Related
my galaxy y is not booting can anyone help me
That was brief Horatio. Now tell us what you did in detail.
taroka said:
my galaxy y is not booting can anyone help me
Click to expand...
Click to collapse
post
1. what you did before that happened
2. things that might have contributed
3. solutions you have tried
ps; be as specific as possible
i didn't do any thing first my phone hanged for the first time then i rebooted my phone
then the apps on the sd was not appearing and I was not able to download any game to the sd
so i rebooted the phone again and the problem started
what did you do before your device stopped?
then the solutions i tried was install a custom rom aurora and repences when i installed the custom roms the phone hanged at the samsung galaxy y gt-s5360 screen
so i tried doky odin package then the phone started looping on the samsung logo again
taroka said:
i didn't do any thing first my phone hanged for the first time then i rebooted my phone
then the apps on the sd was not appearing and I was not able to download any game to the sd
so i rebooted the phone again and the problem started
Click to expand...
Click to collapse
if you are sure that you did not do anything and it just all happened then you are unlucky to have to have a factory defect phone
bring to samsung's service center
Flasing stock firmware is the only thing you can do if nothing works. And is that doesn't work too, get your phone replaced.
kurotsugi said:
what did you do before your device stopped?
Click to expand...
Click to collapse
i am not sure but i think i downloaded skype and antivirus
BTW my phone was rooted and was working on doky odin package
have you wipe your /data?
raolemo said:
Flasing stock firmware is the only thing you can do if nothing works. And is that doesn't work too, get your phone replaced.
Click to expand...
Click to collapse
can you tell me how
taroka said:
then the solutions i tried was install a custom rom aurora and repences when i installed the custom roms the phone hanged at the samsung galaxy y gt-s5360 screen
so i tried doky odin package then the phone started looping on the samsung logo again
Click to expand...
Click to collapse
after flashing the stock rom, do a data wipe and cache wipe but preferably you should have done that before..
if that doesnt solve the problem, try flashing a stock kernel and reflash the stock rom
click the links below;
doky's thread
stock kernels
how to flash kernel
kurotsugi said:
have you wipe your /data?
Click to expand...
Click to collapse
yes and dalvk
BTW when i reboot from the recovery it says invalid argument and can,t mount databooting
leodasal2 said:
after flashing the stock rom, do a data wipe and cache wipe but preferably you should have done that before..
it that doesnt solve the problem, try flashing a stock kernel and reflash the stock rom
Click to expand...
Click to collapse
from where i can get a stock rom and stock Kernal
sorry iam a beginner
oh sorry the links appeared now
sorry but which kernal link should i choose
taroka said:
sorry but which kernal link should i choose
Click to expand...
Click to collapse
Don't you remember your stock ROM version? Just search for stock ROM version for the place you live in in Doky's stock ROM post and download the appropriate kernel from the kernel thread.
raolemo said:
Don't you remember your stock ROM version? Just search for stock ROM version for the place you live in in Doky's stock ROM post and download the appropriate kernel from the kernel thread.
Click to expand...
Click to collapse
you mean the version of gingerbread i have it was 2.3.5 then i update it into 2.3.6
taroka said:
you mean the version of gingerbread i have it was 2.3.5 then i update it into 2.3.6
Click to expand...
Click to collapse
No I meant the baseband!
raolemo said:
No I meant the baseband!
Click to expand...
Click to collapse
like this S5360_JPLA1_OJPLA1_XXLA2
Hi, I have rooted my device and installed a custom recovery. But that's it, haven't installed any new ROM, and still have the stock one witch it came with.
Today I received an update message, so I downloaded the new update, and as it should be, it requested a reset.
After the reset, the device boot himself into the recovery, ans apparently refuses to boot into the new rom, or anywhere but the recovery.
I performed a full wipe, and did a system restore. And still it always boot into the recovery.
Its a "Team Win" recovery v2.6.3.2
Help please.
Vad88 said:
Hi, I have rooted my device and installed a custom recovery. But that's it, haven't installed any new ROM, and still have the stock one witch it came with.
Today I received an update message, so I downloaded the new update, and as it should be, it requested a reset.
After the reset, the device boot himself into the recovery, ans apparently refuses to boot into the new rom, or anywhere but the recovery.
I performed a full wipe, and did a system restore. And still it always boot into the recovery.
Its a "Team Win" recovery v2.6.3.2
Help please.
Click to expand...
Click to collapse
what is the version number of you pad?? like 12a, 12b, 18a, 20a, 20b...........etc
Which one of those???
Jhon998 said:
what is the version number of you pad?? like 12a, 12b, 18a, 20a, 20b...........etc
Which one of those???
Click to expand...
Click to collapse
I dont remember man...
I last time I rooted a device it was a Galaxy S2, and I cracked opened the **** out of him, and something like this never happened to me..
As I told, I did a system restore, why it still doesnt boot anywhere beyond the recovery?
One more thing,
After I manage to turn it off, it starts immediately as I plug in the power, but stops on the "Logo" and with this title in the up right corner: "Secure boot error! Cause: Device Unlock, so Boot Success"
Thats it... got this message and doesnt boot... After I unplug the power, it boots into recovery, and only then (whie unplug) I can order it to power off.
Iam desperate..
Ok, now I think I am truly Fckd up...
I accidentally deleted the only restore file I had... witch didn't quit helped me the one time I launched it.. but anyways, now even this one is gone.
So now I stuck with god know what system.. (I did launched the restore, bit it didnt helped).
I do have a working recovery, and thats it. Please help me restore the device to fully stoke.
Vad88 said:
Ok, now I think I am truly Fckd up...
I accidentally deleted the only restore file I had... witch didn't quit helped me the one time I launched it.. but anyways, now even this one is gone.
So now I stuck with god know what system.. (I did launched the restore, bit it didnt helped).
I do have a working recovery, and thats it. Please help me restore the device to fully stoke.
Click to expand...
Click to collapse
Download a ROM onto sdcard through computer, transfer sdcard to tablet, install through recovery.
sleekmason said:
Download a ROM onto sdcard through computer, transfer sdcard to tablet, install through recovery.
Click to expand...
Click to collapse
Thanks, Iam downloading the one from this thread: (ROM) OFFICIAL 4.4.2 V500 Update & Go back to 4.2.2!
Is it possible to install it into the tablet in mine condition?
Vad88 said:
Thanks, Iam downloading the one from this thread: (ROM) OFFICIAL 4.4.2 V500 Update & Go back to 4.2.2!
Is it possible to install it into the tablet in mine condition?
Click to expand...
Click to collapse
Not sure. I was thinking Mahdi or Cyanogenmod. A complete ROM. If the 4.4.2 is a complete ROM, then yes. The update you are trying won't affect the recovery, correct?
sleekmason said:
Not sure. I was thinking Mahdi or Cyanogenmod. A complete ROM. If the 4.4.2 is a complete ROM, then yes. The update you are trying won't affect the recovery, correct?
Click to expand...
Click to collapse
Yes.. the update didnt effected the recovery, and from my experience it shouldnt... (the update is for the ROM, witch was stock)
Thats why I didnt install a custom ROM from the beginning, I wanted a rooted device, but for now I wanted to stay with stock ROM. After receiving an update message, I didnt think for a second that the root and the custom recovery will effect the update...
Maybe this update had something to do with the recovery... and because mine is custom, I have this issue...
Iam not an expert in the LG field, so Iam not familiar with those effects, the update caused...
Can you please look at the installation guide in the link I gave, and check if it is doable on my device.
Thank you for the help! :good:
I would like to update that I followed the instructions from this link: (ROM) OFFICIAL 4.4.2 V500 Update & Go back to 4.2.2!, and now the tablet is back alive!
Thanks for all the help!
Vad88 said:
I would like to update that I followed the instructions from this link: (ROM) OFFICIAL 4.4.2 V500 Update & Go back to 4.2.2!, and now the tablet is back alive!
Thanks for all the help!
Click to expand...
Click to collapse
Good!
Please update the post title and add "Solved".
Hello members,i have a problem . I bought a samsung galaxy tab 3 7.0 wifi (SM-T210) last week and i have rooted it + installed cwm and after i flash anything(custom lock screen or custom rom) the tablet gets soft bricked and the rom dont boot anymore,it enters automaticaly in cwm. So how can i fix it?
d0vada said:
Hello members,i have a problem . I bought a samsung galaxy tab 3 7.0 wifi (SM-T210) last week and i have rooted it + installed cwm and after i flash anything(custom lock screen or custom rom) the tablet gets soft bricked and the rom dont boot anymore,it enters automaticaly in cwm. So how can i fix it?
Click to expand...
Click to collapse
Which recovery Version you are flashed on your tab?
And which root.zip you are used?
Flash Stockrom and try it again.
bierma32 said:
Which recovery Version you are flashed on your tab?
And which root.zip you are used?
Flash Stockrom and try it again.
Click to expand...
Click to collapse
Im using the latest TWRP recovery 2.7.0.0 and for root i use a zip called universal root armeabi *smth like that*
I allready flashed the stockrom 3 times and i got the same result. also im using the T210XXANC2 firmware.
In CWM, wipe data and factory reset. Then go to Download mode, use Odin and flash your stock rom. That should do it.
paranoidmarvin42 said:
In CWM, wipe data and factory reset. Then go to Download mode, use Odin and flash your stock rom. That should do it.
Click to expand...
Click to collapse
i have rooted stock rom running with latest twrp but if i flash a custom rom it wont boot anymore, it gets softbricked but i dont know why.
d0vada said:
i have rooted stock rom running with latest twrp but if i flash a custom rom it wont boot anymore, it gets softbricked but i dont know why.
Click to expand...
Click to collapse
What ROM are you trying to flash? You must have missed a step. Make sure you read the instructions carefully before doing anything and use a custom rom for your device. Try again. I'm also new to Android and has softbricked my tab a couple of times now.
Go back to stock. Let your device boot completely. Install recovery again. Reboot again.
To make it easier, how about watching a video so you can see how it's done properly? It helped me a lot. http://forum.xda-developers.com/showthread.php?t=2459817
Good luck.
paranoidmarvin42 said:
What ROM are you trying to flash? You must have missed a step. Make sure you read the instructions carefully before doing anything and use a custom rom for your device. Try again. I'm also new to Android and has softbricked my tab a couple of times now.
Go back to stock. Let your device boot completely. Install recovery again. Reboot again.
To make it easier, how about watching a video so you can see how it's done properly? It helped me a lot. http://forum.xda-developers.com/showthread.php?t=2459817
Good luck.
Click to expand...
Click to collapse
I want to flash seal rom. also, thanks for the links, i will check them later.
d0vada said:
I want to flash seal rom. also, thanks for the links, i will check them later.
Click to expand...
Click to collapse
Plesse,dont use TWRP , i prefere CWM or PhilzTouch,why : alot of user are have postet probs when they used TWRP.
Also i prefere after rooting The Blackhawk Kernel.
bierma32 said:
Plesse,dont use TWRP , i prefere CWM or PhilzTouch,why : alot of user are have postet probs when they used TWRP.
Also i prefere after rooting The Blackhawk Kernel.
Click to expand...
Click to collapse
So i have flashed (again) the stock firmware from sammobile,i rooted it,installed cwm 6.0.4.7 and then i flashed SEAL rom v4 and its not working. Its like something that doesnt let custom rom boot on my tab. Sad part is that i cant provide a logcat because the android wont boot.
EDIT: Do i have to unlock the bootloader?
d0vada said:
So i have flashed (again) the stock firmware from sammobile,i rooted it,installed cwm 6.0.4.7 and then i flashed SEAL rom v4 and its not working. Its like something that doesnt let custom rom boot on my tab. Sad part is that i cant provide a logcat because the android wont boot.
EDIT: Do i have to unlock the bootloader?
Click to expand...
Click to collapse
Last Try,
Have you flashed The Blackhawk Kernel?
If not , Boot Into recovery, make a full wipe, flash seal ,Blackhawk Kernel ,full wipe again and reboot.
If this all not help ,post your prob at The Rom Thread.
bierma32 said:
Last Try,
Have you flashed The Blackhawk Kernel?
If not , Boot Into recovery, make a full wipe, flash seal ,Blackhawk Kernel ,full wipe again and reboot.
If this all not help ,post your prob at The Rom Thread.
Click to expand...
Click to collapse
I allready tried 3 roms(seal, 4.2.2 beta 2 and inspire) and all goes to the same result. Also, after installing the cwm i flash first the blackhawk kernel and android boots normally (stock rom with custom kernel) but custom rom with or without custom kernel wont boot.
I had similar problem try flashing seal v3.
Hi everyone!
I have just bought a Galaxy Tab 3 Lite (SM-T110). and I had flashed TWRP and rooted it, HOWEVER, after I tried to boot into recovery using "Quick Boot", the system keeps going into Recovery no matter what.
I have tried to use Odin to reflash the recovery, and I have tried to flash a different custom ROM (StockRom-V1.1-T110) using recovery, but whenever it reboots, it just goes straight to recovery.....
How can I fix this?
Please help!
ah_hin said:
Hi everyone!
I have just bought a Galaxy Tab 3 Lite (SM-T110). and I had flashed TWRP and rooted it, HOWEVER, after I tried to boot into recovery using "Quick Boot", the system keeps going into Recovery no matter what.
I have tried to use Odin to reflash the recovery, and I have tried to flash a different custom ROM (StockRom-V1.1-T110) using recovery, but whenever it reboots, it just goes straight to recovery.....
How can I fix this?
Please help!
Click to expand...
Click to collapse
reflash your kernel, and get rid of quick boot. find a dead simple reboot widget.
m
moonbutt74 said:
reflash your kernel, and get rid of quick boot. find a dead simple reboot widget.
m
Click to expand...
Click to collapse
I am in this loop too! I am a n00b.. can you pl let me know how to reflash kernel on the T110?
Help
rajmisc said:
I am in this loop too! I am a n00b.. can you pl let me know how to reflash kernel on the T110?
Click to expand...
Click to collapse
I am also a noob and I turned it off and it keeps going into recovery. I have a t110.
rajmisc said:
I am in this loop too! I am a n00b.. can you pl let me know how to reflash kernel on the T110?
Click to expand...
Click to collapse
erikaj28 said:
I am also a noob and I turned it off and it keeps going into recovery. I have a t110.
Click to expand...
Click to collapse
I didn't know how to just flash the kernal, so I flash the stock firmware with odin.
and everything works now.
download THIS
and extract the file, and use odin to flash it, doesn't take that long, but all the apps and settings will be reset.
To install stock firmware, go to this THREAD, and watch "GALAXY TAB 3 UNBRICK AND RESTORE", great tutorial by Rootjunky
ah_hin said:
I didn't know how to just flash the kernal, so I flash the stock firmware with odin.
and everything works now.
download THIS
and extract the file, and use odin to flash it, doesn't take that long, but all the apps and settings will be reset.
To install stock firmware, go to this THREAD, and watch "GALAXY TAB 3 UNBRICK AND RESTORE", great tutorial by Rootjunky
Click to expand...
Click to collapse
Awesome! Thanks a ton!
Flash Files For Tab 3 Kids HELP
I flashed the proper and updated files followed the video with rootjunky however i cant boot system just keeps going into recovery .. i made a backup but will it restore a backup from the moment after i flashed already ?
i have the kids mode Tab , HELP before KIDS get home lol
is The Tab 3 for kids supported , i just tried it on this yellow thing and now i have a dead banana lol
RK KINGKONG said:
I flashed the proper and updated files followed the video with rootjunky however i cant boot system just keeps going into recovery .. i made a backup but will it restore a backup from the moment after i flashed already ?
i have the kids mode Tab , HELP before KIDS get home lol
is The Tab 3 for kids supported , i just tried it on this yellow thing and now i have a dead banana lol
Click to expand...
Click to collapse
did you use the firmware that I linked to? you might have to find the version for the kid version, because the firmware I linked to is for the Tab 3 lite.
Sent from Sony ZL
how do i flash the full stock rom
ah_hin said:
did you use the firmware that I linked to? you might have to find the version for the kid version, because the firmware I linked to is for the Tab 3 lite.
Sent from Sony ZL
Click to expand...
Click to collapse
i got confused and tried using T-210 on T-2105 I can only boot to recovery or download
i just downloaded T2105UEAMI5_T2105XARAMI5_XAR stock firmware US i hope this is it but when i go to odin it wont find file , do i have to extract from zip ? but theres another file called SS_DL.dll so im not sure now
RK KINGKONG said:
i got confused and tried using T-210 on T-2105 I can only boot to recovery or download
i just downloaded T2105UEAMI5_T2105XARAMI5_XAR stock firmware US i hope this is it but when i go to odin it wont find file , do i have to extract from zip ? but theres another file called SS_DL.dll so im not sure now
Click to expand...
Click to collapse
Extract it. Odin needs ...tar.md5 files.
Sent from my SCH-I605
gr8nole said:
Extract it. Odin needs ...tar.md5 files.
Sent from my SCH-I605
Click to expand...
Click to collapse
got you and thank you for your time .. now does this other file even matter usually they dont come in these tar zips
SS_DL.dll whats that for
Same situation. I rooted it fine. Installed a custom rom. No issues. Then it asked to update the supersu binary. Did that and now it keeps booting into TWRP no matter what I do. Gonna start fresh and this time I'll not use TWRP to update the binary I guess.
To fix the booting in recovery
flash stock recovery with oodin
now go to stock recovery
select clear cache
it will show error (and recovery crashes) and tab will boot normally.
Hey guys,
i had CM13 on my phone an i wanted to try a new rom. So i did all the steps like it is written in the thread. After i used the wipe function my phone is always starting in twrp and i cant install a new rom and i also can't update my twrp.
Is my phone now ****ed up or can i do anything to save?
Thx
dg89 said:
Hey guys,
i had CM13 on my phone an i wanted to try a new rom. So i did all the steps like it is written in the thread. After i used the wipe function my phone is always starting in twrp and i cant install a new rom and i also can't update my twrp.
Is my phone now ****ed up or can i do anything to save?
Thx
Click to expand...
Click to collapse
You should be able to boot to bootloader if it's the same problem I have. You can then either flash the stock recovery or this version of TWRP which should fix the problem; https://forum.xda-developers.com/showpost.php?p=70296158&postcount=79
tiklmypikl said:
You should be able to boot to bootloader if it's the same problem I have. You can then either flash the stock recovery or this version of TWRP which should fix the problem; https://forum.xda-developers.com/showpost.php?p=70296158&postcount=79
Click to expand...
Click to collapse
thank you but its not working. i can't install the new version twrp and i also tried to install cm13 again and it is not working
dg89 said:
thank you but its not working. i can't install the new version twrp and i also tried to install cm13 again and it is not working
Click to expand...
Click to collapse
What verison of TWRP are you on?
tiklmypikl said:
What verison of TWRP are you on?
Click to expand...
Click to collapse
right now it is on v2.8.7.0 and i tried to install the new version but it's not working