Q&A for [ROM][5.3.14] .::StockMOD ROM::. | Galaxy S5 | UVUENC2 | RLS2.1
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][5.3.14] .::StockMOD ROM::. | Galaxy S5 | UVUENC2 | RLS2.1. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
ATT Galaxy S III i747 WiFi Calling?
I have an i747 phone unlocked to T-mobile running cyanogenmod 11 4.4.4 kitkat. The Baseband version is i747UCUFNE4, which is the kitkat baseband. Can I install this rom and if so are there any specific steps I would have to follow? Would I have to somehow downgrade the baseband to the Jellybean one?
All I'm really after with this ROM is wifi calling, which I've read does work with an ATT phone on this ROM.
Quick question
I had original update from T-Mobile to 4.3 stock .... rooted and put on CM 11 M12 and added also OnePlusOne Theme ... if I want to switch to this ... do I still need to flash a modem ... I don't really know how that works ... or I just wipe and install this. Thanks
Question about Download
This may very well be a dumb question but why is it everytime I try to download a custom rom from Dev-Host file sharing system, the zip file downloads as an EXE file. Very suspicious of this, but what is it that I don't know because I've seen this on many download links for various roms!
Where's the zip file for this rom?
When I flash rom it flashes like a normal rom I get no aroma install or options for aroma, what am I doing wrong?
Sent from my SGH-T999 using XDA Free mobile app
slimkat v9 to stock mod rom
Good day. Pls help me.
I got my s3 sgh-t999 not brand new. With a slimkat v9 rom installed. I want to use stock mod rom because it is the only stock based rom i found here on xda for sgh-t999. My question, is it safe to flash this rom from slimkat v9 to stockmod rom. Im on t999uvuenc2 baseband and 4.4.4 kitkat. Please someone help me.
slimkat v9 to stock mod rom
Is it safe to flash din rom coming from slimkat v9. Im on uvuenc2 and 4.4.4 kitkat
Hi I have a question on updating my bootloader on my phone. I have a t999l and I am running 4.1.2 my modem is UVUBNC1 I flashed the modem myself. I want to flash StockMod with TWRP that my phone already has. I was told in the main thread for this ROM that its in my best interest to update the bootloader. How do I do this without having to flash a 4.3 stock rom with odin? I'm trying not to have to re root my phone. I guess I'm just confused...lol
turntablez123 said:
Hi I have a question on updating my bootloader on my phone. I have a t999l and I am running 4.1.2 my modem is UVUBNC1 I flashed the modem myself. I want to flash StockMod with TWRP that my phone already has. I was told in the main thread for this ROM that its in my best interest to update the bootloader. How do I do this without having to flash a 4.3 stock rom with odin? I'm trying not to have to re root my phone. I guess I'm just confused...lol
Click to expand...
Click to collapse
You have to. And re-rooting is way easier provided you have the TWRP .tar file and ODIN in hand along with the SuperSU flashable to enable root. Your model's latest ends with the letters NF4, click here for the ODIN firmware download.
nirogu325 said:
You have to. And re-rooting is way easier provided you have the TWRP .tar file and ODIN in hand along with the SuperSU flashable to enable root. Your model's latest ends with the letters NF4, click here for the ODIN firmware download.
Click to expand...
Click to collapse
That did the trick! I'm all set. Thank you!
Missing .tar file
I plan to do a ROM upgrade on my stock Samsung Galaxy S III SGH-T999 but after downloading the file twice, there was no .tar or md5 file on the zip folder to be used for ODIN to flash.
Below are the only files that was on the zip folder and the total size was over 1gb:
META-INF (Folder)
system (Folder)
boot (Image File)
I downloaded it from: http://d-h.st/atH. Was there another mirror link to get the correct ROM file?
I appreciate any help.
UPDATE: I figured this out by watching YT and using 7z.
Finally got it installed! Thanks Devs and for the help of DocHoliday777! Your inbox is full.
I have a question regarding this ROM.
1. Is there a way to remove some of the default system wallpapers?
2. Will i have ROM issues if i flash the latest firmware to UVUEOH1?
Look in /system/wallpaper
Thanks for the heads up on my inbox. Was gone a while and need to clean it out!
As for the firmware update, it may cause minor issues with flashing roms, but it should be just fine as far as functionality goes. Flashing roms may be an issue simply because the updater-script may not have been recently updated to include OH1 firmware.
I'll just stick with T999UVUENC2 until a new StockROM for the newer UVUEOH1 build.
Related
Q&A for S3Rx 3.0 TouchWiz 4.3 NC2 (4-5-14) Full AROMA
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for S3Rx 3.0 TouchWiz 4.3 NC2 (4-5-14) Full AROMA. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
S3Rx ROM on T999LUVUBNF4
Good day.
I have recently update my Samsung Galaxy S3 SGH-T999L using kies.
Baseband version: T999LUVUBNF4
I wanted to install your ROM to my device but it says that the latest supported version is at T999UVUENC2. Is it possible to install it on UVUBNF4? Or if not, is it possible to revert back to NC2?
Your reply would be much appreciated. Thank you.
Phone unlocked
Hello there, I have my stock T999 4.3 rooted and unlocked (not factory unlocked) to use with other network. I would like to know if i flash and use this ROM will lock my S3 again? Thanks.
GoldenboyXD said:
Hello there, I have my stock T999 4.3 rooted and unlocked (not factory unlocked) to use with other network. I would like to know if i flash and use this ROM will lock my S3 again? Thanks.
Click to expand...
Click to collapse
should be fine
Best TMO S3 rom
I have to say ... this is the best TMO S3 rom without a doubt .. I've tried many KK, Lollipop , Cyaogenmod etc but not oTne comes close to the stability and battery life..
Thank you
Soft bricked my device
So I followed your instructions to the best of my ability.
1. Make sure you are on your most current modem... T999 = MJC || T999L = MK4 DocHoliday77 modem thread http://forum.xda-developers.com/show....php?t=1880987
(My rom is the latest which is UVUENC2)
2. Full Wipe
(Did that)
3. Install ROM.
(Did that) - then afterwards it prompted me to a white page install/menu section. Since I already installed the ROM through CWM I proceeded to select "Install Kernel Only" which is apparently step #4.
4.Make sure you choose KT747, DKP or MJ2 kernel during install.
(I chose DKP to install)
5. Profit... enjoy!
(I did not enjoy since my phone never booted, it was stuck on S3 logo, had to go back into recovery!)
Soooo what did I do wrong??
I love how xda encourages new users to ask questions in the Q&A tab and even suggest that their questions are more likely to be answered that way.
Few months later, still no answer on my Q above. Btw the way roms are organized on these forums are horrible. Please fix.
I wonder if anyone knows the answer to musnyk and lazy monster Q....I would like to know also....thanks?
If I could add on to the other questions posted. I have T999L with NF4. When I install this rom, end up with Baseband of NF4, Build of NC2 and seem to lose LTE capability. Would love to get the proper steps when dealing with an NF4 phone.
EDIT: Seems to be missing: persist.radio.lteon - do you know how I can add/create this?
To update the bootloader modem
The baseband version I currently have is T999UVUEMJC
I got the new NC2 bootloader modem package downloaded.
Complete NC2 bootloader and modem *Added 3-22-14* Thanks to @Synthetic.Nightmare
http://www.mediafire.com/download/fc..._modem_4.3.zip
Click to expand...
Click to collapse
Which option in odin is used to flash this package? PDA or Phone(CP)?
Error when flashing!!!! Help !!!!!!!
ok i have the 4.3 stock from tmobile i used a couple of cwn version but none of them are letting me flash it i keep getting an error that says (bad) Operation aboarded and it has the little android in a coma with no new room, i rooted the phone but still no luck any advice????
[Q&A] [ROM][4.3][Dec-2013] AT&T I317-UCUBMK6/MJ4 *Stock* Rooted Odex/De-Odex/Odin
Q&A for [ROM][4.3][Dec-2013] AT&T I317-UCUBMK6/MJ4 *Stock* Rooted Odex/De-Odex/Odin
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][4.3][Dec-2013] AT&T I317-UCUBMK6/MJ4 *Stock* Rooted Odex/De-Odex/Odin. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
The 3 main download links don't seem to be working..
I'm confused.
I want to return a friends AT&T Note 2 to stock firmware. It is on MK6 bootloader.
I've read a few threads but I don't see much for returning to stock when you are already on MK6.
The Knox counter is already tripped to =1.
All my friend want is to put the phone back to latest stock firmware and to root it so that Xposed Framework can be installed.
I would appreciate all the help.
Thanks
THANK YOU!!!!
You saved my day! Thanks.
help help
Please hellllp... the automatic update appear if this safe to update
vhine1968 said:
Please hellllp... the automatic update appear if this safe to update
Click to expand...
Click to collapse
There have been 2 updates since this build. NE5 and NJ1.
Look in http://forum.xda-developers.com/galaxy-note-2-att/development for ROMs.
Not sure what you consider safe.
You have given no information as to what the status of your phone is. Rooted, (assuming you're running this ROM and you have not removed Rooy) custom recovery, you could have used ODIN to flash this ROM (if you are running it)
If you are still rooted, or you have removed any of the stock programs, the update will fail during it's pre-check phase.
can i upgrade 4.3 to any custom rom like dn3
can i upgrade 4.3 to any custom rom like dn3
Note II i317
After installation 4.3 custom rom every thing is looking fine. but the main problem which i faced that i am facing incoming call issue. if my mobile in standby mode and some one call to me my cell phone shows switched off and same time i call to any number or text then i can receive calls....where is the issue
Samsung galaxy note 2 sgh-i317 not restoring with odin
Hello,
My friend brought me his note 2 that seems to be bricked. He was about to smash it against the ground before I took it from. I hooked it up to KIES and it couldn't connect. Right now it is stuck on the SAMSUNG pulsing logo. I've downloaded stock rom and flashed it in Odin and it passed. Then did a factory reset and tried to see if it would start then and it didn't. Is there a way to find out what bootloader is on it? It mentions something about the efs not mounting and something else about magic string missing.
Any help or guides provided would be greatly appreciated.
Thank you.
Q&A for [ROM]【5.0】BEANSTALK 5.0.x JFLTETMO [UNOFFICIAL]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM]【5.0】BEANSTALK 5.0.x JFLTETMO [UNOFFICIAL]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Lollipop Compatible Bootloader/Modem for MetroPCS Variant is NK3
Maverick923 said:
I have a M919N, and I have flashed this rom, and everything seems to be ok. When I enable wifi, I see turning on, but that is it. My baseband is M919NUVUEMK5. What do I need to do to get Wifi to work?
Thanks for any help.
Click to expand...
Click to collapse
For the MetroPCS variant (M919N), you need to update your bootloader and modem/HLOS to the latest, Lollipop compatible version. Currently, NK3 is the latest, compatible bootloader/modem combination for M919N on sammobile: www sammobile com/firmwares/download/39987/M919NUVUFNK3_M919NTMBFNK3_TMB.zip
Unable to install on SGH-M919
I have the sgh-m919 and we trying to install a custom rom I get:
unmount of /system failed; no such volume
script succeeded: result was [0.200000]
Install from sdcard complete.
press any key to continue.
I am using PhilZ Touch Recovery 6.15.4 for jfltetmo. I was on stock 4.4.4 when I started
bootloader/modem Q
esherwoo77 said:
For the MetroPCS variant (M919N), you need to update your bootloader and modem/HLOS to the latest, Lollipop compatible version. Currently, NK3 is the latest, compatible bootloader/modem combination for M919N on sammobile: www sammobile com/firmwares/download/39987/M919NUVUFNK3_M919NTMBFNK3_TMB.zip
Click to expand...
Click to collapse
I also have the metro PCs S4, is this ROM compatible, and do I flash that modem through the recovery or Odin?
Does anyone notice problems with putting the brightness all the way down and locking and unlocking the screen?
Benstalk jfltetmo on jfltexx
Hello, could you please tell me how you managed to install the Benstalk jftetmo on your S975L from Straigh Talk ? I have the same version of trwp 2.8.3 and when I try to flash that ROM i get this error: This package is for device: jfltetmo, jflte; this device is jfltexx.
Is there a way to transform this device from jfltexx to jfltetmo before flashing Benstalk ROM ? or is it any Benstalk jfltexx version available.
Thanks !
AT&T
Any chance y'all can work your magic and crank out one of these sweet Beanstalk 5.0s for the AT&T S4 (SGH-i337) jflte?
Low voice recorder volume
hey thanks for providing us with a nice lollipop rom, love the boot animation too its different but i want to report an issue that i find common to many roms ive tried, voice notes on whatsapp and voice recorder apps have an extremely low volume. i barely see anyone reporting or even making note of this issue its as if they ignore it, never tried it, or never cared enough to speak on it or try to fix it. this issue is veerrrrry common to jflte and jfltetmo roms, i own a SGH-M919, i have seen it on this rom, Dirty Unicorns, Paranoid android, cm11 (worked in snapshot m9 but went bad in m10 and was never fixed), cm12, android ice cold project, and a bunch of others that im sitting here to try but cant remember, i must say tho that i am on a 4.4.4 nightly of omnirom that is great, best in terms of stability and support but no disrespect when i say that not trying to compare your work although i might have just did im just trying to share my experiences with you, maybe it could help.
also if you dont have this problem could you also let me know, im starting to get a feeling im the only one with this issue since literally NO THREAD has made note of this issue EXCEPT for danvdh GPE 5.0 rom which is bitter sweet because the voice recorder works but foldermount doesnt.
I cannot view content on my SD card, can anybody please share how to view SD card. Thanks in advance.
Sent from my SGH-M919 using XDA Free mobile app
awsome
Thanks
Beanstalk on SGH-M919, any bug?
Im thinking on flash this rom on my mobile, based in old experiences of flashing custom roms, is any bug on this rom? I mean, Wifi works? 3G/4G? Calls? Audio in general (Music, bluetooth, etc), thanks in advance for your opinions.
Hello,
I've tried everything under the sun to get my rooted note 4's native hotspot to work properly. I've tried the Galaxy Tools and Sqlite method and still can't get it to fuction.
If there's anyone out there that's has the tools to help me, please help.
It is greatly appreciated.
I'll even donate money to anyone who could give me a hand.
Thanks
william39sd
william39sd said:
Hello,
I've tried everything under the sun to get my rooted note 4's native hotspot to work properly. I've tried the Galaxy Tools and Sqlite method and still can't get it to fuction.
If there's anyone out there that's has the tools to help me, please help.
It is greatly appreciated.
I'll even donate money to anyone who could give me a hand.
Thanks
william39sd
Click to expand...
Click to collapse
Find my Hybrid rom thread and you'll find two versions of hotspot mod in the OP down in mods section.. If youre on the new NK2 update then flash the one you need and forget about it. Odexed if your on the factory installed rom and deodexed if you're running a custom deodexed rom.
Edit: Both of my hotspot mods are for NK2 so check to see which build you have because there is most likely a difference between the NIE and NK2. jar file responsible for this mod.
tx_dbs_tx said:
Find my Hybrid rom thread and you'll find two versions of hotspot mod in the OP down in mods section.. If youre on the new NK2 update then flash the one you need and forget about it. Odexed if your on the factory installed rom and deodexed if you're running a custom deodexed rom.
Edit: Both of my hotspot mods are for NK2 so check to see which build you have because there is most likely a difference between the NIE and NK2. jar file responsible for this mod.
Click to expand...
Click to collapse
Thanks for the support. The last 3 on my baseband is NK2. Soes that mean i will have to download and install the x series rom instead of the hybrid rom seeing both hybrids are NIE?
Thanks
If you have the NK2 modem then you obviously took the NK2 ota or odin flashed the NK2 rom .tar. Like I said, unless you have flashed a custom deodexed rom, you are on a stock odexed rom. Therefore you need the odexed NK2 hotspot mod. You don't need to flash my rom to use the hotspot mod. Just download it and flash it. Your hotspot will then work.
[Q&A] [TOOLKIT] UNIFIED ANDROID TOOLKIT - GALAXY NOTE 10.1 [2014] - Drivers, Root, R
Q&A for [TOOLKIT] UNIFIED ANDROID TOOLKIT - GALAXY NOTE 10.1 [2014] - Drivers, Root, Recovery
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [TOOLKIT] UNIFIED ANDROID TOOLKIT - GALAXY NOTE 10.1 [2014] - Drivers, Root, Recovery. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
P600 KK 4.4.2 to 4.3 Stock ROM
I have TWRP and am running Hyperdrive KK RLS5.1. I really miss the normal split-screen on Android 4.3 and the fact that it never went to immersive mode. Can I use this toolkit to flash back the ROM for Android 4.3 that I can download from SkipsSoft? Or is there a better way, or no way to go back?
timstlast said:
I have TWRP and am running Hyperdrive KK RLS5.1. I really miss the normal split-screen on Android 4.3 and the fact that it never went to immersive mode. Can I use this toolkit to flash back the ROM for Android 4.3 that I can download from SkipsSoft? Or is there a better way, or no way to go back?
Click to expand...
Click to collapse
You want to return to stock rom. Download stock rom 4.3 for your region from sammobile.com and flash with odin.
shayind4 said:
You want to return to stock rom. Download stock rom 4.3 for your region from sammobile.com and flash with odin.
Click to expand...
Click to collapse
Will that work as easily as that? I have read elsewhere that once you have gone to 4.4.2 with Knox, that you can't go back. Supposedly it will brick my device. What I failed to mention in my post is that before installing the custom ROM, I was running stock 4.4.2 Please respond.
timstlast said:
Will that work as easily as that? I have read elsewhere that once you have gone to 4.4.2 with Knox, that you can't go back. Supposedly it will brick my device. What I failed to mention in my post is that before installing the custom ROM, I was running stock 4.4.2 Please respond.
Click to expand...
Click to collapse
Hi
It's possible to downgrade from 4.4.2 to 4.3 using odin.
Check here:
http://forum.xda-developers.com/showthread.php?t=2538464
http://forum.xda-developers.com/showthread.php?t=2768219
shayind4
Unified_Android_ToolKit - lollipop
'cause i have less than 10 posts i can't ask directly...
first at all - i love this
kit 'cause i repair a lot of different phons and with this one i don't need 3000 different tools !
is there a possibility for an update to use it also with lollipop ???
thx for answer