Related
I'm looking for a dev team to port firefox OS to loads of devices, you need to have know git yes I'm posting it on my teams git-hub page. I'm keeping this short coz I can't think of anything. Apart from this
Important: Only devices running at least Android 4 (aka Ice Cream Sandwich) are supported. If your device is listed above but running an older version of Android, please update it before doing anything.
Click to expand...
Click to collapse
Quote from mozilla. So the Galaxy will only work with a custom ROM. Thats it!
Is MTK6589 Supported?
Apph3x said:
I'm looking for a dev team to port firefox OS to loads of devices, you need to have know git yes I'm posting it on my teams git-hub page. I'm keeping this short coz I can't think of anything. Apart from this Quote from mozilla. So the Galaxy will only work with a custom ROM. Thats it!
Click to expand...
Click to collapse
MTK6589 supported..coz full source are out....and i m ready 2 join ur porting firefox OS
Nice
Dhogai vannan said:
MTK6589 supported..coz full source are out....and i m ready 2 join ur porting firefox OS
Click to expand...
Click to collapse
I'm adding u to gihub team now
Hang on
Dhogai vannan said:
MTK6589 supported..coz full source are out....and i m ready 2 join ur porting firefox OS
Click to expand...
Click to collapse
BTW wats ur gihub name
tQ...
Apph3x said:
I'm adding u to gihub team now
Click to expand...
Click to collapse
The Same Name It GITHUB to...
Test Device?
Apph3x said:
I'm looking for a dev team to port firefox OS to loads of devices, you need to have know git yes I'm posting it on my teams git-hub page. I'm keeping this short coz I can't think of anything. Apart from this Quote from mozilla. So the Galaxy will only work with a custom ROM. Thats it!
Click to expand...
Click to collapse
Before you start your team needs a device to begin porting with. I recommend The Samsung Galaxy S2 GT-i9100 its a very good device and I could test the rom/OS
Hey guys,
I'm also trying to port firefoxos to the androidarmv6 project device galaxy5(gt-i5500)
I may learn many things from you guys.
Hi guys,
I'm currently working on Galaxy Wonder (aka ancora aka GT-I8150) and i use CM10.1 but still dont have any result because of my free time.
But starting today i should have more time to work on it.
Good luck guys.
what requires devices to port this OS... im on arc s (LT8i)....in the past someone have work on it but get stop....
arc_n_krizt said:
what requires devices to port this OS... im on arc s (LT8i)....in the past someone have work on it but get stop....
Click to expand...
Click to collapse
The op states that the device should be running on at least ICS
Sent from my HTCSensation using Tapatalk
Hello guys
this question is for developers so i want to try to port Ubuntu Touch for Samsung Galaxy W, i have a few questions:
1-when i type brunch ancora as command line appear to me the following errors:
Don't have a product spec for: 'cm_ancora'.
Do you have the right repo manifest.
It say that i should add manually in local_manifest/roomservice.xml but there are no file like this one into my folder and i try to show hidden file but i can't found anything, so where the mistake?
2-When i try to download frameworks like av and native this one is refuse my connection, is it possible to port on our phone?thanks
Please help him he's trying to port Ubuntu Touch to our nearly dead phone
haky 86 said:
Hello guys
this question is for developers so i want to try to port Ubuntu Touch for Samsung Galaxy W, i have a few questions:
1-when i type brunch ancora as command line appear to me the following errors:
Don't have a product spec for: 'cm_ancora'.
Do you have the right repo manifest.
It say that i should add manually in local_manifest/roomservice.xml but there are no file like this one into my folder and i try to show hidden file but i can't found anything, so where the mistake?
2-When i try to download frameworks like av and native this one is refuse my connection, is it possible to port on our phone?thanks
Click to expand...
Click to collapse
ı think you must contact with mrs. czobor he was working ubuntu touch on galaxy s plus(brother of galaxy w)
here you can look this thread: http://forum.xda-developers.com/showthread.php?t=2382600
good luck mate and one suggestion: dont lose your hope anytime :good:
Thanks
hack4er said:
ı think you must contact with mrs. czobor he was working ubuntu touch on galaxy s plus(brother of galaxy w)
here you can look this thread: http://forum.xda-developers.com/showthread.php?t=2382600
good luck mate and one suggestion: dont lose your hope anytime :good:
Click to expand...
Click to collapse
Of course man, i am working based on this article too http://forum.xda-developers.com/showthread.php?t=1915412 by using ancora git clone, let's see if worked or not but i read on Ubuntu Touch official website there is a work in progress for our phone that i have it about 3 years ago.
https://wiki.ubuntu.com/Touch/Devices
haky 86 said:
Of course man, i am working based on this article too http://forum.xda-developers.com/showthread.php?t=1915412 by using ancora git clone, let's see if worked or not but i read on Ubuntu Touch official website there is a work in progress for our phone that i have it about 3 years ago.
https://wiki.ubuntu.com/Touch/Devices
Click to expand...
Click to collapse
Also you can contact with mrs. Lukas Krotovic through github(nickname:firelmnt he is main developer for ubuntu touch on galaxy w) here is the his github profile:https://github.com/firelmnt/android_device_samsung_ancora or you can contact with him through twitter https://mobile.twitter.com/lkfirefox
He and you can work together for porting ubuntu touch to ancora(galaxy w)
Also here are the some kernel changes for ubuntu touch os on 7x30 devices by mrs. Czobor (references) https://github.com/czobor/phablet_kernel_samsung_msm7x30-common/commit/9e33c7bbca66333c3802818e47f105d0d2f87e12
Last thing do not give up man :good: try and try if you encounter an error good luck mate
İ havent idea for questions. But i supporting you good job.
GT-I8150 cihazımdan Tapatalk kullanılarak gönderildi
Hello mrs. @firelmnt and mrs. @haky 86
You can use this awesome guide for porting. https://wiki.ubuntu.com/Touch/Porting İ think it should be easy as building CM
Lets do it guys :good:
Fix Compiling
sir mordred said:
Hello mrs. @firelmnt and mrs. @haky 86
You can use this awesome guide for porting. https://wiki.ubuntu.com/Touch/Porting İ think it should be easy as building CM
Lets do it guys :good:
Click to expand...
Click to collapse
Hello mrs @sir mordred
1-I follow this guide too, but i don't know if necessary to download phablet-dev-bootstrap -c [target_directory] means -c /root/WORKING_DIRECTORY ?
2-I still can't find this file to enable new device: .repo/local_manifests/roomservice.xml
whats wrong..
I contact sir @firelmnt and he said to me about an error during compiling it, so same thing with mine..
any ideas thanks
sir mordred said:
Hello mrs. @firelmnt and mrs. @haky 86
You can use this awesome guide for porting. /url/ İ think it should be easy as building CM
Lets do it guys :good:
Click to expand...
Click to collapse
Hi guys,
Now i'm still getting an errors but only 'cause of proprietary files, so i'll try to fix list of blobs and try it again. I'll report there my results.
Thanks for support.
Thanks
sir mordred said:
Hello mrs. @firelmnt and mrs. @haky 86
You can use this awesome guide for porting. https://wiki.ubuntu.com/Touch/Porting İ think it should be easy as building CM
Lets do it guys :good:
Click to expand...
Click to collapse
firelmnt said:
Hi guys,
Now i'm still getting an errors but only 'cause of proprietary files, so i'll try to fix list of blobs and try it again. I'll report there my results.
Thanks for support.
Click to expand...
Click to collapse
You are welcome sir
firelmnt said:
Hi guys,
Now i'm still getting an errors but only 'cause of proprietary files, so i'll try to fix list of blobs and try it again. I'll report there my results.
Thanks for support.
Click to expand...
Click to collapse
you are welcome mate
also are you using cm10.1 ion kernel,vendor and device repos? arent you? because those repos are more updated
-https://github.com/arco/samsung-kernel-msm7x30/tree/cm-10.1_ion
-https://github.com/arco/android_device_samsung_ancora/tree/cm-10.1_ion
-https://github.com/arco/android_vendor_samsung_ancora/tree/cm-10.1_ion
and last one you can contact with some ubuntu devs on xda for compile errors
for example mrs. MaxWallstedt(he ported ubuntu touch to s2) http://forum.xda-developers.com/showthread.php?t=2188621
good luck and good work mate :good:
Hi guys,
I've successfully build an image but it's not bootable, so I'll try it again with newer repos and give you report.
But if someone would try it self, then I created in my repos branch "ubuntu-phone" so fork me or ask me to add you to contribution.
For better, faster communication use google+ or skype:
skype: krotovicl
google+: +LukasKrotovic
Tell me about your builds
Regards
firelmnt said:
Hi guys,
I've successfully build an image but it's not bootable, so I'll try it again with newer repos and give you report.
But if someone would try it self, then I created in my repos branch "ubuntu-phone" so fork me or ask me to add you to contribution.
For better, faster communication use google+ or skype:
skype: krotovicl
google+: +LukasKrotovic
Tell me about your builds
Regards
Click to expand...
Click to collapse
Wow it sounds good and thanx again mate for your effort
And also yeah you can use new ion repos(those are more updated) and you must make some change on board ancora in kernel like that https://github.com/czobor/phablet_kernel_samsung_msm7x30-common/commit/9e33c7bbca66333c3802818e47f105d0d2f87e12 (galaxy s plus and galaxy w are very similar devices 7x30/8x55 devices)
Wow
Nice work
Well I tried to switch repos to newer _ion branch, but getting an error while compiling. I think that some kernel files are missing.
So I don't have any clue why it won't boot up
If anyone have any idea, post it there or send me message through email, skype or google+.
Regards
firelmnt said:
Well I tried to switch repos to newer _ion branch, but getting an error while compiling. I think that some kernel files are missing.
So I don't have any clue why it won't boot up
If anyone have any idea, post it there or send me message through email, skype or google+.
Regards
Click to expand...
Click to collapse
Firstly we must fix compile errors and then lets see it will boot or not so can you collect all compile errors and paste it to pastebin. Also did you try some spesific changes on board ancora file in kernel(i wrote in my previous post)
firelmnt said:
Well I tried to switch repos to newer _ion branch, but getting an error while compiling. I think that some kernel files are missing.
So I don't have any clue why it won't boot up
If anyone have any idea, post it there or send me message through email, skype or google+.
Regards
Click to expand...
Click to collapse
try post up what error during compilation..
normally kernel did not boot up because different ramdisk.. means you need to change necessary thing in ramdisk to make it boot.
hurtsky said:
try post up what error during compilation..
normally kernel did not boot up because different ramdisk.. means you need to change necessary thing in ramdisk to make it boot.
Click to expand...
Click to collapse
Ok, there is the error: Pastebin
Code:
make: *** No rule to make target `/home/lukas/Builds/ubuntu-phone/out/target/product/ancora/obj/KERNEL_OBJ/usr', needed by `/home/lukas/Builds/ubuntu-phone/out/target/product/ancora/obj/SHARED_LIBRARIES/audio.primary.msm7x30_intermediates/AudioHardware.o'. Stop.
firelmnt said:
Ok, there is the error: Pastebin
Code:
make: *** No rule to make target `/home/lukas/Builds/ubuntu-phone/out/target/product/ancora/obj/KERNEL_OBJ/usr', needed by `/home/lukas/Builds/ubuntu-phone/out/target/product/ancora/obj/SHARED_LIBRARIES/audio.primary.msm7x30_intermediates/AudioHardware.o'. Stop.
Click to expand...
Click to collapse
yea.. it seem you repo not complete.. try sync the repo again.
Edit: but for your information.. this is not kernel files.. if i not mistake or in my short knowledge.. kernel and ROM did not built at the same time.. sorry if i mistake.
Updated
Hi, i just finish to sync repo for Ubuntu code and Cyanogen mod 10.1, all repos are done 100% without any problems, i have a few question:
Should i enable a device for cm 10.1 by mkdir in WORKING_DIRECTORY/devic/samsung and sync ancora's repos.
Can i enable a new device by edit defualt.xml in manifests after sync ancora's repos
Haky86
Hello community,
i m sorry for this noobish thread.
Im working on a CM build for T805.
I started from creating a device tree and managed to build it up until a certain point, where i managed to have a build which failed in the installation process because ext4 was not understood as a valid fs_type.
Anyways my intention was to build this device tree up by myself, which failed... hard.
So my next steps are to start from a working device tree like this one http://forum.xda-developers.com/galaxy-tab-s/orig-development/rom-cyanogenmod-11-fort800-t2921507 for t800 and modifing it to fully support t805.
So diving in to the boardconfig.mk of this repo just brought me to new questions. Like where do i find a complete reference of what variables i can use in this boardconfig.
As you see im pretty nooby on this topic. So i would kindly ask you where i can get further help or maybe a partner who likes to work with me on cm porting for t805
thanks for the help in advance
greets d4rk
Don't know anything myself, but good luck!
I own an 805 and am craving CM12
d4rk1337 said:
Hello community,
i m sorry for this noobish thread.
Im working on a CM build for T805.
I started from creating a device tree and managed to build it up until a certain point, where i managed to have a build which failed in the installation process because ext4 was not understood as a valid fs_type.
Anyways my intention was to build this device tree up by myself, which failed... hard.
So my next steps are to start from a working device tree like this one http://forum.xda-developers.com/galaxy-tab-s/orig-development/rom-cyanogenmod-11-fort800-t2921507 for t800 and modifing it to fully support t805.
So diving in to the boardconfig.mk of this repo just brought me to new questions. Like where do i find a complete reference of what variables i can use in this boardconfig.
As you see im pretty nooby on this topic. So i would kindly ask you where i can get further help or maybe a partner who likes to work with me on cm porting for t805
thanks for the help in advance
greets d4rk
Click to expand...
Click to collapse
Ive actually been thinking of doing the same thing but i know i just dont have the time....but here was my place of reference and theres another link on there which gives you even more expanded support.
http://wiki.cyanogenmod.org/w/Doc:_porting_intro
pdolton2000 said:
Ive actually been thinking of doing the same thing but i know i just dont have the time....but here was my place of reference and theres another link on there which gives you even more expanded support.
Click to expand...
Click to collapse
Hello and thank you. I also started as this point and build my device configuration from scratch and then compared with an actual t800 device tree. i mean im proud that i calculated the partition sizes right and managed to extract the partition schema. Also i was able to extract some important blobs from my device.
But there i had a device config, which would not even install, because something was missing to mount the partitions as ext4 while installing.
So i guess there must be another ressource to start from or @The Devs is it just learning by doing and copying from other repositories?
d4rk1337 said:
Hello and thank you. I also started as this point and build my device configuration from scratch and then compared with an actual t800 device tree. i mean im proud that i calculated the partition sizes right and managed to extract the partition schema. Also i was able to extract some important blobs from my device.
But there i had a device config, which would not even install, because something was missing to mount the partitions as ext4 while installing.
So i guess there must be another ressource to start from or @The Devs is it just learning by doing and copying from other repositories?
Click to expand...
Click to collapse
@Barracuda77777 @eousphoros Both these guys have succesful cynogenmod roms that they ported with active threads and now ive tagged them hopefully one of them will kindly glance at what youve described and be able to help you....its very respectable that your making the effort i will say...unfortunatly these waters i have not swam yet
d4rk1337 said:
Hello community,
i m sorry for this noobish thread.
Im working on a CM build for T805.
I started from creating a device tree and managed to build it up until a certain point, where i managed to have a build which failed in the installation process because ext4 was not understood as a valid fs_type.
Anyways my intention was to build this device tree up by myself, which failed... hard.
So my next steps are to start from a working device tree like this one http://forum.xda-developers.com/galaxy-tab-s/orig-development/rom-cyanogenmod-11-fort800-t2921507 for t800 and modifing it to fully support t805.
So diving in to the boardconfig.mk of this repo just brought me to new questions. Like where do i find a complete reference of what variables i can use in this boardconfig.
As you see im pretty nooby on this topic. So i would kindly ask you where i can get further help or maybe a partner who likes to work with me on cm porting for t805
thanks for the help in advance
greets d4rk
Click to expand...
Click to collapse
Hey mate, thought about making the same, but for CM12 I think, maybe we should talk together.. and also with @pdolton2000!
Tkkg1994 said:
Hey mate, thought about making the same, but for CM12 I think, maybe we should talk together.. and also with @pdolton2000!
Click to expand...
Click to collapse
hey bro, ofc we should. I would have started from CM12 but i thought maybe is should begin with CM11 to learn some lessons and have better chances because there are allready ports for t800.
How can we talk, icq or irc?
Tkkg1994 said:
Hey mate, thought about making the same, but for CM12 I think, maybe we should talk together.. and also with @pdolton2000!
Click to expand...
Click to collapse
Id love to join in its just im really busy busy...i couldnt give it the time it deserves....god it was like a week ago i was talking about capacitive button mods and ive still not finalized that one lol.....maybe lol ...ok what the hell im willing to give it a bash maybe we should just pm each other our emails n chat via fb or email or something?
d4rk1337 said:
hey bro, ofc we should. I would have started from CM12 but i thought maybe is should begin with CM11 to learn some lessons and have better chances because there are allready ports for t800.
How can we talk, icq or irc?
Click to expand...
Click to collapse
Irc is one way, pm each other our email for fb or whatever im game for anything got nothing to hide lol
Edut
However we talk it would be good if the three of us got sent messages of what we were all saying to each other to read even if not there at the time.
pdolton2000 said:
Id love to join in its just im really busy busy...i couldnt give it the time it deserves....god it was like a week ago i was talking about capacitive button mods and ive still not finalized that one lol.....maybe lol ...ok what the hell im willing to give it a bash maybe we should just pm each other our emails n chat via fb or email or something?
Irc is one way, pm each other our email for fb or whatever im game for anything got nothing to hide lol
Click to expand...
Click to collapse
So fb would be cool i guess. We could have a nice group chat.
But i have to mention im am totally noobish when it comes to android building. But im a professional C#.NET developer and im learning fast when it comes to IT so we could give it a shot Ill pm my fmail
d4rk1337 said:
So fb would be cool i guess. We could have a nice group chat.
But i have to mention im am totally noobish when it comes to android building. But im a professional C#.NET developer and im learning fast when it comes to IT so we could give it a shot Ill pm my fmail
Click to expand...
Click to collapse
Well ill pm you mine too then lol im sure we can both take a look at what youve done so far...gonna be a tricky one though as diving in at the deeper end than planned to begin lol
pdolton2000 said:
Well ill pm you mine too then lol im sure we can both take a look at what youve done so far...gonna be a tricky one though as diving in at the deeper end than planned to begin lol
Click to expand...
Click to collapse
d4rk1337 said:
So fb would be cool i guess. We could have a nice group chat.
But i have to mention im am totally noobish when it comes to android building. But im a professional C#.NET developer and im learning fast when it comes to IT so we could give it a shot Ill pm my fmail
Click to expand...
Click to collapse
My email is here!
Please send me an email if you like, we will see how everything goes!
bump,lets keep this going!
Just a small update.
We are working on this here.
I was having trouble to bring my device tree to build.
I suppose i fixed all my problems yesterday (but i need to start a new build today to see if its running so far)
As soon as i got it ill setup a git repository for this project and we can start to port the t805 kernel.
Ill keep you up to date here.
We would also love to have some more support, if some developers are interested in contributing, send me a pm ill add you to the repo.
Cheers d4rk
Hello fellow XDA members, I recently purchased a Le Pro 3 and a Le S3 during the flash sale and would like to use Cyanogenmod on my devices. I was wondering if anyone on this forum has ever ported a ROM before as I have not, and only know about the CM porting guide and opensource.le.com for the kernel source. If anyone has any tips or would like to assist me in porting CM13 to the Pro 3 please reply to this thread or PM me. Thanks, and let's hope LeEco releases the source soon!
Love to help but this isn't my department ????. But we should probably see more support in a couple more days once they start arriving here
Just out of curiousity, what exactly had you hoped to achieve with this post? If you're interested in porting, ideally you should at least be able to build a rom (for another pre-existing device)... and then you'll have to hunt down help on the CM forums and then eventually IRC.
Talking about this on XDA is pointless.
dr4stic said:
Just out of curiousity, what exactly had you hoped to achieve with this post? If you're interested in porting, ideally you should at least be able to build a rom (for another pre-existing device)... and then you'll have to hunt down help on the CM forums and then eventually IRC.
Talking about this on XDA is pointless.
Click to expand...
Click to collapse
The purpose of my post was to see if anyone in the XDA community had experience porting a ROM to a new device, and if they'd be interested in helping me. I have read through a few guides and understanding building a ROM, but am struggling to find what I must "merge." From what I've found so far, I'll need to edit/merge the directories in /system/libs and edit the kernel?
limitlesscodes said:
The purpose of my post was to see if anyone in the XDA community had experience porting a ROM to a new device, and if they'd be interested in helping me. I have read through a few guides and understanding building a ROM, but am struggling to find what I must "merge." From what I've found so far, I'll need to edit/merge the directories in /system/libs and edit the kernel?
Click to expand...
Click to collapse
No, it's far more complicated than that. You'll need a copy of the kernel for sure, but you'll also need a device definition. You can use the op3's device as a template, it's probably the best example of an msm8996 device you can have.
You really should be checking into the CM forums. CM people are pretty uppity about not supporting things on XDA. They also don't tend to help. Even as a developer I find it difficult sometimes to get their attention. Your best bet is to go to them if you want their help. Good luck.
dr4stic said:
No, it's far more complicated than that. You'll need a copy of the kernel for sure, but you'll also need a device definition. You can use the op3's device as a template, it's probably the best example of an msm8996 device you can have.
You really should be checking into the CM forums. CM people are pretty uppity about not supporting things on XDA. They also don't tend to help. Even as a developer I find it difficult sometimes to get their attention. Your best bet is to go to them if you want their help. Good luck.
Click to expand...
Click to collapse
Yeah, I understand. I also found out that it will be about a month until LeEco officially releases all of the source.
limitlesscodes said:
Yeah, I understand. I also found out that it will be about a month until LeEco officially releases all of the source.
Click to expand...
Click to collapse
Where did you get that information from? They "accidentally" released kernel sources not too long ago and seemingly withdrew it. I got a copy of them and that's what I've been working with. I don't have a device to verify if any of it works.
dr4stic said:
Where did you get that information from? They "accidentally" released kernel sources not too long ago and seemingly withdrew it. I got a copy of them and that's what I've been working with. I don't have a device to verify if any of it works.
Click to expand...
Click to collapse
I asked on this forum. Also my S3 is coming tonight, and my Pro tomorrow. I have a copy of the Pro 3 kernel source as well but as of now don't know what to do. What have you worked on so far?
limitlesscodes said:
I asked on this forum. Also my S3 is coming tonight, and my Pro tomorrow. I have a copy of the Pro 3 kernel source as well but as of now don't know what to do. What have you worked on so far?
Click to expand...
Click to collapse
Not a lot. I've identified the CAF tag the sources are based on and have been working to separate the relevant LeEco mods from the less relevant ones. I've also been attempting to remove the leeco specific things from the drivers that i'm keeping since they're a horrible mess and CM won't be able to make use of them anyway. I've also been finding the appropriate open versions of the drivers and taking the latest ones instead.
The mods from LeEco seem to be a mess, the dmesg output I got from a user on the chinese model (the x720) had segfaults from the modifications just after boot. The logcats are so full of errors I was unable to get the user to send me a full logcat from boot.
Interestingly enough, the chinese system rom looks like it came from a Le Max2. This makes sense since it's LeEco's first msm8996 device, and the Le Pro3 is the second one. I imagine the kernel sources work across a number of the 8996's.
Can you send me the link to where you got the open drivers.
limitlesscodes said:
I asked on this forum. Also my S3 is coming tonight, and my Pro tomorrow. I have a copy of the Pro 3 kernel source as well but as of now don't know what to do. What have you worked on so far?
Click to expand...
Click to collapse
Please share the sources.
Sent from my LEX727 using Tapatalk
ceo.mtcl said:
Please share the sources.
Sent from my LEX727 using Tapatalk
Click to expand...
Click to collapse
here
limitlesscodes said:
here
Click to expand...
Click to collapse
Thank you so much!
limitlesscodes said:
here
Click to expand...
Click to collapse
This is not a International version? Its USA version? Where is the International source code?
Here's a mega mirror in case the drive link goes down.
https://mega.nz/#!7Ek3HYaB!1H0WibOjwlg1P0vaaJ2qcrAAsl-PjruB9-_X1ECqfnw
Wish i could help more, but it looks like the kernel source is in there too, perhaps that means a fully functional cm13 rom that works AT LEAST as well as the stock rom. VERY EXCITE!
+1
I'm also waiting for CM13.
csyann said:
I'm also waiting for CM13.
Click to expand...
Click to collapse
:good:
csyann said:
I'm also waiting for CM13.
Click to expand...
Click to collapse
giogio1 said:
:good:
Click to expand...
Click to collapse
Waiting for CM 14.1
http://opensource.le.com
I Want A Leanr That How Build A Custom Rom For One Plus 5t
Deepusingh786 said:
I Want A Leanr That How Build A Custom Rom For One Plus 5t
Click to expand...
Click to collapse
Learn java first bud
Deepusingh786 said:
I Want A Leanr That How Build A Custom Rom For One Plus 5t
Click to expand...
Click to collapse
That was the dumbest answer, u don't need to learn Java first, lol. Hines u can learn Java in the process. This guide is all u need to build, https://raw.githubusercontent.com/nathanchance/Android-Tools/master/Guides/Building_AOSP.txt.
You have to sync the CAF Branch for 5T on whatever ROM you choose. I didn't Know first thing about building, and this guide got me successful build. If u fillow the guide toul have zero issues.
yung40oz84 said:
That was the dumbest answer, u don't need to learn Java first, lol. Hines u can learn Java in the process. This guide is all u need to build, https://raw.githubusercontent.com/nathanchance/Android-Tools/master/Guides/Building_AOSP.txt.
You have to sync the CAF Branch for 5T on whatever ROM you choose. I didn't Know first thing about building, and this guide got me successful build. If u fillow the guide toul have zero issues.
Click to expand...
Click to collapse
The link you posted doesn't work but it was simple to find an alternative on Google. I've always wondered how to build a ROM so it was interesting to look at, maybe I'll give it a shot sometime one I get Linux dual-booting on my laptop. Thanks!
yung40oz84 said:
That was the dumbest answer, u don't need to learn Java first, lol. Hines u can learn Java in the process. This guide is all u need to build, https://raw.githubusercontent.com/nathanchance/Android-Tools/master/Guides/Building_AOSP.txt.
You have to sync the CAF Branch for 5T on whatever ROM you choose. I didn't Know first thing about building, and this guide got me successful build. If u fillow the guide toul have zero issues.
Click to expand...
Click to collapse
link dead, update pls,
I build GZOSP and I hardly know Java.
Mikxx said:
link dead, update pls,
Click to expand...
Click to collapse
haha if you look at the URL there is a " . " on the end that shouldn't be there. If you cant solve that simple problem I wouldn't recommend getting into building roms since that is 90% problem solving and you do need some knowledge about basic stuff.
Misanful said:
haha if you look at the URL there is a " . " on the end that shouldn't be there. If you cant solve that simple problem I wouldn't recommend getting into building roms since that is 90% problem solving and you do need some knowledge about basic stuff.
Click to expand...
Click to collapse
hahaha lol link was clickable so i assumed it woud be the right one lol, anyways thanks for the clarification