Related
Firstly I love this phone. After working through 4 Samsung Galaxy S's to finally ask to be switched away from it to this, I was very happy.
This phone is rock solid.
BUT. I have a problem. I like to use maps or nav in my car. I have the phone plugged in but after the timeout period the screen goes dim. I'm normally OK with that but the dim setting on this phone seems to be ridiculously dark!
To your knowledge, without rooting it to get the Cyanogen settings, is there a way to brighten the dimmed level of brightness?
I have tried disabling the auto-brightness and bumping it up but still after the timeout period it dims very dark.
How about a toggle or widget to keep the screen always on? There are quite a few available I reckon. I know its one extra step to carry out whereas you are looking for something more automated. Maybe there is an app that can let you make a list of apps that enable screen always on?... Not sure about that but worth a look eh?
i do use a switch with Extended Controls widget.
the problem isnt that it dimms, it's that when it does dim it is far too dark.
When the samsung went to the dim setting it was still viewable.
If i remember right when i had it plugged in it would not dim if i was viewing maps.
anyways, the phone as it is is useless when it dims. i can touch the screen to bring back the brightness. I can set the timeout period to 30 minutes, but all of this requires that i re-activate the screen to bring it back.
i guess i am seeing one more reason to root the device. i'm nervous about rooting and would prefer to not have to if i dont need to.
groaner said:
Firstly I love this phone. After working through 4 Samsung Galaxy S's to finally ask to be switched away from it to this, I was very happy.
This phone is rock solid.
BUT. I have a problem. I like to use maps or nav in my car. I have the phone plugged in but after the timeout period the screen goes dim. I'm normally OK with that but the dim setting on this phone seems to be ridiculously dark!
To your knowledge, without rooting it to get the Cyanogen settings, is there a way to brighten the dimmed level of brightness?
I have tried disabling the auto-brightness and bumping it up but still after the timeout period it dims very dark.
Click to expand...
Click to collapse
This is a characteristic of the software that you are using. The software needs to establish a WAKE LOCK in order to keep the screen bright. If it isn't working, then there is something wrong with the software you are using. I suggest using COPILOT for navigation. It works properly.
dhkr123 said:
This is a characteristic of the software that you are using. The software needs to establish a WAKE LOCK in order to keep the screen bright. If it isn't working, then there is something wrong with the software you are using. I suggest using COPILOT for navigation. It works properly.
Click to expand...
Click to collapse
agreed, the software is probably working properly. google navigation does not time out. google maps does and they dont give you an option to have it not time out when plugged in. silly if you ask me.
i dont mind that as much as i mind how much it dims.
Does anyone else find that the desire z dims too dark?
anyways, i may be beating a dead horse here. trying to get blood from a stone and all that.
well if anyone has any other ideas that would be helpful. thanks for the suggestions thus far.
In a 100% dark area (movie theater, etc.), when I flick my wrist to turn on the watch, it turned on with full brightness on. It stay there indefinitely... sometimes it'll go away by itself, other time I have to do something, like swiping cards before the screen will go dim.
In a semi (50% dark), the screen will not turn on to its full brightness, but at... dim. WTH?!
Stick watch face?
I've noticed this as well (when driving at night). Since it turns on all the time (I steer with the same hand I wear my watch on), I've noticed lots of strange behavior. Sometimes it turns on very bright, and then goes back to sleep. Sometimes it turns on bright and then dims to the minimal brightness that it should be. Sometimes it turns on with the appropriate, minimum brightness. There seems to be no rhyme or reason to it. I'm running a stock watch face, and have very few apps installed.
As someone offered up 'muting' the watch while driving in another thread as a possible solution, it doesn't help me. Whether or not the watch is muted, it still wakes up all the time, and varying brightness levels.
bruceo said:
Stick watch face?
Click to expand...
Click to collapse
Emm...you mean stock watch face? If yes, I am using the classic one.
Auto brightness works well for me with ambient mode ON, I think I remember it being buggy with ambient mode OFF, what is yours set to?
v3ngence said:
Auto brightness works well for me with ambient mode ON, I think I remember it being buggy with ambient mode OFF, what is yours set to?
Click to expand...
Click to collapse
I have ambient mode OFF to save battery. Will turning it on fix the issue? I use Sleep as Android for sleep tracking and turn Ambient off and it lights up here and there at night.
Cut it out guys. ..or this thread will be locked
Sent from my GT-N7100 using Tapatalk 2
pakure said:
Cut it out guys. ..or this thread will be locked
Sent from my GT-N7100 using Tapatalk 2
Click to expand...
Click to collapse
^^This...well probably not locked
I did a little thread cleaning to remove the off topic arguments about using a device (phone or watch) in a movie theatre. There were a lot of people who quoted these posts, and unfortunately I had to remove these posts as well...sorry for that.
Here is the thing, this thread is about the buggy behavior of the watch waking up at full brightness. It doesn't matter if it is in a theatre, whilst driving the car, or you just woke up in the middle of the night and want to check the time. More that one person has reported the issue and there has been a proposed fix...please keep the thread focused on finding the root causes, fixes, work arounds, etc. No matter what, please knock off the name calling, that will only get you into trouble!
Thanks!:good:
lanwarrior said:
I have ambient mode OFF to save battery. Will turning it on fix the issue? I use Sleep as Android for sleep tracking and turn Ambient off and it lights up here and there at night.
Click to expand...
Click to collapse
Try turning ambient mode ON during the day,
I just tested and with it off the screen does occasionally come on at full brightness even in the dark. With ambient on it only comes on bright the first time, quickly dims, and stays dim until taken into daylight :good:
v3ngence said:
Try turning ambient mode ON during the day,
I just tested and with it off the screen does occasionally come on at full brightness even in the dark. With ambient on it only comes on bright the first time, quickly dims, and stays dim until taken into daylight :good:
Click to expand...
Click to collapse
Interesting. So with ambient ON, it still turn on at full brightness but momentarily. I'll test this and will report back.
Well, I'm having the opposite problem following the last update.
it frequently (at work right now, for example) comes up EXTREMELY dim, I'd guess maybe 5x dimmer than brightness setting '1'.
I'm setting it to '1' as a workaround for now.
- Frank
Wait for the next 5.0 update. .there's options like theater mode. ..and other brightness modes coming to wear
Sent from my SM-N910C using Tapatalk 2
Smart Brightness for Moto 360
Try the application "smart brightness for moto 360" from the Google play. With this application you can set a minimum brightness and better view in low light environments.
With the minimum set to 20% and auto brightness on you will get better battery life and better experience in dark situation.
[email protected] said:
Try the application "smart brightness for moto 360" from the Google play. With this application you can set a minimum brightness and better view in low light environments.
With the minimum set to 20% and auto brightness on you will get better battery life and better experience in dark situation.
Click to expand...
Click to collapse
Instant buy. Thanks allot, that makes in combination with the 5.0 update, Watchmaker and Bubble Cloud Launcher my watch perfect.
[email protected] said:
Try the application "smart brightness for moto 360" from the Google play. With this application you can set a minimum brightness and better view in low light environments.
With the minimum set to 20% and auto brightness on you will get better battery life and better experience in dark situation.
Click to expand...
Click to collapse
Sadly, the auto brightness doesn't seem to work...yeah, just realized that after using it for a week.
Smart Brightness for Moto 360
TheGoD said:
Sadly, the auto brightness doesn't seem to work...yeah, just realized that after using it for a week.
Click to expand...
Click to collapse
The application really works. If you want see how works, do the followings steps:
1. open Smart Brightness App
2. Turn on the application
3. Set the minimum brightness to 20%
4. Turn on the auto brightness.
5. Go to a dark room and wait until Moto360 to turn off the screen.
6. Touch the screen to wakeup the screen. (This is necessary because the Smart Brightness application start when the screen is on and stop when the screen is off).
You will see a clear image after this steps. Now go to the smart brightness app and turn it off (Using the on/off switch located at the top of the screen). Repeat the steps 5 and 6. Now the screen will look dark, because it is the factory auto brightness.
I recommend to use the 7 days trial. After 7 days after using it you will notice the difference.
I'm using this app over a month and works fine. Please let me know any other concern about the application.
For me its not the low light the problem as this works, is outside doens't go bright enough in direct sunlight
Enviado do meu HTC One através de Tapatalk
no problems
i have always used it, never experienced any problems
Moto 360 on the second generation does not work
Fabio
Can anyone help confirm if they see this behavior with their watch? I have always-on screen set to ON in the Android Wear app. (Tilt to wake and gestures are both OFF.) I have noticed that even on the stock Moon Phase face, if I don't touch the face for a while, the watch goes to sleep. By that I mean, the face is completely black, as if I turned off the always-on screen option.
I haven't determined yet if it's always after a specific amount of time. Seems to be at least 30 min, maybe an hour.
Is this normal behavior? I was under the impression that always on means always on, And that time in dim mode would always show.
You are correct.
bailyc said:
Can anyone help confirm if they see this behavior with their watch? I have always-on screen set to ON in the Android Wear app. (Tilt to wake and gestures are both OFF.) I have noticed that even on the stock Moon Phase face, if I don't touch the face for a while, the watch goes to sleep. By that I mean, the face is completely black, as if I turned off the always-on screen option.
I haven't determined yet if it's always after a specific amount of time. Seems to be at least 30 min, maybe an hour.
Is this normal behavior? I was under the impression that always on means always on, And that time in dim mode would always show.
Click to expand...
Click to collapse
You are correct, always on means always on, the only time the watch should sleep, is when you have it on the charger. You may have a bad install or worst case scenario a bad watch.
vvveith said:
You are correct, always on means always on, the only time to watch should sleep, is when you have it on the charger. You may have a bad install or worst case scenario a bad watch.
Click to expand...
Click to collapse
Ok, thanks for confirming! I definitely have something wrong, then. I've factory reset several times and even taken off most apps, and it still happens. Looks like it might be the watch.
I have similar problem - always ON, gestures off, but after about 10 seconds it changes watchface to some dark/black one.
I believe the Always on Feature is not for having your watch face on all the time, but rather it dims your watch face but you still can tell the time with just the darker screen. It's not going to keep your watch face fully lit if that option is turned on.
Well, then I`m selling mine. Why would I want all them beautiful watchfaces if I can`t have them always on?! That`s just stupid.
rbs_uk said:
Well, then I`m selling mine. Why would I want all them beautiful watchfaces if I can`t have them always on?! That`s just stupid.
Click to expand...
Click to collapse
Most of the folks that make the WatchMaker faces either just dim the face, or they make a dimmed mode face that looks like it has phosphorous markings. I personally make custom dimmed modes. My favorite method is to make a blood red version of the face with just the essential features. The moon phase ones can look BAD ASS with the blood red moon phase on a pure black background. This is the only watch I have ever actually gotten comments on in public. When people see it they notice that it ain't no normal watch, and it ain't no Apple watch.
rbs_uk said:
Well, then I`m selling mine. Why would I want all them beautiful watchfaces if I can`t have them always on?! That`s just stupid.
Click to expand...
Click to collapse
I think the battery life would just be too short if you left the face on all the time, all the time meaning the watch never went into dim mode. Just run tilt on, and don't wear the watch to loose. Especially at night if the watch never dimmed that would get annoying as hell it's so bright.
'god guys, really????
rbs_uk said:
I have similar problem - always ON, gestures off, but after about 10 seconds it changes watchface to some dark/black one.
Click to expand...
Click to collapse
Come on guys you do understand ambient mode right? When the main screen of the watch face shuts down it goes into ambient mode, which is simply black and white. Just like any pure android device. (i.e. Nexus 6) If you do not understand of know of this behaviour please stop posting and do some research. 'The watch is acting as it is suppose to in Android Wear. Just like notifications on a Nexus device. Google is your friend.
So is YouTube and understanding the android system as of today. Come on, get a clue.
Yeah I think if it was on all the time you'd be lucky to get even a few hours of battery life out of it....
falcon26 said:
Yeah I think if it was on all the time you'd be lucky to get even a few hours of battery life out of it....
Click to expand...
Click to collapse
Well, I know what I personally thought was confusing is that "always on" isn't actually always on when charging. When on the charger, display turns off completely after a time. That's different behavior from what I'm used to based on the Moto X, which has AMOLED and still displayed ambient information on the screen when charging/docked. I find it a little odd that there is no built-in charging/docked display that uses the ambient (dimmed) display mode.
But to be sure, my watch definitely had something wrong with it. I just received a replacement unit yesterday, so I'll be testing it out today to see if it's able to stay dimmed as it should when off the charger.
Be attencion with "always on" mode, this is screen after four days (contrast on level 3).
I've had the "Ranger" watch face on with a full colour ambient mode and not experiencing any burn-in. Every minute it shifts the image somewhat in order to reduce any burn in effect. See https://play.google.com/store/apps/details?id=co.smartwatchface.watch.face.ranger.military .
Just to cease any confusion. Always On means the screen is always on. After a few seconds, the screen will dim and go into a black/white ambient mode to reserve power.
The OP says his screen is turning completely off. So it seems there is a problem there. Every Watch face has a different ambient mode. Perhaps the one you are using has a broken ambient mode and not displaying data.
I found the best way to make a watch face is to build one yourself. Purje Black is awesome for this (truely amazing app). I am not going to do a full review but the transition between full on and ambient mode is animated, looks fantastic, has lots of Hotspots to launch various apps like weather, Google Fit data, etc, and displays it in a awesome format.
But the best feature is that you can customize the ambient mode separately from the actual face. They also support community made themes, so just browse their Google Plus theme page, find one you like, customize it to how you want it and save it.
Just be careful with your AMOLED screen that you don't have any information that is static in ambient mode, like numbers, hour marks, etc. I prefer a Digital clock/Calendar date on my Amoled, but have a nice looking analog with various information on my full face.
The device going to sleep is normal. It will go from full on to ambient mode and from there if the watch isn't moved for 30 minutes it will shut the screen off. See below from Google.
"You can set the display to show the time or turn off completely when you're not using the watch. If set to turn off, the screen will turn on when you turn your wrist or touch the screen.*
Tip: Letting your screen turn off when you're not using the watch will help improve battery life. If the watch hasn't moved for 30 minutes, the screen will turn off even if you have it set to remain always on. To wake your watch, tilt it or press the power button."
Sent from my Nexus 6 using Tapatalk
Hi
I'm trying to find an App for my watch that will keep the Watchface in Ambient mode for as long as i like (more than 24Hrs) even when it's not on my hand (not being moved).
Any ideas would be appretiated.
ausi said:
Hi
I'm trying to find an App for my watch that will keep the Watchface in Ambient mode for as long as i like (more than 24Hrs) even when it's not on my hand (not being moved).
Any ideas would be appretiated.
Click to expand...
Click to collapse
First off between the battery hit and possible screen damage I wouldn't recommend that. But I haven't seen any faces or apps that would accomplish this. And since that feature is inherent to wear it would probably take root to accomplish it anyway.
Sent from my Nexus 6 using Tapatalk
crawrj said:
First off between the battery hit and possible screen damage I wouldn't recommend that. But I haven't seen any faces or apps that would accomplish this. And since that feature is inherent to wear it would probably take root to accomplish it anyway.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Thanks, i have root..........but still cannot find an App to do this, i still would like to try.
Ho about limiting brightness to lower level than level 1. While I,m not using watch, just before it goes to ambient, I can See brightness dimmed to lower than minimum and after, ambient turns on, whitch is brighter. What can i do to use lowest levels all the time?
Stay Lit Wear
In case you haven't found it yet, search Google Play for "Stay Lit Wear."
Hi guys, any advice will be helpful.
Last day i was at office and was charging my Huawei watch, later i saw a yellow blink on the screen and when i tried to turn on the screen by taping on the screen or using wrist gesture the screen wont display.
Observations
1. Watch completely works perfect only the display is not showing up when you wake the or want to use the screen.
2. The touch is working. (can select even the screen is fully black and navigate)
3. On the "always on" mode the notifications and the always on display is showing. only the bright display is not working.
Disclaimer
Im new in posting threads in XDA, english is weak
I had a similar thing happen when I had a brightness app installed, I think it was Wear Brightness Control: https://play.google.com/store/apps/details?id=com.edgecontrols.android&hl=en
It took me forever to figure that out and get the app uninstalled, but my watch has been fine ever since. You might check to see if you have the same or a similar app installed on yours.
Hey all
I wonder if it is me who isn't too bright
Just updated from Android 8 to 11 (18.1) and my Moto 5GS is working well though the brightness is very bright. At first it was on adaptive which was all over the place, bright when you wanted it dim, vice versa or would dim/bright at random times.
I have tried to set the various settings and now it's stuck on BRIGHT, burning into your eyes bright. Even when the screen is off you can still see the screen is light up, light grey.
Is that a known issue or have I set a setting wrong somewhere? (Never seen so many options to just dim your screen, much be a Android 11 update)
Thanks for the great work, it's been a while since I rooted and installed new OS on my phone. So it was a bit hard to play around with fastboot, ADB and holding my breath when it rebooted