Related
Is there a way to cause a hardware problem of some sort so I could use my warranty and get my phone exchanged?
Put it in a microwave oven for a couple of seconds??
With respect, if you want to exchange your device, isn't it because of hardware failure? If it's software, shouldn't a hard reset fix your problems?
Well, it's because of a few cosmetic scratches (as well as one on the screen) that I want the phone exchanged because I've finally ordered a case and screen protectors. Except... they didn't arrive before I dropped the phone ;_;
a 9V battery across the battery terminals probably isn't healthy for the phone...
jasonjoo said:
Well, it's because of a few cosmetic scratches (as well as one on the screen) that I want the phone exchanged because I've finally ordered a case and screen protectors. Except... they didn't arrive before I dropped the phone ;_;
Click to expand...
Click to collapse
I might suggest taking a hammer to the interface between your keyboard and chair.
I know that if you ruin the top right pin on the USB port the phone won't charge anymore. I'd say that warrants a warranty. Don't you have to pay like $70 now to get a replacement, or are you going to wait 2 weeks?
I'm remembering that everyone was griping about the cost of the TP2 when it was first available... and now you want to exchange a fully working phone???
stop causing the rest of us to pay higher prices.
Instead of exchanging the phone, why not pay to have the scratched pieces replaced... using your money instead?
jasonjoo said:
Well, it's because of a few cosmetic scratches (as well as one on the screen) that I want the phone exchanged because I've finally ordered a case and screen protectors. Except... they didn't arrive before I dropped the phone ;_;
Click to expand...
Click to collapse
Tough luck. But that is not what warranty protects it from. Had you wanted protection from that sort of accident you should have bought the plan through your cell phone provider. Falsifying hardware failures is not only wrong, it jacks up the price, and increases headaches for people who have ACTUAL warranty issues!
So goodluck with the attempt to wreck your phone, I'll laugh when I read the post about "HELP I MICROWAVED MY PHONE AND HTC WONT WARRANTY IT, HOW CAN I FIX IT?!?!?!"
Seriously, wtf.. it's dumbasses like you that cause this phone to be $600 in the first place.
Okay, this is a "sure fire" way of causing a hardware failure. You have to follow these steps in order or it will not work.
1. Find a high-voltage source. This may be your local hydro-electric transmission tower or the third-rail in any subway system.
2. Hold phone in one hand.
3. Use other hand to touch the high-voltage source.
And after some smoke and mirrors, your family/people in your last will and testament will be forever thankful for the new phone.
I am SO determined my new phone would stay looking new as long as possible that I've had my BNIB TP2 sat in it's box for 5 days now, waiting for the invisiSHIELD full bodykit to arrive from the USA - which arrived today! \o/ ... and it turned out I'd ordered the wrong one! /o\
... so now I have to wait another 10 days awaiting the correct version... *sighs*
However, I really REALLY want this phone to STAY looking as good as new, so I wait & carry on using my Kaiser in the meantime... by the time the new kit arrives hopefully WinMo 6.5 will be out too so it's no biggie waiting 10 days: I expect to get 2+ years out of it after all.
Joe
P.S. I've taken it out 3 time so far & stroked it *sob* then carefully put it back in it's little plastic bag. Soon My Preshusss..... soon.....
Joe Pinball said:
I am SO determined my new phone would stay looking new as long as possible that I've had my BNIB TP2 sat in it's box for 5 days now, waiting for the invisiSHIELD full bodykit to arrive from the USA - which arrived today! \o/ ... and it turned out I'd ordered the wrong one! /o\
... so now I have to wait another 10 days awaiting the correct version... *sighs*
However, I really REALLY want this phone to STAY looking as good as new, so I wait & carry on using my Kaiser in the meantime... by the time the new kit arrives hopefully WinMo 6.5 will be out too so it's no biggie waiting 10 days: I expect to get 2+ years out of it after all.
Joe
P.S. I've taken it out 3 time so far & stroked it *sob* then carefully put it back in it's little plastic bag. Soon My Preshusss..... soon.....
Click to expand...
Click to collapse
wow dude are u serious?? Its a fuking phone not a damn pricless piece of art... Jeez
omaralt said:
wow dude are u serious?? Its a fuking phone not a damn pricless piece of art... Jeez
Click to expand...
Click to collapse
Understood his dilemma. The phone is expensive, and I would like it to stay as new as possible. Until now, I still don;t care to use a cloth to wipe the screen, even thou i had screen protector on it. sigh
quid246 said:
Okay, this is a "sure fire" way of causing a hardware failure. You have to follow these steps in order or it will not work.
1. Find a high-voltage source. This may be your local hydro-electric transmission tower or the third-rail in any subway system.
2. Hold phone in one hand.
3. Use other hand to touch the high-voltage source.
And after some smoke and mirrors, your family/people in your last will and testament will be forever thankful for the new phone.
Click to expand...
Click to collapse
I've taken, my phone, and put it in the engine compartment of my car with a sparkplug wire off, and let, the voltage from the coil, nearly 50,000 volts, arc through the phone with nothing.
as for putting it in the microwave, the first thing to go, will be htte LCD display, and the thin touch film over it, and I'm sure broken screens are not covered..... also tried
just take, a very small screw driver or a tweezer, and scrap off a diode, or resistor, or whatever
I'm sure rectal insertion would kill it.
its been my experience with WM phones & TmoUS that if you tell them there's a problem & that it continues to persist even after a Hard Reset, they'll warranty exchange it. So... just makes something up... I doubt they actually try to verify all claims.
if your doing it over the phone
Just keep telling them that the phone stops when it says t-mobile or whatever
, yes them with all there directions for hard resets, and keep telling them it freezes,at the boot up, they'll swap it
A pristine phone is not what makes you cool, hth.
Well, within 6 months there is a new phone out that I lust after so I want an excuse/justification to get the new one. That's a good reason to let it deteriorate quickly.
Leo here I come
When I saw the plastic inserts on the metal band Moto 360, I got excited because I thought Moto had finally rectified the issue with the potential cracking back. I was hoping/assuming that it would be a softer plastic insert to absorb some of the pressure put on it by the metal band. Well, if you take a look at the attached pics, you will see that, unfortunately, I was wrong. The plastic is VERY brittle. I was wearing the watch when I tilted my wrist reaching for something and heard a snap/pop sound. I thought for sure the back just cracked, but it had not. Instead the part of the plastic insert that sits between the band and the back completely snapped off. Now, (it's kind of hard to tell but) it looks like the metal is now pushing up against the back. It's obvious that metal beats plastic as evidenced by the fate of the insert. So I'd imagine it's only a very short matter of time before the back cracks. Oh, and this happened LESS THAN 24 HOURS after purchasing the watch. I'm wondering if maybe the insert may have been slightly cracked to begin with because the other one seems fine. Also, this is already my SECOND metal 360, as the first had what was either a tiny bubble or some sort of reflective debris under the screen.
Has anybody else had this issue with the inserts? I'm wondering if I should exchange it, or just get a refund and wait for the 2nd gen Moto 360. Other than this issue, I REALLY LOVE this watch, which is why I'm struggling with returning it.
FULL DISCLOSURE: I do have tiny, girly-man wrists, and I wear the watch somewhat loose as I like to wear my watches lower on my wrist (closer to my hand, pretty much resting on it).
Pictures:
1) Pic of broken insert
2) Pic of other side still intact
3) Profile shot to see the difference when hanging. Can see the broken side resting against the back.
charesa39 said:
When I saw the plastic inserts on the metal band Moto 360, I got excited because I thought Moto had finally rectified the issue with the potential cracking back. I was hoping/assuming that it would be a softer plastic insert to absorb some of the pressure put on it by the metal band. Well, if you take a look at the attached pics, you will see that, unfortunately, I was wrong. The plastic is VERY brittle. I was wearing the watch when I tilted my wrist reaching for something and heard a snap/pop sound. I thought for sure the back just cracked, but it had not. Instead the part of the plastic insert that sits between the band and the back completely snapped off. Now, (it's kind of hard to tell but) it looks like the metal is now pushing up against the back. It's obvious that metal beats plastic as evidenced by the fate of the insert. So I'd imagine it's only a very short matter of time before the back cracks. Oh, and this happened LESS THAN 24 HOURS after purchasing the watch. I'm wondering if maybe the insert may have been slightly cracked to begin with because the other one seems fine. Also, this is already my SECOND metal 360, as the first had what was either a tiny bubble or some sort of reflective debris under the screen.
Has anybody else had this issue with the inserts? I'm wondering if I should exchange it, or just get a refund and wait for the 2nd gen Moto 360. Other than this issue, I REALLY LOVE this watch, which is why I'm struggling with returning it.
FULL DISCLOSURE: I do have tiny, girly-man wrists, and I wear the watch somewhat loose as I like to wear my watches lower on my wrist (closer to my hand, pretty much resting on it).
Pictures:
1) Pic of broken insert
2) Pic of other side still intact
3) Profile shot to see the difference when hanging. Can see the broken side resting against the back.
Click to expand...
Click to collapse
Wow... Just wow is all I have to say.
Premium materials. Hyped for ever.
Think I'm just gonna stick with my leather for now and remember this going forward.
charesa39 said:
When I saw the plastic inserts on the metal band Moto 360, I got excited because I thought Moto had finally rectified the issue with the potential cracking back. I was hoping/assuming that it would be a softer plastic insert to absorb some of the pressure put on it by the metal band. Well, if you take a look at the attached pics, you will see that, unfortunately, I was wrong. The plastic is VERY brittle. I was wearing the watch when I tilted my wrist reaching for something and heard a snap/pop sound. I thought for sure the back just cracked, but it had not. Instead the part of the plastic insert that sits between the band and the back completely snapped off. Now, (it's kind of hard to tell but) it looks like the metal is now pushing up against the back. It's obvious that metal beats plastic as evidenced by the fate of the insert. So I'd imagine it's only a very short matter of time before the back cracks. Oh, and this happened LESS THAN 24 HOURS after purchasing the watch. I'm wondering if maybe the insert may have been slightly cracked to begin with because the other one seems fine. Also, this is already my SECOND metal 360, as the first had what was either a tiny bubble or some sort of reflective debris under the screen.
Has anybody else had this issue with the inserts? I'm wondering if I should exchange it, or just get a refund and wait for the 2nd gen Moto 360. Other than this issue, I REALLY LOVE this watch, which is why I'm struggling with returning it.
FULL DISCLOSURE: I do have tiny, girly-man wrists, and I wear the watch somewhat loose as I like to wear my watches lower on my wrist (closer to my hand, pretty much resting on it).
Pictures:
1) Pic of broken insert
2) Pic of other side still intact
3) Profile shot to see the difference when hanging. Can see the broken side resting against the back.
Click to expand...
Click to collapse
Mine just snapped, same thing. No way in * am i going to send this back and wait four months for a replacement that will most likely have dead pixels or other issues after the h**l ive been through getting this one shipped to me from them the first time and all the cracked backs for other people with OEM bands that are leather. If they refuse to send me replacement plastic links at no cost free expedited shipping I'm going to file every consumer fraud report on them that exists after the bs they are putting me and others through with the nexus 6.
The content should speak for itself
Ryan: Hi, my name is Ryan. How may I help you?
Gary: Hi My name is Gary, My email is ************@gmail.com, I just spoke to a representative Eddie over at moto maker online chat support, reference number 141129-015287. I have a 22mm natural steel moto360(Serial #P0******GX) that I have had for less then a week. Before this version I had the horween leather version bought from best buy, I returned the leather version within 14 days because the back of the watch cracked from the leather strap putting pressure on the plastic back(Sic design flaw). I ordered the 22mm natural steel band version from you directly online at your site with moto care insurance. Today the plastic link that you added between the 22mm steel watch band and the watch body to correct said design flaw snapped on one side -- this IS a user serviceable part, when you purchase the 22mm natural steel watch band for $80 seperately it comes with this tiny plastic peice, and users are able to get new metal links sent to them when requested as well which are much harder to put on yet are STILL user serviceable parts. Well, Eddie insured me I could have a replacement plastic link protector peice sent to me and gave me this number to call to speak to the moto360 specialists: 866-320-4780 Well I called them, I spoke to jose who told me that I would have to return the watch and wait two weeks for a full replacement, this is absurd, there's not a damn thing wrong with the watch or watch band, I demanded to speak to the manager, and Jose hung up on me. I'm not returning my watch and going without it for two weeks after the hell ive been through just to get a tiny plastic peice worth less than a penny -- if that's the case I'll just wait until the back of the watch completely snaps or smash it myself because you guys created a faulty design and then motorola is out more money not me as they will have to replace it no questions asked. If there's some other resolution here I would be glad to hear about it as would everyone else with this problem over on xda and the other android forums who I will be reporting to with our chat transcript, any support is appreciated.
Gary: See this link: http://forum.xda-developers.com/mot...nsert-metal-banded-360s-t2953580#post57120023
Communication with the Oracle RightNow CX Cloud Service Chat service has been lost. Please wait while attempts are made to restore the connection.
Disconnection in 240 seconds.
Connection resumed.
Ryan: This is for repair?
Gary: Yes.
Ryan: I do apologize for that.
Ryan: Let me transfer you to right department, is that okay?
Gary: It seems like alot of time and trouble to go through to get the tiny plastic user servicable part.. you know? Thank you. That would be very appreciated.
Ryan has disconnected.
Mak: Hi, my name is Mak. How may I help you?
Gary: Hi Mak, I'm not sure if you can, I hope so! Are you able to see the previous chat transcripts?
Gary: Let me say ahead of time I'm in a real bad mood after dealing with some of the phone support guys at moto, so please don't take it personally.
Mak: I understand you with that.
Mak: Yes I can see the previous chat transcript.
Mak: Please give me a minute to read it first.
Gary: If this isn't a user servicable part you guys can send out -- you really have to make it one.
Gary: the watch band is supposed to be user changable.. it's just a tiny plastic peice that slips over the band when you attach the band.
Gary: They added it to prevent the problems that were happening with the backs cracking on the leather versions.
Mak: Will this for the Moto 360 device?
Gary: Yeah exactly. the 22mm natural steel moto360
Gary: In this link there are photos of the peice: http://forum.xda-developers.com/mot...nsert-metal-banded-360s-t2953580#post57120023
Gary: there's alot of people that are popping up on the various android forums that are having this issue.
Mak: In this case sir since you have reached the Technical support for Android phones, I have to give you a call and transfer you over to our Moto 360 department.
Gary: Would it be possible to get the number for the moto360 specialists? was it the correct number before?
Gary: It seems silly that they want to spend the time and employee resources instead of sending me the tiny plastic peice that's worth less then a penny
Gary: they don't have them to spare with the nexus 6 stuff going on
Mak: Sure. Please give me one minute.
Mak: Here is the number that you can call 8663204780.
Gary: That's a bummer, that's the number I called previously..
Gary: Is there a way you could escalate this to some one in charge of moto360 returns and repairs? they really need to be made aware of this issue
Gary: if we are allowed to change watch bands ourselves.. and this plastic peice is a part of the band.. it seems it should be a user servicable part
Mak: Yes. I will and I will let our higher management know about this as well.
Gary: Thank You Mak.
Gary: I really appreciate that
Mak: You are very much welcome.
Mak: Will there be anything else?
Gary: I'll try again with the moto360 phone support. Have a good holiday season mak
Mak: Happy holiday as well Sir.
---------- Post added at 06:44 PM ---------- Previous post was at 06:41 PM ----------
So i'm just going to wear it until the back snaps, then take a sledgehammer to it and send it back to them in peices in an envelope for return.
I'll continue to do this until they fix the user support problems, eventually they will get tired of me costing them money on watches.
I just want to add, that after being passed around alot more online chat support people who were "in the wrong department to assist me" and being hung up on a few times I finally found my way to the moto360 forum on motorola.com's official website.
I posted my problem there and I was actually able to get some real help from people that knew what I was talking about, and it seems like this issue is going to be passed up the food chain so that hopefully I and others in the future who break this plastic protector peice do not have to do a full rma return procedure.
Nothing has come of it yet, but it sounds promising, I will update when further progress is made.
garymaurizi said:
I just want to add, that after being passed around alot more online chat support people who were "in the wrong department to assist me" and being hung up on a few times I finally found my way to the moto360 forum on motorola.com's official website.
I posted my problem there and I was actually able to get some real help from people that knew what I was talking about, and it seems like this issue is going to be passed up the food chain so that hopefully I and others in the future who break this plastic protector peice do not have to do a full rma return procedure.
Nothing has come of it yet, but it sounds promising, I will update when further progress is made.
Click to expand...
Click to collapse
Yeah. I decided to return mine and not even bother with an exchange. I don't want to have to worry about RMAing it every month for a cracked back, especially since it appears to be a lottery on whether you get a good unit or not. Since I LOVED having an Android Wear device, I knew I'd miss having one. So I lucked out and picked up a LG G Watch for $80 + a $50 Google Play credit from Best Buy yesterday (so probably cost me like $40 after selling the code for like $40). Yeah, it's not as pretty as the Moto 360 is, but that price was too good to pass up. Hopefully, it should get me by until they fix the issue or come out with the 2nd gen 360. Having notifications at a glance is so much more convenient than I ever thought it would be. Good luck to you and everyone waiting for them to rectify the issue. I really do hope Moto get their act together for you guys.
My watch had the black plastic piece break as well after two weeks. Of course it happened after the two week best buy return period. The black piece is still installed, just had a few pieces break off. I figure I'll wait a week or two for a Motorola response.
I'm on my 2nd watch. Bought it from BestBuy and got the 2 year replacement too. They took the first one back because of the cracked back. It was a full semicircle from each side of the band. I googled a bit and found Moto saying its a warranty issue for cracking backs. I'm extra cautious now with mine. Even if its not an issue and no one ever sees it, I know the crack is there. I have about 21 months still of replacements from BestBuy. My bet is that a new model will be out within 2 years and eventually I'll get store credit towards a new one.
One of my little black spacers just cracked too. Only been wearing the watch since Christmas. Any updates on the people just trying to get this one piece replaced?
Ill have to try to contact moto when I get off of work today.
I received my 360 for Christmas from my wife (silver metal band)...the day after Christmas, I felt something poking my wrist while wearing the watch...one of the black spacers was cracked and had a sharp point on it.
I had tried going the route of chat help and calling the support number...
Every rep I spoke to (about 5) was telling me that they do not make these spacers for individual replacement. I would have to send my watch in to have it repaired...or I could purchase a new band and it would come with the new spacers. I told them that this was absolutely unacceptable to me.
...I went to Twitter and asked for help with this issue...that afternoon I received a response from them asking for my name and information. I was told that someone would be in touch with me soon (which I was expecting the run around again). To my surprise, when I came home from work the next day...there was a fedex envelope for me containing 4 spacers.
Needless to say, the sharp piece ended up falling off but the band still feels pretty solid. I have opted to hold off on replacing it until I actually need one, but I'm grateful that they were able to replace it (and send me a few extras just in case).
Help is out there...just have to go to a public audience to get it
I have questions about the help you get from the Moto chat...one rep was telling me that they do not use any plastic on the metal band version, that I must have purchased a different device or a counterfeit and that I would have to go to a local jeweler for help fixing my watch.
agentaaron said:
I received my 360 for Christmas from my wife (silver metal band)...the day after Christmas, I felt something poking my wrist while wearing the watch...one of the black spacers was cracked and had a sharp point on it.
I had tried going the route of chat help and calling the support number...
Every rep I spoke to (about 5) was telling me that they do not make these spacers for individual replacement. I would have to send my watch in to have it repaired...or I could purchase a new band and it would come with the new spacers. I told them that this was absolutely unacceptable to me.
...I went to Twitter and asked for help with this issue...that afternoon I received a response from them asking for my name and information. I was told that someone would be in touch with me soon (which I was expecting the run around again). To my surprise, when I came home from work the next day...there was a fedex envelope for me containing 4 spacers.
Needless to say, the sharp piece ended up falling off but the band still feels pretty solid. I have opted to hold off on replacing it until I actually need one, but I'm grateful that they were able to replace it (and send me a few extras just in case).
Help is out there...just have to go to a public audience to get it
I have questions about the help you get from the Moto chat...one rep was telling me that they do not use any plastic on the metal band version, that I must have purchased a different device or a counterfeit and that I would have to go to a local jeweler for help fixing my watch.
Click to expand...
Click to collapse
Glad you got replacements. I'm going to try the twitter route. Which twitter account did you contact? @motorolasupport ?
Sent from my Nexus 4 using XDA Free mobile app
Well after reading about all the cracked backs due to the steel bands I have decided on remains with my leather band.
The design of the 360 is fantastic look wise but has an inherently bad flaw due to the position of the band and pin locations. Yes there is a design flaw.
I have had other Moto products, I had a Moto x first generation and very familiar with moto's design flaws. The Moto x had a Kevlar back which cracked and yes mine did crack in around the volume and power buttons.
I guess sometimes beautiful designs don't always work as planned.
I do think Moto has and will improve upon their next generation Moto 360 or design pin attachments that sits tight in the band slot.
If I had the right tools or time I could easily design an attachment that would prevent the steel band from cracking the plastic back.
flashallthetime said:
If I had the right tools or time I could easily design an attachment that would prevent the steel band from cracking the plastic back.
Click to expand...
Click to collapse
Like this https://www.kickstarter.com/projects/1183644800/steelconnect-m-adapters-for-moto360-smartwatch
---------- Post added at 05:25 PM ---------- Previous post was at 05:24 PM ----------
jarsh92 said:
Glad you got replacements. I'm going to try the twitter route. Which twitter account did you contact? @motorolasupport ?
Sent from my Nexus 4 using XDA Free mobile app
Click to expand...
Click to collapse
Thats the one
I
agentaaron said:
Like this https://www.kickstarter.com/projects/1183644800/steelconnect-m-adapters-for-moto360-smartwatch
---------- Post added at 05:25 PM ---------- Previous post was at 05:24 PM ----------
Thats the one
Click to expand...
Click to collapse
Pretty close, although I would prefer if that extension pin would be fixed. I would have also preferred if screws would be used rather than the typical expansion wrist band pins, this would allow for much easier and user friendly customization
Just and update. Going the twitter route worked out well. Received two plastic spacers today priority through FedEx. All I had to really do was send a pic in an email.
I did go ahead and order the m180 from steelconnect for when these spacers break. Might have to get another band as the moto band probably won't look right with it. Will have to wait and see.
Overall I was impressed with the moto support I had through twitter/email.
Sent from my Nexus 7 using XDA Free mobile app
agentaaron said:
I received my 360 for Christmas from my wife (silver metal band)...the day after Christmas, I felt something poking my wrist while wearing the watch...one of the black spacers was cracked and had a sharp point on it.
I had tried going the route of chat help and calling the support number...
Every rep I spoke to (about 5) was telling me that they do not make these spacers for individual replacement. I would have to send my watch in to have it repaired...or I could purchase a new band and it would come with the new spacers. I told them that this was absolutely unacceptable to me.
...I went to Twitter and asked for help with this issue...that afternoon I received a response from them asking for my name and information. I was told that someone would be in touch with me soon (which I was expecting the run around again). To my surprise, when I came home from work the next day...there was a fedex envelope for me containing 4 spacers.
Needless to say, the sharp piece ended up falling off but the band still feels pretty solid. I have opted to hold off on replacing it until I actually need one, but I'm grateful that they were able to replace it (and send me a few extras just in case).
Help is out there...just have to go to a public audience to get it
I have questions about the help you get from the Moto chat...one rep was telling me that they do not use any plastic on the metal band version, that I must have purchased a different device or a counterfeit and that I would have to go to a local jeweler for help fixing my watch.
Click to expand...
Click to collapse
Congratulations on getting some help through twitter! What users helped you out in receiving your information?
call this 1-800-734-5870
they are aware. they are sending me a pair and i requested if possible to give me 4pcs and they said yes.
i hope the plastic on my black metal band doesn't give out
since i'm in Canada, i'm not sure i'll receive the same level of support
I guess it pays to have a big wrist. I've had my 360 since September with a bunch of different bands both metal and leather with no cracked back. But, with a big wrist the band leaves the watch perpendicular to the housing and doesn't touch the back.
charesa39 said:
FULL DISCLOSURE: I do have tiny, girly-man wrists, and I wear the watch somewhat loose as I like to wear my watches lower on my wrist (closer to my hand, pretty much resting on it).
Click to expand...
Click to collapse
If you wear your watch literally on your wrist where your joint moves, then this will be the reason why you were able to break the plastic inserts. By wearing it on my arm, no matter how far I bend my wrist naturally, it doesn't cause any pressure that could break the plastic inserts or the back.
It's likely how you're wearing the watch that's the cause.
deltatux
I received my my SCR26 cover from Clove yesterday. Preordered almost 2 months ago, because I thought it looked pretty nice. I was quite satisfied with my Dot View case from my HTC M8, and I would have liked a similar experience from Sony.
First of all the display area in the front was nicked. It was protected on both sides by a peel-off plastic , but somehow it had gotten nicked.
Secondly, there was a snap lock on the side that fastens on the back. I can see that it's shown on the Sony site now, but I am fairly certain that it wasn't a while back. It certainly isn't shown on Clove's product page. It pretty much ruins the cover for me having to unsnap the clasp to open the case. Also: way ugly
So the phone cannot lie flat on its back when the cover is on and closed (or open for that matter). I'm returning mine and suggested that Clove change their product page to reflect the actual product.
That aside, I wasn't terribly impressed with the "style view window". It's nifty being able to take pictures without opening the case as well as skipping tracks and play/pausing, but there is, as far as I can tell, no way to view your notifications other than simply acknowledging that they are there, forcing you to open the case to see what they are.
The phone adheres to the back of the case on a sticky surface, but I can see that being problematic, if it is removed and re-inserted over time.
I wasn't terribly impressed, but then again my opinion was somewhat colored by the presence of the clasp from the get-go.
I knew that this case could be somewhat disappointing
Would you mind providing some other pictures of the case?
I was almost itching to buy this case for a very long time... Since the wait was endless, I finally took the plunge and bought a Ringke Fusion case.. after reading this review I think I made a good choice after all..
I'm kind of feeling the same way as you after getting mine today after over 2 months of waiting on it ......
Skickat från min LG-V500 via Tapatalk
Could you take some pictures of it? I'm interested in getting this cover and want to see the problem and how's the cover made myself.
Sent with my Sony Xperia Z3 Compact with Tapatalk Pro
At work right now, will see what I can do when I get home.
Same here, received after 2 month and really disappointed. Build quality is awfull but the worst is that snap lock on the side, it feels like opening a purse . Oh and also the sticky part to attached the phone at the back, how long is that going to last if I decide to use the phone witout the case. Really Sony, is that all you could do for that great phone!!?
I sent it straight back to amazon as the picture was different from the product. Now looking for a new case.
Paninno12 said:
Same here, received after 2 month and really disappointed. Build quality is awfull but the worst is that snap lock on the side, it feels like opening a purse . Oh and also the sticky part to attached the phone at the back, how long is that going to last if I decide to use the phone witout the case. Really Sony, is that all you could do for that great phone!!?
I sent it straight back to amazon as the picture was different from the product. Now looking for a new case.
Click to expand...
Click to collapse
the adhesive part will be restore just with a wipe of wet damp cloth
Thanks for the heads up.
It was already reported in this forum that this case wasn't the best one.
Hope you'll find the one you really like
I have had this cover for a good few months now. And it is falling apart... so also in the long term. ****ty cover.
note to self, never buy this cover. :s
Interesting! Was this Twit removed?
Not yet.
It's up on Instagram.
https://instagram.com/p/6X5y-2RSSk/
It should be a matter of days now. Weeks at the most.
Post appears to be gone?
I'd be really surprised if Moto put out another 360 with the flat tire. It doesn't bother me, but it's been a big source of criticism, and others have put out wearables with light sensors without having it, so....
Two sizes
http://9to5google.com/2015/08/14/mysterious-motorola-360s-360l-fcc/
I'd be buying this in a heartbeat, except that Motorola has decided to screw customers over by charging them $25 for in-warranty repairs unless they're willing to wait weeks for a swapout -- giving your credit card details and having a hold placed for the entire retail price of a new watch is no longer enough. My watch just succumbed to the cracked back syndrome, even though I have treated it like gold dust and never changed the strap. Whenever the replacement finally shows up, I'll use it until it dies and then buy it with any product *except* a Motorola.
They need to put a speaker & camera on it, that'd really make me want to upgrade over the original one, otherwise its just meh.
Also whats the relevance of that thing in the background? Is it a cat, dog or feather?
Hi all,
I've recently come back into the android fold and I'm currently using the Nexus 6P (fantastic phone btw) and now I'm branching out to other android devices.
I've always wanted a smart watch and I feel now is the time to dive in. After a lot of research that's left me with two options and I'm torn between the Moto 360 (46mm) and the Huawei watch. I've read countless reviews and they both have their pro's and con's, such as cost, display, battery, looks, functionality and I've read into the issues surrounding the charging cradles which only makes my decision more difficult.
I'm all for customization and can spend hours on XDA reading and trying tings regarding my phone and android in general which made me take note of in terms of support and activity the Moto 360 has a lot more attention on XDA, I appreciate that this is most likely due to the Moto 360 being more main stream and has been out for longer, not to mention the V1 lead the charge for android wear but user support is very important to me.
At the moment I'm not sure how I feel about the flat tyre which appears to most of the gripes for the 360 however on investigation several watches faces appear to have overcome this issue to some extent and many users after some time appear to have forgotten all about it, plus it does serve some practicality with the ambient display so it's not all bad.
Any thoughts? Pro's and con's? Have you owned both watches or come from the 360?
Hua Wei watch has sapphire crystal. Enough said.
Sent from my LG-H815 using Tapatalk
Sounds like you want moto 360. Both are great. Huawei watch much more nicer and more classy expensive looking. Moto has it in bigger size as well, so if u like bigger watch faces then you need moto.
I personally love my black Huawei. It is worth every penny. I could care less about customization and user support forums. I buy technology to help me save time in my busy life. I don't have time nor the interest to be reinventing android wear on my watch.
Sapphire
sinple said:
Hua Wei watch has sapphire crystal. Enough said.
Sent from my LG-H815 using Tapatalk
Click to expand...
Click to collapse
Bingo! Can't say enough about the durability of this watch also. Only wish it were more water proof.
---------- Post added at 06:35 AM ---------- Previous post was at 06:30 AM ----------
I don't believe the moto has a speaker either.....does it? Plus have you seen the display on the moto in ambient mode? Holy s...! It's completely pixilated. When I'm inside the house,office,mall, anywhere other than outside,the huawei ambient mode is easily visible, and completely crystal clear. No pixelation. The watches are in these ambient modes most of the time,especially if you have tilt to wake off like me. Please watch videos on you tube comparing this ambient mode with the moto.....its so nasty and ghetto looking.
My decision came down to the fact that the Moto 360 had a flat tire. I wanted a fully circular watch. I think the biggest downside to the Huawei Watch is the horrible charging mechanism. It's a pain to work with especially when I have to quickly charge my watch using a portable charger and throw it in my bag.
Hi all,
After much consideration I ended up ordering the 46mm Moto 360. It basically came down to price at the end of the day. The Huawei watch is £329 with the standard leather strap, I was able to order via a discount code a 46mm Moto 360 with a 22mm metal band and a micro Knurl Bezel for £280. Both are added extras above the standard Moto 360.
I may come back to the Huawei watch as I'm still concerned about the flat tyre and pixel density, however given the extras, screen size and the cost I felt it was too good of an option to let go.
Thanks for all the advice above!
redeuxx said:
My decision came down to the fact that the Moto 360 had a flat tire. I wanted a fully circular watch. I think the biggest downside to the Huawei Watch is the horrible charging mechanism. It's a pain to work with especially when I have to quickly charge my watch using a portable charger and throw it in my bag.
Click to expand...
Click to collapse
I am surprised about the dislikes of the HW charging mechanism. I own both HW and Gear S2 Classic. I see no advantage or disadvantage of either charging means. I hold the HW just above the dock and it snaps in place - nothing difficult. Even when using a portable charger in my bag, while hardly ever needed though, the HW stays connected to the dock. Same with the Gear S2. It is also easy to put gear on dock as it snaps on, but I am not especially pleased that there are no connector pins. I just don't care....
I haven't checked yet if Gear S2 remains docked in my bag. I think the HW is better locked though.
tinker_tf said:
Hi all,
After much consideration I ended up ordering the 46mm Moto 360. It basically came down to price at the end of the day. The Huawei watch is £329 with the standard leather strap, I was able to order via a discount code a 46mm Moto 360 with a 22mm metal band and a micro Knurl Bezel for £280. Both are added extras above the standard Moto 360.
I may come back to the Huawei watch as I'm still concerned about the flat tyre and pixel density, however given the extras, screen size and the cost I felt it was too good of an option to let go.
Thanks for all the advice above!
Click to expand...
Click to collapse
Actually I only paid £289 on Amazon for the black leather strap. I then bought a brown leather, a stainless steel band and mesh band on Amazon, pretty much identical to the originals and spent about £320 in total. Not bad for the watch and 4 straps!
Sent from my Nexus 6P using Tapatalk
I got a pretty good price on my Huawei Watch a week ago. I live in EU but ordered from USA. Even with import tax and 2 day delivery it was still cheaper than anything in the rest of the world (and I checked). It ended up costing $427/£290/€390.
I ordered silver with leather band which I am not a fan of but mesh is already on the way. Hopefully it doesn't look too feminine.
I did get stupid USA charger which is useless in Sweden, but I have a converter at home (and it costs anyway like $5) so it's all good.
This is the watch I bought, although mine was cheaper at time. $310 or so, probably some Christmas price cut:
http://www.amazon.com/gp/product/B013LKLIB0?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
I decided to order both!, I ordered the Huawei watch through Amazon at £329 with the metal strap. I felt safer in the knowledge the strap is made for the watch and comes under the same warranty with Amazon, plus Amazon are so good with returns I thought why not?
I haven't played with it too much yet as I am *still* awaiting on the moto 360. They've had the order since the 27th December but they've yet to dispatch it despite the order page saying it's ready to go.
First thoughts are - The presentation on this product is fantastic, it felt like I just bought an expensive piece of kit (technically I did?) The box, the decorating, the presentation was all very well done. It felt like a first class way of putting their device on display and for the first time in a long time, I spent so much time admiring the detail and effort that must of went into making this. However, whilst it is incredibly fancy I couldn't help but feel that once my excitement wore off, that this poor box will go into storage never to be seen and ideally with that in mind, would have liked the box it shipped in to be less deluxe so that the overall watch price would have been reduced.
The watch face feels small, which is odd as I don't even have anything to compare it to, I haven't worn a watch in months and like I said the 360 isn't here, but yet the screen feels small. The watch feels premium, screen is clear and crisp. Battery life seems better then I was expecting but again, I haven't dabbled with it too much just encase I return it.
The charging base seems a pain and could have been done better I feel. Why not have Qi charging? Or at least a decent stand? On that note, why not put that fantastic presentation box I mentioned to use and have that be part of the charging cycle.
The watch appears to be laggy, it doesn't seem fluid between the cards, or getting into the menus. Again I haven't set this watch up or spent that much time getting to know my way round it, plus with it being fairly new firmware updates should iron this out.
Overall I am happy with the watch, the box, the style, the feel and even the screen despite me thinking that it's kinda small. It's a lot of tech under a watch screen which is nothing short of amazing. However the cost of £329 is hard to swallow, I may return it for the leather strap one at £289 or may return it in favour of the 360 (if it ever gets here!)
I have used several watches. The Hauwei does lag some. I notice it more going into settings, it takes a second to open. Sometimes I think I missed a tap, but a second tap makes it go haywire. The hardware is identical to other watches that are smooth as butter, so it has to be a software setting. Perhaps they have the min cpu speed to slow or something. I dunno. It could be ironed out with an update or custom kernel.
The charging dock is kind of a pain compared to others. My LG G Watch has the same setup except the dock had a contoured lip around so it would slide into place with ease. It was also square = easier to align. The circle hauwei, when I dock, I have to semi spin it until it latches in. Even my ZenWatch2 just had a small magnetic clip and would snap on almost automatically.
The Hauwei is small. For me thats great because I am a smaller dude. My LG and Asus were big. The ZenWatch2 was good because of the curved screen. But my friends always called it my iPad Mini Watch.
The Motorola 360 has nice features but lacks a very important one; no speaker. And trust me, it is very important.
Heres why:
A watch is designed to give you personal freedom away from your phone. So I tend to not cling to it as much. It gets left on my desk, couch, charger, etc. When a call comes in... you find yourself scrambling to get to your phone. You typically do not have time to grab it and answer it, without some sort of awkward silence where you answered it from the watch and still in the process of grabbing the watch. Also when I am oncall for work, and in my pool swimming, I can dismiss unimportant emails and grab calls without having to kill myself trying to get out, dry off, and answer it before it goes to VM.
Food for thought. The speaker support was what I was waiting on to upgrade my LG G Watch. If you are going for just a cheap round smart watch, just buy the Moto 360 1st gen. I don't see the difference between them. Still has the flat tire and ****ty battery life.