or westwood
Consider please
Hi friends, I appreciate your support testing my work, If you like my kernel, contribute please, actually I'm studying at the university, I do this in my free time, I would appreciate a little help if it is at your disposal, thank you very much!
Evolution Turbo Kernel Oreo Updated
-Kernel build with QUVNTNN 6.4 2018.01 Custom ToolChain
-Improved Cortex-A7 configs
-Improved XZ kernel compression
-def_config regenerate
-Updated cpufreq and gpu drivers configs for better performance
-MSM_HOTPLUG
-Spinlocks changes
-Significant lag in oreo reduced
-Simple Adreno GPU algorithm added
-New governors distribution: Default govs, XPerience, SmartMax and BioShock govs
-All TCP cong is activated (AsCaRex default)
-Many more changes for you..
Source: https://github.com/willizambrano/android_kernel_motorola_msm8226
Download: https://androidfilehost.com/?fid=746163614322268638
How to install:
-Paste the zip on internal memory
Backup of you stock boot.img
-Install zip with twrp recovery
-Reboot and Enjoy :good:
Thanks to:
-CodeAurora
-CyanogenMod team
[email protected] for Sound Control
[email protected]
[email protected] for Kcal Screen Control
[email protected] for cherry-picks
[email protected] for cherry-picks
[email protected] Arriaga
- @TeamMex
Click to expand...
Click to collapse
XDA DevDB Information
Evolution_Kernel, Kernel for the Moto G
Contributors:
@willizambrano01
Click to expand...
Click to collapse
Sources:
https://github.com/willizambrano/android_kernel_motorola_msm8226
Click to expand...
Click to collapse
XDA:DevDB Information
Evolution Kernel unified for Oreo-MM/Nougat roms, Kernel for the Moto G 2014
Contributors
willizambrano01, willizambrano01
Source Code: https://github.com/willizambrano/android_kernel_motorola_msm8226
Kernel Special Features:
Version Information
Status: Beta
Stable Release Date: 2018-06-03
Current Beta Version: TURBO
Created 2016-12-07
Last Updated 2018-10-23
Downloaded and testing. Thank you
Good work,but its just for CM ROMs? :/
DeluxeMark said:
Good work,but its just for CM ROMs? :/
Click to expand...
Click to collapse
7.1 roms baseds on cm14.1 or aosp 7.1
willizambrano01 said:
7.1 roms baseds on cm14.1 or aosp 7.1
Click to expand...
Click to collapse
Nice! So i'll test it
Edit: When i've flashed the kernel,my superSU is gone,its normal?
And when i reflash the superSU,my sim doesnt work :/
Keep up the good work! smooth butter with RR Rom!
DeluxeMark said:
Nice! So i'll test it
Edit: When i've flashed the kernel,my superSU is gone,its normal?
And when i reflash the superSU,my sim doesnt work :/
Click to expand...
Click to collapse
It have in build root permission.. Goto developer options and activate root access for apps&adb..
.
No need to flash supersu
captian_jb said:
It have in build root permission.. Goto developer options and activate root access for apps&adb..
.
No need to flash supersu
Click to expand...
Click to collapse
Actually im using tesla N rom and it isnt pre rooted
Is this for titan?
do you have any plans on supporting GPU/CPU underclock overclock and undervolt?
DeluxeMark said:
Actually im using tesla N rom and it isnt pre rooted
Click to expand...
Click to collapse
Goto developer options find root access menu.. See the attachment...
Its not there u need SuperSU..
Otherwise activate root access for apps&adb
anybody using RR 7.1.1 ? have laggy issues?
captian_jb said:
Goto developer options find root access menu.. See the attachment...
Its not there u need SuperSU..
Otherwise activate root access for apps&adb
Click to expand...
Click to collapse
This rom isnt prerooted man
Can some1 review the battery and OS performance after using this kernel ?
New build For CM13
-Evolution CM13 - R1 - New Happy Christmas Edition
-Linux 3.4.51
-Linaro 4.9 CortexA7 optimization
-Many optimization for memory usage and reduce Lag
-Added TCP modes like westwood
-Optimized when compiling: pipeFlags, -O3, Gzip
-Added fast charge v2
- Optimized BFQ planner
-Added toggles for wakelocks (activate them with kernel adiutor)
-Advanced Intellidemand and Intelliactive Governors
-Hotplug AutoSMP added
-Powersuspend added and optimized
-Fsync enabled by default
-DT2W/S2W features
-Added Kcal v2 support
-Many more optimizations for performance and battery saving
Click to expand...
Click to collapse
Download:
https://www.androidfilehost.com/?fid=673368273298918120
**No mirrors please**
Click to expand...
Click to collapse
***Very soon update for nougat***
Waiting update for nougat !
-Evolution_N-R3 is ready (need test it, My device is a falcon and works perfectly)
-Linux 3.4.100
-Linaro 4.9 CortexA7 optimization
-Many optimization for memory usage and reduce Lag
-Added TCP modes like westwood
-Optimized when compiling: pipeFlags, -O3, Lzma compression (very nice)
-Added fast charge v2 deleted (not work correctly)
- More BFQ optimizatios
-Added toggles for wakelocks
-Hotplug MSM (Very nice)
-Powersuspend v1.5 added and optimized
-Fsync enabled by default
-SoundControl 3.5 added
-Added Kcal v2 support
-DT2W/S2W features woohooo
-Selinux enabled in permissive mode
-Many more optimizations for performance and battery saving (check source)[/QUOTE]
Download:
https://www.androidfilehost.com/?fid=529152257862690587
?? downloading !! ??
Wonderful kernel. Zero lag anywhere even on snapchat. My titan feels like a 6p lol. Thanks
EXO_K said:
Wonderful kernel. Zero lag anywhere even on snapchat. My titan feels like a 6p lol. Thanks
Click to expand...
Click to collapse
Thanks for you feedback bro, enjoy??