Develop Bugs

changing the covers on the phone

Unfortunately, the back (side) casing where the stylus slots in has disintegrated
I have ordered a new casing, but wondered how much of a bugger it is to change over? Any opinions please.....
thanks

its not too bad, just alot of fiddling with clips and double sided tape holding parts together. If you have a look in the Wiki there is a link to a repair manual

mugglesquop said:
its not too bad, just alot of fiddling with clips and double sided tape holding parts together. If you have a look in the Wiki there is a link to a repair manual
Click to expand...
Click to collapse
thanks - will check it out

I've buggered my casing too, I didn't know you could get new ones. Where can I find one and more importantly, how much is it gonna sting?

furrytractor said:
I've buggered my casing too, I didn't know you could get new ones. Where can I find one and more importantly, how much is it gonna sting?
Click to expand...
Click to collapse
Fleabay - China $36 delivered to uk
http://cgi.ebay.co.uk/R519-housing-...ryZ15039QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
like this one...

which battery door to pick

I really like the look of the international galaxy s battery door but have also heard good things about the rubberized battery door. I was wondering if anyone uses either back covers if they could post how they like them so far and some pros and cons since im trying to decide which to buy

Hexmaster93 said:
I really like the look of the international galaxy s battery door but have also heard good things about the rubberized battery door. I was wondering if anyone uses either back covers if they could post how they like them so far and some pros and cons since im trying to decide which to buy
Click to expand...
Click to collapse
it just depends what youre into. i like the look of gloss over rubberized

From this I'm assuming the Vibrant back cover and i9000 covers are interchangable?

christeeezy said:
From this I'm assuming the Vibrant back cover and i9000 covers are interchangable?
Click to expand...
Click to collapse
yep. the vibrant and i9000actually share the same accessories as well. except theres slight differences in screen protectors because of the front facing camera, but nothing to major. if you're on eBay, youll find a lot more accessories if you search for "i9000"stuff instead of "vibrant "

brian_v3ntura said:
yep. the vibrant and i9000actually share the same accessories as well. except theres slight differences in screen protectors because of the front facing camera, but nothing to major. if you're on eBay, youll find a lot more accessories if you search for "i9000"stuff instead of "vibrant "
Click to expand...
Click to collapse
Good to know, thanks

where can i find rubberized battery doors?
Thanks

fatihaky said:
where can i find rubberized battery doors?
Thanks
Click to expand...
Click to collapse
http://cgi.ebay.com/Black-Back-Cove...Accessories&hash=item3a606cb12c#ht_2422wt_905
black rubberized
and
http://cgi.ebay.com/White-Back-Cove...Accessories&hash=item3a606cb1d8#ht_2422wt_905
white rubberized.
the seller also has green,blue, and red available. dont forget to hit the THANKS button =)

brian_v3ntura said:
cgi.ebay.com/Black-Back-Cover-Battery-Door-F-Samsung-Galaxy-S-i9000-/250725839148?pt=PDA_Accessories&hash=item3a606cb12c#ht_2422wt_905
black rubberized
and
cgi.ebay.com/White-Back-Cover-Battery-Door-F-Samsung-Galaxy-S-i9000-/250725839320?pt=PDA_Accessories&hash=item3a606cb1d8#ht_2422wt_905
white rubberized.
the seller also has green,blue, and red available. dont forget to hit the THANKS button =)
Click to expand...
Click to collapse
Are you sure these are rubberized? I couldn't find anything in any of the descriptions that said they were.

bighaus90 said:
Are you sure these are rubberized? I couldn't find anything in any of the descriptions that said they were.
Click to expand...
Click to collapse
positive. you can tell by the pics and i already received the white one

brian_v3ntura said:
positive. you can tell by the pics and i already received the white one
Click to expand...
Click to collapse
Maybe you should also tell them you were not too impressed with it at first, or give us an update.

SykesAT said:
Maybe you should also tell them you were not too impressed with it at first, or give us an update.
Click to expand...
Click to collapse
it grew on me..it does get dirty on the edges,and dust was in the paint job,but at least i got a refund and get to keep the battery door..so no complaints anymore =)

Pick the Samsung OEM door. These rubberized ones don't snap on as well and stick out on the sides ever so slightly. When I take off my mesh case it gets stuck and tries to take the battery door off completely, and that might result in the loss of power from the battery dropping.

any back covers with kick stands built in

[Official] Htc One X accessories

here you can have a look at the upcoming official htc one x accessories. thought it was a good idea to put them in a seperate thread
http://www.htcaccessorystore.com/uk/p_htc_phone.aspx?i=229814
heres some detailed info on some of the neat things http://www.mobilefun.co.uk/blog/2012/02/htc-one-x-accessories-available-first-from-mobile-fun/ but the one that catches my eye is the HTC One X Speaker Dock CR S650 can just keep my fingers crossed that someone releases a case which extends the pogo pins.
strange is that when i search for more images info etc on the s650 i get this dock http://www.parrotshopping.com/us/p_htc_item.aspx?i=229884 its the same on this this page http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=229884&phone=229814 and on alot of pages so i guess they got the images mixed up..

.
Thanks, your help is apreciated
Hope the rest of the incoming members help us keeping it like this!!!

orb3000 said:
Thanks, your help is apreciated
Hope the rest of the incoming members help us keeping it like this!!!
Click to expand...
Click to collapse
Sorry to break the bubble but they are not hehe so let's make the best of it and drool over some of the shiny things. *mmmmmmm shiny things*
Sent from my GT-I9100 using Tapatalk

will it be possible to stream MKV with "HTC Media Link HD for One X DG H200"?
if I use 3party player?

i suppose so?
isnt the media link suppose to mirror what is shown on the phone's screen?

Anyone interested in the official htc case with a polycarbonate back and a white front cover that acts as a stand?

jermx said:
Anyone interested in the official htc case with a polycarbonate back and a white front cover that acts as a stand?
Click to expand...
Click to collapse
u got a pic of it? cant seem to find it..

I think this is it: http://www.mobilefun.co.uk/htc-hc-v...ck-stand-for-htc-one-x-clear-white-p34370.htm

jermx said:
Anyone interested in the official htc case with a polycarbonate back and a white front cover that acts as a stand?
Click to expand...
Click to collapse
No.
Doesn't look good :/
Hopefully a third party will create a better one
Sent from my HTC HD2 using xda premium

waiting SGP accessories

arii1986 said:
I think this is it: http://www.mobilefun.co.uk/htc-hc-v...ck-stand-for-htc-one-x-clear-white-p34370.htm
Click to expand...
Click to collapse
ohh that one..
was wondering why is it call a hard shell when there is a flip there...
no way am i getting a casing with a flip cover on it.. hate those designs..

I ordered this case and it came this morning: http://www.amazon.co.uk/Rubberised-...MCYA/ref=sr_1_7?ie=UTF8&qid=1331982985&sr=8-7
First impressions- I don't like the way it's not going to completely cover the top or bottom of the phone, it also seems like the kind of case that clips on - not a big fan - (I'll see how it fits when I get the device) - material seems good though (hard plastic).
May be a good stop gap until casemate get their tough cases out (loath to pay 30 quid though, but always found them to offer A+ protection)

@jermx i think this is a stand becouse this case is transparent

arii1986 said:
I ordered this case and it came this morning: http://www.amazon.co.uk/Rubberised-...MCYA/ref=sr_1_7?ie=UTF8&qid=1331982985&sr=8-7
First impressions- I don't like the way it's not going to completely cover the top or bottom of the phone, it also seems like the kind of case that clips on - not a big fan - (I'll see how it fits when I get the device) - material seems good though (hard plastic).
May be a good stop gap until casemate get their tough cases out (loath to pay 30 quid though, but always found them to offer A+ protection)
Click to expand...
Click to collapse
would u be so kind as to share some shots of it? amazon does not have shots of the casing without the phone..
thanks in advance!

fi3ry_icy said:
would u be so kind as to share some shots of it? amazon does not have shots of the casing without the phone..
thanks in advance!
Click to expand...
Click to collapse
Here you go chap - please excuse the appalling photography skills

I want that Cradle, I want the Cradle!!
.
.
.
.
.
.
.
(I don't even have the phone................)

arii1986 said:
Here you go chap - please excuse the appalling photography skills
Click to expand...
Click to collapse
looking good..
thanks for the shots!!

i saw this:
http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=229884&phone=229814
but noticed something, and maybe its just me having a complete lack of sleep (long story), but it seems the dock uses micro usb port of the phone, but if you think about which way you dock the phone, wouldnt that be the wrong side of the phone?
can someone confirm, or am i going crazy?

makaveli25 said:
i saw this:
http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=229884&phone=229814
but noticed something, and maybe its just me having a complete lack of sleep (long story), but it seems the dock uses micro usb port of the phone, but if you think about which way you dock the phone, wouldnt that be the wrong side of the phone?
can someone confirm, or am i going crazy?
Click to expand...
Click to collapse
I thought the exact same thing earlier. The location of the micro usb plug on there would mean that the micro usb port on the phone would have to be on the right hand side, but in all pictures it's been on the left hand side.
Perhaps it's a mirror image, for some reason?

the phone has 5 metal dots on the back. these are the dock connection. not the micro-usb port.

Fix broken back cover - first attemt with superglue failed

Hi.
The back cover of my GNex is broken. From the camera to the end of the cover a crack of about 1 cm.
Can you tell me how to fix this without buying a new one? An attemt with superglue already failed, it cracked again at the same spot.

lordofazeroth said:
Hi.
The back cover of my GNex is broken. From the camera to the end of the cover a crack of about 1 cm.
Can you tell me how to fix this without buying a new one? An attemt with superglue already failed, it cracked again at the same spot.
Click to expand...
Click to collapse
A piece of plastic that thin does not have enough surface for glue to do its magic. You would need something that adheres to both sides then holds them together like tape but that would be ugly. But of you look on eBay they are literally a couple bucks. Is it a stock cover or the extended? I have an extra stock back i will send it to you for free. Let me no.
Sent from my Galaxy Nexus using xda premium

lordofazeroth said:
Hi.
The back cover of my GNex is broken. From the camera to the end of the cover a crack of about 1 cm.
Can you tell me how to fix this without buying a new one? An attemt with superglue already failed, it cracked again at the same spot.
Click to expand...
Click to collapse
tried glueing few times ended up at the repair shop

Thanks for the answers.
I have an extra stock back i will send it to you for free. Let me no.
Click to expand...
Click to collapse
Thanks a lot. But that would be a shipment to Europe, I think you were referring to a shipment within USA. :laugh:
Thank you again for the offer but due to the shipping cost over the pond I need to decline :good:

lordofazeroth said:
Thanks for the answers.
Thanks a lot. But that would be a shipment to Europe, I think you were referring to a shipment within USA. :laugh:
Thank you again for the offer but due to the shipping cost over the pond I need to decline :good:
Click to expand...
Click to collapse
Cool no prob man. Hope you get it fixed. All the best brother.
Sent from my Galaxy Nexus using xda premium

Does anyone here have a Toastmade skin?

I'm getting a HTC One (Silver or Black), and a toastmade wood skin.
Was wondering if anyone here is willing to post a picture of their phone with the skin on it to see what color/wood combination would look the best.
So far I'm feeling black/walnut, silver/bamboo

jammC said:
I'm getting a HTC One (Silver or Black), and a toastmade wood skin.
Was wondering if anyone here is willing to post a picture of their phone with the skin on it to see what color/wood combination would look the best.
So far I'm feeling black/walnut, silver/bamboo
Click to expand...
Click to collapse
Getting mine soon

jammC said:
I'm getting a HTC One (Silver or Black), and a toastmade wood skin.
Was wondering if anyone here is willing to post a picture of their phone with the skin on it to see what color/wood combination would look the best.
So far I'm feeling black/walnut, silver/bamboo
Click to expand...
Click to collapse
I have Silver/Walnut. I only installed the back.

DavidKotzebue said:
I have Silver/Walnut. I only installed the back.
Click to expand...
Click to collapse
Share a link where it is sold

Dnpech said:
Share a link where it is sold
Click to expand...
Click to collapse
http://toastmade.com/HTC_One.html

DavidKotzebue said:
http://toastmade.com/HTC_One.html
Click to expand...
Click to collapse
This stickers on the phone or bumper?

Dnpech said:
This stickers on the phone or bumper?
Click to expand...
Click to collapse
The pieces adhere directly to the phone with a 3M film. I only applied the back piece and not the sides, etc. Really doesn't provide much protection, I simply liked using wood and the aesthetics.

That looks really good, is it easily removable with no residue?

itsregie said:
That looks really good, is it easily removable with no residue?
Click to expand...
Click to collapse
Sigh.
I got mine today. I slightly misaligned the back plate on mine, and did not even push down on it. I tried to readjust it with no luck. I then heated it up with a blow dryer to fully remove it - I pulled a bit of the corner up and I immediately saw that this was not gonna be possible. There was going to be a TON of residue left on the back of my phone if I tried to fully take it off.
I'm extremely disappointed. Not at the product, but at myself and also how much of a hassle it is to remove it.
-The skin does look great if applied on correctly.
-Not sure if it's worth the $30 or not yet.
-The removal process is much harder than the site/packaging says it is.