STAX KERNEL FOR AOSP ROMS
Code:
/* *** Disclaimer
*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This kernel is based on AICP's 4.4 Kernel, so it won't work on official cyanogen. But should work on AICP, CAF PA, CAF CM, MAHDI & AOKP. (tested only in AICP)
Changelog:
Code:
v1.0 (initial):
-Governor "ondemand" as default (with a lot of optimizations)
-ROW as default I/O scheduler
-Sweep2Sleep
-Disabled a lot of debug spams
-Lower min_brightness (Much better for dark places (movie theater, etc) )
-Optimizations in gpu and processor
-Kernel bumped (should work with KK bootloader)
-Compiled with Linaro 4.9 (A15 optimizated) using -O2 flag
-All the AICP's kernel stuff:
-FAUX SOUND
-Intelliplug
-Updated Kernel (3.4.104)
-Powersuspend
-Better lowmemorykiller
-Etc & etc...
Credits:
AICP Team (for the kernel base) :good:
Savoca (helps me a lot) :angel:
Dorimanx (helps me too) :highfive:
FranciscoFranco (some kernel tweaks)
RenderBroken (some kernel tweaks)
Downloads:
MEGA Mirror
Source
XDA:DevDB Information
STAX KERNEL, Kernel for the LG G2
Contributors
daniel.stuart14
Kernel Special Features: This kernel have all the stuff from AICP's kernel, and my modifications. Like sweep2sleep, lower min_brightness, better ondemand gov, etc.
Version Information
Status: Alpha
Current Beta Version: 1.0
Beta Release Date: 2014-11-24
Created 2014-11-25
Last Updated 2014-11-25
O yee thanks bro.work ****ing nice cool on d803
---------- Post added at 02:21 AM ---------- Previous post was at 02:20 AM ----------
daniel.stuart14 said:
STAX KERNEL FOR AOSP ROMS
Code:
/* *** Disclaimer
*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This kernel is based on AICP's 4.4 Kernel, so it won't work on official cyanogen. But should work on AICP, PA, MAHDI & AOKP. (tested only in AICP)
Changelog:
Code:
v1.0 (initial):
-Governor "ondemand" as default (with a lot of optimizations)
-ROW as default I/O scheduler
-Sweep2Sleep
-Disabled a lot of debug spams
-Lower min_brightness (Much better for dark places (movie theater, etc) )
-Optimizations in gpu and processor
-Kernel bumped (should work with KK bootloader)
-Compiled with Linaro 4.9 (A15 optimizated) using -O2 flag
-All the AICP's kernel stuff:
-FAUX SOUND
-Intelliplug
-Updated Kernel (3.4.104)
-Powersuspend
-Better lowmemorykiller
-Etc & etc...
Credits:
AICP Team (for the kernel base) :good:
Savoca (helps me a lot) :angel:
Dorimanx (helps me too) :highfive:
FranciscoFranco (some kernel tweaks)
RenderBroken (some kernel tweaks)
Downloads:
MEGA Mirror
Source
XDA:DevDB Information
STAX KERNEL, Kernel for the LG G2
Contributors
daniel.stuart14
Kernel Special Features: This kernel have all the stuff from AICP's kernel, and my modifications. Like sweep2sleep, lower min_brightness, better ondemand gov, etc.
Version Information
Status: Alpha
Current Beta Version: 1.0
Beta Release Date: 2014-11-24
Created 2014-11-25
Last Updated 2014-11-24
Click to expand...
Click to collapse
Upload on dropbox or some .mega not work with folder
Just a note, it'll only work on unofficial KK PA because houston's builds use his own sources. And looks nice! Might take for a spin one day when I get a new screen.
leos0000 said:
O yee thanks bro.work ****ing nice cool on d803
---------- Post added at 02:21 AM ---------- Previous post was at 02:20 AM ----------
Upload on dropbox or some .mega not work with folder
Click to expand...
Click to collapse
Never quote an op, ever.
Keep it up mate! everyone here for sure is happy right now for the new kernel you've contributed to our community :good:
tsunamical said:
Just a note, it'll only work on unofficial KK PA because houston's builds use his own sources. And looks nice! Might take for a spin one day when I get a new screen.
Click to expand...
Click to collapse
You're right! I change the OP. Thx!
1.1 is coming! With changes in the gpu driver & power driver. For a better battery/graphics.
thanks for the kernel mate !! good work
Thanks for your precious time and effort and most of all thank you for supporting F320!! Looking forward to test this out and a Lollipop kernel from you..Keep up the good work.
Does it work on stock 4.4?
no
kaedeyip said:
Does it work on stock 4.4?
Click to expand...
Click to collapse
the thread title says AOSP not stock
can you make F2FS Kernel too @daniel.stuart14
D802 user here!
@bart452 Patch
thanks in advance!
fLipz said:
can you make F2FS Kernel too @daniel.stuart14
D802 user here!
@bart452 Patch
thanks in advance!
Click to expand...
Click to collapse
I'm just doing some changes in GPU, and when I finish it, I'll start to port F2FS.
1.1 is coming.
Currently using this. I'll post battery stats sometime later, and I haven't had any crashes, reboots, or SoDs either.
Sent From Capsule Corp.
Hello
Does it works with SOKP rom ?
Thanks in advance
Envoyé de mon LG-D802 en utilisant Tapatalk
Keep getting "Folders not yet supported" error while trying to download... Never encountered this before so do you have another download link or know of a fix??? Thanks in advance and thank you for your contribution to our community!
undeadking said:
Keep getting "Folders not yet supported" error while trying to download... Never encountered this before so do you have another download link or know of a fix??? Thanks in advance and thank you for your contribution to our community!
Click to expand...
Click to collapse
Are you downloading from a PC or your phone?
Sent From Capsule Corp.
Guys, I'm 99% sure that v1.1 will come today.
I'll create a mirror in mediafire, too.
guys, I have a problem with LCD of my device. (black lines), and I'll send it to LG.
So, for now, I'll stop the updates.
daniel.stuart14 said:
guys, I have a problem with LCD of my device. (black lines), and I'll send it to LG.
So, for now, I'll stop the updates.
Click to expand...
Click to collapse
Check out the permanent screen damage thread in G2 General... Ive went through 3 G2's due to the issue- thermally governed TWRP dr87's or blastagator's 2.8.0.1/2.8.1.1 are mandatory with this device... Oh and DON'T SEND TO LG! Verizon swapped all of mine at the store- maybe give that a try before mailing it off...
undeadking said:
Check out the permanent screen damage thread in G2 General... Ive went through 3 G2's due to the issue- thermally governed TWRP dr87's or blastagator's 2.8.0.1/2.8.1.1 are mandatory with this device... Oh and DON'T SEND TO LG! Verizon swapped all of mine at the store- maybe give that a try before mailing it off...
Click to expand...
Click to collapse
Yeah, I was using the blastagator's 2.8.1.1.
Here in brazil, the LG take care about warranty, not the carrier.
But thx,
Related
[size=+1]Welcome to Skatter Kernel forum.[/size]
Today I am very proud to release the Skatter Kernel to you guys, I've done hundreds of tests to see what features function well, and which one's don't. The idea behind this kernel is to be able to customize it the way you want, with the best battery possible
Now... let's take a look and see what's inside this bad boy.
Click to expand...
Click to collapse
Skatter Kernel-v2 is a complete rewrite of v1. What makes this version of the kernel so special?
It's faster, even more stable, and has the ability to run any governor from a 3.10.y kernel.
I've ran many tests and can say, these governors have been playing very nicely with our d2 device. I have not added any junk commits, or any that would cause any battery drain. Also I'm sorry for anyone on marshmallow... but kernel from now on is only going to be nougat and up.
Also I would like to make an introduction to my "Skateractive" governor! :victory:
What does the Skateractive governor do anyways?
Code:
This governor is based on the linux 3.10.y Interactive governor.
I've written it to be mostly a "screen-off profiling" governor.
Meaning, I've added tunables that allow you to customize the governor while the screen is off.
These are...
Timer_rate_multiplier: Name speaks for itself, how many times to multiply timer_rate on screen off. Max number is 10.
Screen_off_maxfreq: Set the limit the max frequency can be reached on screen off.
Screen_off_maxfreq_single_core: If you're like me and use hotplugs you'll notice it can get a bit laggy with music playback when one core is online & max freq is 702mhz. So add a frequency limit for when only one core is online and the screen is off. :good:
* Not a tunable: But enabled powersave bias on screen off & on screen-on back to normal.
Also stripped governor of any unneeded code. For best performance.
Features
* Compiled with a highly optimized Uber 7.x TC
* Tons of optimizations (-Ofast, Graphite, Cortex-A15) and lots more :good:
* CPU UC/OC from 162MHz to 1836Mhz
* Set to Permissive
* Net Speed Tweak
* Decreased time to enter deep sleep
* Optimized GPU
* Enabled Low Power Memory Mode
* Quick Wakeup Driver
* Some Aggressive Seeder Tweaks
* Optimized Square Root Algorithm
* More memory from loggers (Cause the more RAM, the better)
* Screen Tweaks for filling blank spots with more color
* Voltage Table, for your UV/OV Needs
* Tweak to disable Powersuspend when State Notifier is enabled.
* Set standby frequency to 54Mhz.
* Tweaked to lower Thermal throttle on screen off.
* UKSM for better ram, set to not consume so much battery.
* Frandom.
Decimalman's features
* Overclocked GPU to 600, modded & upped to 750Mhz.
* And his super badass tierservative & freelunch governors :good:
* Fast charge patch, no need to diconnect :good:
* Tiered GPU Governor, very nice with frequencies.
Faux123's Features
* Fauxsound
* Powersuspend v1.7
* Dynamic Fsync
* Simple GPU Governor
I/O Schedulers
* Sio
* Sioplus
* V(r)
* Noop
* Zen
* Fifo
* TripNDroid
* Fiops
* Maple
Hotplugs
* MPDecision
* Bricked Hotplug
* Blu_Plug
* Thunderplug v5.4
* AutoSMP
* Intelliplug
* Alucard
* State Helper
* MSM Hotplug
* Skater Hotplug
x MSM Sleeper
x Zen Decision
CPU Governors
* Alucard
* Blu_Active (Latest version)
* Chill
* Conservative (3.10.y version)
* Cultivation
* Cyan (For those gamers, do not use with hotplugs.)
* Darkness
* Despair
* ElementalX v2
* Freelunch
* Interactive
* Lionfish
* Lionheart
* NIghtmare
* Ondemand (3.10.y version)
* Performance
* Powersave
* Relaxed
* Skateractive (Default)
* Skatter_Core
* Smartmax
* Smartmax_EPS
* Tierservative.
Instructions
1.) Make... a... [size=+1]BACKUP[/size]
2.) Download kernel & copy it to sdcard
3.) Flash
4.) Wipe dalvik-cache & cache
5.) Most importantly, Enjoy :good:
Downloads
Right Here
Modded Kernel Adiutor
Right Here
* If anyone needs a mirror link, just ask and I will upload
Contributors
* A special thanks to @bthorne79 for helping me get started on this
* Another special thanks to the beast himself @decimalman
for helping me with a ton of noob questions & especially for the patchs:good:
@faux123 for all his awesome features
@neobuddy for helping me out with the blu_plug driver
@invisiblek for keeping this awesome device alive
@canodroid15 for running my test builds :highfive:
Everyone at CM & everyone else who I forgot
Disclaimer:
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
XDA:DevDB Information
Skatter Kernel, Kernel for the T-Mobile Samsung Galaxy S III
Contributors
Lonelyskatter12, bthorne79, decimalman
Source Code: https://github.com/Lonelyoneskatter/skatter_d2_kernel
Kernel Special Features:
Version Information
Status: Stable
Stable Release Date: 2017-01-29
Created 2016-09-30
Last Updated 2017-11-03
Kernel sounds interesting, but the link is dead for me. Can you repost it?
Link is broke. Please post working link. Looking forward to trying this kernel out
Daemondancer said:
Kernel sounds interesting, but the link is dead for me. Can you repost it?
Click to expand...
Click to collapse
hatchet13rydin69 said:
Link is broke. Please post working link. Looking forward to trying this kernel out
Click to expand...
Click to collapse
Links up, let me know what you guys think :good:
Downloading now will report back with results
Edit.....
So far it very fast and responsive. Battery life is excellent especially considering the fact that I need a new battery as the one I'm using is very old and doesn't like to hold a charge. Will upload screenshots of battery stats after work.
Keep up the awesome work!!!!!!!! :good:
hatchet13rydin69 said:
Downloading now will report back with results
Edit.....
So far it very fast and responsive. Battery life is excellent especially considering the fact that I need a new battery as the one I'm using is very old and doesn't like to hold a charge. Will upload screenshots of battery stats after work.
Keep up the awesome work!!!!!!!! :good:
Click to expand...
Click to collapse
The purpose of this kernel my friend battery & performance I'd love to see some stats & thank you I will :victory:
Lonelyskatter12 said:
The purpose of this kernel my friend battery & performance I'd love to see some stats & thank you I will :victory:
Click to expand...
Click to collapse
Sorry for not getting back to you with stats and screenshots. Had some family issues that couldn't be left unattended. I'm sorry to say that my s3 was unfortunately stolen from me before I had uploaded my results to my drive account. I will say that this kernel made my device perform like new. Which was amazing as the battery was on its last leg. I wonder if this kernel could be built for the Samsung Galaxy Core Prime SM-G360T1? If you need anything to do so let me know. Still kinda a noob but with a lil guidance I can get any source codes you may need for this device. Let me say this was a truly magnificent piece of work for the s3. Thanks in advance
Was running the kernel on OctOs-M and it was quite good. I started using SlimRom though and it seems that your kernel doesn't play nice with it. Everything seems ok but my SIM isn't detected. Using the SlimRom kernel the problem doesn't happen. Would love to use this kernel again!
Compatibility question.
I like the way this sounds, but I've only ever flashed ROM's. Never a Kernel. I was wondering if this kernel would work with what I'm running right now?
### My current build info
ro.build.PDA=T999UVUEMJC
ro.build.characteristics= tmo
ro.build.display.id= JSS15J.T999UVUEMJC
ro.build.fingerprint= samsung/d2tmo/d2tmo:4.3/JSS15J/T999UVUEMJC:user/release-keys
ro.build.hidden_ver= T999UVUEMJC
ro.build.product= d2tmo
ro.build.version.codename= REL
ro.build.version.incremental= T999UVUEMJC
ro.build.version.release= 4.3
ro.build.version.sdk= 18
ro.board.platform= msm8960
###KERNEL INFO
Linux
3.0.31-1804024
#1 SMP PREEMPT Sat Oct 5 00:13:48 KST 2013
armv7
GNU/Linux
Please let me know, thank you.
HollyWood88 said:
I like the way this sounds, but I've only ever flashed ROM's. Never a Kernel. I was wondering if this kernel would work with what I'm running right now?
### My current build info
ro.build.PDA=T999UVUEMJC
ro.build.characteristics= tmo
ro.build.display.id= JSS15J.T999UVUEMJC
ro.build.fingerprint= samsung/d2tmo/d2tmo:4.3/JSS15J/T999UVUEMJC:user/release-keys
ro.build.hidden_ver= T999UVUEMJC
ro.build.product= d2tmo
ro.build.version.codename= REL
ro.build.version.incremental= T999UVUEMJC
ro.build.version.release= 4.3
ro.build.version.sdk= 18
ro.board.platform= msm8960
###KERNEL INFO
Linux
3.0.31-1804024
#1 SMP PREEMPT Sat Oct 5 00:13:48 KST 2013
armv7
GNU/Linux
Please let me know, thank you.
Click to expand...
Click to collapse
I was running this kernel on the same model and baseband with spirit rom Kit Kat 4.2.2. It was definitely a huge improvement over the stock kernel. Very responsive and great battery life. I would definitely recommend this kernel. Just make sure to make a backup of your old kernel in twrp manager before. Better safe than sorry.
OK, I'll give her a whirl and see how it does. Thanks @hatchet13rydin69
WHOOP WHOOP!
hatchet13rydin69 said:
I was running this kernel on the same model and baseband with spirit rom Kit Kat 4.2.2. It was definitely a huge improvement over the stock kernel. Very responsive and great battery life. I would definitely recommend this kernel. Just make sure to make a backup of your old kernel in twrp manager before. Better safe than sorry.
Click to expand...
Click to collapse
HollyWood88 said:
OK, I'll give her a whirl and see how it does. Thanks @hatchet13rydin69
WHOOP WHOOP![/QUOTE)
Don't thank me. All thanks go to lonelyskatter12 for his work on this awesome kernel and to all those that helped him compile it and test it. Hoping maybe we could get something like this for the Galaxy Core Prime
Click to expand...
Click to collapse
I have to say, it's a very nice kernel in terms of giving out great performance. However, every Rom i flash this kernel in, it seems to break the functionality of my baseband causing an error for my sim card not to detect. It's with the latest build of OCT-M-R3 build 10/25 and Slim Roms build 10/29 that I tried out with.
Any fixes for it?
Help
I'm new to this....Only flash ROM's...No Kernel yet.
My last update on my SGH-T999 is....cm-13.0-20161104-NIGHTLY-d2tmo
So for me is it good solution to flash that kernel on my phone?
I see there's a lot of function and updates that I don't have.
Thank You!!
:good:
Maxrom said:
I'm new to this....Only flash ROM's...No Kernel yet.
My last update on my SGH-T999 is....cm-13.0-20161104-NIGHTLY-d2tmo
So for me is it good solution to flash that kernel on my phone?
I see there's a lot of function and updates that I don't have.
Thank You!!
:good:
Click to expand...
Click to collapse
Just wait for the next kernel update, I hear SIM isn't detected on newer ROM updates.
And its easy.
1.) Copy zip to sdcard
2.) Wipe dalvik-cache & cache
3.) Flash kernel zip
4.) Reboot
5.) Enjoy it cx
Lonelyskatter12 said:
Just wait for the next kernel update, I hear SIM isn't detected on newer ROM updates.
And its easy.
1.) Copy zip to sdcard
2.) Wipe dalvik-cache & cache
3.) Flash kernel zip
4.) Reboot
5.) Enjoy it cx
Click to expand...
Click to collapse
Thank's Lonelyskatter12 ......For the SIM issue...It doesn't bother me.
I don't have a sim install on that phone.
I use it for testing and educational purpose....
:good::good:
[size=+1]Changelog[/size]
* Added 2 governors (Intellidemand & Ondemandplus)
* Added Power Efficient Workqueues
* Added The Intelli_plug 5.2 driver
* In sync with CM
* Added OOM throttle
* A few hotplug fixes. Still have more to do but this'll do until they are more stable.
* Added toggle for Gentle Fair Sleepers & Arch Power
[size=+1]Note:[/size]
*** Even tho linux version still says 3.4.112 it has the necessary patches for the "Dirty COW" exploit. Linux version will remain 3.4.112 as I have chosen to wait until CM officially merges 3.4.113 ***
thanks to @canodroid15 for notifying me & @decimalman for confirming the patch is in the kernel :highfive:
Wooty woot woot! ? Thy master is at it again! ??
Lonelyskatter12 said:
[size=+1]Changelog[/size]
* Added 2 governors (Intellidemand & Ondemandplus)
* Added Power Efficient Workqueues
* Added The Intelli_plug 5.2 driver
* In sync with CM
* Added OOM throttle
* A few hotplug fixes. Still have more to do but this'll do until they're are more stable.
* Added toggle for Gentle Fair Sleepers & Arch Power
[size=+1]Note:[/size]
*** Even tho linux version still says 3.4.112 it has the necessary patches for the "Dirty COW" exploit. Linux version will remain 3.4.112 as I have chosen to wait until CM officially merges 3.4.113 ***
thanks to @canodroid15 for notifying me & @decimalman for confirming the patch is in the kernel :highfive:
Click to expand...
Click to collapse
Is the sim issue fixed? I'd like to try this kernel
Sent from my SGH-T999 using XDA-Developers mobile app
Shack70 said:
Is the sim issue fixed? I'd like to try this kernel
Sent from my SGH-T999 using XDA-Developers mobile app
Click to expand...
Click to collapse
Yes
QUARK KERNEL For Moto G4 Plus (Lineage Extended)
#include
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. YOU are choosing to make these modificiations, and
* if you point your finger at me for messing up your device, I will
* laugh at you.
Click to expand...
Click to collapse
INTRODUCTION:
Hello everyone, this is my personal kernel for the Moto G4 Plus. This version is based on Lineage OS kernel source with some additional patches.
FEATURES:
Compiled using linaro 6.3.1
Init.d support
Disabled Gentle fair sleepers
USB Turbo Charge Support
Added FIOPS I/O Schedule
Added SIO I/O Scheduler
Added BFQ scheduler
Governors enabled:
Lionfish
Dancedance
Lionheart
Smartass2
Bioshock
Nightmare
Alucard
Conservativex
CPU Hotplug Enabled
Added bunches of TCP Congestion Algorithm
CPU Boost
zRAM Support
Fingerprint Sensor As Home
LED Notification While Charging (Thankz to @vache)
ZRAM Compression
Adreno idler
Dynamic fsync
DownloadsGet it here
Instructions
Flash through TWRP
Credits/Thanks:
- Mororola for sources
- linus for his amazing kernel source
- @vache and @Shreps for base kernel source
Compatibility
- Will work on any roms using LineageOS kernel source as base. (LineageOS,Beanstalk,AOSPExtended,OctOS)
- You can try on other roms and report me back . (if enforcing didn't work try permissive. Be patient while the kernel boots.)
- If you find sensors doesn't work .use this
- If your root breaks.. flash su
XDA:DevDB Information
Quark Kernel, Kernel for the Moto G4 Plus
Contributors
rahulsnair
Source Code: https://github.com/rahulsnair/android_kernel_motorola_msm8952
Kernel Special Features:
Version Information
Status: Beta
Created 2016-10-08
Last Updated 2017-03-18
Changelog
1.0
-Initial Release
1.1
-Added Zen I/O Scheduler
2.0
-Switched to Sabermod toolchain
-Now supports Android N based roms
05012017
-Switched back to UBERTC-6.0
-Synced to CM kernel source
25012017
-Using linaro from now on
-ZRAM compression
-Adreno idler
-LZ4 ZRAM compression
-Dynamic fsync
@rahulsnair Nice work Buddy
You are on fire my friend
do u know if this will work on your teamoct os?
Dont know how, dont know why but i installed and i dont know why but everything works good
It works great in CM 13.0 XT1641
A can confirm that it works on octos xt1622 smooth as and great kernel thanks dev for the rom and kernel keep up the good work??
Working great so far on RR xt1625. You're killing it.
Is this kernel for custom ROMs only, or will it work with stock too?
Working on my xt1625. Only thing I noticed is that the text is sort of blurry
when using the browser when you touch the screen, then it's clear. Also seems to be a yellowish tint, not quite sure how to explain it. Anyone else seeing this?
skalnas said:
Working on my xt1625. Only thing I noticed is that the text is sort of blurry
when using the browser when you touch the screen, then it's clear. Also seems to be a yellowish tint, not quite sure how to explain it. Anyone else seeing this?
Click to expand...
Click to collapse
Wich ROM are you using? I also have xt1625 want to test
:good:
Teamoct os
rahulsnair said:
Changelog
1.1
-Initial Release
1.1
-Added Zen I/O Scheduler
Click to expand...
Click to collapse
Hey Bro, I Found Something, The Last 4 Cores (Big) Are Not Online 99% Of The Time.
Krsambhav16 said:
Hey Bro, I Found Something, The Last 4 Cores (Big) Are Not Online 99% Of The Time.
Click to expand...
Click to collapse
It's actually the first 4 cores (big cores) that are offline. It's good that they're offline most of the time, you will see them go online during heavy load such as installing an app or 10-bit H.264 video playback.
doomed151 said:
It's actually the first 4 cores (big cores) that are offline. It's good that they're offline most of the time, you will see them go online during heavy load such as installing an app or 10-bit H.264 video playback.
Click to expand...
Click to collapse
Okay Bro Thanx, I Thought That My Cores Have Been Damaged.
Bootloop in (xt1626) rom Temasek's CM13 - v11
Did the download link disappear or am I just dumb and can't see it
khaoticking said:
Did the download link disappear or am I just dumb and can't see it
Click to expand...
Click to collapse
Is there, see again
Hello, just report. This Kernel work very well on my XT1642 with the last RR ROM. Good luck.
Code:
Code:
/* *** Disclaimer
* Your Warranty is now Void!
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
* BOOM goes the Dynamite
*/
introduction
Hello everyone,
the goal of this kernel is to be stable and have many features
Features
-Compiled With Linaro 7.3
-CPU Governors:All stock+bioshock,blu_active,impulse,chill,relaxed,despair,intelliactive
-I/O sched: All stock+Sio,Sioplus,Zen,Fiops,Maple
-Disabled force-encrypition and Pre-rooted(magisk)(only stock version)
-Various options for input boost and touchboost
-KCAL V2
-Faux Sound
-Adreno idler
-WQ Power saving
-Blacklight dimmer
-Wireguard
-Boeffla wl blocker
-Some patches to optimize performance and battery life
-Minor fixs
-Other features and tweaks(check github)
Installation instructions
Stock:
-adb reboot bootloader
-fastboot flash boot boot.img
or
-fastboot boot boot.img(if you want to test it)
-fastboot reboot
Other versions
-reboot in recovery
-wipe cache and dalvik cache(recommanded)
-flash kernel
DOWNLOADS
PIE
Oreo
STOCK(DEPRECATED)
LOS14.1 & LOS14.1 Based(DEPRECATED)
CAF N based(DEPRECATED)
Thanks To
Code:
-Google
-Nexbit
-franciscofranco
-flar2
-frap129
-nathanchance
-all of commited in their sources & all of xda developers
XDA:DevDB Information
Pop kernel, Kernel for the Nextbit Robin
Contributors
linckandrea
Source
Pop kernel(STOCK)
Pop kernel(N/O/P)
Version Information
Status: Testing
Created 2017-11-17
Last Updated 2019-01-30
reserved
Thanks. Nice to see something new for our device.
Thank you for this. I'm going to test it out. I'm really happy to see a stock kernel with added features. I'm already rooted with SuperSU, I hope it won't conflict with magisk root in the kernel.
Subscribed to this thread, I am looking forward to knowing how good this kernel is for everyone.
L3R0N said:
Thank you for this. I'm going to test it out. I'm really happy to see a stock kernel with added features. I'm already rooted with SuperSU, I hope it won't conflict with magisk root in the kernel.
Click to expand...
Click to collapse
I think it is better to unroot before flashing the kernel(to avoid any complications)
Update
I added and changed many things in this version...
Changelog
1.Added Kcal V2
2.added Faux Sound control
3.Added fsync on/off support.
4.Msm: vidc: disable CPU L2 cache PC during video sessions
5.Added wakelock toggle for some wakelock(I will remove it in the next one to put boeffla_wl_blocker)
6.Add Impulse governor
7.General improves and bug fixes(see Github commits history)
DOWNLOAD
Benchmark result
governor:interactive
I/O sched Fiops
note:the results are relative
How is the battery life for you?
What was it before and whats its now?
/root said:
How is the battery life for you?
What was it before and whats its now?
Click to expand...
Click to collapse
Pretty good ( SOT:4/5h with 4g)
I'm working on a version for LOS 14.1 (Probably also works on LOS based roms) who wants to do testers, send me a pm
linckandrea said:
I'm working on a version for LOS 14.1 (Probably also works on LOS based roms) who wants to do testers, send me a pm
Click to expand...
Click to collapse
I'd be more than happy to test for you.
Is this kernel for 7.1.1 nougat or marshmallow stock?
StLucia said:
Is this kernel for 7.1.1 nougat or marshmallow stock?
Click to expand...
Click to collapse
This is for Stock Nougat (7.1.1).
L3R0N said:
I'd be more than happy to test for you.
Click to expand...
Click to collapse
thank you but it is no longer necessary
New Update
I've created a version for LOS 14.1 and LOS 14.1-based
Changelog:
1.Disable some kernel debug
2.Disable add_random
3.Add chill and relaxed governor
4.Optimized KSM
5.General improves and bug fixes(see Github commits history)
DOWNLOAD
DOWNLOAD(LOS14.1 & LOS14.1 based)
Thanks to @TheC92 @Sparubens @NurKeinNeid
for being a tester, and giving me their opinion on the kernel
linckandrea said:
New Update
I've created a version for LOS 14.1 and LOS 14.1-based
Changelog:
1.Disable some kernel debug
2.Disable add_random
3.Add chill and relaxed governor
4.Optimized KSM
5.General improves and bug fixes(see Github commits history)
Click to expand...
Click to collapse
Downloaded twice but get Error 1 when flashing.
Code:
Archive: /sdcard/Download/Pop.kernel(ether-LOS).zip
inflating: anykernel.sh
inflating: Image.gz-dtb
unzip: crc error
ls: /tmp/anykernel/tools: No such file or directory
Unzip failed. Aborting...
umount: can't umount /system: Invalid argument
Updater process ended with ERROR: 1
linckandrea said:
New Update
I've created a version for LOS 14.1 and LOS 14.1-based
Changelog:
1.Disable some kernel debug
2.Disable add_random
3.Add chill and relaxed governor
4.Optimized KSM
5.General improves and bug fixes(see Github commits history)
Click to expand...
Click to collapse
LOS ver.
Is it a version with additional updates in the test version? git has a new commit, but the newly downloaded file is the same as the test version.
L3R0N said:
Downloaded twice but get Error 1 when flashing.
Click to expand...
Click to collapse
strange try to download it with pc and after unzip it
TheC92 said:
LOS ver.
Is it a version with additional updates in the test version? git has a new commit, but the newly downloaded file is the same as the test version.
Click to expand...
Click to collapse
Is the same version you tested
(Because is stable)
linckandrea said:
strange try to download it with pc and after unzip it.
Click to expand...
Click to collapse
It does unzip but with a crc error. I've downloaded 6 times already.
Mady's Xtended Kernel for OnePlus 5/T Unified
Standard Disclaimer:-
Code:
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about features included in this Kernel before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at us for messing up your device, we will laugh at you.
*/
General Information:-
Code:
This is only kernel and not a ROM. Be sure to flash a ROM first and then the kernel to boot into system. Or otherwise don't come yelling that it didn't booted...:p We are good in helping only if you're good at reading and explaining, if not then please don't flash this.
Credits:-
Code:
@martinusbe
@Sultanxda
@ GZR Team
@ Devs from whom we have used the commits.
@ Users flashing & Testing this.
@ Lastly our Team Xtended (Yeah we too worked hard by sleeping 9-10 hours every night and even in days whenever got some free time)
@SuperDroidBond - I don't even know why I am in the credit list...;)
@simedrut - Why I'm in the credit list? :)
Features in Kernel:-
Code:
* / *
* Latest Upstream From GZR-Kernels.
* Block Unnecessary Wake-ups
* Default Boeffola Wake-locks Included
* Some normal inits.
* / *
Future Plans:-
Code:
* / *
* Wireguard.
* smartmax gov
* alucard gov
* other if any, we feel good to add.
* / *
Some Information:-
1) Battery/SOT ?
Ans:- This is contradictory thing so let the kernel settle and then check yourself and report back.
2) How frequent kernel gets updated ?
Ans:- It can be daily or weekly or hourly as well.......
3) Feature request ?
Ans:- Always Welcome. We will appreciate, if the request comes with proper commits and links.
4) What all ROM/s it's working ?
Ans:- ROMs working - Nitrogen OS, Z-unleashed, Cardinal Xtended (test 8.1 build), GZOSP & based ROMs. Others please do flash and let us know so that we can update the same in the list.
5) I am interested in testing ?
Ans:- Please join our Telegram Testing Group - Xtended Testing
Download Information:-
Mady's Xtended Kernel
Lastly, We love to have feedback related ethical improvements, feature improvements or something from which we can learn.
Code:
[B][U]Good Words:-[/U][/B]
Both Good & Bad Friends are important. Good friends will give you memories while Bad Friends will give lessons.
XDA:DevDB Information
Mady's Xtended Kernel, Kernel for the OnePlus 5
Contributors
simedrut, mady51, martinusbe
Source Code: https://github.com/mady51/kernel_oneplus_msm8998
Kernel Special Features: This is GZR-Kernel with all due permissions from GZR Team
Version Information
Status: Stable
Current Stable Version: Latest
Stable Release Date: 2018-03-18
Created 2018-03-19
Last Updated 2019-03-25
Reserved
Reserved
Unified ?
Something new to try
It's really pleasing to see that team is going on right direction, and thanks @mady51 brother to share your work.
Really great and appreciating..[emoji106]
This is for custom ROMs only, correct?
Veliion said:
This is for custom ROMs only, correct?
Click to expand...
Click to collapse
I'd assume so, all the supported ROMs in the OP are AOSP based.
Veliion said:
This is for custom ROMs only, correct?
Click to expand...
Click to collapse
Yes
@simedrut how about idle drain for you ?
mukesh22584 said:
@simedrut how about idle drain for you ?
Click to expand...
Click to collapse
2%/h... Very good here
simedrut said:
2%/h... Very good here
Click to expand...
Click to collapse
2% is bad bro. Check bbs and share me
X2 version is up!
Upstreamed to latest linux stable (4.4.123) and more improvements for battery life and perfomance.
DOWNLOAD KERNEL LINK
update time - MadKernel-Unified-OP5T-Pie-4.zip
changes -
kernel: time: reduce ntp wakeups
disable crc check
msm: kgsl: Increase worker thread priority
arm64: crypto: Improve target optimization flags & other flags for optimization
qcom-cpufreq: Use CLKFLAG_NO_RATE_CACHE
wl_blocker: add more wakelocks to the default block list
drivers/slimbus: Overclock slimbus
Optimized Console FrameBuffer for upto 70% increase in Performance
various - queue work on system_power_efficient_wq
msm: slimbus: some more tweaks and added new freqs
arm64: bpf: optimize JMP_CALL
mm: Decrease swappiness
Introducing KLapse - A kernel level livedisplay module v4.0
Interactive tweaks
CpuIdle tweaks
reduce wlan wakelock time even more
cpu-boost optimizatoins
thermal optimization
Improve stability & camera power consumption
Added AdrenoBoost (disabled by default)
disable RX Unicast wakelocks
lots of other tweaks and optimizations.
flash and enjoy
simedrut said:
2%/h... Very good here
Click to expand...
Click to collapse
Idle drain should be less than 1% unless you are playing music
Added to the OnePlus 5 Index Thread here.
update - MadKernel-Unified-Op5T-Pie-5.zip
changes -
Interactive tweaks for better battery without loss in smoothness
reduce some latency
thermal tweaks
Tripndroid tweaks
fixed ssusb wakelock issue (mostly) which keeping device awake when plug/unplug
msm8998-gpu.dtsi: Enable NAP state
add no-wakeup-src-in-hostmode
-thanks
mady51 said:
changes -
fixed ssusb wakelock issue (mostly) which keeping device awake when plug/unplug
Click to expand...
Click to collapse
@sleepwalking0593 Maybe try this kernel (the above is from the latest changelog)?
shadowstep said:
@sleepwalking0593 Maybe try this kernel (the above is from the latest changelog)?
Click to expand...
Click to collapse
But i didn't get this wakelocks on derpfest. I have uploaded my screenshots in derpfest group. I'm not defaming or lying about anything. I have shifted back to oos now because of bad idle drain. I might flash it if i use custom ROM.
mady51 said:
update - MadKernel-Unified-Op5T-Pie-5.zip
changes -
Interactive tweaks for better battery without loss in smoothness
reduce some latency
thermal tweaks
Tripndroid tweaks
fixed ssusb wakelock issue (mostly) which keeping device awake when plug/unplug
msm8998-gpu.dtsi: Enable NAP state
add no-wakeup-src-in-hostmode
-thanks
Click to expand...
Click to collapse
Can you link me the commit that fixed ssusb wakelock issue,i can link it to Franco so that he can fix in his kernel too. Thanks. Also Sian for codename phoenix ROM.
THUNDERSTORM CAF KERNEL
Code:
/*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Tested on both AOSP/LineageOS (Oreo & Pie) treble based ROMs
Maybe work on Oreo and Pie stock AndroidOne ROMs
* Have a WonderFull Battery & Performance *
Features:
Pie CAF & Prima Tag: LA.UM.7.5.r1-04100-8x96.0
Linux Upstream: 3.18.135
KCAL color control
exFAT Support (sdfatfs)
NTFS readonly support
Wireguard VPN Support
Gaming performance (v1): lowlatency / 1000Hz
CPU governors: darkness, zzmoove, interactive, performance, conservative, userspace, powerspace, ondemand (default)
IO schedulers: noop, deadline, bfq, zen, maple, cfq (default)
TCP congestion algorithms: cubic, reno, westwood (default)
Fsync on/off support
IP Tables TTL support
Adreno Idler included
Sound gain control
Installer uncluded fix for Wi-Fi SELinux permission
Download:
ThunderStorm-CAF-daisy-zero-20190302-1022_v2.zip (16.37 MB)
MD5: 9789 e3e543f75c95e8e77f77e696 6153
Installations:
Backup boot.img if you want to go back
Backup /system/lib/modules and /vendor/lib/modules folders
Flash Zip file with any TWRP recovery, reboot and enjoy
Notice: If you have Magisk with modules installed maybe you get bootloop. Try reinstall Magisk after kernel. If not help, burn Magisk on fire!
Right way: flash stock boot.img, then custom kernel, then other stuff like twrp and magisk
Issues:
- dt2w
- missed sound in call on the Pie base
XDA:DevDB Information
ThunderStorm CAF Kernel for Xiaomi Mi A2 Lite "daisy"
Contributors
RevanthTolety (owner)
Source Code of ThunderStorm kernel:
https://github.com/Revanth/kernel_xiaomi_msm8953/commits/lineage-16.0-thunder
Kernel config for "daisy"
https://github.com/eremitein/xiaomi_daisy_kernel_config_thunderstorm
NOTICE: This kernel just compiled by me with my config. All respect going to RevanthTolety, big thanks him for efforts! When he tests and releases his kernel for "daisy" device, this my thread will be closed by me, because it will not be necessary. Now users have the opportunity to evaluate this kernel and share their wishes and comments on this thread. I hope it will be the benefit of all
Kernel Special Features:
Version Information
Status v2: Stable
Release Date: 2019-02-19 (UTC +5)
Created: 2019-02-19
Last Updated: 2019-03-02
.
//reserved
Screenshots from settings
Nice you got zzmove good work!
let's tes this one! i haven't good experience on GENOME CAF not very stable ... yet
Thread opened.
Lupin The Third
Enjoy!
Lupin The Third
Bokoko006 said:
Nice you got zzmove good work!
Click to expand...
Click to collapse
say thanks to RevanthTolety
i'm just modify config for daisy and compiled the kernel
Lupin The Third said:
Thread opened.
Lupin The Third
Click to expand...
Click to collapse
Why is thread closed?
Bokoko006 said:
Why is thread closed?
Click to expand...
Click to collapse
Maintenance. But, it's opened now. So...
No sound in call 10.0.3.0 pie
Unpacking ramdisk failed. Aborting
TheDoop said:
Unpacking ramdisk failed. Aborting
Click to expand...
Click to collapse
I had this once, when I installed a custom kernel over a custom kernel both with anykernel installer. Try to flash stock first via fastboot!
istall method updated in OP
Voodoojonny said:
I had this once, when I installed a custom kernel over a custom kernel both with anykernel installer. Try to flash stock first via fastboot!
Click to expand...
Click to collapse
Thanks. now installing
Overunity01 said:
No sound in call 10.0.3.0 pie
Click to expand...
Click to collapse
+1
Can any one provide antutu score
Medo22 said:
Can any one provide antutu score
Click to expand...
Click to collapse
not very good
Overunity01 said:
No sound in call 10.0.3.0 pie
Click to expand...
Click to collapse
Voodoojonny said:
+1
Click to expand...
Click to collapse
it's a strange, for me all work
may you send me logs?
eremitein said:
it's a strange, for me all work
may you send me logs?
Click to expand...
Click to collapse
I will do later - perhaps this evening. Since I needed my phone I directly went back to stock...