Related
Cyanogenmod 11.0
Download:
http://dualhoki.vim.hu/bubor/dev/11.0/
http://rpi.bubor.hu/bubor/dev/11.0/
Changelog:
20131229: enable dynamic fsync, selinux is enforcing (break wifi)
20131230: add camerawrapper back, fix wifi
20131231: 2 phone app again, selinux enforcing
20140104: happy new year! Torch uses camera interface again (it fixes strobe crash), update CM 11, and patches to latest CM 11, selinux is permissive ( you can check settings -> about phone )
20140109: fix OTG storage mount (thanks karthik050782), remove google dialer (thanks tonyp)
20140118: only cm update
20140131: bln light fix.
20140222: cifs and nfs support
20140402: ksm (settings -> performance -> memory -> KSM) saves memory, cm update
20140601: remove gmaps
20140607: android 4.4.3
20140627: android 4.4.4
20140702: include skype fix ( you still need to run alsas
20140911: updated kernel for better battery life, thanks mara-
20150814: update cm (latest commit included )
20151224: update cyanogenmod, and gpu reserved memory lower to 192MB, xposed fix thanks BgiSock
20151230: revert gpu reserved to 256mb and skia fix ( open a gif crashed)
20160126: some tweak
20161001: end of life, no cyanogemod update released, I stop to build.
Install:
* Read this
* To safe start with stock, boot at least once to stock ( you can ignore this step, but you might have issues)
* Use my latest TWRP.
* Factory reset( you may skip this, but dont report bugs)
* Install zip
* Enjoy
Issues:
If you have issue, please repeat installing steps, but start with flash stock with odin, and boot once with stock.
No sound with skype, no bt call sound. Fix
Capture picture and video has fixed rotation.
Video recording may crash with default (only?) app
Gps works, readthis fix
Some app doesnt support our device, try older version, read this for list
Google play service crashes use this , or never from store
Tell me
addons:
Face unlock support: http://dualhoki.vim.hu/bubor/dev/faceunlock.zip
Swap internal external sd: http://dualhoki.vim.hu/bubor/dev/change-fstab.zip ( it replaces fstab.n1, it should work with all KK)
Old topic was: http://forum.xda-developers.com/showthread.php?t=2588304
XDA:DevDB Information
Cyanogenmod 11, ROM for the Samsung Captivate Glide
Contributors
bubor
Source Code: https://github.com/buborh/android_device_samsung_i927/tree/cm-11.0
XDA:DevDB Information
Cyanogenmod 11, ROM for the Samsung Captivate Glide
Contributors
bubor
Source Code: https://github.com/buborh/android_device_samsung_i927/tree/cm-11.0
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.1.x
Version Information
Status: Stable
Created 2014-07-02
Last Updated 2017-03-27
Reserved
Reserved
When you say Skype fix is included, what do we, the users, need to do to get it working automatically? Just run alsas command or we need to follow the guide with tasker? Also, YouTube is crashing, I suppose because of Tegra? Do you or anyone else knows which is the last working version?
mara- said:
When you say Skype fix is included, what do we, the users, need to do to get it working automatically? Just run alsas command or we need to follow the guide with tasker? Also, YouTube is crashing, I suppose because of Tegra? Do you or anyone else knows which is the last working version?
Click to expand...
Click to collapse
skype fix is what you download from zip, you need to run alsas, config tasker etc, but you dont install that zip from recovery.
Thanks for the info and for your effort, of course. To anyone interested, latest YouTube working for me is 5.7.41.
Hi, after connecting i927 to PC using USB cable, I cant see the green android icon to confirm that I want to use the phone as a disk drive. Is it normal or something wrong happened to my glide?
irekd said:
Hi, after connecting i927 to PC using USB cable, I cant see the green android icon to confirm that I want to use the phone as a disk drive. Is it normal or something wrong happened to my glide?
Click to expand...
Click to collapse
try to go settings -> storage click menu button or right top corner, usb computer connection.
Be sure usb debug is disabled ( default is disabled).
Because netflix closes when trying to open it? Any solution to this problem?
Sent from my SGH-I927 using XDA Premium 4 mobile app
Bubor, thank you once again for all your updates!
Everything is smooth as usual, but starting from 4.4.3 the battery in idle is draining way faster than before. The thing is simple: the phone never goes into deep sleep. Active time is 100% when charger is unplugged. Updating to 4.4.4 didn't fix the problem.
Further narrowed this issue: it comes with Google Play Services updated to 5.0.X. It just active all the time, even if not using CPU power at all. Restored it from backup to 4.4.52, now the phone sleeps again.
Makshow said:
Bubor, thank you once again for all your updates!
Everything is smooth as usual, but starting from 4.4.3 the battery in idle is draining way faster than before. The thing is simple: the phone never goes into deep sleep. Active time is 100% when charger is unplugged. Updating to 4.4.4 didn't fix the problem.
Further narrowed this issue: it comes with Google Play Services updated to 5.0.X. It just active all the time, even if not using CPU power at all. Restored it from backup to 4.4.52, now the phone sleeps again.
Click to expand...
Click to collapse
would you try gapps from here: http://forum.xda-developers.com/showthread.php?t=2397942 ?
Where did you found google play 5.0.x? https://play.google.com/store/apps/details?id=com.google.android.gms only 4.4.52
bubor said:
would you try gapps from here: http://forum.xda-developers.com/showthread.php?t=2397942 ?
Where did you found google play 5.0.x? https://play.google.com/store/apps/details?id=com.google.android.gms only 4.4.52
Click to expand...
Click to collapse
Yes, I tried to update Google play services from pa gapps before posting. (installed Play Services Update Module). Last update was july, 2 (as in the store), but the version number was showing 5.0.84.
Makshow said:
Yes, I tried to update Google play services from pa gapps before posting. (installed Play Services Update Module). Last update was july, 2 (as in the store), but the version number was showing 5.0.84.
Click to expand...
Click to collapse
but my rom includes an old one, it should work without installing gapps.
bubor said:
but my rom includes an old one, it should work without installing gapps.
Click to expand...
Click to collapse
I've got 4.8.20 and it still eats the battery quite fast. And I must say that I'm always trying to do things that should make the battery last longer:
1. I usualy use 2G (switch to 3G only when using internet)
2. I turn off wifi when not needed
3. I switch the phone in airplane mode for the night.
4. I use Greenify app for freezing apps which are set to work in background and I don't need them to work that way.
5. Turn on bluetooth and GPS only when needed.
Like @Makshow I also noticed that the phone isn't going into deep sleep almost at all.
irekd said:
Click to expand...
Click to collapse
what app this is?
bubor said:
what app this is?
Click to expand...
Click to collapse
AeroControl by @Blechd0se from Motorola Defy XDA thread. Very nice app.
Hello bubor please check netflix not fount thanks
Sent from my SGH-I927 using XDA Premium 4 mobile app
victorsalas said:
Hello bubor please check netflix not fount thanks
Sent from my SGH-I927 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
you should be more detailed.
bubor said:
but my rom includes an old one, it should work without installing gapps.
Click to expand...
Click to collapse
That google play services updated themselves to 5.0.82 before my manual update. And one shouldn't upgrade them manually from pa gapps, that update broke push messages for me.
Old gapps in this ROM has Services version 4.4.51-038, the -038 part means this version is for 480 DPI screen, while we have 240 DPI. Maybe, that was the reason why they updated themselves when I installed 4.4.3 ROM. Or maybe, they are just updating on some schedule...
I downloaded this file: Google Play Services 4.4.52 (1174655-034) from xda, and it's good so far - push is working, phone is sleeping. Will test some more.
Camera issue
Hi,
After a few days using 20140702 rom, I started to have problem with camera. It crashes all the time it's being run. Yeah, I know that @bubor wrote in OP that one of the issues is: "Video recording may crash with default (only?) app", but it's video recording, and I have crashes with camera. What's more strange is that the camera worked OK through a few days since installing the rom.
I've already cleared cache and data in the camera properties. I've even cleared cache and dalvik cache from TWRP level. And nothing. The camera still crashes. Any suggestions?
One more thing. During the last night my device rebooted. I wouldn't even know this, but I looked to uptime statistics of lately mentioned AeroControl app. Do you guys have such unexpected reboots?
---
Edit: the problem with camera has been resolved. It was just about full internal storage. After making some room, the camera started to work again.
I will keep this ROM updated, always help when I can, and open to suggestions that users may want implemented into the ROM. My goal is to keep the ROM Clean, Stable, with great performance without compromising battery life.
This ROM has had the following MODS
UNIFIED IS HERE! see post #2
Improved GPS
Ad blocking hosts file.
Super SU - FULL ROOT! Remember to grant andriod system root access on first boot!
Build prop mods
420 DPI - (sorry QHD users)
Thanks to Tantrums.
It does NOT flash recovery. So if you have TWRP 2.8.6.0 then it won't get replaced with OPPO recovery.
Removed Apps
Engineering mode
Google search
Google Drive
Hangouts
Google TTS
Chrome
Google mags
Google books
Glass lock screen
Facebook
Google music
IFly speech
Play games
More to come soon...
First of all download the ROM here and save it to your SD card
If you have stock recovery you will need to go into fastboot mode (hold power + vol up until the phone vibrates)
With you phone in fastboot boot and connected to USB (make sure you have installed oppo drivers) flash the TWRP img file.
Reboot the phone into recovery (Pwr + vol down)
In recovery select advanced wipe select everything except internal and external storage.
Then go to install and select the rom you have downloaded.
Enjoy.
I have found this to be a very stable/fast ROM with very few problems.
Updating from ColorOS 2.0.7i Beta you'll find following changes:-
CHANGE LOG
[System]
Added the options to format your SD card to ext4 format in Settings -> Storage -> Format USB storage device -> File system type -> ext4
Fixed the issue that some Chinese characters cannot be displayed correctly in chat or SMS, only show square box ---- Loo Kean Fai
Fixed the issue that sharing via Wi-Fi direct is missing in the sharing menu ---- Zafar Abbas Rizvi
[Launcher]
Fixed the issue that there is only one widget available for BeyondPod ---- Christian Dysthe
[Notifiaction Center]
Optimized the lockscreen notifications now notifications from all apps will be displayed on lockscreen interface unless you disable it manually ---- fezode
Fixed the issue that in notification center settings Display on status bar option is not working ---- 8monochrome
[Contacts]
Fixed the issue that contact search function is not case insensitive, now when you set the region to US or Other the contact search will become case insensitive ---- Giannis Lyrakos
Fixed the issue that when dialing the contacts app may stop working ---- Zafar Abbas Rizvi
[MaxxAudio]
Fixed the issue that when using third party music player such as power AMP, MaxxAudio sound effect is not applied unless you turn MaxxAudio off and on manually ---- zandru
[Camera]
Fixed the issue that when using Airdroid to scan QR code the camera only show black screen ---- Michel HUYNH
[Music]
Optimized the Music player, now the alphabetically scroll bar will also be available in current playlist interface ---- Bedsurfer
[Video]
Optimized the video player, fixed the issue that playing som MKV files are very laggy ---- After-sales Feedabck
[Strings]
Fixed a translation error in app encryption interface under Italian language ----Bedsurfer
Fixed the issue that under Vietnam and Indonesia language the MB is displayed as B ---- sunshean
[Settings]
Fixed the issue that Print options is missing in settings ---- Arjan v. L.
Maybe you can make an Aroma installer and add various launcher and various app pack
(don't know if it's possible)
Snorl4x said:
Maybe you can make an Aroma installer and add various launcher and various app pack
(don't know if it's possible)
Click to expand...
Click to collapse
It's already been done. - http://forum.xda-developers.com/find-7/development/rom-makulayos-rom-t2863295
My plan is to try and keep the ROM slim, fast and stable.
I know it's similar to Tantrums ROM, but I am new to ROM building and am taking one step at a time.
How is the battery life on this.. ?
And what will the mods do for your phone contra if the werent there.. ?
Nice to see a post here, sniperjoe. I love your approach. Thanks for removing google bloat. I had to uninstall them everytime i wanted to try colorOs! Good job!
Thanks
supernielsen said:
How is the battery life on this.. ?
And what will the mods do for your phone contra if the werent there.. ?
Click to expand...
Click to collapse
Battery life has improved a bit, but there is more free RAM available and less processes running in the background.
Here are the tweaks I have included.
Does the error notification (3 dots) is being repaired?
Im sorry if i am being annoying its just that i had this 2,0,3 beta from oppo, and i liked how it looked but it drained my battery like crazy.. ?
Can you please upload some screenshot.. ? were we can se ram usage and battery maybe.. ?
I really wanna try this but i just had som major problems on the normal 2.0.3 so i dont wanna do it right away
supernielsen said:
Im sorry if i am being annoying its just that i had this 2,0,3 beta from oppo, and i liked how it looked but it drained my battery like crazy.. ?
Can you please upload some screenshot.. ? were we can se ram usage and battery maybe.. ?
I really wanna try this but i just had som major problems on the normal 2.0.3 so i dont wanna do it right away
Click to expand...
Click to collapse
I have attached a screenshot.
blady-jack said:
Does the error notification (3 dots) is being repaired?
Click to expand...
Click to collapse
No it has not been repaired. It's not a bug.
The only way to fix this is to change your launcher.
If people want it I will create a goggle now launcher version.
sniper-joe said:
I have attached a screenshot.
Click to expand...
Click to collapse
Thank you for being awesome.. i will try this rom now and report back, i had some trouble with superSU the last time i tried rooting 2.0.3 but i will try this out and report back
Again thank you
supernielsen said:
Thank you for being awesome.. i will try this rom now and report back, i had some trouble with superSU the last time i tried rooting 2.0.3 but i will try this out and report back
Again thank you
Click to expand...
Click to collapse
This ROM is already rooted!
sniper-joe said:
This ROM is already rooted!
Click to expand...
Click to collapse
Yes i saw that, so i hope there isn't a problem here just did advance wipe and flashing it now i will be over in a sec..
EDIT:
It flashed perfect so far everything is fine no problems what so ever, however if i should point out one thing, it uses around 1gig of ram now, on my old 1.2.6i were i had deleted some stock apps it used about 790 - 810
So i used a bit more ram, i guess that the normal 2.0.3 uses even more..
supernielsen said:
Yes i saw that, so i hope there isn't a problem here just did advance wipe and flashing it now i will be over in a sec..
EDIT:
It flashed perfect so far everything is fine no problems what so ever, however if i should point out one thing, it uses around 1gig of ram now, on my old 1.2.6i were i had deleted some stock apps it used about 790 - 810
So i used a bit more ram, i guess that the normal 2.0.3 uses even more..
Click to expand...
Click to collapse
Yeah, oppo's apps are a bit bigger, I was going to take them out of the image, but then there is no point on having ColorOS if I do that.
I would recommend to all users to uninstall unused apps. (for example oppo music eats ram) You might need rom toolbox app to help you with this.
sniper-joe said:
Yeah, oppo's apps are a bit bigger, I was going to take them out of the image, but then there is no point on having ColorOS if I do that.
I would recommend to all users to uninstall unused apps. (for example oppo music eats ram) You might need rom toolbox app to help you with this.
Click to expand...
Click to collapse
Link2sd works waaaaay better in this case imho
suraj.das said:
Link2sd works waaaaay better in this case imho
Click to expand...
Click to collapse
Thanks, I have never heard of it. I will check it out..
You have ROM for OPPO Find 7 QHD? or will this work too
sniper! It would be great if you make a lite version for the 1.2.6 version!
i hate single layer launcher. how can i enable old double layer homescreen? i dont wan install another launcher because this silly things
thanks in advance
As always, use at your own risk!
First things first, this is made by Chinese for Chinese. With all its consequences. Base is 11 CM 4.4.4. The base is Rom for Dualsim. But runs on the MT7-L09 / L10.
It is important that you stick strictly to the installation instructions!
I now run the Rom since Thursday on and can say that it is suitable for everyday use. So far, since most of the CM of Rom. For battery life, is in the normal range.
The zip I have now revised again.
What has changed ?:
- China Apps away.
- L Android Google Keyboard v2 involved.
- Xperia Z2 Keyboard 6.4.A.1.24 Multi language involved.
- Gapps included.
- Build.prop DPI value 400 modified.
- MK44.4
Source
Advantage:
- Very many settings.
- Hide / Rename network operator.
- Runs smoothly and quickly.
- Xposed runs in the current version.
- Etc
Disadvantage:
- No fingerprint scanner
- No NFC.
- No Huawei camera, but the Google camera. Not as extensive.
- No bluetooth music streaming working
Prerequisite:
- Open bootloader
- Custom Recovery
- Rom
- SuperSU
Installation:
- Rom and SuperSU to the SD
- To Recovery
- Factory Reset
- In mounts and storage:
- Format / system
- Format / cache
- Format / data
- Format / data and / data / share (/ sdcard)
- Now flash the Rom
- Flash SuperSU
- Restart
Institution:
When you first start to follow the dialogue and the last window select the Xperia Google or keyboard. The Rom contains its own launcher with Drawer. If you want, you can still install the attached Xposed version.
What else is there to consider?
A backup in recovery you can do it, but does not help because it can indeed restore, but do not use it.
Here are a few pictures. But is already set up with Nova Launcher and Xposed modules.
XDADevDB Information
MK44.4
Contributors
Ry09iu
ROM OS Version: 4.4.4
Version Information
Status: Custom
Created:
2015-03-09
Thank you very much, i will try it out the next days.
Could you pls explain to me what you mean with this (ruhig in deutsch):
"A backup in recovery you can do it, but does not help because it can indeed restore, but do not use it."
I dont get it
Das Rom startet zwar, aber es wird alles beendet. Wenn es fertig ist hat man nur noch einen schwarzen Schirm.
---------------------------------------
Although the Rome starts, but it will all end. When it's done you have only a black screen.
Thank you for great ROM! A lot of settings, very good job! Highly recommend!
Only one question: is it posiible to set default incallui instead of as on attached picture?
I can not tell you.
new version??
Hi Fooox1 !
first post has been edited... it's a new version with some Google stuff included in the ROM... I downloaded everything yesterday to try this ROM, but today it's changed!! I will let you know my opinion... Thanks for posting
Rhanks m8. i'll test it now. I'll give you my feedback later.
leonardus_magnus said:
Hi Fooox1 !
first post has been edited... it's a new version with some Google stuff included in the ROM... I downloaded everything yesterday to try this ROM, but today it's changed!! I will let you know my opinion... Thanks for posting
Click to expand...
Click to collapse
Is the same Rom, I packed keyboards and gapps to Rom. This saves a few steps.
Thanks @Fooox1
now the rom already installed. one problem with a pop up message that google+ not successfully installed re install again. the problem solved using system app remover. Although I am unable to download google+ from play store due to compatibility issue. last thing my device is MT7-L10 so how to activate 2 sim cards.
thanks in advance.
My mistake, I have not taken over everything from gapps. Is corrected. Original Rome for the MT10, like all china custom Roms.
USSD services doesn work. Can someone check?
my feedback
Hi
after a couple of days, here's my feedback on this ROM...
I like it very much, works well and it's a big step ahead in comparison with stock EMUI rom. Contains a lot of settings, can install CM11 themes. The device is more solid, serious. EMUI in my opinion looks childish in comparison. I'll get back to stock ROM only when Huawei releases lollipop.... I have not tried yet Xposed, I'll try in the future and report about it....
Unfortunately there are a couple of fallbacks. It's up to you to decide whether you need it or not...
As already stated in first post:
-no fingerprint
-no FM radio
-no NFC
-google camera app is basic in comparison to huawei app
I also find out that:
-alarm not ringing when device is tuned off (stock ROM turns device on automatically one minute before and than rings the bell)
I confirm that:
USSD services does not work (as IgorX6 points out)
This ROM is great in my opinion and I strongly recommend to give it a try.
The real problem (the missing thing only) is fingerprint, one of the most important features of the device...
I wait for further developments...
Anybody can report in detail about Xposed under this ROM? which version works well? Themes issue is fixed? Which Xposed apps works ? etc THanks!
IgorX6 said:
Thank you for great ROM! A lot of settings, very good job! Highly recommend!
Only one question: is it posiible to set default incallui instead of as on attached picture?
Click to expand...
Click to collapse
Yes!!!
I found how to set standart incoming call shell:
go to Phone -> Settings -> Non intrusive -> remove a tick
Hola !
Before installing this rom, we must be on B127 ?
Yes or later, otherwise the kernel and baseband does not fit and it comes to bootloop.
artounet said:
Hola !
Before installing this rom, we must be on B127 ?
Click to expand...
Click to collapse
I had before B137 http://forum.xda-developers.com/mate-7/development/rom-erykinemt7-v1-0-0-mt7-l09-b137sp03-t3044695 , all works fine
Hi,
I also installed the adjusted ROM. Great job!
But I have encountered two problems:
1) Audio streaming via Bluetooth is still not working for me
2) I cannot change the DPI with "texdroider dpi" anymore --> but I could manually change the DPI (my best guess is, that there is problem with the access permissions)
PS:
I could activate Bluetooth audio streaming with the app "SoundAbout Pro" :laugh:
---> Ok, it seems, that this does not work everytime
Cheers
To 1, then, might not function properly.
At 2, why not just in the build.prop manually change?
@Fooox1
hi Fooox1,
any suggestions about the issue I reported (phone does not wake up to ring alarms, if turned off)?
How can we report to developer this? I have no idea, but I believe that it should not be too difficult to fix...
Can you just talk Report. My experience is, however, that there is no feedback.
http://bbs.anzhi.com/forum.php?mod=viewthread&tid=9580395&mobile=yes
Hey!
We've published our LineageOS 14.1 for everyone. You can found ROMS in Team Superluminal website.
Thanks and enjoy!
ekkilm said:
Hey!
We've published our LineageOS 14.1 for everyone. You can found ROMS in Team Superluminal website.
Thanks and enjoy!
Click to expand...
Click to collapse
Many thanks for your work :good:
We just recognize that the Safetynet compatibilyty is broken. But no worries. We’ll release update soon where that will be fixed.
And…
IR blaster will work too. ?
Stay tuned folks!
Good job
ekkilm said:
We just recognize that the Safetynet compatibilyty is broken. But no worries. We’ll release update soon where that will be fixed.
And…
IR blaster will work too.
Stay tuned folks!
Click to expand...
Click to collapse
Flashed and running well. :good:
I do not have VoLTE though. Hope that is added in the future. Everything else running smooth. Going to keep stay on this ROM for a bit.
Thanks for sharing!
ROM UPDATE
-Fixed SafetyNet compliancy
-Fixed IR Blaster
Edit.
Update is also available via OTA, so check your updaters!
Would it be possible to provide a ZIP to get IR working also for users of the "vanilla" LOS 14.1 weekly builds? Or will that not work due to missing kernel requirements?
Thanks for your rom!! Why you didnt create this post in the rom section?
What's the difference between this and stock LineageOS 14.1?
chemicalboyxda said:
Thanks for your rom!! Why you didnt create this post in the rom section?
Click to expand...
Click to collapse
Because we have our own forum in TS site. This is just a note/info that we've published our build
darkmuck said:
What's the difference between this and stock LineageOS 14.1?
Click to expand...
Click to collapse
Try and see
darkmuck said:
What's the difference between this and stock LineageOS 14.1?
Click to expand...
Click to collapse
Some minor tweaks.
For example:
- SafetyNet compliant by default (banking apps, etc.. works)
- Easy root install/uninstall in ROM Extra Settings
- IR Blaster works
- No cracking audio
- Prevent accidental wakeup works (also when waking w/ fingerprint)
- Browser that actually works by default (SWE Browser)
- Better snap camera by default (OmniRom snap)
- OTA
Probably forgot something..
I have a few questions about this ROM since I had installed a ROM from Lineage OS website (lineage-14.1-20170512-nightly-zl1-signed) yesterday and it has bugs in the most basic and essentials things... The most ridiculous bug is the phone app that doesn't show the call screen when I try to call someone or when I receive a call from someone, it only shows the notification that I missed my call... And my camera stopped working after I change the resolution to a higher one, that was currently available... I had managed to fix that after I installed an app called open camera from Play Store.
Besides that I loved the ROM it self since it was my first time trying a Lineage OS ROM, but before I try to flash the one that you have in your website I would like to know if there are any bugs related to the phone calls, alarm clock, music player and notifications...
Thanks in advance
rijrg4 said:
I have a few questions about this ROM since I had installed a ROM from Lineage OS website (lineage-14.1-20170512-nightly-zl1-signed) yesterday and it has bugs in the most basic and essentials things... The most ridiculous bug is the phone app that doesn't show the call screen when I try to call someone or when I receive a call from someone, it only shows the notification that I missed my call... And my camera stopped working after I change the resolution to a higher one, that was currently available... I had managed to fix that after I installed an app called open camera from Play Store.
Besides that I loved the ROM it self since it was my first time trying a Lineage OS ROM, but before I try to flash the one that you have in your website I would like to know if there are any bugs related to the phone calls, alarm clock, music player and notifications...
Thanks in advance
Click to expand...
Click to collapse
We haven't face those kind of issues in our rom Sounds pretty strange issues overall. Did you do full wipes before installation? What gapps? Any mods?
I recommended you to check our site, download the rom and READ install instructions before installation. Those are the basic steps for rom/gapps installation.
I installed today. The first problem that i have is that the root option of this rom didnt work right. I have to manually install supersu to get root.
Second the adaptative brigthness didnt work ok, like other 7.1 roms.
Third i installed in a x727 and the signal is weak. I installed the modem version of the 19s rom but didnt change. I selected LTE/WCDMA, the same.
And the last one and for me is a problem, its that CDLA headphones didnt work. I get the sound over the speaker of the phone.
Sorry for my english.
chemicalboyxda said:
I installed today. The first problem that i have is that the root option of this rom didnt work right. I have to manually install supersu to get root.
Second the adaptative brigthness didnt work ok, like other 7.1 roms.
Third i installed in a x727 and the signal is weak. I installed the modem version of the 19s rom but didnt change. I selected LTE/WCDMA, the same.
And the last one and for me is a problem, its that CDLA headphones didnt work. I get the sound over the speaker of the phone.
Sorry for my english.
Click to expand...
Click to collapse
No no no no... And no supersu.. read the FAQ. There is a guide how to enable root. It is addonSU
ekkilm said:
No no no no... And no supersu.. read the FAQ. There is a guide how you enable root. It is addonSU
Click to expand...
Click to collapse
?? Easy root (install/uninstall in ROM Extra Settings)
And the cdla??
chemicalboyxda said:
?? Easy root (install/uninstall in ROM Extra Settings)
And the cdla??
Click to expand...
Click to collapse
1. Still that is pretty easy, you just have to enable it.
2. Unfortunately we don't have CDLA headphone for now so we're unable to test it. But we might bought those so we can maybe fix it in the future.
ekkilm said:
1. Still that is pretty easy, you just have to enable it.
2. Unfortunately we don't have CDLA headphone for now so we're unable to test it. But we might bought those so we can maybe fix it in the future.
Click to expand...
Click to collapse
1. I did that but when the phone reboots root not present. I have to install manually.
2. Thanks!
chemicalboyxda said:
1. I did that but when the phone reboots root not present. I have to install manually.
2. Thanks!
Click to expand...
Click to collapse
So you did with this guide TS FAQ?
Hi all,
I thought it might be useful have a thread dedicated to talking ONLY about official Chinese Stock ROM.
I received my Z6 Pro with a very poor Global ROM, so quickly decided to try the true official ROM, hoping despite its weaknesses it would get far more frequent updates.
Just for reference, here is how I flashed:
Used as a guide the "UNBRICKING / FLASH FIRMWARE LENOVO Z6 PRO L78051" tutorial from boycracked
Official stock roms can be downloaded here: https://www.androidfilehost.com/?w=files&flid=303091 (CN 11.1.105 'android P' or CN 11.5.229 'Android Q' or even RoW 11.0.405 'Android P')
Required tools and drivers here : https://www.androidfilehost.com/?w=files&flid=303090
Some key steps:
Get phone ready (important) :
Gain access to developer options
Enable USB debugging
Enable unlocking Bootloader (it won't actually unlock it!)
Get computer ready (also important)
Install QDLoader HS-USB Driver 9008
Install latest version of QPST (2.7.474)
Flash with step in boycracked "unbricking Z6 pro" webpage or using this guide here https://forum.xda-developers.com/android/help/rom-lenovo-z6-pro-l78051-qpst-edl-t3947149
This are additional tips to avoid errors :
Copy/move flash rom file to bin subfolder of Qfil in 'program file' might help resolve errors
Get Qfil ready with recommended settings. Make sure “Erase all date before download” is NOT selected in configuration / firehose.
Connect USB cable
Reboot phone in EDL mode (adb command or press power + both volume buttons), COM port should appear in Qfil as "QDLoader 9008"
As soon as phone reached EDL mode and phone shows in Qfil quickly press Download. If for any reason it did not work, switch off phone again and reboot to EDL.
Ok so that will take you to official CN rom 11.1.105 which is a very stable android 9 rom released sometime in September.
Or CN 11.5.229, which is currently best choice and will keep being updated.
Now get rid of Chinese apps and install play store from the Chinese App Centre and that's it.
WARNING : DO NOT USE GOOGLEINSTALLER APK AND DON'T INSTALL GOOGLE ACCOUNT MANAGER
Googleinstaller.apk is not needed on CN roms, it will install apps that are not longer required. AND it will brick 11.5.x CN rom based phones!
Some users successfully moved to 11.5.x . Everything worked well until he used googleinstaller.apk
All is needed in CN Roms is playstore that is available in Zui App Center. Just in case make sure you don't have google account manager installed before applying OTA to Zui 11.5!
BE AWARE: There are several limitations or bugs in CN roms:
- (IF U-Touch is turned on) Can't use custom Launchers (Nova, Action...). Unfortunately they don't work and will freeze phone, make U-touch crash / no acces to recent apps. [fixed from CN 11.5.269]
- Backup to Google Drive does not work.
- Whatsapp notifications sometime don't appear until you run the app manually. (fix is simply to : (1) white list app in auto run, (2) lock it in app recent drawer, (3) exclude it from battery optimisation and (4) when reboot phone manually launch app so that it sits in ram).
- Some messaging apps' including Whatsapp's notifications won't generate ring or vibration :
FIX: WhatsApp no sound notification fix for CN roms:
- Get Notificon app from PlayStore (here: https://play.google.com/store/apps/details?id=notificon.gsy.com.notificon) to trigger sound each time selected apps generate a notification in the bar.
- Works for whatsapp, but make sure you disable the unnecessary notifications there like "Media Playback" otherwise Notificon will ring for no reason and you won't be able to listen to voice memos.
- (IF U-Touch is turned on) Morelocale app (which allows to use languages not included in the ROM) also totally crash ZUI... So rom has to be used in English. CONFIRMED WORKING FROM 11.5 CN ROMS !
How to use MoreLocale to get all your apps to use the language of your choice :
.Get the app from play store here: https://play.google.com/store/apps/details?id=jp.co.c_lis.ccl.morelocale
.Enable USB debugging from Developer Options and from a command prompt on PC, type this : adb shell pm grant jp.co.c_lis.ccl.morelocale android.permission.CHANGE_CONFIGURATION
.Everytime you reboot phone, you will need to go to morelocale app and pick the language of your choice!
So really as long as you are ok to fiddle around to tweak stock app and to use English language (or turn off U-touch). ZUI CN is the best official Rom option, if you need to keep bootloader locked.
Since it is untouched stock you will get OTAs to next upgrades:
11.5.269 (Android 10) released mid-January ; it is now a very stable beta release, I used it daily and it works great.
What I noticed:
- fix issues with morelocale and U-Touch.
- Improved photo quality and camera app layout
- Android Q!
- Dark Theme
- Custom launchers now work
- Still no google drive backup / Notificon required for whatsapp sound notifications.
There NOW is a full rom flashable Qfil file available to get directly to CN rom 11.5.229. As BL remains locked and system stock, OTAs will come as and when they are released.
Please report other issues / tips for improvements.
This will no longer be updated as I have now moved to RevengeOS : this is THE Custom rom alternative we were all waiting for. Works 100% great and Lucchetto who created it also managed to port the stock Camera app which means we don't loose the ability to access all cam lenses !
Thanks
Hmmm... Actually Utouch seem to be working great with 11.1.105.
No wifi problem either.
BUT still can't set a language other than English and kind of forced to stick to ZUI launcher.
So as of now phone with Chinese ROM is enjoyable and very powerful, despite room for improvement.
As for ZUK Z2 Pro in the past, official Chinese ROM are far better than any 'global' release... But need some tuning.
PS: I love uTouch
My phone is with CN 11.0.575 and parched with the ZaZz version (The .bat 00_flashrom.bat anywhere), i already have TWRP Recovery and now is rooted with Magisk. I CAN HELP WITH AL THE PROBLEMS OF YOUR SOFTWARE, But, now i want to install the ROW Secure 11.0.284 version, i cant, i dont know if is the version of my QFIL, the drivers, but the process just arribe to system_3.img and stay every time that ypu want. I dont know, but i want to try with that ROM. I just can with the CN 11.0.575 ROM, i areally want to try with ROW, im using QFIL 2.0.1.9 .
Can't help you this thread is only to discuss stock Chinese Rom.
does the chinese version have any problems with the notifications?
Row 11.0.284, no problem with gesture, everything for me working Fine, I root with magisk and I don't lose the ota updates hehe :3 ... One thing I miss on every ROM (include chineses) is exfat support for microsd card :/
hehk1234 said:
Row 11.0.284, no problem with gesture, everything for me working Fine, I root with magisk and I don't lose the ota updates hehe :3 ... One thing I miss on every ROM (include chineses) is exfat support for microsd card :/
Click to expand...
Click to collapse
Please read the topic title
Poda_jj said:
does the chinese version have any problems with the notifications?
Click to expand...
Click to collapse
I guess this is the main issue with Chinese ROM... Whatsapp notifications don't work well.
Still running tests, but there are like 4 places to watch for to help with notifications:
- permissions
- notifications from the app setup screen
- Auto start
- Battery optimisation
....
And probably more.
Without notification how can you use a phone ?
mburaky06 said:
Without notification how can you use a phone ?
Click to expand...
Click to collapse
Notifications are fine!
It is only WhatsApp that has issues is limitations.
benjieb said:
Notifications are fine!
It is only WhatsApp that has issues is limitations.
Click to expand...
Click to collapse
Is there a need for unlocking bootloader to flash stock rom ?
mburaky06 said:
Is there a need for unlocking bootloader to flash stock rom ?
Click to expand...
Click to collapse
Nope,
read my mini tutorial further up. You need to "enable unlocking" in developer options, but you won't actually unlock it! Hence you stay stock and get OTA !
benjieb said:
Nope,
read my mini tutorial further up. You need to "enable unlocking" in developer options, but you won't actually unlock it! Hence you stay stock and get OTA !
Click to expand...
Click to collapse
Okay. Everything is just like u said got two ota updates. Notifications are not stable but not a big deal. But my mobile signal rate is too low dont know why. Any info about it? Thank you
My signal is fine. Have you checked that Z6 Pro have the bands used in your country and/or by your provider?
if i flash the cn rom... how do i disable chinese apps and install google play services?
x-geo said:
if i flash the cn rom... how do i disable chinese apps and install google play services?
Click to expand...
Click to collapse
Disabling most Chinese apps is very easy. Either from Zui home page or go to settings / apps and you can uninstall or disable what you want.
Installing google play : I did that through the app centre (this is the chinese equivalent of google play) search for google play and you're done.
Are notifications fine out of the box in last cn version or you've to set some permissions?
Sent from my vivo X20Plus A using Tapatalk
Does anybody know ???
Paketname: TWRP-LENOVO_Z6PRO-DE-wzsx150 -fastboot.7z
Zeit bauen: 2019.09.22
Anwendbare Modelle: Lenovo Z6pro
Kompilation: wzsx150
Mikro-Blog - Konto: wzsx150
Teamname: LR.Team
Can somebody dowload that TWRP ???
kanschelskes said:
Paketname: TWRP-LENOVO_Z6PRO-DE-wzsx150 -fastboot.7z
Zeit bauen: 2019.09.22
Anwendbare Modelle: Lenovo Z6pro
Kompilation: wzsx150
Mikro-Blog - Konto: wzsx150
Teamname: LR.Team
Can somebody dowload that TWRP ???
Click to expand...
Click to collapse
Has this anything to do with the subject of this thread?
andy88de said:
Are notifications fine out of the box in last cn version or you've to set some permissions?
Click to expand...
Click to collapse
See previous posts about that.
To summarize, most notifications like calls, sms, emails... Work fine.
I had more trouble with whatsapp. Needs to allow in autostart, exclude from battery optimization, allow notifications... And to be safe, launch it manually after phone reboot.