[Q] WIFI problem !! :( E980 at&t - LG Optimus G Pro

Facing wifi problem on every custom rom I installed on my LG optimus G pro..
Working perfect on stock based roms.. Anybody know whats the issue ? Using cwm 6..0.4.7 and new phillz touch recovery to install roms but facing same problem.. When phone take first boot after installation the wifi is working but after some hours or next reboot the wifi will no more working.. Found something in build.prop
ro.wifi,channels= "blank"
I put some values of channel in it but it wont work
Plz help me..
Sorry for bad english

zohaibkhan143 said:
Facing wifi problem on every custom rom I installed on my LG optimus G pro..
Working perfect on stock based roms.. Anybody know whats the issue ? Using cwm 6..0.4.7 and new phillz touch recovery to install roms but facing same problem.. When phone take first boot after installation the wifi is working but after some hours or next reboot the wifi will no more working.. Found something in build.prop
ro.wifi,channels= "blank"
I put some values of channel in it but it wont work
Plz help me..
Sorry for bad english
Click to expand...
Click to collapse
It's not unusual for that entry in the build.prop to be blank, and shouldn't cause issues. I think the default there should be '11 11', though having it blank should be fine (pretty certain).
> Working perfect on stock based rom
Which roms are you flashing that are giving you problems? Many of the e980 roms are bugged out in various ways, maybe it's just a quirk of the one(s) you flashed? I had a similar problem recently, wifi just would *not* stay enabled, would not behave. I don't remember which rom it was though; I flash too much.
You've flashed the Kitkat 20g modem, yes? If all else flails, you could always flash back to Kitkat stock and start over, that's guaranteed to tell you whether its a hardware or software problem (if it persists after that: hardward, got to be).

help
culot said:
It's not unusual for that entry in the build.prop to be blank, and shouldn't cause issues. I think the default there should be '11 11', though having it blank should be fine (pretty certain).
> Working perfect on stock based rom
Which roms are you flashing that are giving you problems? Many of the e980 roms are bugged out in various ways, maybe it's just a quirk of the one(s) you flashed? I had a similar problem recently, wifi just would *not* stay enabled, would not behave. I don't remember which rom it was though; I flash too much.
You've flashed the Kitkat 20g modem, yes? If all else flails, you could always flash back to Kitkat stock and start over, that's guaranteed to tell you whether its a hardware or software problem (if it persists after that: hardward, got to be).
Click to expand...
Click to collapse
thanks for reply
I installed cm11 cm12 blisspop v1.0 1.1 .12 1.3 all these roms got same problem that is wifi
I m on JB 4.1.2 stock e98010p a&t
there is no wifi bugs in these custon roms.. only me facing this issue in every custom rom... Can u give me the kitkat firmware link e98020g ? I m gonna flash that rom then I will root my device on KK then I will try to flash custom roms and tell you about results.. thanks
plz provide link..
sorry for bad english

zohaibkhan143 said:
thanks for reply
I installed cm11 cm12 blisspop v1.0 1.1 .12 1.3 all these roms got same problem that is wifi
I m on JB 4.1.2 stock e98010p a&t
there is no wifi bugs in these custon roms.. only me facing this issue in every custom rom... Can u give me the kitkat firmware link e98020g ? I m gonna flash that rom then I will root my device on KK then I will try to flash custom roms and tell you about results.. thanks
plz provide link..
sorry for bad english
Click to expand...
Click to collapse
Booyah: E980 20g Kitkat TOT.
Also, with Lollipop roms, I don't think any of them are totally stable or functionally 100% yet, so that's not a place to go if you want stuff to work. There's plenty of nice Kitkat roms like PAC-rom or Carbon-Rom is you want stability and want for your phone to work fully (but thats no fun! ).

help
culot said:
Booyah: E980 20g Kitkat TOT.
Also, with Lollipop roms, I don't think any of them are totally stable or functionally 100% yet, so that's not a place to go if you want stuff to work. There's plenty of nice Kitkat roms like PAC-rom or Carbon-Rom is you want stability and want for your phone to work fully (but thats no fun! ).
Click to expand...
Click to collapse
Ok bro thanks for helping me

zohaibkhan143 said:
Ok bro thanks for helping me
Click to expand...
Click to collapse
bro I installed stock Kk and root my device but I unable to install cusom recovery using freegee app.. Any other way to install custom recovery ?

culot said:
Booyah: E980 20g Kitkat TOT.
Also, with Lollipop roms, I don't think any of them are totally stable or functionally 100% yet, so that's not a place to go if you want stuff to work. There's plenty of nice Kitkat roms like PAC-rom or Carbon-Rom is you want stability and want for your phone to work fully (but thats no fun! ).
Click to expand...
Click to collapse
bro I installed stock Kk and root my device but I unable to install cusom recovery using freegee app.. Any other way to install custom recovery ?

zohaibkhan143 said:
bro I installed stock Kk and root my device but I unable to install cusom recovery using freegee app.. Any other way to install custom recovery ?
Click to expand...
Click to collapse
Yoink.
^-- Freegee never lets me in unless I flash the Sphinx GPro Recovery CWM recovery first. Once that is done, it's all good.

culot said:
Yoink.
^-- Freegee never lets me in unless I flash the Sphinx GPro Recovery CWM recovery first. Once that is done, it's all good.
Click to expand...
Click to collapse
Thanks I will try it soon..!

culot said:
Yoink.
^-- Freegee never lets me in unless I flash the Sphinx GPro Recovery CWM recovery first. Once that is done, it's all good.
Click to expand...
Click to collapse
Installed sucesfully but one problem in this cwm..external_sd mounting failed cwm ver 6.0.4.4
help plz

zohaibkhan143 said:
Installed sucesfully but one problem in this cwm..external_sd mounting failed cwm ver 6.0.4.4
help plz
Click to expand...
Click to collapse
Oh, no, you misunderstood: you don't use the CWM, you only install it and then quickly install *over* it with one of Freegee's recoveries. Never use the Sphinx CWM, as you'll get errors when you go to flash roms. You only insatll the Sphinx CWM so that Freegee will recognize your device and function, it's only a stepping stone to Freegee, not a recovery you should use on its own.
And, in light of recent developments on the TWRP 2.8 front, I'd say give that a try instead. It mounts your external SD just fine. THe only things I've flashed with it are BlissPop builds and Gapps, but all without an issue yet. Go for the one with the Play theme and enjoy its gorgeous colors.

Thanks buddy.. Freegee recognized my device and installed cwm succesfully
Sent from my LG-E980 using XDA Free mobile app

help
after kitkat update now I m installed those custom roms again but still there is a same wifi problem sick off totally !

Related

[Q] Arc S Beanstalk WiFi problem

Hello, I am new in this forum and have a question about Beanstalk.
I have rooted my phone, installed the Kernel from the zip of the rom and then flashed the rom. Mostly all is working, but my wifi is really really slow.
And this is since I installed the rom, before the speed was a lot faster. The search didn't help me very much and google either.
So maybe someone can help me here?
I have tested Wifi fixer but it didn't change anything.
Sorry if this question is stupid, but I am not really an expert about ROMs.
Yup,
Beanstalk run whit the darkkernel 20131024, like CM10.2 LX , i test Beanstalk, LX, Carbon and i can't turn on wifi even whit the dark kernel wifi module 20131024. I think it's a kernel problem ... just wait for the next version...
I now found a solution and it seems to work, but I can't promise ^^
Flashed the TWRP Kernel (http://forum.xda-developers.com/showthread.php?t=2075549) and all is working and wifi ist now a lot faster
falshing
hi
its the first time i'll be using TWRP...
is this ok to change between CWM and TWRP?
i mean, can i freely go back to CWM if TWRP wont work?
thank you...
dropsy1234 said:
hi
its the first time i'll be using TWRP...
is this ok to change between CWM and TWRP?
i mean, can i freely go back to CWM if TWRP wont work?
thank you...
Click to expand...
Click to collapse
I had no problem to change between them, but it's different from persom to person whyever.

[Q] How to update from 4.1.2 custom rom to 4.2.2 or higher

Hi Everyone,
I do know how to flash a new rom however I had issues flashing from stock 4.1.2 to custom 4.2.2 before (device wouldn't pass the boot screen). So do I have to be on a specific 4.1.2 rom to upgrade or I need to upgrade to a stock 4.2.2 first and then upgrade to a custom one?
Please recommend a fast 4.2.2 custom rom. I would like to keep dual sim feature if possible although I know most roms only support single sim.
My current rom info:
4.1.2
Baseband: I9082XXAMC4
Thanks in advance.
adam2010 said:
Hi Everyone,
I do know how to flash a new rom however I had issues flashing from stock 4.1.2 to custom 4.2.2 before (device wouldn't pass the boot screen). So do I have to be on a specific 4.1.2 rom to upgrade or I need to upgrade to a stock 4.2.2 first and then upgrade to a custom one?
Please recommend a fast 4.2.2 custom rom. I would like to keep dual sim feature if possible although I know most roms only support single sim.
My current rom info:
4.1.2
Baseband: I9082XXAMC4
Thanks in advance.
Click to expand...
Click to collapse
simple one line if want dual sim,(stock based roms only)..u can install stock rom 4.2.2....or balliboxers GENNXT rom based on latest firmware...
NOTE: RAM USAGE OF STOCK AND STOCK BASED ROMS IS HIGH....SO LESSER MULTITASKS HANDLES!
if u can compromise with dual sim ..then u can install slimbean roms...(as u mentioned u want lightest and fastest)... but as they are small and fast, they dont have many extra feature lik halo..bt are lightweight..less ram usage...
bt i wonder why u want 4.2.2 rom when u can installl latest kitkat 4.4.2 (cm11,slimkat rom, carbon rom)..
they all are kitkat roms..........
with cm being a base rom for every rom and a light good rom...so is slimkat...and carbon with good future updates including halo features....
if u still wanna stick to 4.2.2 ....then u got slimbean rom...cm rom....(both dont have halo feature),.bt light...or u cn have PAC,resurrection remix rom(for halo multitasking)...
(gaming is better on kitkat roms)
its all ur choice....
if u want any qsns u can ..
hope i helped ..
raghavsharmaxda said:
simple one line if want dual sim,(stock based roms only)..u can install stock rom 4.2.2....or balliboxers GENNXT rom based on latest firmware...
NOTE: RAM USAGE OF STOCK AND STOCK BASED ROMS IS HIGH....SO LESSER MULTITASKS HANDLES!
if u can compromise with dual sim ..then u can install slimbean roms...(as u mentioned u want lightest and fastest)... but as they are small and fast, they dont have many extra feature lik halo..bt are lightweight..less ram usage...
bt i wonder why u want 4.2.2 rom when u can installl latest kitkat 4.4.2 (cm11,slimkat rom, carbon rom)..
they all are kitkat roms..........
with cm being a base rom for every rom and a light good rom...so is slimkat...and carbon with good future updates including halo features....
if u still wanna stick to 4.2.2 ....then u got slimbean rom...cm rom....(both dont have halo feature),.bt light...or u cn have PAC,resurrection remix rom(for halo multitasking)...
(gaming is better on kitkat roms)
its all ur choice....
if u want any qsns u can ..
hope i helped ..
Click to expand...
Click to collapse
First of all, thanks for your awesome reply
Basically I'm on stock rom without useless Samsung apps. Instructions for Pac/resurrection says I need to be on stock rom in order to upgrade to 4.2.2. So am I ok to flash their rom or first install a stock rom?
You mentioned kitkat roms are better and I agree, however based on instructions I need to be on 4.2.2 first before upgrading
Which recovery is the best for making nandroid backups? clockworkmod seems to have issues occasionally creating bad backups.
Kitkat roms seems to have app2sd enabled by default, right? and no issues with Xposed framework modules?
adam2010 said:
First of all, thanks for your awesome reply
Basically I'm on stock rom without useless Samsung apps. Instructions for Pac/resurrection says I need to be on stock rom in order to upgrade to 4.2.2. So am I ok to flash their rom or first install a stock rom?
You mentioned kitkat roms are better and I agree, however based on instructions I need to be on 4.2.2 first before upgrading
Which recovery is the best for making nandroid backups? clockworkmod seems to have issues occasionally creating bad backups.
Kitkat roms seems to have app2sd enabled by default, right? and no issues with Xposed framework modules?
Click to expand...
Click to collapse
xposed is working fine on dalvik runtime(as google introduced new runtime with 4.4 named ART ,WHICH CONSUMES LESS RAM, BUT IS UNSTABLE)...
when they say that u need to be on stock ROM 4.1.2 , they actually mean the 4.1.2 bootloader..so its okat if u are on GENNXT ROM...stock..abit modified stock 4.1.2...(they specifically mean that if u want 4.2.2 rom, be on 4.1.2 bootloader...and if u want kitkat rom..then be on 4.2.2 rom(any stock based 4.2.2 rom like gennxt or slight modifyd 4.2.2 will do , as all they need is 4.2.2 bootloader for kk roms to work)...if u want kitkat rom.....be on stock based rom..which are touchwiz based roms of 4.2.2)....
so flash 4.2.2 rom by odin..and den install kitkat...if u face any problem ....just pm me ...and ya..
always do wipe cache,dalvikcache and data(if told) , whenever u flash anything(before and after flashing)... u can ask any qsna u wanna ask..hope i helped.
raghavsharmaxda said:
xposed is working fine on dalvik runtime(as google introduced new runtime with 4.4 named ART ,WHICH CONSUMES LESS RAM, BUT IS UNSTABLE)...
when they say that u need to be on stock ROM 4.1.2 , they actually mean the 4.1.2 bootloader..so its okat if u are on GENNXT ROM...stock..abit modified stock 4.1.2...(they specifically mean that if u want 4.2.2 rom, be on 4.1.2 bootloader...and if u want kitkat rom..then be on 4.2.2 rom(any stock based 4.2.2 rom like gennxt or slight modifyd 4.2.2 will do , as all they need is 4.2.2 bootloader for kk roms to work)...if u want kitkat rom.....be on stock based rom..which are touchwiz based roms of 4.2.2)....
so flash 4.2.2 rom by odin..and den install kitkat...if u face any problem ....just pm me ...and ya..
always do wipe cache,dalvikcache and data(if told) , whenever u flash anything(before and after flashing)... u can ask any qsna u wanna ask..hope i helped.
Click to expand...
Click to collapse
one question from my side as well.
I am on stock rooted 4.1.2 rom and I want to upgrade to stock 4.2.2 rom. what would be the best method?
can I install 4.2.2 latest version by flashing via odin directly or do I need to unroot first?
or it will be automatically unrooted when I install 4.2.2(stock) latest over my 4.1.2(stock) by odin?
I hope you got my question.
Sent from my GT-I9082
Sent from my GT-I9082
IdenTT said:
one question from my side as well.
I am on stock rooted 4.1.2 rom and I want to upgrade to stock 4.2.2 rom. what would be the best method?
can I install 4.2.2 latest version by flashing via odin directly or do I need to unroot first?
or it will be automatically unrooted when I install 4.2.2(stock) latest over my 4.1.2(stock) by odin?
I hope you got my question.
Sent from my GT-I9082
Sent from my GT-I9082
Click to expand...
Click to collapse
hi
if u flash the 4.2.2 via odin the root will go and u will be on stock 4.2.2
to my knowledge u dont need to un root just flash via odin and u should be good to go any one do correct me if im wrong this is based on what i read on samsung roms im on stock 4.2.2 which came with my phone i got a week back:laugh:
haree said:
hi
if u flash the 4.2.2 via odin the root will go and u will be on stock 4.2.2
to my knowledge u dont need to un root just flash via odin and u should be good to go any one do correct me if im wrong this is based on what i read on samsung roms im on stock 4.2.2 which came with my phone i got a week back:laugh:
Click to expand...
Click to collapse
currently I am on 4.1.2 stock. can I upgrade to the latest version of 4.2.2 available on [email protected] vai odin? you seems doubtful too. I am waiting for more replies..
Sent from my GT-I9082
IdenTT said:
currently I am on 4.1.2 stock. can I upgrade to the latest version of 4.2.2 available on [email protected] vai odin? you seems doubtful too. I am waiting for more replies..
Sent from my GT-I9082
Click to expand...
Click to collapse
hi
dear in just being cautious thats all i had a samsung phone long time back and i have used odin to flash back stock rom and had no problems asuming things are the same i have given u info based on my exp right now i have a new grand and i have not rooted added CWM and i dont have exp with the grand
based on my previous exp if u know how to use the odin properly it should not be a problem
IdenTT said:
currently I am on 4.1.2 stock. can I upgrade to the latest version of 4.2.2 available on [email protected] vai odin? you seems doubtful too. I am waiting for more replies..
Sent from my GT-I9082
Click to expand...
Click to collapse
yea..u just directly flash rom via odin....using odin and flashing a firmware official removes root and any other custom recoveries......so ur phone will be unrooted...and u have to root again if u wanna do something lets say TWEAKS
Hope i helped!
there is a thread specifically by chotu222 on how to root /install firmwares.....u can go in dat section and search a bit too!
raghavsharmaxda said:
yea..u just directly flash rom via odin....using odin and flashing a firmware official removes root and any other custom recoveries......so ur phone will be unrooted...and u have to root again if u wanna do something lets say TWEAKS
Hope i helped!
there is a thread specifically by chotu222 on how to root /install firmwares.....u can go in dat section and search a bit too!
Click to expand...
Click to collapse
I finally got the chance to upgrade to stock 4.2.2 via odin and gaining root again. However I was unable to install kitkat. Even though I wiped cache and did factory reset, boot didn't pass the samsung logo. I still have 2 sim support, is it worthed to install kitkat? According to your previous instructions, I needed to be on 4.2.2 base in order to upgrade to kitkat. What would you suggest in my case
Thanks
adam2010 said:
I finally got the chance to upgrade to stock 4.2.2 via odin and gaining root again. However I was unable to install kitkat. Even though I wiped cache and did factory reset, boot didn't pass the samsung logo. I still have 2 sim support, is it worthed to install kitkat? According to your previous instructions, I needed to be on 4.2.2 base in order to upgrade to kitkat. What would you suggest in my case
Thanks
Click to expand...
Click to collapse
Bro u need to be on cwm with selinux suport..just refer to the OPs of CM 11 rom.......another thing did u format system before flashing kitkat roms...instructions are very clearly written in the respective OPs bro.......u shud be able to flash these without any issues...........
adam2010 said:
I finally got the chance to upgrade to stock 4.2.2 via odin and gaining root again. However I was unable to install kitkat. Even though I wiped cache and did factory reset, boot didn't pass the samsung logo. I still have 2 sim support, is it worthed to install kitkat? According to your previous instructions, I needed to be on 4.2.2 base in order to upgrade to kitkat. What would you suggest in my case
Thanks
Click to expand...
Click to collapse
I am a heavy gamer and performancive device addict..
Kitkat dont have any fancy samsung stuffs bro..bt its all system files are of kitkat so the gaming performance is alot increased.. All game bugs are almost fix which were in 4.2.2......there is work around for every thing..
I mean..think about it..
I never use smart stay...
I nor did use much of live wallpapers as they were battery consuming..the lock screen was fancy but still lets face truth that its just meant for security/unlocking screen ...u will have to compromise with single sim and non fancy apps ..
But it does worth a try..i mean why not ... Give it a shot and i am sure u will find something unique about it...
It got its own features..so ya...its ur wish..there are also downsides of it .....u can check respective threads and know more..
Hope i helped
Sent from my GT-I9082 using Tapatalk
raghavsharmaxda said:
I am a heavy gamer and performancive device addict..
Kitkat dont have any fancy samsung stuffs bro..bt its all system files are of kitkat so the gaming performance is alot increased.. All game bugs are almost fix which were in 4.2.2......there is work around for every thing..
I mean..think about it..
I never use smart stay...
I nor did use much of live wallpapers as they were battery consuming..the lock screen was fancy but still lets face truth that its just meant for security/unlocking screen ...u will have to compromise with single sim and non fancy apps ..
But it does worth a try..i mean why not ... Give it a shot and i am sure u will find something unique about it...
It got its own features..so ya...its ur wish..there are also downsides of it .....u can check respective threads and know more..
Hope i helped
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
Ok bro, I installed selinux cmw recovery... downloaded CM11... I noticed CM is about 200mb comparing to 1 GB stock 4.2.2. Does that mean I will get more free space on internal sdcard? (out of 4GB I mean)...as others suggested, I need to do full wipe/reset factory and manually format system? and if update wasnt successful I can go back to stock via Odin right?
adam2010 said:
Ok bro, I installed selinux cmw recovery... downloaded CM11... I noticed CM is about 200mb comparing to 1 GB stock 4.2.2. Does that mean I will get more free space on internal sdcard? (out of 4GB I mean)...as others suggested, I need to do full wipe/reset factory and manually format system? and if update wasnt successful I can go back to stock via Odin right?
Click to expand...
Click to collapse
You will get a little more space than stock ROMs. And you can go back to stock via ODIN
Sent from my GT-I9082 using Tapatalk Pro
Ateekujjawal said:
You will get a little more space than stock ROMs. And you can go back to stock via ODIN
Sent from my GT-I9082 using Tapatalk Pro
Click to expand...
Click to collapse
Ok I just flashed CM successfully thanks everyone.
adam2010 said:
Ok I just flashed CM successfully thanks everyone.
Click to expand...
Click to collapse
Thanks...........
for saying Thanks, dude

[Q] Can't flash CM12 based roms

In advance i'm new to XDA so if i break any rules or guidelines please let me know
Hi,
I rescently flashed my HTC One x(International) to CM12 using the video on onexroot . com site (XDA wont let me post a ousite link because i'm new -_-)
I had to flash a new recovery with a new layout and then flash the CM12 rom. So i installed the rom and it runs great (minus the known issues). So i was looking around and i saw that there was a newer version of the cm12 rom with bug fixes and what not so i wanted to update it but since i flashed the new recovery and rom i can't flash any CM12 based rom any more, when i try i get the errorERROR EXECUTING UPDATER BINARY IN ZIP i tried many different roms to make sure it wasn't a rom related issue and i used MD5sum checker to make sure the download wan't broken but i keep getting the error. So i'm hoping one of you can help me. (phone info below)
Htc One x (International)
Hboot 1.72.0000
Recovery TWRP v2.8.5.1 HOX Team Big
ROM CM12 -12-201550214-UNOFFICIAL -endeavoru
jg1337 said:
In advance i'm new to XDA so if i break any rules or guidelines please let me know
Hi,
I rescently flashed my HTC One x(International) to CM12 using the video on onexroot . com site (XDA wont let me post a ousite link because i'm new -_-)
I had to flash a new recovery with a new layout and then flash the CM12 rom. So i installed the rom and it runs great (minus the known issues). So i was looking around and i saw that there was a newer version of the cm12 rom with bug fixes and what not so i wanted to update it but since i flashed the new recovery and rom i can't flash any CM12 based rom any more, when i try i get the errorERROR EXECUTING UPDATER BINARY IN ZIP i tried many different roms to make sure it wasn't a rom related issue and i used MD5sum checker to make sure the download wan't broken but i keep getting the error. So i'm hoping one of you can help me. (phone info below)
Htc One x (International)
Hboot 1.72.0000
Recovery TWRP v2.8.5.1 HOX Team Big
ROM CM12 -12-201550214-UNOFFICIAL -endeavoru
Click to expand...
Click to collapse
have you tried to manually flash the update zip?
you said it happened also on other roms, are they all new layout roms? always tried with the same recovery?
lukes91 said:
have you tried to manually flash the update zip?
you said it happened also on other roms, are they all new layout roms? always tried with the same recovery?
Click to expand...
Click to collapse
Yes the roms are all CM 12 so with the new layout and no i have not tried manually flash the update zip. mainly because i don't know what it is and how to flash it.
and thanks for your reply .
jg1337 said:
Yes the roms are all CM 12 so with the new layout and no i have not tried manually flash the update zip. mainly because i don't know what it is and how to flash it.
and thanks for your reply .
Click to expand...
Click to collapse
I think it's enough to download it and flash it in recovery, just like a rom
lukes91 said:
I think it's enough to download it and flash it in recovery, just like a rom
Click to expand...
Click to collapse
Where can i get this update file ? is it located in the rom folder or ?
jg1337 said:
Where can i get this update file ? is it located in the rom folder or ?
Click to expand...
Click to collapse
the update file of a rom is released by the rom developer... check in the rom thread...
lukes91 said:
the update file of a rom is released by the rom developer... check in the rom thread...
Click to expand...
Click to collapse
Oh well i think i'm in a bit of a pickle then. I didn't download it from the developer but from the link provided by the video tutorial. I don't know where the maker of the video got it from. Unless there is a global updater i will try to contact the maker of the video for the source. Thanks

Jiayu S3 Lollipop Is HERE!!!!

needrom . com has the rom. im not allowed to post links so yeah. but i am installing it now. i will keep everyone updated on how it goes.
Official Lollipop 5.1
.. is found on needrom.
http://www.needrom.com/download/s3-lollipop-v5-1/
Is this rom good to go or better to stay on KK?
SBbz said:
Is this rom good to go or better to stay on KK?
Click to expand...
Click to collapse
Lollipop is way better than KK i havent heard of anyone flashing LL and going back to kk.
lilcrise said:
Lollipop is way better than KK i havent heard of anyone flashing LL and going back to kk.
Click to expand...
Click to collapse
Nice. Tried LL (spanish mod) and so far so good.
I am running the Beta3 Version (including TWRP) and had to flash it 3 times until everything worked.
Its crazy sometimes, but after the first installation the internnal memory was not working.
After i did the same thing again. The internal memory was working but the bluetooth stopped working.
Now, after flashing it the 3rd time everythings seems to work fine.
Its important to have twrp because you need to flash the rooting zips and gapps.
but it works nice no further issues so far. ( I have a S3S)
greetz
Thomas

Kernel explain

My question is
Can i install kernel when ive got working phone like right now?? Or i have reflash all thing again?? What woukd happen if i will flash kernel right now ?? And just only kernel. And what adv gives me to install custom kernel pls explain
Hi,
Based on your post, I don't have enough information to say one way or the other. To flash another kernel you need to have an unlocked bootloader and TWRP installed. If you meet both of these conditions, then yes you can install a different kernel regardless of the fact that you aren't installing a ROM and Kernel at the same time. As always, make sure you take back ups before you proceed.
The next step is working out with kernel. You can not install a kernel designed for a stock based ROM on CM13 or vice versus.
Regards,
Ravi
well i mean yes. Ivgot fully unlocked lg g4 h815 and this phone working good but if i will flash that kernel do i need to flash again all things. Or i just simply take a switch to recovery flash only my kernel and the all soft should working ? Do u gotta me ? And ofcourse ive got stock firm from lge and ive got kernel which support my rom
Kernel
Oki ive flash and everything working good xd my question is what gives me to install a new kernel ??;p what advantages?
klisza1993 said:
well i mean yes. Ivgot fully unlocked lg g4 h815 and this phone working good but if i will flash that kernel do i need to flash again all things. Or i just simply take a switch to recovery flash only my kernel and the all soft should working ? Do u gotta me ? And ofcourse ive got stock firm from lge and ive got kernel which support my rom
Click to expand...
Click to collapse
Flashing a kernal is simple. Just head into recovery and flash. You'll keep all your data and everything would look like the same like before.
klisza1993 said:
Oki ive flash and everything working good xd my question is what gives me to install a new kernel ??;p what advantages?
Click to expand...
Click to collapse
Not too sure about the question here.
Kernel
Advantages to instll custom kernel is it worth or not
klisza1993 said:
Advantages to instll custom kernel is it worth or not
Click to expand...
Click to collapse
Read the thread of that kernel and you'll see
Sent from my LG G4

Categories

Resources