Related
This ROM is based on Cotulla's original NAND release with a few changes, the main one being that this is the first ROM that can be flashed using ClockworkMod Recovery.
How to flash;
1: Boot into Clockwork Recovery
2: Select flash zip from sdcard
3: Select ROM file and then confirm
4: Wait for All Done! message
5: A wipe is recommended but not always required, if you experience force closes or things not working, try wiping before posting problems.
Changelog;
-v1.0- Initial Release
-gauner1986 Kernel from Desire HD rom release
-RMNet by default, create ppp folder in system to enable PPP data
-SU Fully working
-Flashable ONLY with clockworkmod recovery found HERE
-DOWNLOAD-
*CACHE FIX IS REQUIRED TO INSTALL APPS*
-Cache Fix-
THIS ROM IS ONLY FLASHABLE USING CLOCKWORKMOD RECOVERY FOR HD2 FOUND HERE
Credits to;
Cotulla + DFT - For the base ROM and all the great work thats gone into NAND on the HD2
Gauner1986 - For the kernel used in this ROM
CyanogenMod Team - For the great recovery that allows flashing custom roms
Anyone else who has contributed to android on the HD2
RaiderX303 said:
This ROM is based on Cotulla's original NAND release with a few changes, the main one being that this is the first ROM that can be flashed using ClockworkMod Recovery.
How to flash;
1: Boot into Clockwork Recovery
2: Select flash zip from sdcard
3: Select ROM file and then confirm
4: Wait for All Done! message
5: A wipe is recommended but not always required, if you experience force closes or things not working, try wiping before posting problems.
Changelog;
-v1.0- Initial Release
-gauner1986 Kernel from Desire HD rom release
-RMNet by default, create ppp folder in system to enable PPP data
-SU Fully working
-Flashable ONLY with clockworkmod recovery found HERE
-DOWNLOAD-
-
*CACHE FIX IS REQUIRED TO INSTALL APPS*
Cache Fix-
THIS ROM IS ONLY FLASHABLE USING CLOCKWORKMOD RECOVERY FOR HD2 FOUND HERE
Credits to;
Cotulla + DFT - For the base ROM and all the great work thats gone into NAND on the HD2
Gauner1986 - For the kernel used in this ROM
CyanogenMod Team - For the great recovery that allows flashing custom roms
Anyone else who has contributed to android on the HD2
Click to expand...
Click to collapse
Very nice, thanks for the update.zip.
Thank you
SOOOOOOOOOOOOOOOO much!
As
for the cache fix. Do I flash directly after the ROM?
jhr5474 said:
for the cache fix. Do I flash directly after the ROM?
Click to expand...
Click to collapse
yes, just flash the rom then the cache fix
work very well
RaiderX303 said:
This ROM is based on Cotulla's original NAND release with a few changes, the main one being that this is the first ROM that can be flashed using ClockworkMod Recovery.
How to flash;
1: Boot into Clockwork Recovery
2: Select flash zip from sdcard
3: Select ROM file and then confirm
4: Wait for All Done! message
5: A wipe is recommended but not always required, if you experience force closes or things not working, try wiping before posting problems.
Changelog;
-v1.0- Initial Release
-gauner1986 Kernel from Desire HD rom release
-RMNet by default, create ppp folder in system to enable PPP data
-SU Fully working
-Flashable ONLY with clockworkmod recovery found HERE
-DOWNLOAD-
*CACHE FIX IS REQUIRED TO INSTALL APPS*
-Cache Fix-
THIS ROM IS ONLY FLASHABLE USING CLOCKWORKMOD RECOVERY FOR HD2 FOUND HERE
Credits to;
Cotulla + DFT - For the base ROM and all the great work thats gone into NAND on the HD2
Gauner1986 - For the kernel used in this ROM
CyanogenMod Team - For the great recovery that allows flashing custom roms
Anyone else who has contributed to android on the HD2
Click to expand...
Click to collapse
Too F'ing fast RAIDER! Thanx.
how do I convert it to ppp?
I used the search optiion, believe me. All I found was ppp to rmnet because of the early on data disconnects. Could you guys help? Thanks in advance.
elcanela said:
I used the search optiion, believe me. All I found was ppp to rmnet because of the early on data disconnects. Could you guys help? Thanks in advance.
Click to expand...
Click to collapse
the first damn post said:
-RMNet by default, create ppp folder in system to enable PPP data
Click to expand...
Click to collapse
In a terminal emulator or adb shell.
Code:
su
mkdir /system/ppp
elcanela said:
I used the search optiion, believe me. All I found was ppp to rmnet because of the early on data disconnects. Could you guys help? Thanks in advance.
Click to expand...
Click to collapse
youll need to use adb and
adb remount
adb shell mkdir /system/ppp
Click to expand...
Click to collapse
or in terminal emulator
su
mount -o rw,remount /system /system
mkdir /system/ppp
Click to expand...
Click to collapse
the initrd and the zimage on the sd card is needed for CW or its a zimage files for your zip rom?
its question becouse you write its gauner kernel from HDrom, and he have in gauner hd rom 0.3 kernel with OC to 1113mh... can i replace the zimage from the sd card with this one and its allready replace in system?
ilijan said:
the initrd and the zimage on the sd card is needed for CW or its a zimage files for your zip rom?
its question becouse you write its gauner kernel from HDrom, and he have in gauner hd rom 0.3 kernel with OC to 1113mh... can i replace the zimage from the sd card with this one and its allready replace in system?
Click to expand...
Click to collapse
the zImage on the SD is for CWM recovery, not the ROM, the zImage for the rom is in the boot partition on the NAND
shadiku said:
In a terminal emulator or adb shell.
Code:
su
mkdir /system/ppp
Click to expand...
Click to collapse
Damn, I feel like an A$$! Didnt think it was that literal, I thought you had to drop certain files in there, but I will just make one with SUFBS. Thanks.
ok so if i want to replace zimage i need to go with install.bat wia adb? or its possible with cw?
Well even though I hate Sense.. I have to flash something with Clockwork. Here we go.
ilijan said:
ok so if i want to replace zimage i need to go with install.bat wia adb? or its possible with cw?
Click to expand...
Click to collapse
I think we can change in zip file : boot --->zImage and /system/lib/modules ----> ..
wait for RaiderX303 confirm this method again.
ilijan said:
ok so if i want to replace zimage i need to go with install.bat wia adb? or its possible with cw?
Click to expand...
Click to collapse
boot into CWM, then using adb run these commands
adb shell mount /dev/block/mtdblock2 /boot
adb push zImage /boot/zImage
adb reboot
Click to expand...
Click to collapse
or just change the zImage in the cache fix zip file and reflash
canot install mdj 9.2 oc rom becouse its canot mount boot block mtdblock0
thanks so much! its work just edited install_ kernel.bat and its allready replace the zimage
@raiderx
hmmm is it possible to use your .zip and swap the system folder with a cm6 system folder+nand kernels and flash from there?
in theory its possible but asking first before my phone becomes a ticking timebomb
does it need to be signed?
Notes:
Click to expand...
Click to collapse
This build is a rework/continuation of MDJ Froyo Sense Revolution series
If m-deejay decides to update his original build, I will discontinue this build
Use this at your own risk. I will not be accountable if this causes you phone to fail, or you lose your data. The backup of your data is your responsibility.
I am a newbie to the android development, so please be patient with fixes and releases; and your help and advice will be appreciated.
Finally: Please, Click Thanks if you appreciate the build, and all works.
Kernel Usage
Click to expand...
Click to collapse
The kernel used in this ROM is based on MDJ S9.2, and have ported it, and have patched to the latest upstream with a lot of fixes Just to confirm, this kernel was originally S9.2 from MDJ, so up until then all credit is to him
The git is available here, check logs and diffs for the changes made. There is a neat build script to get it compiled for yourself if you want as well in Linux or cygwin. I am using the test branch at the moment.
ROM Links
Click to expand...
Click to collapse
I have tested an upgrade myself to these releases myself, and have not encountered any problems. But everyones setup is different, the upgrade process may work for you. But would recommend to do a NAND backup before you do. FINALLY, I will not be held responsible if you lose any data.
DFT releases will not be provided, so DON'T ask
The build of this ROM is available here, If anyone wants to have play with this build, then feel free to checkout the repository by running the following command in Linux. This will grab the whole repository onto your machine.
Code:
git clone http://github.com/arif-ali/android_leo_fsr.git
Froyo Sense Revolution 2.5.1 NAND CWM MAGLDR, Click or scan the image
Froyo Sense Revolution 2.5.1 NAND CWM cLK, Click or scan the image
Forum Links
Click to expand...
Click to collapse
ClockworkMod HowTo
cLK howto
config.txt Howto
Click to expand...
Click to collapse
ppp_mode - set PPP or not, valid values 1 or 0 (not for cLK)
gps_zone - zone from pool.ntp.org, values may be uk, us, europe etc... check pool.ntp.org, for all possible values
example config
Code:
ppp_mode=1
gps_zone=uk
cLK Howto
Click to expand...
Click to collapse
Download the attached cLK1.3.3_system_250M_arif-ali.zip, or cLK1.3.3_system_210M_arif-ali.zip
turn phone on with volume down key, so that it is in SPL
install cLK by double-clicking CustomRUU.exe
To install recovery download the correct one from post #2 of cLK thread (link below)
reboot phone into fastboot by keeping the back key pressed
flash recovery by running "fastboot flash recovery recovery.img"
How To (CWM - MAGLDR)
Click to expand...
Click to collapse
Make sure you have partitioned the SD card correctly (ext partition, and a vfat partition)
Make sure you have followed the ClockWorkMod Howto to add the recovery to the phone (see links in the thanks/credits section)
Download the link above and put it into the vfat partition, maybe in a folder called ROMS
Boot phone into MAGLDR by holding on the Red button/close call
Select AD Recovery (Option 8)
Select Install zip from sdcard
Select choose zip from sdcard
Select the ROM from the SD
Select Yes to install the zip
reboot the phone and enjoy
How To (CWM - cLK)
Click to expand...
Click to collapse
Make sure you have partitioned the SD card correctly (ext partition, and a vfat partition)
Download the link above and put it into the vfat partition, maybe in a folder called ROMS
Boot phone into fastboot by pressing the back key
flash the recovery using "fastboot flash recovery recovery.img"
reboot phone into cLK recovery by holding on the Home key
Select Install zip from sdcard
Select choose zip from sdcard
Select the ROM from the SD
Select Yes to install the zip
reboot the phone and enjoy
Howto ROM Manager
Click to expand...
Click to collapse
After booting into the phone, you need to create the following file on your sdcard, and reboot the phone. Hopefully after this, your phone should work.
Code:
/sdcard/clockworkmod/.settings
with the following contents
Code:
{"is_clockworkmod":true,"current_recovery_version":"3.0.1.9","readonly_recovery":false,"recovery_timestamp":1300214577721,"flash_recovery":"flash_image recovery %s ; ","reboot_recovery":"","detected_device":"leo"}
I will attempt to get this added in the next release
Please READ!!!
Click to expand...
Click to collapse
make sure that any app that you do install move it back to the phone, and that will automatically reside on the SD card in the ext2/ext3/ext4 partition
For the this ROM 210 MB in /system, So you need the Recovery_250M from the RaiderX303's thread
To Do List / Work in-progress
Click to expand...
Click to collapse
v2.6
Fix AudioFlinger Issue
Fix volume issues
Add Stock Theme Option
Thanks/Credits
Click to expand...
Click to collapse
m-deejay (ROM & kernel)
Cotulla (MAGLDR, HSPL)
kholk (Radio)
RaiderX303 (ClockworkMod)
birkoffsjunk (img2cwm)
tkirton (dtapps2sd)
cedesmith (cLK)
letama (ril_wrapper)
#htc-linux and #htc-linux-chat
All ROM users
Screenshots
Screenshots
Changelog
v2.5.1(25/03/2010)
new kernel AA 0.5 (see kernel changelog for details)
support for ROM Manager if using cLK
Add latest ROM Manager to cLK build
update to cLK 1.3.3
cache moved to mtd cache
Add ES File Explorer
Update gmail, youtube apks
v2.5(13/03/11)
added cLK support
moved AA 0.3 kernel
added PPP support
added config.txt support
fixed APN issue in framework
Initial Release (by me)
Downloading & try soon
chairman_palm said:
Downloading & try soon
Click to expand...
Click to collapse
Any feedback?
Update to 2.5.1
Updated, highlights below,
* new kernel AA 0.5 (see kernel changelog for details)
* support for ROM Manager if using cLK
* Add latest ROM Manager to cLK build
* update to cLK 1.3.3
* cache moved to mtd cache
* Add ES File Explorer
* Update gmail, youtube apks
enjoy
Ok I am jumping on board and will give this ROM a try will give feedback in a few hrs after ROM has settled in
Update: ROM loaded and runs really smooth, picture messages are blurry - only allows a max 300k message size
added English (US) through MoreLocale2 app
I know this is a work in progress so keep up the great work arif
Update 27Mar11 -
have been using this ROM just over 24hrs and so
fare not to bad
Battery drain is a little higher than what I am used to
Have to remember to us speaker phone when I make first
call after reboot due to Robot voice and subsequent freezing of my phone if I fail to do so.
Also have periodic data connection failure of which I do not
experience on my other HD2 with a diff. ROM.....This was just FYI and not meant to degrade your hard work Arif
stock theme
Here is an initial attempt at doing the Stock theme
http://www.multiupload.com/LL8NO4MB13
feedback would be great
Why sdext doesn't work? I have properly partitioned card which works with other roms, but here my phone states that I have 3mb free space after install. I even re partitioned card without success.
maxld said:
Why sdext doesn't work? I have properly partitioned card which works with other roms, but here my phone states that I have 3mb free space after install. I even re partitioned card without success.
Click to expand...
Click to collapse
Have you used the required config.txt?
Sent from my HTC HD2 using XDA Premium App
Honestly I tried to find it but I'm so blind that I did it without it. Thanks for the help mate.
Edit:
I searched again and still can't find it. Could you upload me one?
maxld said:
Honestly I tried to find it but I'm so blind that I did it without it. Thanks for the help mate.
Edit:
I searched again and still can't find it. Could you upload me one?
Click to expand...
Click to collapse
Look at the first post it tells you how to create one. Its simple open note pad on your computer put in the right details and save it as config.
Sent from my HTC HD2 using XDA Premium App
Yeah, i have read it, but there are only ppp and gps options listed.
maxld said:
Yeah, i have read it, but there are only ppp and gps options listed.
Click to expand...
Click to collapse
Okay try this in create the config.txt like I said and in it put a2sd_mode=data
Sent from my HTC HD2 using XDA Premium App
Thank you kindly for your help, sir. Unfortunately it didn't help, maybe OP will have a trick how to activate sd ext partition.
maxld said:
Thank you kindly for your help, sir. Unfortunately it didn't help, maybe OP will have a trick how to activate sd ext partition.
Click to expand...
Click to collapse
* create a file called config.txt
* add the following contents to the file
a2sd_mode=data
* run "adb push config.txt /sdcard/."
* reboot your phone.
If this doesn't work, then run the following commands
adb shell ls -l /dev
adb shell mount
adb shell df
and let me know the results
Thanks, I'll report results in a moment.
Edit 1: It will be a longer one, because my connection is ridiculously slow and I have to download sdk and jdk
Edit 2: None of your advices helped, still have 3.85 MB of free space.
Anyone have the new version?
giorgib said:
Anyone have the new version?
Click to expand...
Click to collapse
What do you mean writing "the new version"?
There isn't a new version yet, and haven't planned one as yet. But I have some ideas that I wanted to try to fix some of the issues that this ROM has
Most of my time has been spent on doing the CM nightlies and the CWR updates, and getting RM support for the leo. But I will see when I can get time out to do an update here as well.
Welcome
I wrote this post to help people get their Archos g9 tablet running custom roms. If you have any improvement ideas, please post them so I can make this better source of information.
List of content:
Post 1
What is recovery
What is SDE and how to install it
-Also SDE for 4.0.25
List of most commonly used roms
How to install custom roms
How to install offical rom
How to multiboot android 4.0 based roms
Installing 3G stick and Huawei modems support.
Post 2
Change symlinks/binds.
Installing ADB
Installing SuperCharger
Installing Chainfire3D
But why?
FAQ
Useful links
What is recoveryYou can boot to recovery menu by holding volume- while booting your device. From recovery meny you can calibrate your touchscreen, wipe data and do this kind of stuff. Installing SDE creates new entry to recovery menu, called Special Developers Edition. There you can remove android kernel, flash new, export hdd and data. In recovery move up and down with volume + and -. Select by pressing power button
What is SDE and how to install itSDE is shortened word from Special Developers Edition. After SDE is installed, your tablet is able to boot to official rom, recovery, and SDE rom. Most of the roms advice you to use "Remove android kernel" from SDE before you install kernel. When you remove your android kernel from there and install kernel from custom rom, your archos boots directly to custom rom. If you don't delete it, your device boots to official, but keeping volume - while booting gives you change to boot to SDE.
There are 3 guides how to install SDE. Official SDE watermarks your device for archos (there is no watermark on screen ), so they can detect you have installed SDE in some point. It stays even if you remove SDE. Official way is more safe. Also, it removes "only" software warranty. If your devices powerbutton, Usb-port or etc brokes, you can still send it to warranty. Link to official SDE install guide. Big thanks for Shano56.
Then there is unofficial, a bit more dangerous method. It doesn't watermark your device, but is more complicated. Guide tells that it's outdated, but it worked for me. I used official 4.0.4 version while installing. Link to the guide. Big thanks to Shano56.
4.0.25 Guide, by surdu_petru
surdu_petru said:
Hi !
I uninstalled SDE by mistake yesterday !
...so, you can enable (install) unofficially SDE following this path ( work 100% on firmware 4.0.25 ) :
On your tablet :
check on Settings-> Developer options -> USB debugging on !
connect USB cable ( PC to tablet )
On your PC :
> adb push 1 /data/local
> adb push 2 /data/local
> adb shell
$ chmod 0755 /data/local/*
$ ./data/local/1
$ exit
> adb reboot
> adb shell
$ ./data/local/2
$ exit
> adb reboot
> adb push zimage /data/local/tmp
> adb push initrd.cpio.lzma /data/local/tmp
> adb push abcbox /data/local/tmp
> adb shell chmod 755 /data/local/tmp/abcbox
> adb shell /data/local/tmp/abcbox kd_flasher -k /data/local/tmp/zimage -i /data/local/tmp/initrd.cpio.lzma
( now you have installed unofficially SDE ! )
Flash Root version or other Custom Rom :
> adb reboot
> adb shell rm /data/local.prop
> adb push archos.ext4(.update) /mnt/storage
Go to SDE -> ( check "Reboot" on power off menu , and after a while press & keep volume down until you see SDE menu !)
Go to Recovery System -> Developer Edition Menu -> Remove Android Kernel -> I Undestand -> OK -> Developer Edition Menu -> Flash Kernel & Initramfs -> copy here zImage and initramfs.cpio.lzo appropriate archos.ext4(.update) -> OK -> wait to boot !
Now you have Rot version installed !
Here you will find the necessary files : Enable_SDE.zip
Click to expand...
Click to collapse
List of most commonly used romsThese roms are most commonly used. Most of them are still being developed. I also included link to rooted official honeycomb, because some people have better touchscreen responsibility with it.
ParanoidAndroid 3
Cyanogenmod 10, 4.2 mockup
Cyanogenmod 10
AOKP ROM
[email protected]
Clean_Slim&Fast(Based on official 4.0.25!)
Ubuntu. This requires special kernel, which is compatible with official android 4.0.4Overclockable stock rom
Early CM9
Stock ICS rom with root & busybox
Stock honeycomb with root. (FYI, kernel requires renaming while installing)
How to install custom romsCustom roms have different installing methods, but basic idea is same. You move image file with specified name to specified location.
When coming from stock rom or whengoing to stock rom:
CyanogenMod 10, AOKP, CyanogenMod 9
surdu_petru said:
Installation : Now should be work on all devices Gen9 !!!
...connect USB cable to PC and ( you need to use a Rom with root access ) :
> adb shell
# stop
# rm -rf data/*
# mkdir data/local
# mkdir data/media
# exit
> adb push archos.ext4 /mnt/storage ( need to wait about ~150 seconds ) !
> at the same time do : adb reboot & press and keep volume down ; in SDE -> DEM-> Remove Android Kernel ( if exist ) -> Flash Kernel & Initramfs -> copy here zImage & initramfs.cpio.gz -> OK -> wait to reboot !
Click to expand...
Click to collapse
[email protected], Ubuntu, Root 4.0.7 Clean_Slim&Fast
surdu_petru said:
Install :
- copy archos.ext4.update(archos.ext4 in case of Clean_Slim&Fast) in /mnt/storage/ , you can use this command > adb push archos.ext4.update(remove .update if Clean_Slim&Fast) /mnt/storage/
- go to SDE -> Developer Edition Menu -> ( Remove Android Kernel if available ) -> Flash Kernel & Initramfs -> copy here zImage & initramfs.cpio.lzo -> OK! -> wait to reboot .....
- after everything was installed - please reboot your device !
Click to expand...
Click to collapse
Honeycomb
Install like Cyanogenmod and AOKP and others, but rename initramfs.cpio.gz to initramfs.cpio.lzo
How to install official romDownload official 4.0.7 rom from here.
Now boot to recovery (hold volume- while booting) and choose update firmware.
Now there should be noew drive in your pc. Drop the downloaded firmware_archos_it4.aos to there and press ok in recovery. Keep usb plugged in while installing. It should take around 30 seconds to 2 minutes. Now choose ok again. your tablet should now reboot to stock rom.
4.0.24 Official is owrking on some devices, but because it won't work on all, i won't cover it here(yet)
How to multiboot android 4.0 based romsInstall modified initfram from this topic. Use the zimage from the rom you want to multiboot. AFAIK you can multiboot with following combos:
[email protected], Ubuntu (download newer kernel from later pages.), Root 4.0.7
and
AOKP, CyanogenMod 9.
You cant use [email protected] and AOKP because they do not use same kind of data. That means that after you have run first rom, the second will bootloop. That is also why it requires wiping data when changing from stock to aokp and vise versa.
Detailed:
Download dmenu-0.3a.zip, and extract initframfs to desktop. Then download [email protected] and stock 4.0.7 rooted. Extract Image files and zimage from either one of the roms. Now just instal like described in earlier section, while using initframfs from multiboot and kernel from other rom.
Installing 3G stick and Huawei modems support.
Trevd made a package to add 3G stick and extra Huawei modems work for AOKP and generally all ICS ROMs. This guy is awesome because he also made some Huawei modems work.
trevd said:
Hi surdu_petru and AOKP fans.
Great work as always, It's not a rom i'll ever use but It's the first time I've loaded an AOKP Rom, I like notification layout, I'll be having that away for my own personal rom Anyway I was more just passing through and noticed 3G was not working yet. As seen as though that seems to be my speciality and preoccupation/addiction for the last 9 months I thought I do something to remedy that situation for you.
Here's an hotfile link to download the update [ 3g-archos-aopk.7z ] this should contain everything you need to get the Archos 3G Dongle, just for ****s and giggles as a extra bonus i've also included the huawei support file as well :good:
Installation:
From a command prompt / bash terminal
Code:
7z x 3g-archos-aopk.7z
adb push 3g /
adb shell reboot_into sde
extracting the 3g-archos-aopk.7z will give youu a 3g directory in you current directory, we then push the contents of the 3g directory to the root direcotry on the device. This operation is recursive.
Have Fun!
What follows is a detailed explanation of what files and modifications are required to add 3G support.
Archos 3G Stick
The changes / additions to add this functionality breaks down like this ; The following required binary's were on the device already:
** /lib/modules/hso.ko is insmod'd by the device specific init file /etc/init/init..rc
Code:
/lib/modules/hso.ko[B]**[/B]
/usr/bin/usb_modeswitch
/system/lib/libtcl-ril.so
/system/bin/rild
/system/bin/pppd
/system/xbin/chat
/etc/ppp/init_pppd_datakey
/etc/ppp/ip-up-datakey
/etc/ppp/ip-down-datakey
/etc/ppp/peers/datakey
/etc/chatscripts/datakey_start
/etc/chatscripts/datakey_stop
/etc/usb_modeswitch/1bbb_f000
The following required services were already defined in the device specific init.rc's located in /etc/init/init..rc ,
*** switch_ms_3g defined by /etc/init/init.archos.rc
Code:
service service switch_ms_to_3g[B]***[/B]
service pppd_secrets
service pppd_datakey
service ril-daemon
So what's missing? you may ask as this pretty much is everything that is needed by the Archos 3G Stick.
Standard Archos Roms use the UsbKeyManager.apk system service to start the switch_ms_to_3g and ril-daemon service's. I replace that with my own ueventd handling native service and add an additional to configuration file keep everything clean
Code:
/system/bin/hotplugd
/init.dongle.rc
I've added the following line to the top of the /init.rc
Code:
import init.dongle.rc
All that is left to do now is enable mobile networks on the rom. I used apktool to decompile the /system/framework/framework-res.apk and change the following values
res/values/bools.xml
Code:
true
true
res/values/arrays.xml
Code:
wifi,1,1,1,-1,true
mobile,0,0,0,-1,true
mobile_mms,2,0,2,60000,true
mobile_supl,3,0,2,60000,true
mobile_hipri,5,0,3,60000,true
mobile_fota,10,0,2,60000,true
mobile_ims,11,0,2,60000,true
mobile_cbs,12,0,2,60000,true
wifi_p2p,13,1,0,-1,true
"1,1"
"0,1"
"7,1"
"9,1"
res/values/strings.xml
Code:
ppp1
Huawei Support
The extend this functionality further I added the following files
Code:
/etc/ppp/init_pppd_gprs
/etc/ppp/ip-up-gprs
/etc/ppp/ip-down-gprs
/etc/ppp/peers/gprs
/etc/chatscripts/gprs_start
/etc/chatscripts/gprs_stop
/etc/usb_modeswitch/ [ numerous configurations files ]
/lib/modules/usb_wwan.ko
/lib/modules/option.ko
/system/lib/libhuaweigeneric-ril.so
We also need to chmod 6755 /system/bin/pppd but that is handled/checked in the /init.dongle.rc so there is no need to do that manually
Click to expand...
Click to collapse
Change symlinks/bindsTrevd wrote guide to let people know how to change binds. That way you can move large folders, like Gameloft games and navigator files to ExternalSD, saving InternalSD space.
trevd said:
If you after freeing up space, it is still possible with a bit of hacking voodoo . There are 2 ways I know of in fact.
METHOD 1 - SDCARD SERVICE
you can point the /storage ( /mnt/storage in reality ) to any directory you like. I've currently got mine pointing to an multi partitioned external 32gb sdcard. :0 all you need to do is change the sdcard service in the /etc/init/init.A101S.rc,
Currently it mounts /data/media to /mnt/storage, if you have an external sdcard card handy, try this as a quick and dirty test
From a terminal emulator or adb shell run the following commands
Code:
stop sdcard ;
sdcard /mnt/sdcard 1000 1015 &
ls /storage
You will now see that the external sdcard can be access through /storage. to kill the test run
Code:
pkill -9 sdcard
start sdcard
Everything should be back to normal. As I mentioned to make a more permanent change edit the following line in the /etc/init/init.A101S.rc
Code:
service sdcard /system/bin/sdcard /data/media 1000 1015
METHOD 2 - MOUNT BIND
The other, perhaps more straight forward method uses the bind argument on the mount to command to "mount an already visible filesystem elsewhere" .
In the example I'll bind the external sdcard to a directory in the internal storage
use the terminal emulator or adb once again to execute the following commands
Code:
mkdir /storage/sdcard
mount --bind /mnt/sdcard /storage/sdcard
To make this more parmanent, I would probably create a wrapper shell script for the sdcard service to make sure it all gets started together, that's just my preference, As we say in trade ( or maybe it's a saying i've just made up :silly: ) ; "there's more than one way to mount a file system!"
In Summary: I would go with method 2 as this effectively achieves the desired effect off "symlinking" an external directory in the /storage
Cheers
Click to expand...
Click to collapse
Installing ADBADB comes from word android development bridge, and it allows you to debug, move files and get shell access to your tablet.
Archos said:
First make sure you are running the latest ARCHOS firmware. Connecting by this method will give you user shell privileges. Learn more to know how to use ADB on Windows, Mac or Linux operating system:
Go to the Android SDK page and download the latest SDK for your operating system.
For Windows users only: Install the Archos ADB USB Driver for Windows. The driver is available at the ARCHOS support ftp (ftp://support.archos.com). Instructions how to install the driver are available at USB Driver for Windows site on Android Developers.
Add Archos vendor ID (0x0e79) to adb_usb.ini in .android folder in your home directory:
Windows: echo 0x0e79 >> "%USERPROFILE%\.android\adb_usb.ini"
Macos: echo "0x0e79" >> ~/.android/adb_usb.ini
Linux: echo "0x0e79" >> ~/.android/adb_usb.ini
For Linux users only: You need to add a udev rule if ADB only works as root:
Create a file /etc/udev/rules.d/51-android.rules that contains the following lines:
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device",
ENV{PRODUCT}=="e79/*", MODE="0666"
SUBSYSTEM=="usb", SYSFS{idVendor}=="e79", MODE="0666"
Make the rule known to udev with the following command:
udevadm control --reload-rules (or udevcontrol reload_rules on older systems)
Click to expand...
Click to collapse
Running adb from anywhere
steviewevie said:
We need to update your Path variable. This lets you run adb on your PC from a command window no matter which directory you are in (which makes things a lot easier). If you don't setup your Path, then every time you want to run adb, you will either have to type the whole long pathname where you put adb, or cd to where you've put adb and run it from there (which could be inconvenient if you are transferring files to/from your phone).
On your PC, right-click on "My Computer" and select "Properties". (on Vista, click on "Change Settings"). Go to the "Advanced" tab, then select "Environment Variables". Find the "Path" variable in the list of variables that it shows (you might need to scroll), and then double-click on that entry to edit it. Add the full path of the "tools" and "platform-tools" folders of the SDK to your path. e.g. if the SDK has been installed in "c:\Program Files\android-sdk-windows", then add to your Path "c:\Program Files\android-sdk-windows\tools;c:\Program Files\android-sdk-windows\platform-tools" (Please Note - don't put any spaces between the semi-colon and pathname, otherwise it won't work !)
Click to expand...
Click to collapse
sources:Archos, steviewevie
Installing SuperchargerSupercharger is a multiscript which makes the tablet work much better. Its created by Zeppelinrox, and its official topic is here. We are using also script manager in this guide. That way we can make MinFrees and OOM apply.
In this guide we'll use Apex launcher which is moved to /system/app for our default launcher.
We are also using adb to configure and run Supercharger.
Because stock launcher is odexed and i am not writing how to deodex, we are not using it.
First make sure apex is your default launcher. This can be tested by pressing home button in homescreen.
If it show mini previews of your homescreens, apex is your default launcher.
Now lets begin:
go to here and download newest file. At
the time of writing, it is Update 9_RC11_test6. Move it to your adb folder.
Then open commandline. This can be opened with windowskey + R and writing cmd. Navigate
to adb folder using cd command. I have made adb to run from anywhere, so i just navigate to the downloaded file.
Now use command "adb push v6* /mnt/sdcard" then use command "adb shell". Now you should have
shell access to your tablet. Now do following
su
cd /mnt/sdcard
sh V6* /remember capital V)
Supercharger script should open now. After presentation, script should print after telling your busybox version
"com.anddoes.launcher is the home launcher!" Now continue install. Supercharger will tell you everything you need to know.
So just follow the instructions. After choosing kernel tweak, you get bunch of permission denieds.
We can't help them, so lets just continue.I recommend on using all the tweaks that you can,
but it is your choise do you want to use or not. After all the selections are selected and your in
driver panel, choose number 32. It'll reboot your tablet and wipe dalvik. When the tablet has booted, lets run supercharger script again.
So write these again:
su
cd /mnt/sdcard
sh V6_Super*
After getting to drivers panel, you notice that minfrees are not in effect, and neither is OOM Grouping Fix BUT if they are, you can ignore this step..
Install script manager from market and open it. Give it root permissions and navigate to /system/etc/init.d
press SS99SuperCharger to open its settings. Now press the Su button and then Boot button.
Now press save, and then click it's name which appers to right. Then press back button and reboot.
Now Minfrees should work, and OOM too.
Now you can run 22 if you want to try it. Supercharger is now fully working.
Installing Chainfire3D
Chainfire said:
Chainfire3D is an intermediary OpenGL driver. What does that mean? It means that Chainfire3D sits between your apps and the graphics drivers, and can intercept and/or change commands between the two. It has some built-in functions, and can be further extended with plugins to provide extra functionality.
Click to expand...
Click to collapse
It is very useful for running gameloft games and other games too. I recommend buying it. There are some plugin for it, but i'm not going to tell you about it now.Play store link.
After downloading it, open it and choose "Chainfire3D Driver" and from there "install". Then confirm it and tablet should reboot. Now reopen it and choose "Default opengl setting". From there you can tweak 3D performance if some games lag. Also, if you install plugin, there you can apply them. I personally use "reduce texture quality".
But why?
This section is to point few reason why to follow these guides. Lets begin:
SDE
Well, you should install this if you want to customize your tablet. If your happy with your tablet running stock, you don't need this, or any other guides.
Custom roms/kernels
Custom roms allow you to use root, they make your tablet faster and add extra functionality. This "functionality" includes: Overclock, run init.d scripts, enable both cores with all governors, root and themes. The benefits are not limited to these, but I could name this quickly. If you wan't to try something which is close to stock, but still has root and some custom functionalities, i would recommend deodexed 4.0.7, or [email protected]
Install official roms
These roms do not require SDE, but will not include root or anything fun . Updating your official rom has many benefits. They include fixes and boost your tablets performance.
Multiboot
Multibooting allows you to have 2 or more roms, which you can choose which to boot on startup. I would recommend this if you want to test functions with root, but still have "backup plan" if testing rom renders unbootable.
3G support
Basicly this allowes some extra huawei 3G sticks to work. There is no list of working stick, you just have to try and hope.
Change symlinks/binds
These allow you to "move" eg. gameloft games to external sd, and allow you to acces your externalsd via internalsd folder.. That way your gamedata does not eat the valuable internalsd space.
ADB
You need this to transfer rom to your tablet. It is also required when you sent logcat reports to help remove bugs.
SuperCharger
This makes your tablet work more fluid. I personally install supercharger to all my android devices. It removes need for task killer, and makes the device work better. Everyone has different results, and it costs only time to install, so i would recommend installing it.
Chainfire3D
This tool allows you to play games made for other GPUs and it can tweak application graphics. You can make the game look worse, but run better or adjust the grphics for a bit higher, so the game looks nicer.
FAQ[/CENTER]
These questions and answers are collected from various sources.
surdu_petru said:
How to activate second core for all govenors in surdu_petrus roms?
To activate the second core, you need the following steps :
- copy /system/S1tweak in /system/etc/init.d/ or ( > adb shell ; # cp /system/S1tweak /system/etc/init.d ; # exit )
- open No-frills CPU Control :
- choose the desired Governor ( but not hotplug ) !
- choose the desired frequency , but not overclocked ! ( when the device will boot - will open with the selected frequency , so please choose max. frequency = your max. stock frequency )
- check "Apply on boot"
- check "Applay"
- check allow if superuser asked permission
- reboot your device !
- Now , both core will be used in any selected Governor ( other than hotplug ! ).
Click to expand...
Click to collapse
What modems does Trevds mod support?
trevd said:
The theoretical list of supportted devices come from those devices supportted by usb_wwan and option kernelp drivers.
Click to expand...
Click to collapse
Shano56 said:
Can I just drag the .zip file to the RAMDISK that appears when I flash zImage and initramfs?
No! Archos recovery cannot read ZIP files. You must first EXTRACT, then copy the contents of the extracted folder. NOT the folder itself. This means you will have two files on the RAMDISK, and no additional folders. If you don't know what a RAMDISK is, try Google or Wikipedia. If you get stuck in a boot loop because you forgot to extract archos.update.ext4 or drive.zip, you must follow the instructions below.
Help! I am stuck in a bootloop! Archos splash screen appears and keeps rebooting. I messed up when I was rooting, and now android will not boot! I accidentally formatted my device, and now I cannot boot into android.
This is a simple mistake and in 99% of cases it is easy to fix. Follow these steps:
Step 1: Download official Archos G9 firmware for ALL G9 tablets (aos file) HERE
Step 2: Boot into recovery turning your device off and then holding volume down + power at the same time
Step 3: Choose "Update Firmware"
Step 4: Connect USB cable to computer and tablet
Step 5: A removable device should appear (RAMDISK), copy the file you just download straight to that drive
Step 6: Press the power button once the file is done copying. DO NOT UNPLUG your device until it has finished updating and has booted back into android.
If you did not format your tablet or delete any personal media, your files should be uneffected.
Will I lose SDE menu if I update my tablet with official AOS or OTA update
As of the latest update (4.0.6) no official update from Archos has removed SDE menu. You should be fine, and your SDE menu should remain untouched.
Click to expand...
Click to collapse
[/quote]
Useful linksSome link i consider useful are here:
G9 101 16GB 1.5GHz Teardown! (Lots of Images)
XBMC for android
Want faster GPS? Follow this guide
3th just i remember something to add. Comment and give me some feedback. It helps me to make this topic useful for beginners, and for those who seek info.
I meant to edit first post... well, this works as 4th reserved then.
Hi there!
You have been busy! Thanks for kind words, Just an heads up really, you might want to update your post as I deleted the usb-modem-binary-redist github repo yesterday as it was a bit too clever for it's own good and I think a bit of abuse/misuse of the concept branching! Just because you can, doesn't always mean you should LOL, with that in mind I'd probably advise against linking to my github repos as they don't stay static for very long. I generally leave the hotfile links up "forever" so link away with them.
The Information and files included in the new AOKP post about 3G Dongles should be good across all ICS roms. Finally allow me to throw out this mini guide I wrote a while back which explains an "app-free" method of freeing up space, I noticed there been a bit of discussion about it, Using an app just seem like overkill, but that's just me I suppose.
Anyway good work. :good:
trevd said:
Hi there!
You have been busy! Thanks for kind words, Just an heads up really, you might want to update your post as I deleted the usb-modem-binary-redist github repo yesterday as it was a bit too clever for it's own good and I think a bit of abuse/misuse of the concept branching! Just because you can, doesn't always mean you should LOL, with that in mind I'd probably advise against linking to my github repos as they don't stay static for very long. I generally leave the hotfile links up "forever" so link away with them.
The Information and files included in the new AOKP post about 3G Dongles should be good across all ICS roms. Finally allow me to throw out this mini guide I wrote a while back which explains an "app-free" method of freeing up space, I noticed there been a bit of discussion about it, Using an app just seem like overkill, but that's just me I suppose.
Anyway good work. :good:
Click to expand...
Click to collapse
Thanks for the feedback.
I removed the part which had github link, and modified the AOKP section to tell it works with all ICS ROMs.
I'll included your mini guide. I might even have some use for it myself...
Sent from my GT-I9100 using xda app-developers app
help me for multi boot ubuntu ics bleuv03
hello I want to know is it possible to bleuv03 ics and multi boot with ubuntu and it is possible that what zImage and iniframts I should use.
desoler for my english I'm french and I go through a translator thank you.
muti642 said:
hello I want to know is it possible to bleuv03 ics and multi boot with ubuntu and it is possible that what zImage and iniframts I should use.
desoler for my english I'm french and I go through a translator thank you.
Click to expand...
Click to collapse
Download zimage, initfram and Ubuntu image from
http://forum.xda-developers.com/showthread.php?p=26000199
There is a high chance that touchscreen will not work if you have 101 G9 model in Ubuntu. You can still use USB OTG devices like mouse normally.
Sent from my GT-I9100 using xda app-developers app
julle131 said:
Download zimage, initfram and Ubuntu image from
http://forum.xda-developers.com/showthread.php?p=26000199
There is a high chance that touchscreen will not work if you have 101 G9 model in Ubuntu. You can still use USB OTG devices like mouse normally.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
thank you for answered. j've already managed to install ubuntu and I had no problem touch by cons I Can not get a dual boot ubuntu and bleuv03 ics. I shall therefore understands the multi boot flash I then I put two images but in the memory of the tablet and then I flash the kernel you gave me quote above and I should be able to boot on 2 rom and bleuv03 ubuntu?
muti642 said:
thank you for answered. j've already managed to install ubuntu and I had no problem touch by cons I Can not get a dual boot ubuntu and bleuv03 ics. I shall therefore understands the multi boot flash I then I put two images but in the memory of the tablet and then I flash the kernel you gave me quote above and I should be able to boot on 2 rom and bleuv03 ubuntu?
Click to expand...
Click to collapse
Download the this kernel https://docs.google.com/file/d/0BxgjsI4pMALheHZoVUdIYnVTN28/edit
It can dualboot [email protected] v03. If the ubuntu does not boot after flashing it, download this ubuntu image:
https://docs.google.com/file/d/0BxgjsI4pMALhVl9kek9SSFpKb2M/edit
THX
julle131 said:
Download the this kernel https://docs.google.com/file/d/0BxgjsI4pMALheHZoVUdIYnVTN28/edit
It can dualboot [email protected] v03. If the ubuntu does not boot after flashing it, download this ubuntu image:
https://docs.google.com/file/d/0BxgjsI4pMALhVl9kek9SSFpKb2M/edit
Click to expand...
Click to collapse
Thank you thanks you it works well, I do not use the right kernel or the good image of ubuntu. ps: the touchscreen does not work but using the OTG is perfect.
thank you again julie :good:
sorry for ignorance but for root i need to have adb sdk for do this steps??
"- copy archos.ext4.update to /mnt/storage/ , you can use this command > adb push archos.ext4.update /mnt/storage/
- go to SDE -> Developer Edition Menu ->( Remove Android Kernel if available ) -> Flash Kernel & Initramfs -> copy here zImage & initramfs.cpio.lzo -> OK! -> wait to reboot .....
- the first boot may be longer ! "
If my archos is untoot how i use this comand? with adb sdk ?!
solrakk6 said:
sorry for ignorance but for root i need to have adb sdk for do this steps??
"- copy archos.ext4.update to /mnt/storage/ , you can use this command > adb push archos.ext4.update /mnt/storage/
- go to SDE -> Developer Edition Menu ->( Remove Android Kernel if available ) -> Flash Kernel & Initramfs -> copy here zImage & initramfs.cpio.lzo -> OK! -> wait to reboot .....
- the first boot may be longer ! "
If my archos is untoot how i use this comand? with adb sdk ?!
Click to expand...
Click to collapse
Yes, you must use adb. I assume your "untoot" means unrooted. You use cd command to navigate to your adb folder and from there to platform-tools. Also drop archos.ext4.update to there. Then use the adb command to move the file. Moving file to that location does not require root.
Sent from my GT-I9100 using xda app-developers app
Archos G9 101 HD
Hi Surdu,
I tried to update after SDE install and then accidentally dont know what happened have lost android on my tablet G9 101 HD. I cant see my hd on pc and is not booting but only can see the rom image which appears on boot without animation. How can I transfer the update archos.ext4 into Internal Storage without seeing the drive on PC win 7. I have made mistake in steps may be.
Please help.
hondacity said:
Hi Surdu,
I tried to update after SDE install and then accidentally dont know what happened have lost android on my tablet G9 101 HD. I cant see my hd on pc and is not booting but only can see the rom image which appears on boot without animation. How can I transfer the update archos.ext4 into Internal Storage without seeing the drive on PC win 7. I have made mistake in steps may be.
Please help.
Click to expand...
Click to collapse
Go to the recovery menu, choose update firmware. When it prompts you to connect tablet to pc, cobbect it, but to different usb port than last time. That should cause the pc to reinstall usb drivers for the tablet.
Sent from my GT-I9100 using xda app-developers app
Archos G9 101 HD
julle131 said:
Go to the recovery menu, choose update firmware. When it prompts you to connect tablet to pc, cobbect it, but to different usb port than last time. That should cause the pc to reinstall usb drivers for the tablet.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Thanks, for so fast reply Dear...
I did the same as you advised and a drive with name ending with "REC" with a capacity of 299 MB appeared. I tried to copy the Surdu's Deoedex update but it has more weight in MBS about 390. So it could not. I tried original Archos ROM with weight of 186 MB and it copied. Started update but returned with an error "Update failed: (221)".....
Please advise.
Note: I also tried in SDE menu to export data drive and got a drive 1.48 GB which I formated from win 7 and succeded in copying Stock and Surdu's ROMs one by one but always failed to get android and it always say failed update. Still get unanimated Archos logo on startup with no further bootup.
hondacity said:
Thanks, for so fast reply Dear...
I did the same as you advised and a drive with name ending with "REC" with a capacity of 299 MB appeared. I tried to copy the Surdu's Deoedex update but it has more weight in MBS about 390. So it could not. I tried original Archos ROM with weight of 186 MB and it copied. Started update but returned with an error "Update failed: (221)".....
Please advise.
Note: I also tried in SDE menu to export data drive and got a drive 1.48 GB which I formated from win 7 and succeded in copying Stock and Surdu's ROMs one by one but always failed to get android and it always say failed update. Still get unanimated Archos logo on startup with no further bootup.
Click to expand...
Click to collapse
Okay... So you have sde installed? Good. First, let's get the official firmware working. Download the latest official ROM from archos:
http://update.archos.com/9/gen9/gen9_4.0.26/firmware_archos_it4.aos
Drop this to the 300mb partition called REC. Then press power and let it install.
Now follow the install guide o. The ROM you want to install
Sent from my GT-I9100 using xda app-developers app
Archos G9 101 HD
julle131 said:
Okay... So you have sde installed? Good. First, let's get the official firmware working. Download the latest official ROM from archos:
Drop this to the 300mb partition called REC. Then press power and let it install.
Now follow the install guide o. The ROM you want to install
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Thanks Julle..But Now I understand that official ROM is not installing because of unofficial kernel flash I have already installed and had flushed original one. I think if I get original kernel then I can arrive to original Android ICS which you have mentioned. Please advise if you have any address of original kernel for "firmware_archos_it4.aos".
THANKS and Best Regards...
Further to my above thread...I found the stock kernel and flashed it but still after installing kernel and then original firmware, its giving same error of update failed (221).
Please advise if any remedy you prefer.
Regards...
Hi Julle,
Sorry too many threads from me but very much annoyed but sure thanks Dear for your kind help.
On export of HDD from "Repair system" menu...>>>> A drive appeared in PC but not opening as it says " Insert disk into drive". I think it is the problem which is preventing from installing the AOS file to run Android.
Please advise.
Regards,
hondacity said:
Thanks Julle..But Now I understand that official ROM is not installing because of unofficial kernel flash I have already installed and had flushed original one. I think if I get original kernel then I can arrive to original Android ICS which you have mentioned. Please advise if you have any address of original kernel for "firmware_archos_it4.aos".
THANKS and Best Regards...
Further to my above thread...I found the stock kernel and flashed it but still after installing kernel and then original firmware, its giving same error of update failed (221).
Please advise if any remedy you prefer.
Regards...
Hi Julle,
Sorry too many threads from me but very much annoyed but sure thanks Dear for your kind help.
On export of HDD from "Repair system" menu...>>>> A drive appeared in PC but not opening as it says " Insert disk into drive". I think it is the problem which is preventing from installing the AOS file to run Android.
Please advise.
Regards,
Click to expand...
Click to collapse
To install the update I linked, you shouldn't need any kernel changes. Removing kernel from SDE removes the official kernel, but that does not prevent installing official update. Also installing custom kernel will not prevent installing official rom.
I just do not understand why you get the 221 error as most of the people get it when that have incorrect file there or already have newer stock ROM installed. It is possible that your windows format broke it, because windows formats it to wrong format. You should never format any other than sdcards in windows. You could try the format system in recovery and choosing reformat device. After that install the official update I linked.
Sent from my GT-I9100 using xda app-developers app
Archos G9 101 HD
julle131 said:
To install the update I linked, you shouldn't need any kernel changes. Removing kernel from SDE removes the official kernel, but that does not prevent installing official update. Also installing custom kernel will not prevent installing official rom.
I just do not understand why you get the 221 error as most of the people get it when that have incorrect file there or already have newer stock ROM installed. It is possible that your windows format broke it, because windows formats it to wrong format. You should never format any other than sdcards in windows. You could try the format system in recovery and choosing reformat device. After that install the official update I linked.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Thanks again Dear,
I applied same as you say but ending on same 221 error. Any thoughts please.
Best regards.:crying:
Motorola Defy Mini XT320/XT321 all-in-one script/utility
I've ported mattlgroff's DROIDRAZR all-in-one Script to the Motorola Defy Mini XT320/XT321. This will make life easier and it will do it for you.
Make sure you have fastboot mode if not please refer to this guide for fastboot but there is a fastboot checker in option 6 but it won't install fastboot for you.
Link: http://forum.xda-developers.com/showpost.php?p=36199694&postcount=3
Options available:
1. Root your Motorola Defy Mini XT320/XT321
2. Install 2nd-init/TWRP Recovery
3. Overclock installation
4. Unroot Device
5. Wipe Data/Factory Reset
6. Fastboot checker.
7. Exit Utility
Instructions:
NEW PACKAGE & instructions
1. Download the EXE file at http://www.mediafire.com/?c81fnrtrki65e9i
2. Double click on the exe.
3. Choose an option by entering a number from 1 to 7
OLD PACKAGE & instructions
1. Download package at [REMOVED OLD LINK]
Please Download the fixed package at http://www.mediafire.com/?krxtemrthsz5ier
EXE Version: http://www.mediafire.com/?0kwmx4whjj1ua8c
2. Extract the zip file making sure all the files are in the same place.
3. Click on the batch file named 'DefyMiniUtility.bat'
4. Choose an option by entering a number from 1 to 7.
Credits to:
- Bernd.Defy for overclock module and Guitwo2 for init.d script
- Guitwo2 and jkkk88 for TWRP and aweosomeabhjeet for 2nd-init
- DoOMLoRD for unroot script
- Mattlgroff for the original DROID RAZR all-in-one script
If anyone knows if I missed a member for the credits, please PM me. Thanks
Make sure press thanks if it works
Guys please don't repost it as your own work, otherwise I'll report it and you will get banned from XDA.
NOTE: If you have previously used the old EXE to install TWRP then please remove the old folders by using these instructions using cmd before using updated exe to install TWRP;
1.
Code:
adb shell
2.
Code:
su
3.
Code:
mount -o remount,rw -t yaffs2 /dev/block/mtdblock11 /system
4.
Code:
rm -R /system/bootmenu
Then use the updated exe to install TWRP.
NOTE: If you don't like TWRP, you can download Guitwo2's Permanent CWM at http://forum.xda-developers.com/attachment.php?attachmentid=1875373&d=1365682716
Temporary CWM Recovery: http://forum.xda-developers.com/attachment.php?attachmentid=1875299&d=1365680458
2nd-init does NOT work in CWM Recovery
Thanks to @Guitwo2 for CWM Recovery.
Instructions on how to install Permanent CWM Recovery:
1. Make sure stericson-busybox is installed
2. Put XT320_bootmenuV2.zip in the root of your sdcard
3. Reboot into fastboot mode by typing this command in cmd:
Code:
adb reboot bootloader
4. Then type this command in cmd:
Code:
fastboot boot recovery.img
5. Then use volume keys to navigate and power button to select option. Select install zip from sdcard, then select XT320_bootmenuV2.zip and select yes to install the zip file
6. Then reboot device by selecting reboot device now.
CWM 6 has a bug where it asks you to 'disable recovery flash' when you select reboot system now make sure you select NO or you will soft brick your device.
Changelog:
-v2 No need to mount /sdcard in CWM Recovery. Fixed TWRP installation issues.
-v2.0.1 Released an .exe version of script, to simplify installation
-v2.0.1.1 Fixed bootmenu.zip
This can install a custom recovery?
This can install a custom recovery?
Thank you
The root process worked for me. Now i can install link2sd and set up a swap partition.
I cant install TWRP and i think the reason is that the bat was having some problem to send that bootmenu.tar file to my sd card. I tried to send that file myself before starting the entire process and it didnt worked.
I took a picture of the error i'm getting . Thank you again, i was really mad about that low internal space xD
same problem... someone can fix it? please
fca.sjc said:
The root process worked for me. Now i can install link2sd and set up a swap partition.
I cant install TWRP and i think the reason is that the bat was having some problem to send that bootmenu.tar file to my sd card. I tried to send that file myself before starting the entire process and it didnt worked.
I took a picture of the error i'm getting . Thank you again, i was really mad about that low internal space xD
Click to expand...
Click to collapse
sfoot13 said:
same problem... someone can fix it? please
Click to expand...
Click to collapse
Ok, I've made a fixed script here. The error was that the sdcard is a directory so it will refuse to push files into it.
Here's the updated script below. Just put the .bat file in the same place as the other files.
Thanks
rootdefyxt320 said:
Ok, I've made a fixed script here. The error was that the sdcard is a directory so it will refuse to push files into it.
Here's the updated script below. Just put the .bat file in the same place as the other files.
Click to expand...
Click to collapse
Ty for the quickly answer.
Btw, my gsm network wasnt working after the root process. If the same thing happens to someone else, just do a master reset and it will work again.
pull command is working now
That sdcard copy part is working now. The TWRP process is still not working for me. I tried to do myself the commands using the adb interface and when i use the command to intall the tar, i got the message 'tar: no space left on device" . I hope you can help me with that and i'm sorry about all this questions xD .
fca.sjc said:
That sdcard copy part is working now. The TWRP process is still not working for me. I tried to do myself the commands using the adb interface and when i use the command to intall the tar, i got the message 'tar: no space left on device" . I hope you can help me with that and i'm sorry about all this questions xD .
Click to expand...
Click to collapse
You must have more than 5MB free in your /system partition. Please move your apps to the /flex partition or delete the useless apps in /system.
rootdefyxt320 said:
You must have more than 5MB free in your /system partition. Please move your apps to the /flex partition or delete the useless apps in /system.
Click to expand...
Click to collapse
Thank u so much to everyone who make it possible xD
(can i do now a overclock to 720 without problems?)
sfoot13 said:
Thank u so much to everyone who make it possible xD
(can i do now a overclock to 720 without problems?)
Click to expand...
Click to collapse
Yes but it sometimes gets unstable so you should overclock to 700MHz which is the highest I got without reboots. pll2_l_val=73 gives you 700MHz.
rootdefyxt320 said:
Yes but it sometimes gets unstable so you should overclock to 700MHz which is the highest I got without reboots. pll2_l_val=73 gives you 700MHz.
Click to expand...
Click to collapse
Thank u so much and TWRP doesn't work xD i have 8.5 mb free on system but it can't create the folders on bootmenu
sfoot13 said:
Thank u so much and TWRP doesn't work xD i have 8.5 mb free on system but it can't create the folders on bootmenu
Click to expand...
Click to collapse
I've released an .exe version of my script. This should work now .
Link: http://www.mediafire.com/?0kwmx4whjj1ua8c
Thank u bro and sorry but i can't overclock it to 700 =/
i installed TWRP but it doesn't work and when i turn on my mobile it freezes on home screen :/ is a mess.... it's possible install it via recovery (temportal CWM)?
OFF TOPIC.
Congrats on your well deserved mention on the portal.
sfoot13 said:
i installed TWRP but it doesn't work and when i turn on my mobile it freezes on home screen :/ is a mess.... it's possible install it via recovery (temportal CWM)?
Click to expand...
Click to collapse
It worked for others but in your situation the only thing I can advise is to do a data wipe and relfash SBF file. Just go to Guitwo2's there to install permanent CWM.
Link: http://forum.xda-developers.com/showthread.php?t=2229233
rootdefyxt320 said:
It worked for others but in your situation the only thing I can advise is to do a data wipe and relfash SBF file. Just go to Guitwo2's there to install permanent CWM.
Link: http://forum.xda-developers.com/showthread.php?t=2229233
Click to expand...
Click to collapse
:good: Working! Thank u so much, now i have CWM working on my defy mini, i'm really thankful, thanks again
Hi, it's me again... i have a new trouble
i installed the xt320_bootmenu.zip (from this thread http://forum.xda-developers.com/showthread.php?t=2229233) the first time that i rebooted works fine, but the on the second reboot it doesn't work, then i went to data to check if test.log was there and here's the problem... no test.log...
init.d was working fine until that i did it, i guess that my phone have troubles making work init.d
some solution for this annoying guy? thanks in advance!
sfoot13 said:
Hi, it's me again... i have a new trouble
i installed the xt320_bootmenu.zip (from this thread http://forum.xda-developers.com/showthread.php?t=2229233) the first time that i rebooted works fine, but the on the second reboot it doesn't work, then i went to data to check if test.log was there and here's the problem... no test.log...
init.d was working fine until that i did it, i guess that my phone have troubles making work init.d
some solution for this annoying guy? thanks in advance!
Click to expand...
Click to collapse
Looks like 97bootmenu deleted itself, please reinstall the CWM zip again and it should work.
[TOOL] [v3.2] [09NOV] Ubuntu Touch "system-image" Installer // w/o computers
# All credit goes to Ubuntu and contributors
ut-system-installer
I wanted to install Ubuntu Touch system-image (official, ro, OTA-enabled, for-sale-in-the-future) on my Galaxy Nexus, but there were some limitations and disadvantages to do so. It requires Ubuntu on my computer and completely wipes my device. Compared to cdimage-touch, which one can install easily with his/her phone, system-image is hard for some people to try, so I made a simple recovery-flashable zip with shell scripts to install it without computer and losing data. It downloads and installs system-image on your device(officially supported ones only).
What is does:
The same thing as doing
Code:
phablet-flash ubuntu-system --channel devel --no-backup
but without wiping the device, so
-Download files for installing Ubuntu Touch system-image (half-automatically)
-Install it on your device (supported ones by Canonical)
Supported Devices:
-Galaxy Nexus (maguro, toro, toroplus)
-Nexus 7 (grouper, tilapia)
-Nexus 4 (mako)
-Nexus 10 (manta)
Downloads:
http://d-h.st/users/zittoro/ut
Do not use anything in wip folder.
* This will install a CWM-based recovery from Ubuntu, and your device could brick but will not be compensated. *
How-to:
1. Download the zip.
2. Unzip it in /sdcard/Download/ut
3. Move or copy ut-system-dl(read "Arguments for "ut-system-dl"" in second post for options) to /data. Then run the script with root(su). You can just type these in terminal instead of doing this step manually (You need busybox and su installed)
Code:
su
cp -a /storage/emulated/0/Download/ut/ut-system-dl /data
sh /data/ut-system-dl
4. Zip everything in /sdcard/Download/ut
5. Flash it in recovery and reboot recovery (Just use the default install menu at home if you are using special recoveries like MultiROM)
6. Enjoy Ubuntu Touch
Bug reports: post your /sdcard/Download/ut/ut-system.log, /cache/recovery/last_log, and copy of the error if possible
Changelogs:
Code:
[b]09NOV2013[/b]
v3.2
-Added official UT disclaimer link
-Cleaner code
[b]07NOV2013[/b]
v3.1
-Support for "generic customization" channels
[b]03NOV2013[/b]
v3
-Support for "*-customized" channels
-More consistent and easier way of configuring files names to download
v2.2
-Download the recovery image properly as saucy-named doesn't exist in the path anymore. --Thanks to @pildoc for reporting.
[b]21OCT2013[/b]
v2.1
-Log file support to the installation script; still need recovery log because of "system-image-installer"
-Support for trusty-related channels
-Workaround for delta images when device files are the same
-Dropped support for old-channel device images
-Workaround for non-patched recoveries
-Show the actual device names rather than codenames to avoid confusion
[b]19OCT2013[/b]
v2
-Add support for deciding which build number to download --$4
-Fix delta image download
-Mount before extracting files
[b]18OCT2013[/b]
v1.2
-Fix for script error
-Aborts installation if script fails
v1.1
-Recovery installation fix; it wasn't moved to the correct path, my bad:(
-Added log file: ut-system.log
[b]16OCT2013[/b]
v1
-Initial
Arguments for "ut-system-dl":
-$1: -auto: default for script, automatically detects the device's codename using the value for "ro.build.product"
-DEVICE_NAME: images for DEVICE_NAME devices
-$2: -full: default for script, full images used for initial installation
-delta: delta images used for updates(OTA)
-$3: -CHANNEL: use CHANNEL channel to download images, default "devel"
-$4: -BUILD_NUMBER: build number of image
I dont get it
Sent from my Nexus 4 using xda app-developers app
gazhead said:
I dont get it
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
It basically installs the recommended version of ubuntu touch
Looks like your path is wrong? If its going into download/ut shouldn't it be:
su
cp -a /storage/emulated/0/download/ut /data
sh /data/ut-system-dl
hockeyadc said:
Looks like your path is wrong? If its going into download/ut shouldn't it be:
su
cp -a /storage/emulated/0/download/ut /data
sh /data/ut-system-dl
Click to expand...
Click to collapse
Dang I made a mistake
Zittoro said:
Dang I made a mistake
Click to expand...
Click to collapse
Haha no problem. I'm trying this out on my phone(Maguro) and it gets stuck at connecting to the server. Any ideas? Just a ton of people trying to download right now?
hockeyadc said:
Haha no problem. I'm trying this out on my phone(Maguro) and it gets stuck at connecting to the server. Any ideas? Just a ton of people trying to download right now?
Click to expand...
Click to collapse
Can you get a screenshot for me?
Zittoro said:
Can you get a screenshot for me?
Click to expand...
Click to collapse
Actually, i just tried again and its working. 53 min ETA but its ok. When I zip this and flash it, does it remove my current recovery? How do I go back to my current rom in the future?
hockeyadc said:
Actually, i just tried again and its working. 53 min ETA but its ok. When I zip this and flash it, does it remove my current recovery? How do I go back to my current rom in the future?
Click to expand...
Click to collapse
It installs a CWM-based recovery with some tweaks and workout for system-image installation. Since it doesn't even touch your system partition, you can just flash an android kernel and get back to android.
Zittoro said:
It installs a CWM-based recovery with some tweaks and workout for system-image installation. Since it doesn't even touch your system partition, you can just flash an android kernel and get back to android.
Click to expand...
Click to collapse
Nice! That makes it pretty easy. Now we just need a way to dual boot lol. Perhaps a program that allows you to select android or ubuntu, and upon android selection it flashes a new kernel?
hockeyadc said:
Nice! That makes it pretty easy. Now we just need a way to dual boot lol. Perhaps a program that allows you to select android or ubuntu, and upon android selection it flashes a new kernel?
Click to expand...
Click to collapse
It's already possible on gnex.
http://forum.xda-developers.com/showthread.php?t=2480404
This kernel has tri-boot option for android and ut and recovery dual-boot using its recovery
Zittoro said:
It's already possible on gnex.
http://forum.xda-developers.com/showthread.php?t=2480404
This kernel has tri-boot option for android and ut and recovery dual-boot using its recovery
Click to expand...
Click to collapse
Awesome!
hockeyadc said:
Awesome!
Click to expand...
Click to collapse
Hey did you get it installed successfully? Some people in a different community say it doesn't. Did it boot into a new recovery when you rebooted it?
Zittoro said:
Hey did you get it installed successfully? Some people in a different community say it doesn't. Did it boot into a new recovery when you rebooted it?
Click to expand...
Click to collapse
I haven't tried yet. I realized how many apps I need and use on a daily basis, so I would rather not install it yet. Just gonna wait it out until Ubuntu is more complete.
Changelogs:
18OCT2013
v1.1
-Recovery installation fix; it wasn't moved to the correct path, my bad
-Added log file: ut-system.log
v1.2
-Fix for script error
-Aborts installation if script fails
Blur
can you guys explain to me step by step in doing so. Sorry for being a noob. i want to learn how to so that i can help others and also improve my knowledge..
subaash said:
can you guys explain to me step by step in doing so. Sorry for being a noob. i want to learn how to so that i can help others and also improve my knowledge..
Click to expand...
Click to collapse
1. Download the zip from the link
2. Unzip it to the specified directory on your phone (you can do this with a file explorer app)
3. Download a terminal app and copy and paste the "code" into it.
4. If you get an error, post your /sdcard/Download/ut-system.log. If you don't, zip everything in the specified folder and flash it in recovery
5. Reboot recovery right after the installation
Changelogs:
19OCT2013
v2
-Add support for deciding which build number to download --$4
-Fix delta image download
-Mount before extracting files
Will this work with kulturom(nexus7) AS secondary ROM?
Wysłane z mojego Nexus 7 przy użyciu Tapatalk