Related
I'm trying to remove some of the stock apps on my Hero, including Rosie (Sense UI) and such. What mode do I boot in before doing this?
I know all of the steps to remove apps using adb (at least I think I do), I'm fully rooted, etc. But I can't seem to get it to work.
This is the command I'm using in adb
Code:
# rm /system/app/something.apk
(replacing something.apk with the actual apk name of course)
When I boot in Recovery, it says "File not found". When I boot in Fastboot, I can't connect to adb it seems. And when I boot into Android, it says "rm failed for something.apk, Read-only file system"
So am I missing a step? What should I be doing differently?
Boot into recovery, then do a "mount -a" to mount the filesystems.
marinierb said:
Boot into recovery, then do a "mount -a" to mount the filesystems.
Click to expand...
Click to collapse
It doesn't seem to work, here's the output:
Code:
C:\asdk\tools>adb devices
List of devices attached
HT9ALNT00557 recovery
C:\asdk\tools>adb shell
/ # mount -a
mount -a
mount: mounting /dev/block/mmcblk0p2 on /system/sd failed: No such file or direc
tory
/ #
Thanks for the reply though.
Edit: Got it working, typing in "mount" alone without the -a switch worked Thanks marinierb
in normal mode you cold have just done
adb remount
adb rm /system/app/something.apk
garok89 said:
in normal mode you cold have just done
adb remount
adb rm /system/app/something.apk
Click to expand...
Click to collapse
That doesn't seem to work for me. This is what it outputs:
Code:
remount failed: Operation not permitted
If you can't remount it doesn't sound like you've rooted.
callummr said:
If you can't remount it doesn't sound like you've rooted.
Click to expand...
Click to collapse
I've performed other operations that would normally require it, so I should be rooted.
Is there a way I can confirm if it's properly rooted or not?
shell prompt:
$ .. no root
# .. root
..try typing "su" once in the shell (abd shell or adb-windows.exe shell) and see what it brings up
~David said:
It doesn't seem to work, here's the output:
Code:
C:\asdk\tools>adb devices
List of devices attached
HT9ALNT00557 recovery
C:\asdk\tools>adb shell
/ # mount -a
mount -a
mount: mounting /dev/block/mmcblk0p2 on /system/sd failed: No such file or direc
tory
/ #
Thanks for the reply though.
Edit: Got it working, typing in "mount" alone without the -a switch worked Thanks marinierb
Click to expand...
Click to collapse
typing only "mount" just list the mounted partitions, it will not mount anything. if your partition is ext4 you need to downgrade it to ext2 or ext3 or set the testflag, see "if you're having issues with ext4" in the first post of the recovery image thread.
Make sure you have run a Nandroid backup first so that if you accidentally remove something important.
Boot into normal mode. (full GUI)
Then:
Code:
C:\ADB MOUNT
C:\ADB SHELL
# rm /system/app/something.apk
reboot
You have to reboot at the end so that the apps are taken out of RAM, you may get FC (errors) if you try to do stuff after removing the apps before rebooting.
I removed (actually moved) *Twit*, Stock*, Launcher*, and a few other things.
HTH,
Unconn
This howto is for those people who are unable to root their Galaxy Tab using any of the automated procedures and do not suffer from CLPS (command-line-phobia-syndrome).
My story: After upgrading my EURO (GSM) Galaxy Tab to JM6 my persistent efforts to root the device using either the z4root or SuperOnClick methods have all been unsuccessful. z4root (v1.3.0) kept crashing at different stages, apparently depending on which and how many background apps were running. With SuperOneClick I never managed to get beyond the "changing permissions" stage.
Since both methods are basically wrappers of the rageagainstthecage application, I tried to perform the rooting procedure manually. Guess what, that worked without any problem and it is pretty easy to do.
The basic steps of the rooting process are:
1) use rageagainstthecage to get a temporary root shell
2) use the temporary root shell to copy three files to the read-only system partition the device
While I find the outlined procedure straightforward, you may not. Anyhow, try this at your own risk.
==== Prerequisites ====
I used Ubuntu 10.10 for this, but it should work on any other distro and on Windows just as well. Whatever OS you use, you need a working adb connection to your Galaxy Tab. Odin or Kies are of no use here.
You need the following binaries
* su
* busybox
* Superuser.apk
* rageagainstthecage
To get the all required files, simply download "SuperOneClickv1.5.5-ShortFuse.zip". That's what I used.
Get it here: http://forum.xda-developers.com/showthread.php?t=803682
Extract the contents of the ZIP, open a command-prompt on your computer and change to the directory where the extracted files are located.
Some advice if shell commands are not your regular cup of tea.
The following instructions show the shell commands. Some are executed on the host computer. Others are executed on the Galaxy Tab. You can differentiate between the two easily: All commands which start with "> " need to be executed in a shell on the host computer. Commands which are prefixed with "$ " are executed on the Galaxy Tab. In both case the ">" and the "$" must not be typed. If you copy+paste from this howto, make sure only to copy the commands and leave out the prompt.
==== Step 1: getting a temporary root shell ====
Copy the rageagainstthecage exploit to a temporary directory.
Code:
> adb push rageagainstthecage /data/local/tmp
263 KB/s (5392 bytes in 0.020s)
Change the file permissions and execute the exploit.
Code:
> adb shell
$ cd /data/local/tmp
$ chmod 777 rageagainstthecage
$ ./rageagainstthecage
[*] CVE-2010-EASY Android local root exploit (C) 2010 by 743C
(other output truncated)
Your shell session will be terminated which will throw you back to the regular command prompt of your host computer.
==== Step 2: restart adb server ====
Now stop and restart the adb server process.
Code:
> adb kill-server
> adb start-server
* daemon not running. starting it now *
* daemon started successfully *
Now reconnect to the Galaxy Tab again. Notice the '#' prompt. This means you have a temporary root shell now. We use this to execute some privileged commands which make the rooting permanent.
==== Step 3: making it permanent ====
First, make the system partition writeable. We need this to be able to copy su, busybox and Superuser.apk to the required locations. Then exit the android shell again.
Code:
> adb shell
# mount -o remount,rw -t rfs /dev/block/stl9 /system
# exit
Now we push busybox and su via adb. Then we install Superuser.apk.
Code:
> adb push busybox /system/bin
> adb push su /system/bin
> adb install Superuser.apk
The final steps are to change the file permissions for su and busybox and then remount the system partition as read-only again.
Code:
> adb shell
# chmod 4755 /system/bin/busybox
# chmod 4755 /system/bin/su
# mount -o remount,ro -t rfs /dev/block/stl9 /system
# exit
That should be all. Try a reboot and some apps which require root, like Titanium Backup. The Superuser.apk should popup a dialog requesting permission.
Hope this helps. Happy rooting.
[update]
This process worked for JMA and JMD as well.
"adb install" Superuser.apk instead of "adb push"
[/update]
It will help me !
Merci ;-)
Fantastic! This is just what I was looking for, thank you! I feel dumb now, because I started a thread of my own right as you posted this. You must just type faster than me
I ran a quick test, and it all looks good. One quick question actually. Why do you mount like this:
Code:
# mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
When most instructions for the Galaxy Tab have you doing something like this:
Code:
# mount -o remount,rw -t rfs /dev/block/stl9 /system
I'm not saying it is wrong, in fact, it actually worked for me. I'm just curious as to why it works like that? My understanding of mounting partitions and such in Linux is a little bit weak, so I like to indulge my curiousity by bugging fine people like yourself
Anyway, thanks again, this did exactly what I needed it to. Well done, I appreciate it.
DavidThompson256 said:
One quick question actually. Why do you mount like this:
Code:
# mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
When most instructions for the Galaxy Tab have you doing something like this:
Code:
# mount -o remount,rw -t rfs /dev/block/stl9 /system
I'm not saying it is wrong, in fact, it actually worked for me. I'm just curious as to why it works like that? My understanding of mounting partitions and such in Linux is a little bit weak, so I like to indulge my curiousity by bugging fine people like yourself
Click to expand...
Click to collapse
Thanks for pointing that out! Actually both the filesystem type and blockdevice name were totally wrong. Apparently the mount command ignores both parameters - at least when they are wrong.
I just verified this as self-punishment for not paying attention:
Code:
# mount
(...)
/dev/block/stl9 /system rfs ro,relatime,vfat,log_off,check=no,gid/uid/rwx,iocharset=utf8 0 0
(...)
/system is mounted read-only to /dev/block/stl9. This is the normal state of things.
Now I remount this without the fstype parameter and using a wrong blockdevice name:
Code:
# mount -o remount,rw /dev/block/xyz /system
# mount
(...)
/dev/block/stl9 /system rfs rw,relatime,vfat,llw,check=no,gid/uid/rwx,iocharset=utf8 0 0
(...)
Surprise, this actually remounts /system in read-write mode. This is why my original howto worked despite using the wrong parameters.
Thanks again. I corrected the HOWTO.
It works for me, but i get now error message: The application calendar save (proces com.android.providers.calendar) is unexpecly stopt. Try again. Forced closing
I had this also with SuperOneClick.
When i want to start the calender in the applications i get it also.
The application wil not run anymore.
How can i resolved this.
Thnx
leonreijnders said:
It works for me, but i get now error message: The application calendar save (proces com.android.providers.calendar) is unexpecly stopt. Try again. Forced closing
I had this also with SuperOneClick.
When i want to start the calender in the applications i get it also.
The application wil not run anymore.
How can i resolved this.
Thnx
Click to expand...
Click to collapse
That is strange. The result of the rooting process is just adding three files to the system partition. I find it hard to believe that this could lead to the problem you describe. However, while experimenting with z4root I had the the effect that there were many rageagainstthecage processes running in the background and the Galaxy Tab slowed down considerably. Perhaps there is something similar going on.
Have you tried rebooting after completing the rooting process?
Try shutting down the Tab completely.After rebooting get a shell on the Tab with "adb shell" and execute "ps". That shows the process list. If that looks normal, I would try a factory reset of the device. Which ROM version are you running?
BlackLevel: Thank you soooooooooo much... I don't get how to hit the Thanks Meter thing, but here is the old fashioned way. I used a MacBook to accomplish your perfect, step by step rooting of an AT&T Galaxy Tab i987. It helps that I'm more comfortable at the command line than with most GUI systems.
I could put this into a bash script, but that could be dangerous. People really need to look at whats happening with 'adb' and have some idea of what adb is for. I did renamed your 'adbmac' to 'adb', then I could cut and paste from your instructions except for adding ./ before the adb... ie. ./adb shell
Again, wonderful work at pulling this all together in one place.
Jeff
This guide worked perfectly! I love a nice quiet clean root and it doesn't get any better than this. You my friend deserve a cookie!
Hi Guys,
I flashed to JMA, rooted it with One Click Root, and everxthing seemdet to be okay, but activating OCLF failed....is there anybody with the same problem?
Jan
Thanks a lot !. It's clean and doesn't need a kies ...
Just a question : after reboot I have to use "su" after "adb shell" to become root.
Is there any way to be root directly after adb shell ?
And thanks again ...
Mike
mbaroukh said:
Just a question : after reboot I have to use "su" after "adb shell" to become root.
Is there any way to be root directly after adb shell ?
Click to expand...
Click to collapse
The reason is that "/sbin/adbd" (the adb daemon) is running as the shell user. It would need to run as root user instead. This requires changes to the initial ram disk where adbd the relevant settings are stored.
Dealing with "insufficient permissions for device"
Thanks, this worked for me.
One small thing: running from a Linux sustem (Ubuntu 9.04), to overcome a "insufficient permissions for device" problem, I had to put my Ubuntu terminal session into su mode and restart the ADB server -- cf. groups.google.com /group/android-discuss/browse_thread/thread/f85a795644e65b59?pli=1 :
[[
adb kill-server
sudo adb start-server
adb devices
]]
gklyne said:
One small thing: running from a Linux sustem (Ubuntu 9.04), to overcome a "insufficient permissions for device" problem, I had to put my Ubuntu terminal session into su mode and restart the ADB server -- cf. groups.google.com /group/android-discuss/browse_thread/thread/f85a795644e65b59?pli=1 :
[[
adb kill-server
sudo adb start-server
adb devices
]]
Click to expand...
Click to collapse
Thanks for the feedback. On my Ubuntu 10.10 adb runs under my regular user-id (1000) and I do not have to use sudo or run the local adb server as root. That might be due to the way the udev rules are set up. Mine are rather unrestrictive and look like this:
Code:
$ cat /etc/udev/rules.d/51-android.rules
SUBSYSTEMS=="usb", SYSFS{idVendor}=="0bb4", MODE="0666"
SUBSYSTEMS=="usb", SYSFS{idVendor}=="04e8", MODE="0666"
How do yours look like?
Which is the more simple method for root of galaxy tab euro ?are there ?
the incredible said:
Which is the more simple method for root of galaxy tab euro ?are there ?
Click to expand...
Click to collapse
Try z4root or SuperOneClick. Both methods are wrappers of the rageagainstthecage exploit and try to automate the manual process outlined here.
This thread should be a sticky. Worked like a charm.
z4root is very simple method..thanks.
thanks to Germany...
I agree, this thread should be sticky. Finaly some sense in android devel section...
Thank you very much for your guide!
I followed all the instructions in your guide, everything seems fine until I try to push the busybox and su to my Galaxy Tab.
blacklevel said:
Now we push busybox and su via adb. Then we install Superuser.apk.
Code:
> adb push busybox /system/bin
> adb push su /system/bin
> adb install Superuser.apk
[/update]
Click to expand...
Click to collapse
I received an error: "failed to copy 'busybox' to '/system/bin/busybox' : No space left on device\"
the same error for the 'su' too
(No space left on device) is impossible, my tab is brand new sealed when i got it.
I have been trying the z4root and SuperOneClick procedure to root this tab but are all unsuccessful.
I am not sure if it is because of my tab needed a "NAND unlock" (I cannot find any guide about the NAND unlock) because I received this message when I tried to install busybox from the market.
Please help! My tab is carrier locked to Bell Canada, I really wanna to unlock it and root it~
Thanks!
gummo6869 said:
I received an error: "failed to copy 'busybox' to '/system/bin/busybox' : No space left on device\"
the same error for the 'su' too,
Click to expand...
Click to collapse
The `no space left on device` message indicates that the /system partition is still read-only. That means the mount command in step 3 was unsuccessful. Did you get any error message when you executed it?
1. How can I root my phone?
1.1 General information/Basic adb-commands
Rooting a phone enables you to do things, which normally aren't possible for the average user like:
- Removing apps which were preinstalled by the provider (like Orange, Vodafone, etc.). My Tattoo had Vodafone apps for buying music and other sh*t, which was installed on the system partition (to which a "normal" user has no rights to write to, including deleting).
The Tattoo was successfully rooted by a bunch of guys here, namely -bm-, mainfram3 and Coburn64 (maybe, I don't remember quite correctly ). Also the Tattoo was the first phone having a security mechanism hindering a user to mount the filesystems as read/write, which had to be overridden by remapping the read only memory region to a read/write one. This is done by the module Tattoo-hack.ko, also made by mainfram3. He also created the first boot.img, which enabled su directly from adb and loading Tattoo-hack directly from boot on.
A few words about adb:
ADB is a tool for communicating from the PC with the mobile phone. For this a service is running on the phone enabling the communication via Terminal Emulator. Here are the most useful adb-commands:
Code:
adb push localFileFromPC /path/on/mobilephone
-> pushes a file "localFileFromPC" to a specified location on the phone
adb pull /path/to/file pathFromPC
-> receives a file from the phone and stores it to "pathFromPC"
adb remount
-> This is only possible in custom ROMs, remounts the file system to r/w automatically
adb shell "command"
-> executes "command" and returns to the computer shell
adb shell
-> opens a shell session on the phone (from here on you have to be very careful! Also you can execute now normal linux commands like rm, mv, ls, chmod and so on, but not cp (this can done through busybox)). You will have to use this more often, so get used to it
1.2 Do I have to create a goldcard?
I read this question quite often. For rooting, you don't need it, but for SIM-locked phones you can't flash custom unbranded ROMs (I think).
A guide to create a goldcard follow this link: http://forum.xda-developers.com/show...88&postcount=1 (thanks to MiSSigNNo to this point)
1.3 Tools you need
A complete set of tools can be found here Feel free to mirror it:
http://rapidshare.com/files/403766494/Tattoo.rar.html
Mirror(s):
http://www.bild-ton.net/Tattoo.rar
http://www.megaupload.com/?d=CI9AW83F
This package contains:
- adb binaries for Windows (sorry Linux users )
- su (Please note: use the su-binary attached in this post, not the one in the archive!!!!!)
- m7 exploit
- Amon_RA recovery.img
- mainfram3 boot.img
- flash_image binary
- tattoo-hack.ko
1.4 The automated way
This method was created by maverixx and can be found here. This basically consists of a package doing everything you need by itself. It roots the phone and flashes maverixx recovery.img, which (no offense) I don't like as much as I like Amon_RA's one!). Just click the batchfile and it does the rest (you have to connect your phone via USB to your PC though ).
If you want to use the automated way, but flashing Amon_RA's recovery, just replace the recovery.img from maverixx' package with the recovery.img provided in my archive file (see 1.3 for the link).
In my time here I noticed quite a few users experiencing problems either with a fully functional su or with the recovery image not flashing certain update.zip packages. It seems to be a matter of luck.
1.5 The manual way (recommended by the author)
I personally like what is done when and how, that's why I recommend the manual way. So let's get down to business Let's see if you know all the adb-commands I wrote here:
1. Let's say you have everything unpacked into C:\Tattoo
2. In your terminal (on your PC) type:
- adb shell "mkdir /data/local/bin" (if it returns an error it means that the directory already exists, just proceed)
- adb push m7 /data/local/bin/
- adb push su /data/local/bin/
- adb push flash_image /data/local/bin/
- adb push tattoo-hack.ko /data/local/bin/
- adb push recovery.img /sdcard
- adb push boot.img /sdcard
3. We have every needed file on the phone now. Type now (we are still in your terminal):
- adb shell
$ cd /data/local/bin
$ chmod 766 m7 (I don't retain this step as mandatory, so if this process fails, just proceed)
$ while ./m7 ; do : ; done
lots of text until you see something like "wrote shell code", press enter 2 or 3 times enter to see:
#
4. Then perform this:
- # export LD_LIBRARY_PATH=/system/lib
- # export PATH=/system/bin
- # insmod ./tattoo-hack.ko
- # mount -o rw,remount /dev/block/mtdblock5 /data
- # mount -o rw,remount /dev/block/mtdblock3 /system
- # cat ./su > /system/bin/su
- # chmod 4755 /system/bin/su
- # chmod 755 ./flash_image
Questions?
1.6 Problems and (hopefully good) solutions
Q: How do I execute my command line tool?
A: On your Windows host, go to Start->Run...->type "cmd"
Q: Where is my adb? When I type it in my shell it says that it was not found!
A: The adb binary is found in the archive I supplied above or in the Google SDK. As my archive-file is quite smaller than the Google SDK you should take mine. Let's suppose your adb binary is unpacked in C:\Tattoo, then type:
Code:
Your\Current\Location> cd C:\Tattoo
C:\Tattoo> adb <command>Q: adb says "error: device not found" when I try to launch the shell on the phone!
A: Connect the phone with the usb cable and make sure the sd card is not mounted as drive on your PC!!!
Q: When I want to copy something the phone returns that "cp" is not found! Also when I try to move a file, it says "cross-link device".
A: Well, copying from one partition to another is only possible either via busybox or via
Code:
cat file > /location/filename
Example:
cp /data/su /system/bin
is realized by typing
cat /data/su > /system/bin/suAlso make sure that system is r/w!!!
Q: flash_image returns write errors when flashing recovery/boot image!
A:
For boot: Try to redo the flash procedure
For recovery: Note that you can't flash the same recovery.img as the one already installed, so install another recovery.img first (like maverixx) and then Amon_RA's again. If it still doesn't work reboot, remount the partitions r/w, insmod tattoo-hack.ko and retry flashing.
Q: How can I unroot my device?
A: Just delete su from /system/xbin and restore the old boot.img. Alternatively see here for retrieving a stock ROM to flash it on your phone.
i hope someone try this i don't have time
Hey all,
I was trying to push nano to my phone and I get this:
C:\>adb push nano /system/bin
failed to copy 'nano' to '/system/bin/nano': Read-only file system
Trying remount:
C:\>adb remount
remount failed: Operation not permitted
Then from ADB shell, I try:
c:\>adb shell
[email protected]:/ $ su
su
[email protected]:/ # mount -o rw,remount /system
mount -o rw,remount /system
[email protected]:/ #
[email protected]:/ # exit
exit
[email protected]:/ $ exit
exit
c:\>adb push nano /system/bin
failed to copy 'nano' to '/system/bin/nano': Permission denied
Any ideas? I'm rooted the superuser and busybox installed.
I rooted using this method:
http://forum.xda-developers.com/showthread.php?t=1956432
Apps get elevated privileges without error. Terminal emulator allows me to view system files. Unfortunately I need to edit some program files in /data/data and there doesn't seem to be any editor available (vi is acting very glitchy). I discovered this problem when I tried to push nano to my phone.
I also tried to access /data using gEditor and it says:
file list
/data
cannot change the directory.
Something is very wrong here. Do I need to re-root using a different method? Please advise. Thanks!
Update: I was able to get adb to work. It turns out I never flashed an unsecured boot image.
However, my nano installation doesn't work and gEditor crashes when I try to access the data folder. That will be for another thread.
For remount and push/pull commands to work, download adbd insecure from playstore . That's the only way you will be able to do the aforementioned commands.
Thanks for the tip. After rerooting the phone with an unsecured image I was able to use adb. I am able to use adb right now without adbd installed however.
Sent from my SGH-T889 using xda app-developers app
I was going crazy allover looking for an answer, and found it here...
Thanks.
Not compatible
teshxx said:
For remount and push/pull commands to work, download adbd insecure from playstore . That's the only way you will be able to do the aforementioned commands.
Click to expand...
Click to collapse
Is there any other option?? That software is not compatible with my android!!
You will have to flash a kernel which has adb secure set to 0.
Sent from my SGH-T889 using xda app-developers app
i'm on (pixel 2xl) lineageos 16.0 rooted with magisk, i want to add a script in init.d folder but i can't do it, i tried with root explorer but it doesn't work, afwall also can't mount folder for startup script, any solution?
lg_g3_d855 said:
i'm on (pixel 2xl) lineageos 16.0 rooted with magisk, i want to add a script in init.d folder but i can't do it, i tried with root explorer but it doesn't work, afwall also can't mount folder for startup script, any solution?
Click to expand...
Click to collapse
Why? What error do you get?
Try to move/copy something into /tmp folder. It should work if you're rooted (your shell shows # instead of $).
If it doesn't work, maybe you have to remount your system as rw (read and write):
Code:
mount -o rw,remount /
after you made your modifications, mount it as ro (read only) again:
Code:
mount -o ro,remount /
If it still doesn't work, we need to see the error you get (copy and paste into this forum) while moving/coping something into /tmp.
User699 said:
Why? What error do you get?
Try to move/copy something into /tmp folder. It should work if you're rooted (your shell shows # instead of $).
If it doesn't work, maybe you have to remount your system as rw (read and write):
Code:
mount -o rw,remount /
after you made your modifications, mount it as ro (read only) again:
Code:
mount -o ro,remount /
If it still doesn't work, we need to see the error you get (copy and paste into this forum) while moving/coping something into /tmp.
Click to expand...
Click to collapse
i tried with mount -o rw, remount, but it keeps showing me the file system is read only
.
lg_g3_d855 said:
i tried with mount -o rw, remount, but it keeps showing me the file system is read only
.
Click to expand...
Click to collapse
Can you verify you entered that command as root?
Please do the following:
Do this on your computer to enter your devices shell
Code:
prompt_PC:~$ adb shell
Code:
prompt:~$ whoami
This should give you either "shell" or "root"
If it says "shell" do:
Code:
prompt:~$ su
prompt:~#
It will show a # instead of $ if you're root.
If you're already root (or you are now root due to su command), do:
Code:
prompt:~# mount -o rw,remount /
Now it should be writeable and you can do your modifications.
After you finished you need to change it to ro (read only) again:
Code:
prompt:~# mount -o ro,remount /
After that you can exit the shell:
Code:
prompt:~# exit
prompt:~$ exit
(first exits su, second exits shell)
I'm sorry if you already did that but I wan't to be sure you did it correctly.
If this procedere doesn't work, please copy and past your input and output into this forum as this might help to understand what's going on/failing etc.
User699 said:
Can you verify you entered that command as root?
Please do the following:
Do this on your computer to enter your devices shell
Code:
prompt_PC:~$ adb shell
Code:
prompt:~$ whoami
This should give you either "shell" or "root"
If it says "shell" do:
Code:
prompt:~$ su
prompt:~#
It will show a # instead of $ if you're root.
If you're already root (or you are now root due to su command), do:
Code:
prompt:~# mount -o rw,remount /
Now it should be writeable and you can do your modifications.
After you finished you need to change it to ro (read only) again:
Code:
prompt:~# mount -o ro,remount /
After that you can exit the shell:
Code:
prompt:~# exit
prompt:~$ exit
(first exits su, second exits shell)
I'm sorry if you already did that but I wan't to be sure you did it correctly.
If this procedere doesn't work, please copy and past your input and output into this forum as this might help to understand what's going on/failing etc.
Click to expand...
Click to collapse
yes I'm root, output is file system is read only despite adb commands
lg_g3_d855 said:
yes I'm root, output is file system is read only despite adb commands
Click to expand...
Click to collapse
Well, I'm sorry then... I can't help.
Good luck!