Related
Has anybody tried the tetrax mounts yet with their galaxy nexus? Before I purchase one I'm curious of two things.
1. How well does the the magnet stick to the battery door since the battery cover is textured? I have an extra cover that I'll use simply for this.
2. Does the magnet interfere with the NFC and/or screen at all?
In case your not sure what I'm referring to:
http://store.tetrax.us/xway-line/fixway
I have used this on other phones, including my G2, MyTouch 3G and G1 and it worked very well on all those phones. However, due to the textured back on the Galaxy Nexus, the metal button that stick to the battery door does not stay on. I have tried replacing the double sided tape with stronger automotive 3M tape, but that doesn't work either. It'll stay on for a little while and come back off. The only solution would be to find a battery door that is smooth.
I can't answer if it interferes with NFC or the screen, but it shouldn’t. If anything, it might interfere with the magnet on the compass, but that has not been the case with my other phones.
MetalMessiah78 said:
I have used this on other phones, including my G2, MyTouch 3G and G1 and it worked very well on all those phones. However, due to the textured back on the Galaxy Nexus, the metal button that stick to the battery door does not stay on. I have tried replacing the double sided tape with stronger automotive 3M tape, but that doesn't work either. It'll stay on for a little while and come back off. The only solution would be to find a battery door that is smooth.
I can't answer if it interferes with NFC or the screen, but it shouldn’t. If anything, it might interfere with the magnet on the compass, but that has not been the case with my other phones.
Click to expand...
Click to collapse
Thanks,
So you've actually tried it on the GNex and it don't stick very well? Did you by chance try holding it on there for several hours with a strong clamp or anything? I really want one of these but worried it's a waste of money with this phone
I have actually tried it, but not with a clamp. Just following the regular directions. On my other phones, it created a very strong bond and it takes a lot of effort to remove. With the Nexus, it stays on the first couple of times you mount it, but that's about it. It's not an issue with the weight, as the G2 feels twice as heavy as the Nexus, especially with an extra capacity battery. It's the texture on the battery door. It almost feels like it has a Teflon coating.
MetalMessiah78 said:
I have actually tried it, but not with a clamp. Just following the regular directions. On my other phones, it created a very strong bond and it takes a lot of effort to remove. With the Nexus, it stays on the first couple of times you mount it, but that's about it. It's not an issue with the weight, as the G2 feels twice as heavy as the Nexus, especially with an extra capacity battery. It's the texture on the battery door. It almost feels like it has a Teflon coating.
Click to expand...
Click to collapse
Would you mind holding up one of the magnets to the battery door and test out the NFC to see if it interferes with it (if you have the ability to). This is my main question as I could always put the magnet on a case I guess.
Thanks!
I don't have another NFC device to try it right now, but my brother has the Nexus S and I can try it when I see him later tonight. The magnet doesn't go on the battery door though. What you stick on the battery door is just a piece of metal. The actual magnet is on the device that you mount to your dash or vent, so unless you plan on using NFC while it's on your dash, it should not interfere.
Plus, NFC uses low power radio frequency to transfer information (similar to Bluetooth). It does not use magnets. The only thing in the phone that could be affected would be the compass, as it finds your relation to magnetic North. Even then, I'm sure the compass works through software and is not an actual magnet, as it has never affected GPS. As a matter of fact, I have 2 Tetrax products, the one that mounts to the dash, which I have in my car, and the one that you attach to the vent for when I use a rental on trips for the sole purpose of Navigation. As you can imagine, I was very disappointed when I could not get the metal button to stick. I might have to try it with a case also.
MetalMessiah78 said:
I don't have another NFC device to try it right now, but my brother has the Nexus S and I can try it when I see him later tonight. The magnet doesn't go on the battery door though. What you stick on the battery door is just a piece of metal. The actual magnet is on the device that you mount to your dash or vent, so unless you plan on using NFC while it's on your dash, it should not interfere.
Plus, NFC uses low power radio frequency to transfer information (similar to Bluetooth). It does not use magnets. The only thing in the phone that could be affected would be the compass, as it finds your relation to magnetic North. Even then, I'm sure the compass works through software and is not an actual magnet, as it has never affected GPS. As a matter of fact, I have 2 Tetrax products, the one that mounts to the dash, which I have in my car, and the one that you attach to the vent for when I use a rental on trips for the sole purpose of Navigation. As you can imagine, I was very disappointed when I could not get the metal button to stick. I might have to try it with a case also.
Click to expand...
Click to collapse
Awesome so yea I don't think it'll interfere because I was thinking the part you stick to the back of the phone is magnetic, but if your saying it's not all should be well. Either way I went ahead and ordered it yesterday anyway so I'll figure out a way to get it to stick to either the door or a case. Thanks for your insight!
Nope, it's just a metal button. It actually comes with 4 or 5 different ones of all sizes and styles.
I have this installed on my nexus, I put the mount on my dash and the NFC sticker on my knob for the ac that get covered up. Everytime I put my phone on the mount, the nfc changes it to car mode, volume up, full brightness and launches sirius xm radio...works very well, sometimes I have to move it a bit to get to read the nfc, but thats only cause i have the nfc a little too far at the bottom of the phone and it mounts at a slight angle, not due to any interference at all. I have NFC chips all around and never have problems reading them at all, probably a good idea not to mount the metal chip right in the middle of the battery area, just in case. I also used a clamp to hold it on for about 3 or 4 hours and has had little trouble sticking to the texture.
I have had a few incidents if I pull off the phone, rather than slide it off the backing will actually unclip a single clip.
@ejkeebler what do you mean by NFC stickers all around? Did you make stickers to automatically change your settings on your phone? That's brilliant! How did you do it?
I might also have to try a clamp. I don't really want to put a case on my phone.
MetalMessiah78 said:
@ejkeebler what do you mean by NFC stickers all around? Did you make stickers to automatically change your settings on your phone? That's brilliant! How did you do it?
I might also have to try a clamp. I don't really want to put a case on my phone.
Click to expand...
Click to collapse
I also have NFC stickers everywhere. have them when I walk in the front door of my house, one in my office at work, one in each vehicle, one in my wallet LOL. They are awesome. Set them to change settings or do tasker tasks and you can rewrite over them if you ever want to change anything. One of the best phone features I've ever used. That's why i was concerned about the magnets interfering with the NFC!
dcoy82 said:
I also have NFC stickers everywhere. have them when I walk in the front door of my house, one in my office at work, one in each vehicle, one in my wallet LOL. They are awesome. Set them to change settings or do tasker tasks and you can rewrite over them if you ever want to change anything. One of the best phone features I've ever used. That's why i was concerned about the magnets interfering with the NFC!
Click to expand...
Click to collapse
Where can I get / how do I 'program' these NFC Stickers?? This sounds awesome.
raing said:
Where can I get / how do I 'program' these NFC Stickers?? This sounds awesome.
Click to expand...
Click to collapse
A quick search came up with this: http://www.tagstand.com/
Seems like this could open up a whole line of fun options. Would love to hear how others have done it, though.
raing said:
Where can I get / how do I 'program' these NFC Stickers?? This sounds awesome.
Click to expand...
Click to collapse
www.tagstand.com to purchase the tags. Tell him DCoy82 sent you! The 30mm ultralight c circle NDEF formatted seem to be the only ones I've bought that work with the nexus so far.
Once you get them you can download program called NFC Task Launcher off the market to program them.
Sent from my A500 using Tapatalk
dcoy82 said:
www.tagstand.com to purchase the tags. Tell him DCoy82 sent you! The 30mm ultralight c circle NDEF formatted seem to be the only ones I've bought that work with the nexus so far.
Once you get them you can download program called NFC Task Launcher off the market to program them.
Sent from my A500 using Tapatalk
Click to expand...
Click to collapse
That is so awesome. This is my first phone with NFC so I'm barely starting to learn all the cool things that you can do with it. I tried Android Beam for the first time with my brother on Tuesday and it works great, though I wish you could beam other things such as pictures. By the way, the metal button does not interfere with NFC. I will let them know that you recommended me. Thank you!
If your interested in NFC, here's a few spots that got me started
http://androidforums.com/nexus-s/336155-what-do-you-use-nfc-tasker.html
http://www.readwriteweb.com/archives/weekend_project_make_your_own_nfc_tags.php
http://www.youtube.com/watch?v=LnqmyNEQPq0&feature=email&email=comment_reply_received
and the tags I bought were from here:
http://tagsfordroid.com/tags/Home.html
I got them cause i liked the having the android on them, i think they are a tiny bit less expensive elsewhere, and these are a little thicker than I'd like (like a puffy sticker, about the same thickness of a penny) but you can get many in other places.
by itself i'm not sure nfc task launcher does it for me, but in combination with tasker, it's ridiculous how much can be done....would still love to see what others have come up with.
I love those stickers with the Android! Thanks for the links. I will need to read up on it more. I am definitely interested. This is a lot more exciting stuff then what Google showed off at the I/O last year!
Thats a good idea. Being in IT, we have dead Hard Drives laying around that have awesome magnets in them. They're real slim. I bet I could superglue one to my nexus's battery cover for under the TPU case that would hold. They're thin so it might not screw with the case (but it might).
ejkeebler said:
I got them cause i liked the having the android on them, i think they are a tiny bit less expensive elsewhere, and these are a little thicker than I'd like (like a puffy sticker, about the same thickness of a penny) but you can get many in other places.
Click to expand...
Click to collapse
Yeah, it looks like it's $8 for 2. I just picked up 5 over at tagstand.com for the same price and found 10 for $13 over at http://buynfcstickers.com.
Hopefully you guys are all having good experience with the guy at tag stand. His customer service was great for me and I'll definatley be going back there in the future.
Oh and by the way, I got my new tetrax magnet set in today and not having any issues with the magnet at allowing necessary nor with the metal part sticking to the stock battery door. Only real issue so far is you have to slide it off just right or the battery door just pops off the nexus lol. Highly recommend though!
Sent from my A500 using Tapatalk
So I got a 10.1v model, not the standard 10.1 so pretty much any keyboard that would need the tab to slide into it is a no-go for me as the 10.1v is a few milliliters thicker.
So, unless you point me to anything else, this is the only keyboard I've encountered that I could use that is somewhat "tied" to the tablet :
http://www.befr.ebay.be/itm/270895288302?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
These are chinese products and I'm afraid of its quality, but I don't have a choice.
Did one of you guys purchased one of these ? Are they any good ?
I tried to find something but nothing...I could go with a "floating" bluetooth keyboard is the quality is better.
Thanks !
I used this one for while, until I returned it- no complaints. I just didn't need it.
http://www.amazon.com/Logitech-Tabl...8N7M/ref=sr_1_2?ie=UTF8&qid=1331081016&sr=8-2
Here's a quick look at it:
http://www.youtube.com/watch?v=-G-y4XecRYY&feature=youtube_gdata_player
Sent from my GT-P7510 using Tapatalk
I use the original Keyboard Dock since yesterday, ordered for 60 euros, and its awesome.. Dont use china rubbish!
Gesendet von meinem Desire HD mit Tapatalk
Samsung BKC-1B1DEBGXEG
I have the original Keyboard-Case combo, meaning this:
uh can't post links, so here is the name: Samsung BKC-1B1DEBGXEG Bluetooth keyboard ...
Go out and buy it, it's awesome!
Bluetooth connection is really easy, it has a fast wake up (and you can wake your device up by pressing any key [this even unlocks a non-protection screenlock] whoo!) and a humongous long battery duration.
Additionally, the build quality is very fine!
Rate it 6 of 5 stars
Got this case for $60 at Target. works great.
http://www.target.com/p/Samsung-Galaxy-Keyboard-Case/-/A-13738199
Thinking that this might be stupid / crazy..
Well, I dont know whether this is the best thread to post this.. Please let me know if there's any other thread that to which this post has to be moved..
So my crazy / stupid question is ---
Has anyone tried using the asus keyboard dock with the samsung galaxy tab ?
I think this may be something stupid becoz i am already thinking that the charging port for both the tabs are totally different and this may not work at all..
Still I am just curious to know whether this has been tried by anybody...
DannyBiker said:
So I got a 10.1v model, not the standard 10.1 so pretty much any keyboard that would need the tab to slide into it is a no-go for me as the 10.1v is a few milliliters thicker.
So, unless you point me to anything else, this is the only keyboard I've encountered that I could use that is somewhat "tied" to the tablet :
http://www.befr.ebay.be/itm/270895288302?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
These are chinese products and I'm afraid of its quality, but I don't have a choice.
Did one of you guys purchased one of these ? Are they any good ?
I tried to find something but nothing...I could go with a "floating" bluetooth keyboard is the quality is better.
Thanks !
Click to expand...
Click to collapse
To answer the OP's question... I just got one from eBay for $26 US. It works very well. For that much money, it's hard to beat. Your CDMA GT should fit in it just fine. Both the keybaord and the case are good quality, and can't be beat for that much money.
I do see one potential problem, however. When the case is latched closed the rubber (soft plastic) bracket that supports the base of the tablet comes into contact the screen and does exert a slight amount of pressure on the screen. Over time I am guessing that may damage the screen, but I'm just guessing - not sure about that at all.
Actually, I like the standard Samsung book case the best for the Galaxy Tab, and I don't always need the keyboard. So I'm going to take the little rubber keyboard out of this case and carry that separately. For $26, even that is a great buy.
This case/keyboard is sold under a bunch of brand names. Here is a bunch of reviews on Amazon, if you like to read them.
Hey Dan,
I've been using the Mobile Keyboard 6000 from Microsoft for a few weeks now.
The price is a bit overkill but sure worth the quality you get. And the number pad being detached from the letters is a nice feature if your on the go all the time, leaving the number pad behind is sometimes a plus. It is slightly bigger then the tablet itself but i don't mind since also use it for at home.
Ive been rocking the typing book cover for 2 days now, and so far i like it aside from a few things. But its not putting me off of it with its sleek tight fit.
The main issue is that there is no place to hold a stylus. (PS definitely worth the 20 bones to pick one up) and second, when it is being held in its typing arrangement, you cannot have anything plugged in besides the headphones. It does have a small slit so that the headphone jack doesn't have to be removed and put back in every time but they didn't do the same for the charger/accessory port.
Cheers!
KCHawkeye02 said:
Got this case for $60 at Target. works great.
http://www.target.com/p/Samsung-Galaxy-Keyboard-Case/-/A-13738199
Click to expand...
Click to collapse
I just picked the same one up at Target for $30 on clearance yesterday. Not a fan and I wouldn't recommend it. The cookie-sheet case feels flimsy and it doesn't protect the back of the tablet at all. The metal edges are kind of sharp (not knife sharp) but I have to be careful not to scratch the sides of my tab when putting it face down in this case. I also don't feel that it's very secured when closed (tablet face down). The keyboard works alright, it's very responsive, and it pairs easily and maintains it's connection, but some of the dedicated buttons don't work. I also would rather re-map some of the android keys such as the email button to open gmail. Maybe I can, but haven't looked into it. I guess it's ok if you're looking for a cheap bluetooth keyboard, but I don't trust it to protect my tablet. Idk how logitech justified this as a $100 case.
**edit** Been using this case with the blueputdroid app on my phone as a mouse and am loving it!
Check out my video review on the Spigen Slim Armor View:
https://wwwyoutube.com/watch?v=Kqc0gUDvueU
One thing I forgot to mention in the video is the auto sleep/wake function. This allows the screen to sleep just like with regular usage. When you wake the phone using the standby button the app will still be running.
I do not have enough posts to place an external link in a thread, so you will have to put a dot after the www in the link.
It would be great if someone could post the proper link.
Here you go, embedded it for you.
Very well done review! Nice detail and the video is super clear.
mmmmBACON said:
Here you go, embedded it for you.
Very well done review! Nice detail and the video is super clear.
Click to expand...
Click to collapse
Thanks, I actually just re-uploaded it with a little bit on the Application used.
You can see it here:
https://wwwyoutube.com/watch?v=Kqc0gUDvueU
Again sorry, it would be great if you could embed the new video.
Thanks
Updated my post with your new video.
mmmmBACON said:
Updated my post with your new video.
Click to expand...
Click to collapse
Thanks
Fantastic review. Does NFC sill work?
i can confirm nfc still works
is the app downloaded from the playstore or does spigen give you a link?
freezeburn said:
is the app downloaded from the playstore or does spigen give you a link?
Click to expand...
Click to collapse
the app is on the playstore its called slim view cover and spigen is releasing there own app on 05/01
Not to dig up too old a topic, but anyone have thoughts on the new app if it actually came out? I've been holding off buying this until the Spigen app released.
Sent from my Nexus 5 using Tapatalk
Their app really really sucks. I don't know why I thought it'd be good. Mostly all of their products suck I'm kinda happy with the case but still have issues with it. Under the window its still plastic not rubber so the plastic is resting right on the screen and the front cover is really thin and it bugs me just because I can press down on it and it will touch the screen. I don't have a screen protector on it so this is a concern. Its alright but I'll definitely be looking for a new case. Hard to hold while texting and the hinge is kinda crappy. They say 360° but I don't see how they got 360 when that means a complete rotation. It flips on its back and that's only 180°. But at least it doesn't cover the camera.
Sent from my Nexus 5 using Tapatalk
Again to dig up the old topic...
but...
... no reason to start a new thread as anyone looking to buy this case should be able to find all opinions in one place.
I bought this case have extremely mixed feelings.
1, it's a great case. It fits well. The buttons require a little extra effort to push, but no big deal. Supposedly the flip cover is removable, but I haven't seen how to do it without breaking the hinge. I'm sure it can be done, but I'm afraid to push things. Definitely it makes the phone bigger and heavier, but I don't see that as a bad thing as honestly the phone is a featherweight without a case. One minor issue with the physical build, is that the bottom edge of the view window brushes the screen of the phone while closed. Being plastic, I'm sure it wouldn't affect the glass screen. However, it does appear to be starting to leave a worn spot on the screen protector of my phone after only a few weeks. Something to definitely think of if you use plastic screen protectors.
2, the software is incredibly incredibly terrible. Whether you use 3rd party or the official Spigen app, they both bite the big one. I can't review each separately because I swapped between them constantly as new problems appeared, and forgot which one had which problems. But problems included: battery usage. phone calls not answering. phone calls answering themselves. can't connect bluetooth outgoing calls without opening flip cover. randomly lists previous calls as still ongoing. Additionally, though this isn't technically software, you have to be exceedingly careful not to even get near the proximity sensor while using the phone or it will trigger the app. Even with a 2 second proximity delay, I found it was very hard especially in landscape mode (such as taking pictures) to not accidentally trigger the sensor. Also, having the light sensor covered renders auto brightness non functional.
In the end, I still use the case. But without proper software support, I'm not sure it is worth $45. I ended up just putting widgets on my homescreens on the top 1/2 of the screen so I can see them with the flip cover closed. Answering the phone requires the ol' open the flip cover deal. That's better than the terrible software.
As far as protection... considering my Nexus 4 shattered from a drop onto dirt, despite having a Ringke Hybrid Fusion installed, I was looking for better protection. It appears this offers much better protection. It has already survived a 3 foot drop, initiated by a cranky cat, from a piano to a hardwood floor. Only time will tell, of course.
If you don't mind NOT having the software support... I feel this might just be the safest your Nexus 5 can be without placing it in a firesafe filled with expanding foam.
My buddy ordered this case a while ago, loved it, then hated it. Some of you were concerned about the view window touching the screen and potentially scratching it, well it did, for him at least. He now has a dull line across the middle of his screen. Almost the whole width. This only took 2 weeks of use. Just a little FYI for those interested in this case. You'll definitely want to use a screen protector with it.
Yeah my screen got deep scratches as well I can see them on the otherwise of my now installed screen protector. Its a nice case. Terrible window. And terrible app. The Galaxy S4 view armor had glass in the case itself. I bought this because I thought it did too.
Sent from my Nexus 5 using Tapatalk
lotherius said:
Again to dig up the old topic...
but...
... no reason to start a new thread as anyone looking to buy this case should be able to find all opinions in one place.
I bought this case have extremely mixed feelings.
1, it's a great case. It fits well. The buttons require a little extra effort to push, but no big deal. Supposedly the flip cover is removable, but I haven't seen how to do it without breaking the hinge. I'm sure it can be done, but I'm afraid to push things. Definitely it makes the phone bigger and heavier, but I don't see that as a bad thing as honestly the phone is a featherweight without a case. One minor issue with the physical build, is that the bottom edge of the view window brushes the screen of the phone while closed. Being plastic, I'm sure it wouldn't affect the glass screen. However, it does appear to be starting to leave a worn spot on the screen protector of my phone after only a few weeks. Something to definitely think of if you use plastic screen protectors.
2, the software is incredibly incredibly terrible. Whether you use 3rd party or the official Spigen app, they both bite the big one. I can't review each separately because I swapped between them constantly as new problems appeared, and forgot which one had which problems. But problems included: battery usage. phone calls not answering. phone calls answering themselves. can't connect bluetooth outgoing calls without opening flip cover. randomly lists previous calls as still ongoing. Additionally, though this isn't technically software, you have to be exceedingly careful not to even get near the proximity sensor while using the phone or it will trigger the app. Even with a 2 second proximity delay, I found it was very hard especially in landscape mode (such as taking pictures) to not accidentally trigger the sensor. Also, having the light sensor covered renders auto brightness non functional.
In the end, I still use the case. But without proper software support, I'm not sure it is worth $45. I ended up just putting widgets on my homescreens on the top 1/2 of the screen so I can see them with the flip cover closed. Answering the phone requires the ol' open the flip cover deal. That's better than the terrible software.
As far as protection... considering my Nexus 4 shattered from a drop onto dirt, despite having a Ringke Hybrid Fusion installed, I was looking for better protection. It appears this offers much better protection. It has already survived a 3 foot drop, initiated by a cranky cat, from a piano to a hardwood floor. Only time will tell, of course.
If you don't mind NOT having the software support... I feel this might just be the safest your Nexus 5 can be without placing it in a firesafe filled with expanding foam.
Click to expand...
Click to collapse
I have bombed spigen's email with complaints and they do not even bother to reply - it's such a shame that a company would make a great case, with promises of a functioning app and not follow through. My brother (note 3) and my gf (S4) BOTH bought this case on my recommendation and they love it bc it just works. I know it's different bc we dont have the magnets to trigger the innerworkings but sheesh just give us something relatively useful and it would be okay.
AceKingNYC said:
I have bombed spigen's email with complaints and they do not even bother to reply - it's such a shame that a company would make a great case, with promises of a functioning app and not follow through. My brother (note 3) and my gf (S4) BOTH bought this case on my recommendation and they love it bc it just works. I know it's different bc we dont have the magnets to trigger the innerworkings but sheesh just give us something relatively useful and it would be okay.
Click to expand...
Click to collapse
I'd be willing to give a little pass on the proximity sensor issues if those were the ONLY issues.
Sooo, spigen supplys the case but no app?
Or does anyone have more info then that, i ordered the case before i read up on it in here... and now i have it laying on my desk and i am not sure if i sould unpack it or not.
Without the app the window is pointless... and i could have ordered the slim armor instead and saved a few bucks ...
but i really liked the idea of having my screen protected by a secon layer of defense .. first one is obviously a screen foil ...
can anyone confirm that the app is really missing or am i just to stupid to use the search function?
Onecton said:
Sooo, spigen supplys the case but no app?
Or does anyone have more info then that, i ordered the case before i read up on it in here... and now i have it laying on my desk and i am not sure if i sould unpack it or not.
Without the app the window is pointless... and i could have ordered the slim armor instead and saved a few bucks ...
but i really liked the idea of having my screen protected by a secon layer of defense .. first one is obviously a screen foil ...
can anyone confirm that the app is really missing or am i just to stupid to use the search function?
Click to expand...
Click to collapse
The app is in the PlayStore. I just watched a video on it as I'm looking for a case for mine. They'll have a QR code on the instructions.
They do provide an app - but the app is terrible.
lotherius said:
They do provide an app - but the app is terrible.
Click to expand...
Click to collapse
Have they not updated it since release of this case?
The new S4 is marketed as to use with a keyboard, preferably the original samsung keyboard cover. In multiple reviews I've read you can use this cover in only one position. What I would like to know is if you can flip the keyboard completely over (360 degrees) as I would do intuitively when using it as a drawing block using the S Pen.
Wondering that too, I've pre-ordered so will get the keyboard cover free a few weeks after I get the device, so potentially it'll be unprotected during that time. I'll probably buy a case from Amazon (seen one for around £6) to see me through.
From what I saw in store, yes the keyboard can flip over behind the device.
Though I did find this interesting on the Tab S3 the little 1/3 flap behind the tablet secured to the back side of the device automatically, pretty well to hold it in place if you flipped the keyboard over behind the screen. The S4 did not, and there was a little extra slop in the case because of this. Course it might be the security device holding it down but its just something I noticed.
Well, yes and no. It can but backwards. It would have been nice if it was able to fold back with the tablet's back against the keyboard but it actually flips over so that the keys are at the bottom and the tablet is at the top. I'm unsure if this does damage to the keys but its not optimal.
Silly question but...
why not just use the otg cable, plug in your logitech module, and use your logitech keyboard and mouse? For the rare times I need a keyboard, that's what I do. Then the tablet is still easily used as you always would, flip, landscape, etc.
just a thought.
AsItLies said:
Silly question but...
why not just use the otg cable, plug in your logitech module, and use your logitech keyboard and mouse? For the rare times I need a keyboard, that's what I do. Then the tablet is still easily used as you always would, flip, landscape, etc.
just a thought.
Click to expand...
Click to collapse
That is a silly question because many folks will use this as a traditional portable tablet as well as an occassional desktop machine. When you are out and about with your expensive tablet, you need a case to protect it from accidents, but this case also needs to be convenient. Leather wallet / folio cases are ideal for this, but (most) obviously don't feature a keyboard. Given how slippery this tablet is, with its all glass rear, I'm guessing that accidents may be relatively frequent!
So the OPs original question is pefectly valid. What is the likely durability of the keyboard when folded right over and sat on the users lap, for example, playing Pokemon on a bus? Perhaps, maybe, the keyboard case is an expensive gimmick and a standard leather wallet case would be a much better option (if such a thing actually exists yet)? The real leather case on my Galaxy NotePro 12.2 has served me extremely well over the years.
Yemble said:
That is a silly question because many folks will use this as a traditional portable tablet as well as an occassional desktop machine. When you are out and about with your expensive tablet, you need a case to protect it from accidents, but this case also needs to be convenient. Leather wallet / folio cases are ideal for this, but obviously don't feature a keyboard. Given how slippery this tablet is, with its all glass rear, I'm guessing that accidents may be relatively frequent!
So the OPs original question is pefectly valid. What is the likely durability of the keyboard when folded right over and sat on the users lap, for example, playing Pokemon on a bus? Perhaps, maybe, the keyboard case is an expensive gimmick and a standard leather wallet case would be a much better option (if such a thing actually exists yet)? The leather case on my Galaxy NotePro 12.2 has served me extremely well over the years.
Click to expand...
Click to collapse
Who said the OP question wasn't valid? Who said not to use a case?
I'm merely suggesting an alternative for those of us who don't play "Pokemon on a bus", for example.
AsItLies said:
Who said the OP question wasn't valid? Who said not to use a case?
I'm merely suggesting an alternative for those of us who don't play "Pokemon on a bus", for example.
Click to expand...
Click to collapse
Personally, I never play Pokemon, however, my daughter does on her commute to work... and the Tab S4 is her tablet Cables and peripherals are totally impractical in this particular usage case. Everyone has different requirements. Anyway, her "free" keyboard case has just been delivered today, so I'll check it out tonight.
Yemble said:
Everyone has different requirements. .
Click to expand...
Click to collapse
thank you for making my point.
AsItLies said:
thank you for making my point.
Click to expand...
Click to collapse
You are welcome.
However, this is an interesting point for discussion, as to how folk plan to make use of their new investment. From what I can work out from my daughter, at home it will be docked into a Cable Matters USB-C hub and used to stream movies over an Ethernet LAN connection, to her HDMI TV, amongst numerous other things. At work, she will use it as a desktop with the keyboard case and a bluetooth mouse. I've already described her commute.
If it were mine, I'd be using it as a passenger navigation device, along with AlpineQuest and a full set of OSGB maps, which is what I currently do with my aging NotePro.
Now that I've received the keyboard case I can confirm that the case can be flipped in such a way that the keyboard faces up, into the rear of the case when using as a traditional tablet. In this mode, the footprint of the tablet extends along a long edge by 38mm, which is due to the way the "fold" works.
Alternatively, it can be flipped with the keyboard facing down, which only extends the footprint by 10mm along the same edge.
First impressions are that it adds a fair bit of weight to the tablet, mainly due to good build quality. The case is pretty solid, but not padded, so it may not be great at absorbing shocks, say from a drop! The keyboard is compact, but has a reasonable feel. Note, that the pen is essential for using the keyboard with DeX as there is no trackpad.
Is it worth the RRP? Err, no, however, as a pre-order "freebe", I've got no grounds to complain.
I have ordered a cheap Chinese imitation of the Note 10+ S View case which when genuine makes the AOD display down the right edge so it is visible through the cases clear edge. I am presuming the imitation case will not do this so am asking how can I? (of course I might get a nice surprise but I doubt it!).
I'm sure I read how to do that somewhere quite awhile ago but any DuckDuckGo-ing does not turn anything useful up.
Going through settings did not prove fruitful either.
Thanks for the heads up.
NoteTaker said:
I have ordered a cheap Chinese imitation of the Note 10+ S View case which when genuine makes the AOD display down the right edge so it is visible through the cases clear edge. I am presuming the imitation case will not do this so am asking how can I? (of course I might get a nice surprise but I doubt it!).
I'm sure I read how to do that somewhere quite awhile ago but any DuckDuckGo-ing does not turn anything useful up.
Going through settings did not prove fruitful either.
Thanks for the heads up.
Click to expand...
Click to collapse
Sorry, I have no idea, but I would be interested in your experience with this case, I was thinking of going down the same route, the official case being way too expensive.
kxdaorbit said:
Sorry, I have no idea, but I would be interested in your experience with this case, I was thinking of going down the same route, the official case being way too expensive.
Click to expand...
Click to collapse
I'm at the point where I think there are only 2 ways its going to happen, either the case has the appropriate bits that make it happen (which I doubt but you never know) or I have to trick the phone into thinking a real case is there.
The settings needed, in accessories it seems, to show the AOD down the right side, do not show up until the phone knows the case is there, from some quick searching it seems this is done with magnets and hall effect sensors to tell the phone the case is fitted, if the info I have stumbled upon is correct. I don't know why Samsung would not let people have the choice of the AOD down the side at any time if they would like instead of only with that case?
So if the case does not have these magnets I will play around until I get something with some small rare earth magnets and see what happens? It will be easy to glue them into the case if it works.
If none of the above works I may have to anti up for a real case....drat.
I like 'em but I'm not sure if I like 'em that much!
(it just struck me that I do not need to wait for the case to try some magnets and see what happens!).
EDIT: ok bad news I'm afraid - the AOD down the right side is NOT on the Note's screen, its on the clear part of the case which is a screen of sorts itself! The case has quite a few tricks and is probably why it costs so much. Bummer. Oh well, the cheap Chinese case will do for now while I agonize over whether to part with the dough for the real Sammy case! I may find that I don't like that type of case that I have to open all the time and I found out cheaply! That's about the only good outcome.
I'm not sure exactly which case you are referring to but the Samsung Clear view cases are just that, a clear part in the case that lets you see the screen.
So possibly some bad news, I have one of the LED cover cases, could be different but when I put the case on the phone it unlocks an app and wallpapers in the phone that let you control the case. In the LED Cover app, the case has its own serial number and strangely, the date I "registered" the case with the phone and there is a date when the software will expire in 3 years. So without access to the app, I think you're stuck.
willhemmens said:
I'm not sure exactly which case you are referring to but the Samsung Clear view cases are just that, a clear part in the case that lets you see the screen.
So possibly some bad news, I have one of the LED cover cases, could be different but when I put the case on the phone it unlocks an app and wallpapers in the phone that let you control the case. In the LED Cover app, the case has its own serial number and strangely, the date I "registered" the case with the phone and there is a date when the software will expire in 3 years. So without access to the app, I think you're stuck.
Click to expand...
Click to collapse
Yes without the case to tell the phone its there and activate the setting in accessories nothing will happen. I have since found out that the info about the case having a screen is wrong, don't trust Youtube! It is the Note's screen that does everything, after watching another couple of vids I could see the AOD display on the Note's screen briefly when they opened the case.
I wonder if any app developer would like to write a small app to make this happen whenever a person would like, that would cure the problem. I asked in AOD notify thread about this. I'm sure it would not be too hard at all. I think there would be a bit of demand especially from cheap case owners!
I should know by Wednesday at the latest if the cheap case tells the phone its there, it would be nice.
So the case arrived finally.
As expected it does not do anything, its just a case i.e. it does not tell the phone it is there. The special section in accessories is therefore not accessible. No AOD down the side.
The case itself is actually quite nice, seems well made, pretty good considering it was only 5 bucks.
Having said that I don't like the case when it is open, it makes holding the phone awkward so I most likely will not now ever buy the genuine Samsung case which will be the same in this attribute. I have heard this criticism about the sammy case.
I will use it for now to get my 5 bucks worth but will most likely take it off soon enough and put the sammy silicone case back on.
A shame because I like the look of the case on the phone closed and like the screen being protected but I feel that when open the case will likely be the cause of drops so it will have to go me thinks.
So a small update; There is an app in Play Store that will put an AOD style clock down the right side of the screen, right in the right spot for these cheap cases. It is called Edge Clock for S6 but works on most devices and on the Note 10+ too.
It at least makes use of the clear part of the case, kind of like you get with the genuine sammy case but it is just a clock and costs 4 bucks.
Seems to work quite well, different colors available etc. It is not an AOD but you have to run the app which makes the rest of the screen black while it runs the edge clock. I'm using it at home so my phone is unlocked which I find convenient, I get a kind of AOD display like I would of got with the real case so I'm kinda pleased with it.
I have gotten used to the case and have left it on, the initial dislike of when the case is open has passed and there have been no case induced drops, thankfully.
Hope this helps someone.
Couldn't you just have the AOD show the clock down the right side of the screen instead?
Sent from my SM-T860 using Tapatalk
For me, there is the AOD setting for the right-side of the screen. When you are choosing your "Clock Style" in AOD settings, scroll through the list all the way to the right, where there is a 'clock' logo, click it, and there should be 5 additional settings. The last one listed there is the right-side option.
https://imgur.com/a/vYPyrKA
Eddie_Brock said:
For me, there is the AOD setting for the right-side of the screen. When you are choosing your "Clock Style" in AOD settings, scroll through the list all the way to the right, where there is a 'clock' logo, click it, and there should be 5 additional settings. The last one listed there is the right-side option.
https://imgur.com/a/vYPyrKA
Click to expand...
Click to collapse
Well damn. I have 36 in mine and i don't have that one.
skryte said:
Well damn. I have 36 in mine and i don't have that one.
Click to expand...
Click to collapse
I'm on the N975W software, which is compatible with the N975U1, as I had that flashed for a couple weeks too. (Can't recall if the side-view was there or not, sorry)
Quote:
Originally Posted by skryte
Well damn. I have 36 in mine and i don't have that one.
Same here.
It would be nice if someone knew which APK it is with the AOD clock down the side so it could be downloaded and installed for us "not have's"!
The app I spoke of (S6 clock) is OK but it means when using it the phone is actually on and unlocked i.e. the app does not run on the lock screen.
Another Update.
I have found a free app that does what we were really looking for, AOD down the right side on the lock screen with clock, notifications, battery percentage etc!
HooRay!
It is called Always On Display Edge Lighting Super Amoled....yeah a mouthful but it works....except for 1 small problem but easily fixed me thinks.
For some reason it uses the proximity sensor and it switches the display OFF if the case is closed?? yeah I dunno why but I am going to drill a small hole in the case in the right spot to fix that PITA problem early tomorrow morning, bit late now.
So suck it sammy, I got my cheap chinese case AND my AOD for 9 bucks (case 5, first app 4 {now redundant}) second app free!
Hope I have helped someone.
Your selecting the wrong icon select the one that looks like the clock
No need for another app
Your selecting the wrong icon select the one that looks like the clock
No need for another app
It does not matter which clock I select the one I want is not there.
As reported by others as well. Some have it, some do not.
Possibly a region thing, who knows.
Your picking clockface you have it it comes stock
uninstall clockface and I bet it's there
Then you will see it where it Is
Then reinstall clockface
Don't uninstall all of good lock just clockface