Develop Bugs

(guide) how to root generic tablets with ics 4.0.4 (a13)

So today we see many tablets that are very cheap and the price starts from 100 dollars and even less.
Many consumers buy them and are happy with the stock setting but some of us want to get the most of the device and we now how we call this-------exactly ROOTING
But there we get this problems like:
Who is the manufacturer?
Why there is no information about the device?
Why ADB dont work?
and so on.......
My Father picked up a EXPLORE X770 like you can see on the pictures and the specs too ( ist a A13 device ) and cost 80 euros......he buyed it as a christmas present for my mother
Its quite fast but even my mother asked me the first minutes of use: Hey can you root it?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So I did with these steps:
Download DooMLoRD_v1_Xperia-2011-ICS-ROOT-emu-busybox-su.rar; http://forum.xda-developers.com/showthread.php?t=1601038
Download PDAnet (ADB drivers for tablets - how to install is described in the LInk); http://www.topnotchtablets.com/installADBdriver
Enable UNKNOWN SOURCES and Connect your tab in USB DEBUGGING mode, then run runme.bat file from the package.
Sit back read the on screen instructions
The device will reboot a couple of times
When the script finishes it will say "ALL DONE" Your tablet is rooted.
HIT THE THANKS IF YOU THINK THIS POST IS USEFUL ETC

Does it works with any generic tablet? I have a GT-7240 (7inch by.Genesis).
Sent from my GT-S5830i using Tapatalk 2

:good: :good: It's all good It work's for me !
Ampe a85 fashion

flaviamassa said:
Does it works with any generic tablet? I have a GT-7240 (7inch by.Genesis).
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
if on the box is written: allwinner a13 you are good to go

Problem
hello everyone I hope that you will be able to solve my problem then voila I have a A13 and i-MID ssuivi the tutorial to the letter are unknown sources and debugging enabled USB is enabled and also when I run the runme makes me starting, waiting for device
-daemon not runnig.starting it now
-daemon started successfully
and nothing happens and when I run the PdaNet puts me error 103 what? because I need after the rooter to use my external memory as internal memory.
thank you bye

http :// www. topnotchtablets .com/ installADBdriver
Dead link !

FlouSS said:
http :// www. topnotchtablets .com/ installADBdriver
Dead link !
Click to expand...
Click to collapse
try click this link again http://www.topnotchtablets.com/installADBdriver
the link just work fine with me

HIT THE THANKS IF YOU THINK THIS POST IS USEFUL ETC
Click to expand...
Click to collapse
Hit that thanks button for ya
Thanks so much!Finally i have gotten the adb drivers working and rooted it for my
Allwinner A13 Nuclear Android 4.0.4
THANK YOU!

Ravage32 said:
Hit that thanks button for ya
Thanks so much!Finally i have gotten the adb drivers working and rooted it for my
Allwinner A13 Nuclear Android 4.0.4
THANK YOU!
Click to expand...
Click to collapse
thank you so much sir..i have been searching for this since day one :highfive:

I got giving an a13 M010SQ8 it came rooted running ics 4.0.4 did any of you try root checker first ? mine is also nuclear build and from what iv been reading every a13 must be different
Sent from my M010SQ8 using XDA Premium HD app

My friend bought the same as you recieved and it didn't came rooted.
Some of those chinese clone bunnys are some not i quess.
Sent from my shooteru using Tapatalk 2

I'm not going to bother with cwm recovery or flashing jellybean there isn't any working firmware and I don't think there will ever be
Sent from my GT-S5830 using xda app-developers app

brewy said:
I'm not going to bother with cwm recovery or flashing jellybean there isn't any working firmware and I don't think there will ever be
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
I dont think its worth to try even a JB rom because you might end up without touchscreen working etc......i left it at 4.0 and end of story
Sent from my shooteru using Tapatalk 2

thanks
worked
for VIGO 10 tablet

So , i guess its not gonna work with my i-life wtab 702 running on jb 4.1.1 .
any possibilitiy to root this?

Thanks so much !
HYUNDAI A7 ART ICS 4.0.3 rooted Fine !
:good:

ROOT only: AllWinner (A13) TWD_MID 2G Tablet
gesange said:
So today we see many tablets that are very cheap and the price starts from 100 dollars and even less.
Many consumers buy them and are happy with the stock setting but some of us want to get the most of the device and we now how we call this-------exactly ROOTING
But there we get this problems like:
Who is the manufacturer?
Why there is no information about the device?
Why ADB dont work?
and so on.......
My Father picked up a EXPLORE X770 like you can see on the pictures and the specs too ( ist a A13 device ) and cost 80 euros......he buyed it as a christmas present for my mother
Its quite fast but even my mother asked me the first minutes of use: Hey can you root it?
View attachment 1566537
View attachment 1566538
View attachment 1566539
View attachment 1566540
View attachment 1566541
So I did with these steps:
Download DooMLoRD_v1_Xperia-2011-ICS-ROOT-emu-busybox-su.rar; http://forum.xda-developers.com/showthread.php?t=1601038
Download PDAnet (ADB drivers for tablets - how to install is described in the LInk); http://www.topnotchtablets.com/installADBdriver
Enable UNKNOWN SOURCES and Connect your tab in USB DEBUGGING mode, then run runme.bat file from the package.
Sit back read the on screen instructions
The device will reboot a couple of times
When the script finishes it will say "ALL DONE" Your tablet is rooted.
HIT THE THANKS IF YOU THINK THIS POST IS USEFUL ETC
Click to expand...
Click to collapse
THIS IS FOR (ROOT ONLY) ALLWINNER (A13) TWD_MID 2G TABLET w/ ICS 4.0.4
I never could find firmware from AllWinner (hopefully it's OK to provide their site: allwinner & allwinnertech dot com), never could find usb driver(s) & never could get the tablet or my pc to recognize each other (nothing here worked). Frustration & ignorance made me wonder why you have to have a pc to root an android device. I still don't have that understanding. What I DO have is an .apk that successfully rooted this tablet - here's the what & how:
1) dl these on the tablet: "framaroot 1.5.1" (available here courtesy of Alephzain - THANK YOU), a file manager if you don't have one (I have ASTRO), and "Root Checker" (free, google play store)
2) pre-root tablet settings: settings>dev options> enable USBdebugging
settings>security> enable unknown sources
3) run framaroot - in a blink it's done. run root checker to verify. go back into settings & uncheck usbdebug & unkn sources
There wasn't much to rooting this device - I wanted to practice on something before attempting anything exotic on my LG MS910 (MetroPCS).
This tablet already has ICS & I won't be too surprised if there never is a JB ROM that works 100% (I keep reading about touchscreen issues) but I'm learning & little successes like this are motivating.

Allwinner a13 rom
Hi thanks for your post but I have a different problem. After spending my time on googling I managed to confim the model chipset. However my tablet is stuck in bootloop and I am unable to get into recovery mode. Is there any software like restore binary for MMX canvas where you can flash rom while tab is turned off. I just want to install a recovery and turn on the tablet.

Nice job works with trio stealth g2 7inch tab
Sent from my G2 using XDA Premium 4 mobile app

Thanks a lot, this really worked for me!!!

[Q] Occasional massge: "camera has stopped working"

Hello guys, im a new user to android, moved from IOS and bought the Note 2.
it is 3 months old and the previous owner said he made no changes to it what so ever, the rom version is "N7100XXDLK7 N7100PRTDLK5 - Download - Poland (Play)"
i dont know how to check if its rooted or not but it should be stock just like out of the box.
so my problem is this, the phone works 100% fine but sometime when i open the camera it goes to the camera screen. with buttons and everything but in the square where you should see the picture you see pitch black. nothing.
then the phone stuck for like 5 secs, goes to home screen and shows a massage "unfortunately camera has stopped working", then if ill go and open the camera again it works 100% ok.
this also happens with 3rd side applications that uses the camera like "camera zoom fx" and so.
heres the picture of the screen in the camera mode
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
any help on what should i do to get the camera working 100% of the times guys? thanks!

First of all your device running on old ROM which have SDS brick bug, and can be brick any time without any reason
So i reommend to update to latest version, this also should fix issue
On existing ROM, meantime try
setting - appl manager-All - camera - clear data
Here you can find latest ROM
http://forum.xda-developers.com/showthread.php?t=1896696
unfortunetely there is no update for your carrier (poland - play), but you can flash any other like poland unbranded

dr.ketan said:
First of all your device running on old ROM which have SDS brick bug, and can be brick any time without any reason
So i reommend to update to latest version, this also should fix issue
On existing ROM, meantime try
setting - appl manager-All - camera - clear data
Click to expand...
Click to collapse
about the "setting - appl manager-All - camera - clear data", did that already with no help.
and for the rom updating issue, im very new to android, can you please tell me how to update my rom to the latest version ASAP? thanks!

I have edited previous msg
Go to above said thread, you will find this ROM for poland
N7100XXDMB2 N7100OXXDMB1 - Download - Poland
download and flash using odin
All the instruction available on post#1
let us know if you have any confusion

dr.ketan said:
I have edited previous msg
Go to above said thread, you will find this ROM for poland
N7100XXDMB2 N7100OXXDMB1 - Download - Poland
download and flash using odin
All the instruction available on post#1
let us know if you have any confusion
Click to expand...
Click to collapse
Funny thing is that im not from poland nor the device is, im from israel so im guessing i should use the israel rom but i see two options:
"N7100XXDMA6 N7100OJKDMA3 - Download - Israel
N7100XXDMA6 N7100OJKDMA3 - Download - Israel (Orange/Partner)"
is there any difference?
thanks!

go with
"N7100XXDMA6 N7100OJKDMA3 - Download - Israel
bcoz below said ROM is carrier specific (orange/Partner) and may have some carrier bloatware
N7100XXDMA6 N7100OJKDMA3 - Download - Israel (Orange/Partner)"

I had the problem too just dont worry its a stupid app juat uninstall transparent screen, crack screen etc. Or any other suspecious app download an anti virus software too. And then restart phone BINGO!!!
..................
SENT FROM MY BEAST ★★GALAXY NOTE 2 GT N7100★★ -
USING XDA PREMIUM HD APP

Thanksyou all, i will try, for the first time ever, to burn a new rom to my device, just a quick question before i do so:
after installing the new rom does all of my info/apps are gone? the device will be cleaned? or would my apps and info be saved?
also, should i delete some things from the phone before burning a new rom? thank!

Nothing required to remove before flashing
If everything go smoothly, you will losse nothing
But sometime after flashing you may get bootloop, or stuck at samsung logo.
in case of such circumstances you need to reboot to recovery (vol up+home+power)
and have to wipe cache and wipe data, and doing so, you will lose all data on device as well on int SD memory
So i recommend to backup important data before flashing.

dr.ketan said:
Nothing required to remove before flashing
If everything go smoothly, you will losse nothing
But sometime after flashing you may get bootloop, or stuck at samsung logo.
in case of such circumstances you need to reboot to recovery (vol up+home+power)
and have to wipe cache and wipe data, and doing so, you will lose all data on device as well on int SD memory
So i recommend to backup important data before flashing.
Click to expand...
Click to collapse
ok i did just like the manual said and it seem to gone 100% perfect, except one thing, the device restarted it self and i dident do the
"has been successfully downloaded into the device.
Vol Down Power Key
Home Key" part.
i uploaded a picture of the phone status please tell me if its ok if i got the right rom and im not in SDS danger.
also the camera seems to work fine now.
beside that i want to thank you all alot, you really helped me!

Anyone?
Sent from my GT-N7100 using Tapatalk 2

Yup, it's sds patched rom. Enjoy.
Sent from my GT-N7100 using xda premium

Im gonna kill myself
Any help?
Sent from my GT-N7100 using Tapatalk 2

Bump, wiped everything and installed a new clean rom and im still getting "camera has stopped working" massages, also i have a 2 seconds lag between pressing the camera icon until the camera activates, does all note 2 got this lag?
Thanks.

Thanks for your great work it works very well.
I only faced a problem when I try to open the gallery from the Camera it says that ""camera has stopped working"
Maybe because it uses the Gallery which is not included in your ROM.
Please help.

zopo c2 review.and How to Update ZOPO C2 to Android 4.2 OS

zopo c2 review.and How to Update ZOPO C2 to Android 4.2 OS
Zopo C2 runs Aliyun OS, which is a Linux-based system "inspired" by Android.
How to Update ZOPO C2 to Android 4.2 OS ? look at the video...
Zopo C2 smartphone gets official, brings Aliyun OS for a low, low price ,
As expected, Zopo will sell 5000 devices to the market in April, and the buyer can order.
now you can pre-order in zopomobileshop.com
-------------------------------------------------------------------------------------------------------------
How to Update
--Download follows file to your PC
1.Firmware:Download ZOPO C2 ROM(android 4.2-130422)
2.SP Flash Tool (Latest version:4.2)
PS:If you do not know how yo use the SP Flash Tool,please here to learn:[TUT]MTK Android (Sp flash tool ) tutorial
Make sure that you have MediaTek DA USB VCOM drivers installed.
--First of all,extract the firmware entire contents of the zip file ,after open SP Flash Tool,
then click Scatter-loading button to load the correct scatter file
(MT6575_Android_scatter_emmc.txt or "MT6589_Android_scatter_emmc.txt", depending on which phone you have)
for your device and ignore any message that may appear.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
--Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
Press F9 (or hit Download button) and connect your phone into the computer via USB data cable.
The process will start and a red progress bar will appear.
Attention: Please follow the instructions carefully. I will not take any responsibility on whatever may happen with your phone.
Very important warning: Always make sure that you trust the sources of the ROM you download and know that it is meant for your phone.
After flashing a wrong preloader, your phone will be completely dead (can't be powered on, it will not charge and won't be detected anymore
by the computer) and there is no way to recover it.
Source：
zopo c2 review.and How to Update ZOPO C2 to Android 4.2 OS
http://forum.zopomobileshop.com/forum.php?mod=viewthread&tid=354&fromuid=13374

Anyone already has this phone? Can custom ROM and rooting methods for Zopo zp980 be used for this phone?

javlada said:
Anyone already has this phone? Can custom ROM and rooting methods for Zopo zp980 be used for this phone?
Click to expand...
Click to collapse
I've ordered one, but It will be shipped on the 2nd of may. As far as I've read the zp980 rom is fully compatible with the C2. This will most probaly mean that any custom rom for the 980 will work on the C2.
The rooting method is the same for all the MTK quadcore phones out there (hence a few exeptions), so that won't be a problem.

I bought one in Hk thru Taobao.com and I flashed it to Android 4.2.1 and is pre rooted.
Very fast and smooth after changed to Android 4.2.1. Ali OS is very laggy and slow.
The screen is fantastic, the color and viewing angle are actually better than my LG optimus G pro.
Too bad the phone doesnt support 4g and battery only 2000mah. The phone feels quite plastic too.
Overall the phone is quite decent as long as u install Android on it.

can you please provide the full tutorial and requiered files, thanks
---------- Post added at 02:01 PM ---------- Previous post was at 01:59 PM ----------[/SI

kalunlee said:
I bought one in Hk thru Taobao.com and I flashed it to Android 4.2.1 and is pre rooted.
Very fast and smooth after changed to Android 4.2.1. Ali OS is very laggy and slow.
The screen is fantastic, the color and viewing angle are actually better than my LG optimus G pro.
Too bad the phone doesnt support 4g and battery only 2000mah. The phone feels quite plastic too.
Overall the phone is quite decent as long as u install Android on it.
Click to expand...
Click to collapse
Would you please share the flash procedure and the tool used? Thanks mate!

I have the rom and the flash tools however I dont have the online storage to put the file to.

Can you put a tutorial and give links from where you collected the files.thanks
Sent from my GT-I9300 using Tapatalk 2

I am unable to post any links because I dont have enough posts LOL

You can pm to me or email at [email protected]
Sent from my GT-I9300 using Tapatalk 2

kalunlee
I am unable to post any links because I dont have enough posts LOL
---
If you really have the way and source to do it and you are willing to share, you must have some ways to use the limited right to share here
hope you are
and thx for your effort

kalunlee said:
I am unable to post any links because I dont have enough posts LOL
Click to expand...
Click to collapse
just write the link with spaces -like: www google com

Rom
h t t p : / / pan. baidu. com/share/link?shareid=418253&uk=3892607136
Flash Tool
h t t p : // pan. baidu. com/share/link?shareid=381707&uk=4214607308&third=15
Driver
h t t p : // pan. baidu. com/share/link?shareid=422469&uk=4197399152
Pull battery out and put battery in. While the phone is off connect USB cable to the computer
Install the driver
Use the flash tool and flash the rom.
I got all these files from
http : // www. 592zn. com/forum-254-1.html
I flashed the rom and it works fine for me but I am not responsible if something goes wrong with your phone.

Which code on file with the rom?

javlada said:
Anyone already has this phone? Can custom ROM and rooting methods for Zopo zp980 be used for this phone?
Click to expand...
Click to collapse
Easier Root Most MTK6589 Devices Including ZOPO ZP980/ C2/ZP810
http://forum.zopomobileshop.com/forum.php?mod=viewthread&tid=397&fromuid=13374
I would like to share with you a root tool that worked with me for ZOPO ZP980/ C2/ZP810 MTK6589 and should work on most similar devices too.
First off, let me say that I did not develop this schtuff and all thanks should go to those that did. Special thanks to YIDONGSHUSHU for all their work.
General Disclaimer:
Use these tools and this guide at your own risk. Doing these things wrong/improperly/etc. has the ability to completely ruin your device and YOU assume all risk and responsibility if that happens.
Also note that rooting WILL violate the manufacturers warranty on the device making it ineligible for warranty repair. If you have insurance on the device however, they MAY still replace it for the cost of your deductible.
STEP1. Turn on Debugging on your Phone
●Open Settings
●Select "Developer options" in the System section
●Check the box for "USB Debugging"
●Press "OK" to confirm.
STEP2.Plug you phone up to your computer using the USB cable and allow the drivers to install.
If you are using Windows, ensure you have installed the latest MTK USB drivers available for your phone........
and How to have rights Root on Zopo Zp980
http://forum.zopomobileshop.com/forum.php?mod=viewthread&tid=337&fromuid=13374
I hope this useful.

I am waiting for my c2.Those who are using what they feel about the phone and what about the camera and battery life.
Sent from my GT-I9300 using Tapatalk 2

Just today I received my C2. Compared to my old Motorola Defy, the phone is really huge.
It came with Android 4.2 preinstalled, I just had to root it. But there is one thing that's bothering me. Since the ROM is apparently for Zopo ZP980, it report incorrectly the size of internal storage. Furthermore I would like to disable it at all as user accessible memory and use all 4GB for apps.

Newbie Guide
Sry noob question but do I need to root before flashing the rom?
Thanks.
@kaunlunlee
can you pls provide step by step tutorial for newbie like me?
Thanks a lot..

so! anyone has a little review to saciate us? who have the phone aready can tell us how is the screen or the camera or the speakers...
please guys :X

Ulefone Be One [IN-DEPTH REVIEW] 5.5 Inch HD IPS OGS, MTK6592M 1.4GHz Octa Core

FULL IN-DEPTH USER REVIEW
UNBOXING
Camera Samples here
https://plus.google.com/photos/100582382505207418108/albums/6104171523422661201
Antutu v5.6 Score: 32.100 (Very good for a MTK6592M 1.4GHz)
Specifications
- 5.5 inch IPS HD screen LG OGS 1280x720 pixels
- MTK6592M 1.4GHz Octa-Core
- GSM 850/900/1800/1900MHz, WCDMA 850/1900/2100 MHz
- 1GB RAM + 16GB ROM
- Notification LED in different colors
- Touch Buttons with backlight
- Supports TF card
- Sony 13 MP rear camera + front camera 8 MP
- Android 4.4.2 (Android 5.0 update later, according Ulefone)
- Battery 2350 mAh
- Dimensions (W × D × H) 157 * 77.8 * 8.8mm
- Wake gestures, Double Tap Wake
GPS Test / WiFi Analyzer / Speednet WiFi Speedtest (50:2 Line) / Antutu 5.6
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

How can we root this device?

RadioactiveToy said:
How can we root this device?
Click to expand...
Click to collapse
Like this http://www.youtube.com/watch?v=m1WGNan1p88 at time: 4:44

Thanks a lot.!

Hi,
Is there a recovery like TWRP or CWM for it?
Thanks

twrp and rom
is there twrp for this guess there would be what would the recommended rom be

They said that the lollipop will be supported by this model but when it will be available?
Because in my case i don't have an option to do "check for updates" or "wirless update".
Are they lying about it?
CUMPS!

So far, yes...
[email protected] said:
They said that the lollipop will be supported by this model but when it will be available?
Because in my case i don't have an option to do "check for updates" or "wirless update".
Are they lying about it?
CUMPS!
Click to expand...
Click to collapse
So far, yes. All their buzz (what little of it there is) is about the update for the Be Pro (which they also haven't released.).
Which is sad, because this is a rock solid phone; my only complaint after 2.5 months is the lack of the promised update, which was supposed to happen 1.5 months ago..

marblemunkey said:
So far, yes. All their buzz (what little of it there is) is about the update for the Be Pro (which they also haven't released.).
Which is sad, because this is a rock solid phone; my only complaint after 2.5 months is the lack of the promised update, which was supposed to happen 1.5 months ago..
Click to expand...
Click to collapse
Yeah! Now the promises goes to their new phone release on the next month. I don't think any will run Lollipop ever...

[email protected] said:
They said that the lollipop will be supported by this model but when it will be available?
Because in my case i don't have an option to do "check for updates" or "wirless update".
Are they lying about it?
CUMPS!
Click to expand...
Click to collapse
You can still upgrade via recovery mode

suoko said:
You can still upgrade via recovery mode
Click to expand...
Click to collapse
I don't think a company will make such a thing to turn it official because not all people know how to do it.

GPS does not work.
The only way I was able to enable it and have sat fixed was by making ygps alway run in background.
I refer to ygps available through engineering mode.

suoko said:
GPS does not work.
The only way I was able to enable it and have sat fixed was by making ygps alway run in background.
I refer to ygps available through engineering mode.
Click to expand...
Click to collapse
Do you been able to download EPO files there (on engineering mode)?
Beacuse i wasn't and it still doesn't fix the satellites...

[email protected] said:
Do you been able to download EPO files there (on engineering mode)?
Beacuse i wasn't and it still doesn't fix the satellites...
Click to expand...
Click to collapse
I can't download epo datas either but it now fixes sats correctly on mine.
I Just enabled background ygps and rebooted
---------- Post added at 02:10 PM ---------- Previous post was at 01:54 PM ----------
[email protected] said:
I don't think a company will make such a thing to turn it official because not all people know how to do it.
Click to expand...
Click to collapse
You can update a phone with an app if you want:
http://stackoverflow.com/questions/25587474/how-can-i-flash-zip-in-recovery-from-an-app-in-android
They just have to want to do it. We should ask ule.
BTW, I'd ask for a better camera management in a kk updated rom: the sensor is not bad at all
The ROM With FOTA menu enabled is located here:
http://www.android-hilfe.de/ulefone-forum/667345-ulefone-one-fw-update-anleitung.html

To fix satellites I followed this guide:
0) Enter Engineering menu dialing these numbers *#*#3646633#*#*
1) Select Engineering mode for MTK
2) Select YGPS -> Information -> and tap on 'AGPS restart'
3) Exit YGPS and select LocationBasedService.
4) Select AGPS -> Enable A-GPS
5) Select GPS
6) Select FULL
7) Tap on Ref Position and see if some location datas are present: enter your current position (Lat,Long) if it's empty. Select ok.
8) Let the GPS start by tapping on GPS (OFF). It will become 'ON' and will procede with fixing the position
9) Tap on GPS (ON), it will become OFF
10) Select HOT instead of FULL
11) Enter Ref Position and tap 'Apply Last Position'.
12) Reboot
13) Install GPS Status & Toolbox and see if it fixes satellites easily
http://forum.hdblog.it/index.php?/topic/40662-guida-per-il-gps-dei-dispositivi-android-mtk/

Ulefone be one have a Gyroscope ??
Please can someone who have Ulefone be one tell if it have a gyroscope sensor because I've seen in some videos , some antutu sayed that it have , but others sayed that it have not , I want to buy this phone but I don't if it have a gyroscope or not because I want to use it with google cardboard , so pleaaaaaaaaaaaaaase if you have this phone give me an answer cz I'm confused :crying:

I've recently bought a Be One, from antelife.
It has a problem.
It is randomly loosing cell signal. Tried with just 1 sim card, and it lost signal after a while also.
The only thing i can do is restart the phone.
Anyone else with this problem? Is there a solution for it ?
Or what custom room shoul i try to solve this issue ?
ty

Gugull said:
I've recently bought a Be One, from antelife.
It has a problem.
It is randomly loosing cell signal. Tried with just 1 sim card, and it lost signal after a while also.
The only thing i can do is restart the phone.
Anyone else with this problem? Is there a solution for it ?
Or what custom room shoul i try to solve this issue ?
ty
Click to expand...
Click to collapse
Mine is all fine until now. Try to speak with Antelife, it might be hardware problem.

http://www.mtkroms.com/2016/01/latest-stable-cyanogenmod-12.1-for-mt6592.html?m=1

Ulefone Be One Problem
Hello
I had some problem with loading ROM on my Ulefone Be One(because of drivers). When I was doing that i had to restart my phone several times. Now when I finally made it i turn on my phone and all what I get is brighter screen. I waited for about 30/40 seconds and just swipe up the screen with my finger and i heard the sound of unlocking(so that probably means that everything is OK with ROM).
Any suggestions what to do now?

Auto-Rotate, Motion Launch Gestures not working

hi i just bought HTC e9+ Dual Sim, i ask my friend in Taiwan to buy it.
i'm from indonesia
after upgrade the os i started to use my phone and notice that the motion launch gesture not working also the auto rotate function
i've try to calibrate and still nothing
can anyone help me?

klaudjkt said:
hi i just bought HTC e9+ Dual Sim, i ask my friend in Taiwan to buy it.
i'm from indonesia
after upgrade the os i started to use my phone and notice that the motion launch gesture not working also the auto rotate function
i've try to calibrate and still nothing
can anyone help me?
Click to expand...
Click to collapse
hi
-you can enter to recovery and clear cache and dalvik cache.
-you can re-enable the motion launch feature under Settings > Display & gestures or Display, gestures & buttons. Tap Motion Launch gestures.
-last option, hard reset the device
thx

Hi Sheythan, thanks for your reply
btw how to enter to recovery mode? do you mean safe mode? and how to clear cache and dalvik
btw i'm using stock os, not rooted os
thanks btw

klaudjkt said:
Hi Sheythan, thanks for your reply
btw how to enter to recovery mode? do you mean safe mode? and how to clear cache and dalvik
btw i'm using stock os, not rooted os
thanks btw
Click to expand...
Click to collapse
power off the device
press volume-down button and power button at the same time, wait 5-6 seconds
you will enter download mode
reboot to bootloader
enter recovery
wipe cache
reboot
and try again the motion

when i try to enter recovery boot mode, the phone just hang

klaudjkt said:
when i try to enter recovery boot mode, the phone just hang
Click to expand...
Click to collapse
wait for 1-2 minutes at recovery mode.
it behaves like it is hanged but be patient after 1-2 minutes you will see the menus.

I have the same problem too,tried everything with no luck,hope mm update fixes this.
Sent from my HTC One E9PLUS dual sim using Tapatalk

Sheythan... said:
wait for 1-2 minutes at recovery mode.
it behaves like it is hanged but be patient after 1-2 minutes you will see the menus.
Click to expand...
Click to collapse
after waiting 2minutes it just restart to my homescreen and still can't
vaykossil said:
I have the same problem too,tried everything with no luck,hope mm update fixes this.
Sent from my HTC One E9PLUS dual sim using Tapatalk
Click to expand...
Click to collapse
I've already fix my problem without clearing cache
hi vaykossil, try to download sensorbox from your playstore and then select gyroscope sensor, after that see that the box is moving when u move the phone, if its moving that your hardware is okay
Now i can rotate my phone and motion launch gesture all working fine, just download Sensor Box from your playstore

Hi klaudjkt,just downloaded the app you named and seems my sensors are ok,but I still have rotation issue in apps,all my sensors just stop responding and after a while start working again,have no idea what the problem is,maybe mm will fix this.

vaykossil said:
Hi klaudjkt,just downloaded the app you named and seems my sensors are ok,but I still have rotation issue in apps,all my sensors just stop responding and after a while start working again,have no idea what the problem is,maybe mm will fix this.
Click to expand...
Click to collapse
have you tried hard reset ?
Sent from my HTC One E9PLUS dual sim using XDA Free mobile app

Sheythan... said:
have you tried hard reset ?
Sent from my HTC One E9PLUS dual sim using XDA Free mobile app
Click to expand...
Click to collapse
No,I haven't,too many apps and data on my phone,just don't want to setup my phone from scratch,maybe after marshmallow.

Hi,after a week decided to factory reset my phone to get sensors work,but unfortunately it didn't help, my sensors are still acting weird,they stop working occasionally and all sensors stop working all of a suuden,any help is appreciated.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

vaykossil said:
Hi,after a week decided to factory reset my phone to get sensors work,but unfortunately it didn't help, my sensors are still acting weird,they stop working occasionally and all sensors stop working all of a suuden,any help is appreciated.
Click to expand...
Click to collapse
Hi Vaykossil, i found another solution, try to heat up your phones ( i try to open waze and maximize brightness ) for about 5minutes, and then try again. it works for me

klaudjkt said:
Hi Vaykossil, i found another solution, try to heat up your phones ( i try to open waze and maximize brightness ) for about 5minutes, and then try again. it works for me
Click to expand...
Click to collapse
Hi,thank you for the tip,tried to overheat the phone but couldn't get the temp too high,seems our chipset doesn't get hot at all,is there any app to force all cores run at highest frequency ?

you don't need to overheat your phone, but u can download stability test on playstore to stress your phone

dear i have the same prb....
vaykossil said:
Hi klaudjkt,just downloaded the app you named and seems my sensors are ok,but I still have rotation issue in apps,all my sensors just stop responding and after a while start working again,have no idea what the problem is,maybe mm will fix this.
Click to expand...
Click to collapse
.please tell me if you have fix it and how to fix it...thanx

Hi,I tried everything but no chance, seems my sensors are broken, went to a service center, he hadn't time to look at my phone but there were 3 other e9+ there with sensor issues, will take it to service tomorrow to identify the problem, will share the result when get it back.
Sent from my HTC One E9PLUS dual sim using Tapatalk

I'm in same pain bro.

keep us up tp date plz
vaykossil said:
Hi,I tried everything but no chance, seems my sensors are broken, went to a service center, he hadn't time to look at my phone but there were 3 other e9+ there with sensor issues, will take it to service tomorrow to identify the problem, will share the result when get it back.
Sent from my HTC One E9PLUS dual sim using Tapatalk
Click to expand...
Click to collapse
dont forget to share the result plzzz

ade.l said:
dont forget to share the result plzzz
Click to expand...
Click to collapse
sure,called me from service yesterday and told me the power IC is half dead,sensors can't get power to work properly,they will replace the ic for 40 box and send it back asap,I think it will be here on monday.