Develop Bugs

[Q] 4.3 aosp cm 10.2 slow data speeds? newer gs3

Hey everyone,
Got a small problem, I just flashed the latest 10.2 cm nightly because I want a true aosp ROM on my "newer" gs3. Since flashing the ROM my data speeds have significantly slowed. I came from the 3.9.5 dandroid touchwiz and had fantastic 4g lte speeds for my location (about 4.5 MBS) now on the cm nightly I'm barely breaking 1 MBS and that's if I even receive my lte connection. I tinkered with the APN setting and am running on the sprint lte internet APN but isn't helping much. Is it a radio issue?
Thanks guys

Did you take note of what your baseband and what each kernel was in each rom? Is every ROM using the same baseband or is one possibly using an older version? What does the signal strength say as well? That would be under settings>about> or something like that. Current baseband is MD4.
alex4523 said:
Hey everyone,
Got a small problem, I just flashed the latest 10.2 cm nightly because I want a true aosp ROM on my "newer" gs3. Since flashing the ROM my data speeds have significantly slowed. I came from the 3.9.5 dandroid touchwiz and had fantastic 4g lte speeds for my location (about 4.5 MBS) now on the cm nightly I'm barely breaking 1 MBS and that's if I even receive my lte connection. I tinkered with the APN setting and am running on the sprint lte internet APN but isn't helping much. Is it a radio issue?
Thanks guys
Click to expand...
Click to collapse

base brand
My base brand on this ROM is l710pvbjl7 not md4, do I need to flash a new kernel to change this? Also its says LTE in signal status or 3g but only 1 bar and very weak

Do you have custom recovery?
Do you have your data backed up?
If you can do a nandroid I would and try flashing the baseband, it might make a difference. You can always nandroid back then.
EDIT: This is where you can find the MD4 firmware. It is at the end of the first post... http://forum.xda-developers.com/showthread.php?t=1910947
alex4523 said:
My base brand on this ROM is l710pvbjl7 not md4, do I need to flash a new kernel to change this? Also its says LTE in signal status or 3g but only 1 bar and very weak
Click to expand...
Click to collapse

Skeeredfitless said:
Do you have custom recovery?
Do you have your data backed up?
If you can do a nandroid I would and try flashing the baseband, it might make a difference. You can always nandroid back then.
Click to expand...
Click to collapse
I do have a back up how would I go about flashing the new base brand, thanks for your help so far brother, also I'm using twrp 2.6.3 the latest

Skeeredfitless said:
Did you take note of what your baseband and what each kernel was in each rom? Is every ROM using the same baseband or is one possibly using an older version? What does the signal strength say as well? That would be under settings>about> or something like that. Current baseband is MD4.
Click to expand...
Click to collapse
Baseband is stored in places that rom flashes do not touch. They are independent of each other, and I've yet to see a dev even mess with installing a particular modem when you install their rom.

alex4523 said:
I do have a back up how would I go about flashing the new base brand, thanks for your help so far brother, also I'm using twrp 2.6.3 the latest
Click to expand...
Click to collapse
In TWRP, just like a Rom, it's done been zipped up for you from that link
Sent from my GalaxyS3

Did you see I linked to a post with the MD4 firmware in my last post? Just in case you couldn't find it... :good:
Do you have Clockwork mod recovery or TWRP recovery? You will need ONE of those.
alex4523 said:
I do have a back up how would I go about flashing the new base brand, thanks for your help so far brother
Click to expand...
Click to collapse
---------- Post added at 05:51 PM ---------- Previous post was at 05:46 PM ----------
So it is only Sprint/Samsung that do them together? Good to know... still learning this stuff myself
CNexus said:
Baseband is stored in places that rom flashes do not touch. They are independent of each other, and I've yet to see a dev even mess with installing a particular modem when you install their rom.
Click to expand...
Click to collapse

Skeeredfitless said:
Did you see I linked to a post with the MD4 firmware in my last post? Just in case you couldn't find it... :good:
Do you have Clockwork mod recovery or TWRP recovery? You will need ONE of those.
---------- Post added at 05:51 PM ---------- Previous post was at 05:46 PM ----------
So it is only Sprint/Samsung that do them together? Good to know... still learning this stuff myself
Click to expand...
Click to collapse
OK flashed that base and it changed the brand, speed got a little quicker but signal is still weak 1 bar

Skeeredfitless said:
Did you see I linked to a post with the MD4 firmware in my last post? Just in case you couldn't find it... :good:
Do you have Clockwork mod recovery or TWRP recovery? You will need ONE of those.
---------- Post added at 05:51 PM ---------- Previous post was at 05:46 PM ----------
So it is only Sprint/Samsung that do them together? Good to know... still learning this stuff myself
Click to expand...
Click to collapse
Yup, only OTA's will contain both firmware (modem, etc) and the updated software

Go to Google play store and download network info II. There will be a tab with your signal dBm. What does that say? You might be having the same issue from my other thread.
alex4523 said:
OK flashed that base and it changed the brand, speed got a little quicker but signal is still weak 1 bar
Click to expand...
Click to collapse

I always appeared to have slower download speeds via Speedtest.net. Try Sensorly (they just had a large update) and their speedtest servers are awesome. I pulled 30+ in a spot I usually get 23-25. You may find it's the way Ookla's speedtest app is run in AOSP.

[Q] No LTE after CM 10.2 install on SPH-L710

Hello,
I have gotten some great help here on xda and have tried different modems (MD4 works best, MK3 caused battery drain, MB1 no service) I have been told to flash a touchwiz ROM and grab the APN then flash back to CM. I have not been able to find a touchwiz ROM that will work and on top of that, all the download sites have really annoying adware. Can anyone point me in the direction of a TWR that will work on my phone so I can get LTE finally?
Thank you in advance for your input and help and thank you to all that have offered advice on other threads.

flash a TW rom thats the same version as your current cm (4.3?), that should work no matter what

winepoet said:
Hello,
I have gotten some great help here on xda and have tried different modems (MD4 works best, MK3 caused battery drain, MB1 no service) I have been told to flash a touchwiz ROM and grab the APN then flash back to CM. I have not been able to find a touchwiz ROM that will work and on top of that, all the download sites have really annoying adware. Can anyone point me in the direction of a TWR that will work on my phone so I can get LTE finally?
Thank you in advance for your input and help and thank you to all that have offered advice on other threads.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1904099
do that install the recovery and the root access. setup do the apn like we talked about. then go back to your backup of cm and either keep md4 modem or flash mk3.

Thank you, but...
kaos420 said:
http://forum.xda-developers.com/showthread.php?t=1904099
do that install the recovery and the root access. setup do the apn like we talked about. then go back to your backup of cm and either keep md4 modem or flash mk3.
Click to expand...
Click to collapse
Thank you kaos420, however I have not been able to find a ROM that will work. I would welcome any and all suggestion for a TWR. Please.
Happy Thanksgiving.

Duh..!
winepoet said:
Thank you kaos420, however I have not been able to find a ROM that will work. I would welcome any and all suggestion for a TWR. Please.
Happy Thanksgiving.
Click to expand...
Click to collapse
Ciao kaos420, if I only clicked on the link you supplied I wouldn't be removing my foot from my mouth at this moment! Thanks.

winepoet said:
Ciao kaos420, if I only clicked on the link you supplied I wouldn't be removing my foot from my mouth at this moment! Thanks.
Click to expand...
Click to collapse
ya that link will place you back to stock. just flash the recovery and root zip after and before reboot. reboot . run the setup. go through that. will fix alot of issues. as well as you can get your apn. fyi tw 4.3 rom is pretty sweet as well. im running the stock 4.3 now. runs great.

kaos420 said:
ya that link will place you back to stock. just flash the recovery and root zip after and before reboot. reboot . run the setup. go through that. will fix alot of issues. as well as you can get your apn. fyi tw 4.3 rom is pretty sweet as well. im running the stock 4.3 now. runs great.
Click to expand...
Click to collapse
Where did you get that stock tw 4.3?

winepoet said:
Where did you get that stock tw 4.3?
Click to expand...
Click to collapse
It's posted in sprint Android development. I'd link you but mobile. Mk3 is new band. Works great.
---------- Post added at 03:29 AM ---------- Previous post was at 03:26 AM ----------
http://forum.xda-developers.com/showthread.php?t=2541900
That's new stock rooted 4.3 fantastic so far.

Please help! No data, need kitkat modem.

Just updated to Kitkat on carbonrom. My phone doesn't connect to any networks so I need a modem, but the links in the stock images/kernels/ROM/modem thread over in development has broken links for me.
I would post over there asking for help but don't have enough posts and lost my old account.
Some one please re host a modem that will work for me.
Thank you so much.

Note327 said:
Just updated to Kitkat on carbonrom. My phone doesn't connect to any networks so I need a modem, but the links in the stock images/kernels/ROM/modem thread over in development has broken links for me.
I would post over there asking for help but don't have enough posts and lost my old account.
Some one please re host a modem that will work for me.
Thank you so much.
Click to expand...
Click to collapse
Actually, I was wondering if there is a newer modem than MK7 for 4.4+ KK Roms... running CyanogenMod 11 and LOOOOOOOVE IT!

Note327 said:
Just updated to Kitkat on carbonrom. My phone doesn't connect to any networks so I need a modem, but the links in the stock images/kernels/ROM/modem thread over in development has broken links for me.
I would post over there asking for help but don't have enough posts and lost my old account.
Some one please re host a modem that will work for me.
Thank you so much.
Click to expand...
Click to collapse
All you had to do was look at the last page of images/modem thread. I even put the link in my signature so more people would see it.
svavrek said:
Actually, I was wondering if there is a newer modem than MK7 for 4.4+ KK Roms... running CyanogenMod 11 and LOOOOOOOVE IT!
Click to expand...
Click to collapse
MK7 is the latest modem... until T-Mobile releases KK hopefully in the next few weeks.

lllll
kozmo21 said:
All you had to do was look at the last page of images/modem thread. I even put the link in my signature so more people would see it.
MK7 is the latest modem... until T-Mobile releases KK hopefully in the next few weeks.
Click to expand...
Click to collapse
Sorry about that. I checked the first page then went straight to Google.
I flashed the modem but no APNs or networks are showing up. My baseband also says unknown.
I believe I have to flash this /firmwares/3/?download=22863 (domain is sammobile)
Do I need to use Odin or can I just flash it in TWRP? Will I need to reinstall my ROM after that?
Sorry for my ignorance. Thanks.

Note327 said:
Sorry about that. I checked the first page then went straight to Google.
I flashed the modem but no APNs or networks are showing up. My baseband also says unknown.
I believe I have to flash this /firmwares/3/?download=22863 (domain is sammobile)
Do I need to use Odin or can I just flash it in TWRP? Will I need to reinstall my ROM after that?
Sorry for my ignorance. Thanks.
Click to expand...
Click to collapse
Did you download the correct version of carbon?
I'm using DN3 from AT&T forum and working fine and still on 4.1.2 bootloader (with agni kernel).
If you download that from sammobile, you will be on 4.3 bootloader... and there is no going back to 4.1.2. The only reason for 4.3 is wifi working without using wifi fix or different kernel. I'll be on 4.1.2 until I have to change.

This is OP. Got my account back.
I flashed the modem (is that all you're supposed to do? No wiping any thing) and had the same issues. My IMEI is also gone.
Restored back to a previous backup and now have my IMEI, baseband, and everything working.
I re downloaded the 7/04 carbon nightly with the most recent KK gapps and I'm having the same issues.
For now I'm on my old ROM unless some one can help.
Sent from my SGH-T889 using XDA Free mobile app

Modems are specific to device and you should never flash a modem meant for any other devices. MK7 is the most up to date modem for SGH-T889.
For now flashing MK7 modem should bring back your IMEI.

Note_2 said:
This is OP. Got my account back.
I flashed the modem (is that all you're supposed to do? No wiping any thing) and had the same issues. My IMEI is also gone.
Restored back to a previous backup and now have my IMEI, baseband, and everything working.
I re downloaded the 7/04 carbon nightly with the most recent KK gapps and I'm having the same issues.
For now I'm on my old ROM unless some one can help.
Sent from my SGH-T889 using XDA Free mobile app
Click to expand...
Click to collapse
Make certain you are on the most current recovery be it CWM or TWRP or variants thereof. Also make certain you are flashing the version appropriate for your model. N7105 (Note 2 Int'l) or I317 (AT&T) would be OK for a T889 if a T889 version is not available.

Updating TWRP fixed it. Thanks, I had no idea that could cause problems.
Sent from my SGH-T889 using XDA Free mobile app

You're welcome. It stinks being stuck with something like that.

This is a Tmo modem http://www.mediafire.com/?5hrw5zr7hh4mnmt
That I am using on a t889 running 4.4.2 touch whiz rom based on the international version
I have service as well as data.
Again this is running on a touch whiz rom use at your own risk .
---------- Post added at 07:11 PM ---------- Previous post was at 07:05 PM ----------
kozmo21 said:
Did you download the correct version of carbon?
I'm using DN3 from AT&T forum and working fine and still on 4.1.2 bootloader (with agni kernel).
If you download that from sammobile, you will be on 4.3 bootloader... and there is no going back to 4.1.2. The only reason for 4.3 is wifi working without using wifi fix or different kernel. I'll be on 4.1.2 until I have to change.
Click to expand...
Click to collapse
how do you check bootloader version ?? I flashed the 4.3 from sammobile did that upgrade the bootloader too ?

Some_dude36 said:
This is a Tmo modem http://www.mediafire.com/?5hrw5zr7hh4mnmt
That I am using on a t889 running 4.4.2 touch whiz rom based on the international version
I have service as well as data.
Again this is running on a touch whiz rom use at your own risk .
---------- Post added at 07:11 PM ---------- Previous post was at 07:05 PM ----------
how do you check bootloader version ?? I flashed the 4.3 from sammobile did that upgrade the bootloader too ?
Click to expand...
Click to collapse
Download phone info from playstore... https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo&hl=en
If you flashed the stock 4.3 from sammobile in Odin, then you will be on 4.3 bootloader.

kozmo21 said:
Download phone info from playstore... https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo&hl=en
If you flashed the stock 4.3 from sammobile in Odin, then you will be on 4.3 bootloader.
Click to expand...
Click to collapse
Ok so how do you ungrey apn protocols

Some_dude36 said:
Ok so how do you ungrey apn protocols
Click to expand...
Click to collapse
Sorry, don't have an answer to that?
edit: did read that it works on slimkat 4.4 ROM... so there is a possible fix.

kernel question

am currently on mj2 bootloader/mj2 modem runnning a 4.4.2 rom. question is would i be ok with a NE4 (4.4.2) kernel on my 4.4.2 rom ?
or does bootloader and modem version matter?
any help/advice is appreciated.
(not really wanting to upgrade modem or bootloader).
err on the side of kindness

If you're on s 4.4.2 ROM, youve already got a 4.4.2 kernel. The kernel always has to match the ROM, so if you want a different 4.4.2 kernel than what you already have, it is OK to flash it. However, some things such as WiFi or mobile data may or may not work without the matching firmware. If that happens you will have to use a custom kernel that includes its own modules.
If you currently are using the kt747 kernel though, it does include those modules, so if you flash a stock NE4 kernel, you'll have to copy the modules from a stock NE4 ROM as well. (Or reflash the ROM if it already has the stock kernel and modules.). What ROM are you currently using?
Hope that all made sense!
Sent from my SAMSUNG-SGH-T999 using Tapatalk

Quantum v.3.54 (2014-03-07)
kernel from here
http://forum.xda-developers.com/showthread.php?t=2788357
enewman's i747 systrm dump. (still looking for that elusive SELinux set to permissive). lol
err on the side of kindness

no go
clean flashed rom then new kernel , stuck on samsung logo.
flashed kernel then rom and ended up with stock kernel.
uh.....so copy the modules from a NE4 ROM to the new kernel or to the ROM ? srry not to savvy on this stuff (i mean , after all , i did unlock an unlocked bootloader. lol)
err on the side of kindness

Coming from Quantum ROM, you'll have to factory reset. You have to whenever going to it from touchwiz to non touch wiz or it'll hang at boot.
Also flash the kernel after the ROM. ROM includes a kernel so by flashing the ROM second it replaces the kernel on it before.
Sent from my SAMSUNG-SGH-T999 using Tapatalk
---------- Post added at 12:45 AM ---------- Previous post was at 12:43 AM ----------
Oops! Sorry. Just realized you said you clean flashed when it wouldn't boot. Might be due to the older firmware, not totally sure on that though.
Try flashing just the ROM and then boot up and wait about 5 min. Then flash the insecure kernel and see if that solves it.
Sent from my SAMSUNG-SGH-T999 using Tapatalk
---------- Post added at 12:47 AM ---------- Previous post was at 12:45 AM ----------
If all else fails, and you're on a touch wiz ROM, there's an app called SeLinux mode changer (I think). It should work if nothing else does.
Sent from my SAMSUNG-SGH-T999 using Tapatalk

have tried SELinux mode changer but did not work on quantum or cm. have not tried on touch wiz though. thank you for help.:thumbup:
err on the side of kindness

Yeah, AFAIK, nothing has been found that will work on cm/aosp based ROMs.
Sent from my SAMSUNG-SGH-T999 using Tapatalk

did the wait 5 minute method but still nothing. but did find this thread so looks like people are working on it.
http://forum.xda-developers.com/showthread.php?t=2775101
thanks for all your help. am just gonna let it go for now.:thumbup:
err on the side of kindness

Extreme Syndicate ROM Discussion Thread

Hey Everyone!
I am at it again! I have made leaps today with my custom ROM.
It is not ready for release just yet but wanted to get a thread started for when it is ready, to get some opinions and further clarification.
Required:
1) Any G930 US Variant
2) Must be on the G930U PEH firmware prior to my ROM
3) Rooted with Flashfire
4) I highly recommend you know how to push apks. It will start out lightly debloated but will be extremely debloated by the time I finish!
What will it contain in v1?
1) Pre rooted
2) Debloated
3) Xposed
4) V4A
5) Might be missing stuff for v1, wait and see!
Suggestions?
Please post early suggestions below. They might not be considered for build 1 but will all beconsidered as we go.
Questions?
1) Maybe someone can chime in but to my knowledge the U firmware will work on any US variant S7? I am asking for clarification since my reasoning of using the U firmware is for it to be useable on all US variants to avoid having to develop for every variant separately (I dont have time for this.)
Credits:
Chainfire
psouza
JrKruse
bR3w3r
More to come when released!
Paypal email:
[email protected]
(Remember, donations are NOT required as we do this for fun and for FREE!)

I suggest you don't be selfish and hook your boy with the s7 edge up with a Rom 'U' version only keep it simple

2swizzle said:
I suggest you don't be selfish and hook you boy with the s7 edge up with a Rom 'U' version only keep it simple
Click to expand...
Click to collapse
technically itcan be used on the edge variant just need to odin the g935 eng boot after rom.
im on jrkruse 935u rom on my reg s7 with 0 issues at all.. even ppl edge stuff works lol

elliwigy said:
technically itcan be used on the edge variant just need to odin the g935 eng boot after rom.
im on jrkruse 935u rom on my reg s7 with 0 issues at all.. even ppl edge stuff works lol
Click to expand...
Click to collapse
I know that's why I said that lol. Good to see you at it again. If I recall you work like 60 hours a week and that's only one of your jobs lol jk

2swizzle said:
I know that's why I said that lol. Good to see you at it again. If I recall you work like 60 hours a week and that's only one of your jobs lol jk
Click to expand...
Click to collapse
yea, this week imdoin OT everyday so ton of hours..

elliwigy said:
Hey Everyone!
I am at it again! I have made leaps today with my custom ROM.
It is not ready for release just yet but wanted to get a thread started for when it is ready, to get some opinions and further clarification.
Required:
1) Any G930 US Variant
2) Must be on the G930U PEH firmware prior to my ROM
3) Rooted with Flashfire
4) I highly recommend you know how to push apks. It will start out lightly debloated but will be extremely debloated by the time I finish!
What will it contain in v1?
1) Pre rooted
2) Debloated
3) Xposed
4) V4A
5) Might be missing stuff for v1, wait and see!
Suggestions?
Please post early suggestions below. They might not be considered for build 1 but will all beconsidered as we go.
Questions?
1) Maybe someone can chime in but to my knowledge the U firmware will work on any US variant S7? I am asking for clarification since my reasoning of using the U firmware is for it to be useable on all US variants to avoid having to develop for every variant separately (I dont have time for this.)
Credits:
Chainfire
psouza
JrKruse
bR3w3r
More to come when released!
Paypal email:
[email protected]
(Remember, donations are NOT required as we do this for fun and for FREE!)
Click to expand...
Click to collapse
1. Will you provide links to or host a copy of the G930U PEH firmware?
2. I suppose that since this is the universal firmware, Verizon's Mobile Hotspot provisioning will not prevent us from using Native Mobile Hotspotting....can you confirm...and if not, can you apply a a modded version of the Mobile Hotspot software that bypasses the provisioning (similar to what psouza has done with his VZW debloat script for PE1)

elliwigy said:
technically itcan be used on the edge variant just need to odin the g935 eng boot after rom.
im on jrkruse 935u rom on my reg s7 with 0 issues at all.. even ppl edge stuff works lol
Click to expand...
Click to collapse
Just using flashfire?
---------- Post added at 01:08 PM ---------- Previous post was at 12:27 PM ----------
elliwigy said:
technically itcan be used on the edge variant just need to odin the g935 eng boot after rom.
im on jrkruse 935u rom on my reg s7 with 0 issues at all.. even ppl edge stuff works lol
Click to expand...
Click to collapse
Where did you find his rom? How's battery?

RockyCJC said:
1. Will you provide links to or host a copy of the G930U PEH firmware?
2. I suppose that since this is the universal firmware, Verizon's Mobile Hotspot provisioning will not prevent us from using Native Mobile Hotspotting....can you confirm...and if not, can you apply a a modded version of the Mobile Hotspot software that bypasses the provisioning (similar to what psouza has done with his VZW debloat script for PE1)
Click to expand...
Click to collapse
I can upload the U firmware..i cant remember where i got it
For hotspot you can use the zips already available by psouza if in not mistaken.. i dont use hotspot so ill need ppl to let me kno when i release build 1

Illogi.xbone said:
Just using flashfire?
---------- Post added at 01:08 PM ---------- Previous post was at 12:27 PM ----------
Where did you find his rom? How's battery?
Click to expand...
Click to collapse
1) I am going to use a rom.zip but you will still need the eng boot to have root i believe so odin 930U then root usig eng boot then flash my ROzm in FF
2) his rom is in the vzw s7e forum

Is the goal here to remedy the battery life issues and CPU hangs that the eng boot/root process created? I'm excited!
Sent from my SM-G930V using Tapatalk

elliwigy said:
I can upload the U firmware..i cant remember where i got it
For hotspot you can use the zips already available by psouza if in not mistaken.. i dont use hotspot so ill need ppl to let me kno when i release build 1
Click to expand...
Click to collapse
The zips provided by psouza are for the PE1 build only. He mentioned somewhere in his thread that it has to be compiled for each build.
Sent from my SM-G930V using Tapatalk

fronc01 said:
Is the goal here to remedy the battery life issues and CPU hangs that the eng boot/root process created? I'm excited!
Click to expand...
Click to collapse
I recommend you check out my other rom threads to see what the goal is..
essentially I shoot for an extremely debloated rom which typically does include better speed and battery life but that is more of a side effect imo

RockyCJC said:
The zips provided by psouza are for the PE1 build only. He mentioned somewhere in his thread that it has to be compiled for each build.
Click to expand...
Click to collapse
Not necessarily. some of it does work.. ideally however i like to bake things in.. the less zips to flash the better.. i wont worry too much as i dont release roms that dont work well to begin with

RockyCJC said:
The zips provided by psouza are for the PE1 build only. He mentioned somewhere in his thread that it has to be compiled for each build.
Sent from my SM-G930V using Tapatalk
Click to expand...
Click to collapse
The fix/fix+debloat zip that disable Verizon's Wi-Fi hotspot tethering provisioning does so by writing a modified framework-res.apk to the device, therefor it needs to match the firmware version. The patch is not complicated though (it's literally just changing/clearing two XML values), so anyone could decompile a different version, patch the xml, recompile, re-sign, and bundle that for any Verizon firmware version.

psouza4 said:
The fix/fix+debloat zip that disable Verizon's Wi-Fi hotspot tethering provisioning does so by writing a modified framework-res.apk to the device, therefor it needs to match the firmware version. The patch is not complicated though (it's literally just changing/clearing two XML values), so anyone could decompile a different version, patch the xml, recompile, re-sign, and bundle that for any Verizon firmware version.
Click to expand...
Click to collapse
Gotcha.. its not my top priority to be honest but its not difficult to do so ill most likely do it

I can confirm the U firmware works flawlessly on a G930V. I have also flashed @jrkruse's PlayStore ROM on my G930V, and it works great!

@elliwigy, I have used your ROMs in the past. Needless to say, I'm excited to see you are making one for the Verizon S7!
---------- Post added at 04:46 PM ---------- Previous post was at 04:46 PM ----------
[/COLOR @elliwigy, I have used your ROMs in the past. Needless to say, I'm excited to see you are making one for the Verizon S7!

CVertigo1 said:
I can confirm the U firmware works flawlessly on a G930V. I have also flashed @jrkruse's PlayStore ROM on my G930V, and it works great!
Click to expand...
Click to collapse
it sure does! im on his playstore rom as well right now.. i will be working on my rom some more tonight. have an FC to figure out during initial setup

elliwigy said:
it sure does! im on his playstore rom as well right now.. i will be working on my rom some more tonight. have an FC to figure out during initial setup
Click to expand...
Click to collapse
When does the FC happen exactly? I've had this issue when modifying ROMs, so I might be able to help.

CVertigo1 said:
When does the FC happen exactly? I've had this issue when modifying ROMs, so I might be able to help.
Click to expand...
Click to collapse
if i leave setup wizards in it fcs when it trys to set up the google acct during initial setup so i cant get past the setup..
if i remove both wizards it just fcs whenever trying to add a google acct..
i didnt remove any google apks so it must be lookin for something else i removed.. i will start from scratch tom. evening or Sunday.