This post was edited by vishalraj08 at 13:13, Jan-02-2015
Presenting the Ultimate Android Lag remover, Performance & battery improvement script. BUILD 4 RELEASED (04.jan.2015).See attachment for download!!!
Features:
*** Super Fast Performance
*** Best battery Life
*** Custom Entropy Engine
*** Superb Gaming Performance
*** Awesome Responsiveness
*** Super Slim & not messy like other scripts just Flash & enjoy
*** No command needed
Features:
*** Super Fast Performance
*** Best battery Life
*** Custom Entropy Engine
*** Superb Gaming Performance
*** Awesome Responsiveness
*** Super Slim & not messy like other scripts just Flash & enjoy
*** No command needed
Compatibility:
*** Any Stock ROM
*** Any AOSP Based ROM
*** Any Cyanogenmod, PAC, Paranoid, Omni or any other ROM
Instruction:
*** Reboot Into TWRP
*** Wipe Cache & dalvik cache
*** Flash
***** This is intended to improve performance for any android device & is free to use but do everything at your own risk. I'm not responsible for any damage or bricked device or any other damage though there is no possibility to happen something like that *******
Changelogs:
Build 4(04jan.2105) : -FIX BATTERY DRAIN AND HEATING PROBLEM ON SOME DEVICES
-NEW ENGINE FOR BATTERY SAVING
-NOW ALSO SUPPORT FOR MI3
-REMOVE BACKGROUND KILLING APPS CONTINOUSLY
-NO ISSUES NOW
NOTE: BUSYBOX AND INIT.D SUPPORT MUST REQUIRED
Bulid 3 :29 dec 2014 (v2) (change log)
- FIX HEATING ISSUE AND MUCH MORE
- Android performances improved at 360°
- Radically improved management ram on android (Lags...adios!)
- Script lightweight and revised to be adapted to this engine
- Improves a lot the graphics: of course Pure Graphic™HD,
- Scan multimedia time drastically reduced
- Network Improvements, 3G experience even in 2G modality
- All SQlite database optimized
- Enable hardware features turned off by default for a better experience on entry level devices
- Greatly increases the score AnTuTu: Try it to believe it!!
- Reduces the startup time of Android
- Allows you to play ported games without lags
- Cleans the system every 24 hours, thecache every week and the Dalvik every month (cronos easter egg)
- Automatically Zipalign on each boot (sensitive to the use
- Drastically decreased the drainage of battery
- Check the activities that consume too much battery stop them with PureWakelocks™
- When the phone is charging reduces system services for faster charging
- The battery is calibrated on every boot
- Disable animation of the system when the battery is nearly exhausted
- Improvements in build.prop as regards the part of consumption
- Enables a non-aggressive dithering to save CPU
- When you lock the device, the engine makes sure that the GPU is turned off
- Enables deep sleepalso in the bugged rom
- Generates video entropy (like seeder)
- Slightly improves the scaling of the frequencies (for better results you need a good kernel)
- Lightens the load on the CPU switching the workload to GPU rendering
*** Build 2:
- added Some Tweaks to Improve performance
- More smooth & more battery!!
*** Build 1:
Initial Release
***Downloads are in attachment***
only for stock miui v45
only for cm11 based rom
uninstaller for bulid-4
uninstaller of build-3(old)
XDA:DevDB Information
project Redmi 1s updated 4 jan 2015, Tool/Utility for the Xiaomi Redmi 1S
Contributors
vishalraj08, vishalraj08, vishalraj08, vishalraj08
Source Code: http://en.miui.com/thread-70623-1-1.html
Version Information
Status: Stable
Created 2014-12-26
Last Updated 2015-01-04
You put together a colection of scripts w/o optimize to Redmi 1s. Try a little to refine the scripts and post again. And is NOT your ONLY contribution!
Hows the battery life?
Eziogamer said:
Hows the battery life?
Click to expand...
Click to collapse
I get 5 .39 hrs screen time at 1.6 clock speed
vishalraj08 said:
I get 5 .39 hrs screen time at 1.6 clock speed
Click to expand...
Click to collapse
On which ROM? ()
vishalraj08 said:
I get 5 .39 hrs screen time at 1.6 clock speed
Click to expand...
Click to collapse
on which rom?
Eziogamer said:
on which rom?
Click to expand...
Click to collapse
Miui v45
vishalraj08 said:
I get 5 .39 hrs screen time at 1.6 clock speed
Click to expand...
Click to collapse
Trust me, i got more than you without underclocking cpu.
so after flashing the script battery life has improved right? so what about the heating isuue? its gone?
zTweaked said:
Trust me, i got more than you without underclocking cpu.
Click to expand...
Click to collapse
Nice man
Eziogamer said:
so after flashing the script battery life has improved right? so what about the heating isuue? its gone?
Click to expand...
Click to collapse
Bro dont be so confused it is totaly solution for redmi 1s
Heating is gone, lag is gone ,low ram is gone ..... Everything is smooth
I am using Laceup rom,after flashing this zip also the mobile heating.
Pls anyone tell some tips to reduce heating and what i have to do to have better performance in playing high graphics games
Does it works for all devices.
Can i try it on my mi3..??
Hey..... New version is now available
New script is rocking now
please provide uninstaller
how to install on stock rom without CWM
how to install this script on stock rom 43 without CWM
miljic said:
how to install this script on stock rom 43 without CWM
Click to expand...
Click to collapse
use flashify or flash Gordon .Google for more info.
it has a major bug....i installed on carbon rom rc5..At first my battery charge was aroung 95%..After flashing it decreased to 60%..I thought it may be solve after wiping cache & dalvic cache...So i wiped it....But again decreased to 0%,then 7%......What the hell is that ?? u said that heating issue is solved but without using any app my phone heated around 35 degree.....
Check the screenshots which is taken with 2 min. difference............
sumitsrk123 said:
it has a major bug....i installed on carbon rom rc5..At first my battery charge was aroung 95%..After flashing it decreased to 60%..I thought it may be solve after wiping cache & dalvic cache...So i wiped it....But again decreased to 0%,then 7%......What the hell is that ?? u said that heating issue is solved but without using any app my phone heated around 35 degree.....
Check the screenshots which is taken with 2 min. difference............
Click to expand...
Click to collapse
hey why do you want to use this on carbon rom? Simply underclock your rom and Theirs no issue and still if its their then shift to mokee its the best custom rom for redmi 1s till now.
alok932 said:
hey why do you want to use this on carbon rom? Simply underclock your rom and Theirs no issue and still if its their then shift to mokee its the best custom rom for redmi 1s till now.
Click to expand...
Click to collapse
Just For Testing Purpose if it is working or not as @op Says............
Related
CleanDROIDFollowing on from my WM 6.5 ROMs for the HD2, I now present my first NANDroid ROM. Built for speed, space and maximum customisability to be decided by you - the users!
Main Features:
- Extreme speed and responsiveness
- Froyo 2.2.1
- CyanogenMOD 6.1.1
- ADW Launcher
- Standard Framework
- Ultra Tiny, 320mb free space after flash on Euro HD2
- Gingerbread Keyboard
- LCD Density is 190 for the true HD look
- Custom initrd for performance
- Custom kernel for max performance and battery life
The ROM is small because it is stirpped of all Google applications and varoius other features, such as wallpapers. No wallpapers are supplied other than the one it comes with so you must provide your own. Everything that has been removed is freely available from the Market, so you can choose what you want and nothing is forced upon you
The ROM is completely rooted and SU is working correctly so you will easily be able to change animations, framework, system APKs etc
Installation:
MAGLDR 1.11 or greater required, Radio 2.12.50.xx is reccommended. Load phone in MAGLDR menu mode, select USB flasher. Connect phone to PC with USB cable (allow it to install drivers if necessary) and flash the ROM with the supplied DFT flasher. Its that simple
Kernel changelog + Download + GPL compliance information:
Kernel : GL_Core_v5b
Built from latest master GIT git://gitorious.org/linux-on-wince-htc/linux_on_wince_htc.git
OC 1190/1536mhz added to acpu file, Added IO optimisation sourced from hastarin, Added latest YAFFS + cpufreq drivers from tytung GIT.
The kernel code is not modified in any way from what is available on the below linked repositories + patch file, the only difference being the custom build configuration. All credits for kernel modifications go to hastarin, tytung, cotulla, DFT, markinus and anyone else listed as contributing on the commit list and changelogs
- Latest Patches
- Automatic overclock scaling up to 1190mhz / 1536mhz
- Interactive governor as default
- No Undervolt 1190, No undervolt 1536 and Undervolt 1190 kernels availbale
- Reverted to no-op (better IO performance)
- Reverted to SLUB (better system latencies)
- Added htcleo.board.c tweaks from hastarin
- EXT 2/3/4 support
- Added netfilter for WiFi tethering support throught 3rd party apps
- Fixed 60ma after call drain
- Fixed LED notifications
- Pulled latest commits and rebuilt
- Improved compatability for more devices with Undervolt_1190 and 1536mhz kernels
- Slight performance increase over v4
You can download the complete patch set i use here http://htcfanboys.com/CleanEx/Kernel/KERNEL PATCH.7z
You can download a complete ready to use build for other roms and chefs to use here http://htcfanboys.com/CleanEx/Kernel/DISTRIBUTION KERNEL.7z
Download:
NAND DFT FLASH >> http://htcfanboys.com/CleanEx/CleanDROID 2.55.7z
Build info
~~~~!!!! IMPORTANT - READ !!!!~~~~
From now on, the rom .7z you have downloaded will contain 3 boot.img files. Choose which one you want to try and delete the other two, then rename the one you have chosen to "boot.img", then flash. If you have windows set to auto hide file extensions (99.9% people do) renaming the file to "boot" will be sufficient, otherwise it will end up being called boot.img.img and DFT wont see it!
The three choices are:
- 1190mhz No Undervolt (most stable)
- Undervolt 1190mhz (battery saver - might not work on all devices)
- 1536mhz No Undervolt (Will consume more battery, but faster, compatible with most devices)
Changelog: v2.55
- Ditched undervolting for all but 1190 kernel (for battery saving)
- Added 1536mhz kernel, will work on most devices but use more battery
- Kernel voltage changes should fix FC for everyone whose phone can handle the undervolt 1190 / 1536 kernel
- Flash keep data supported from 2.51/2.50
Changelog: v2.51
- Kernel changes, increased min voltage on UV kernels
- More devices (almost all) should work with UV1190 and UV1305 kernels
- Some minor tweaks
- lil bit faster
- Battery drain should be improved
Changelog: v2.50
- Added 3 different boot.img files to archive (see above)
- Pulled latest commits from GIT, kernel patches and updates
- Rebuilt rom, stability improved
- Updated to CM 6.1.1 from stock Desire build
- INIT changes for uber fast booting
Changelog: v2.02
- Fixed LED notifications
- Several kernel changes for performance
- Switch to interactive governor for better battery life and improved IO
- INIT changes to decrease boot time slightly
- Added SMU (super mega ultraness)
- Reduced by 2mb
- Fixed netfilter and 60ma after call drain
Changelog: v2.00
- Totally rebuilt from the ground up from latest stable Desire CM build
- Completely removed compcache service for more performance
- Smallest build yet - 321mb free on euro HD2!
- Newer custom kernel + accompanying INIT
- Fastest ROM yet!
Changelog: v1.40
- fixed the broken apps to SD feature
- recompiled kernel with latest GIT commits
- tweaked kernel, rom now more responsive, less battery drain, fixed various issues
- fresh flash required
(old changelogs removed)
Additional Info!
Attached to this post is the "LiveWallpaperPicker.apk" install it to be able to set your homescreen wallpaper to any live wallpapers you may have installed
Also attached is GenieWidget for those that want the standard news+weather widget (which is rubbish IMO)
---------------------------------------------------------------------------------------
Credits and Thanks
OCM7, Fadzy, JoPlayer, The_Scotsman, Jan-Willem, Cotulla, Bepe, DFT team and anybody i have forgotten!
FAQ
Q: How to change homescreen dpi?
A: Install Ted (text editor) from market and edit your build.prop or use LCD Density from market.
Q: I have problem with resolution in games.
A: Uncheck compatability mode in spare parts and reboot.
Q: How to keep all the app and settings of the old version?
A: Use MyBackup Pro from Market.
Q: When will FM radio work?
A: When i can get it to work - thats why it has been removed
Q: How to activate battery %?
A: Go to Settings/CyanogenMod settings/user interface/status bar/then click battery %
Q: I'm noticing more battery drain than usuall.
A: You will need to drain/recharge battery before you get full life expectancy out if it - just like any flash.
Q: If you completely run down the battery, would you be able to charge it with the phone again?
A: If your battery is dead, press and hold Vol Down and plug in USB cable / charger at same time. Phone will boot into bootloader and charge there just fine. Leave for 20 mins, pull battery, reboot and charge normally. If phone has just run down, plugging in the charger will usually turn it on.
Q: does it has htc sense?
A: No.
Q: Screenshots?
A: No need, its standard Froyo with ADW launcher
reserved for later use 2
yayy first!!!
Sorry, I hate people who do that but couldn't resist
Sounds interesting, gunna give this a try later, thnx bud, will report any bugs/issues I fine
yayyy, i'm 2nd..lol...me too, fooking hate it, so couldn't resist...downloading - will report back,,,fanks
Cool, i think that when it's not sense, it should be a cyanogenmod
Don't mind making an SD version, for those that are on Windows Phone 7? That would be awesome.
print screens pls?
Yay! Are the pillars of winmo ROM cooking migrating to Android NAND. Not a surprise at all everyone seems to be jumping on the bandwagon. I won't be surprise to see Dutty Throy, Kwbr and the likes here.
lenarass said:
print screens pls?
Click to expand...
Click to collapse
no need, its standard Froyo with ADW launcher
Can u post the gapps please ? that will be great.. or like mdeejay in his builds when i logged in into market he ask me what i want to install...
seavers11 said:
Can u post the gapps please ? that will be great.. or like mdeejay in his builds when i logged in into market he ask me what i want to install...
Click to expand...
Click to collapse
all of the apps removed are freely available in the MArket, no need to post them when you can get them from there. You dont need any special ones or anything, whats available in market will work just fine
I removed them because not everyone for example will want Google Voice, or Youtube, or Voice Search............ this way you can choose your own preference.
look good from your feature list
i'm downloading and will try
but
is it data.img, App2SD or data2Ext?
Thnx this is all i need will try it tonight and report back
sent from my HD2 Android
seavers11 said:
when i logged in into market he ask me what i want to install...
Click to expand...
Click to collapse
it's a cyanogenmod 7 (gingebread) feature, if i'm not mistaken
kernelbase said:
look good from your feature list
i'm downloading and will try
but
is it data.img, App2SD or data2Ext?
Click to expand...
Click to collapse
standard NAND and the standard Froyo Apps2SD functionality.....bit it is small so you get lotsa space...
Hi .Does this build support the HTC official extended battery? Thanks.
luffyp said:
Hi .Does this build support the HTC official extended battery? Thanks.
Click to expand...
Click to collapse
honestly......i dont know. The kernel is not mine. Regardless, any ROM will work with the extended battery, its just your battery reporting will be all screwey
which screen with green logo goes off and appear a black screen with a green logo and 2 antennas of it flashing around without something happening ?
what should i do ?
is tmous friendly? does mms work?
ct9 said:
is tmous friendly? does mms work?
Click to expand...
Click to collapse
yes, and yes #(i cannot test MMS because im in the uk but its working on OCMs build so should work on mine)
SORRY, This ROM I have no more work to do, I hope you enjoyed it and I'm sorry to leave, because it was my first ROM, thanks
This ROM I have no more work to do, I hope you enjoyed it and I'm sorry to leave, because it was my first ROM, thanks
READ!!!
ME AND THE FORUM WE ARE NOT RESPONSIBLE FOR ANY BRICK, BOOTLOOP, SD CARDS DEATH, OR WAR TERMONUCLERARE, IF YOU HAVE PROBLEMS I AM HERE TO HELP, NOT JUDGE MY WORK THIS BAD, WE HAVE PUT TIME AND PASSION.
INTRODUCTION
Hello to all forum
Here is the BDITA ROM, As promised the ROM was published, this ROM has been tested on the Galaxy S3 Neo (GT-I9301I), you are not sure if it will work on the Galaxy S3 Neo (GT-I9300I), having said that, this ROM is very powerful, and has a battery life greatly improved.
BEST FOR:
-Gaming
-Battery
-Performance
-RAM
-WiFi
-3G
-Signal
-System Performance
-System Stable
-60FPS for many Games
-Camera Quality
-Video Quality
-System Fast
-TouchScreen
Finish
INSTALLATION
ClockWorkMod and TWRP
To install this ROM, you must have installed the ClockworkMod Recovery or TWRP!
TWRP
CWM
NOW YOU HAVE INSTALLED THE CLOCKWORKMOD or TWRP!!!
Now we look at the installation of the ROM
BDITA ROM
INSTALLATION:
-Go in Recovery (Volume + button, button Central, Power Button)
-Wipe Data
-Wipe Cache
-Wipe Dalvik Cache
-Flash ROM
-Reboot System
-Again, go into recovery
-Flash Gapps
-Reboot System
NOW YOU HAVE INSTALLED THE ROM BDITA !!!
If you like my ROM, and if everything goes well press the button "Thanks"
Do you like my work, Donate to me, to this e-mail -> [email protected] Thanks
For information write below
DOWNLOAD ROM
BDITA ROM S3 NEO
DOWNLOAD GAPPS
Next Release:
---
ChangeLog:
04/07/2015
*More Stable
*170Mb !!! Size
*sev3n1985 kernel -> Thanks To @sev3n1985
*Slim version removed
*Script for graphics libraries
*Tweak for Battery Life
*Overclock GPU 550MHz thanks to @sev3n1985
*Framework Updated
*Removed some Lag
*Best Audio
01/05/2015
*Based on Final Cm11 Thanks to @Rox
*More Tweak
*Improved stability
*mproved brightness
*Free RAM
*Battery life improved
*Nova Launcher
21/04/2015
*Improved Framework
*WiFi,3G,Signal, and Bluetooth Improved
*System Improved
*Tweak for Build.prop and Init.d
*GPU Tweaks and Improved
*Governor Tweaks
*Improved management of RAM
*Improved Battery
*Improved DeepSleep
*CPU Tweaks
09/04/2015
*Framework Completely Changed
*Now is the real BDITA ROM
*Many CyanogenMod App reinstalled
*Many Lag Removed
*Fluidity Improved system
*Script for some games Gameloft
*60 FPS forced, for some games
*Improved battery life
*Improved management of RAM
*Many Tweak init.d
*BDITA App
*BootAnimation Improved
*Improved Framework
*German language Fixed
*CMAccount Changed
*BootAnimation Fix
30/03/2015
*ChompSMS -> YATAA Removed
*Vanilla Browser -> Exsoul Browser Removed
*Gamer Boost
*SD Speed Tweak
*Logger Removed
*Better Gaming
*Zipalign
*Lag Reduce
*SQLite
*Build.Prop and Init.d Tweak
*High Speed Performance
*Multitasking
*High Life Battery
*Eliminate Some Lag System
10/03/2015
*Sys UI HW Persistent
*Power Supply
*Sensor Sleep Controll
*Removing Noise Speaker And Heaset
*Panorama Frame Res (FullHD)
#*WiFi Connect Speed Tweak
*Faster DNS
*Activated HSUPA
*ppp0 Interface DNS
*Protect Against SYS Attacks
*Avoid Time-Wait
*Block Redirects
*Block Source-Routing
*IPv4 Tweaks
*Just-In Time Compiler
*Dalvik JNI Checking
*Dalvik Bytecode Verification
*Disables I/O Stats
*Scheduler Systctl Tweaks
*Disable Vsync
*Disabile Sleepers
*Surface Dithering
*Kernel JNI Error Checking
*Android Logger
*Optimize Sqlite3 Databases
*Internal SD-Card I/O Tweaks
*External SD-Card I/O Tweaks
*Battery Saving
*Camera Quality Tweaks
*Flashed Tweaks# -> thanks to Pimp My ROM
*Bravia Engine V3.
07/03/2015
*Release
Bug:
*NFC does not work
*Bug Flash ->
-
-> some users happened to have this BUG, to resolve this problem, install this ZIP from recovery
*Camera Fix -> if the camera does not work, download this FIX, and install it from recovery - Thanks To ROX
GLTools Setting;
1) Select an application
2) Now put these settings ->
->
Kernel Tweaker Setting:
1) Go to Extra, and go on init.d ->
2) Enable all boxes ->
3) Go to Extra, and go on Build.prop ->
4) Enable these boxes ->
Developer settings : Settings -> About phone -> press Build number 7 times
3-Way reboot: go to Developer settings and select "Advanced reboot"
Credits:
Thanks To ROX for developing the CyanogenMod
Thanks To Linuxiano85 for the speakerphone volume low
Thanks To Jurgen Taipi for having tested my rom
Thanks To tanzkie23 for having tested my rom
Thanks To ravikanthchary for having tested my rom
Thanks To varghesejjj for having tested my rom
Thanks To Malvosarco9 for having tested my rom
Thanks To kralkral for having tested my rom
Thanks To Shamvu for having tested my rom
Thanks To Scarfangs for having tested my rom
Thanks To venkovi for having tested my rom
SCREENSHOT:
Danny_Dewet said:
Hello forum, I would make you my ROM BDITA for this amazing device, the ROM was made for HP Slate 7 Plus, and now will be made on the Galaxy S3 Neo (GT-I9301I).
*For any questions and information, write down here.
*The ROM will be posted on another thread.
Sorry for my Bad English
Thanks
Click to expand...
Click to collapse
Any Screenshots ?
ravikanthchary said:
Any Screenshots ?
Click to expand...
Click to collapse
No is under development, however, is based on CyanogenMod
It will be very performant
ravikanthchary said:
Any Screenshots ?
Click to expand...
Click to collapse
This is the other rom developed by me: http://forum.xda-developers.com/showthread.php?t=3046962
Danny_Dewet said:
No is under development, however, is based on CyanogenMod
It will be very performant
Click to expand...
Click to collapse
cm is fast enough we need cm speed with better battery life
i hope your rom will have good battery life
In fact, I point on battery life, and also on performance in the field of gaming
Thanks
kralkral said:
cm is fast enough we need cm speed with better battery life
i hope your rom will have good battery life
Click to expand...
Click to collapse
Hey guys, I'm trying my ROM, and is the best ROM for the Galaxy S3 Neo (GT-I9301I).
plz make it availavle for I9300I also
Shamvu said:
plz make it availavle for I9300I also
Click to expand...
Click to collapse
In theory, it should work on GT-I9300I
ScreenShot!!!
Nice
Danny_Dewet said:
This is the other rom developed by me: http://forum.xda-developers.com/showthread.php?t=3046962
Click to expand...
Click to collapse
Its a great work.
I dont like lollipop. Kitkat perfom better. Maybe one good cm rom will be nice.
Can you implent some kernel futures like this phone Xaiomi red 1s. It got the same cpu and motherboard. --> http://www.gsmarena.com/compare.php3?idPhone1=6433&idPhone2=6373
Kernels --> http://forum.xda-developers.com/showpost.php?p=56103343&postcount=4
In section kernel.
Thanx i will like to see your work.
good news for cm11 lovers!
Danny_Dewet said:
Hey guys, I'm trying my ROM, and is the best ROM for the Galaxy S3 Neo (GT-I9301I).
Click to expand...
Click to collapse
No its not. There is no "best roms".
Laurisss said:
No its not. There is no "best roms".
Click to expand...
Click to collapse
For you
Laurisss said:
No its not. There is no "best roms".
Click to expand...
Click to collapse
It seems like cm11,and for now thats a solution becose of the instability and general problems of cm12. Having a kitkat development should be great. I tried cm12 for a month but it seems like for the moment cm11 is quietly better. Thats obvious,cm11 is a out form a year and development are in a good stage now. Hope your rom will roon smooth. I'm very excited about that. Keep up the good work,we're wayting for you
Greets
a cm11 with battery improved would be simply perfect...
Danny_Dewet said:
This is the other rom developed by me: http://forum.xda-developers.com/showthread.php?t=3046962
Click to expand...
Click to collapse
is this ported rom or based on @Rox cm11 ?
Yeah
*Improves audio and video recording
*Faster streaming videos
*Video Accelleration and HW debugging
*Disables built in error Reporting
*Better NET speeds
*Saves Power
*3G Tweaks
*3G Fast
*Disables LogCat
*Support for Ipv4 and Ipv6
*Better Scrolling
*Better signal
*Better Call voice quality
*Faster Boot
*Disables error checking
*Disables sending of usage data
*More volume steps in call
*GamerZRom Tweak
wetito said:
good news for cm11 lovers!
Click to expand...
Click to collapse
Danny_Dewet said:
Yeah
*Improves audio and video
*Faster streaming videos
*Video Accelleration and HW debugging
*Disables built in error Reporting
*Better NET speeds
*Saves Power
*3G Tweaks
*3G Fast
*Disables LogCat
*Support for Ipv4 and Ipv6
*Better Scrolling
*Better signal
*Better Call voice quality
*Faster Boot
*Dissbles error checking
*Disables sending of usage data
*More volume steps in call
*GamerZRom Tweak
Click to expand...
Click to collapse
If this rom works on my mobile I9300I..
Then i will make this ROM Like REAL XPERIA Z3
Danny_Dewet said:
Yeah
*Improves audio and video recording
*Faster streaming videos
*Video Accelleration and HW debugging
*Disables built in error Reporting
*Better NET speeds
*Saves Power
*3G Tweaks
*3G Fast
*Disables LogCat
*Support for Ipv4 and Ipv6
*Better Scrolling
*Better signal
*Better Call voice quality
*Faster Boot
*Disables error checking
*Disables sending of usage data
*More volume steps in call
*GamerZRom Tweak
Click to expand...
Click to collapse
When will it be available?
This kernel is what i use personally and i'm just sharing it for anyone who wants a stable kernel with good battery.
THE LIGHT WEIGHT KERNEL
DOWNLOADS :
LWK-i9500 Folder
[ Do Not Mirror! ]
Code :
GCM : For CM13
RR : Resurrection Remix
NOTE : WIPE APPDATA OF YOUR KERNEL APP BEFORE FLASHING !
USE GEAR/TWRP RECOVERY TO FLASH THE KERNEL.
Bugs/Workarounds :
* Rarely Random Reboots can occur.
Sources : Github
Latest
Credits :
* Andreilux (For many things)
* Voltaqe (always helpful)
* halaszk (LMK Optimisations)
* Alberto96 (f2fs support)
* MemAllocatoR (vibration control)
* jwchen (occasional compiling)
* arter97 ( lazyplug )
* and many others
CHANGLOG :
* Just check my github !
It looks promising , I hope to see more features coming for this kernel in future. Keep up the good work bro
Great job mate!??
Woow good to see our i9500 have new kernel.. Waiting for more features.. Hope you can make for kitkat too sir.. Lol
thank you so much and i hope this little project gets bigger and bigger good luck mate
Noriyuki_Fariz said:
Woow good to see our i9500 have new kernel.. Waiting for more features.. Hope you can make for kitkat too sir.. Lol
Click to expand...
Click to collapse
You have the PERFECT kernel for kit Kat a.k.a. Perseus ( is it not available ? Rom switcher uses it )
asad007 said:
PS:
=> This kernel DOES NOT support init.d ( yet )
=> I am still learning , Help is always welcome
Click to expand...
Click to collapse
As far as I try, I can't make init.d support for enforcing samsung official LP OA7 to work by editing its ramdisk.
Even using term-init.sh for universal init.d enabler on official rooted OA7 enforcing and prism barebone enforcing, will not work.
Have u tried to enabled it but fail?
I think, maybe becoz your kernel boot at enforcing state.
If you completely remove enforcing and set permissive or disable selinux only, its different story
I'm sorry for my bad english.
If I disable selinux , the kernel would not boot ( I tried doing that ) so I'll see what I can do about booting in the permissive mode itself
And then maybe the code for init .d in the ram disk may work :thumbup:
asad007 said:
You have the PERFECT kernel for kit Kat a.k.a. Perseus ( is it not available ? Rom switcher uses it )
If you want I can compile from Perseus kit Kat sources but that would not be my work ( Perseus is the best kernel so far )
Click to expand...
Click to collapse
Yeah i know it sir thanks to Andrei.. But 1 problem is with v19.1 alpha tethering not detected in other device.. I only hope it will fixed soon by Andrei or by other dev.. And Romswitcher v3.1 still need more features i think like zram so swap will work too..
OP updated with second release
changelog :
using LZO compression instead of XZ , kernel is heavier but execution is faster (eg; booting time is less) also this should fix the high battery drain
Kernel boots as permissive
PS:
1) The code in the init.rc does not get executed for init support ( ill work on it soon after my exam in a day or two )
2) Please test the battery life and performance on this one
Thank You
What are the two frequencies available?
The min and max
BTW I found that on some apps the frequency can't be set
For example in aero control you can't set frequency but you can use memory tweaks like ksm on it
On the other hand in no frills you can use only min and max frequency
While on cpu tuner you get three frequencies min , max and 600Mhz
It's your call mate what you want
asad007 said:
The min and max
BTW I found that on some apps the frequency can't be set
For example in aero control you can't set frequency but you can use memory tweaks like ksm on it
On the other hand in no frills you can use only min and max frequency
While on cpu tuner you get three frequencies min , max and 600Mhz
It's your call mate what you want
Click to expand...
Click to collapse
Battery backup seems to be promissing... but after 45min of usage when i clicked the app drawer it got rebooted. pls add LUCurative or smartassv2 governer and init.d support.
---------- Post added at 01:09 PM ---------- Previous post was at 12:48 PM ----------
itsme12345 said:
Battery backup seems to be promissing... but after 45min of usage when i clicked the app drawer it got rebooted. pls add LUCurative or smartassv2 governer and init.d support.
Click to expand...
Click to collapse
Also cpy spy dont show up the frequency usage it says kernel not supported. pls look that also.
---------- Post added at 01:30 PM ---------- Previous post was at 01:09 PM ----------
Second reboot...
^ That is because I removed debugging stuff to make the kernel lighter If I add it ,size would grow (let's see)
What would be cause of reboot...may be ram issue..
Have Stweak support?
THANK YOU SO MUCH <3 I have been dying and searching for a good KERNEL since the stock drains battery just when the screen is turn on for even 5 mins
THANK YOU SO MUCH MAN REALLY APPRECIATE IT
OP updated ,
Minor Update , Not much of a changelog present ( just minor changes here and there )
Second post updated with Touchscreeen sensitivity tweak ( this is a must , it makes the whole interface buttery smooth )
and some battery saving defaults ( cause at the end of the day , battery is all that matters)
Hi guys, I've been working on these for a long time and now finally managed to find best configuration and fix all bugs.
I edited one by one and, after months of hard work, this got where is now
-Battery
-Balanced
-Performance
They do what their name suggest
They tweak:
-Cpu Interactive tweaks(modded by me)
-Battery one will use lowest voltage frequencies
-sysctl
-disable Zram on Battery
-Entropy
-Gpu
-Thermal configs
-sysconfig tweaks(to save battery on deepsleep)
-I/O
-and some in-build configs to kernel
HOW TO INSTALL:
-Make sure you have Magisk v15+ installed
HOW TO UNINSTALL:
-Go into magisk app, click on Modules. Then uncheck F.u.c.king-Tweaks module and click on trash icon. Reboot
Download Link:
https://androidfilehost.com/?w=files&flid=264755
If u want to suggest something or have a question, ask me on Telegram (@Characteress)
Works for Zui ? . .
vladimir.jz said:
Works for Zui ? . .
Click to expand...
Click to collapse
Yup. BTW, this build for battery have deepsleep issues. I'm testing a fix for it already.
Balanced and Performance are working great already.
Links updated !
Hey guys! Finally FINAL Version for all of them!!!
Thanks for everyone that tested and helped me doing this tweak.
You can use on all ROMs for Zuk (should work on all SD820 devices but need test)
Issues fixed:
-Deepsleep(was the only bug left btw)
Added thermal mods to all of them, Sun-Cooling to Battery and Balanced one, and Tweaked FSC-Thermal for Performance.
PS: FSC-Thermal is a thermal mod created by Korom42 for Xperia XZ. I ported it and edited some lines(changed sensor too).
LINKS ARE ON FIRST POST(Thread topic message)
hi all,
anyone compare this tweaks vs helix-engine? which one better?
by using this tweaks , i assume whatever rom we are using right now, will have same result for benchmark and battery backup?
Would this also force Doze on Google Play Service? Im using sysconfig patcher on magisk rn and it might conflict with this, so I wanna make sure I can remove that without any downside
This tweak is better
locolyric said:
hi all,
anyone compare this tweaks vs helix-engine? which one better?
by using this tweaks , i assume whatever rom we are using right now, will have same result for benchmark and battery backup?
Click to expand...
Click to collapse
This tweak is better than Helix engine i personally tested both of them and compared this tweak is better and I am using bootlegger rom with stock bfrv3 kernel
---------- Post added at 01:53 AM ---------- Previous post was at 01:50 AM ----------
pipyakas said:
Would this also force Doze on Google Play Service? Im using sysconfig patcher on magisk rn and it might conflict with this, so I wanna make sure I can remove that without any downside
Click to expand...
Click to collapse
I don't think this tweak will force doze on play service you can remove sysconfig patcher and instal enable doze for gms
Magisk module i am using both modules with no problem
New update is up!
Hi guys, if you follow my projects you know that Sun-Cooling has been updated to v2.2 so I updated Battery and Balanced too.
Performance tweak doesn't need to be updated anymore, as reached it's maximum(maybe I update and spend some more time on it when I have time)
Changelog:
-Changed frequency table on both(they should be more smooth now)
-Added Sun-Cooling v2.2 on both
Download Link:
https://androidfilehost.com/?w=files&flid=264755
Deleted
satyen_ said:
Deleted
Click to expand...
Click to collapse
Access denied fixed. Sorry for the incovenience
Hi, quick question, How's this different from the Sun-cooling mod that you have? Because this seems to have all of the features in that plus some more. Which one do I choose?
kishore1998 said:
Hi, quick question, How's this different from the Sun-cooling mod that you have? Because this seems to have all of the features in that plus some more. Which one do I choose?
Click to expand...
Click to collapse
Hi. So, this tweak is supposed to change a lot of things, I just decided to add Sun-Cooling on it too. In case you want tweak the whole system, flash this. If u want stock configs but only thermal mod, flash Sun-Cooling.
characteres said:
Hi. So, this tweak is supposed to change a lot of things, I just decided to add Sun-Cooling on it too. In case you want tweak the whole system, flash this. If u want stock configs but only thermal mod, flash Sun-Cooling.
Click to expand...
Click to collapse
Awesome. Thanks for letting me know.
characteres said:
Hi. So, this tweak is supposed to change a lot of things, I just decided to add Sun-Cooling on it too. In case you want tweak the whole system, flash this. If u want stock configs but only thermal mod, flash Sun-Cooling.
Click to expand...
Click to collapse
Buddy i have flashed sun cooling
Want to flash this battety mod
If i flash does the overrite sun cooling
And i f i remove this mod does sun cooling which i flashed easier also be gone ??!!
I tested these and these tweaks are effective. But i can't keep them installed as of now as i have to switch between modes frequently and flashing everytime is not an option for me.
characteres said:
Hi guys, if you follow my projects you know that Sun-Cooling has been updated to v2.2 so I updated Battery and Balanced too.
Performance tweak doesn't need to be updated anymore, as reached it's maximum(maybe I update and spend some more time on it when I have time)
Changelog:
-Changed frequency table on both(they should be more smooth now)
-Added Sun-Cooling v2.2 on both
Download Link:
https://androidfilehost.com/?w=files&flid=264755
Click to expand...
Click to collapse
Is your this tweak and sun-cooling tweak are different
kashyapp said:
Buddy i have flashed sun cooling
Want to flash this battety mod
If i flash does the overrite sun cooling
And i f i remove this mod does sun cooling which i flashed easier also be gone ??!!
Click to expand...
Click to collapse
it does overwrite automatically. If u remove this mod, sun-cooling is also gone, so u need to reflash Sun-Cooling.
aslam2121 said:
Is your this tweak and sun-cooling tweak are different
Click to expand...
Click to collapse
Yes, both are mine. Sun-Cooling and F.u.c.king-Tweaks are different. F.u.c.king-Tweaks does a lot of changes(and I've included Sun-Cooling inside it too). Sun-Cooling only changes Thermal configs.
Does this mod work along with AKT or have to install it alone?
characteres said:
Yes, both are mine. Sun-Cooling and F.u.c.king-Tweaks are different. F.u.c.king-Tweaks does a lot of changes(and I've included Sun-Cooling inside it too). Sun-Cooling only changes Thermal configs.
Click to expand...
Click to collapse
Your tweak does cool down my device and battery performance is also lot improved thanks for this wonderful work.
Introducing 4th iteration of F1XY Kernel.REQUIREMENTS
ROM compatible with msm-4.4, if it runs fine - you are good to go.
Clear mind.
Steardy hands.
Features
Using msm-4.4 kernel source, originally intended for SD660/835. Pie CAF release.
Lots of security improvements.
Kernel improvements from our lord and savior.
Scheduler improvements for better battery life.
Improved CPU freq control.
Faster wakeup.
A bit relaxed CPU throttling.
Improved charging driver for smoother battery charge/discharge.
Boeffla's wakelock blocker.
Latest F2FS and CFQ updates.
NET improvements + Wireguard.
Built with Clang 9.
Contributors
Kenny
Davide
Cooler Davide
Everyone in source: (will takes ages to load)
Subscribe to PewDiePie
Download
1.14: AFH - version for /factory -|- AFH- version for /vendor
1.13: AFH - version for /factory
1.13: AFH - version for /vendor
1.11: AFH
1.10: AFH
1.09: AFH
1.08: AFH
1.07 - skipped.
1.06: AFH
1.05: AFH
1.04 - skipped due to a big testing cycle.
1.03: AFH
1.02: AFH
Donations:
Sadly, due to PayPal's restrictions in my country I can't receive direct donations, however, I have a good friend in Russia, who's PayPal is not restricted and who will forward your donations to my debit card.
https://www.paypal.me/xeondead - add note "to Yaro"
XDA:DevDB Information
F1XY-4.4, Kernel for the Lenovo ZUK Z2 (Plus)
Contributors
Star_king12
Source Code: GitHub
Kernel Special Features:
Version Information
Status: Stable
Created 2018-11-13
Last Updated 2018-11-13
Changelogs will live here:
1.02 -> 1.03:
1. Improved GPU frequency control, you should see less lags/stuttering now.
2. Decreased CPU boost.
3. Deleted a few unneeded drivers (sound and touchscreens).
4. Killed IPA_WS wakelock.
5. Fixed some touchscreen regressions after 4.4 update. Wrong coordinates reporting should be fixed
1.03 -> 1.05:
1. EAS.
2. 4.4.165 and CAF updates.
3. Improved fingerprint scanner stability.
4. Zram improvements.
5. Added SimpleLMK (giving it another try).
1.05 -> 1.06
1. 4.4.166
2. Removed SLMK, no more lockups.
3. Disabled unused I/O schedulers (deadline, test)
1.06 -> 1.08
1. Upstream and CAF updates.
2. Reverted a lot of EAS commits (battery life should improve)
3. Fixed pocket mode.
4. Fixed a few memory leaks.
5. Fixed Hi-Fi sound.
6. HZ set to 1000.
1.08 -> 1.09
1. Some EAS updates.
2. Fixed Wi-Fi that died after 08 for some of the users.
3. Some camera improvemements from OnePlus 5.
1.09 -> 1.10
1. Camera issues should be gone now.
1.10 -> 1.11
1. Upstream (now with f2fs patches, some bugfixes and stuff)
2. VNDK support.
3. Fixed some memory leaks.
4. Medium overhaul of changes that were done in the past 1-2 months, filtered unused commits and organised everything better.
5. Improved touchscreen wake-up speed slightly.
1.13 is based on 1.10 (and thus 1.09), so changelog is relative to 1.10.
1. As always, EAS updates.
2. Upstream, CAF and kernel/common updates.
3. Fixed some memory leaks.
4. Faster touchsceen wakeup and suspend.
5. Improved performance by decreasing the amount of debug.
6. F2fs updates and improvements.
1.13 - > 1.14
1. Underclocked slightly further (1.4/1.78 GHz are new freqs)
2. Fixed an issue when phone's mic would die when a mic-less headphones were plugged in.
3. Removed an audio improving driver (didn't really improve anything).
4. Some toolchain optimizations enabled.
Guess I'll do it like this.
Seems fine, ty for the kernel from feheroroszorszag
Wew
Eyyyyy
Guess I'll take a reserve too
Edit: Time to use the reserve for a 1st page day 1 review
The kernel is working really well, with everything on stock because of no kernel tweaking.
The biggest improvement is probably standby batterylife and heat, for some reason other 4.4 kernels are really bad at this, resulting in around 20% battery loss overnight
The bad news is that USB tethering is still not working for me on all 4.4 kernels, including this one, so there's that
Slow charging Speed
Treble or non-treble
Faceless Sprit said:
Treble or non-treble
Click to expand...
Click to collapse
Treble
Yay.. too excited to test it. Can it have spectrum support..?
RaZoR747 said:
Yay.. too excited to test it. Can it have spectrum support..?
Click to expand...
Click to collapse
No.
Star_king12 said:
Guess I'll do it like this.
Click to expand...
Click to collapse
Impressive
hello @Star_king12, my device has a rare problem where most of the time when I try to scroll it registers a touch and while playing PUBG the trackpad stutters.
Only your F1XY CAF rev5 kernel fixed it for me and whichever rom I switch your kernel is the only solution.
Now with 4.4 kernel trend, I thought I could use F1XY4.4 for the hiccups but it missed out on the charm which the "3.18 caf rev5" had. So kindly implement the previous fix in your 4.4 edition too.
Need any testing or logcats, ready to cooperate.
zhhaa said:
hello @Star_king12, my device has a rare problem where most of the time when I try to scroll it registers a touch and while playing PUBG the trackpad stutters.
Only your F1XY CAF rev5 kernel fixed it for me and whichever rom I switch your kernel is the only solution.
Now with 4.4 kernel trend, I thought I could use F1XY4.4 for the hiccups but it missed out on the charm which the "3.18 caf rev5" had. So kindly implement the previous fix in your 4.4 edition too.
Need any testing or logcats, ready to cooperate.
Click to expand...
Click to collapse
I wish I knew what fixed it in that kernel. I'm aware of that issue and we are working with other devs to fix it, however since none of us have a device with such touchscreen, so it's way harder.
Star_king12 said:
I wish I knew what fixed it in that kernel. I'm aware of that issue and we are working with other devs to fix it, however since none of us have a device with such touchscreen, so it's way harder.
Click to expand...
Click to collapse
Can give me your telegram ID we can discuss in detail there and I can be your goto tester.
zhhaa said:
Can give me your telegram ID we can discuss in detail there and I can be your goto tester.
Click to expand...
Click to collapse
I already have 3-4 testers but there isn't much progress.
Installed Kernel on aex 6.0. At the moment everything is going great and solved the problem of charging. At the moment the performance is good without any problem. Later I will try if it is possible to connect the zuk to the computer. Thank you very much for your work.
Enviado desde mi ZUK Z2131 mediante Tapatalk
sivandra said:
Installed Kernel on aex 6.0. At the moment everything is going great and solved the problem of charging. At the moment the performance is good without any problem. Later I will try if it is possible to connect the zuk to the computer. Thank you very much for your work.
Enviado desde mi ZUK Z2131 mediante Tapatalk
Click to expand...
Click to collapse
How did you the charging problem ???
Direct install this kernel 3.18 to 4.4
RakeshDh!1 said:
How did you the charging problem ???
Click to expand...
Click to collapse
With Aex 6.0 new version, There was a problem during charging, you had to have the screen turned on to charge the battery. Installing this Kernel has solved the problem.
Enviado desde mi ZUK Z2131 mediante Tapatalk